drm/i915/display: Use sink_format instead of ycbcr420_output flag
Start passing the sink_format, to all functions that take a bool
ycbcr420_output as parameter. This will make the functions generic,
and will serve as a slight step towards 4:2:2 support later.
v2: Rebased.
v3: Correct the checks in places concerned with pipe output. (Ville)
Other minor styling and refactoring fixes, as suggested by Ville.
drm/i915/dp: Configure PCON for conversion of output_format to YCbCr444
Handle the case with DP to HDMI PCON, where sink_format is set to YCbCr444.
In that case PCON is required to be configured to convert from given
output_format to YCbCR444.
v2: Drop drm_WARN for invalid case, let MISSING_CASE catch it. (Ville)
drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch uses the members of intel_dp->dfp to only store the
format conversion capabilities of the DP device and uses the crtc_state
sink_format member, to program the protocol-converter for
colorspace/format conversion.
v2: Use sink_format to determine the color conversion config for the
pcon (Ville).
v3: Fix typo: missing 'break' in switch case (lkp kernel test robot).
v4: Add helper to check if DP supports YCBCR420.
v5: Simplify logic for computing output_format, based on the given
sink_format. (Ville).
Added scaler constraint for YCbCr420 output.
v6: Split the patch for Scaler constraint for Ycbcr420.
v7: Simplify the policy for selecting output_format:
Always try for RGB first, followed by YCBCR444, and finally by YCBCR420.
v8: Removed redundant comments, minor refactoring. (Ville)
v9: Added member for ycbcr420 passthrough cap, fixed minor issues. (Ville)
drm/i915/display: Add new member to configure PCON color conversion
The decision to use DFP output format conversion capabilities should be
during compute_config phase.
This patch adds new member to crtc_state to represent the final
output_format to the sink. In case of a DFP this can be different than
the output_format, as per the format conversion done via the PCON.
This will help to store only the format conversion capabilities of the
DP device in intel_dp->dfp, and use crtc_state to compute and store the
configuration for color/format conversion for a given mode.
v2: modified the new member to crtc_state to represent the final
output_format that eaches the sink, after possible conversion by
PCON kind of devices. (Ville)
v3: Addressed comments from Ville:
-Added comments to clarify difference between sink_format and
output_format.
-Corrected the order of setting sink_format and output_format.
-Added readout for sink_format in get_pipe_config hooks.
v4: Set sink_format for intel_sdvo too. (Ville)
v5: Rebased.
v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville)
v7: Fix the condition to set sink_format for HDMI.
Set hdmi output_format simply as sink_format. (Ville)
drm_dp_dsc_sink_max_slice_count() may return 0 if something goes
wrong on the part of the DSC sink and its DPCD register. This null
value may be later used as a divisor in intel_dsc_compute_params(),
which will lead to an error.
In the unlikely event that this issue occurs, fix it by testing the
return value of drm_dp_dsc_sink_max_slice_count() against zero.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
drm/i915: Fix NULL ptr deref by checking new_crtc_state
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
drm/i915: Communicate display power demands to pcode
Display to communicate display pipe count/CDCLK/voltage configuration
to Pcode for more accurate power accounting for DG2.
Existing sequence is only sending the voltage value to the Pcode.
Adding new sequence with current cdclk associate with voltage value masking.
Adding pcode request when any pipe power well will disable or enable.
v2: - Make intel_cdclk_need_serialize static to make CI compiler happy.
v3: - Removed redundant return(Jani Nikula)
- Changed intel_cdclk_power_usage_to_pcode_(pre|post)_notification to be
static and also naming to intel_cdclk_pcode_(pre|post)_notify(Jani Nikula)
- Changed u8 to be u16 for cdclk parameter in intel_pcode_notify function,
as according to BSpec it requires 10 bits(Jani Nikula)
- Replaced dev_priv's with i915's(Jani Nikula)
- Simplified expression in intel_cdclk_need_serialize(Jani Nikula)
- Removed redundant kernel-doc and indentation(Jani Nikula)
v4: - Fixed some checkpatch warnings
v5: - According to HW team comments that change should affect only DG2,
fix correspodent platform check to account this.
v6: - Added one more missing IS_DG2 check(Vinod Govindapillai)
Ville Syrjälä [Wed, 26 Apr 2023 13:50:17 +0000 (16:50 +0300)]
drm/i915: Define bitmasks for skl+ scaler window pos/size
Define and use the bitmasks for the x/y components
of the skl+ scaler window pos/size registers.
We stick to the full 16 bits mask here even though the
hardware limits are actually lower. The current (ADL)
hardware maximums are in fact: 14 bits for X size, 13 bits
for X pos, 13 bits for Y size/pos. Yes, that is correct,
X pos has less bits than the X size for some reason. But
that doesn't actually matter for now as we don't currently
even support such wide displays without the use of bigjoiner
(due to max plane width limit).
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Ville Syrjälä [Wed, 26 Apr 2023 13:50:13 +0000 (16:50 +0300)]
drm/i915: Define bitmasks for ilk pfit window pos/size
Define and use the bitmasks for the x/y components
of the ilk+ panel filter window pos/size registers.
Note that we stick to the full 16 bit mask even though
the actual hardware limits are lower (and somewhat
platform dependent). BDW is actually limited to
13 bits horizontal and 12 bits vertical, with the high
bits being hardwired to zero. HSW should have the same
limits as BDW. And pre-HSW should be limited to 12bits
in both directions as that's already the limit of the
transcoder timing registers. Curiously on HSW and earlier
platforms all 16 bits can actually be set, but presumably
the hardware ignores the high bits.
v2: Switch back to full 16bit masks since that's what
we use transcoder timign regs and PIPESRC as well
Unlike previous platforms that used PORT_TX_DFLEXDPSP
for max_lane calculation, MTL uses only PORT_TX_DFLEXPA1
from which the max_lanes has to be calculated.
Bspec: 50235, 65380
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Jose Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-13-mika.kahola@intel.com
Imre Deak [Fri, 28 Apr 2023 09:54:31 +0000 (12:54 +0300)]
drm/i915/mtl: TypeC HPD live status query
The HPD live status for MTL has to be read from different set of
registers. MTL deserves a new function for this purpose
and cannot reuse the existing HPD live status detection
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-12-mika.kahola@intel.com
Mika Kahola [Fri, 28 Apr 2023 09:54:30 +0000 (12:54 +0300)]
drm/i915/mtl: Power up TCSS
Add register writes to enable powering up Type-C subsystem i.e. TCSS.
For MeteorLake we need to request TCSS to power up and check the TCSS
power state after 500 us.
In addition, for PICA we need to set/clear the Type-C PHY ownnership
bit when Type-C device is connected/disconnected.
Xe_LPD+ defines interrupt bits for only DDI ports in the DE Port
Interrupt registers. The bits for Type-C ports are defined in the PICA
interrupt registers.
Mika Kahola [Fri, 28 Apr 2023 09:54:22 +0000 (12:54 +0300)]
drm/i915/mtl: C20 HW readout
Create a table for C20 DP1.4, DP2.0 and HDMI2.1 rates.
The PLL settings are based on table, not for algorithmic alternative.
For DP 1.4 only MPLLB is in use.
Once register settings are done, we read back C20 HW state.
Mika Kahola [Fri, 28 Apr 2023 09:54:21 +0000 (12:54 +0300)]
drm/i915/mtl: C20 PLL programming
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and
HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add
4 lane support for c20.
v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK)
Fix lane check (RK)
Fix multiline commenting (Arun)
use usleep_range() instead of msleep() (Andi)
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-2-mika.kahola@intel.com
Hans de Goede [Tue, 25 Apr 2023 19:44:41 +0000 (21:44 +0200)]
drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.
Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
Type-C PHYs are taking longer than expected for Aux IO Power Enabling.
Workaround: Increase the timeout.
---v2
-change style on how we mention WA [Ankit]
-fix bat error by creating new func that is only called for aux power
well scenarios so we can avoid null pointer error as it is called
everywhere.
--v3
-Add non-default enable_timeout to power well descriptor which avoids
adding more platform checks [Imre]
--v4
-Remove Bspec link from top to bottom remove WA link from commit put it
on comment [Jani]
-enable_timeout in ms and add .fixed_enable_delay too [Imre]
--v5
-move power_wells instead of duplicating them [Imre]
Imre Deak [Mon, 24 Apr 2023 20:02:05 +0000 (23:02 +0300)]
drm/i915/adlp+: Disable DC5/6 states for TC port DDI/AUX and for combo port AUX
On ADLP+ Bspec allows DC5/6 to be enabled while power well 2 is enabled.
Since the AUX and DDI power wells (except for port A/B) are also backed
by power well 2, this would suggest that DC5/6 can be enabled while any
of these AUX or DDI port functionalities are used. As opposed to this
AUX transfers will time out on ADLP TypeC ports while DC6 is enabled.
Until the restriction for DC5/6 is clarified in Bspec let's assume that
the intention is to allow for using these power states while pipe A/B is
enabled, but only for combo ports which can be used with eDP outputs.
Similarly assume that AUX transaction initiated by the driver on any port
requires DC states to be disabled.
Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Fixes: 88c487938414 ("drm/i915: Use separate "DC off" power well for ADL-P and DG2") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230424200205.1732941-1-imre.deak@intel.com
Communicating QGV points restriction to PUnit happens via PM Demand
instead of the Pcode mailbox in the previous platforms. GV point
restriction is handled by the PM demand code.
Ville Syrjälä [Tue, 11 Apr 2023 19:14:29 +0000 (22:14 +0300)]
drm/i915/psr: Sprinkle cpu_transcoder variables around
Reduce the 'intel_dp' stuff a bit by introducing local
cpu_transcoder variables.
Ideally I'd like the whole PSR code to stop using intel_dp
except during a full modeset, but dunno yet if that's
possible. But the less 'intel_dp' we have sprad around
the easier that should be to figure out eventually.
Ville Syrjälä [Tue, 11 Apr 2023 19:14:28 +0000 (22:14 +0300)]
drm/i915/psr: Include PSR_PERF_CNT in debugfs output on all platforms
The fact that DC states reset the PSR perofrmance counter
is no reason not to include it in the debug output.
But let's keep the comment there to remind people about
that caveat.
Ville Syrjälä [Tue, 11 Apr 2023 19:14:27 +0000 (22:14 +0300)]
drm/i915/psr: Add a FIXME for the PSR vs. AUX usage conflict
We need to disable PSR when we are doing AUX by hand, otherwise
it's possible that the PSR hardware could be using the AUX CH
while we try to do our manual stuff. Add a FIXME for now.
Ville Syrjälä [Tue, 11 Apr 2023 19:14:26 +0000 (22:14 +0300)]
drm/i915/psr: Define more PSR mask bits
Define more of the PSR mask bits, and describe in detail
what some of them do. Even if we don't set them all from
the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun, and re-reverse engineering the behaviour every
time is time consuming (even if a bit more fun than spec
trawling).
v2: Moar bits
Put the description into a comment to be easily available
v2: Fix the BDW_UNMASK_VBL_TO_REGS_IN_SRD/HSW_UNMASK_VBL_TO_REGS_IN_SRD
description
Rebase due to intel_psr_regs.h
Ville Syrjälä [Tue, 11 Apr 2023 19:14:22 +0000 (22:14 +0300)]
drm/i915: Fix up whitespace in some display chicken registers
Fix a bunch of whitespace issues in some display register
definitons. Only touching the bits alerayd using REG_BIT() &
co. here. The rest will come later.
Ville Syrjälä [Tue, 18 Apr 2023 17:55:20 +0000 (20:55 +0300)]
drm/i915: Use REG_BIT() & co. for ilk+ pfit registers
Polish the ilk+ pfit registers with REG_BIT() & co., and
also take the opportunity to unify the ivb/hsw vs. not checks
in ilk_pfit_enable() and ilk_get_pfit_config().
Ville Syrjälä [Tue, 18 Apr 2023 17:55:14 +0000 (20:55 +0300)]
drm/i915: Check pipe source size when using skl+ scalers
The skl+ scalers only sample 12 bits of PIPESRC so we can't
do any plane scaling at all when the pipe source size is >4k.
Make sure the pipe source size is also below the scaler's src
size limits. Might not be 100% accurate, but should at least be
safe. We can refine the limits later if we discover that recent
hw is less restricted.
Matt Roper [Tue, 18 Apr 2023 22:04:44 +0000 (15:04 -0700)]
drm/i915/mtl: Re-use ADL-P's "DC off" power well
As with ADL-P, MTL's "DC off" power well should be a dependency of the
PGC and PGD power wells, not the entire PG2 well. In fact, the DC5/DC6
requirements between the two platforms are the same, so the Xe_LPD "DC
off" well definition can just be re-used for Xe_LPD+.
Matt Roper [Tue, 18 Apr 2023 22:04:43 +0000 (15:04 -0700)]
drm/i915: Use separate "DC off" power well for ADL-P and DG2
Although ADL-P and DG2 both use the same general power well setup, the
DC5/DC6 requirements are slightly different which means each platform
should have its own "DC off" power well.
DG2 (i.e., Xe_HPD IP) requires that DC5 be disabled whenever PG2 is
active. However ADL-P (i.e., Xe_LPD IP) only requires DC5/DC6 to be
disabled when the PGC or PGD subwells are active; we should be able to
remain in these DC states when PGB and general PG2 functionality is in
use.
v2: Use dc_of as power well name.
Move xehpd power domain definitions near power well definition.(Imre)
Jani Nikula [Wed, 19 Apr 2023 09:42:43 +0000 (12:42 +0300)]
drm/i915: use explicit includes for i915_reg.h and i915_irq.h
A lot of places include i915_reg.h implicitly via i915_irq.h, which gets
included implicitly via intel_display_trace.h. Remove the includes from
the headers, and include i915_reg.h and i915_irq.h explicitly where
needed.
Imre Deak [Fri, 14 Apr 2023 17:38:00 +0000 (20:38 +0300)]
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
The port PLL selection needs to be up-to-date in the CRTC state of both
the primary and all secondary MST streams. The commit removing the
encoder update_prepare/complete hooks (see Fixes: below), stopped doing
this for secondary streams, fix this up.
Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
Ville Syrjälä [Mon, 17 Apr 2023 13:17:27 +0000 (16:17 +0300)]
drm/i915: Check HPD live state during eDP probe
We need to untangle the mess where some SKL machines (at least)
declare both DDI A and DDI E to be present in their VBT, and
both using AUX A. DDI A is a ghost eDP, wheres DDI E may be a
real DP->VGA converter.
Currently that is handled by checking the VBT child devices
for conflicts before output probing. But that kind of solution
will not work for the ADL phantom dual eDP VBTs. I think on
those we just have to probe the eDP first. And would be nice
to use the same probe scheme for everything.
On these SKL systems if we probe DDI A first (which is only
natural given it's declared by VBT first) we will get an answer
via AUX, but it came from the DP->VGA converter hooked to the
DDI E, not DDI A. Thus we mistakenly register eDP on DDI A
and screw up the real DP device in DDI E.
To fix this let's check the HPD live state during the eDP probe.
If we got an answer via DPCD but HPD is still down let's assume
we got the answer from someone else.
Smoke tested on all my eDP machines (ilk,hsw-ult,tgl,adl) and
I also tested turning off all HPD hardware prior to loading
i915 to make sure it all comes up properly. And I simulated
the failure path too by not turning on HPD sense and that
correctly gave up on eDP.
I *think* Windows might just fully depend on HPD here. I
couldn't really find any other way they probe displays. And
I did find code where they also check the live state prior
to AUX transfers (something Imre and I have also talked
about perhaps doing). That would also solve this as we'd
not succeed in the eDP probe DPCD reads.
Other solutions I've considered:
- Reintrduce DDI strap checks on SKL. Unfortunately we just
don't have any idea how reliable they are on real production
hardware, and commit 5a2376d1360b ("drm/i915/skl: WaIgnoreDDIAStrap
is forever, always init DDI A") does suggest that not very.
Sadly that commit is very poor in details :/
Also the systems (Asrock B250M-HDV at least) fixed by commit 41e35ffb380b ("drm/i915: Favor last VBT child device with
conflicting AUX ch/DDC pin") might still not work since we
don't know what their straps indicate. Stupid me for not
asking the reporter to check those at the time :(
We have currently two CI machines (fi-cfl-guc,fi-cfl-8700k
both MS-7B54/Z370M) that also declare both DDI A and DDI E
in VBT to use AUX A, and on these the DDI A strap is also
set. There doesn't seem to be anything hooked up to either
DDI however. But given the DDI A strap is wrong on these it
might well be wrong on the Asrock too.
Most other CI machines seem to have straps that generally
match the VBT. fi-kbl-soraka is an exception though as DDI D
strap is not set, but it is declared in VBT as a DP++ port.
No idea if there's a real physical port to go with it or not.
- Some kind of quirk just for the cases where both DDI A and DDI E
are present in VBT. Might be feasible given we've ignored
DDI A in these cases up to now successfully. But feels rather
unsatisfactory, and not very future proof against funny VBTs.
Ville Syrjälä [Mon, 17 Apr 2023 13:17:26 +0000 (16:17 +0300)]
drm/i915: Introduce intel_hpd_enable_detection()
Add a mechanism by which we can enable the HPD sense for
individual encoders.
This will be used during eDP probing to figure out if
anything is actually connected. The normal intel_hpd_irq_setup()
thing doesn't work since we only do that after probing the
outputs, and we only enable HPD sense for encoders that were
successfully probed.
The other idea that crossed my minds was to just turn on
HPD sense for all pins before output probing and let hpd_irq_setup()
clean it up afterwards. But that doesn't work for BXT/GLK where
the HPD invert information comes from the VBT child device.
So looks like this really needs to be per-encoder.
v2: Give it a better name (Jani)
v3: Deal with mtl
Ville Syrjälä [Mon, 17 Apr 2023 13:17:25 +0000 (16:17 +0300)]
drm/i915: Introduce <platform>_hotplug_mask()
Pair each <platform>_hotplug_enables() function with
a corresponding <platform>_hotplug_mask() function so that
we can determine right bits to clear on a per hpd_pin basis.
We'll need this for turning on HPD sense for a specific
encoder rather than just all of them.
v2: Drop the unused 'i915' param (Jani)
v3: Drop the _foo_hotplug_enables() redirection too
v4: Deal with mtp
Add intel_display_driver_early_probe() as the early probe call to
replace intel_init_display_hooks(). The latter will be "demoted" to
setting up hooks in intel_display.c only.
Jani Nikula [Fri, 14 Apr 2023 09:41:59 +0000 (12:41 +0300)]
drm/i915/display: add intel_display_reset.[ch]
Split out the display reset functionality to a separate file to
declutter intel_display.c. Rename the functions accordingly. The minor
downside is having to expose __intel_display_resume().
Jani Nikula [Fri, 14 Apr 2023 09:41:54 +0000 (12:41 +0300)]
drm/i915/display: start high level display driver file
The only way to truly clean up intel_display.[ch] is to move stuff out
of them until there's absolutely nothing left.
Start moving the high level display driver entry points, i.e. functions
called from top level driver code only, to a new file, which we'll call
intel_display_driver.c. The intention is that there's no low-level
display code or details here. This is an in-between layer.
Initially, move intel_display_driver_register() and
intel_display_driver_unregister() there.
Ville Syrjälä [Fri, 14 Apr 2023 19:01:59 +0000 (22:01 +0300)]
drm/i915: Make intel_{mpllb,c10pll}_state_verify() safer
intel_{mpllb,c10pll}_state_verify() blows up if you call them
for a non-modeset/fastset commit on account of the relevant
connector not being part of the overall atomic state.
Currently the state checker only runs for modeset/fastset
commits, but for testing purposes it is sometimes desirable
to run it for other commits too. Check for modeset/fastset
in intel_{mpllb,c10pll}_state_verify() itself to make this safe.
v2: Give the new intel_c10pll_state_verify() the same treatment
Add comment to explain why we do this
Ville Syrjälä [Thu, 13 Apr 2023 20:06:02 +0000 (23:06 +0300)]
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
The point of the WARN was to print something, not oops
straight up. Currently that is precisely what happens
if we can't find the connector for the crtc in the atomic
state. Get the dev pointer from the atomic state instead
of the potentially NULL encoder to avoid that.
Clint Taylor [Thu, 13 Apr 2023 21:24:43 +0000 (14:24 -0700)]
drm/i915/mtl: Initial DDI port setup
Initialization sequences and C10 phy are in place to be able to enable
the first 2 ports of MTL. The other ports use C20 phy that still need
to be properly added. Enable the first ports for now, keeping a TODO
comment about the others.
drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI
MTL requires the PORT_CTL_WIDTH, TRANS_DDI_FUNC_CTL and DDI_BUF_CTL
to be filled with 4 lanes for TMDS mode.
This patch enables D2D link and fills PORT_WIDTH in appropriate
registers.
v2:
- Added fixes from Clint's Add HDMI implementation changes.
- Modified commit message.
v3:
- Use TRANS_DDI_PORT_WIDTH() instead of DDI_PORT_WIDTH() for the value
of TRANS_DDI_FUNC_CTL_*. (Gustavo)
Like DG2, we still don't have a proper algorithm that can be used
for calculating PHY settings, but we do have tables of register
values for a handful of the more common link rates. Some support is
better than none, so let's go ahead and add/use these tables when we
can, and also add some logic to hdmi_port_clock_valid() to filter the
modelist to just the modes we can actually support with these link
rates.
Hopefully we'll have a proper / non-encumbered algorithm to calculate
these registers by the time we upstream and we'll be able to replace
this patch with something more general purpose.
Bspec: 64568
v2: Rebasing with Clint's HDMI C10 PLL tables (Mika)
v3: Remove the extra hdmi clock check pruning.
Cc: Imre Deak <imre.deak@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-8-radhakrishna.sripada@intel.com
The differences between MTL and TGL DP sequences are big enough to
MTL have its own functions.
Also it is much easier to follow MTL sequences against spec with
its own functions.
One change worthy to mention is the move of
'intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain)'.
This call is not necessary for MTL but we have _put() counter part in
intel_ddi_post_disable_dp() that needs to balanced.
We could add a display version check on it but instead here it is
moving it to intel_ddi_pre_enable_dp() so it is executed for all
platforms in a single place and this will not cause any harm in MTL
and newer platforms.
v2:
- Fix logic to wait for buf idle.
- Use the right register to wait for ddi active.(RK)
v3:
- Increase wait timeout for ddi buf active (Mika)
v4:
- Increase idle timeout for ddi buf idle (Mika)
v5: use rmw in mtl_disable_ddi_buf. Donot clear
link training mask(Imre)
BSpec: 65448 65505 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Satyeshwar Singh <satyeshwar.singh@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-7-radhakrishna.sripada@intel.com
Mika Kahola [Thu, 13 Apr 2023 21:24:39 +0000 (14:24 -0700)]
drm/i915/mtl: MTL PICA hotplug detection
PICA is used for DP alt mode and TBT modes. Hotplug interruption is routed
from PICA chip to south display engine and from there to north display
engine. This patch adds functionality to enable hotplug detection for
all Type-C ports (4 ports available).
Differently from HPD in south display, PICA provides a dedicated HPD
control register for each supported port, so we loop over ports
ourselves instead of using intel_hpd_hotplug_enables() or
intel_get_hpd_pins().
Mika Kahola [Thu, 13 Apr 2023 21:24:38 +0000 (14:24 -0700)]
drm/i915/mtl: Add vswing programming for C10 phys
C10 phys uses direct mapping internally for voltage and pre-emphasis levels.
Program the levels directly to the fields in the VDR Registers.
Bspec: 65449
v2: From table "C10: Tx EQ settings for DP 1.4x" it shows level 1
and preemphasis 1 instead of two times of level 1 preemphasis 0.
Fix this in the driver code as well.
v3: VSwing update (Clint)
v4: Add vboost termination ctl programming(Imre)
Fix tx llogic and other nits
Restrict C10 vdr ctl register access for C10 phy(RK)
v5: Program vboots, termination ctl for both lanes(Imre)
Cc: Imre Deak <imre.deak@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com>(v3) Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-5-radhakrishna.sripada@intel.com
drm/i915/mtl: Add Support for C10 PHY message bus and pll programming
XELPDP has C10 and C20 phys from Synopsys to drive displays. Each phy
has a dedicated PIPE 5.2 Message bus for configuration. This message
bus is used to configure the phy internal registers.
XELPDP has C10 phys to drive output to the EDP and the native output
from the display engine. Add structures, programming hardware state
readout logic. Port clock calculations are similar to DG2. Use the DG2
formulae to calculate the port clock but use the relevant pll signals.
Note: PHY lane 0 is always used for PLL programming.
Add sequences for C10 phy enable/disable phy lane reset,
powerdown change sequence and phy lane programming.
v2: Squash patches related to C10 phy message bus and pll
programming support (Jani)
Move register definitions to a new file i.e. intel_cx0_reg_defs.h (Jani)
Move macro definitions (Jani)
DP rates as separate patch (Jani)
Spin out xelpdp register definitions into a separate file (Jani)
Replace macro to select registers based on phy lane with
function calls (Jani)
Fix styling issues (Jani)
Call XELPDP_PORT_P2M_MSGBUS_STATUS() with port instead of phy (Lucas)
v3: Move clear request flag into try-loop
v4: On PHY idle change drm_err_once() as drm_dbg_kms() (Jani)
use __intel_de_wait_for_register() instead of __intel_wait_for_register
and uncomment intel_uncore.h (Jani)
Add DP-alt support for PHY lane programming (Khaled)
v4: Add tx and cmn on c10mpllb_state (Imre)
Add missing waits for pending transactions between two message bus
writes (Imre)
General cleanups and simplifications (Imre)
v5: Few nit cleanups from rev4 (imre)
s/dev_priv/i915/ , s/c10mpllb/c10pll/ (RK)
Rebase
v6: Move the mtl code from intel_c10pll_calc_port_clock to mtl function
Fix typo in comment for REG_FIELD_PREP8 definition(Imre)
Cc: Mika Kahola <mika.kahola@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> (v4) Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-4-radhakrishna.sripada@intel.com
Jani Nikula [Tue, 11 Apr 2023 10:56:43 +0000 (13:56 +0300)]
drm/i915: hide mkwrite_device_info() better
The goal has been to just make device info a pointer to static const
data, i.e. the static const structs in i915_pci.c. See [1]. However,
there were issues with intel_device_info_runtime_init() clearing the
display sub-struct of device info on the !HAS_DISPLAY() path, which
consequently disables a lot of display functionality, like it
should. Looks like we'd have to cover all those paths, and maybe
sprinkle HAS_DISPLAY() checks in them, which we haven't gotten around
to.
In the mean time, hide mkwrite_device_info() better within
intel_device_info.c by adding a intel_device_info_driver_create() for
the very early initialization of the device info and initial runtime
info. This also lets us declutter i915_drv.h a bit, and stops promoting
mkwrite_device_info() as something that could be used.
drm/i915/debugfs: New debugfs for display clock frequencies
Instead of mixing display & non-display stuff together, move
display specific clock info to new debugfs. This patch will
create a new debugfs "i915_cdclk_info" to expose Current & Max
cdclk and Max pixel clock frequency info.
Example:
$ cat /sys/kernel/debug/dri/0/i915_cdclk_info
Current CD clock frequency: 163200 kHz
Max CD clock frequency: 652800 kHz
Max pixel clock frequency: 1305600 kHz
V2: - s/i915_display_clock_info/i915_cdclk_info/ (Jani)
- Move the logic to intel_cdclk.c (Jani)
- Don't remove info from i915_frequency_info (Jani)
V3: - Drop locking (Jani)
Ville Syrjälä [Tue, 4 Apr 2023 17:54:30 +0000 (20:54 +0300)]
drm/i915: Evade transcoder's vblank when doing seamless M/N changes
The transcoder M/N values are double buffered on the transcoder's
undelayed vblank. So when doing seamless M/N fastsets we need to
evade also that.
Note that currently the pipe's delayed vblank == transcoder's
undelayed vblank, so this is still a nop change. But in the
future when we may have to delay the pipe's vblank to create
a register programming window ("window2") for the DSB.
Ville Syrjälä [Tue, 4 Apr 2023 17:54:29 +0000 (20:54 +0300)]
drm/i915: Allow arbitrary refresh rates with VRR eDP panels
If the panel supports VRR it must be capable of accepting
timings with arbitrary vblank length, within the valid VRR
range. Use that fact to allow the user to request any refresh
rate they like. We simply pick the next highest fixed mode
from our list, and adjust the vblank to get the desired refresh
rate in the end.
Of course currently everything to do with the vrefresh is
using 1Hz precision, so might not be exact. But we can improve
that in the future by just upping our vrefresh precision.
Ville Syrjälä [Tue, 28 Mar 2023 12:23:57 +0000 (15:23 +0300)]
drm/i915: Flag purely internal commits to not clear crtc_state->inherited
If we have to force the hardware to go through a full modeset
due to eg. cdclk reprogramming, we need to preserve
crtc_state->inherited for all crtcs that have not otherwise
gone through the whole compute_config() stuff after connectors
have been detected.
Otherwise eg. cdclk induced modeset glk_force_audio_cdclk()
will clear the inherited flag, and thus the first real commit
coming from userspace later on will not be forced through
the full .compute_config() path and so eg. audio state may
not get properly recomputed.
But instead of adding all kinds of ad-hoc crtc_state->inherited
preservation hacks all over, let's change things so that we
only clear it for the crtcs directly included in userspace/client
initiated commits.
Should be far less fragile since now we just need to remember
to flag the internal commits, and not worry about where new
crtcs might get pulled in.
Ville Syrjälä [Tue, 21 Mar 2023 13:56:15 +0000 (15:56 +0200)]
drm/i915/vrr: Relocate VRR enable/disable
Move VRR enabling/disabling into a place where it also works
for fastsets.
With this we always start the transcoder up in non-VRR mode.
Granted we already did that but for a very short period of
time. But now that we might end up doing a bit more with the
transcoder in non-VRR mode it seems prudent to also update
the active timings as the transcoder changes its operating
mode.
crtc_state->vrr.enable still tracks whether VRR is actually
enabled or not, but now we configure all the other VRR timing
registers whenever VRR is possible (whether we actually enable
it or not). crtc_state->vrr.flipline can now serve as our
"is VRR possible" bit of state.
I decided to leave the MSA timing ignore bit set all the time
whether VRR is actually enabled or not. If the sink can figure
out the timings with that information when VRR is active then
surely it can also do it when VRR is inactive.
v2: Protect intel_vrr_set_transcoder_timings() with HAS_VRR()
Ville Syrjälä [Mon, 20 Mar 2023 20:33:50 +0000 (22:33 +0200)]
drm/i915/vrr: Tell intel_crtc_update_active_timings() about VRR explicitly
In order to move VRR enable/disable to a place where it's also
applicable to fastsets we need to be prepared to configure
the pipe into non-VRR mode initially, and then later switch
to VRR mode. To that end allow the active timings to be configured
in non-VRR mode temporarily even when the crtc_state says we're
going to be using VRR.
Ville Syrjälä [Mon, 20 Mar 2023 20:33:49 +0000 (22:33 +0200)]
drm/i915/vrr: Make delayed vblank operational in VRR mode on adl/dg2
On adl/dg2 a chicken bit needs to be set for TRANS_SET_CONTENXT_LATENCY
to take effect in VRR mode. Can't really think of a reason why we'd
ever disable that chicken bit, so let's just always set it.
Ville Syrjälä [Wed, 29 Mar 2023 13:50:00 +0000 (16:50 +0300)]
drm/i915: Include the csc matrices in the crtc state dump
Include the csc matrices in the state dump. The format being
hardware specific we just dump as hex for now. Might have
to think of some way to get a bit more human readable
output...
projects / mirror_ubuntu-kernels.git / log