Frank Min [Mon, 12 Jun 2017 02:57:43 +0000 (10:57 +0800)]
drm/amdgpu: According hardware design revert vce and uvd doorbell assignment
Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff
Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Frank Min [Mon, 12 Jun 2017 03:02:09 +0000 (11:02 +0800)]
drm/amdgpu: Skip uvd and vce ring test for SRIOV
Since rptr would not be accessed on later secure asics in sriov, remove
the ring test.
Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Frank Min [Mon, 12 Jun 2017 03:31:55 +0000 (11:31 +0800)]
drm/amdgpu/vce4: Remove vce interrupt enable related code for sriov
Interrupt enable is contained in vce init table and this register could
not be accessed in secure ASICs, so just remove it.
Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Frank Min [Thu, 15 Jun 2017 12:07:36 +0000 (20:07 +0800)]
drm/amdgpu: Enable uvd and vce gpu re-init for SRIOV gpu reset
Add uvd and vce re-init after gpu reset.
Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Frank Min [Mon, 12 Jun 2017 02:53:19 +0000 (10:53 +0800)]
drm/amdgpu: Clear vce&uvd ring wptr for SRIOV
MMSCH FW need to get the wptr from 0 after it get the mailbox request
from driver, since every time kick the mailbox, mmsch thinks that it
is the first time engine start to initialize.
Signed-off-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add support for filling a buffer with 64 bit value
That function will be used later to support setting a page table
block with 64 bit value.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Thu, 27 Jul 2017 15:50:31 +0000 (11:50 -0400)]
drm/amdgpu: disable vcn power control for now
The dpm control for vcn has been moved to firmware, kernel always spins
"amdgpu: [powerplay] pp_dpm_powergate_uvd was not implemented", each
time when application runs, disable it for now till pg/cg. Also remove
clock manual setting when dpm disabled, which was inherited from uvd.
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/dce_virtual: remove error message for vega10
Vega10 also support virtual display, remove the error message.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 10 Aug 2017 00:47:33 +0000 (10:47 +1000)]
Merge tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
- vc4: Add ioctl to allow attaching a label to a bo (Eric)
- Add new format/modifier blob plane property (Ben)
- armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko)
- [kinda uapi] fb_helper: Expose display_info size via fb_info (David)
Core Changes:
- Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf)
- Simplify atomic properties by removing the helpers and handling in core (Daniel)
Cc: Philippe CORNU <philippe.cornu@st.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Eric Anholt <eric@anholt.net> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Mark yao <mark.yao@rock-chips.com> Cc: Peter Rosin <peda@axentia.se> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: David Lechner <david@lechnology.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits)
drm: Nuke drm_atomic_legacy_backoff
drm: Nuke drm_atomic_helper_connector_dpms
drm: Nuke drm_atomic_helper_connector_set_property
drm: Nuke drm_atomic_helper_plane_set_property
drm: Nuke drm_atomic_helper_crtc_set_property
drm: Handle properties in the core for atomic drivers
drm: Don't update property values for atomic drivers
drm/omap: Rework the rotation-on-crtc hack
drm/radeon: Use the drm_driver.dumb_destroy default
drm/i915: Use the drm_driver.dumb_destroy default
drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
drm/fb-helper: pass physical dimensions to fbdev
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
drm/bridge: dw-hdmi: remove CEC engine register definitions
drm/bridge: dw-hdmi: add cec driver
drm/bridge: dw-hdmi: add missing cec_notifier_put
drm: remove unused and redundant callbacks
staging: vboxvideo: remove dead gamma lut code
drm: dw-hdmi-i2s: add missing company name on Copyright
...
Daniel Vetter [Tue, 25 Jul 2017 08:01:21 +0000 (10:01 +0200)]
drm: Nuke drm_atomic_helper_connector_dpms
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.
The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch Acked-by: Vincent Abriou <vincent.abriou@st.com>
Daniel Vetter [Tue, 25 Jul 2017 12:02:04 +0000 (14:02 +0200)]
drm: Handle properties in the core for atomic drivers
The reason behind the original indirection through the helper
functions was to allow existing drivers to overwrite how they handle
properties. For example when a vendor-specific userspace had
expectations that didn't match atomic. That seemed likely, since
atomic is standardizing a _lot_ more of the behaviour of a kms driver.
But 20 drivers later there's no such need at all. Worse, this forces
all drivers to hook up the default behaviour, breaking userspace if
they forget to do that. And it forces us to export a bunch of core
function just for those helpers.
And finally, these helpers are the last places using
drm_atomic_legacy_backoff() and the implicit acquire_ctx.
This patch here just implements the new behaviour and updates the
docs. Follow-up patches will garbage-collect all the dead code.
v2: Fixup docs even better!
v3: Make it actually work ...
v4: Drop the uses_atomic_modeset() checks from the previous patch
again, since they're now moved up in the callchain.
Daniel Vetter [Tue, 25 Jul 2017 12:01:37 +0000 (14:01 +0200)]
drm: Don't update property values for atomic drivers
Atomic drivers only use the property value store for immutable (i.e.
can't be set by userspace, but the kernel can still adjust it)
properties. The only tricky part is the removal of the update in
drm_atomic_helper_update_legacy_modeset_state().
for the legacy modeset code. The reason we needed this hack was that
i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of
the newer-ish drm_drv_uses_atomic_modeset(), which avoids such
troubles. With the correct feature checks this isn't needed anymore at
all.
Also make sure that drivers don't accidentally get this wrong by
making the exported version of drm_object_property_get_value() only
work for legacy drivers. Only gma500 uses it anyway.
v2: Fixup the uses_atomic_modeset() checks (Maarten)
I want/need to rework the core property handling, and this hack is
getting in the way. But since it's a non-standard propety only used by
legacy userspace we know that this will only every be called from
ioctl code. And never on some other free-standing state struct, where
this old hack wouldn't work either.
v2: don't forget zorder and get_property!
v3: Shadow the legacy state to avoid locking issues in get_property
(Maarten).
v4: Review from Laurent
- Move struct omap_crtc_state into omap_crtc.c
- Clean up comments.
- Don't forget to copy the shadowed state over on duplicate.
v5: Don't forget to update the reset handler (Maarten).
v6: Update omap_crtc_state shadow values in omap_crtc_atomic_check (Maarten).
v7:
- Fix get_property to return 0 and set value in *val (Maarten).
- Update comment in set_property for changes in v6 (Maarten).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (v4) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (v4) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a6a10a4f-2ebc-5f81-00bd-5e906967f384@linux.intel.com
Jose Abreu [Fri, 23 Jun 2017 09:36:44 +0000 (10:36 +0100)]
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
Currently HDMI 2.0 PHYs do not have a default configuration function.
As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D
PHYs we can provide the same default configuration function for both
and still let user overwrite this with custom configuration function
if needed.
If, for some reason, the PHY is custom or has a register different
register layout then custom configuration function *must* be provided
in order for the system to work correctly. As we prefer the pdata
provided configuration function over the internal one this change
will not make any impact in custom platforms.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Mark Yao <mark.yao@rock-chips.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Heiko Stübner <heiko@sntech.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/185ccf7d4473fa557044732402ca20b3d4007952.1498209896.git.joabreu@synopsys.com
David Lechner [Fri, 4 Aug 2017 16:25:24 +0000 (11:25 -0500)]
drm/fb-helper: pass physical dimensions to fbdev
The fbdev subsystem has a place for physical dimensions (width and height
in mm) that is readable by userspace. Since DRM also knows these
dimensions, pass this information to the fbdev device.
This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs()
because fb_helper->fbdev may be NULL in drm_setup_crtcs().
Mikko Rapeli [Sun, 6 Aug 2017 16:44:23 +0000 (18:44 +0200)]
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
These are defined in linux/types.h or drm/drm.h. Fixes
user space compilation errors like:
drm/armada_drm.h:26:2: error: unknown type name ‘uint32_t’
uint32_t handle;
^~~~~~~~
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170806164428.2273-33-mikko.rapeli@iki.fi
Russell King [Mon, 31 Jul 2017 14:29:46 +0000 (15:29 +0100)]
drm/bridge: dw-hdmi: add better clock disable control
The video setup path aways sets the clock disable register to a specific
value, which has the effect of disabling the CEC engine. When we add the
CEC driver, this becomes a problem.
Fix this by only setting/clearing the bits that the video path needs to.
Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/E1dcBha-00088l-DE@rmk-PC.armlinux.org.uk
Peter Rosin [Thu, 13 Jul 2017 16:25:37 +0000 (18:25 +0200)]
drm: stm: remove dead code and pointless local lut storage
The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.
Peter Rosin [Thu, 13 Jul 2017 16:25:36 +0000 (18:25 +0200)]
drm: radeon: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:35 +0000 (18:25 +0200)]
drm: nouveau: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:34 +0000 (18:25 +0200)]
drm: mgag200: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:33 +0000 (18:25 +0200)]
drm: i915: remove dead code and pointless local lut storage
The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.
Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.
Peter Rosin [Thu, 13 Jul 2017 16:25:32 +0000 (18:25 +0200)]
drm: gma500: remove dead code and pointless local lut storage
The redundant fb helpers .gamma_set and .gamma_get are no longer
used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:31 +0000 (18:25 +0200)]
drm: cirrus: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:30 +0000 (18:25 +0200)]
drm: ast: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Peter Rosin [Thu, 13 Jul 2017 16:25:28 +0000 (18:25 +0200)]
drm: amd: remove dead code and pointless local lut storage
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Mark yao [Mon, 31 Jul 2017 09:49:50 +0000 (17:49 +0800)]
drm/rockchip: vop: round_up pitches to word align
VOP pitch register is word align, need align to word.
VOP_WIN0_VIR:
bit[31:16] win0_vir_stride_uv
Number of words of Win0 uv Virtual width
bit[15:0] win0_vir_width
Number of words of Win0 yrgb Virtual width
ARGB888 : win0_vir_width
RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
RGB565 : ceil(win0_vir_width/2)
YUV : ceil(win0_vir_width/4)
Mark yao [Mon, 31 Jul 2017 09:49:42 +0000 (17:49 +0800)]
drm/rockchip: vop: fix iommu page fault when resume
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Arvind Yadav [Tue, 1 Aug 2017 16:01:56 +0000 (21:31 +0530)]
agp: nvidia: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:55 +0000 (21:31 +0530)]
agp: amd64: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:54 +0000 (21:31 +0530)]
agp: sis: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:53 +0000 (21:31 +0530)]
agp: efficeon: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:52 +0000 (21:31 +0530)]
agp: ati: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:51 +0000 (21:31 +0530)]
agp: ali: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:50 +0000 (21:31 +0530)]
agp: intel: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:49 +0000 (21:31 +0530)]
agp: amd-k7: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Arvind Yadav [Tue, 1 Aug 2017 16:01:48 +0000 (21:31 +0530)]
agp: uninorth: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 4 Aug 2017 01:41:24 +0000 (11:41 +1000)]
Merge tag 'drm-next-du-20170803' of git://linuxtv.org/pinchartl/media into drm-next
rcar-du updates, contains vsp1 updates as well.
* tag 'drm-next-du-20170803' of git://linuxtv.org/pinchartl/media: (24 commits)
drm: rcar-du: Use new iterator macros
drm: rcar-du: Repair vblank for DRM page flips using the VSP
drm: rcar-du: Fix race condition when disabling planes at CRTC stop
drm: rcar-du: Wait for flip completion instead of vblank in commit tail
drm: rcar-du: Use the VBK interrupt for vblank events
drm: rcar-du: Add HDMI outputs to R8A7796 device description
drm: rcar-du: Remove an unneeded NULL check
drm: rcar-du: Setup planes before enabling CRTC to avoid flicker
drm: rcar-du: Configure DPAD0 routing through last group on Gen3
drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
drm: rcar-du: Support multiple sources from the same VSP
drm: rcar-du: Fix comments to comply with the kernel coding style
drm: rcar-du: Use of_graph_get_remote_endpoint()
v4l: vsp1: Add support for header display lists in continuous mode
v4l: vsp1: Add support for multiple DRM pipelines
v4l: vsp1: Add support for multiple LIF instances
v4l: vsp1: Add support for new VSP2-BS, VSP2-DL and VSP2-D instances
v4l: vsp1: Add support for the BRS entity
v4l: vsp1: Add pipe index argument to the VSP-DU API
v4l: vsp1: Don't create links for DRM pipeline
...
David Lechner [Thu, 3 Aug 2017 16:19:08 +0000 (11:19 -0500)]
drm/fb-helper: add new drm_setup_crtcs_fb() function
This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.
There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.
This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.
Cihangir Akturk [Thu, 3 Aug 2017 11:58:20 +0000 (14:58 +0300)]
drm/atmel-hlcdc: switch to drm_*{get,put} helpers
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change
at runtime. All functions working with drm_plane_helper_funcs and
drm_plane_funcs work with const. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6072 596 0 6668 1a0c atmel_hlcdc_plane.o
File size After adding 'const':
text data bss dec hex filename
6218 436 0 6654 19fe atmel_hlcdc_plane.o
for_each_obj_in_state is about to be removed, so use the correct new
iterator macros.
Also look at new_plane_state instead of plane->state when looking up
the hw planes in use. They should be the same except when reallocating,
(in which case this code is skipped) and we should really stop looking
at obj->state whenever possible.
Kieran Bingham [Fri, 30 Jun 2017 12:14:11 +0000 (13:14 +0100)]
drm: rcar-du: Repair vblank for DRM page flips using the VSP
The driver recently switched from handling page flip completion in the
DU vertical blanking handler to the VSP frame end handler to fix a race
condition. This unfortunately resulted in incorrect timestamps in the
vertical blanking events sent to userspace as vertical blanking is now
handled after sending the event.
To fix this we must reverse the order of the two operations. The easiest
way is to handle vertical blanking in the VSP frame end handler before
sending the event. The VSP frame end interrupt occurs approximately 50µs
earlier than the DU frame end interrupt, but this should not cause any
undue harm.
As we need to handle vertical blanking even when page flip completion is
delayed, the VSP driver now needs to call the frame end completion
callback unconditionally, with a new argument to report whether page
flip has completed.
With this new scheme the DU vertical blanking interrupt isn't needed
anymore, so we can stop enabling it.
drm: rcar-du: Fix race condition when disabling planes at CRTC stop
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
drm: rcar-du: Wait for flip completion instead of vblank in commit tail
Page flips can take more than one vertical blanking to complete if
arming the page flips races with the vertical blanking interrupt.
Waiting for one vblank to complete the atomic commit in the commit tail
handler is thus incorrect, and can lead to framebuffers being released
while still being scanned out.
Fix this by waiting for flip completion instead, using the
drm_atomic_helper_wait_for_flip_done() helper.
Fixes: 0d230422d256 ("drm: rcar-du: Register a completion callback with VSP1") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
drm: rcar-du: Use the VBK interrupt for vblank events
When implementing support for interlaced modes, the driver switched from
reporting vblank events on the vertical blanking (VBK) interrupt to the
frame end interrupt (FRM). This incorrectly divided the reported refresh
rate by two. Fix it by moving back to the VBK interrupt.
Fixes: 906eff7fcada ("drm: rcar-du: Implement support for interlaced modes") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Dan Carpenter [Fri, 30 Jun 2017 08:00:12 +0000 (11:00 +0300)]
drm: rcar-du: Remove an unneeded NULL check
"params" can't be NULL here. The next lines assume that we either
hit the break statement of "params->mpixelclock == ~0UL". The
inconsistent NULL checking makes static checkers complain. I've just
removed the test.
Laurent Pinchart [Tue, 27 Jun 2017 10:18:38 +0000 (13:18 +0300)]
drm: rcar-du: Setup planes before enabling CRTC to avoid flicker
Commit 52055bafa1ff ("drm: rcar-du: Move plane commit code from CRTC
start to CRTC resume") changed the order of the plane commit and CRTC
enable operations to accommodate the runtime PM requirements. However,
this introduced corruption in the first displayed frame, as the CRTC is
now enabled without any plane configured. On Gen2 hardware the first
frame will be black and likely unnoticed, but on Gen3 hardware we end up
starting the display before the VSP compositor, which is more
noticeable.
To fix this, revert the order of the commit operations back, and handle
runtime PM requirements in the CRTC .atomic_begin() and .atomic_enable()
helper operation handlers.
Laurent Pinchart [Mon, 26 Jun 2017 13:41:47 +0000 (16:41 +0300)]
drm: rcar-du: Configure DPAD0 routing through last group on Gen3
On Gen3 SoCs DPAD0 routing is configured through the last CRTC group,
unlike on Gen2 where it is configured through the first CRTC group. Fix
the driver accordingly.
Laurent Pinchart [Tue, 20 Jun 2017 19:35:44 +0000 (22:35 +0300)]
drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
The H3 ES1.x exhibits dot clock duty cycle stability issues. We can work
around them by configuring the DPLL to twice the desired frequency,
coupled with a /2 post-divider. This isn't needed on other SoCs and
breaks HDMI output on M3-W for a currently unknown reason, so restrict
the workaround to H3 ES1.x.
From an implementation point of view, move work around handling outside
of the rcar_du_dpll_divider() function by requesting a x2 DPLL output
frequency explicitly. The existing post-divider calculation mechanism
will then take care of dividing the clock by two automatically.
While at it, print a more useful debugging message to ease debugging
clock rate issues.
Laurent Pinchart [Mon, 29 May 2017 10:41:31 +0000 (13:41 +0300)]
v4l: vsp1: Add support for header display lists in continuous mode
The VSP supports both header and headerless display lists. The latter is
easier to use when the VSP feeds data directly to the DU in continuous
mode, and the driver thus uses headerless display lists for DU operation
and header display lists otherwise.
Headerless display lists are only available on WPF.0. This has never
been an issue so far, as only WPF.0 is connected to the DU. However, on
H3 ES2.0, the VSP-DL instance has both WPF.0 and WPF.1 connected to the
DU. We thus can't use headerless display lists unconditionally for DU
operation.
Implement support for continuous mode with header display lists, and use
it for DU operation on WPF outputs that don't support headerless mode.
Laurent Pinchart [Fri, 23 Jun 2017 13:20:47 +0000 (16:20 +0300)]
v4l: vsp1: Add support for multiple DRM pipelines
The R-Car H3 ES2.0 VSP-DL instance has two LIF entities and can drive
two display pipelines at the same time. Refactor the VSP DRM code to
support that by introducing a vsp_drm_pipeline object that models one
display pipeline.
Laurent Pinchart [Wed, 21 Jun 2017 13:10:18 +0000 (16:10 +0300)]
v4l: vsp1: Add support for multiple LIF instances
The VSP2-DL instance (present in the H3 ES2.0 and M3-N SoCs) has two LIF
instances. Adapt the driver infrastructure to support multiple LIFs.
Support for multiple display pipelines will be added separately.
The change to the entity routing table removes the ability to connect
the LIF output to the HGO or HGT histogram generators. This feature is
only available on Gen2 hardware, isn't supported by the rest of the
driver, and has no known use case, so this isn't an issue.
v4l: vsp1: Add support for new VSP2-BS, VSP2-DL and VSP2-D instances
New Gen3 SoCs come with two new VSP2 variants names VSP2-BS and VSP2-DL,
as well as a new VSP2-D variant on V3M and V3H SoCs. Add new entries for
them in the VSP device info table.
Jose Abreu [Mon, 17 Jul 2017 12:08:27 +0000 (13:08 +0100)]
drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback
Currently we expect that clock driver produces the exact same value
as we are requiring. There can, and will, be some deviation
however so we need to take that into account instead of just
rejecting the mode.
According to the HDMI spec we have a max of +-0.5% for the pixel clock
frequency deviation. Lets take that into an advantage and use it to
calculate how much deviation we can support.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Jose Abreu [Mon, 17 Jul 2017 12:08:25 +0000 (13:08 +0100)]
drm: arcpgu: Fix mmap() callback
Now that ARC properly supports DMA mmap() we can use the standard
CMA helper to map dumb buffers. This makes ARC PGU works with
standard DRM consumer applications like, for example, mpv/mplayer
via DRM. While at it, use the DEFINE_DRM_GEM_CMA_FOPS() helper.
This fixes the use of dumb buffers.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: 0c4250e7b15e ("drm: Add support of ARC PGU display controller") Cc: Carlos Palminha <palminha@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Dave Airlie [Wed, 2 Aug 2017 02:43:12 +0000 (12:43 +1000)]
Merge branch 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Stop reprogramming the MC, the vbios already does this in asic_init
- Reduce internal gart to 256M (this does not affect the ttm GTT pool size)
- Initial support for huge pages
- Rework bo migration logic
- Lots of improvements for vega10
- Powerplay fixes
- Additional Raven enablement
- SR-IOV improvements
- Bug fixes
- Code cleanup
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (138 commits)
drm/amdgpu: fix header on gfx9 clear state
drm/amdgpu: reduce the time of reading VBIOS
drm/amdgpu/virtual_dce: Remove the rmmod error message
drm/amdgpu/gmc9: disable legacy vga features in gmc init
drm/amdgpu/gmc8: disable legacy vga features in gmc init
drm/amdgpu/gmc7: disable legacy vga features in gmc init
drm/amdgpu/gmc6: disable legacy vga features in gmc init (v2)
drm/radeon: Set depth on low mem to 16 bpp instead of 8 bpp
drm/amdgpu: fix the incorrect scratch reg number on gfx v6
drm/amdgpu: fix the incorrect scratch reg number on gfx v7
drm/amdgpu: fix the incorrect scratch reg number on gfx v8
drm/amdgpu: fix the incorrect scratch reg number on gfx v9
drm/amd/powerplay: add support for 3DP 4K@120Hz on vega10.
drm/amdgpu: enable huge page handling in the VM v5
drm/amdgpu: increase fragmentation size for Vega10 v2
drm/amdgpu: ttm_bind only when user needs gpu_addr in bo pin
drm/amdgpu: correct clock info for SRIOV
drm/amdgpu/gmc8: SRIOV need to program fb location
drm/amdgpu: disable firmware loading for psp v10
drm/amdgpu:fix gfx fence allocate size
...
drm/ast: Actually load DP501 firmware when required
The ast driver has a code to load the DP501 firmware, but it's never
used. This patch implements its actual usage by requesting the
firmware on demand, and release the firmware at exit as well.
Also the path contains a few cleanups and makes relevant functions
static.
v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)
v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)
v4:
Use plane->modifier_count instead of recounting (Daniel)
v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size
Cc: Rob Clark <robdclark@gmail.com> Cc: Kristian H. Kristensen <hoegsberg@gmail.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3) Signed-off-by: Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
Ben Widawsky [Mon, 24 Jul 2017 03:46:38 +0000 (20:46 -0700)]
drm: Plumb modifiers through plane init
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
drm/nouveau: Convert nouveau to use new iterator macros, v2.
Use the new atomic iterator macros, the old ones are about to be
removed. With the new macros, it's more easy to get old and new state so
get them from the macros instead of from obj->state.
Changes since v1:
- Don't mix up old and new state. (danvet)
- Rebase on top of interruptible swap_state changes.
dma-buf/sw_sync: clean up list before signaling the fence
If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.
dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.
We fix that by changing the order operation and clean up the list and
rb-tree first.
v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)
projects / mirror_ubuntu-disco-kernel.git / log