Chris Wilson [Tue, 22 May 2018 08:36:43 +0000 (09:36 +0100)]
drm/i915/gtt: Allow pagedirectory allocations to fail
As we handle the allocation failure of the page directory and tables by
propagating the failure back to userspace, allow it to fail if direct
reclaim is unable to satisfy the request (i.e. disable the oomkiller).
The premise being that if we are unable to allocate a single page for
the pagetable, we will not be able to handle the multitude of pages
required for the gfx operation and we should back off to allow the
system to recover.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106609 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522083643.29601-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 21 May 2018 21:05:30 +0000 (22:05 +0100)]
drm/i915/query: Protect tainted function pointer lookup
Smatch identifies i915_query_ioctl() as being a potential victim of
Spectre due to its use of a tainted user index into a function pointer
array. Use array_index_nospec() to defang the user index before using it
to lookup the function pointer.
Per the report, no matter what display mode you select with xrandr, the
i915 driver will always select the alternate fixed mode. For the
reporter this means that the display will always run at 40Hz which is
quite annoying. This may be due to the mode comparison.
But there are some other potential issues. The choice of alt_fixed_mode
seems dubious. It's the first non-preferred mode, but there are no
guarantees that the only difference would be refresh rate. Similarly,
there may be more than one preferred mode in the probed modes list, and
the commit changes the preferred mode selection to choose the last one
on the list instead of the first.
(Note that the probed modes list is the raw, unfiltered, unsorted list
of modes from drm_add_edid_modes(), not the pretty result after a
drm_helper_probe_single_connector_modes() call.)
Finally, we already have eerily similar code in place to find the
downclock mode for DRRS that seems like could be reused here.
Back to the drawing board.
Note: This is a hand-crafted revert due to conflicts. If it fails to
backport, please just try reverting the original commit directly.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469 Reported-by: Rune Petersen <rune@megahurts.dk> Reported-by: Mark Spencer <n7u4722r35@ynzlx.anonbox.net> Fixes: dc911f5bd8aa ("drm/i915/edp: Allow alternate fixed mode for eDP if available.") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180516080110.22770-1-jani.nikula@intel.com
Zhenyu Wang [Mon, 21 May 2018 08:17:52 +0000 (16:17 +0800)]
drm/i915/gvt: Fix crash after request->hw_context change
When we do shadowing, workload's request might not be allocated yet,
so we still require shadow context's object. And when complete workload,
delay to zero workload's request pointer after used for update guest context.
v2: Move request alloc earlier as already try to track shadow status
depending on request state, which also facilitate to use request->hw_context
for target engine context reference.
Fixes: 1fc44d9b1afb ("drm/i915: Store a pointer to intel_context in i915_request") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180521081752.31056-1-zhenyuw@linux.intel.com
Chris Wilson [Thu, 17 May 2018 14:24:41 +0000 (15:24 +0100)]
drm/i915/selftests: Wait longer for the old active request
When testing reset, we wait for 1s on the main thread for the hang to
start. Meanwhile, we continue submitting requests on all the background
threads, and we may have more threads than cores and so potentially
starve the waiter from being woken within the timeout. As the hang
timeout and the active timeouts are the same, it is hard to distinguish
which caused the timeout. Bump the active thread timeouts to 5s,
compared to the 1s timeout for the hang, so that we preferentially
report the hang timing out, while hopefully ensuring that we do at least
wake up the hang thread first before declaring the background active
timeout.
Chris Wilson [Fri, 18 May 2018 09:02:12 +0000 (10:02 +0100)]
drm/i915: Allow init_breadcrumbs to be used from irq context
In order to support engine reset from irq (timer) context, we need to be
able to re-initialise the breadcrumbs. So we need to promote the plain
spin_lock_irq to a safe spin_lock_irqsave.
Chris Wilson [Fri, 18 May 2018 09:02:11 +0000 (10:02 +0100)]
drm/i915/execlists: Handle copying default context state for atomic reset
We want to be able to reset the GPU from inside a timer callback
(hardirq context). One step requires us to copy the default context
state over to the guilty context, which means we need to plan in advance
to have that object accessible from within an atomic context. The atomic
context prevents us from pinning the object or from peeking into the
shmemfs backing store (all may sleep), so we choose to pin the
default_state into memory when the engine becomes active. This
compromise allows us to swap out the default state when idle, when
required.
Chris Wilson [Fri, 18 May 2018 09:02:10 +0000 (10:02 +0100)]
drm/i915: Make intel_engine_dump irqsafe
To be useful later, enable intel_engine_dump() to be called from irq
context (i.e. using saving and restoring irq start rather than assuming
we enter with irqs enabled).
Chris Wilson [Sun, 6 May 2018 17:13:28 +0000 (18:13 +0100)]
drm/i915: Speed up idle detection by kicking the tasklets
We rely on ksoftirqd to run in a timely fashion in order to drain the
execlists queue. Quite frequently, it does not. In some cases we may see
latencies of over 200ms triggering our idle timeouts and forcing us to
declare the driver wedged!
Thus we can speed up idle detection by bypassing ksoftirqd in these
cases and flush our tasklet to confirm if we are indeed still waiting
for the ELSP to drain.
v2: Put the execlists.first check back; it is required for handling
reset!
References: https://bugs.freedesktop.org/show_bug.cgi?id=106373 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180506171328.30034-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 18 May 2018 07:48:40 +0000 (08:48 +0100)]
drm/i915/lvds: Move acpi lid notification registration to registration phase
Delay registering ourselves with the acpi lid notification mechanism
until we are registering the connectors after initialisation is
complete. This prevents a possibility of trying to handle the lid
notification before we are ready with the danger of chasing
uninitialised function pointers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106559 Fixes: c1c7af608920 ("drm/i915: force mode set at lid open time") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180518074840.16194-1-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org
Ville Syrjälä [Thu, 17 May 2018 17:03:07 +0000 (20:03 +0300)]
drm/i915: Check for IVB instead of gen7 when we think about IVB CPU eDP
Almost all of the GEN7 checks in the DP code are actually looking for
IVB. HSW doesn't even take these codepaths, and VLV is excluded on
account of not having port A. So let's change the checks to IS_IVB to
make the code less confusing.
Ville Syrjälä [Thu, 17 May 2018 17:03:06 +0000 (20:03 +0300)]
drm/i915: Use the same vswing->max_preemph mapping on HSW/BDW as on SKL+
All DDI platforms support the full set of preemph settings for each
supported vswing, so let's use the same code for them. We'll also move
the code into intel_ddi.c so that it sits closer to the actual buf trans
tables.
Ville Syrjälä [Thu, 17 May 2018 17:03:05 +0000 (20:03 +0300)]
drm/i915: Use intel_ddi_dp_voltage_max() for HSW/BDW too
Use intel_ddi_dp_voltage_max() for HSW/BDW too instead of letting these
fall through the if ladder in a weird way. This function will look at
the actual buf trans tables we have for HSW/BDW to determine the max
vswing level.
It looks to me like the current code leads HSW port A down the IVB port
A path, HSW port B+ and BDW fall through to the very end. Both cases do
result in the correct max vswing level 2, but it's very hard to see that
from the code.
Chris Wilson [Thu, 17 May 2018 21:26:33 +0000 (22:26 +0100)]
drm/i915: Pull the context->pin_count dec into the common intel_context_unpin
As all backends implement the same pin_count mechanism and do a
dec-and-test as their first step, pull that into the common
intel_context_unpin(). This also pulls into the caller, eliminating the
indirect call in the usual steady state case. The intel_context_pin()
side is a little more complicated as it combines the lookup/alloc as
well as pinning the state, and so is left for a later date.
Chris Wilson [Thu, 17 May 2018 21:26:32 +0000 (22:26 +0100)]
drm/i915: Store a pointer to intel_context in i915_request
To ease the frequent and ugly pointer dance of
&request->gem_context->engine[request->engine->id] during request
submission, store that pointer as request->hw_context. One major
advantage that we will exploit later is that this decouples the logical
context state from the engine itself.
v2: Set mock_context->ops so we don't crash and burn in selftests.
Cleanups from Tvrtko.
Chris Wilson [Thu, 17 May 2018 21:26:30 +0000 (22:26 +0100)]
drm/i915: Move request->ctx aside
In the next patch, we want to store the intel_context pointer inside
i915_request, as it is frequently access via a convoluted dance when
submitting the request to hw. Having two context pointers inside
i915_request leads to confusion so first rename the existing
i915_gem_context pointer to i915_request.gem_context.
Paulo Zanoni [Wed, 2 May 2018 21:58:51 +0000 (14:58 -0700)]
drm/i915: enable the pipe/transcoder/planes later on HSW+
For all platforms that run haswell_crtc_enable, our spec tells us to
configure the transcoder clocks and do link training before it tells
us to set pipeconf and the other pipe/transcoder/plane registers.
Starting from Icelake, we get machine hangs if we try to touch the
pipe/transcoder registers without having the clocks configured and not
having some chicken bits set. So this patch changes
haswell_crtc_enable() to issue the calls at the appropriate order
mandated by the spec.
While setting the appropriate chicken bits would also work here, it's
better if we actually program the hardware the way it is intended to
be programmed. And the chicken bit also has some theoretical downsides
that may or may not affect us. Also, correctly programming the
hardware does not prevent us from setting the chicken bits in a later
patch in case we decide to.
v2: Don't forget link training (Ville).
Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502215851.30736-1-paulo.r.zanoni@intel.com
Oscar Mateo [Thu, 10 May 2018 21:59:55 +0000 (14:59 -0700)]
drm/i915/icl: Read the correct Gen11 interrupt registers
Stop reading some now deprecated interrupt registers in both
debugfs and error state. Instead, read the new equivalents in the
Gen11 interrupt repartitioning scheme.
Note that the equivalent to the PM ISR & IIR cannot be read without
affecting the current state of the system, so I've opted for leaving
them out. See gen11_reset_one_iir() for more info.
v2: else if !!! (Paulo)
v3: another else if (Vinay)
v4:
- Rebased
- Renamed patch
- Improved the ordering of GENs
- Improved the printing of per-GEN info
v5: Avoid maybe-unitialized & add comment explaining the lack
of PM ISR & IIR
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e3331 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!
The HWACK bit more generically solves the problem of resubmitting ESLP
while the hardware is still processing the current ELSP write. We no
longer need to check port[0].count itself.
Ville Syrjälä [Mon, 14 May 2018 17:24:23 +0000 (20:24 +0300)]
drm/i915: Clean up DVO pipe select bits
Parametrize the DVO pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
Ville Syrjälä [Mon, 14 May 2018 17:24:22 +0000 (20:24 +0300)]
drm/i915: Clean up TV pipe select bits
Parametrize the TV pipe select bits.
For consistency with the new way of doing things, let's read out the
pipe select bits even when the port is disable, even though we don't
need that behaviour for asserts in this case.
v2: Order the defines shift,mask,value (Jani)
Clear the stale pipe select bit in load detection (Jani)
Ville Syrjälä [Mon, 14 May 2018 17:24:21 +0000 (20:24 +0300)]
drm/i915: Clean up SDVO pipe select bits
Clean up the SDVO pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
Ville Syrjälä [Mon, 14 May 2018 18:28:27 +0000 (21:28 +0300)]
drm/i915: Clean up LVDS pipe select bits
Clean up the LVDS pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
v2: Order the defines shift,mask,value (Jani)
Drop ruperfluous braces and whitesapce changes (Jani)
Combine masks in compute_is_dual_link_lvds() (Jani)
v3: Fix LVDS_PIPE_SEL_MASK_CPT
Ville Syrjälä [Mon, 14 May 2018 17:24:19 +0000 (20:24 +0300)]
drm/i915: Clean up ADPA pipe select bits
Clean up the ADPA pipe select bits. To make the whole situation a bit
less ugly we'll start to share the same code between .get_hw_state()
and the port state asserts.
Chris Wilson [Wed, 16 May 2018 18:33:55 +0000 (19:33 +0100)]
drm/i915: Stop parking the signaler around reset
We cannot call kthread_park() from softirq context, so let's avoid it
entirely during the reset. We wanted to suspend the signaler so that it
would not mark a request as complete at the same time as we marked it as
being in error. Instead of parking the signaling, stop the engine from
advancing so that the GPU doesn't emit the breadcrumb for our chosen
"guilty" request.
v2: Refactor setting STOP_RING so that we don't have the same code thrice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Michałt Winiarski <michal.winiarski@intel.com> CC: Michel Thierry <michel.thierry@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-8-chris@chris-wilson.co.uk
Chris Wilson [Wed, 16 May 2018 18:33:52 +0000 (19:33 +0100)]
drm/i915: Split execlists/guc reset preparations
In the next patch, we will make the execlists reset prepare callback
take into account preemption by flushing the context-switch handler.
This is not applicable to the GuC submission backend, so split the two
into their own backend callbacks.
Chris Wilson [Wed, 16 May 2018 18:33:51 +0000 (19:33 +0100)]
drm/i915: Move engine reset prepare/finish to backends
In preparation to more carefully handling incomplete preemption during
reset by execlists, we move the existing code wholesale to the backends
under a couple of new reset vfuncs.
Chris Wilson [Wed, 16 May 2018 18:33:50 +0000 (19:33 +0100)]
drm/i915/execlists: Refactor out complete_preempt_context()
As a complement to inject_preempt_context(), follow up with the function
to handle its completion. This will be useful should we wish to extend
the duties of the preempt-context for execlists.
Chris Wilson [Wed, 16 May 2018 18:33:49 +0000 (19:33 +0100)]
drm/i915: Only sync tasklets once for recursive reset preparation
When setting up reset, we may need to recursively prepare an engine. In
which case we should only synchronously flush the tasklets on the outer
most call, the inner calls will then be inside an atomic section where
the tasklet will never be run (and so the sync will never complete).
Chris Wilson [Wed, 16 May 2018 18:33:48 +0000 (19:33 +0100)]
drm/i915: Remove tasklet flush before disable
The idea was to try and let the existing tasklet run to completion
before we began the reset, but it involves a racy check against anything
else that tries to run the tasklet. Rather than acknowledge and ignore
the race, let it be and don't try and be too clever.
The tasklet will resume execution after reset (after spinning a bit
during reset), but before we allow it to resume we will have cleared all
the pending state.
Chris Wilson [Tue, 15 May 2018 14:31:49 +0000 (15:31 +0100)]
drm/i915: Shrink search list for active timelines
When switching to the kernel context, we force the switch to occur after
all currently active requests (so that we know the GPU won't switch
immediately away and the kernel context remains current as we work). To
do so we have to inspect all the timelines and add a fence from the
active work to queue our switch afterwards. We can use the tracked set
of active rings to shrink our search for active timelines.
v2: Use a local to shrink the list_for_each_entry()
Chris Wilson [Sat, 12 May 2018 08:49:57 +0000 (09:49 +0100)]
drm/i915: Mark up nested spinlocks
When we process the outstanding requests upon banning a context, we need
to acquire both the engine and the client's timeline, nesting the locks.
This requires explicit markup as the two timelines are now of the same
class, since commit a89d1f921c15 ("drm/i915: Split i915_gem_timeline into
individual timelines").
Testcase: igt/gem_eio/banned Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180512084957.9829-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 11 May 2018 12:11:47 +0000 (13:11 +0100)]
drm/i915/execlists: Relax CSB force-mmio for VT-d
The original switch to use CSB from the HWSP was plagued by the effect
of read ordering on VT-d; we would read the WRITE pointer from the HWSP
before it had completed writing the CSB contents. The mystery comes down
to the lack of rmb() for correct ordering with respect to the writes
from HW, and with that resolved we can remove the VT-d special casing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-3-chris@chris-wilson.co.uk Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Jani Nikula [Mon, 14 May 2018 08:18:06 +0000 (11:18 +0300)]
Merge tag 'gvt-next-2018-05-14' of https://github.com/intel/gvt-linux into drm-intel-next-queued
- Improve the emulation of virtual non-priv register. (Yan)
- Reverse the hack of host of preeption of GVT-g. (Weinan)
- Improve untracked warning message.(Changbin)
There are issues which will block the host preemption before, instead of
disabling it use one workaround "setting max priority for gvt context"
to avoid the gvt context be preempted by the host. Now the issues have been
cleared, so revert this patch to enable host preemption.
v2:
- refine description(Zhenyu)
Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Zhao Yan [Tue, 8 May 2018 06:52:50 +0000 (14:52 +0800)]
drm/i915/gvt: let force_to_nonpriv cmd handler only valid for LRI cmd
the cmd_reg_handler() is called by cmds LRM, PIPE_CTRL, SRM...
for LRM, SRM, we cannot get write data in a simple way.
On other side, the force_to_nonpriv reigsters will only be written in LRI
in current drivers. so we don't want to bother the handler to handle those
memory access cmds, just leave a print message here.
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Zhao Yan [Tue, 8 May 2018 06:52:42 +0000 (14:52 +0800)]
drm/i915/gvt: do not return error on handling force_to_nonpriv registers
Return error will cause vm hang and enter failsafe mode.
However, we don't want that happen on detecting an wrong force_to_nonpriv
register write.
Therefore, we just omit the wrong write or patch it to default value.
v2: only return 0 on detecting lri write of registers outside whitelist,
but still return error on other error conditions. (zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Reviewed-by: Zhang Yulei <yulei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Changbin Du [Thu, 19 Apr 2018 04:12:37 +0000 (12:12 +0800)]
drm/i915/gvt: Remove disable_warn_untrack and print untracked mmio with debug level
The disable_warn_untrack never prevent gvt from printing untracked
mmio errors. We were disturbed by this error storm and the fix is
just adding them to the list with no essential new change.
This message is only useful for enabling new platform during
developing process. So lower the message level to debug and then
remove disable_warn_untrack.
Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Michel Thierry [Thu, 10 May 2018 20:07:08 +0000 (13:07 -0700)]
drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
Factor in clear values wherever required while updating destination
min/max.
References: HSDES#1604444184 Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org
Matthew Auld [Fri, 11 May 2018 09:51:40 +0000 (10:51 +0100)]
drm/i915/selftests: scrub 64K
We write all 4K page entries, even when using 64K pages. In order to
verify that the HW isn't cheating by using the 4K PTE instead of the 64K
PTE, we want to remove all the surplus entries. If the HW skipped the
64K PTE, it will read/write into the scratch page instead - which we
detect as missing results during selftests.
Chris Wilson [Fri, 11 May 2018 13:52:07 +0000 (14:52 +0100)]
drm/i915/oa: Check that OA is disabled before unpinning
Before we unpin the buffer used for OA reports and return it to the
system, we need to be sure that the HW has finished writing into it.
For lack of a better idea, poll OACONTROL to check it is switched off.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 11 May 2018 12:11:46 +0000 (13:11 +0100)]
Revert "drm/i915/cnl: Use mmio access to context status buffer"
In the previous patch (to include a rmb() after readig the CSB WRITE
pointer from the HWSP) we believe we have fixed the underlying bug, and
so can re-enable using the HWSP on Cannolake.
This reverts commit 61bf9719fa17 ("drm/i915/cnl: Use mmio access to
context status buffer").
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 11 May 2018 12:11:45 +0000 (13:11 +0100)]
drm/i915/execlists: Use rmb() to order CSB reads
We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:
* (HW) (DRIVER)
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.
The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185 Fixes: 767a983ab255 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa17 ("drm/i915/cnl: Use mmio access to context status buffer") Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Acked-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
Oscar Mateo [Tue, 8 May 2018 21:29:35 +0000 (14:29 -0700)]
drm/i915/icl: WaForwardProgressSoftReset
Avoids a hang during soft reset.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Which steppings affected by this are not clear.
For the moment, apply unconditionally as per the
BSpec (Mika)
- Add reference to another HSD also related
Oscar Mateo [Tue, 8 May 2018 21:29:34 +0000 (14:29 -0700)]
drm/i915/icl: Wa_1406838659
Disable CGPSF unit clock gating to prevent an issue.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Remove unintentional whitespaces (Mika)
- Fixed in C0 (Mika)
Oscar Mateo [Tue, 8 May 2018 21:29:33 +0000 (14:29 -0700)]
drm/i915/icl: Wa_1604302699
Disable I2M Write for performance reasons.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- GEN7 chicken bit in the wrong side of the fence (Mika)
- Use two spaces to align bit macros
Oscar Mateo [Tue, 8 May 2018 21:29:32 +0000 (14:29 -0700)]
drm/i915/icl: Wa_1406680159
Disable GWL clock gating to prevent an issue that might
cause hangs.
v2: Rebased on top of the WA refactoring
v3: Wa_2201832410 officially merged with Wa_1406680159
v4: Added References (Mika)
v5:
- Rebased
- C, not lisp (Chris)
- Add reference where WA is better explained (Rodrigo)
- Add reference to WA that got merged with this
Oscar Mateo [Tue, 8 May 2018 21:29:30 +0000 (14:29 -0700)]
drm/i915/icl: WaDisCtxReload
Revert to the legacy implementation to avoid a system hang.
v2: Correct the address for GAMW_ECO_DEV_RW_IA_REG
v3: Renamed to Wa_220166154
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
Oscar Mateo [Tue, 8 May 2018 21:29:29 +0000 (14:29 -0700)]
drm/i915/icl: WaCL2SFHalfMaxAlloc
This workarounds an issue with insufficient storage for the
CL2 and SF units.
v2: Renamed to Wa_1405766107
v3: Wrapped the commit message
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- s/MACALLOC/MAXALLOC (Mika)
- C, not lisp (Chris)
Oscar Mateo [Tue, 8 May 2018 21:29:28 +0000 (14:29 -0700)]
drm/i915/icl: WaDisableCleanEvicts
Avoids an undefined LLC behavior.
BSpec: 9613
v2: Renamed to Wa_1405733216
v3: Spaces around '<<' and fix surrounding code
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
Oscar Mateo [Tue, 8 May 2018 21:29:27 +0000 (14:29 -0700)]
drm/i915/icl: WaModifyGamTlbPartitioning
Adjust default GAM TLB partitioning for performance reasons.
v2: Only touch the bits that we really need
v3: Rebased on top of the WA refactoring
v4:
- Added References (Mika)
- Rebased
v5:
- Rebased
- C, not lisp (Chris)
- Correct reference number (Mika)
Oscar Mateo [Tue, 8 May 2018 21:29:26 +0000 (14:29 -0700)]
drm/i915/icl: WaL3BankAddressHashing
Revert to an L3 non-hash model, for performance reasons.
v2:
- Place the WA name above the actual change
- Improve the register naming
v3:
- Rebased
- Renamed to Wa_1604223664
v4: Rebased on top of the WA refactoring
v5:
- Added References (Mika)
- Fixed wrong mask and value (Mika)
- Do not apply together with another WA for the same
register (not worth the hassle)
v6:
- Rebased
- C, not lisp (Chris)
Oscar Mateo [Tue, 8 May 2018 21:29:24 +0000 (14:29 -0700)]
drm/i915/icl: Enable Sampler DFR
Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler
power by dynamically changing its clock frequency in low-throughput
conditions. This patches enables it by default on Gen11.
v2: Wrong operation to clear the bit (Praveen)
v3: Rebased on top of the WA refactoring
v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo)
v5: C, not lisp (Chris)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Praveen Paneri <praveen.paneri@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com
Inherit workarounds from previous platforms that are still valid for
Icelake.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Since it has been fixed already in upstream, removed the TODO
comment about WA_SET_BIT for WaInPlaceDecompressionHang.
- Squashed with this patch:
drm/i915/icl: add icelake_init_clock_gating()
from Paulo Zanoni <paulo.r.zanoni@intel.com>
- Squashed with this patch:
drm/i915/icl: WaForceEnableNonCoherent
from Oscar Mateo <oscar.mateo@intel.com>
- WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
applies to B0 as well.
- WaPipeControlBefore3DStateSamplePattern WABB was being applied
to ICL incorrectly.
v4:
- Wrap the commit message
- s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
- C, not lisp (Chris)
- WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
Mika Kuoppala [Tue, 8 May 2018 12:41:54 +0000 (15:41 +0300)]
drm/i915/gtt: Trust the uncached store to flush wcb
Not all architectures guarantee that uncached read will
flush the write combining buffer. So marking it explicitly
is recommended [1].
However we know the architecture we are operating on
and can avoid wmb as the UC store will flush the wcb [2].
Omit the wmb() before invalidate as redudant.
v2: squash combining and removal (Chris)
v3: remove obsolete comments about posting reads (Chris)
References: http://yarchive.net/comp/linux/write_combining.html [1]
References: http://download.intel.com/design/PentiumII/applnots/24442201.pdf [2] Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180508124154.14586-1-mika.kuoppala@linux.intel.com
Chandra Konduru [Fri, 11 May 2018 21:33:17 +0000 (03:03 +0530)]
drm/i915: Add NV12 as supported format for sprite plane
This patch adds NV12 to list of supported formats for sprite plane.
v2: Rebased (me)
v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added
NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats
v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats
by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series
for SKL.
v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B
v7: Rebased (me)
v8: Rebased (me)
Restricting NV12 changes to BXT and KBL
Restricting NV12 changes for plane 0 (overlay)
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 to skl_plane_formats itself.
v11: Addressed review comments from Shashank Sharma
v12: Addressed review comments from Shashank Sharma
Made the condition in intel_sprite_plane_create
simple and easy to read as suggested.
v13: Adding reviewed by tag from Shashank Sharma
Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Ville
Added skl_planar_formats to include NV12
and a check skl_plane_has_planar in sprite create
Added NV12 format to skl_mod_supported. These were
review comments from Kristian Høgsberg <hoegsberg@gmail.com>
v15: Added reviewed by from Juha-Pekka Heikkila
v16: Rebased the series
v17: Added all tiling under mod supported for NV12
Credits to Megha Aggarwal
v18: Added RB by Maarten and Kristian
v19: Addressed review comments from Maarten
Made modification to skl_mod_supported
Credits-to: Megha Aggarwal <megha.aggarwal@intel.com> Credits-to: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com
v12: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v13: Addressed review comments from Ville
Added skl_pri_planar_formats to include NV12
and skl_plane_has_planar function to check for
NV12 support on plane. Added NV12 format to
skl_mod_supported. These were review comments
from Kristian Høgsberg <hoegsberg@gmail.com>
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
v16: Added all tiling support under mod supported
for NV12. Credits to Megha Aggarwal
v17: Added RB by Maarten and Kristian
v18: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
v19: Addressed review comments from Maarten
Make changes to skl_mod_supported
Credits-to: Megha Aggarwal megha.aggarwal@intel.com Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com
Chandra Konduru [Fri, 11 May 2018 21:33:15 +0000 (03:03 +0530)]
drm/i915: Add NV12 support to intel_framebuffer_init
This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.
v2:
-Fix an issue in checks added (Chandra Konduru)
v3: rebased (me)
v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init
Removed offset checks for NV12 case
v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms
causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to
SKL and BXT only.
v6: Rebased (me)
v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.
v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.
v9: Rebased (me)
v10: NV12 supported by all GEN >= 9.
Making this change in intel_framebuffer_init. This is
part of addressing Maarten's review comments.
Comment under v8 no longer applicable
v11: Addressed review comments from Shashank Sharma
v12: Adding Reviewed By from Shashank Sharma
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Maarten.
Add checks for fb width height for NV12 and fail the fb
creation if check fails. Added reviewed by from
Juha-Pekka Heikkila
v15: Rebased the series
v16: Setting the minimum value during fb creating to 16
as per Bspec for NV12. Earlier minimum was expected
to be > 16. Now changed it to >=16.
v17: Adding restriction to framebuffer_init - the fb
width and height should be a multiplier of 4
v18: Added RB from Maarten. Included Maarten's review comments
Dont allow CCS formats for fb creation of NV12
v19: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.
v2: For NV12, making the src coordinates multiplier of 4
v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface
v4: Added RB from Mika
v5: Rebased the series. Removed checks of mult of 4 in
skl_update_scaler, Added NV12 condition in intel_check_sprite_plane
where src x/w is being checked for mult of 2 for yuv planes.
v6: Made changes to skl_check_nv12_surface as per WA#1106
Vidya Srinivas [Fri, 11 May 2018 21:33:13 +0000 (03:03 +0530)]
drm/i915: Enable Display WA 0528
Possible hang with NV12 plane surface formats.
WA: When the plane source pixel format is NV12,
the CHICKEN_PIPESL_* register bit 22 must be set to 1
and the render decompression must not be enabled
on any of the planes in that pipe.
drm/i915: Enable display workaround 827 for all planes, v2.
The workaround was applied only to the primary plane, but is required
on all planes. Iterate over all planes in the crtc atomic check to see
if the workaround is enabled, and only perform the actual toggling in
the pre/post plane update functions.
Changes since v1:
- Track active NV12 planes in a nv12_planes bitmask. (Ville)
v2: Removing BROXTON support for NV12 due to WA826
drm/i915/psr: Check if VBT says PSR can be enabled.
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.
Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.
Chris Wilson [Tue, 8 May 2018 21:03:18 +0000 (22:03 +0100)]
drm/i915/guc: Make submission tasklet hardirq safe
Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Chris Wilson [Tue, 8 May 2018 21:03:17 +0000 (22:03 +0100)]
drm/i915/execlists: Make submission tasklet hardirq safe
Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Chris Wilson [Tue, 8 May 2018 21:10:56 +0000 (22:10 +0100)]
drm/i915/selftests: Create mock_engine() under struct_mutex
Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c15 ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.
Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
but did not report it as an issue as it only occurred during the first
module on boot. This is due to the removal of the distinct global
timeline, and its separate lock class. So instead mark up the expected
nesting. An alternative would be to define a separate lock class for the
engine, but since we only expect to have a single point of nesting, we
can avoid having multiple lock classes for the struct.
Fixes: a89d1f921c15 ("drm/i915: Split i915_gem_timeline into individual timelines") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Tested-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508153514.20251-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 8 May 2018 15:15:52 +0000 (16:15 +0100)]
drm/i915: Remove unused i915_flip tracepoints
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911d7 ("drm/i915: Remove intel_flip_work
infrastructure")
References: 8b5d27b911d7 ("drm/i915: Remove intel_flip_work infrastructure") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 7 May 2018 13:57:26 +0000 (14:57 +0100)]
drm/i915: Disable tasklet scheduling across initial scheduling
During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.
v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().
Chris Wilson [Mon, 7 May 2018 13:57:25 +0000 (14:57 +0100)]
drm/i915: Flush submission tasklet after bumping priority
When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.
Chris Wilson [Tue, 8 May 2018 11:53:12 +0000 (12:53 +0100)]
drm/i915/selftests: Return to kernel context after each test
As we flush each test and wait for idle before the next, also switch
back to the kernel context. This helps limit the amount of collateral
damage a test may cause by resetting to the default state each time (and
also helps clean up temporaries used by the test).
Matthew Auld [Thu, 1 Mar 2018 11:46:39 +0000 (11:46 +0000)]
drm/i915: don't leak the pin_map on error
Add some onion to populate_lr_context.
v2: prefer err_unpin_ctx
drop the fixes tag, worst case we just spew a warn before everything
is cleaned up and balance is restored
Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180301114639.510-1-matthew.auld@intel.com
Chris Wilson [Sat, 5 May 2018 09:10:14 +0000 (10:10 +0100)]
drm/i915/selftests: Flush GPU activity before completing live_contexts
igt_ctx_exec() expects that we retire all active requests/objects before
completing, so that when we clean up the files afterwards they are ready
to be freed. Before we do so, it is then prudent to ensure that we have
indeed retired the GPU activity, raising an error if it fails. If we do
not, we run the risk of triggering an assertion when freeing the object:
Matthew Auld [Wed, 2 May 2018 19:50:21 +0000 (20:50 +0100)]
drm/i915/userptr: reject zero user_size
Operating on a zero sized GEM userptr object will lead to explosions.
Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
Chris Wilson [Tue, 8 May 2018 00:30:46 +0000 (01:30 +0100)]
drm/i915/execlists: Cache the priolist when rescheduling
When rescheduling a change of dependencies, they all need to be added to
the same priolist (at least the ones on the same engine!). Since we
likely want to move a batch of requests, keep the priolist around.
v2: Throw in an assert to catch trivial errors quickly.
Chris Wilson [Tue, 8 May 2018 00:30:45 +0000 (01:30 +0100)]
drm/i915/execlists: Drop unused parameter to lookup_priolist()
lookup_priolist() no longer attaches the request into the priolist, it
just returns the priolist for the given priority instead. Drop the
unused parameter.
Chris Wilson [Sun, 6 May 2018 18:31:47 +0000 (19:31 +0100)]
drm/i915: Don't request a bug report for unsafe module parameters
Unsafe module parameters are just that, unsafe. If the user is foolish
enough to try them and the kernel breaks, they get to keep both pieces.
Don't ask them to file a bug report if they broke it themselves.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106423 Fixes: d15d7538c6d2 ("drm/i915: Tune down init error message due to failure injection") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180506183147.2690-1-chris@chris-wilson.co.uk
Paulo Zanoni [Wed, 28 Mar 2018 21:58:01 +0000 (14:58 -0700)]
drm/i915/icl: compute the MG PLL registers
This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.
I recommend grabbing some coffee, a pen and paper before reviewing
this patch.
v2:
- Correctly identify DP encoders after upstream change.
- Small checkpatch issues.
- Rebase.
v3:
- Try to impove the comment on the tdc_targetcnt calculation based on
Manasi's feedback (Manasi).
- Rebase.
Paulo Zanoni [Wed, 28 Mar 2018 21:57:59 +0000 (14:57 -0700)]
drm/i915/icl: compute the combo PHY (DPLL) HDMI registers
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.
v2:
- Properly detect HDMI crtcs.
- Rebase after changes to the cnl function (clock * 1000).
v3:
- Add a comment to clarify why we treat 38.4 as 19.2 (James).
Paulo Zanoni [Fri, 27 Apr 2018 23:14:36 +0000 (16:14 -0700)]
drm/i915/icl: add basic support for the ICL clocks
This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.
Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.
v2:
- Rebase around dpll_lock changes.
v3:
- The spec now says what the timeouts should be.
- Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
the machine.
- Checkpatch found a white space problem.
- Small adjustments before upstreaming.
v4:
- Move the ICL checks out of the *map_plls_to_ports() functions
(James)
- Add extra encoder check (James)
- Call icl_unmap_plls_to_ports() later (James)
v5:
- Rebase after the pll struct changes.
v6:
- Properly make the unmap function based on encoders_post_disable()
with regarding to checks and iterators.
- Address checkpatch comment on "min = max = x()".
projects / mirror_ubuntu-eoan-kernel.git / log