Chris Wilson [Wed, 11 Dec 2019 11:04:35 +0000 (11:04 +0000)]
drm/i915: Simplify error escape from cmdparser
We need to flush the destination buffer, even on error, to maintain
consistent cache state. Thereby removing the jump on error past the
clear, and reducing the loop-escape mechanism to a mere break.
Chris Wilson [Tue, 10 Dec 2019 18:01:11 +0000 (18:01 +0000)]
drm/i915/gt: Disable manual rc6 for Braswell/Baytrail
The initial investigated showed that while the PCU on Braswell/Baytrail
controlled RC6 itself. setting the software RC6 request made no
difference. Further testing reveals though that it causes a delay in the
PCU on enabling RC6.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/763 Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/perf/rc6-disable Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Acked-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191210180111.3958558-1-chris@chris-wilson.co.uk
Michal Wajdeczko [Wed, 11 Dec 2019 12:45:47 +0000 (12:45 +0000)]
drm/i915/uc: Drop explicit i915 param in some uc_fw functions
There is no need to pass explicit i915 since we already have
a debug trick to get parent gt from uc_fw, we only need to
make this trick available on non-debug builds.
Ville Syrjälä [Tue, 12 Nov 2019 16:38:12 +0000 (18:38 +0200)]
drm/i915: Pass cpu transcoder to assert_pipe()
In order to eliminate intel_pipe_to_cpu_transcoder() (and its
crtc->config usage) let's pass the cpu transcoder to
assert_pipe() so we don't have to do the pipe->cpu transcoder
lookup on HSW+.
On VLV/CHV this can get called during eDP init, which
happens before crtc->config->cpu_transcoder is even
populated. So currently we're always reading PIPECONF(A)
there even if we're trying to check the state of some
other pipe.
Chris Wilson [Tue, 10 Dec 2019 15:13:32 +0000 (15:13 +0000)]
drm/i915: Copy across scheduler behaviour flags across submit fences
We want the bonded request to have the same scheduler properties as its
master so that it is placed at the same depth in the queue. For example,
consider we have requests A, B and B', where B & B' are a bonded pair to
run in parallel on two engines.
A -> B
\- B'
B will run after A and so may be scheduled on an idle engine and wait on
A using a semaphore. B' sees B being executed and so enters the queue on
the same engine as A. As B' did not inherit the semaphore-chain from B,
it may have higher precedence than A and so preempts execution. However,
B' then sits on a semaphore waiting for B, who is waiting for A, who is
blocked by B.
Ergo B' needs to inherit the scheduler properties from B (i.e. the
semaphore chain) so that it is scheduled with the same priority as B and
will not be executed ahead of Bs dependencies.
Furthermore, to prevent the priorities changing via the expose fence on
B', we need to couple in the dependencies for PI. This requires us to
relax our sanity-checks that dependencies are strictly in order.
v2: Synchronise (B, B') execution on all platforms, regardless of using
a scheduler, any no-op syncs should be elided.
Animesh Manna [Thu, 5 Dec 2019 12:35:13 +0000 (18:05 +0530)]
drm/i915/dsb: Fix in mmio offset calculation of DSB instance
As the current usage is restricted to first DSB instance per pipe, so
existing code could not catch the issue to calculate the mmio offset
of different DSB instance per pipe. Corrected the offset calculation.
Jani Nikula [Tue, 10 Dec 2019 10:50:55 +0000 (12:50 +0200)]
drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()
We'll be expanding afe_clk() to take DSC into account. Switch to using
it where DSC matters. Which is really everywhere that
intel_dsi_bitrate() is currently used in ICL DSI code.
The functional difference is that we round the result closest instead of
down.
Jani Nikula [Tue, 10 Dec 2019 10:50:51 +0000 (12:50 +0200)]
drm/i915/dsc: make DSC source support helper generic
Move intel_dp_source_supports_dsc() from intel_dp.c as
intel_dsc_source_support() in intel_vdsc.c. The DSC source support is
more about DSC than about DP, and will be needed for DP independent
code.
Jani Nikula [Tue, 10 Dec 2019 10:50:48 +0000 (12:50 +0200)]
drm/i915/dsc: move DP specific compute params to intel_dp.c
Turns out future DSI specific parameters aren't workable with the
approach of having the encoder specific functions in intel_vdsc.c. Make
intel_dsc_compute_params() a helper that does the encoder independent
parts, and have encoder code call it. Move intel_dsc_dp_compute_params()
to intel_dp.c as intel_dp_dsc_compute_params().
Jani Nikula [Tue, 10 Dec 2019 10:50:47 +0000 (12:50 +0200)]
drm/i915/bios: add support for querying DSC details for encoder
Add function for retrieving the DSC data for an encoder.
Initially, this is DSI specific, as DP does not use VBT settings for DSC
at all. It's also not very pretty.
In the future we might have a pointer from encoder to the child device,
which would make the child device list query here so much more sensible.
v3:
- use crtc_state instead of pipe_config
- return true by default from intel_bios_get_dsc_params()
- expand the comment about rc_buffer_block_size and rc_buffer_size
Jani Nikula [Tue, 10 Dec 2019 10:50:46 +0000 (12:50 +0200)]
drm/i915/bios: parse compression parameters block
Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.
Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.
Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).
Matt Roper [Thu, 5 Dec 2019 22:48:48 +0000 (14:48 -0800)]
drm/i915/tgl: Program BW_BUDDY registers during display init
Gen12 can improve bandwidth efficiency by pairing up memory requests
with similar addresses. We need to program the BW_BUDDY1 and BW_BUDDY2
registers according to the memory configuration during display
initialization to take advantage of this capability.
The magic numbers we program here feel like something that could
definitely change on future platforms, so let's use a table-based
programming scheme to make this easy to extend in the future.
v2:
- Add separate table for Wa_1409767108. (Stan)
- Reorder structure reduce size by a word. Page mask can still be up
to 28 bits (even though current values are small) so we should keep
it as a u32, but just using a u8 for DRAM type instead of the actual
enum type saves space. (Lucas, Ville)
- Rename function to tgl_bw_buddy_init() to be more precise about what
it does. (Lucas)
Bspec: 49189
Bspec: 49218
Bspec: 52890 Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205224848.76712-1-matthew.d.roper@intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Colin Ian King [Tue, 10 Dec 2019 14:32:05 +0000 (14:32 +0000)]
drm/i915/selftests: fix uninitialized variable sum when summing up values
Currently the variable sum is not uninitialized and hence will cause an
incorrect result in the summation values. Fix this by initializing
sum to the first item in the summation.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 3c7a44bbbfa7 ("drm/i915/selftests: Perform some basic cycle counting of MI ops") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191210143205.338308-1-colin.king@canonical.com
Chris Wilson [Mon, 9 Dec 2019 02:32:15 +0000 (02:32 +0000)]
drm/i915/gt: Detect if we miss WaIdleLiteRestore
In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.
Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).
However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.
In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Closes: https://gitlab.freedesktop.org/drm/intel/issues/673 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@kernel.vger.org Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk
We now only use 1 client without any plan to add more. The client is
also only holding information about the WQ and the process desc, so we
can just move those in the intel_guc structure and always use stage_id
0.
v2: fix comment (John)
v3: fix the comment for real, fix kerneldoc
Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.
With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.
drm/i915/guc: add a helper to allocate and map guc vma
We already have a couple of use-cases in the code and another one will
come in one of the later patches in the series.
v2: use the new function for the CT object as well
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-2-daniele.ceraolospurio@intel.com
intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.
Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.
Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Fixes: 39e2df090c3c ("drm/i915/hdcp: update current transcoder into intel_hdcp") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Ville Syrjälä [Wed, 27 Nov 2019 20:12:22 +0000 (22:12 +0200)]
drm/i915/fbc: Reallocate cfb if we need more of it
The code assumes we can omit the cfb allocation once fbc
has been enabled once. That's nonsense. Let's try to
reallocate it if we need to.
The code is still a mess, but maybe this is enough to get
fbc going in some cases where it initially underallocates
the cfb and there's no full modeset to fix it up.
Cc: Daniel Drake <drake@endlessm.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jian-Hong Pan <jian-hong@endlessm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-15-ville.syrjala@linux.intel.com Tested-by: Daniel Drake <drake@endlessm.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Ville Syrjälä [Thu, 28 Nov 2019 15:03:38 +0000 (17:03 +0200)]
drm/i915/fbc: Wait for vblank after FBC disable on glk+
On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.
We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.
v2: Don't do the vblank wait if we never activated FBC in hw
Ville Syrjälä [Wed, 27 Nov 2019 20:12:19 +0000 (22:12 +0200)]
drm/i915/fbc: Start using flip nuke
The hardware automagically nukes the cfb on flip. We can use
that whenever the plane/crtc configuration doesn't change too
much. Let's hook that up.
We'll need this for glk+ since we need to introduce an extra
vblank wait after FBC disable. As we're currently disabling
FBC around all plane updates we'd slow them down by an extra
frame. Not a great user experience when your fps is always
capped at vrefres/2. With flip nuke we don't need the extra
vblank wait.
Ville Syrjälä [Wed, 27 Nov 2019 20:12:16 +0000 (22:12 +0200)]
drm/i915/fbc: Make fence_id optional for i965gm
i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.
In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.
Ville Syrjälä [Wed, 27 Nov 2019 20:12:12 +0000 (22:12 +0200)]
drm/i915/fbc: Remove the FBC_RT_BASE setup for ILK/SNB
We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.
Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.
Ville Syrjälä [Wed, 27 Nov 2019 20:12:09 +0000 (22:12 +0200)]
drm/i915/fbc: Disable fbc by default on all glk+
We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.
Cc: stable@vger.kernel.org Cc: Daniel Drake <drake@endlessm.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jian-Hong Pan <jian-hong@endlessm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
drm/i915/perf: Allow non-privileged access when OA buffer is not sampled
SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer.
Since reports from OA buffer had system wide visibility, collecting
samples from the OA buffer was a privileged operation on previous
platforms. Prior to TGL, it was also necessary to sample the OA buffer
to normalize reports from MI REPORT PERF COUNT.
TGL has a dedicated OAR unit to sample perf reports for a specific
render context. This removes the necessity to sample OA buffer.
- If not sampling the OA buffer, allow non-privileged access. An earlier
patch allows the non-privilege access:
https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1
- Clear up the path for non-privileged access in this patch
Chris Wilson [Sun, 8 Dec 2019 16:12:52 +0000 (16:12 +0000)]
drm/i915: Change i915_vma_unbind() to report -EAGAIN on activity
If someone else acquires the i915_vma before we complete our wait and
unbind it, we currently error out with -EBUSY. Use -EAGAIN instead so
that if necessary the caller is prepared to try again.
Chris Wilson [Sun, 8 Dec 2019 16:12:51 +0000 (16:12 +0000)]
drm/i915/gem: Avoid rcu_barrier() from shrinker paths
As i915_gem_object_unbind() waits on an rcu_barrier() to flush vm
releases (and destruction of their bound vma), we have to be careful not
to invoke that barrier from beneath the shrinker:
<4> [430.222671] WARNING: possible circular locking dependency detected
<4> [430.222673] 5.4.0-rc8-CI-CI_DRM_7508+ #1 Tainted: G U
<4> [430.222675] ------------------------------------------------------
<4> [430.222677] gem_pwrite/2317 is trying to acquire lock:
<4> [430.222678] ffffffff82248218 (rcu_state.barrier_mutex){+.+.}, at: rcu_barrier+0x23/0x190
<4> [430.222685]
but task is already holding lock:
<4> [430.222687] ffffffff82263a40 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.117+0x0/0x30
<4> [430.222691]
which lock already depends on the new lock.
Chris Wilson [Sat, 7 Dec 2019 22:26:44 +0000 (22:26 +0000)]
drm/i915/gem: Comment on inability to check args.pad for MMAP_OFFSET
Since we didn't check and insist that args.pad must be zero for MMAP_GTT
historically, we cannot insert a check now as old userspace may be
feeding in garbage. As such the lack of check is enshrined into the ABI,
so add a comment to remind us we cannot add the check later.
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
Linus Torvalds [Sun, 8 Dec 2019 20:23:42 +0000 (12:23 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Eleven patches, all in drivers (no core changes) that are either minor
cleanups or small fixes.
They were late arriving, but still safe for -rc1"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
scsi: megaraid_sas: Make poll_aen_lock static
scsi: sd_zbc: Improve report zones error printout
scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
scsi: qla2xxx: unregister ports after GPN_FT failure
scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
scsi: pm80xx: Remove unused include of linux/version.h
scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
scsi: scsi_transport_sas: Fix memory leak when removing devices
scsi: lpfc: size cpu map by last cpu id set
scsi: ibmvscsi_tgt: Remove unneeded variable rc
Linus Torvalds [Sun, 8 Dec 2019 20:12:18 +0000 (12:12 -0800)]
Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Nine cifs/smb3 fixes:
- one fix for stable (oops during oplock break)
- two timestamp fixes including important one for updating mtime at
close to avoid stale metadata caching issue on dirty files (also
improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
wire)
- two fixes for "modefromsid" mount option for file create (now
allows mode bits to be set more atomically and accurately on create
by adding "sd_context" on create when modefromsid specified on
mount)
- two fixes for multichannel found in testing this week against
different servers
- two small cleanup patches"
* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve check for when we send the security descriptor context on create
smb3: fix mode passed in on create for modetosid mount option
cifs: fix possible uninitialized access and race on iface_list
cifs: Fix lookup of SMB connections on multichannel
smb3: query attributes on file close
smb3: remove unused flag passed into close functions
cifs: remove redundant assignment to pointer pneg_ctxt
fs: cifs: Fix atime update check vs mtime
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
Linus Torvalds [Sun, 8 Dec 2019 19:08:28 +0000 (11:08 -0800)]
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"No common topic, just three cleanups".
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make __d_alloc() static
fs/namespace: add __user to open_tree and move_mount syscalls
fs/fnctl: fix missing __user in fcntl_rw_hint()
Linus Torvalds [Sun, 8 Dec 2019 01:07:18 +0000 (17:07 -0800)]
Merge tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap fixes from Darrick Wong:
"Fix a race condition and a use-after-free error:
- Fix a UAF when reporting writeback errors
- Fix a race condition when handling page uptodate on fragmented file
with blocksize < pagesize"
* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: stop using ioend after it's been freed in iomap_finish_ioend()
iomap: fix sub-page uptodate handling
Linus Torvalds [Sun, 8 Dec 2019 01:05:33 +0000 (17:05 -0800)]
Merge tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Fix a couple of resource management errors and a hang:
- fix a crash in the log setup code when log mounting fails
- fix a hang when allocating space on the realtime device
- fix a block leak when freeing space on the realtime device"
* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mount failure crash on invalid iclog memory access
xfs: don't check for AG deadlock for realtime files in bunmapi
xfs: fix realtime file data space leak
Linus Torvalds [Sun, 8 Dec 2019 00:59:25 +0000 (16:59 -0800)]
Merge tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs update from Mike Marshall:
"orangefs: posix open permission checking...
Orangefs has no open, and orangefs checks file permissions on each
file access. Posix requires that file permissions be checked on open
and nowhere else. Orangefs-through-the-kernel needs to seem posix
compliant.
The VFS opens files, even if the filesystem provides no method. We can
see if a file was successfully opened for read and or for write by
looking at file->f_mode.
When writes are flowing from the page cache, file is no longer
available. We can trust the VFS to have checked file->f_mode before
writing to the page cache.
The mode of a file might change between when it is opened and IO
commences, or it might be created with an arbitrary mode.
We'll make sure we don't hit EACCES during the IO stage by using
UID 0"
[ This is "posixish", but not a great solution in the long run, since a
proper secure network server shouldn't really trust the client like this.
But proper and secure POSIX behavior requires an open method and a
resulting cookie for IO of some kind, or similar. - Linus ]
* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: posix open permission checking...
Linus Torvalds [Sun, 8 Dec 2019 00:56:00 +0000 (16:56 -0800)]
Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"This is a relatively quiet cycle for nfsd, mainly various bugfixes.
Possibly most interesting is Trond's fixes for some callback races
that were due to my incomplete understanding of rpc client shutdown.
Unfortunately at the last minute I've started noticing a new
intermittent failure to send callbacks. As the logic seems basically
correct, I'm leaving Trond's patches in for now, and hope to find a
fix in the next week so I don't have to revert those patches"
* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
nfsd: depend on CRYPTO_MD5 for legacy client tracking
NFSD fixing possible null pointer derefering in copy offload
nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
nfsd: Ensure CLONE persists data and metadata changes to the target file
SUNRPC: Fix backchannel latency metrics
nfsd: restore NFSv3 ACL support
nfsd: v4 support requires CRYPTO_SHA256
nfsd: Fix cld_net->cn_tfm initialization
lockd: remove __KERNEL__ ifdefs
sunrpc: remove __KERNEL__ ifdefs
race in exportfs_decode_fh()
nfsd: Drop LIST_HEAD where the variable it declares is never used.
nfsd: document callback_wq serialization of callback code
nfsd: mark cb path down on unknown errors
nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
nfsd: minor 4.1 callback cleanup
SUNRPC: Fix svcauth_gss_proxy_init()
SUNRPC: Trace gssproxy upcall results
sunrpc: fix crash when cache_head become valid before update
nfsd: remove private bin2hex implementation
...
Linus Torvalds [Sun, 8 Dec 2019 00:50:55 +0000 (16:50 -0800)]
Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
copy of a file from one source server to a different target
server).
- New RDMA tracepoints for debugging congestion control and Local
Invalidate WRs.
Bugfixes and cleanups
- Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
layoutreturn
- Handle bad/dead sessions correctly in nfs41_sequence_process()
- Various bugfixes to the delegation return operation.
- Various bugfixes pertaining to delegations that have been revoked.
- Cleanups to the NFS timespec code to avoid unnecessary conversions
between timespec and timespec64.
- Fix unstable RDMA connections after a reconnect
- Close race between waking an RDMA sender and posting a receive
- Wake pending RDMA tasks if connection fails
- Fix MR list corruption, and clean up MR usage
- Fix another RPCSEC_GSS issue with MIC buffer space"
* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
SUNRPC: Capture completion of all RPC tasks
SUNRPC: Fix another issue with MIC buffer space
NFS4: Trace lock reclaims
NFS4: Trace state recovery operation
NFSv4.2 fix memory leak in nfs42_ssc_open
NFSv4.2 fix kfree in __nfs42_copy_file_range
NFS: remove duplicated include from nfs4file.c
NFSv4: Make _nfs42_proc_copy_notify() static
NFS: Fallocate should use the nfs4_fattr_bitmap
NFS: Return -ETXTBSY when attempting to write to a swapfile
fs: nfs: sysfs: Remove NULL check before kfree
NFS: remove unneeded semicolon
NFSv4: add declaration of current_stateid
NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
SUNRPC: Avoid RPC delays when exiting suspend
NFS: Add a tracepoint in nfs_fh_to_dentry()
NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
...
Steve French [Sat, 7 Dec 2019 23:38:22 +0000 (17:38 -0600)]
smb3: improve check for when we send the security descriptor context on create
We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.
Add check for that mount flag before calling ad_sd_context in
open init.
Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Linus Torvalds [Sat, 7 Dec 2019 22:51:04 +0000 (14:51 -0800)]
Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Remove hugepage checks for reserved pfns (Ben Luo)
- Fix irq-bypass unregister ordering (Jiang Yi)
* tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio:
vfio/pci: call irq_bypass_unregister_producer() before freeing irq
vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()
Linus Torvalds [Sat, 7 Dec 2019 22:49:20 +0000 (14:49 -0800)]
Merge tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- a patch to fix a build warning
- a cleanup of no longer needed code in the Xen event handling
- a small series for the Xen grant driver avoiding high order
allocations and replacing an insane global limit by a per-call one
- a small series fixing Xen frontend/backend module referencing
* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkback: allow module to be cleanly unloaded
xen/xenbus: reference count registered modules
xen/gntdev: switch from kcalloc() to kvcalloc()
xen/gntdev: replace global limit of mapped pages by limit per call
xen/gntdev: remove redundant non-zero check on ret
xen/events: remove event handling recursion detection
Linus Torvalds [Sat, 7 Dec 2019 22:43:46 +0000 (14:43 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc Kconfig updates from Andrew Morton:
"A number of changes to Kconfig files under lib/ from Changbin Du and
Krzysztof Kozlowski"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib/: fix Kconfig indentation
kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'
kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'
kernel-hacking: create a submenu for scheduler debugging options
kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGE
kernel-hacking: move Oops into 'Lockups and Hangs'
kernel-hacking: move kernel testing and coverage options to same submenu
kernel-hacking: group kernel data structures debugging together
kernel-hacking: create submenu for arch special debugging options
kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'
Heiner Kallweit [Sat, 7 Dec 2019 21:21:52 +0000 (22:21 +0100)]
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
In referenced fix we removed the RTL8168e-specific jumbo config for
RTL8168evl in rtl_hw_jumbo_enable(). We have to do the same in
rtl_hw_jumbo_disable().
v2: fix referenced commit id
Fixes: 14012c9f3bb9 ("r8169: fix jumbo configuration for RTL8168evl") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 7 Dec 2019 21:53:09 +0000 (13:53 -0800)]
pipe: don't use 'pipe_wait() for basic pipe IO
pipe_wait() may be simple, but since it relies on the pipe lock, it
means that we have to do the wakeup while holding the lock. That's
unfortunate, because the very first thing the waked entity will want to
do is to get the pipe lock for itself.
So get rid of the pipe_wait() usage by simply releasing the pipe lock,
doing the wakeup (if required) and then using wait_event_interruptible()
to wait on the right condition instead.
wait_event_interruptible() handles races on its own by comparing the
wakeup condition before and after adding itself to the wait queue, so
you can use an optimistic unlocked condition for it.
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 7 Dec 2019 21:21:01 +0000 (13:21 -0800)]
pipe: remove 'waiting_writers' merging logic
This code is ancient, and goes back to when we only had a single page
for the pipe buffers. The exact history is hidden in the mists of time
(ie "before git", and in fact predates the BK repository too).
At that long-ago point in time, it actually helped to try to merge big
back-and-forth pipe reads and writes, and not limit pipe reads to the
single pipe buffer in length just because that was all we had at a time.
However, since then we've expanded the pipe buffers to multiple pages,
and this logic really doesn't seem to make sense. And a lot of it is
somewhat questionable (ie "hmm, the user asked for a non-blocking read,
but we see that there's a writer pending, so let's wait anyway to get
the extra data that the writer will have").
But more importantly, it makes the "go to sleep" logic much less
obvious, and considering the wakeup issues we've had, I want to make for
less of those kinds of things.
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 7 Dec 2019 20:54:26 +0000 (12:54 -0800)]
pipe: fix and clarify pipe read wakeup logic
This is the read side version of the previous commit: it simplifies the
logic to only wake up waiting writers when necessary, and makes sure to
use a synchronous wakeup. This time not so much for GNU make jobserver
reasons (that pipe never fills up), but simply to get the writer going
quickly again.
A bit less verbose commentary this time, if only because I assume that
the write side commentary isn't going to be ignored if you touch this
code.
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 7 Dec 2019 20:14:28 +0000 (12:14 -0800)]
pipe: fix and clarify pipe write wakeup logic
The pipe rework ends up having been extra painful, partly becaused of
actual bugs with ordering and caching of the pipe state, but also
because of subtle performance issues.
In particular, the pipe rework caused the kernel build to inexplicably
slow down.
The reason turns out to be that the GNU make jobserver (which limits the
parallelism of the build) uses a pipe to implement a "token" system: a
parallel submake will read a character from the pipe to get the job
token before starting a new job, and will write a character back to the
pipe when it is done. The overall job limit is thus easily controlled
by just writing the appropriate number of initial token characters into
the pipe.
But to work well, that really means that the old behavior of write
wakeups being synchronous (WF_SYNC) is very important - when the pipe
writer wakes up a reader, we want the reader to actually get scheduled
immediately. Otherwise you lose the parallelism of the build.
The pipe rework lost that synchronous wakeup on write, and we had
clearly all forgotten the reasons and rules for it.
This rewrites the pipe write wakeup logic to do the required Wsync
wakeups, but also clarifies the logic and avoids extraneous wakeups.
It also ends up addign a number of comments about what oit does and why,
so that we hopefully don't end up forgetting about this next time we
change this code.
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiner Kallweit [Fri, 6 Dec 2019 22:27:15 +0000 (23:27 +0100)]
r8169: add missing RX enabling for WoL on RTL8125
RTL8125 also requires to enable RX for WoL.
v2: add missing Fixes tag
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe")
causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is
used in "rgmii-id" mode - the networking stops working.
Unfortunately, it's not enough to just move DT parsing code to .probe() as
it depends on phydev->interface value, which is set to correct value abter
the .probe() is completed and before calling .config_init(). So, RGMII
configuration can't be loaded from DT.
To fix and issue
- move RGMII validation code to .config_init()
- parse RGMII parameters in dp83867_of_init(), but consider them as
optional.
Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Now RX interrupt is triggered twice every time, because in
cpsw_rx_interrupt() it is asked first and then disabled. So there will be
pending interrupt always, when RX interrupt is enabled again in NAPI
handler.
Fix it by first disabling IRQ and then do ask.
Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 6 Dec 2019 04:43:46 +0000 (20:43 -0800)]
inet: protect against too small mtu values.
syzbot was once again able to crash a host by setting a very small mtu
on loopback device.
Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()
Also add a READ_ONCE() when the device mtu is read.
Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.
Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.
Hopefully we will add the missing ones in followup patches.
Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 6 Dec 2019 03:39:02 +0000 (19:39 -0800)]
gre: refetch erspan header from skb->data after pskb_may_pull()
After pskb_may_pull() we should always refetch the header
pointers from the skb->data in case it got reallocated.
In gre_parse_header(), the erspan header is still fetched
from the 'options' pointer which is fetched before
pskb_may_pull().
Found this during code review of a KMSAN bug report.
Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup") Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: William Tu <u9012063@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aditya Pakki [Thu, 5 Dec 2019 23:04:49 +0000 (17:04 -0600)]
pppoe: remove redundant BUG_ON() check in pppoe_pernet
Passing NULL to pppoe_pernet causes a crash via BUG_ON.
Dereferencing net in net_generici() also has the same effect. This patch
removes the redundant BUG_ON check on the same parameter.
Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
In the extreme case, we may wish to wait on an rcu-barrier to reap stale
vm to purge the last of the object bindings. However, we are not allowed
to use rcu_barrier() beneath the dma_resv (i.e. object) lock and do not
take lightly the prospect of unlocking a mutex deep in the bowels of the
routine. i915_gem_object_unbind() itself does not need the object lock,
and it turns out the callers do not need to the unbind as part of a
locked sequence around set-cache-level, so rearrange the code to avoid
taking the object lock in the callers.
<4> [186.816311] ======================================================
<4> [186.816313] WARNING: possible circular locking dependency detected
<4> [186.816316] 5.4.0-rc8-CI-CI_DRM_7486+ #1 Tainted: G U
<4> [186.816318] ------------------------------------------------------
<4> [186.816320] perf_pmu/1321 is trying to acquire lock:
<4> [186.816322] ffff88849487c4d8 (&mm->mmap_sem#2){++++}, at: __might_fault+0x39/0x90
<4> [186.816331]
but task is already holding lock:
<4> [186.816333] ffffe8ffffa05008 (&cpuctx_mutex){+.+.}, at: perf_event_ctx_lock_nested+0xa9/0x1b0
<4> [186.816339]
which lock already depends on the new lock.
projects / mirror_ubuntu-jammy-kernel.git / log