David S. Miller [Wed, 14 Mar 2018 17:50:47 +0000 (13:50 -0400)]
Merge tag 'linux-can-fixes-for-4.16-20180314' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-03-14
this is a pull request of two patches for net/master.
Both patches are by Andri Yngvason and fix problems in the cc770 driver,
that show up quite fast on RT systems, but also on non RT setups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Toppins [Wed, 14 Mar 2018 16:36:25 +0000 (12:36 -0400)]
tg3: prevent scheduling while atomic splat
The problem was introduced in commit 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs
because tp->lock spinlock is held which is obtained in tg3_start
by way of tg3_full_lock(), line 11571. The documentation for usleep_range()
specifically states it cannot be used inside a spinlock.
Fixes: 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Wed, 14 Mar 2018 09:21:14 +0000 (10:21 +0100)]
ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu
Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.
Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.
This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().
One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.
Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 14 Mar 2018 17:16:23 +0000 (13:16 -0400)]
Merge branch 'DPAA-Ethernet-fixes'
Madalin Bucur says:
====================
DPAA Ethernet fixes
This patch set is addressing several issues in the DPAA Ethernet
driver suite:
- module unload crash caused by wrong reference to device being left
in the cleanup code after the DSA related changes
- scheduling wile atomic bug in QMan code revealed during dpaa_eth
module unload
- a couple of error counter fixes, a duplicated init in dpaa_eth.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Camelia Groza [Wed, 14 Mar 2018 13:37:32 +0000 (08:37 -0500)]
dpaa_eth: remove duplicate increment of the tx_errors counter
The tx_errors counter is incremented by the dpaa_xmit caller.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Wed, 14 Mar 2018 13:37:29 +0000 (08:37 -0500)]
dpaa_eth: fix error in dpaa_remove()
The recent changes that make the driver probing compatible with DSA
were not propagated in the dpa_remove() function, breaking the
module unload function. Using the proper device to address the issue.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Wed, 14 Mar 2018 13:37:28 +0000 (08:37 -0500)]
soc/fsl/qbman: fix issue in qman_delete_cgr_safe()
The wait_for_completion() call in qman_delete_cgr_safe()
was triggering a scheduling while atomic bug, replacing the
kthread with a smp_call_function_single() call to fix it.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 14 Mar 2018 16:04:16 +0000 (09:04 -0700)]
net: use skb_to_full_sk() in skb_update_prio()
Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()
Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()
Also add the const qualifier to sock_cgroup_classid() for consistency.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andri Yngvason [Wed, 14 Mar 2018 11:52:57 +0000 (11:52 +0000)]
can: cc770: Fix queue stall & dropped RTR reply
While waiting for the TX object to send an RTR, an external message with a
matching id can overwrite the TX data. In this case we must call the rx
routine and then try transmitting the message that was overwritten again.
The queue was being stalled because the RX event did not generate an
interrupt to wake up the queue again and the TX event did not happen
because the TXRQST flag is reset by the chip when new data is received.
According to the CC770 datasheet the id of a message object should not be
changed while the MSGVAL bit is set. This has been fixed by resetting the
MSGVAL bit before modifying the object in the transmit function and setting
it after. It is not enough to set & reset CPUUPD.
It is important to keep the MSGVAL bit reset while the message object is
being modified. Otherwise, during RTR transmission, a frame with matching
id could trigger an rx-interrupt, which would cause a race condition
between the interrupt routine and the transmit function.
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com> Tested-by: Richard Weinberger <richard@nod.at> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Carpenter [Tue, 13 Mar 2018 09:09:38 +0000 (12:09 +0300)]
qed: Use after free in qed_rdma_free()
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line
before in qed_rdma_resc_free(p_hwfn).
Fixes: 9de506a547c0 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Refuse to insert 32 bit userspace socket policies on 64
bit systems like we do it for standard policies. We don't
have a compat layer, so inserting socket policies from
32 bit userspace will lead to a broken configuration.
2) Make the policy hold queue work without the flowcache.
Dummy bundles are not chached anymore, so we need to
generate a new one on each lookup as long as the SAs
are not yet in place.
3) Fix the validation of the esn replay attribute. The
The sanity check in verify_replay() is bypassed if
the XFRM_STATE_ESN flag is not set. Fix this by doing
the sanity check uncoditionally.
From Florian Westphal.
4) After most of the dst_entry garbage collection code
is removed, we may leak xfrm_dst entries as they are
neither cached nor tracked somewhere. Fix this by
reusing the 'uncached_list' to track xfrm_dst entries
too. From Xin Long.
5) Fix a rcu_read_lock/rcu_read_unlock imbalance in
xfrm_get_tos() From Xin Long.
6) Fix an infinite loop in xfrm_get_dst_nexthop. On
transport mode we fetch the child dst_entry after
we continue, so this pointer is never updated.
Fix this by fetching it before we continue.
7) Fix ESN sequence number gap after IPsec GSO packets.
We accidentally increment the sequence number counter
on the xfrm_state by one packet too much in the ESN
case. Fix this by setting the sequence number to the
correct value.
8) Reset the ethernet protocol after decapsulation only if a
mac header was set. Otherwise it breaks configurations
with TUN devices. From Yossi Kuperman.
9) Fix __this_cpu_read() usage in preemptible code. Use
this_cpu_read() instead in ipcomp_alloc_tfms().
From Greg Hackmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Hackmann [Wed, 7 Mar 2018 22:42:53 +0000 (14:42 -0800)]
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().
At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues. 3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context. On 3.15 and later, we
need to use this_cpu_read() instead.
syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:
Florian Fainelli [Mon, 12 Mar 2018 23:00:40 +0000 (16:00 -0700)]
net: dsa: Fix dsa_is_user_port() test inversion
During the conversion to dsa_is_user_port(), a condition ended up being
reversed, which would prevent the creation of any user port when using
the legacy binding and/or platform data, fix that.
Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 12 Mar 2018 19:21:08 +0000 (15:21 -0400)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-03-12
This series contains fixes to e1000e only.
Benjamin Poirier provides two fixes, first reverts commits that changed
what happens to the link status when there is an error. These commits
were to resolve a race condition, but in the process of fixing the race
condition, they changed the behavior when an error occurred. Second fix
resolves a race condition by not setting "get_link_status" to false
after checking the link.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Mon, 12 Mar 2018 13:54:24 +0000 (14:54 +0100)]
l2tp: fix races with ipv4-mapped ipv6 addresses
The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.
If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:
BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448
This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
explicitly invoking ipv6_addr_v4mapped() instead
The issue is apparently there since ancient times.
v1 -> v2: (many thanks to Guillaume)
- with csum issue introduced in v1
- replace pr_err with pr_debug
- fix build issue with IPV6 disabled
- move l2tp_sk_is_v4mapped in l2tp_core.c
v2 -> v3:
- don't update inet_daddr for v4mapped address, unneeded
- drop rendundant check at creation time
Reported-and-tested-by: syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Mon, 12 Mar 2018 13:54:23 +0000 (14:54 +0100)]
net: ipv6: keep sk status consistent after datagram connect failure
On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.
If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.
Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.
v1 -> v2:
- added missing Fixes tag
Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
link_active = true
/* link_active is true, wrongly, and stays so because
* get_link_status is false */
Avoid this problem by making sure that we don't set get_link_status = false
after having checked the link.
It seems this problem has been present since the introduction of e1000e.
Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
changed what happens to the link status when there is an error which
happens after "get_link_status = false" in the copper check_for_link
callbacks. Previously, such an error would be ignored and the link
considered up. After that commit, any error implies that the link is down.
Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link
up") and its followups. After reverting, the race condition described in
the log of commit 19110cfbb34d is reintroduced. It may still be triggered
by LSC events but this should keep the link down in case the link is
electrically unstable, as discussed. The race may no longer be
triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid
receiver overrun interrupt bursts") restored reading icr in the Other
handler.
Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The following patchset contains Netfilter fixes for your net tree, they are:
1) Fixed hashtable representation doesn't support timeout flag, skip it
otherwise rules to add elements from the packet fail bogusly fail with
EOPNOTSUPP.
2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel,
patch from Florian Westphal.
3) Sanitize proc names in several x_tables extensions, also from Florian.
4) Add sanitization to ebt_among wormhash logic, from Florian.
5) Missing release of hook array in flowtable.
====================
David S. Miller [Mon, 12 Mar 2018 15:16:40 +0000 (11:16 -0400)]
Merge tag 'linux-can-fixes-for-4.16-20180312' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-03-12
this is a pull reqeust of 6 patches for net/master.
The first patch is by Wolfram Sang and fixes a bitshift vs. comparison mistake
in the m_can driver. Two patches of Marek Vasut repair the error handling in
the ifi driver. The two patches by Stephane Grosjean fix a "echo_skb is
occupied!" bug in the peak/pcie_fd driver. Bich HEMON's patch adds pinctrl
select state calls to the m_can's driver to further improve power saving during
suspend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sat, 10 Mar 2018 10:57:50 +0000 (18:57 +0800)]
sock_diag: request _diag module only when the family or proto has been registered
Now when using 'ss' in iproute, kernel would try to load all _diag
modules, which also causes corresponding family and proto modules
to be loaded as well due to module dependencies.
Like after running 'ss', sctp, dccp, af_packet (if it works as a module)
would be loaded.
As these family and proto modules are loaded unintentionally, it
could cause some problems, like:
- Some debug tools use 'ss' to collect the socket info, which loads all
those diag and family and protocol modules. It's noisy for identifying
issues.
- Users usually expect to drop sctp init packet silently when they
have no sense of sctp protocol instead of sending abort back.
- It wastes resources (especially with multiple netns), and SCTP module
can't be unloaded once it's loaded.
...
In short, it's really inappropriate to have these family and proto
modules loaded unexpectedly when just doing debugging with inet_diag.
This patch is to introduce sock_load_diag_module() where it loads
the _diag module only when it's corresponding family or proto has
been already registered.
Note that we can't just load _diag module without the family or
proto loaded, as some symbols used in _diag module are from the
family or proto module.
v1->v2:
- move inet proto check to inet_diag to avoid a compiling err.
v2->v3:
- define sock_load_diag_module in sock.c and export one symbol
only.
- improve the changelog.
Reported-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Phil Sutter <phil@nwl.cc> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 12 Mar 2018 14:58:28 +0000 (10:58 -0400)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
There are 3 bug fixes in this series to fix regressions recently
introduced when adding the new ring reservations scheme. 2 minor
fixes in the TC Flower code to return standard errno values and
to elide some unnecessary warning dmesg. One Fixes the VLAN TCI
value passed to the stack by including the entire 16-bit VLAN TCI,
and the last fix is to check for valid VNIC ID before setting up or
shutting down LRO/GRO.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 10 Mar 2018 04:46:10 +0000 (23:46 -0500)]
bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().
During initialization, if we encounter errors, there is a code path that
calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID. This may cause a
warning in firmware logs.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Sat, 10 Mar 2018 04:46:09 +0000 (23:46 -0500)]
bnxt_en: close & open NIC, only when the interface is in running state.
bnxt_restore_pf_fw_resources routine frees PF resources by calling
close_nic and allocates the resources back, by doing open_nic. However,
this is not needed, if the PF is already in closed state.
This bug causes the driver to call open the device and call request_irq()
when it is not needed. Ultimately, pci_disable_msix() will crash
when bnxt_en is unloaded.
This patch fixes the problem by skipping __bnxt_close_nic and
__bnxt_open_nic inside bnxt_restore_pf_fw_resources routine, if the
interface is not running.
Fixes: 80fcaf46c092 ("bnxt_en: Restore MSIX after disabling SRIOV.") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Sat, 10 Mar 2018 04:46:08 +0000 (23:46 -0500)]
bnxt_en: Return standard Linux error codes for hwrm flow cmds.
Currently, internal error value is returned by the driver, when
hwrm_cfa_flow_alloc() fails due lack of resources. We should be returning
Linux errno value -ENOSPC instead.
This patch also converts other similar command errors to standard Linux errno
code (-EIO) in bnxt_tc.c
Fixes: db1d36a27324 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 10 Mar 2018 04:46:07 +0000 (23:46 -0500)]
bnxt_en: Fix regressions when setting up MQPRIO TX rings.
Recent changes added the bnxt_init_int_mode() call in the driver's open
path whenever ring reservations are changed. This call was previously
only called in the probe path. In the open path, if MQPRIO TC has been
setup, the bnxt_init_int_mode() call would reset and mess up the MQPRIO
per TC rings.
Fix it by not re-initilizing bp->tx_nr_rings_per_tc in
bnxt_init_int_mode(). Instead, initialize it in the probe path only
after the bnxt_init_int_mode() call.
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 10 Mar 2018 04:46:06 +0000 (23:46 -0500)]
bnxt_en: Pass complete VLAN TCI to the stack.
When receiving a packet with VLAN tag, pass the entire 16-bit TCI to the
stack when calling __vlan_hwaccel_put_tag(). The current code is only
passing the 12-bit tag and it is missing the priority bits.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Remove unwanted ovs-offload messages in some conditions
In some conditions when the driver fails to add a flow in HW and returns
an error back to the stack, the stack continues to invoke get_flow_stats()
and/or del_flow() on it. The driver fails these APIs with an error message
"no flow_node for cookie". The message gets logged repeatedly as long as
the stack keeps invoking these functions.
Fix this by removing the corresponding netdev_info() calls from these
functions.
Fixes: d7bc73053024 ("bnxt_en: add code to query TC flower offload stats") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eddie Wai [Sat, 10 Mar 2018 04:46:04 +0000 (23:46 -0500)]
bnxt_en: Fix vnic accounting in the bnxt_check_rings() path.
The number of vnics to check must be determined ahead of time because
only standard RX rings require vnics to support RFS. The logic is
similar to the ring reservation logic and we can now use the
refactored common functions to do most of the work in setting up
the firmware message.
Fixes: 8f23d638b36b ("bnxt_en: Expand bnxt_check_rings() to check all resources.") Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 10 Mar 2018 04:46:03 +0000 (23:46 -0500)]
bnxt_en: Refactor the functions to reserve hardware rings.
The bnxt_hwrm_reserve_{pf|vf}_rings() functions are very similar to
the bnxt_hwrm_check_{pf|vf}_rings() functions. Refactor the former
so that the latter can make use of common code in the next patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Brad Mouring [Thu, 8 Mar 2018 22:23:03 +0000 (16:23 -0600)]
net: phy: Tell caller result of phy_change()
In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification)
the phy_interrupt system was changed to use a traditional threaded
interrupt scheme instead of a workqueue approach.
With this change, the phy status check moved into phy_change, which
did not report back to the caller whether or not the interrupt was
handled. This means that, in the case of a shared phy interrupt,
only the first phydev's interrupt registers are checked (since
phy_interrupt() would always return IRQ_HANDLED). This leads to
interrupt storms when it is a secondary device that's actually the
interrupt source.
Signed-off-by: Brad Mouring <brad.mouring@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
can: peak/pcie_fd: remove useless code when interface starts
When an interface starts, the echo_skb array is empty and the network
queue should be started only. This patch replaces useless code and locks
when the internal RX_BARRIER message is received from the IP core, telling
the driver that tx may start.
This patch makes atomic the handling of the linux-can echo_skb array and
the network tx queue. This prevents from the "BUG! echo_skb is occupied!"
message to be printed by the linux-can core, in SMP environments.
Marek Vasut [Thu, 1 Mar 2018 18:34:00 +0000 (19:34 +0100)]
can: ifi: Repair the error handling
The new version of the IFI CANFD core has significantly less complex
error state indication logic. In particular, the warning/error state
bits are no longer all over the place, but are all present in the
STATUS register. Moreover, there is a new IRQ register bit indicating
transition between error states (active/warning/passive/busoff).
This patch makes use of this bit to weed out the obscure selective
INTERRUPT register clearing, which was used to carry over the error
state indication into the poll function. While at it, this patch
fixes the handling of the ACTIVE state, since the hardware provides
indication of the core being in ACTIVE state and that in turn fixes
the state transition indication toward userspace. Finally, register
reads in the poll function are moved to the matching subfunctions
since those are also no longer needed in the poll function.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Markus Marb <markus@marb.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marek Vasut [Mon, 5 Mar 2018 20:29:52 +0000 (21:29 +0100)]
can: ifi: Check core revision upon probe
Older versions of the core are not compatible with the driver due
to various intrusive fixes of the core. Read out the VER register,
check the core revision bitfield and verify if the core in use is
new enough (rev 2.1 or newer) to work correctly with this driver.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Markus Marb <markus@marb.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
zhangliping [Fri, 9 Mar 2018 02:08:50 +0000 (10:08 +0800)]
openvswitch: meter: fix the incorrect calculation of max delta_t
Max delat_t should be the full_bucket/rate instead of the full_bucket.
Also report EINVAL if the rate is zero.
Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Cc: Andy Zhou <azhou@ovn.org> Signed-off-by: zhangliping <zhangliping02@baidu.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Fri, 9 Mar 2018 00:17:23 +0000 (16:17 -0800)]
macvlan: filter out unsupported feature flags
Adding a macvlan device on top of a lowerdev that supports
the xfrm offloads fails with a new regression:
# ip link add link ens1f0 mv0 type macvlan
RTNETLINK answers: Operation not permitted
Tracing down the failure shows that the macvlan device inherits
the NETIF_F_HW_ESP and NETIF_F_HW_ESP_TX_CSUM feature flags
from the lowerdev, but with no dev->xfrmdev_ops API filled
in, it doesn't actually support xfrm. When the request is
made to add the new macvlan device, the XFRM listener for
NETDEV_REGISTER calls xfrm_api_check() which fails the new
registration because dev->xfrmdev_ops is NULL.
The macvlan creation succeeds when we filter out the ESP
feature flags in macvlan_fix_features(), so let's filter them
out like we're already filtering out ~NETIF_F_NETNS_LOCAL.
When XFRM support is added in the future, we can add the flags
into MACVLAN_FEATURES.
This same problem could crop up in the future with any other
new feature flags, so let's filter out any flags that aren't
defined as supported in macvlan.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter: bridge: ebt_among: add more missing match size checks
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
commit c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.
v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part
NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.
Tested with same rules from the earlier patch.
Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks") Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: ebtables: fix erroneous reject of last rule
The last rule in the blob has next_entry offset that is same as total size.
This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel.
David S. Miller [Fri, 9 Mar 2018 18:03:57 +0000 (13:03 -0500)]
Merge branch 'erspan-fixes'
William Tu says:
====================
a couple of erspan fixes
The series fixes a couple of erspan issues.
The first patch adds the erspan v2 proto type to the ip6 tunnel lookup.
The second patch improves the error handling when users screws the
version number in metadata. The final patch makes sure the skb has
enough headroom for pushing erspan header when xmit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
William Tu [Fri, 9 Mar 2018 15:34:41 +0000 (07:34 -0800)]
ip6erspan: improve error handling for erspan version number.
When users fill in incorrect erspan version number through
the struct erspan_metadata uapi, current code skips pushing
the erspan header but continue pushing the gre header, which
is incorrect. The patch fixes it by returning error.
Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 9 Mar 2018 18:02:14 +0000 (13:02 -0500)]
Merge branch 'mlxsw-ACL-and-mirroring-fixes'
Ido Schimmel says:
====================
mlxsw: ACL and mirroring fixes
The first patch fixes offload of rules using the 'pass' action. Instead
of continuing to evaluate lower priority rules, the binding is
terminated and the packet proceeds to the bridge and router blocks on
ingress, or goes out of the port on egress.
Second patch prevents the user from mirroring more than once from a
given {Port, Direction} as this is not supported by the device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 9 Mar 2018 13:33:53 +0000 (15:33 +0200)]
mlxsw: spectrum: Prevent duplicate mirrors
The Spectrum ASIC doesn't support mirroring more than once from a single
binding point (which is a port-direction pair). Therefore detect that a
second binding of a given binding point is attempted.
To that end, extend struct mlxsw_sp_span_inspected_port to track whether
a given binding point is bound or not. Extend
mlxsw_sp_span_entry_port_find() to look for ports based on the full
unique key: port number, direction, and boundness.
Besides fixing the overt bug where configured mirrors are not offloaded,
this also fixes a more subtle bug: mlxsw_sp_span_inspected_port_del()
just defers to mlxsw_sp_span_entry_bound_port_find(), and that used to
find the first port with the right number (disregarding the type). Thus
by adding and removing egress and ingress mirrors in the right order,
one could trick the system into believing it has no egress mirrors when
in fact it did have some. That then caused that
mlxsw_sp_span_port_mtu_update() didn't update mirroring buffer when MTU
was changed.
Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 9 Mar 2018 06:50:34 +0000 (14:50 +0800)]
vhost_net: examine pointer types during un-producing
After commit fc72d1d54dd9 ("tuntap: XDP transmission"), we can
actually queueing XDP pointers in the pointer ring, so we should
examine the pointer type before freeing the pointer.
Fixes: fc72d1d54dd9 ("tuntap: XDP transmission") Reported-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 9 Mar 2018 06:50:33 +0000 (14:50 +0800)]
vhost_net: keep private_data and rx_ring synced
We get pointer ring from the exported sock, this means we should keep
rx_ring and vq->private synced during both vq stop and backend set,
otherwise we may see stale rx_ring.
Fixes: c67df11f6e480 ("vhost_net: try batch dequing from skb array") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: c67df11f6e480 ("vhost_net: try batch dequing from skb array") Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Axtens [Fri, 9 Mar 2018 03:06:09 +0000 (14:06 +1100)]
net: use skb_is_gso_sctp() instead of open-coding
As well as the basic conversion, I noticed that a lot of the
SCTP code checks gso_type without first checking skb_is_gso()
so I have added that where appropriate.
Also, document the helper.
Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 5 Mar 2018 16:51:03 +0000 (08:51 -0800)]
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
A tun device type can trivially be set to arbitrary value using
TUNSETLINK ioctl().
Therefore, lowpan_device_event() must really check that ieee802154_ptr
is not NULL.
Fixes: 2c88b5283f60d ("ieee802154: 6lowpan: remove check on null") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
Fix the following slab-out-of-bounds kasan report in
ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not
linear and the accessed data are not in the linear data region of orig_skb.
[ 1503.122508] ==================================================================
[ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990
[ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932
[ 1503.158698] Memory state around the buggy address:
[ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1503.159338] ^
[ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1503.159785] ==================================================================
[ 1503.159964] Disabling lock debugging due to kernel taint
The test scenario to trigger the issue consists of 4 devices:
- H0: data sender, connected to LAN0
- H1: data receiver, connected to LAN1
- GW0 and GW1: routers between LAN0 and LAN1. Both of them have an
ethernet connection on LAN0 and LAN1
On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for
data from LAN0 to LAN1.
Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent
data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send
buffer size is set to 16K). While data streams are active flush the route
cache on HA multiple times.
I have not been able to identify a given commit that introduced the issue
since, using the reproducer described above, the kasan report has been
triggered from 4.14 and I have not gone back further.
Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
hv_netvsc: fix multicast flags and sync
This set of patches deals with the handling of multicast flags
and addresses in transparent VF mode. The recent set of patches
(in linux-net) had a couple of bugs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev_uc/mc_sync calls need to have the device address list
locked. This was spotted by running with lockdep enabled.
Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The rx_mode operation handler is different than other callbacks
in that is not always called with rtnl held. Therefore use
RCU to ensure that references are valid.
Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: avoid repeated updates of packet filter
The netvsc driver can get repeated calls to netvsc_rx_mode during
network setup; each of these calls ends up scheduling the lower
layers to update tha packet filter. This update requires an
request/response to the host. So avoid doing this if we already
know that the correct packet filter value is set.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The recent change to not always enable all multicast and broadcast
was broken; meant to set filter, not change flags.
Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 8 Mar 2018 16:44:04 +0000 (11:44 -0500)]
Merge tag 'wireless-drivers-for-davem-2018-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo:
====================
wireless-drivers fixes for 4.16
Quote a few fixes as I have not been able to send a pull request
earlier. Most of the fixes for iwlwifi but also few others, nothing
really standing out though.
iwlwifi
* fix a bogus warning when freeing a TFD
* fix severe throughput problem with 9000 series
* fix for a bug that caused queue hangs in certain situations
* fix for an issue with IBSS
* fix an issue with rate-scaling in AP-mode
* fix Channel Switch Announcement (CSA) issues with count 0 and 1
* some firmware debugging fixes
* remov a wrong error message when removing keys
* fix a firmware sysassert most usually triggered in IBSS
The __send_and_alloc_skb() receives a skb ptr as a parameter but in
case it fails the skb is not valid:
- Send failed and released the skb internally.
- Allocation failed.
The current code tries to release the skb in case of failure which
causes redundant freeing.
Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix various BPF helpers which adjust the skb and its GSO information
with regards to SCTP GSO. The latter is a special case where gso_size
is of value GSO_BY_FRAGS, so mangling that will end up corrupting
the skb, thus bail out when seeing SCTP GSO packets, from Daniel(s).
2) Fix a compilation error in bpftool where BPF_FS_MAGIC is not defined
due to too old kernel headers in the system, from Jiri.
3) Increase the number of x64 JIT passes in order to allow larger images
to converge instead of punting them to interpreter or having them
rejected when the interpreter is not built into the kernel, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 7 Mar 2018 21:10:01 +0000 (22:10 +0100)]
bpf, x64: increase number of passes
In Cilium some of the main programs we run today are hitting 9 passes
on x64's JIT compiler, and we've had cases already where we surpassed
the limit where the JIT then punts the program to the interpreter
instead, leading to insertion failures due to CONFIG_BPF_JIT_ALWAYS_ON
or insertion failures due to the prog array owner being JITed but the
program to insert not (both must have the same JITed/non-JITed property).
One concrete case the program image shrunk from 12,767 bytes down to
10,288 bytes where the image converged after 16 steps. I've measured
that this took 340us in the JIT until it converges on my i7-6600U. Thus,
increase the original limit we had from day one where the JIT covered
cBPF only back then before we run into the case (as similar with the
complexity limit) where we trip over this and hit program rejections.
Also add a cond_resched() into the compilation loop, the JIT process
runs without any locks and may sleep anyway.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Paul Moore [Tue, 6 Mar 2018 22:27:44 +0000 (17:27 -0500)]
net: don't unnecessarily load kernel modules in dev_ioctl()
Starting with v4.16-rc1 we've been seeing a higher than usual number
of requests for the kernel to load networking modules, even on events
which shouldn't trigger a module load (e.g. ioctl(TCGETS)). Stephen
Smalley suggested the problem may lie in commit 44c02a2c3dc5
("dev_ioctl(): move copyin/copyout to callers") which moves changes
the network dev_ioctl() function to always call dev_load(),
regardless of the requested ioctl.
This patch moves the dev_load() calls back into the individual ioctls
while preserving the rest of the original patch.
Reported-by: Dominick Grift <dac.override@gmail.com> Suggested-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: purge write queue upon aborting the connection
When the connection is aborted, there is no point in
keeping the packets on the write queue until the connection
is closed.
Similar to a27fd7a8ed38 ('tcp: purge write queue upon RST'),
this is essential for a correct MSG_ZEROCOPY implementation,
because userspace cannot call close(fd) before receiving
zerocopy signals even when the connection is aborted.
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Tue, 6 Mar 2018 19:57:01 +0000 (22:57 +0300)]
dccp: check sk for closed state in dccp_sendmsg()
dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL,
therefore if DCCP socket is disconnected and dccp_sendmsg() is
called after it, it will cause a NULL pointer dereference in
dccp_write_xmit().
This crash and the reproducer was reported by syzbot. Looks like
it is reproduced if commit 69c64866ce07 ("dccp: CVE-2017-8824:
use-after-free in DCCP code") is applied.
Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 6 Mar 2018 15:54:53 +0000 (07:54 -0800)]
l2tp: do not accept arbitrary sockets
syzkaller found an issue caused by lack of sufficient checks
in l2tp_tunnel_create()
RAW sockets can not be considered as UDP ones for instance.
In another patch, we shall replace all pr_err() by less intrusive
pr_debug() so that syzkaller can find other bugs faster. Acked-by: Guillaume Nault <g.nault@alphalink.fr> Acked-by: James Chapman <jchapman@katalix.com>
==================================================================
BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69
dst_release: dst:00000000d53d0d0f refcnt:-1
Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kirill Tkhai [Tue, 6 Mar 2018 15:46:39 +0000 (18:46 +0300)]
net: Fix hlist corruptions in inet_evict_bucket()
inet_evict_bucket() iterates global list, and
several tasks may call it in parallel. All of
them hash the same fq->list_evictor to different
lists, which leads to list corruption.
This patch makes fq be hashed to expired list
only if this has not been made yet by another
task. Since inet_frag_alloc() allocates fq
using kmem_cache_zalloc(), we may rely on
list_evictor is initially unhashed.
The problem seems to exist before async
pernet_operations, as there was possible to have
exit method to be executed in parallel with
inet_frags::frags_work, so I add two Fixes tags.
This also may go to stable.
Fixes: d1fe19444d82 "inet: frag: don't re-use chainlist for evictor" Fixes: f84c6821aa54 "net: Convert pernet_subsys, registered from inet_init()" Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is caused by the mdiobus being unregistered/free'd
and the code in phy_detach() attempting to manipulate mdio
related structures from unregister_netdev() calling close()
To fix this, we delay the mdiobus teardown until after
the netdev is deregistered.
Reported-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Tue, 6 Mar 2018 10:10:19 +0000 (11:10 +0100)]
ipv6: Reflect MTU changes on PMTU of exceptions for MTU-less routes
Currently, administrative MTU changes on a given netdevice are
not reflected on route exceptions for MTU-less routes, with a
set PMTU value, for that device:
# ip -6 route get 2001:db8::b
2001:db8::b from :: dev vti_a proto kernel src 2001:db8::a metric 256 pref medium
# ping6 -c 1 -q -s10000 2001:db8::b > /dev/null
# ip netns exec a ip -6 route get 2001:db8::b
2001:db8::b from :: dev vti_a src 2001:db8::a metric 0
cache expires 571sec mtu 4926 pref medium
# ip link set dev vti_a mtu 3000
# ip -6 route get 2001:db8::b
2001:db8::b from :: dev vti_a src 2001:db8::a metric 0
cache expires 571sec mtu 4926 pref medium
# ip link set dev vti_a mtu 9000
# ip -6 route get 2001:db8::b
2001:db8::b from :: dev vti_a src 2001:db8::a metric 0
cache expires 571sec mtu 4926 pref medium
The first issue is that since commit fb56be83e43d ("net-ipv6: on
device mtu change do not add mtu to mtu-less routes") we don't
call rt6_exceptions_update_pmtu() from rt6_mtu_change_route(),
which handles administrative MTU changes, if the regular route
is MTU-less.
However, PMTU exceptions should be always updated, as long as
RTAX_MTU is not locked. Keep the check for MTU-less main route,
as introduced by that commit, but, for exceptions,
call rt6_exceptions_update_pmtu() regardless of that check.
Once that is fixed, one problem remains: MTU changes are not
reflected if the new MTU is higher than the previous one,
because rt6_exceptions_update_pmtu() doesn't allow that. We
should instead allow PMTU increase if the old PMTU matches the
local MTU, as that implies that the old MTU was the lowest in the
path, and PMTU discovery might lead to different results.
The existing check in rt6_mtu_change_route() correctly took that
case into account (for regular routes only), so factor it out
and re-use it also in rt6_exceptions_update_pmtu().
While at it, fix comments style and grammar, and try to be a bit
more descriptive.
Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: fb56be83e43d ("net-ipv6: on device mtu change do not add mtu to mtu-less routes") Fixes: f5bbe7ee79c2 ("ipv6: prepare rt6_mtu_change() for exception table") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hemanth Puranik [Tue, 6 Mar 2018 02:48:06 +0000 (08:18 +0530)]
net: qcom/emac: Use proper free methods during TX
This patch fixes the warning messages/call traces seen if DMA debug is
enabled, In case of fragmented skb's memory was allocated using
dma_map_page but freed using dma_unmap_single. This patch modifies buffer
allocations in TX path to use dma_map_page in all the places and
dma_unmap_page while freeing the buffers.
Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 5 Mar 2018 21:50:46 +0000 (23:50 +0200)]
qed: Free RoCE ILT Memory on rmmod qedr
Rdma requires ILT Memory to be allocated for it's QPs.
Each ILT entry points to a page used by several Rdma QPs.
To avoid allocating all the memory in advance, the rdma
implementation dynamically allocates memory as more QPs are
added, however it does not dynamically free the memory.
The memory should have been freed on rmmod qedr, but isn't.
This patch adds the memory freeing on rmmod qedr (currently
it will be freed with qed is removed).
An outcome of this bug, is that if qedr is unloaded and loaded
without unloaded qed, there will be no more RoCE traffic.
The reason these are related, is that the logic of detecting the
first QP ever opened is by asking whether ILT memory for RoCE has
been allocated.
In addition, this patch modifies freeing of the Task context to
always use the PROTOCOLID_ROCE and not the protocol passed,
this is because task context for iWARP and ROCE both use the
ROCE protocol id, as opposed to the connection context.
Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Mar 2018 16:58:05 +0000 (11:58 -0500)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2018-03-05
This series contains fixes to e1000e only.
Benjamin Poirier provides all but one fix in this series, starting with
workaround for a VMWare e1000e emulation issue where ICR reads 0x0 on
the emulated device. Partially reverted a previous commit dealing with
the "Other" interrupt throttling to avoid unforeseen fallout from these
changes that are not strictly necessary. Restored the ICS write for
receive and transmit queue interrupts in the case that txq or rxq bits
were set in ICR and the Other interrupt handler read and cleared ICR
before the queue interrupt was raised. Fixed an bug where interrupts
may be missed if ICR is read while INT_ASSERTED is not set, so avoid the
problem by setting all bits related to events that can trigger the Other
interrupt in IMS. Fixed the return value for check_for_link() when
auto-negotiation is off.
Pierre-Yves Kerbrat fixes e1000e to use dma_zalloc_coherent() to make
sure the ring is memset to 0 to prevent the area from containing
garbage.
v2: added an additional e1000e fix to the series
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 5 Mar 2018 19:41:13 +0000 (11:41 -0800)]
net: usbnet: fix potential deadlock on 32bit hosts
Marek reported a LOCKDEP issue occurring on 32bit host,
that we tracked down to the fact that usbnet could either
run from soft or hard irqs.
This patch adds u64_stats_update_begin_irqsave() and
u64_stats_update_end_irqrestore() helpers to solve this case.
[ 17.768040] ================================
[ 17.772239] WARNING: inconsistent lock state
[ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted
[ 17.783329] --------------------------------
[ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>]
asix_rx_fixup_internal+0x188/0x288
[ 17.806790] {IN-HARDIRQ-W} state was registered at:
[ 17.811677] tx_complete+0x100/0x208
[ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0
[ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240
[ 17.824469] xhci_td_cleanup+0xf4/0x16c
[ 17.828367] xhci_irq+0xe74/0x2240
[ 17.831827] usb_hcd_irq+0x24/0x38
[ 17.835343] __handle_irq_event_percpu+0x98/0x510
[ 17.840111] handle_irq_event_percpu+0x1c/0x58
[ 17.844623] handle_irq_event+0x38/0x5c
[ 17.848519] handle_fasteoi_irq+0xa4/0x138
[ 17.852681] generic_handle_irq+0x18/0x28
[ 17.856760] __handle_domain_irq+0x6c/0xe4
[ 17.860941] gic_handle_irq+0x54/0xa0
[ 17.864666] __irq_svc+0x70/0xb0
[ 17.867964] arch_cpu_idle+0x20/0x3c
[ 17.871578] arch_cpu_idle+0x20/0x3c
[ 17.875190] do_idle+0x144/0x218
[ 17.878468] cpu_startup_entry+0x18/0x1c
[ 17.882454] start_kernel+0x394/0x400
[ 17.886177] irq event stamp: 161912
[ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>]
__netdev_alloc_skb+0xcc/0x140
[ 17.897893] hardirqs last disabled at (161911): [<d58261d0>]
__netdev_alloc_skb+0x94/0x140
[ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout
[ 17.906116] softirqs last enabled at (161904): [<387102ff>]
irq_enter+0x78/0x80
[ 17.906123] softirqs last disabled at (161905): [<cf4c628e>]
irq_exit+0x134/0x158
[ 17.925722].
[ 17.925722] other info that might help us debug this:
[ 17.933435] Possible unsafe locking scenario:
[ 17.933435].
[ 17.940331] CPU0
[ 17.942488] ----
[ 17.944894] lock(&syncp->seq#5);
[ 17.948274] <Interrupt>
[ 17.950847] lock(&syncp->seq#5);
[ 17.954386].
[ 17.954386] *** DEADLOCK ***
[ 17.954386].
[ 17.962422] no locks held by swapper/0/0.
Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Mon, 5 Mar 2018 17:52:54 +0000 (20:52 +0300)]
sch_netem: fix skb leak in netem_enqueue()
When we exceed current packets limit and we have more than one
segment in the list returned by skb_gso_segment(), netem drops
only the first one, skipping the rest, hence kmemleak reports:
Fix it by adding the rest of the segments, if any, to skb 'to_free'
list. Add new __qdisc_drop_all() and qdisc_drop_all() functions
because they can be useful in the future if we need to drop segmented
GSO packets in other places.
Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 7 Mar 2018 15:51:14 +0000 (10:51 -0500)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2018-03-05
Here are a few more Bluetooth fixes for the 4.16 kernel:
- btusb: reset/resume fixes for Yoga 920 and Dell OptiPlex 3060
- Fix for missing encryption refresh with the Security Manager protocol
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
On our mlx5 driver fs_core.c, we use the rhltable interface to store
flow groups. We noticed that sometimes we get a warning that flow group isn't
found at removal. This rare case was caused when a specific scenario happened,
insertion of a flow group with a similar match criteria (a duplicate),
but only where the flow group rhash_head was second (or not first)
on the relevant rhashtable bucket list.
The first patch fixes it, and the second one adds a test that show
it is now working.
Paul.
v3 --> v2 changes:
* added missing fix in rhashtable_lookup_one code path as well.
v1 --> v2 changes:
* Changed commit messages to better reflect the change
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Sun, 4 Mar 2018 15:29:49 +0000 (17:29 +0200)]
test_rhashtable: add test case for rhltable with duplicate objects
Tries to insert duplicates in the middle of bucket's chain:
bucket 1: [[val 21 (tid=1)]] -> [[ val 1 (tid=2), val 1 (tid=0) ]]
Reuses tid to distinguish the elements insertion order.
Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Sun, 4 Mar 2018 15:29:48 +0000 (17:29 +0200)]
rhashtable: Fix rhlist duplicates insertion
When inserting duplicate objects (those with the same key),
current rhlist implementation messes up the chain pointers by
updating the bucket pointer instead of prev next pointer to the
newly inserted node. This causes missing elements on removal and
travesal.
Fix that by properly updating pprev pointer to point to
the correct rhash_head next pointer.
Issue: 1241076
Change-Id: I86b2c140bcb4aeb10b70a72a267ff590bb2b17e7 Fixes: ca26893f05e8 ('rhashtable: Add rhlist interface') Signed-off-by: Paul Blakey <paulb@mellanox.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
dt-bindings: net: renesas-ravb: Make stream buffer optional
The Stream Buffer for EtherAVB-IF (STBE) is an optional component, and
is not present on all SoCs.
Document this in the DT bindings, including a list of SoCs that do have
it.
Fixes: 785ec87483d1e24a ("ravb: document R8A77970 bindings") Fixes: f231c4178a655b09 ("dt-bindings: net: renesas-ravb: Add support for R8A77995 RAVB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.
Cc: stable@vger.kernel.org # 3.10.y Reported-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Arend Van Spriel [Wed, 28 Feb 2018 20:15:19 +0000 (21:15 +0100)]
brcmfmac: add possibility to obtain firmware error
The feature module needs to evaluate the actual firmware error return
upon a control command. This adds a flag to struct brcmf_if that the
caller can set. This flag is checked to determine the error code that
needs to be returned.
Fixes: b69c1df47281 ("brcmfmac: separate firmware errors from i/o errors") Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Yossi Kuperman [Sun, 4 Mar 2018 19:03:52 +0000 (21:03 +0200)]
xfrm: Verify MAC header exists before overwriting eth_hdr(skb)->h_proto
Artem Savkov reported that commit 5efec5c655dd leads to a packet loss under
IPSec configuration. It appears that his setup consists of a TUN device,
which does not have a MAC header.
Make sure MAC header exists.
Note: TUN device sets a MAC header pointer, although it does not have one.
Jiri Benc [Tue, 6 Mar 2018 13:50:10 +0000 (14:50 +0100)]
tools: bpftool: fix compilation with older headers
Compilation of bpftool on a distro that lacks eBPF support in the installed
kernel headers fails with:
common.c: In function ‘is_bpffs’:
common.c:96:40: error: ‘BPF_FS_MAGIC’ undeclared (first use in this function)
return (unsigned long)st_fs.f_type == BPF_FS_MAGIC;
^
Fix this the same way it is already in tools/lib/bpf/libbpf.c and
tools/lib/api/fs/fs.c.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
====================
net: Use strlcpy() for ethtool::get_strings
After turning on KASAN on one of my systems, I started getting lots of out of
bounds errors while fetching a given port's statistics, and indeed using
memcpy() is unsafe for copying strings which have not been declared as an array
of ETH_GSTRING_LEN bytes, so let's use strlcpy() instead. This allows the best
of both worlds: we still keep the efficient memory usage of variably sized
strings, but we don't copy more than we need to.
Changes in v2:
- dropped the 3 other patches that were not necessary
- use strlcpy() instead of strncpy()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: broadcom: Use strlcpy() for ethtool::get_strings
Our statistics strings are allocated at initialization without being
bound to a specific size, yet, we would copy ETH_GSTRING_LEN bytes using
memcpy() which would create out of bounds accesses, this was flagged by
KASAN. Replace this with strlcpy() to make sure we are bound the source
buffer size and we also always NUL-terminate strings.
Fixes: 820ee17b8d3b ("net: phy: broadcom: Add support code for reading PHY counters") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-disco-kernel.git / log