]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/log
mirror_ubuntu-eoan-kernel.git
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 26 Jan 2008 01:15:23 +0000 (17:15 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Sat, 26 Jan 2008 01:11:13 +0000 (17:11 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits)
  ocfs2: clean up bh null checks
  ocfs2: document access rules for blocked_lock_list
  configfs: file.c fix possible recursive locking
  configfs: dir.c fix possible recursive locking
  configfs: Remove EXPERIMENTAL
  ocfs2: bump version number
  ocfs2/dlm: Clear joining_node on hearbeat node down
  ocfs2: convert byte order of constant instead of variable
  ocfs2: Update default cluster timeouts
  ocfs2: printf fixes
  ocfs2: Use generic_file_llseek
  ocfs2: Safer read_inline_data()
  ocfs2: Silence false lockdep warnings
  [PATCH 2/2] ocfs2: cluster aware flock()
  [PATCH 1/2] ocfs2: add flock lock type
  ocfs2: Local alloc window size changeable via mount option
  ocfs2: Support commit= mount option
  ocfs2: Add missing permission checks
  [PATCH 2/2] ocfs2: Implement group add for online resize
  [PATCH 1/2] ocfs2: Add group extend for online resize
  ...

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sat, 26 Jan 2008 01:08:28 +0000 (17:08 -0800)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits)
  fix drivers/ata/sata_fsl.c double-decl
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: Merge winbond support
  ata_generic: Cenatek support
  pata_winbond: error return
  pata_serverworks: Fix cable types and cosmetics
  pata_mpc52xx: remove un-needed assignment
  libata: fix off-by-one in error categorization
  ahci: factor out AHCI enabling and enable AHCI before reading CAP
  ata_piix: implement SIDPR SCR access
  ata_piix: convert to prepare - activate initialization
  libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
  [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
  pata_legacy: resychronize with upstream changes and resubmit
  [libata] pata_legacy: typo fix
  [libata] pata_winbond: update for new ->data_xfer hook
  pata_pcmcia: convert to new data_xfer prototype
  libata annotations and fixes
  libata: use dev_driver_string() instead of "libata" in libata-sff.c
  ata_piix: kill unused constants and flags
  ...

16 years agoocfs2: clean up bh null checks
Mark Fasheh [Thu, 24 Jan 2008 02:35:31 +0000 (18:35 -0800)]
ocfs2: clean up bh null checks

If we know a buffer_head is non-null, then brelse() is unnecessary and
put_bh() can be used instead. Also, an explicit check for NULL is
unnecessary when using brelse(). This patch only covers buffer_head_io.c and
resize.c, which have recently added code which exhibits this problem.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: document access rules for blocked_lock_list
Mark Fasheh [Thu, 24 Jan 2008 00:54:48 +0000 (16:54 -0800)]
ocfs2: document access rules for blocked_lock_list

ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some
usage restrictions which aren't immediately obvious to anyone reading the
code. It's a good idea to document this so that we avoid making costly
mistakes in the future.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: file.c fix possible recursive locking
Joonwoo Park [Wed, 26 Dec 2007 03:09:57 +0000 (12:09 +0900)]
configfs: file.c fix possible recursive locking

configfs_register_subsystem() with default_groups triggers recursive locking.
it seems that mutex_lock_nested is needed.

=============================================
[ INFO: possible recursive locking detected ]
2.6.24-rc6 #145
---------------------------------------------
swapper/1 is trying to acquire lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40c9a9e>] configfs_add_file+0x2e/0x70

but task is already holding lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca985>] configfs_register_subsystem+0x55/0x130

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #145
 [<c40053ba>] show_trace_log_lvl+0x1a/0x30
 [<c4005e82>] show_trace+0x12/0x20
 [<c400687e>] dump_stack+0x6e/0x80
 [<c404ec72>] __lock_acquire+0xe62/0x1120
 [<c404efb2>] lock_acquire+0x82/0xa0
 [<c43fda88>] mutex_lock_nested+0x98/0x2e0
 [<c40c9a9e>] configfs_add_file+0x2e/0x70
 [<c40c9b0c>] configfs_create_file+0x2c/0x40
 [<c40ca639>] configfs_attach_item+0x139/0x220
 [<c40ca734>] configfs_attach_group+0x14/0x140
 [<c40ca7e9>] configfs_attach_group+0xc9/0x140
 [<c40ca9f6>] configfs_register_subsystem+0xc6/0x130
 [<c45c8186>] init_netconsole+0x2b6/0x300
 [<c45a75f2>] kernel_init+0x142/0x320
 [<c4004fb3>] kernel_thread_helper+0x7/0x14
 =======================

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: dir.c fix possible recursive locking
Joonwoo Park [Wed, 26 Dec 2007 03:09:57 +0000 (12:09 +0900)]
configfs: dir.c fix possible recursive locking

configfs_register_subsystem() with default_groups triggers recursive locking.
it seems that mutex_lock_nested is needed.

=============================================
[ INFO: possible recursive locking detected ]
2.6.24-rc6 #141
---------------------------------------------
swapper/1 is trying to acquire lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca76f>] configfs_attach_group+0x4f/0x190

but task is already holding lock:
 (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130

other info that might help us debug this:
1 lock held by swapper/1:
 #0:  (&sb->s_type->i_mutex_key#3){--..}, at: [<c40ca9d5>] configfs_register_subsystem+0x55/0x130

stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #141
 [<c40053ba>] show_trace_log_lvl+0x1a/0x30
 [<c4005e82>] show_trace+0x12/0x20
 [<c400687e>] dump_stack+0x6e/0x80
 [<c404ec72>] __lock_acquire+0xe62/0x1120
 [<c404efb2>] lock_acquire+0x82/0xa0
 [<c43fdad8>] mutex_lock_nested+0x98/0x2e0
 [<c40ca76f>] configfs_attach_group+0x4f/0x190
 [<c40caa46>] configfs_register_subsystem+0xc6/0x130
 [<c45c8186>] init_netconsole+0x2b6/0x300
 [<c45a75f2>] kernel_init+0x142/0x320
 [<c4004fb3>] kernel_thread_helper+0x7/0x14
 =======================

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoconfigfs: Remove EXPERIMENTAL
Joel Becker [Mon, 31 Dec 2007 21:56:47 +0000 (13:56 -0800)]
configfs: Remove EXPERIMENTAL

configfs has been alive and kicking for a while now.  It underpins some
non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: bump version number
Mark Fasheh [Tue, 6 Nov 2007 23:52:58 +0000 (15:52 -0800)]
ocfs2: bump version number

Bump the printed version to 1.5.0. This helps us quickly identify which
version of Ocfs2 a bug filer is running.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2/dlm: Clear joining_node on hearbeat node down
Tao Ma [Thu, 10 Jan 2008 07:20:55 +0000 (15:20 +0800)]
ocfs2/dlm: Clear joining_node on hearbeat node down

Currently the process of dlm join contains 2 steps: query join and assert join.
After query join, the joined node will set its joining_node. So if the joining
node happens to panic before the 2nd step, the joined node will fail to clear
its joining_node flag because that node isn't in the domain map. It at least
cause 2 problems.
1. All the new join request will fail. So no new node can mount the volume.
2. The joined node can't umount the volume since during the umount process it
   has to wait for the joining_node to be unknown. So the umount will be hanged.

The solution is to clear the joining_node before we check the domain map.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: convert byte order of constant instead of variable
Marcin Slusarz [Tue, 25 Dec 2007 14:52:59 +0000 (15:52 +0100)]
ocfs2: convert byte order of constant instead of variable

Convert byte order of constant instead of variable it will be done at
compile time vs run time. Remove unused le32_and_cpu.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Update default cluster timeouts
Sunil Mushran [Wed, 7 Nov 2007 00:10:23 +0000 (16:10 -0800)]
ocfs2: Update default cluster timeouts

Lots of people are having trouble with the default timeouts, which are too
low. These new values are derived from an informal survey taken on
ocfs2-users, as well as data from bug reports. This should reduce the amount
of cluster disconnects and subsequent fencing seen during normal workloads.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: printf fixes
Jan Kara [Wed, 19 Dec 2007 14:25:42 +0000 (15:25 +0100)]
ocfs2: printf fixes

Explicitely convert loff_t to long long in printf. Just for sure...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Use generic_file_llseek
Jan Kara [Wed, 19 Dec 2007 14:24:52 +0000 (15:24 +0100)]
ocfs2: Use generic_file_llseek

We should use generic_file_llseek() and not default_llseek() so that
s_maxbytes gets properly checked when seeking.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Safer read_inline_data()
Jan Kara [Wed, 19 Dec 2007 14:24:09 +0000 (15:24 +0100)]
ocfs2: Safer read_inline_data()

In ocfs2_read_inline_data() we should store file size in loff_t. Although
the file size should fit in 32 bits we cannot be sure in case filesystem is
corrupted.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Silence false lockdep warnings
Jan Kara [Thu, 10 Jan 2008 23:11:45 +0000 (00:11 +0100)]
ocfs2: Silence false lockdep warnings

Create separate lockdep lock classes for system file's i_mutexes. They are
used to guard allocations and similar things and thus rank differently
than i_mutex of a regular file or directory.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 2/2] ocfs2: cluster aware flock()
Mark Fasheh [Fri, 21 Dec 2007 00:49:04 +0000 (16:49 -0800)]
[PATCH 2/2] ocfs2: cluster aware flock()

Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new
mount option, "localflocks" is added so that users can revert to old
functionality as need be.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 1/2] ocfs2: add flock lock type
Mark Fasheh [Fri, 21 Dec 2007 00:43:10 +0000 (16:43 -0800)]
[PATCH 1/2] ocfs2: add flock lock type

This adds a new dlmglue lock type which is intended to back flock()
requests.

Since these locks are driven from userspace, usage rules are much more
liberal than the typical Ocfs2 internal cluster lock. As a result, we can't
make use of most dlmglue features - lock caching and lock level
optimizations in particular. Additionally, userspace is free to deadlock
itself, so we have to deal with that in the same way as the rest of the
kernel - by allowing a signal to abort a lock request.

In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock()
does it's own dlm coordination. We still use the same helper functions
though, so duplicated code is kept to a minimum.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Local alloc window size changeable via mount option
Sunil Mushran [Thu, 20 Dec 2007 22:58:11 +0000 (14:58 -0800)]
ocfs2: Local alloc window size changeable via mount option

Local alloc is a performance optimization in ocfs2 in which a node
takes a window of bits from the global bitmap and then uses that for
all small local allocations. This window size is fixed to 8MB currently.
This patch allows users to specify the window size in MB including
disabling it by passing in 0. If the number specified is too large,
the fs will use the default value of 8MB.

mount -o localalloc=X /dev/sdX /mntpoint

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Support commit= mount option
Mark Fasheh [Wed, 7 Nov 2007 22:40:36 +0000 (14:40 -0800)]
ocfs2: Support commit= mount option

Mostly taken from ext3. This allows the user to set the jbd commit interval,
in seconds. The default of 5 seconds stays the same, but now users can
easily increase the commit interval. Typically, this would be increased in
order to benefit performance at the expense of data-safety.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Add missing permission checks
Mark Fasheh [Wed, 19 Dec 2007 02:58:18 +0000 (18:58 -0800)]
ocfs2: Add missing permission checks

Check that an online resize is being driven by a user with permission to
change system resource limits.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 2/2] ocfs2: Implement group add for online resize
Tao Ma [Tue, 18 Dec 2007 07:47:25 +0000 (15:47 +0800)]
[PATCH 2/2] ocfs2: Implement group add for online resize

This patch adds the ability for a userspace program to request that a
properly formatted cluster group be added to the main allocation bitmap for
an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD.
On a high level, this is similar to ext3, but we use a different ioctl as
the structure which has to be passed through is different.

During an online resize, tunefs.ocfs2 will format any new cluster groups
which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on
each one. Kernel verifies that the core cluster group information is valid
and then does the work of linking it into the global allocation bitmap.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[PATCH 1/2] ocfs2: Add group extend for online resize
Tao Ma [Tue, 18 Dec 2007 07:47:03 +0000 (15:47 +0800)]
[PATCH 1/2] ocfs2: Add group extend for online resize

This patch adds the ability for a userspace program to request an extend of
last cluster group on an Ocfs2 file system. The request is made via ioctl,
OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is
obviously Ocfs2 specific.

tunefs.ocfs2 would call this for an online-resize operation if the last
cluster group isn't full.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Reserve ioctl range
Tao Ma [Tue, 18 Dec 2007 07:46:37 +0000 (15:46 +0800)]
ocfs2: Reserve ioctl range

We need to reserve at least two ioctls for online-resize. Reserve a small
range of ioctls for Ocfs2 use in Documentation/ioctl-number.txt. This should
give us enough room for future growth.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.
Tao Ma [Tue, 18 Dec 2007 07:46:10 +0000 (15:46 +0800)]
ocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum.

This value is initialized from global_bitmap->id2.i_chain.cl_cpg. If there
is only 1 group, it will be equal to the total clusters in the volume. So
as for online resize, it should change for all the nodes in the cluster.
It isn't easy and there is no corresponding lock for it.

bitmap_cpg is only used in 2 areas:
1. Check whether the suballoc is too large for us to allocate from the global
   bitmap, so it is little used. And now the suballoc size is 2048, it rarely
   meet this situation and the check is almost useless.
2. Calculate which group a cluster belongs to. We use it during truncate to
   figure out which cluster group an extent belongs too. But we should be OK
   if we increase it though as the cluster group calculated shouldn't change
   and we only ever have a small bitmap_cpg on file systems with a single
   cluster group.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years ago[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m
Herbert Xu [Fri, 25 Jan 2008 22:48:44 +0000 (09:48 +1100)]
[CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m

Currently it is possible to select HW_RANDOM as a module and have
hifn795x built-in.  This causes a build problem because hifn795x
will then call hwrng_register which isn't built-in.

This patch introduces a new config option to control the hifn795x
RNG which lets us avoid this problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years agoocfs2: Documentation update
Mark Fasheh [Tue, 30 Oct 2007 19:09:03 +0000 (12:09 -0700)]
ocfs2: Documentation update

Remove 'readpages' from the list in ocfs2.txt. Instead of having two
identical lists, I just removed the list in the OCFS2 section of fs/Kconfig
and added a pointer to Documentation/filesystems/ocfs2.txt.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Readpages support
Mark Fasheh [Tue, 30 Oct 2007 19:08:32 +0000 (12:08 -0700)]
ocfs2: Readpages support

Add ->readpages support to Ocfs2. This is rather trivial - all it required
is a small update to ocfs2_get_block (for mapping full extents via b_size)
and an ocfs2_readpages() function which partially mirrors ocfs2_readpage().

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agodlm: Split lock mode and flag constants into a sharable header.
Joel Becker [Fri, 5 Oct 2007 21:31:44 +0000 (14:31 -0700)]
dlm: Split lock mode and flag constants into a sharable header.

This allows others to use the DLM constants without being tied to the
function API of fs/dlm.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Rename ocfs2_meta_[un]lock
Mark Fasheh [Thu, 18 Oct 2007 22:30:42 +0000 (15:30 -0700)]
ocfs2: Rename ocfs2_meta_[un]lock

Call this the "inode_lock" now, since it covers both data and meta data.
This patch makes no functional changes.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Remove data locks
Mark Fasheh [Thu, 18 Oct 2007 22:23:46 +0000 (15:23 -0700)]
ocfs2: Remove data locks

The meta lock now covers both meta data and data, so this just removes the
now-redundant data lock.

Combining locks saves us a round of lock mastery per inode and one less lock
to ping between nodes during read/write.

We don't lose much - since meta locks were always held before a data lock
(and at the same level) ordered writeout mode (the default) ensured that
flushing for the meta data lock also pushed out data anyways.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Add data downconvert worker to inode lock
Mark Fasheh [Thu, 18 Oct 2007 22:13:59 +0000 (15:13 -0700)]
ocfs2: Add data downconvert worker to inode lock

In order to extend inode lock coverage to inode data, we use the same data
downconvert worker with only a small modification to only do work for
regular files.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2: Remove mount/unmount votes
Mark Fasheh [Mon, 24 Sep 2007 22:56:19 +0000 (15:56 -0700)]
ocfs2: Remove mount/unmount votes

The node maps that are set/unset by these votes are no longer relevant, thus
we can remove the mount and umount votes. Since those are the last two
remaining votes, we can also remove the entire vote infrastructure.

The vote thread has been renamed to the downconvert thread, and the small
amount of functionality related to managing it has been moved into
fs/ocfs2/dlmglue.c. All references to votes have been removed or updated.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 25 Jan 2008 22:41:24 +0000 (14:41 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (81 commits)
  RDMA/cxgb3: Fix the T3A workaround checks
  IB/ipath: Remove unnecessary cast
  IPoIB: Constify seq_operations function pointer tables
  RDMA/cxgb3: Mark QP as privileged based on user capabilities
  RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()
  RDMA/cxgb3: Flush the receive queue when closing
  IB/ipath: Trivial simplification of ipath_make_ud_req()
  IB/mthca: Update latest "native Arbel" firmware revision
  IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler
  IB/ipath: Add mappings from HW register to PortInfo port physical state
  IB/ipath: Changes to support PIO bandwidth check on IBA7220
  IB/ipath: Minor cleanup of unused fields and chip-specific errors
  IB/ipath: New sysfs entries to control 7220 features
  IB/ipath: Add new chip-specific functions to older chips, consistent init
  IB/ipath: Remove unused MDIO interface code
  IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware
  IB/ehca: Add "port connection autodetect mode"
  IB/ehca: Define array to store SMI/GSI QPs
  IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()
  IB/iser: Add change_queue_depth method
  ...

16 years agoocfs2: Remove fs dependency on ocfs2_heartbeat module
Mark Fasheh [Mon, 24 Sep 2007 22:09:41 +0000 (15:09 -0700)]
ocfs2: Remove fs dependency on ocfs2_heartbeat module

Now that the dlm exposes domain information to us, we don't need generic
node up / node down callbacks. And since the DLM is only telling us when a
node goes down unexpectedly, we no longer need to optimize away node down
callbacks via the umount map.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoocfs2_dlm: Call node eviction callbacks from heartbeat handler
Mark Fasheh [Fri, 7 Sep 2007 18:11:10 +0000 (11:11 -0700)]
ocfs2_dlm: Call node eviction callbacks from heartbeat handler

With this, a dlm client can take advantage of the group protocol in the dlm
to get full notification whenever a node within the dlm domain leaves
unexpectedly.

Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
16 years agoRDMA/cxgb3: Fix the T3A workaround checks
Steve Wise [Thu, 24 Jan 2008 22:30:16 +0000 (16:30 -0600)]
RDMA/cxgb3: Fix the T3A workaround checks

Correctly work around T3A issues by checking "hwtype != T3A" instead of
"hwtype == T3B".  This will be needed for new hardware types.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Remove unnecessary cast
Jan Engelhardt [Tue, 22 Jan 2008 19:45:30 +0000 (20:45 +0100)]
IB/ipath: Remove unnecessary cast

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB: Constify seq_operations function pointer tables
Jan Engelhardt [Tue, 22 Jan 2008 19:45:30 +0000 (20:45 +0100)]
IPoIB: Constify seq_operations function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Mark QP as privileged based on user capabilities
Steve Wise [Mon, 21 Jan 2008 20:42:13 +0000 (14:42 -0600)]
RDMA/cxgb3: Mark QP as privileged based on user capabilities

This is needed to support zero-stag properly.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Fix page shift calculation in build_phys_page_list()
Steve Wise [Mon, 21 Jan 2008 20:42:11 +0000 (14:42 -0600)]
RDMA/cxgb3: Fix page shift calculation in build_phys_page_list()

The existing logic incorrectly maps this buffer list:

    0: addr 0x10001000, size 0x1000
    1: addr 0x10002000, size 0x1000

To this bogus page list:

    0: 0x10000000
    1: 0x10002000

The shift calculation must also take into account the address of the
first entry masked by the page_mask as well as the last address+size
rounded up to the next page size.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Flush the receive queue when closing
Steve Wise [Mon, 21 Jan 2008 20:42:09 +0000 (14:42 -0600)]
RDMA/cxgb3: Flush the receive queue when closing

- for kernel mode cqs, call event notification handler when flushing.
- flush QP when moving from RTS -> CLOSING.
- fix logic to identify a kernel mode qp.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Trivial simplification of ipath_make_ud_req()
Ralph Campbell [Fri, 25 Jan 2008 22:17:44 +0000 (14:17 -0800)]
IB/ipath: Trivial simplification of ipath_make_ud_req()

Move the increment of s_hdrwords into the existing if block that tests
if we're doing a send with immediate, to save one test of the opcode.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mthca: Update latest "native Arbel" firmware revision
Roland Dreier [Fri, 25 Jan 2008 22:17:44 +0000 (14:17 -0800)]
IB/mthca: Update latest "native Arbel" firmware revision

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB: Remove redundant check of netif_queue_stopped() in xmit handler
Krishna Kumar [Thu, 15 Nov 2007 05:05:37 +0000 (10:35 +0530)]
IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler

qdisc_run() now tests for queue_stopped() before calling
__qdisc_run(), and the same check is done in every iteration of
__qdisc_run(), so another check is not required in the driver xmit.
This means that ipoib_start_xmit() no longer needs to test
netif_queue_stopped(); the test was added to fix earlier kernels,
where the networking stack did not guarantee that the xmit method of
an LLTX driver would not be called after the queue was stopped, but
current kernels do provide this guarantee.

To validate, I put a debug in the TX_BUSY path which never hit with 64
threads running overnight exercising this code a few 100 million
times.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add mappings from HW register to PortInfo port physical state
Ralph Campbell [Thu, 10 Jan 2008 08:50:41 +0000 (00:50 -0800)]
IB/ipath: Add mappings from HW register to PortInfo port physical state

Add new mappings from port physical state (a HW register value) to the
IB SubnGet(PortInfo) port physical state.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Changes to support PIO bandwidth check on IBA7220
Dave Olson [Thu, 9 Aug 2007 10:11:38 +0000 (03:11 -0700)]
IB/ipath: Changes to support PIO bandwidth check on IBA7220

The IBA7220 uses a count-based triggering mechanism, and therefore
can't use the same bandwidth verification mechanism as older chips.

To support the 7220, allow enabling and disabling armlaunch errors on
application request.  Minor robustness improvements as well.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Minor cleanup of unused fields and chip-specific errors
Dave Olson [Tue, 8 Jan 2008 09:51:46 +0000 (01:51 -0800)]
IB/ipath: Minor cleanup of unused fields and chip-specific errors

Clean up some unused header fields, minor related cleanup.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: New sysfs entries to control 7220 features
Michael Albaugh [Tue, 8 Jan 2008 08:37:34 +0000 (00:37 -0800)]
IB/ipath: New sysfs entries to control 7220 features

IBA7220 includes many more configurable IB settings. Getting/setting
these is now grouped into a pair of chip specific functions accessed via
function pointers.  Provide sysfs access to these settings.

Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add new chip-specific functions to older chips, consistent init
Dave Olson [Tue, 8 Jan 2008 10:36:46 +0000 (02:36 -0800)]
IB/ipath: Add new chip-specific functions to older chips, consistent init

This adds the new (sometimes empty) chip-specific functions to the older
chips, and makes the initialization and related functions consistent across
all 3 chips.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Remove unused MDIO interface code
Dave Olson [Wed, 9 Jan 2008 07:16:17 +0000 (23:16 -0800)]
IB/ipath: Remove unused MDIO interface code

This code has been unused for some time, but still had leftovers
from when it was used.

Signed-off-by: Dave Olson <dave.olson@qlogic.com
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware
Joachim Fenkes [Thu, 17 Jan 2008 14:07:24 +0000 (15:07 +0100)]
IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware

Some HW revisions of eHCA2 may cause an RC connection to break if they
received RDMA Reads over that connection before.  This can be
prevented by assuring that, after the first RDMA Read, the QP receives
a new RDMA Read every few million link packets.

Include code into the driver that inserts an empty (size 0) RDMA Read
into the message stream every now and then if the consumer doesn't
post them frequently enough.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Add "port connection autodetect mode"
Hoang-Nam Nguyen [Thu, 17 Jan 2008 14:05:45 +0000 (15:05 +0100)]
IB/ehca: Add "port connection autodetect mode"

This patch enhances ehca with a capability to "autodetect" the ports
being connected physically. In order to utilize that function the
module option nr_ports must be set to -1 (default is 2 - two
ports). This feature is experimental and will made the default later.

More detail:

If the user connects only one port to the switch, current code requires
  1) port one to be connected and
  2) module option nr_ports=1 to be given.

If autodetect is enabled, ehca will not wait at creation of the GSI QP
for the respective port to become active. Since firmware does not
accept modify_qp() while the port is down at initialization, we need
to cache all calls to modify_qp() for the SMI/GSI QP and just return a
good return code.

When a port is activated and we get a PORT_ACTIVE event, we replay the
cached modify-qp() parms and re-trigger any posted recv WRs. Only then
do we forward the PORT_ACTIVE event to registered clients.

The result of this autodetect patch is that all ports will be
accessible by the users. Depending on their respective cabling only
those ports that are connected properly will become operable. If a
user tries to modify a regular QP of a non-connected port, modify_qp()
will fail. Furthermore, ibv_devinfo should show the port state
accordingly.

Note that this patch primarily improves the loading behaviour of
ehca. If the cable is removed while the driver is operating and
plugged in again, firmware will handle that properly by sending an
appropriate async event.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Define array to store SMI/GSI QPs
Hoang-Nam Nguyen [Thu, 17 Jan 2008 14:04:32 +0000 (15:04 +0100)]
IB/ehca: Define array to store SMI/GSI QPs

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()
Hoang-Nam Nguyen [Thu, 17 Jan 2008 14:03:55 +0000 (15:03 +0100)]
IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp()

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/iser: Add change_queue_depth method
Erez Zilber [Thu, 17 Jan 2008 09:53:17 +0000 (11:53 +0200)]
IB/iser: Add change_queue_depth method

Add a .change_queue_depth handler to the scsi_host_template in the
iSER driver.  iscsi_change_queue_depth was added to iscsi_tcp in order
to solve the problem of queue depth which was too high for some
targets.  It is also applicable for iSER.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/iser: Print information about unhandled RDMA CM events
Erez Zilber [Thu, 17 Jan 2008 09:51:58 +0000 (11:51 +0200)]
IB/iser: Print information about unhandled RDMA CM events

Some RDMA CM events are not supported or not handled in iSER.
This patch adds some info (printk) for the user about them.

Signed-off-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs
Olaf Kirch [Wed, 16 Jan 2008 17:37:16 +0000 (18:37 +0100)]
IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs

When a FMR is released via ib_fmr_pool_unmap(), the FMR usually ends
up on the free_list rather than the dirty_list (because we allow a
certain number of remappings before actually requiring a flush).

However, ib_fmr_batch_release() only looks at dirty_list when flushing
out old mappings.  This means that when ib_fmr_pool_flush() is used to
force a flush of the FMR pool, some dirty FMRs that have not reached
their maximum remap count will not actually be flushed.

Fix this by flushing all FMRs that have been used at least once in
ib_fmr_batch_release().

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/fmr_pool: Flush serial numbers can get out of sync
Olaf Kirch [Wed, 16 Jan 2008 17:36:27 +0000 (18:36 +0100)]
IB/fmr_pool: Flush serial numbers can get out of sync

Normally, the serial numbers for flush requests and flushes executed
for an FMR pool should be in sync.

However, if the FMR pool flushes dirty FMRs because the
dirty_watermark was reached, we wake up the cleanup thread and let it
do its stuff.  As a side effect, the cleanup thread increments
pool->flush_ser, which leaves it one higher than pool->req_ser.  The
next time the user calls ib_flush_fmr_pool(), the cleanup thread will
be woken up, but ib_flush_fmr_pool() won't wait for the flush to
complete because flush_ser is already past req_ser.  This means the
FMRs that the user expects to be flushed may not have all been flushed
when the function returns.

Fix this by telling the cleanup thread to do work exclusively by
incrementing req_ser, and by moving the comparison of dirty_len and
dirty_watermark into ib_fmr_pool_unmap().

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
16 years agoIB/umad: Simplify and fix locking
Roland Dreier [Fri, 25 Jan 2008 22:15:42 +0000 (14:15 -0800)]
IB/umad: Simplify and fix locking

In addition to being overly complex, the locking in user_mad.c is
broken: there were multiple reports of deadlocks and lockdep warnings.
In particular it seems that a single thread may end up trying to take
the same rwsem for reading more than once, which is explicitly
forbidden in the comments in <linux/rwsem.h>.

To solve this, we change the locking to use plain mutexes instead of
rwsems.  There is one mutex per open file, which protects the contents
of the struct ib_umad_file, including the array of agents and list of
queued packets; and there is one mutex per struct ib_umad_port, which
protects the contents, including the list of open files.  We never
hold the file mutex across calls to functions like ib_unregister_mad_agent(),
which can call back into other ib_umad code to queue a packet, and we
always hold the port mutex as long as we need to make sure that a
device is not hot-unplugged from under us.

This even makes things nicer for users of the -rt patch, since we
remove calls to downgrade_write() (which is not implemented in -rt).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Fix some sparse warnings about shadowed symbols
Roland Dreier [Fri, 25 Jan 2008 22:15:42 +0000 (14:15 -0800)]
IB/ipath: Fix some sparse warnings about shadowed symbols

There are a few places in the ipath driver where a variable is
re-declared within a block where it is already in scope.  Most of these
extra declarations can simply be removed, since the variable from the
outer scope is used in a way so that it does not need to keep its
variable across the block with the re-declaration.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cxgb3: Endianness annotation for irs field
Roland Dreier [Fri, 25 Jan 2008 22:15:42 +0000 (14:15 -0800)]
RDMA/cxgb3: Endianness annotation for irs field

t3_rdma_init_wr.irs is a big-endian field, so declare it as __be32.
This fixes one sparse warning.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Use round_jiffies() for EQ polling timer
Anton Blanchard [Mon, 15 Oct 2007 05:49:07 +0000 (00:49 -0500)]
IB/ehca: Use round_jiffies() for EQ polling timer

Use round_jiffies() to align ehca's 1-second timer with other timers
and potentially save power by sleeping cores for longer.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cma: Override default responder_resources with user value
Sean Hefty [Fri, 4 Jan 2008 18:47:12 +0000 (10:47 -0800)]
RDMA/cma: Override default responder_resources with user value

By default, the responder_resources parameter is set to that received
in a connection request.  The passive side may override this value
when accepting the connection.  Use the value provided by the passive
side when transitioning the QP to RTR state, rather than the value
given in the connect request.  Without this change, the RTR transition
may fail if the passive side supports fewer responder_resources than
that in the request.

For code consistency and to protect against QP destruction, restructure
overriding initiator_depth to match how responder_resources is set.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Drop support for the original QHT7040 board
Dave Olson [Mon, 7 Jan 2008 05:12:38 +0000 (21:12 -0800)]
IB/ipath: Drop support for the original QHT7040 board

The original QHT7040 had significant performance issues so there was an
additional check in the driver for a newer serial number.  Support for
the small quantities of that board shipped has been dropped, so this
patch removes the special checks to simplify the code.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add ipath_read_ireg() abstraction
Arthur Jones [Mon, 7 Jan 2008 05:12:38 +0000 (21:12 -0800)]
IB/ipath: Add ipath_read_ireg() abstraction

Different chips have different width interrupt status registers, so add
a flag and accessor function to decide which width register read to use.

Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add flag and handling for chips with swapped register bug
Ralph Campbell [Mon, 7 Jan 2008 05:12:38 +0000 (21:12 -0800)]
IB/ipath: Add flag and handling for chips with swapped register bug

The 6110 had a bug that caused some registers to be swapped; it was
fixed for the 7220 (and didn't affect the 6120 because it had fewer
registers).  This adds a flag and related code to handle that, and
includes some minor cleanups in the same area.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
16 years agoIB/ipath: Port config has on-chip effects for 7220
Ralph Campbell [Mon, 7 Jan 2008 05:02:34 +0000 (21:02 -0800)]
IB/ipath: Port config has on-chip effects for 7220

The number of configured ports for the 7220 changes the number of eager
TIDs available per port, for all but port 0 (kernel port) which remains
constant, so add a field to give port0 count separate from the portdata
structure.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Allow more flexible user register alignments
Ralph Campbell [Mon, 7 Jan 2008 05:02:34 +0000 (21:02 -0800)]
IB/ipath: Allow more flexible user register alignments

User registers have different alignments on different chips (4KB on
older, 64KB on 7220).  Allow mapping the user registers on kernels with
page sizes up to 64K.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Clean up some comments
Dave Olson [Mon, 7 Jan 2008 05:02:34 +0000 (21:02 -0800)]
IB/ipath: Clean up some comments

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Export hardware counters more consistently
Ralph Campbell [Mon, 7 Jan 2008 05:02:34 +0000 (21:02 -0800)]
IB/ipath: Export hardware counters more consistently

Various hardware counters are exported via the ipath file system (since
it is binary data).  The old file format was very dependent on the HW
offsets for these registers.  Newer HCA chips can have different
counters at different offsets.  This patch adds a level of indirection
to make the file format consistent across HCAs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: MAD performance sampling registers support
Ralph Campbell [Mon, 7 Jan 2008 05:02:33 +0000 (21:02 -0800)]
IB/ipath: MAD performance sampling registers support

Add support for QLogic HCAs which have hardware performance sampling
registers for PortSamplesControl and PortSamplesResult MADs.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/srp: Add identifying information to log messages
David Dillow [Mon, 7 Jan 2008 23:23:41 +0000 (18:23 -0500)]
IB/srp: Add identifying information to log messages

When you have multiple targets, it gets really confusing when you try
to track down who did a reset when there is no identifying information
in the log message, especially when the same extension ID is mapped
through two different local IB ports.  So, add an identifier that can
be used to track back to which local IB port/remote target pair is the
one having problems.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Acked-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB/CM: Enable SRQ support on HCAs that support fewer than 16 SG entries
Pradeep Satyanarayana [Fri, 21 Dec 2007 21:08:23 +0000 (13:08 -0800)]
IPoIB/CM: Enable SRQ support on HCAs that support fewer than 16 SG entries

Some HCAs (such as ehca2) support SRQ, but only support fewer than 16 SG
entries for SRQs.  Currently IPoIB/CM implicitly assumes all HCAs will
support 16 SG entries for SRQs (to handle a 64K MTU with 4K pages). This
patch removes that restriction by limiting the maximum MTU in connected
mode to what the maximum number of SRQ SG entries allows.

This patch addresses <https://bugs.openfabrics.org/show_bug.cgi?id=728>

Signed-off-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/srp: Enable SG list chaining
David Dillow [Wed, 19 Dec 2007 22:09:15 +0000 (17:09 -0500)]
IB/srp: Enable SG list chaining

By default, the SCSI mid-layer seems to send down 512KB requests
(sg_tablesize = 256), with some requests occasionally combined. By
allowing the mid-layer to chain requests, we can easily grow to 1024KB
or larger -- I've tested 4096KB I/O requests with no problems.

I looked through the DMA paths on the hardware drivers to ensure they
could take advantage of the SG chaining, and it seems that every one
except ipath uses the system's DMA routines, which have been converted
to handle chaining.  ipath looks like it should be OK, but I have no
way to test it.

Signed-off-by: David Dillow <dillowda@ornl.gov>
[ Tested on ipath.  - Roland ]

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/srp: Respect target credit limit
David Dillow [Wed, 19 Dec 2007 22:08:43 +0000 (17:08 -0500)]
IB/srp: Respect target credit limit

The current SRP initiator will send requests even if it has no credits
available.  The results of sending extra requests are vendor specific,
but on some devices, overrunning credits will cost 85% of peak
performance -- e.g. 100 MB/s vs 720 MB/s.  Other devices may just drop
the requests.

This patch will tell the SCSI midlayer to queue requests if there are
fewer than two credits remaining, and will not issue a task management
request if there are no credits remaining.  The mid-layer will retry
the queued command once an outstanding command completes.

The patch also removes the unlikely() in __srp_get_tx_iu(), as it is
not at all unlikely to hit this limit under heavy load.

Signed-off-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIPoIB: improve IPv4/IPv6 to IB mcast mapping functions
Rolf Manderscheid [Mon, 10 Dec 2007 20:38:41 +0000 (13:38 -0700)]
IPoIB: improve IPv4/IPv6 to IB mcast mapping functions

An IPoIB subnet on an IB fabric that spans multiple IB subnets can't
use link-local scope in multicast GIDs.  The existing routines that
map IP/IPv6 multicast addresses into IB link-level addresses hard-code
the scope to link-local, and they also leave the partition key field
uninitialised.  This patch adds a parameter (the link-level broadcast
address) to the mapping routines, allowing them to initialise both the
scope and the P_Key appropriately, and fixes up the call sites.

The next step will be to add a way to configure the scope for an IPoIB
interface.

Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Changes for fields moving from devdata to portdata
Dave Olson [Thu, 6 Dec 2007 08:28:02 +0000 (00:28 -0800)]
IB/ipath: Changes for fields moving from devdata to portdata

This patch moves some arrays that were defined per-device to be
variables defined in the per context data structure, thus avoiding extra
kzalloc() calls.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Generalize some xxx_SHIFT macros
Dave Olson [Fri, 21 Dec 2007 09:50:59 +0000 (01:50 -0800)]
IB/ipath: Generalize some xxx_SHIFT macros

In preparation for upcoming chips that have different values for
INFINIPATH_R_PORTENABLE_SHIFT, INFINIPATH_R_INTRAVAIL_SHIFT,
INFINIPATH_R_TAILUPD_SHIFT, and portcfg_shift, remove the shared
#defines and use device-specific variables instead.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: kreceive uses portdata rather than devdata
Ralph Campbell [Thu, 20 Dec 2007 10:43:23 +0000 (02:43 -0800)]
IB/ipath: kreceive uses portdata rather than devdata

kreceive is now portdata * instead of devdata * and other kreceive
related cleanups....

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Cleanup ipath_get_egrbuf()
Ralph Campbell [Sat, 22 Dec 2007 00:47:04 +0000 (16:47 -0800)]
IB/ipath: Cleanup ipath_get_egrbuf()

Remove an unused parameter and fix up the comment.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Fix RNR NAK handling
Ralph Campbell [Sat, 15 Dec 2007 03:22:34 +0000 (19:22 -0800)]
IB/ipath: Fix RNR NAK handling

This patch fixes a couple of minor problems with RNR NAK handling:
 - The insertion sort was causing extra delay when inserting ahead
   vs. behind an existing entry on the list.
 - A resend of a first packet of a message which is still not ready,
   needs another RNR NAK (i.e., it was suppressed when it shouldn't).
 - Also, the resend tasklet doesn't need to be woken up unless the
   ACK/NAK actually indicates progress has been made.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ehca: Forward event client-reregister-required to registered clients
Hoang-Nam Nguyen [Thu, 20 Dec 2007 14:06:33 +0000 (15:06 +0100)]
IB/ehca: Forward event client-reregister-required to registered clients

This patch allows ehca to forward event client-reregister-required to
registered clients.  One such event is generated by a switch eg. after
its reboot.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mlx4: Micro-optimize mlx4_ib_poll_one()
Roland Dreier [Fri, 25 Jan 2008 22:15:34 +0000 (14:15 -0800)]
IB/mlx4: Micro-optimize mlx4_ib_poll_one()

Rather than byte-swapping cqe->g_mlpath_rqpn each time we extract a
field from it, byte-swap it once into a temporary variable.  This
results in smaller, better code -- eg, on 32-bit x86:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-5 (-5)
function                                     old     new   delta
mlx4_ib_poll_cq                             1188    1183      -5

Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mthca: Remove MSI support as scheduled
Adrian Bunk [Tue, 1 Jan 2008 13:47:10 +0000 (15:47 +0200)]
IB/mthca: Remove MSI support as scheduled

Remove MSI support from the mthca driver, as scheduled.  There is no
reason to use MSI instead of MSI-X, since MSI-X performs better.  No
one has spoken up since MSI support was deprecated in commit f6be6fbe
("IB/mthca: Schedule MSI support for removal"), so apparently the MSI
support is unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/iser: Typo fix (s/destory/destroy/)
Oliver Pinter [Fri, 25 Jan 2008 22:15:32 +0000 (14:15 -0800)]
IB/iser: Typo fix (s/destory/destroy/)

Signed-off-by: Oliver Pinter <oliver.pntr@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/iser: update URLs of iSER docs
Erez Zilber [Fri, 25 Jan 2008 22:15:32 +0000 (14:15 -0800)]
IB/iser: update URLs of iSER docs

Signed-off-by: Erez Zilber <erezz@voltaire.com>
16 years agoRDMA/cma: add support for rdma_migrate_id()
Sean Hefty [Wed, 14 Nov 2007 08:29:50 +0000 (00:29 -0800)]
RDMA/cma: add support for rdma_migrate_id()

This is based on user feedback from Doug Ledford at RedHat:

Events that occur on an rdma_cm_id are reported to userspace through an
event channel.  Connection request events are reported on the event
channel associated with the listen.  When the connection is accepted, a
new rdma_cm_id is created and automatically uses the listen event
channel.  This is suboptimal where the user only wants listen events on
that channel.

Additionally, it may be desirable to have events related to connection
establishment use a different event channel than those related to
already established connections.

Allow the user to migrate an rdma_cm_id between event channels. All
pending events associated with the rdma_cm_id are moved to the new event
channel.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoRDMA/cma: Reenable device removal on passive side
Vladimir Sokolovsky [Sat, 8 Dec 2007 04:32:03 +0000 (20:32 -0800)]
RDMA/cma: Reenable device removal on passive side

Enable conn_id remove on the passive side after connection
establishment.  This corrects an issue where the IB driver can't be
unloaded after running applications over RDS.  The 'dev_remove' counter
does not reach 0 for established connections on the passive side.

This problem is limited to device removal, and only occurs on the
passive side if there are established connections.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mad: Fix incorrect access to items on local_list
Sean Hefty [Sat, 1 Dec 2007 01:30:18 +0000 (17:30 -0800)]
IB/mad: Fix incorrect access to items on local_list

In cancel_mads(), MADs are moved from the wait_list and local_list
to a cancel_list for processing.  However, the structures on these two
lists are not the same.  The wait_list references struct
ib_mad_send_wr_private, but local_list references struct
ib_mad_local_private.  Cancel_mads() treats all items moved to the
cancel_list as struct ib_mad_send_wr_private.  This leads to a system
crash when requests are moved from the local_list to the cancel_list.

Fix this by leaving local_list alone.  All requests on the local_list
have completed are just awaiting processing by a queued worker thread.

Bug (crash) reported by Dotan Barak <dotanb@dev.mellanox.co.il>.
Problem with local_list access reported by Robert Reynolds
<rreynolds@opengridcomputing.com>.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/cm: Add basic performance counters
Sean Hefty [Tue, 17 Jul 2007 04:49:35 +0000 (21:49 -0700)]
IB/cm: Add basic performance counters

Add performance/debug counters to track sent/received messages, retries,
and duplicates.  Counters are tracked per CM message type, per port.

The counters are always enabled, so intrusive state tracking is not done.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/mad: Report number of times a mad was retried
Sean Hefty [Tue, 27 Nov 2007 08:11:04 +0000 (00:11 -0800)]
IB/mad: Report number of times a mad was retried

To allow ULPs to tune timeout values and capture retry statistics,
report the number of times that a mad send operation was retried.

For RMPP mads, report the total number of times that the any portion
(send window) of the send operation was retried.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/multicast: Report errors on multicast groups if P_key changes
Sean Hefty [Tue, 23 Oct 2007 04:52:54 +0000 (21:52 -0700)]
IB/multicast: Report errors on multicast groups if P_key changes

P_key changes can invalidate multicast groups.  Report errors on all
multicast groups affected by a pkey change.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB: Spelling fixes in comments
Joe Perches [Mon, 17 Dec 2007 19:30:36 +0000 (11:30 -0800)]
IB: Spelling fixes in comments

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agomlx4_core: Fix max_eqs masking in QUERY_DEV_CAP
Jack Morgenstein [Mon, 10 Dec 2007 03:25:23 +0000 (05:25 +0200)]
mlx4_core: Fix max_eqs masking in QUERY_DEV_CAP

log_max_eqs is a 4-bit field, not a 3-bit field in the response to the
QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7
when reading it.

Found by Yossi Leybovitch of Mellanox.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Convert from .nopage to .fault
Nick Piggin [Thu, 13 Dec 2007 23:58:57 +0000 (15:58 -0800)]
IB/ipath: Convert from .nopage to .fault

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Add the work completion error code to the QP error debug output
Ralph Campbell [Sat, 3 Nov 2007 00:40:36 +0000 (17:40 -0700)]
IB/ipath: Add the work completion error code to the QP error debug output

Add the work completion error code to the QP error debug output.
This makes it easier to determine the cause of the error.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Better comment for rmb() in ipath_intr()
Arthur Jones [Thu, 18 Oct 2007 01:18:29 +0000 (18:18 -0700)]
IB/ipath: Better comment for rmb() in ipath_intr()

An internal code review found the comment here lacking -- update it with
more specifics of how and why the rmb() is there.

Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Fix comments for ipath_create_srq()
Ralph Campbell [Tue, 27 Nov 2007 07:44:15 +0000 (23:44 -0800)]
IB/ipath: Fix comments for ipath_create_srq()

During a code review, someone noticed the comments didn't match the code.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
16 years agoIB/ipath: Fix error returned from ib_resize_cq if new size smaller than # entries
Ralph Campbell [Fri, 9 Nov 2007 03:53:01 +0000 (19:53 -0800)]
IB/ipath: Fix error returned from ib_resize_cq if new size smaller than # entries

The gen2_basic tests check for the errno value when a CQ is resized
smaller than the number of outstanding completions queue on the CQ.
This patch changes ib_ipath to return EINVAL which is what ib_mthca
returns and what gen2_basic expects.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>