staging: most: rename DIM_Shutdown to dim_shutdown

This patch renames DIM_Shutdown to dim_shutdown to avoid camelcase
found by checkpatch.

CHECK: Avoid CamelCase: <DIM_Shutdown>
FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:676:

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: rename DIM_Startup to dim_startup

This patch renames DIM_Startup to dim_startup to avoid camelcase
found by checkpatch.

CHECK: Avoid CamelCase: <DIM_Startup>
FILE: drivers/staging/most/hdm-dim2/dim2_hal.c:653:

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: add spaces preferred around that '<<'

This patch adds space around '<<' found by checkpatch.

CHECK: spaces preferred around that '<<' (ctx:VxV)
FILE: drivers/staging/most/hdm-dim2/dim2_reg.h:69:

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove blank line after an open brace

This patch removes blank line after an open brace found by checkpatch.
CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove multiple blank lines

This patch removes multiple blank lines found by checkpatch.
CHECK: Please don't use multiple blank lines

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: goto removed

malloc error handling moved into one place.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: goto replaced by 'else' branch

goto is not needed here.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: unused macros removed

IS_* and GET_CVID_* macros have not been used.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rarely used macros replaced by their definitions

IS_* macros (except one) occur only once.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: for loop instead of while loop used

The range of elements to fill with zeros is determined by using a roundup macro

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: offset renamed to write_address

This name is better suited for this variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: pu4BytePtr renamed to dword_buffer

This name is better suited for this variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: buf_ptr renamed to byte_buffer

This name is better suited for this variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: unnessesary braces for single statement block removed

checkpatch fix:
WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: unnecessary initialization removed

It is superfluous.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: types of local variables conformed with types of function arguments

The array should not change in any case.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: buf_ptr variable completely defined in a single line

It is simpler.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: offset increment placed into for loop header

It makes the code little easier.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: unnecessary branching removed

If the 'remain' is zero, the loop is not executed at all.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: unnecessary variable override removed

Variable value calculated in the previous loop.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: offset variable replaced by its value

It is now possible to get rid of re-initializing the offset variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: initial value placed in the variable

Line become shorter.
After the loop offset variable points to the location following insertion.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: assigning a value to the variable is replaced by the increment

It is made to the initial value could be placed in the offset variable.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: *(ptr + i) replaced by ptr[i] in _rtl88e_fw_block_write

It is better to read.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: fix space prohibited before that ','

This patch fixes the following checkpatch.pl error:
fix space prohibited before that ','

Signed-off-by: Abdul Hussain <hussain.abdul@outlook.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: 'infinite' loop removed

The body of this loop is executed only once, so it can be removed.
In this loop no keyword 'continue', only 'break' at the end.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: while loop replaced by for loop

Here is more suitable for loop.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: do .. while (0) loop replaced by while (...) loop

It is a simple and clear representation of this loop.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add missing delay in polling loops.

Previously the code could exit with failure too early.

Signed-off-by: Rémy Oudompheng <remyoudompheng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: jiffies are unsigned long

Remove rtw_get_passing_time_ms function and adjust type
of relevant variables.

Signed-off-by: Rémy Oudompheng <remyoudompheng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: ldlm_pool: Drop unneeded wrapper function

Remove the function ldlm_pool_set_limit() and replace its calls with the
function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: ldlm_pool: Drop wrapper function

Remove the function ldlm_pool_get_limit() and replace its calls with the
function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: ldlm_pool: Remove unneeded wrapper function

Remove the function ldlm_pl2ns() and replace its calls with the function
it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: tracefile: Remove function prototype

Remove the prototype of function cfs_trace_free_string_buffer() as it is
no longer needed.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: tracefile: Remove wrapper function

Remove the function cfs_trace_free_string_buffer() as it can be replaced
with the standard function kfree().

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: module: Replace function calls

Replace the calls of function cfs_trace_free_string_buffer() with
kfree() as the former function is not required.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: dir: Remove wrapper function

Remove the function ll_check_page() and replace all its calls with the
function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: klnds: socklnd: Move extern declarations to header

This patch moves extern declarations in socklnd_lib.c to the respective
header file, 'socklnd.h'.

This patch also removes extern keyword from function declarations
since functions have the extern specifier by default.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Delete an unnecessary variable initialisation in class_register_type()

The variable "rc" will be eventually set to an error return code in the
class_register_type() function.
Thus let us omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix 'error handling' issues for libcfs workitem.c

Fix 'error handling' issues found by Coverity version 6.5.1:
Unchecked return value (CHECKED_RETURN)
Calling function without checking return value.

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3427
Reviewed-on: http://review.whamcloud.com/7103
Reviewed-by: Bobbie Lind <bobbie.j.lind@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove page_collection::pc_lock in libcfs

page_collection::pc_lock is supposed to protect race between
functions called by smp_call_function(), however we don't have
this use-case for ages and page_collection only lives in stack
of thread, so it is safe to remove it.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3055
Reviewed-on: http://review.whamcloud.com/7660
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: race condition for check/use cfs_fail_val

There are some race conditions when check/use cfs_fail_val.
For example: when inject failure stub for LFSCK test as following:

764   if (OBD_FAIL_CHECK(OBD_FAIL_LFSCK_DELAY2) &&
765       cfs_fail_val > 0) {
766           struct l_wait_info lwi;
767
768           lwi = LWI_TIMEOUT(cfs_time_seconds(cfs_fail_val),
769                             NULL, NULL);
770           l_wait_event(thread->t_ctl_waitq,
771                        !thread_is_running(thread),
772                        &lwi);
773
774           if (unlikely(!thread_is_running(thread))) {
775                   CDEBUG(D_LFSCK, "%s: scan dir exit for engine "
776                          "stop, parent "DFID", cookie "LPX64"n",
777                          lfsck_lfsck2name(lfsck),
778                          PFID(lfsck_dto2fid(dir)),
779                          lfsck->li_cookie_dir);
780                   RETURN(0);
781           }
782   }

The "cfs_fail_val" may be changed as zero by others after the check
at the line 765 but before using it at the line 768. Then the LFSCK
engine will fall into "wait" until someone run "lfsck_stop".

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6146
Reviewed-on: http://review.whamcloud.com/13481
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Update module author to OpenSFS

The modinfo data has gone stale for the author information.
This patch changes all the MODULE_AUTHOR to OpenSFS.

Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6204
Reviewed-on: http://review.whamcloud.com/16132
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix possible NULL pointer dereference in lprocfs_status.c

The imp->imp_connection really could be NULL, we better check for it
before dereferencing it in taht call to libcfs_nid2str_r.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6507
Reviewed-on: http://review.whamcloud.com/14808
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix buffer overflow of string buffer

Buffer overflow of string buffer due to non null terminated string.
Use strlcpy() when it's justifiable.
Use sizeof(var) instead of constants.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4629
Reviewed-on: http://review.whamcloud.com/9389
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove libcfs_debug_set_level prototype from libcfs_private.h

The function libcfs_debug_set_level is used only internally so no reason
to expose it in libcfs_private.h. This is broken out from LU-5829 patch
http://review.whamcloud.com/13319.

Signed-off-by: frank zago <fzago@cray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unnecessary EXPORT_SYMBOL in libcfs

A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.

Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13319
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: wrong parameter to cfs_hash_keycpy

cfs_hash_rehash_key() passed wrong parameter to cfs_hash_keycpy,
hnode should be the second parameter not the third one.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4362
Reviewed-on: http://review.whamcloud.com/8509
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused variable

The "->lr_lvb_data" struct member is never used.  Delete it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest.h: replace IS_PO2 by is_power_of_2

Replaces IS_PO2 by is_power_of_2. It is more accurate to use
is_power_of_2 since it returns 1 for numbers that are powers
of 2 only whereas IS_PO2 returns 1 for 0 and numbers that are
powers of 2.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: workitem.c: replace IS_PO2 by is_power_of_2

Replaces IS_PO2 by is_power_of_2. It is more accurate to use
is_power_of_2 since it returns 1 for numbers that are powers
of 2 only whereas IS_PO2 returns 1 for 0 and numbers that are
powers of 2.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm_extent.c: replace IS_PO2 by is_power_of_2

Replaces IS_PO2 by is_power_of_2. It is more accurate to use
is_power_of_2 since it returns 1 for numbers that are powers
of 2 only whereas IS_PO2 returns 1 for 0 and numbers that are
powers of 2.

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: hfi1 : Prefer using the BIT macro

This patch replaces bit shifting on 1 with the BIT(x) macro

Signed-off-by: Sunny Kumar <sunnyk@cdac.in>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: amso1100: c2: Remove wrapper function

This patch removes the c2_print_macaddr() wrapper function which calls
the pr_debug standard kernel function only.

c2_print_macaddr() has been replaced by directly calling pr_debug().

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: optionally prescan rx queue for {B, F}ECNs - UC, RC

To more rapidly respond to Explicit Congestion Notifications, prescan the
receive queue, and process FECNs, and BECNs first.  When a UC, or RC packet
containing a FECN, or BECN is found, immediately react to the ECN (either by
returning a CNP, or adjusting the injection rate). Afterward, the packet will
be processed normally.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: don't cache "prescan head"

When HFI1_CAP_DMA_RTAIL is toggled off the "prescan head" can get out of sync
with the receive context's "head". This happens when, after prescan_rxq() newly
arrived packets are then received, and processed by an RX interrupt handler.
This is an unavoidable race, and to avoid getting out of sync we always start
prescanning at the current "rcd->head" entry.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Move macros to a common header

In preparation of implementing TID caching move EXP_TID macros to a common
header user_exp_rcv.h

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove unnecessary include files

These includes were not used in file_ops.c

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Clean up macro indentation

In preparation for implementing Expected TID caching we do some simple clean up
of header file macros.

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove file pointer macros

Remove the following macros in favor of explicit use of struct hfi1_filedata and
various sub structures.

ctxt_fp
subctxt_fp
tidcursor_fp
user_sdma_pkt_fp
user_sdma_comp_fp

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove rates variable in host_int_add_station

Instead of using rates variable, it is used as add_sta_info->rates
directly.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use kmemdup in host_int_add_station

This patch replaces kmalloc followed by memcpy with kmemdup.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrAddStationMsg in host_int_add_station

This patch renames pstrAddStationMsg to add_sta_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrStaParams in host_int_add_station

This patch renames pstrStaParams to sta_param to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of host_int_add_station

This patch changes struct host_if_drv of host_int_add_station function
declaration from hWFIDrv to hif_drv.
With this change, first parameter of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_add_station

This patch changes return type of host_int_add_station from s32 to int.
The result variable gets return value from wilc_mq_send that has return
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrDelStationMsg in host_int_del_station

This patch renames pstrDelStationMsg to del_sta_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8MacAddr in host_int_del_station

This patch changes pu8MacAddr to mac_addr that is second argument of
this function to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of host_int_del_station

This patch changes struct host_if_drv of host_int_del_station function
declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_del_station

This patch changes return type of host_int_del_station from s32 to int.
The result variable gets return value from wilc_mq_send that has return
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix parameter name of host_int_del_beacon

This patch changes struct host_if_drv of host_int_del_beacon function
declaration from hWFIDrv to hif_drv.
With this change, first parameter name of this function declaration and
definition has same name as hif_drv.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_del_beacon

This patch changes return type of host_int_del_beacon from s32 to int.
The result variable gets return value from wilc_mq_send that has return
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove os_private

This patch removes unused variable os_private and delete
struct wilc_wlan_os_context_t since there is no members in it. Remove it's
related code also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change parameter type of hif_init

This patch changes parameter type wilc_wlan_inp_t with struct wilc and
modify it's related code. Pass wilc to the functions as well.
wilc will be used in later patch.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove os_context

This patch removes variable os_context of wilc_sdio_t and wilc_spi_t because
os_context is not used, and delete it's related code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_spi_init: remove parameter vp

This patch removes function parameter vp which is not used and modify it's
related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_sdio_init: remove parameter pv

This patch removes function parameter pv which is not used and modify it's
related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused function pointer io_deinit

This patch removes function pointer io_deinit which is never used, and delete
it's related codes also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer io_init

This patch removes function pointer io_init of wilc_wlan_io_func_t and it's
related codes, and call the function linux_spi_init directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove spi_max_speed of wilc_wlan_io_func_t

This patch removes spi_max_speed of wilc_wlan_io_func_t which is not used
anymore and removes union u and struct spi, which does not have members in it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_max_speed

This patch removes function pointer spi_max_speed of wilc_spi_t and just call
the function linux_spi_set_max_speed directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove spi_trx of wilc_wlan_io_func_t

This patch removes spi_trx of wilc_wlan_io_func_t which is not used anymore.
Delete it's related codes also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_trx

This patch removes function pointer spi_trx and call linux_spi_write_read
directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_rx of wilc_wlan_io_func_t

This patch removes spi_rx of wilc_wlan_io_func_t and it's related codes since
it is not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_rx of wilc_spi_t

This patch removes function pointer spi_rx of wilc_spi_t and just call
linux_spi_read instead.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_tx of wilc_wlan_io_function_t

This patch removes function pointer spi_tx of wilc_wlan_io_func_t because
it is not used anymore.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer spi_tx of wilc_spi_t

This patch removes function pointer spi_tx of wilc_spi_t and call
linux_spi_write directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_spi.c: add prefix wilc in all function name

This patch add prefix wilc for all functions name because the function name
such as spi_write, spi_read and spi_sync are same as linux spi function.
Hence, this should be done before restructuring wilc_spi.c and
linux_wlan_spi.c later.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: call linux_sdio_init instead of io_init

Just call linux_sdio_init instead of io_init function pointer.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove varialbe sdio_set_default_speed

This patch removes sdio_set_default_speed of wilc_wlan_io_func_t which is
not used anymore and also remove struct sdio since it is empty.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer sdio_set_default_speed

This patch removes function pointer sdio_set_default_speed of wilc_sdio_t
and call linux_sdio_set_default_speed() directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove sdio_set_max_speed

This patch removes sdio_set_max_speed of wilc_wlan_io_func_t which is not
used any more.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer sdio_set_max_speed

This patch removes function pointer sdio_set_max_speed of wilc_sdio_t and
call the function directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove sdio_cmd53 of wilc_wlan_io_func_t

This patch removes sdio_cmd53 of wilc_wlan_io_func_t which is not used.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer sdio_cmd53

This patch removes function pointer sdio_cmd53 of wilc_sdio_t and just call
the function directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove sdio_cmd52 of wilc_wlan_io_func_t

This patch removes sdio_cmd52 of wilc_wlan_io_func_t which is not used.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove function pointer sdio_cmd52

This patch removes function pointer sdio_cmd52 of wilc_sdio_t and just call
the function directly.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: separate hif_sdio and hif_spi into different module

hif_sdio and hif_spi objects are compiled all the time even though one of SPI
or SDIO is selected. This patch separates hif_sdio and hif_spi into different
modules using ifdef define.
After rework SPI and SDIO modules with only one hif interface, the define
WILC_SDIO will be removed. This is first path of this series.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8WidCnt of handle_cfg_param function

This patch renames u8WidCnt variable of handle_cfg_param function to wid_cnt
to avoid camelcase.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strWIDList of handle_cfg_param function

This patch renames strWIDList variable of handle_cfg_param function to wid_list
to avoid camelcase.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>