Jose Abreu [Fri, 13 Oct 2017 09:58:36 +0000 (10:58 +0100)]
net: stmmac: Use correct values in TQS/RQS fields
Currently we are using all the available fifo size in RQS and
TQS fields. This will not work correctly in multi-queues IP's
because total fifo size must be splitted to the enabled queues.
Correct this by computing the available fifo size per queue and
setting the right value in TQS and RQS fields.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Thu, 12 Oct 2017 14:12:37 +0000 (16:12 +0200)]
icmp: don't fail on fragment reassembly time exceeded
The ICMP implementation currently replies to an ICMP time exceeded message
(type 11) with an ICMP host unreachable message (type 3, code 1).
However, time exceeded messages can either represent "time to live exceeded
in transit" (code 0) or "fragment reassembly time exceeded" (code 1).
Unconditionally replying to "fragment reassembly time exceeded" with
host unreachable messages might cause unjustified connection resets
which are now easily triggered as UFO has been removed, because, in turn,
sending large buffers triggers IP fragmentation.
The issue can be easily reproduced by running a lot of UDP streams
which is likely to trigger IP fragmentation:
# start netserver in the test namespace
ip netns add test
ip netns exec test netserver
# create a VETH pair
ip link add name veth0 type veth peer name veth0 netns test
ip link set veth0 up
ip -n test link set veth0 up
for i in $(seq 20 29); do
# assign addresses to both ends
ip addr add dev veth0 192.168.$i.1/24
ip -n test addr add dev veth0 192.168.$i.2/24
# wait
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
We need to differentiate instead: if fragment reassembly time exceeded
is reported, we need to silently drop the packet,
if time to live exceeded is reported, maintain the current behaviour.
In both cases increment the related error count "icmpInTimeExcds".
While at it, fix a typo in a comment, and convert the if statement
into a switch to mate it more readable.
Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Oct 2017 15:46:01 +0000 (08:46 -0700)]
Merge branch 'tipc-comm-groups'
Jon Maloy says:
====================
tipc: Introduce Communcation Group feature
With this commit series we introduce a 'Group Communication' feature in
order to resolve the datagram and multicast flow control problem. This
new feature makes it possible for a user to instantiate multiple private
virtual brokerless message buses by just creating and joining member
sockets.
The main features are as follows:
---------------------------------
- Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN.
If it is the first socket of the group this implies creation of the
group. This call takes four parameters: 'type' serves as group
identifier, 'instance' serves as member identifier, and 'scope'
indicates the visibility of the group (node/cluster/zone). Finally,
'flags' indicates different options for the socket joining the group.
For the time being, there are only two such flags: 1) 'LOOPBACK'
indicates if the creator of the socket wants to receive a copy of
broadcast or multicast messages it sends to the group, 2) EVENTS
indicates if it wants to receive membership (JOINED/LEFT) events for
the other members of the group.
- Groups are closed, i.e., sockets which have not joined a group will
not be able to send messages to or receive messages from members of
the group, and vice versa. A socket can only be member of one group
at a time.
- There are four transmission modes.
1: Unicast. The sender transmits a message using the port identity
(node:port tuple) of the receiving socket.
2: Anycast. The sender transmits a message using a port name (type:
instance:scope) of one of the receiving sockets. If more than
one member socket matches the given address a destination is
selected according to a round-robin algorithm, but also considering
the destination load (advertised window size) as an additional
criteria.
3: Multicast. The sender transmits a message using a port name
(type:instance:scope) of one or more of the receiving sockets.
All sockets in the group matching the given address will receive
a copy of the message.
4: Broadcast. The sender transmits a message using the primtive
send(). All members of the group, irrespective of their member
identity (instance) number receive a copy of the message.
- TIPC broadcast is used for carrying messages in mode 3 or 4 when
this is deemed more efficient, i.e., depending on number of actual
destinations.
- All transmission modes are flow controlled, so that messages never
are dropped or rejected, just like we are used to from connection
oriented communication. A special algorithm guarantees that this is
true even for multipoint-to-point communication, i.e., at occasions
where many source sockets may decide to send simultaneously towards
the same destination socket.
- Sequence order is always guaranteed, even between the different
transmission modes.
- Member join/leave events are received in all other member sockets
in guaranteed order. I.e., a 'JOINED' (an empty message with the OOB
bit set) will always be received before the first data message from
a new member, and a 'LEAVE' (like 'JOINED', but with EOR bit set) will
always arrive after the last data message from a leaving member.
-----
v2: Reordered variable declarations in descending length order, as per
feedback from David Miller. This was done as far as permitted by the
the initialization order.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:34 +0000 (11:04 +0200)]
tipc: add multipoint-to-point flow control
We already have point-to-multipoint flow control within a group. But
we even need the opposite; -a scheme which can handle that potentially
hundreds of sources may try to send messages to the same destination
simultaneously without causing buffer overflow at the recipient. This
commit adds such a mechanism.
The algorithm works as follows:
- When a member detects a new, joining member, it initially set its
state to JOINED and advertises a minimum window to the new member.
This window is chosen so that the new member can send exactly one
maximum sized message, or several smaller ones, to the recipient
before it must stop and wait for an additional advertisement. This
minimum window ADV_IDLE is set to 65 1kB blocks.
- When a member receives the first data message from a JOINED member,
it changes the state of the latter to ACTIVE, and advertises a larger
window ADV_ACTIVE = 12 x ADV_IDLE blocks to the sender, so it can
continue sending with minimal disturbances to the data flow.
- The active members are kept in a dedicated linked list. Each time a
message is received from an active member, it will be moved to the
tail of that list. This way, we keep a record of which members have
been most (tail) and least (head) recently active.
- There is a maximum number (16) of permitted simultaneous active
senders per receiver. When this limit is reached, the receiver will
not advertise anything immediately to a new sender, but instead put
it in a PENDING state, and add it to a corresponding queue. At the
same time, it will pick the least recently active member, send it an
advertisement RECLAIM message, and set this member to state
RECLAIMING.
- The reclaimee member has to respond with a REMIT message, meaning that
it goes back to a send window of ADV_IDLE, and returns its unused
advertised blocks beyond that value to the reclaiming member.
- When the reclaiming member receives the REMIT message, it unlinks
the reclaimee from its active list, resets its state to JOINED, and
notes that it is now back at ADV_IDLE advertised blocks to that
member. If there are still unread data messages sent out by
reclaimee before the REMIT, the member goes into an intermediate
state REMITTED, where it stays until the said messages have been
consumed.
- The returned advertised blocks can now be re-advertised to the
pending member, which is now set to state ACTIVE and added to
the active member list.
- To be proactive, i.e., to minimize the risk that any member will
end up in the pending queue, we start reclaiming resources already
when the number of active members exceeds 3/4 of the permitted
maximum.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:33 +0000 (11:04 +0200)]
tipc: guarantee delivery of last broadcast before DOWN event
The following scenario is possible:
- A user sends a broadcast message, and thereafter immediately leaves
the group.
- The LEAVE message, following a different path than the broadcast,
arrives ahead of the broadcast, and the sending member is removed
from the receiver's list.
- The broadcast message arrives, but is dropped because the sender
now is unknown to the receipient.
We fix this by sequence numbering membership events, just like ordinary
unicast messages. Currently, when a JOIN is sent to a peer, it contains
a synchronization point, - the sequence number of the next sent
broadcast, in order to give the receiver a start synchronization point.
We now let even LEAVE messages contain such an "end synchronization"
point, so that the recipient can delay the removal of the sending member
until it knows that all messages have been received.
The received synchronization points are added as sequence numbers to the
generated membership events, making it possible to handle them almost
the same way as regular unicasts in the receiving filter function. In
particular, a DOWN event with a too high sequence number will be kept
in the reordering queue until the missing broadcast(s) arrive and have
been delivered.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:32 +0000 (11:04 +0200)]
tipc: guarantee delivery of UP event before first broadcast
The following scenario is possible:
- A user joins a group, and immediately sends out a broadcast message
to its members.
- The broadcast message, following a different data path than the
initial JOIN message sent out during the joining procedure, arrives
to a receiver before the latter..
- The receiver drops the message, since it is not ready to accept any
messages until the JOIN has arrived.
We avoid this by treating group protocol JOIN messages like unicast
messages.
- We let them pass through the recipient's multicast input queue, just
like ordinary unicasts.
- We force the first following broadacst to be sent as replicated
unicast and being acknowledged by the recipient before accepting
any more broadcast transmissions.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:31 +0000 (11:04 +0200)]
tipc: guarantee that group broadcast doesn't bypass group unicast
We need a mechanism guaranteeing that group unicasts sent out from a
socket are not bypassed by later sent broadcasts from the same socket.
We do this as follows:
- Each time a unicast is sent, we set a the broadcast method for the
socket to "replicast" and "mandatory". This forces the first
subsequent broadcast message to follow the same network and data path
as the preceding unicast to a destination, hence preventing it from
overtaking the latter.
- In order to make the 'same data path' statement above true, we let
group unicasts pass through the multicast link input queue, instead
of as previously through the unicast link input queue.
- In the first broadcast following a unicast, we set a new header flag,
requiring all recipients to immediately acknowledge its reception.
- During the period before all the expected acknowledges are received,
the socket refuses to accept any more broadcast attempts, i.e., by
blocking or returning EAGAIN. This period should typically not be
longer than a few microseconds.
- When all acknowledges have been received, the sending socket will
open up for subsequent broadcasts, this time giving the link layer
freedom to itself select the best transmission method.
- The forced and/or abrupt transmission method changes described above
may lead to broadcasts arriving out of order to the recipients. We
remedy this by introducing code that checks and if necessary
re-orders such messages at the receiving end.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:30 +0000 (11:04 +0200)]
tipc: guarantee group unicast doesn't bypass group broadcast
Group unicast messages don't follow the same path as broadcast messages,
and there is a high risk that unicasts sent from a socket might bypass
previously sent broadcasts from the same socket.
We fix this by letting all unicast messages carry the sequence number of
the next sent broadcast from the same node, but without updating this
number at the receiver. This way, a receiver can check and if necessary
re-order such messages before they are added to the socket receive buffer.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:29 +0000 (11:04 +0200)]
tipc: introduce group multicast messaging
The previously introduced message transport to all group members is
based on the tipc multicast service, but is logically a broadcast
service within the group, and that is what we call it.
We now add functionality for sending messages to all group members
having a certain identity. Correspondingly, we call this feature 'group
multicast'. The service is using unicast when only one destination is
found, otherwise it will use the bearer broadcast service to transfer
the messages. In the latter case, the receiving members filter arriving
messages by looking at the intended destination instance. If there is
no match, the message will be dropped, while still being considered
received and read as seen by the flow control mechanism.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:28 +0000 (11:04 +0200)]
tipc: introduce group anycast messaging
In this commit, we make it possible to send connectionless unicast
messages to any member corresponding to the given member identity,
when there is more than one such member. The sender must use a
TIPC_ADDR_NAME address to achieve this effect.
We also perform load balancing between the destinations, i.e., we
primarily select one which has advertised sufficient send window
to not cause a block/EAGAIN delay, if any. This mechanism is
overlayed on the always present round-robin selection.
Anycast messages are subject to the same start synchronization
and flow control mechanism as group broadcast messages.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:27 +0000 (11:04 +0200)]
tipc: introduce group unicast messaging
We now make it possible to send connectionless unicast messages
within a communication group. To send a message, the sender can use
either a direct port address, aka port identity, or an indirect port
name to be looked up.
This type of messages are subject to the same start synchronization
and flow control mechanism as group broadcast messages.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:26 +0000 (11:04 +0200)]
tipc: introduce flow control for group broadcast messages
We introduce an end-to-end flow control mechanism for group broadcast
messages. This ensures that no messages are ever lost because of
destination receive buffer overflow, with minimal impact on performance.
For now, the algorithm is based on the assumption that there is only one
active transmitter at any moment in time.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:25 +0000 (11:04 +0200)]
tipc: receive group membership events via member socket
Like with any other service, group members' availability can be
subscribed for by connecting to be topology server. However, because
the events arrive via a different socket than the member socket, there
is a real risk that membership events my arrive out of synch with the
actual JOIN/LEAVE action. I.e., it is possible to receive the first
messages from a new member before the corresponding JOIN event arrives,
just as it is possible to receive the last messages from a leaving
member after the LEAVE event has already been received.
Since each member socket is internally also subscribing for membership
events, we now fix this problem by passing those events on to the user
via the member socket. We leverage the already present member synch-
ronization protocol to guarantee correct message/event order. An event
is delivered to the user as an empty message where the two source
addresses identify the new/lost member. Furthermore, we set the MSG_OOB
bit in the message flags to mark it as an event. If the event is an
indication about a member loss we also set the MSG_EOR bit, so it can
be distinguished from a member addition event.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:24 +0000 (11:04 +0200)]
tipc: add second source address to recvmsg()/recvfrom()
With group communication, it becomes important for a message receiver to
identify not only from which socket (identfied by a node:port tuple) the
message was sent, but also the logical identity (type:instance) of the
sending member.
We fix this by adding a second instance of struct sockaddr_tipc to the
source address area when a message is read. The extra address struct
is filled in with data found in the received message header (type,) and
in the local member representation struct (instance.)
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:23 +0000 (11:04 +0200)]
tipc: introduce communication groups
As a preparation for introducing flow control for multicast and datagram
messaging we need a more strictly defined framework than we have now. A
socket must be able keep track of exactly how many and which other
sockets it is allowed to communicate with at any moment, and keep the
necessary state for those.
We therefore introduce a new concept we have named Communication Group.
Sockets can join a group via a new setsockopt() call TIPC_GROUP_JOIN.
The call takes four parameters: 'type' serves as group identifier,
'instance' serves as an logical member identifier, and 'scope' indicates
the visibility of the group (node/cluster/zone). Finally, 'flags' makes
it possible to set certain properties for the member. For now, there is
only one flag, indicating if the creator of the socket wants to receive
a copy of broadcast or multicast messages it is sending via the socket,
and if wants to be eligible as destination for its own anycasts.
A group is closed, i.e., sockets which have not joined a group will
not be able to send messages to or receive messages from members of
the group, and vice versa.
Any member of a group can send multicast ('group broadcast') messages
to all group members, optionally including itself, using the primitive
send(). The messages are received via the recvmsg() primitive. A socket
can only be member of one group at a time.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:22 +0000 (11:04 +0200)]
tipc: improve destination linked list
We often see a need for a linked list of destination identities,
sometimes containing a port number, sometimes a node identity, and
sometimes both. The currently defined struct u32_list is not generic
enough to cover all cases, so we extend it to contain two u32 integers
and rename it to struct tipc_dest_list.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:21 +0000 (11:04 +0200)]
tipc: add new function for sending multiple small messages
We see an increasing need to send multiple single-buffer messages
of TIPC_SYSTEM_IMPORTANCE to different individual destination nodes.
Instead of looping over the send queue and sending each buffer
individually, as we do now, we add a new help function
tipc_node_distr_xmit() to do this.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:20 +0000 (11:04 +0200)]
tipc: refactor function filter_rcv()
In the following commits we will need to handle multiple incoming and
rejected/returned buffers in the function socket.c::filter_rcv().
As a preparation for this, we generalize the function by handling
buffer queues instead of individual buffers. We also introduce a
help function tipc_skb_reject(), and rename filter_rcv() to
tipc_sk_filter_rcv() in line with other functions in socket.c.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:19 +0000 (11:04 +0200)]
tipc: add ability to obtain node availability status from other files
In the coming commits, functions at the socket level will need the
ability to read the availability status of a given node. We therefore
introduce a new function for this purpose, while renaming the existing
static function currently having the wanted name.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:18 +0000 (11:04 +0200)]
tipc: improve address sanity check in tipc_connect()
The address given to tipc_connect() is not completely sanity checked,
under the assumption that this will be done later in the function
__tipc_sendmsg() when the address is used there.
However, the latter functon will in the next commits serve as caller
to several other send functions, so we want to move the corresponding
sanity check there to the beginning of that function, before we possibly
need to grab the address stored by tipc_connect(). We must therefore
be able to trust that this address already has been thoroughly checked.
We do this in this commit.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Fri, 13 Oct 2017 09:04:17 +0000 (11:04 +0200)]
tipc: add ability to order and receive topology events in driver
As preparation for introducing communication groups, we add the ability
to issue topology subscriptions and receive topology events from kernel
space. This will make it possible for group member sockets to keep track
of other group members.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The module clock is used for two purposes:
- Wake-on-LAN (WoL), which is optional,
- gPTP Timer Increment (GTI) configuration, which is mandatory.
As the clock is needed for GTI configuration anyway, WoL is always
available. Hence remove duplication and repeated obtaining of the clock
by making GTI use the stored clock for WoL use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: support bgmac with B50212E B1 PHY
I got a report that a board with BCM47189 SoC and B50212E B1 PHY doesn't
work well some devices as there is massive ping loss. After analyzing
PHY state it has appeared that is runs in slave mode and doesn't auto
switch to master properly when needed.
This patchset fixes this by:
1) Adding new flag support to the PHY driver for setting master mode
2) Modifying bgmac to request master mode for reported hardware
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 12 Oct 2017 08:21:26 +0000 (10:21 +0200)]
net: bgmac: enable master mode for BCM54210E and B50212E PHYs
There are 4 very similar PHYs:
0x600d84a1: BCM54210E (rev B0)
0x600d84a2: BCM54210E (rev B1)
0x600d84a5: B50212E (rev B0)
0x600d84a6: B50212E (rev B1)
that need setting master mode manually. It's because they run in slave
mode by default with Automatic Slave/Master configuration disabled which
can lead to unreliable connection with massive ping loss.
So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY
connected to the bgmac supported ethernet device. Telling PHY driver to
setup PHY properly solves this issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Rafał Miłecki [Thu, 12 Oct 2017 08:21:25 +0000 (10:21 +0200)]
net: phy: broadcom: support new device flag for setting master mode
Some of Broadcom's PHYs run by default in slave mode with Automatic
Slave/Master configuration disabled. It stops them from working properly
with some devices.
So far it has been verified for BCM54210E and BCM50212E which don't
work well with Intel's I217-LM and I218-LM:
http://ark.intel.com/products/60019/Intel-Ethernet-Connection-I217-LM
http://ark.intel.com/products/71307/Intel-Ethernet-Connection-I218-LM
I was told there is massive ping loss.
This commit adds support for a new flag which can be set by an ethernet
driver to fixup PHY setup.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar [Thu, 12 Oct 2017 00:16:26 +0000 (17:16 -0700)]
ipvlan: always use the current L2 addr of the master
If the underlying master ever changes its L2 (e.g. bonding device),
then make sure that the IPvlan slaves always emit packets with the
current L2 of the master instead of the stale mac addr which was
copied during the device creation. The problem can be seen with
following script -
#!/bin/bash
# Create a vEth pair
ip link add dev veth0 type veth peer name veth1
ip link set veth0 up
ip link set veth1 up
ip link show veth0
ip link show veth1
# Create an IPvlan device on one end of this vEth pair.
ip link add link veth0 dev ipvl0 type ipvlan mode l2
ip link show ipvl0
# Change the mac-address of the vEth master.
ip link set veth0 address 02:11:22:33:44:55
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Oct 2017 05:23:03 +0000 (22:23 -0700)]
Merge branch 'act-ife-misc'
Alexander Aring says:
====================
sched: act: ife: UAPI checks and performance tweaks
this patch series contains at first a patch which adds a check for
IFE_ENCODE and IFE_DECODE when a ife act gets created or updated and adding
handling of these cases only inside the act callback only.
The second patch use per-cpu counters and move the spinlock around so that
the spinlock is less being held in act callback.
The last patch use rcu for update parameters and also move the spinlock for
the same purpose as in patch 2.
Notes:
- There is still a spinlock around for protecting the metalist and a
rw-lock for another list. Should be migrated to a rcu list, ife
possible.
- I use still dereference in dump callback, so I think what I didn't
got was what happened when rcu_assign_pointer will do when rcu read
lock is held. I suppose the pointer will be updated, then we don't
have any issue here.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Wed, 11 Oct 2017 21:16:07 +0000 (17:16 -0400)]
sched: act: ife: migrate to use per-cpu counters
This patch migrates the current counter handling which is protected by a
spinlock to a per-cpu counter handling. This reduce the time where the
spinlock is being held.
Signed-off-by: Alexander Aring <aring@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Wed, 11 Oct 2017 21:16:06 +0000 (17:16 -0400)]
sched: act: ife: move encode/decode check to init
This patch adds the check of the two possible ife handlings encode
and decode to the init callback. The decode value is for usability
aspect and used in userspace code only. The current code offers encode
else decode only. This patch avoids any other option than this.
Signed-off-by: Alexander Aring <aring@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Wed, 11 Oct 2017 14:50:30 +0000 (10:50 -0400)]
net sched actions: fix module auto-loading
Macro __stringify_1() can stringify a macro argument, however IFE_META_*
are enums, so they never expand, however request_module expects an integer
in IFE module name, so as a result it always fails to auto-load.
Fixes: ef6980b6becb ("introduce IFE action") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Mashak [Wed, 11 Oct 2017 14:50:29 +0000 (10:50 -0400)]
net sched actions: change IFE modules alias names
Make style of module alias name consistent with other subsystems in kernel,
for example net devices.
Fixes: 084e2f6566d2 ("Support to encoding decoding skb mark on IFE action") Fixes: 200e10f46936 ("Support to encoding decoding skb prio on IFE action") Fixes: 408fbc22ef1e ("net sched ife action: Introduce skb tcindex metadata encap decap") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 11 Oct 2017 13:55:31 +0000 (15:55 +0200)]
ip_tunnel: fix building with NET_IP_TUNNEL=m
When af_mpls is built-in but the tunnel support is a module,
we get a link failure:
net/mpls/af_mpls.o: In function `mpls_init':
af_mpls.c:(.init.text+0xdc): undefined reference to `ip_tunnel_encap_add_ops'
This adds a Kconfig statement to prevent the broken
configuration and force mpls to be a module as well in
this case.
Fixes: bdc476413dcd ("ip_tunnel: add mpls over gre support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Amine Kherbouche <amine.kherbouche@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 11 Oct 2017 11:47:23 +0000 (13:47 +0200)]
net/smc: dev_put for netdev after usage of ib_query_gid()
For RoCEs ib_query_gid() takes a reference count on the net_device.
This reference count must be decreased by the caller.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Wed, 11 Oct 2017 11:47:22 +0000 (13:47 +0200)]
net/smc: replace function pointer get_netdev()
SMC should not open code the function pointer get_netdev of the
IB device. Replacing ib_query_gid(..., NULL) with
ib_query_gid(..., gid_attr) allows access to the netdev.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Suggested-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Oct 2017 19:10:02 +0000 (12:10 -0700)]
Merge branch 'dsa-ACB-for-bcm_sf2-and-bcmsysport'
Florian Fainelli says:
====================
Enable ACB for bcm_sf2 and bcmsysport
This patch series enables Broadcom's Advanced Congestion Buffering mechanism
which requires cooperation between the CPU/Management Ethernet MAC controller
and the switch.
I took the notifier approach because ultimately the information we need to
carry to the master network device is DSA specific and I saw little room for
generalizing beyond what DSA requires. Chances are that this is highly specific
to the Broadcom HW as I don't know of any HW out there that supports something
nearly similar for similar or identical needs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 11 Oct 2017 17:57:52 +0000 (10:57 -0700)]
net: systemport: Turn on ACB at the SYSTEMPORT level
Now that we have established the queue mapping between the switch port
egress queues and the SYSTEMPORT egress queues, we can turn on Advanced
Congestion Buffering (ACB) at the SYSTEMPORT level. This enables the
Ethernet MAC controller to get out of band flow control information
directly from the switch port and queue that it monitors such that its
internal TDMA can be appropriately backpressured.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 11 Oct 2017 17:57:51 +0000 (10:57 -0700)]
net: dsa: bcm_sf2: Turn on ACB at the switch level
Turn on the out of band Advanced Congestion Buffering (ACB) mechanism at
the switch level now that we have properly established the queue mapping
between the switch egress queues and the SYSTEMPORT egress queues. This
allows the switch to correctly backpressure the host system when one of
its queue drops below the configured thresholds.
This is also helping achieve so called "lossless" behavior by adapting
the TX interrupt pacing to the actual speed and capacity of the switch
port.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Establish a queue mapping between the DSA slave network device queues
created that correspond to switch port queues, and the transmit queue
that SYSTEMPORT manages.
We need to configure the SYSTEMPORT transmit queue with the switch port number
and switch port queue number in order for the switch and SYSTEMPORT hardware to
utilize the out of band congestion notification. This hardware mechanism works
by looking at the switch port egress queue and determines whether there is
enough buffers for this queue, with that class of service for a successful
transmission and if not, backpressures the SYSTEMPORT queue that is being used.
For this to work, we implement a notifier which looks at the
DSA_PORT_REGISTER event. When DSA network devices are registered, the
framework calls the DSA notifiers when that happens, extracts the number
of queues for these devices and their associated port number, remembers
that in the driver private structure and linearly maps those queues to
TX rings/queues that we manage.
This scheme works because DSA slave network deviecs always transmit
through SYSTEMPORT so when DSA slave network devices are
destroyed/brought down, the corresponding SYSTEMPORT queues are no
longer used. Also, by design of the DSA framework, the master network
device (SYSTEMPORT) is registered first.
For faster lookups we use an array of up to DSA_MAX_PORTS * number of
queues per port, and then map pointers to bcm_sysport_tx_ring such that
our ndo_select_queue() implementation can just index into that array to
locate the corresponding ring index.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 11 Oct 2017 17:57:49 +0000 (10:57 -0700)]
net: dsa: tag_brcm: Indicate to master netdevice port + queue
We need to tell the DSA master network device doing the actual
transmission what the desired switch port and queue number is for it to
resolve that to the internal transmit queue it is mapped to.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 11 Oct 2017 17:57:48 +0000 (10:57 -0700)]
net: dsa: Add support for DSA specific notifiers
In preparation for communicating a given DSA network device's port
number and switch index, create a specialized DSA notifier and two
events: DSA_PORT_REGISTER and DSA_PORT_UNREGISTER that communicate: the
slave network device (slave_dev), port number and switch number in the
tree.
This will be later used for network device drivers like bcmsysport which
needs to cooperate with its DSA network devices to set-up queue mapping
and scheduling.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that memory allocated via dma_alloc_coherent is always
aligned to the size of the buffer, so there's no way the RRD and RFD
can ever be in separate 32-bit regions.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 11 Oct 2017 10:56:23 +0000 (11:56 +0100)]
bpf: remove redundant variable old_flags
Variable old_flags is being assigned but is never read; it is redundant
and can be removed.
Cleans up clang warning: Value stored to 'old_flags' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 12 Oct 2017 03:21:23 +0000 (20:21 -0700)]
Merge branch 'mlx4-XDP-TX-improvements'
Tariq Toukan says:
====================
mlx4_en XDP TX improvements
This patchset contains performance improvements
to the XDP_TX use case in the mlx4 Eth driver.
Patch 1 is a simple change in a function parameter type.
Patch 2 replaces a call to a generic function with the
relevant parts inlined.
Patch 3 moves the write of descriptors' constant values
from data path to control path.
Series generated against net-next commit: 833e0e2f24fd net: dst: move cpu inside ifdef to avoid compilation warning
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Wed, 11 Oct 2017 10:17:27 +0000 (13:17 +0300)]
net/mlx4_en: XDP_TX, assign constant values of TX descs on ring creaion
In XDP_TX, some fields in tx_info and tx_desc are constants across
all entries of the different XDP_TX rings.
Assign values to these fields on ring creation time, rather than in
data-path.
Patchset performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Single queue no-RSS optimization ON.
XDP_TX packet rate:
------------------------------
Before | After | Gain |
13.7 Mpps | 14.0 Mpps | %2.2 |
------------------------------
Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 11 Oct 2017 09:53:28 +0000 (10:53 +0100)]
net: mpls: make function ipgre_mpls_encap_hlen static
The function ipgre_mpls_encap_hlen is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'ipgre_mpls_encap_hlen' was not declared. Should it be static?
Fixes: bdc476413dcdb ("ip_tunnel: add mpls over gre support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 11 Oct 2017 10:17:57 +0000 (11:17 +0100)]
sctp: make array sctp_sched_ops static
The array sctp_sched_ops is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'sctp_sched_ops' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Wed, 11 Oct 2017 08:28:00 +0000 (10:28 +0200)]
ipv6: addrconf: don't use rtnl mutex in RTM_GETNETCONF
Instead of relying on rtnl mutex bump device reference count.
After this change, values reported can change in parallel, but thats not
much different from current state, as anyone can change the settings
right after rtnl_unlock (and before userspace processed reply).
While at it, switch to GFP_KERNEL allocation.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: sched: get rid of cls_flower->egress_dev
Introduction of cls_flower->egress_dev was a workaround. Turned out
to be a bit ugly hack. So replace it with more generic and reusable
infrastructure.
This is a dependency of shared block introduction that will be send as
a follow-up patchsets group.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 11 Oct 2017 07:41:09 +0000 (09:41 +0200)]
net: sched: convert cls_flower->egress_dev users to tc_setup_cb_egdev infra
The only user of cls_flower->egress_dev is mlx5. So do the conversion
there alongside with the code originating the call in cls_flower
function fl_hw_replace_filter to the newly introduced egress device
callback infrastucture.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce infrastructure that allows drivers to register callbacks that
are called whenever tc would offload inserted rule and specified device
acts as tc action egress device.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 11 Oct 2017 07:41:07 +0000 (09:41 +0200)]
net: sched: make tc_action_ops->get_dev return dev and avoid passing net
Return dev directly, NULL if not possible. That is enough.
Makes no sense to pass struct net * to get_dev op, as there is only one
net possible, the one the action was created in. So just store it in
mirred priv and use directly.
Rename the mirred op callback function.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to bridge two devices which can send multiplexing and
aggregation (MAP) data. This is done only when the data itself is
not going to be consumed in the stack but is being passed on to a
different endpoint. This is mainly used for testing.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Convert the muxed endpoint to hlist
Rather than using a static array, use a hlist to store the muxed
endpoints and use the mux id to query the rmnet_device.
This is useful as usually very few mux ids are used.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: qualcomm: rmnet: Remove duplicate setting of rmnet private info
The end point is set twice in the local_ep as well as the mux_id and
the real_dev in the rmnet private structure. Remove the local_ep.
While these elements are equivalent, rmnet_endpoint will be
used only as part of the rmnet_port for muxed scenarios in VND mode.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Oct 2017 23:01:57 +0000 (16:01 -0700)]
Merge branch 'qcom-emac-various-minor-fixes'
Timur Tabi says:
====================
net: qcom/emac: various minor fixes
A set of patches for 4.15 that clean up some code, apply minors fixes,
and so on. Some of the code also prepares the driver for a future
version of the EMAC controller.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 11 Oct 2017 19:52:26 +0000 (14:52 -0500)]
net: qcom/emac: clean up some TX/RX error messages
Some of the error messages that are printed by the interrupt handlers
are poorly written. For example, many don't include a device prefix,
so there's no indication that they are EMAC errors.
Also use rate limiting for all messages that could be printed from
interrupt context.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 11 Oct 2017 19:52:25 +0000 (14:52 -0500)]
net: qcom/emac: enforce DMA address restrictions
The EMAC has a restriction that the upper 32 bits of the base addresses
for the RFD and RRD rings must be the same. The ensure that restriction,
we allocate twice the space for the RRD and locate it at an appropriate
address.
We also re-arrange the allocations so that invalid addresses are even
less likely.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 11 Oct 2017 19:52:24 +0000 (14:52 -0500)]
net: qcom/emac: remove unused address arrays
The EMAC is capable of multiple TX and RX rings, but the driver only
supports one ring for each. One function had some left-over unused
code that supports multiple rings, but all it did was make the code
harder to read.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Timur Tabi [Wed, 11 Oct 2017 19:52:23 +0000 (14:52 -0500)]
net: qcom/emac: specify the correct DMA mask
The 64/32-bit DMA mask hackery in the EMAC driver is not actually necessary,
and is technically not accurate. The EMAC hardware is limted to a 45-bit
DMA address. Although no EMAC-enabled system can have that much DDR,
an IOMMU could possible provide a larger address. Rather than play games
with the DMA mappings, the driver should provide a correct value and
trust the DMA/IOMMU layers to do the right thing.
Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: qrtr: Fixes and support receiving version 2 packets
On the latest Qualcomm platforms remote processors are sending packets with
version 2 of the message header. This series starts off with some fixes and
then refactors the qrtr code to support receiving messages of both version 1
and version 2.
As all remotes are backwards compatible transmitted packets continues to be
send as version 1, but some groundwork has been done to make this a per-link
property.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson [Wed, 11 Oct 2017 06:45:23 +0000 (23:45 -0700)]
net: qrtr: Support decoding incoming v2 packets
Add the necessary logic for decoding incoming messages of version 2 as
well. Also make sure there's room for the bigger of version 1 and 2
headers in the code allocating skbs for outgoing messages.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson [Wed, 11 Oct 2017 06:45:22 +0000 (23:45 -0700)]
net: qrtr: Use sk_buff->cb in receive path
Rather than parsing the header of incoming messages throughout the
implementation do it once when we retrieve the message and store the
relevant information in the "cb" member of the sk_buff.
This allows us to, in a later commit, decode version 2 messages into
this same structure.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson [Wed, 11 Oct 2017 06:45:21 +0000 (23:45 -0700)]
net: qrtr: Clean up control packet handling
As the message header generation is deferred the internal functions for
generating control packets can be simplified.
This patch modifies qrtr_alloc_ctrl_packet() to, in addition to the
sk_buff, return a reference to a struct qrtr_ctrl_pkt, which clarifies
and simplifies the helpers to the point that these functions can be
folded back into the callers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson [Wed, 11 Oct 2017 06:45:20 +0000 (23:45 -0700)]
net: qrtr: Pass source and destination to enqueue functions
Defer writing the message header to the skb until its time to enqueue
the packet. As the receive path is reworked to decode the message header
as it's received from the transport and only pass around the payload in
the skb this change means that we do not have to fill out the full
message header just to decode it immediately in qrtr_local_enqueue().
In the future this change also makes it possible to prepend message
headers based on the version of each link.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson [Wed, 11 Oct 2017 06:45:17 +0000 (23:45 -0700)]
net: qrtr: Invoke sk_error_report() after setting sk_err
Rather than manually waking up any context sleeping on the sock to
signal an error we should call sk_error_report(). This has the added
benefit that in-kernel consumers can override this notification with
its own callback.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Wed, 11 Oct 2017 02:35:23 +0000 (02:35 +0000)]
net: hns3: make local functions static
Fixes the following sparse warnings:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:464:5: warning:
symbol 'hns3_change_all_ring_bd_num' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c:477:5: warning:
symbol 'hns3_set_ringparam' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Tue, 10 Oct 2017 19:25:48 +0000 (12:25 -0700)]
atm: idt77105: Drop needless setup_timer()
Calling setup_timer() is redundant when DEFINE_TIMER() has been used.
Cc: Chas Williams <3chas3@gmail.com> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Problem is that skb->destructor contains garbage, and this is
because I accidentally removed tcp_skb_tsorted_anchor_cleanup()
from tcp_unlink_write_queue()
This would trigger with a write(fd, <invalid_memory>, len) attempt,
and we will add to packetdrill this capability to avoid future
regressions.
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue") Reported-by: Yury Norov <ynorov@caviumnetworks.com> Tested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Oct 2017 17:15:01 +0000 (10:15 -0700)]
Merge tag 'mac80211-next-for-davem-2017-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Work continues in various areas:
* port authorized event for 4-way-HS offload (Avi)
* enable MFP optional for such devices (Emmanuel)
* Kees's timer setup patch for mac80211 mesh
(the part that isn't trivially scripted)
* improve VLAN vs. TXQ handling (myself)
* load regulatory database as firmware file (myself)
* with various other small improvements and cleanups
I merged net-next once in the meantime to allow Kees's
timer setup patch to go in.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 13 Sep 2017 20:21:08 +0000 (22:21 +0200)]
cfg80211: implement regdb signature checking
Currently CRDA implements the signature checking, and the previous
commits added the ability to load the whole regulatory database
into the kernel.
However, we really can't lose the signature checking, so implement
it in the kernel by loading a detached signature (regulatory.db.p7s)
and check it against built-in keys.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 15 Oct 2015 12:35:41 +0000 (14:35 +0200)]
cfg80211: reg: remove support for built-in regdb
Parsing and building C structures from a regdb is no longer needed
since the "firmware" file (regulatory.db) can be linked into the
kernel image to achieve the same effect.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 15 Oct 2015 09:22:58 +0000 (11:22 +0200)]
cfg80211: support loading regulatory database as firmware file
As the current regulatory database is only about 4k big, and already
difficult to extend, we decided that overall it would be better to
get rid of the complications with CRDA and load the database into the
kernel directly, but in a new format that is extensible.
The new file format can be extended since it carries a length field
on all the structs that need to be extensible.
In order to be able to request firmware when the module initializes,
move cfg80211 from subsys_initcall() to the later fs_initcall(); the
firmware loader is at the same level but linked earlier, so it can
be called from there. Otherwise, when both the firmware loader and
cfg80211 are built-in, the request will crash the kernel. We also
need to be before device_initcall() so that cfg80211 is available
for devices when they initialize.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 6 Oct 2017 09:53:33 +0000 (11:53 +0200)]
mac80211: only remove AP VLAN frames from TXQ
When removing an AP VLAN interface, mac80211 currently purges
the entire TXQ for the AP interface. Fix this by using the FQ
API introduced in the previous patch to filter frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Xiang Gao [Wed, 11 Oct 2017 02:31:49 +0000 (22:31 -0400)]
mac80211: aead api to reduce redundancy
Currently, the aes_ccm.c and aes_gcm.c are almost line by line copy of
each other. This patch reduce code redundancy by moving the code in these
two files to crypto/aead_api.c to make it a higher level aead api. The
file aes_ccm.c and aes_gcm.c are removed and all the functions there are
now implemented in their headers using the newly added aead api.
Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 10 Oct 2017 07:57:59 +0000 (09:57 +0200)]
MAINTAINERS: update Johannes Berg's entries
Update my MAINTAINERS file entries to list all the right files.
Since I'm also the de-facto wireless extensions maintainer,
there's little point in excluding those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
projects / mirror_ubuntu-focal-kernel.git / log