Marc Zyngier [Tue, 26 Sep 2017 14:57:16 +0000 (15:57 +0100)]
arm64: Make sure SPsel is always set
When the kernel is entered at EL2 on an ARMv8.0 system, we construct
the EL1 pstate and make sure this uses the the EL1 stack pointer
(we perform an exception return to EL1h).
But if the kernel is either entered at EL1 or stays at EL2 (because
we're on a VHE-capable system), we fail to set SPsel, and use whatever
stack selection the higher exception level has choosen for us.
Let's not take any chance, and make sure that SPsel is set to one
before we decide the mode we're going to run in.
Cc: <stable@vger.kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Merge tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix build for !OF providing empty of_find_device_by_node
- fix Abracon vendor prefix
- sync dtx_diff include paths (again)
- a stm32h7 clock binding doc fix
* tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: clk: stm32h7: fix clock-cell size
scripts/dtc: dtx_diff - 2nd update of include dts paths to match build
dt-bindings: fix vendor prefix for Abracon
of: provide inline helper for of_find_device_by_node
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Another round of CR3/PCID related fixes (I think this addresses all
but one of the known problems with PCID support), an objtool fix plus
a Clang fix that (finally) solves all Clang quirks to build a bootable
x86 kernel as-is"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
x86/mm: Factor out CR3-building code
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Three irqchip driver fixes, and an affinity mask helper function bug
fix affecting x86"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "genirq: Restrict effective affinity to interrupts actually using it"
irqchip.mips-gic: Fix shared interrupt mask writes
irqchip/gic-v4: Fix building with ancient gcc
irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull address-limit checking fixes from Ingo Molnar:
"This fixes a number of bugs in the address-limit (USER_DS) checks that
got introduced in the merge window, (mostly) affecting the ARM and
ARM64 platforms"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/syscalls: Move address limit check in loop
arm/syscalls: Optimize address limit check
Revert "arm/syscalls: Check address limit on user-mode return"
syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull misc security layer update from James Morris:
"This is the remaining 'general' change in the security tree for v4.14,
following the direct merging of SELinux (+ TOMOYO), AppArmor, and
seccomp.
That's everything now for the security tree except IMA, which will
follow shortly (I've been traveling for the past week with patchy
internet)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security: fix description of values returned by cap_inode_need_killpriv
Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull TPM updates from James Morris:
"Here are the TPM updates from Jarkko for v4.14, which I've placed in
their own branch (next-tpm). I ended up cherry-picking them as other
changes had been made in Jarkko's branch after he sent me his original
pull request.
I plan on maintaining a separate branch for TPM (and other security
subsystems) from now on.
From Jarkko: 'Not much this time except a few fixes'"
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: ibmvtpm: simplify crq initialization and document crq format
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
Documentation: tpm: add powered-while-suspended binding documentation
tpm: tpm_crb: constify acpi_device_id.
tpm: vtpm: constify vio_device_id
Michal Suchanek [Fri, 24 Feb 2017 19:35:16 +0000 (20:35 +0100)]
tpm: ibmvtpm: simplify crq initialization and document crq format
The crq is passed in registers and is the same on BE and LE hosts.
However, current implementation allocates a structure on-stack to
represent the crq, initializes the members swapping them to BE, and
loads the structure swapping it from BE. This is pointless and causes
GCC warnings about ununitialized members. Get rid of the structure and
the warnings.
Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Hamza Attak [Mon, 14 Aug 2017 18:09:16 +0000 (19:09 +0100)]
tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers
The patch simply replaces all msleep function calls with usleep_range calls
in the generic drivers.
Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a
thousand PCR extends, we see results going from 1m57s unpatched to 40s
with the new patch. We obtain similar results when using the original and
patched tpm_infineon driver, which is also part of the patch.
Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per
extend unpatched and around 7ms with the new patch.
Note that the PCR consistency is untouched with this patch, each TPM has
been tested with 10 million extends and the aggregated PCR value is
continuously verified to be correct.
As an extension of this work, this could potentially and easily be applied
to other vendor's drivers. Still, these changes are not included in the
proposed patch as they are untested.
Signed-off-by: Hamza Attak <hamza@hpe.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Add a new powered-while-suspended property to control the behavior of the
TPM suspend/resume.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sonny Rao <sonnyrao@chromium.org> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
acpi_device_id are not supposed to change at runtime. All functions
working with acpi_device_id provided by <acpi/acpi_bus.h> work with
const acpi_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o
File size After adding 'const':
text data bss dec hex filename
4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Arvind Yadav [Thu, 17 Aug 2017 17:34:21 +0000 (23:04 +0530)]
tpm: vtpm: constify vio_device_id
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Stefan Berger [Thu, 27 Jul 2017 02:27:05 +0000 (22:27 -0400)]
security: fix description of values returned by cap_inode_need_killpriv
cap_inode_need_killpriv returns 1 if security.capability exists and
has a value and inode_killpriv() is required, 0 otherwise. Fix the
description of the return value to reflect this.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Merge branch 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
multiple byte-accesses into one word-access.
- Add missing HWPOISON page fault handler code. I completely missed
that when I added HWPOISON support during this merge window and it
only showed up now with the madvise07 LTP test case.
- Fix backtrace unwinding to stop when stack start has been reached.
- Issue warning if initrd has been loaded into memory regions with
broken RAM modules.
- Fix HPMC handler (parisc hardware fault handler) to comply with
architecture specification.
- Avoid compiler warnings about too large frame sizes.
- Minor init-section fixes.
* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Unbreak bootloader due to gcc-7 optimizations
parisc: Reintroduce option to gzip-compress the kernel
parisc: Add HWPOISON page fault handler code
parisc: Move init_per_cpu() into init section
parisc: Check if initrd was loaded into broken RAM
parisc: Add PDCE_CHECK instruction to HPMC handler
parisc: Add wrapper for pdc_instr() firmware function
parisc: Move start_parisc() into init section
parisc: Stop unwinding at start of stack
parisc: Fix too large frame size warnings
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
- Smattering of miscellanous fixes
- A five patch series for i40iw that had a patch (5/5) that was larger
than I would like, but I took it because it's needed for large scale
users
- An 8 patch series for bnxt_re that landed right as I was leaving on
PTO and so had to wait until now...they are all appropriate fixes for
-rc IMO
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits)
bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
bnxt_re: Fix memory leak in FRMR path
bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
bnxt_re: Fix race between the netdev register and unregister events
bnxt_re: Free up devices in module_exit path
bnxt_re: Fix compare and swap atomic operands
bnxt_re: Stop issuing further cmds to FW once a cmd times out
bnxt_re: Fix update of qplib_qp.mtu when modified
i40iw: Add support for port reuse on active side connections
i40iw: Add missing VLAN priority
i40iw: Call i40iw_cm_disconn on modify QP to disconnect
i40iw: Prevent multiple netdev event notifier registrations
i40iw: Fail open if there are no available MSI-X vectors
RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
IB/bnxt_re: Fix frame stack compilation warning
IB/mlx5: fix debugfs cleanup
IB/ocrdma: fix incorrect fall-through on switch statement
IB/ipoib: Suppress the retry related completion errors
iw_cxgb4: remove the stid on listen create failure
iw_cxgb4: drop listen destroy replies if no ep found
...
1) Fix NAPI poll list corruption in enic driver, from Christian
Lamparter.
2) Fix route use after free, from Eric Dumazet.
3) Fix regression in reuseaddr handling, from Josef Bacik.
4) Assert the size of control messages in compat handling since we copy
it in from userspace twice. From Meng Xu.
5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
from Ursula Braun.
6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.
7) Don't use ARRAY_SIZE on spinlock array which might have zero
entries, from Geert Uytterhoeven.
8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
Kasiviswanathan.
9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
inet: fix improper empty comparison
net: use inet6_rcv_saddr to compare sockets
net: set tb->fast_sk_family
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
MAINTAINERS: update git tree locations for ieee802154 subsystem
net: prevent dst uses after free
net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
net/smc: no close wait in case of process shut down
net/smc: introduce a delay
net/smc: terminate link group if out-of-sync is received
net/smc: longer delay for client link group removal
net/smc: adapt send request completion notification
net/smc: adjust net_device refcount
net/smc: take RCU read lock for routing cache lookup
net/smc: add receive timeout check
net/smc: add missing dev_put
net: stmmac: Cocci spatch "of_table"
lan78xx: Use default values loaded from EEPROM/OTP after reset
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
lan78xx: Fix for eeprom read/write when device auto suspend
...
Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This is the apparmor pull request, similar to SELinux and seccomp.
It's the same series that I was sent to James' security tree + one
regression fix that was found after the series was sent to James and
would have been sent for v4.14-rc2.
Features:
- in preparation for secid mapping add support for absolute root view
based labels
- add base infastructure for socket mediation
- add mount mediation
- add signal mediation
minor cleanups and changes:
- be defensive, ensure unconfined profiles have dfas initialized
- add more debug asserts to apparmorfs
- enable policy unpacking to audit different reasons for failure
- cleanup conditional check for label in label_print
- Redundant condition: prev_ns. in [label.c:1498]
Bug Fixes:
- fix regression in apparmorfs DAC access permissions
- fix build failure on sparc caused by undeclared signals
- fix sparse report of incorrect type assignment when freeing label proxies
- fix race condition in null profile creation
- Fix an error code in aafs_create()
- Fix logical error in verify_header()
- Fix shadowed local variable in unpack_trans_table()"
* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix apparmorfs DAC access permissions
apparmor: fix build failure on sparc caused by undeclared signals
apparmor: fix incorrect type assignment when freeing proxies
apparmor: ensure unconfined profiles have dfas initialized
apparmor: fix race condition in null profile creation
apparmor: move new_null_profile to after profile lookup fns()
apparmor: add base infastructure for socket mediation
apparmor: add more debug asserts to apparmorfs
apparmor: make policy_unpack able to audit different info messages
apparmor: add support for absolute root view based labels
apparmor: cleanup conditional check for label in label_print
apparmor: add mount mediation
apparmor: add the ability to mediate signals
apparmor: Redundant condition: prev_ns. in [label.c:1498]
apparmor: Fix an error code in aafs_create()
apparmor: Fix logical error in verify_header()
apparmor: Fix shadowed local variable in unpack_trans_table()
x86/asm: Fix inline asm call constraints for Clang
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:
With GCC 7.2, however, GCC's behavior has changed. It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm. (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.) It's a bit
overkill, but the performance impact should be negligible. And in fact,
there's a nice improvement with frame pointers disabled:
So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly. In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.
Merge tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the initialization of resources in the ACPI WDAT watchdog
driver, a recent regression in the ACPI device properties handling, a
recent change in behavior causing the ACPI_HANDLE() macro to only work
for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
order to specify the official reviewers for that code.
Specifics:
- Fix the initialization of resources in the ACPI WDAT watchdog
driver that uses unititialized memory which causes compiler
warnings to be triggered (Arnd Bergmann).
- Fix a recent regression in the ACPI device properties handling that
causes some device properties data to be skipped during enumeration
(Sakari Ailus).
- Fix a recent change in behavior that caused the ACPI_HANDLE() macro
to stop working for non-GPL code which is a problem for the NVidia
binary graphics driver, for example (John Hubbard).
- Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
official reviewers for that code (Rafael Wysocki)"
* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
ACPI / watchdog: properly initialize resources
ACPI / PMIC: Add code reviewers to MAINTAINERS
I introduced a regression when reworking the fastreuse port stuff that allows
bind conflicts to occur once a reuseaddr successfully opens on an existing tb.
The root cause is I reversed an if statement which caused us to set the tb as if
there were no owners on the socket if there were, which obviously is not
correct.
Dave could you please queue these changes up for -stable, I've run them through
the net tests and added another test to check for this problem specifically.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Sat, 23 Sep 2017 00:20:08 +0000 (20:20 -0400)]
inet: fix improper empty comparison
When doing my reuseport rework I screwed up and changed a
if (hlist_empty(&tb->owners))
to
if (!hlist_empty(&tb->owners))
This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.
Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port") Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Sat, 23 Sep 2017 00:20:07 +0000 (20:20 -0400)]
net: use inet6_rcv_saddr to compare sockets
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josef Bacik [Sat, 23 Sep 2017 00:20:06 +0000 (20:20 -0400)]
net: set tb->fast_sk_family
We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Fri, 22 Sep 2017 23:42:37 +0000 (19:42 -0400)]
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512d44d ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.
With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().
Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq regression introduced by recent changes related to
the generic DT driver, an initialization time memory leak in cpuidle
on ARM, a PM core bug that may cause system suspend/resume to fail on
some systems, a request type validation issue in the PM QoS framework
and two documentation-related issues.
Specifics:
- Fix a regression in cpufreq on systems using DT as the source of
CPU configuration information where two different code paths
attempt to create the cpufreq-dt device object (there can be only
one) and fix up the "compatible" matching for some TI platforms on
top of that (Viresh Kumar, Dave Gerlach).
- Fix an initialization time memory leak in cpuidle on ARM which
occurs if the cpuidle driver initialization fails (Stefan Wahren).
- Fix a PM core function that checks whether or not there are any
system suspend/resume callbacks for a device, but forgets to check
legacy callbacks which then may be skipped incorrectly and the
system may crash and/or the device may become unusable after a
suspend-resume cycle (Rafael Wysocki).
- Fix request type validation for latency tolerance PM QoS requests
which may lead to unexpected behavior (Jan Schönherr).
- Fix a broken link to PM documentation from a header file and a typo
in a PM document (Geert Uytterhoeven, Rafael Wysocki)"
* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ti-cpufreq: Support additional am43xx platforms
ARM: cpuidle: Avoid memleak if init fail
cpufreq: dt-platdev: Add some missing platforms to the blacklist
PM: core: Fix device_pm_check_callbacks()
PM: docs: Drop an excess character from devices.rst
PM / QoS: Use the correct variable to check the QoS request type
driver core: Fix link to device power management documentation
Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Major additions:
- sysctl and seccomp operation to discover available actions
(tyhicks)
- new per-filter configurable logging infrastructure and sysctl
(tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action
- self-tests for new behaviors"
[ This is the seccomp part of the security pull request during the merge
window that was nixed due to unrelated problems - Linus ]
* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: Unrename SECCOMP_RET_KILL
selftests/seccomp: Test thread vs process killing
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
seccomp: Introduce SECCOMP_RET_KILL_PROCESS
seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
seccomp: Action to log before allowing
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
seccomp: Selftest for detection of filter flag support
seccomp: Sysctl to configure actions that are allowed to be logged
seccomp: Operation for checking if an action is available
seccomp: Sysctl to display available actions
seccomp: Provide matching filter for introspection
selftests/seccomp: Refactor RET_ERRNO tests
selftests/seccomp: Add simple seccomp overhead benchmark
selftests/seccomp: Add tests for basic ptrace actions
Merge tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various SMB3 fixes for stable and security improvements from the
recently completed SMB3/Samba test events
* tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
SMB3: handle new statx fields
SMB: Validate negotiate (to protect against downgrade) even if signing off
cifs: release auth_key.response for reconnect.
cifs: release cifs root_cred after exit_cifs
CIFS: make arrays static const, reduces object code size
[SMB3] Update session and share information displayed for debugging SMB2/SMB3
cifs: show 'soft' in the mount options for hard mounts
SMB3: Warn user if trying to sign connection that authenticated as guest
SMB3: Fix endian warning
Fix SMB3.1.1 guest authentication to Samba
Merge tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two small but important fixes: RADOS semantic change in upcoming v12.2.1
release and a rare NULL dereference in create_session_open_msg()"
* tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client:
ceph: avoid panic in create_session_open_msg() if utsname() returns NULL
libceph: don't allow bidirectional swap of pg-upmap-items
Stefan Schmidt [Fri, 22 Sep 2017 12:28:46 +0000 (14:28 +0200)]
MAINTAINERS: update git tree locations for ieee802154 subsystem
Patches for ieee802154 will go through my new trees towards netdev from
now on. The 6LoWPAN subsystem will stay as is (shared between ieee802154
and bluetooth) and go through the bluetooth tree as usual.
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Steve French [Fri, 22 Sep 2017 06:40:27 +0000 (01:40 -0500)]
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
* tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: endpoint: Use correct "end of test" interrupt
MIPS: PCI: Move map_irq() hooks out of initdata
Pull arch/tile fixes from Chris Metcalf:
"These are a code cleanup and config cleanup, respectively"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: array underflow in setup_maxnodemem()
tile: defconfig: Cleanup from old Kconfig options
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- #ifdef CONFIG_EFI around __efi_fpsimd_begin/end
- Assembly code alignment reduced to 4 bytes from 16
- Ensure the kernel is compiled for LP64 (there are some arm64
compilers around defaulting to ILP32)
- Fix arm_pmu_acpi memory leak on the error path
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
arm64: ensure the kernel is compiled for LP64
arm64: relax assembly code alignment from 16 byte to 4 byte
arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
Steve French [Fri, 22 Sep 2017 02:32:29 +0000 (21:32 -0500)]
SMB3: handle new statx fields
We weren't returning the creation time or the two easily supported
attributes (ENCRYPTED or COMPRESSED) for the getattr call to
allow statx to return these fields.
Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>\ Acked-by: Jeff Layton <jlayton@poochiereds.net> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.
parisc: Unbreak bootloader due to gcc-7 optimizations
gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into
word-wise accesses if the 32-bit integer output_len is declared as
external. This panics then the bootloader since we don't have the
unaligned access fault trap handler installed during boot time.
Avoid this optimization by declaring output_len as byte-aligned and thus
unbreak the bootloader code.
Additionally, compile the boot code optimized for size.
John Johansen [Thu, 31 Aug 2017 16:54:43 +0000 (09:54 -0700)]
apparmor: fix apparmorfs DAC access permissions
The DAC access permissions for several apparmorfs files are wrong.
.access - needs to be writable by all tasks to perform queries
the others in the set only provide a read fn so should be read only.
With policy namespace virtualization all apparmor needs to control
the permission and visibility checks directly which means DAC
access has to be allowed for all user, group, and other.
BugLink: http://bugs.launchpad.net/bugs/1713103 Fixes: c97204baf840b ("apparmor: rename apparmor file fns and data to indicate use") Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Wed, 23 Aug 2017 19:10:39 +0000 (12:10 -0700)]
apparmor: fix build failure on sparc caused by undeclared signals
In file included from security/apparmor/ipc.c:23:0:
security/apparmor/include/sig_names.h:26:3: error: 'SIGSTKFLT' undeclared here (not in a function)
[SIGSTKFLT] = 16, /* -, 16, - */
^
security/apparmor/include/sig_names.h:26:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:26:3: note: (near initialization for 'sig_map')
security/apparmor/include/sig_names.h:51:3: error: 'SIGUNUSED' undeclared here (not in a function)
[SIGUNUSED] = 34, /* -, 31, - */
^
security/apparmor/include/sig_names.h:51:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:51:3: note: (near initialization for 'sig_map')
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: c6bf1adaecaa ("apparmor: add the ability to mediate signals") Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Wed, 16 Aug 2017 16:33:48 +0000 (09:33 -0700)]
apparmor: fix incorrect type assignment when freeing proxies
sparse reports
poisoning the proxy->label before freeing the struct is resulting in
a sparse build warning.
../security/apparmor/label.c:52:30: warning: incorrect type in assignment (different address spaces)
../security/apparmor/label.c:52:30: expected struct aa_label [noderef] <asn:4>*label
../security/apparmor/label.c:52:30: got struct aa_label *<noident>
fix with RCU_INIT_POINTER as this is one of those cases where
rcu_assign_pointer() is not needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Wed, 16 Aug 2017 12:48:06 +0000 (05:48 -0700)]
apparmor: ensure unconfined profiles have dfas initialized
Generally unconfined has early bailout tests and does not need the
dfas initialized, however if an early bailout test is ever missed
it will result in an oops.
Be defensive and initialize the unconfined profile to have null dfas
(no permission) so if an early bailout test is missed we fail
closed (no perms granted) instead of oopsing.
Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Wed, 16 Aug 2017 12:40:49 +0000 (05:40 -0700)]
apparmor: fix race condition in null profile creation
There is a race when null- profile is being created between the
initial lookup/creation of the profile and lock/addition of the
profile. This could result in multiple version of a profile being
added to the list which need to be removed/replaced.
Since these are learning profile their is no affect on mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
John Johansen [Wed, 19 Jul 2017 06:18:33 +0000 (23:18 -0700)]
apparmor: add base infastructure for socket mediation
Provide a basic mediation of sockets. This is not a full net mediation
but just whether a spcific family of socket can be used by an
application, along with setting up some basic infrastructure for
network mediation to follow.
the user space rule hav the basic form of
NETWORK RULE = [ QUALIFIERS ] 'network' [ DOMAIN ]
[ TYPE | PROTOCOL ]
John Johansen [Wed, 19 Jul 2017 06:37:18 +0000 (23:37 -0700)]
apparmor: make policy_unpack able to audit different info messages
Switch unpack auditing to using the generic name field in the audit
struct and make it so we can start adding new info messages about
why an unpack failed.
Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com>
John Johansen [Sun, 6 Aug 2017 12:39:08 +0000 (05:39 -0700)]
apparmor: add support for absolute root view based labels
With apparmor policy virtualization based on policy namespace View's
we don't generally want/need absolute root based views, however there
are cases like debugging and some secid based conversions where
using a root based view is important.
Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Arnold <seth.arnold@canonical.com>
John Johansen [Wed, 19 Jul 2017 06:04:47 +0000 (23:04 -0700)]
apparmor: add mount mediation
Add basic mount mediation. That allows controlling based on basic
mount parameters. It does not include special mount parameters for
apparmor, super block labeling, or any triggers for apparmor namespace
parameter modifications on pivot root.
default userspace policy rules have the form of
MOUNT RULE = ( MOUNT | REMOUNT | UMOUNT )
MOUNT = [ QUALIFIERS ] 'mount' [ MOUNT CONDITIONS ] [ SOURCE FILEGLOB ]
[ '->' MOUNTPOINT FILEGLOB ]
John Johansen [Wed, 19 Jul 2017 05:56:22 +0000 (22:56 -0700)]
apparmor: add the ability to mediate signals
Add signal mediation where the signal can be mediated based on the
signal, direction, or the label or the peer/target. The signal perms
are verified on a cross check to ensure policy consistency in the case
of incremental policy load/replacement.
The optimization of skipping the cross check when policy is guaranteed
to be consistent (single compile unit) remains to be done.
policy rules have the form of
SIGNAL_RULE = [ QUALIFIERS ] 'signal' [ SIGNAL ACCESS PERMISSIONS ]
[ SIGNAL SET ] [ SIGNAL PEER ]
SIGNAL ACCESS PERMISSIONS = SIGNAL ACCESS | SIGNAL ACCESS LIST
SIGNAL ACCESS LIST = '(' Comma or space separated list of SIGNAL
ACCESS ')'
Dan Carpenter [Thu, 13 Jul 2017 07:39:20 +0000 (10:39 +0300)]
apparmor: Fix an error code in aafs_create()
We accidentally forgot to set the error code on this path. It means we
return NULL instead of an error pointer. I looked through a bunch of
callers and I don't think it really causes a big issue, but the
documentation says we're supposed to return error pointers here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
verify_header() is currently checking whether interface version is less
than 5 *and* greater than 7, which always evaluates to false. Instead it
should check whether it is less than 5 *or* greater than 7.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
apparmor: Fix shadowed local variable in unpack_trans_table()
with W=2:
security/apparmor/policy_unpack.c: In function ‘unpack_trans_table’:
security/apparmor/policy_unpack.c:469: warning: declaration of ‘pos’ shadows a previous local
security/apparmor/policy_unpack.c:451: warning: shadowed declaration is here
Rename the old "pos" to "saved_pos" to fix this.
Fixes: 5379a3312024a8be ("apparmor: support v7 transition format compatible with label_parse") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: John Johansen <john.johansen@canonical.com>
Somnath Kotur [Thu, 31 Aug 2017 03:57:35 +0000 (09:27 +0530)]
bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
FW needs the 0th GID Entry in the Table to be preserved before
it's corresponding QP1 is deleted, else it will fail the cmd.
Check for the same and return to prevent error msg being logged for
cmd failure.
Selvin Xavier [Thu, 31 Aug 2017 03:57:34 +0000 (09:27 +0530)]
bnxt_re: Fix memory leak in FRMR path
This patch fixes a memory leak issue when alloc_mr is used.
mr->pages and mr->npages are used only in alloc_mr path. mr->pages
is allocated when alloc_mr is called or in the case of FRMR, while
creating the MR. mr->npages is updated only when the MR created
is used i.e. after invoking map_mr_sg verb, before data transfer.
In the dereg_mr path, if mr->npages is 0, driver ends up not freeing
the memory created.
Removing the npages check from the dereg_mr path for kernel consumers.
Somnath Kotur [Thu, 31 Aug 2017 03:57:33 +0000 (09:27 +0530)]
bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
When there is a NETDEV_UNREGISTER event, bnxt_re driver calls
ib_unregister_device() (RTNL lock held).
ib_unregister_device attempts to flush a worker queue scheduled by
ib_core and that queue might have a pending ib_query_port().
ib_query_port in turn calls bnxt_re_query_port(), which while querying the
link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which
was already held by NETDEV_UNREGISTER.
Fixing the issue by removing the link speed query from bnxt_re_query_port()
Now the speed is queried post a successful ib_register_device or whenever
there is a NETDEV_CHANGE event.
Somnath Kotur [Thu, 31 Aug 2017 03:57:32 +0000 (09:27 +0530)]
bnxt_re: Fix race between the netdev register and unregister events
Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain,
the IB stack registration is spawned off to a workqueue since that also
requires an rtnl lock.
There could be 2 kinds of races between the NETDEV_REGISTER and the
NETDEV_UNREGISTER event handling.
a)The NETDEV_UNREGISTER event is received in rapid succession after
the NETDEV_REGISTER event even before the work queue got a chance to run.
b)The NETDEV_UNREGISTER event is received while the workqueue that handles
registration with the IB stack is still in progress.
Handle both the races with a bit flag that is set just before the work item
is queued and cleared in the workqueue after the event is handled just
before the workqueue item is freed.
While adding the new flag, it was noted that the flags are all used in
*_bit() operations which expect a bit number and not a literal constant
with a bit set. So change the numbers to be bit numbers.
Somnath Kotur [Thu, 31 Aug 2017 03:57:29 +0000 (09:27 +0530)]
bnxt_re: Stop issuing further cmds to FW once a cmd times out
Once a cmd to FW times out(after 20s) it is reasonable to
assume the FW or atleast the control path is dead.
No point issuing further cmds to the FW as each subsequent cmd
with another 20s timeout will cascade resulting in unnecessary
traces and/or NMI Lockups.
Devesh Sharma [Thu, 31 Aug 2017 03:57:28 +0000 (09:27 +0530)]
bnxt_re: Fix update of qplib_qp.mtu when modified
The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.
Commit 24587380f61d ("parisc: Add MADV_HWPOISON and MADV_SOFT_OFFLINE") added
the necessary constants to handle hardware-poisoning. Those were needed to
support the page deallocation feature from firmware.
But I completely missed to add the relevant fault handler code. This now
showed up when I ran the madvise07 testcase from the Linux Test Project,
which failed with a kernel BUG at arch/parisc/mm/fault.c:320.
With this patch the parisc kernel now behaves like other platforms and
gives the same kernel syslog warnings when poisoning pages.
parisc: Add PDCE_CHECK instruction to HPMC handler
According to the programming note at page 1-31 of the PA 1.1 Firmware
Architecture document, one should use the PDC_INSTR firmware function to
get the instruction that invokes a PDCE_CHECK in the HPMC handler. This
patch follows this note and sets the instruction which has been a nop up
until now.
Testing on a C3000 and C8000 showed that this firmware call isn't
implemented on those machines, so maybe it's only needed on older ones.
Check stack pointer if we are reaching the stack end and stop unwinding
if we do. This fixes early backtraces and avoids showing unrealistic
call stacks.
i40iw: Add support for port reuse on active side connections
During OpenMPI scale up testing, we observe rdma_connect
failures if ports are reused on multiple connections.
This is because the Control Queue-Pair (CQP) command to add
the reused port to Accelerated Port Bit VectorTable (APBVT)
fails as there already exists an entry.
Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use.
i40iw: Call i40iw_cm_disconn on modify QP to disconnect
If QP modify to closing/terminate/error fails, connection is
not torn down as there is no corresponding asynchronous
event that will initiate the teardown.
Add explicit call to i40iw_cm_disconn if not waiting in
modify QP, otherwise schedule it in CM timer.
Netdev event notifier registration/de-registration is not
synchronized with a lock and there is a possibility of a
duplicate registration of notifier before the unregister
completes.
Register netdev event notifiers during module init and
de-register them at module exit.
This avoids the need to tie the registration to first netdev
client interface open and de-registration to last client
interface close and the synchronization to achieve it.
This also fixes a crash due to duplicate registration.
Leon Romanovsky [Tue, 19 Sep 2017 10:22:13 +0000 (13:22 +0300)]
IB/bnxt_re: Fix frame stack compilation warning
Reduce stack size by dynamically allocating memory instead
of declaring large struct on the stack:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
Cc: Selvin Xavier <selvin.xavier@broadcom.com> Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
If delay_drop_debugfs_init() fails in any of the operations to create
debugfs, it is calling delay_drop_debugfs_cleanup() as part of its
cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since
we have not yet pointed 'dbg' to the debugfs we need to cleanup, the
cleanup fails and we are left with stray debugfs elements and also a
memory leak.
Fixes: 4a5fd5d2965c ("IB/mlx5: Add necessary delay drop assignment") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Mon, 11 Sep 2017 16:03:13 +0000 (17:03 +0100)]
IB/ocrdma: fix incorrect fall-through on switch statement
In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and
add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN
however the case OCRDMA_MBX_STATUS_FAILED is missing a break and
falls through to the default case which then re-assigns err_num
to -EFAULT. Fix this so that err_num is assigned to -EAGAIN
for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT
otherwise.
Detected by CoverityScan CID#703125 ("Missing break in switch")
Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
The original 20ms delay is only marginally enough delay after a block write
operation during firmware update. Let's increase the delay to ensure that
the controller finishes up storing the page to avoid failures in the
firmware updates.
Steve Wise [Tue, 5 Sep 2017 18:52:34 +0000 (11:52 -0700)]
iw_cxgb4: remove the stid on listen create failure
If a listen create fails, then the server tid (stid) is incorrectly left
in the stid idr table, which can cause a touch-after-free if the stid
is looked up and the already freed endpoint is touched. So make sure
and remove it in the error path.
Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Tue, 5 Sep 2017 18:52:33 +0000 (11:52 -0700)]
iw_cxgb4: drop listen destroy replies if no ep found
If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails,
then we need to handle a subsequent CPL if it arrives and the stid has
been released. In this case silently drop it.
Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Merge tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A fix for a missing __init annotation and two cleanup patches"
* tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen, arm64: drop dummy lookup_address()
xen: don't compile pv-specific parts if XEN_PV isn't configured
xen: x86: mark xen_find_pt_base as __init
Merge tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"It turns out our single-fix pull from last week was too good to be
true. I missed a few fixes in that pull that had already come in
because I was on leave, but also we hadn't found the bugs yet. So this
week it's a bit bigger, though not ridiculous. Hopefully things will
settle down from here on.
Four fixes for the new instruction emulation code. A fix for CPU
offline on bare metal machines when certain idle states are not
supported, and a fix for a device_node refcounting oops during CPU
hotplug, caused by recent changes.
Going to stable are a fix for an oops during core dump on machines
that have TM (Transactional Memory) disabled. Reordering some EEH
initialisation to avoid trashing memory, and another device_node
refcounting fix.
And a few other minor things.
Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham
R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber,
Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak
Desai, Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR
powerpc/eeh: Create PHB PEs after EEH is initialized
powerpc/kprobes: Update optprobes to use emulate_update_regs()
powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline
powerpc/sstep: mullw should calculate a 64 bit signed result
powerpc/sstep: Fix issues with mcrf
powerpc/sstep: Fix issues with set_cr0()
powerpc/tm: Flush TM only if CPU has TM feature
powerpc/sysrq: Fix oops whem ppmu is not registered
powerpc/configs: Update for CONFIG_SND changes
powerpc/e6500: Update machine check for L1D cache err
Merge branch '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
- Fix a build error on MSP71xx which used to rely on somehow magically
<asm/setup.h> being pulled in which no longer happens.
- Fix the __write_64bit_c0_split inline assembler where there was the
theoretical possibility of GCC interpret the constraints such that
bad code could result.
- A __init was causing section mismatch errors on Alchemy. Just to be
on the safe side, Manuel's patch does away with all of them.
- Fix perf event init.
* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: PCI: fix pcibios_map_irq section mismatch
MIPS: Fix input modify in __write_64bit_c0_split()
MIPS: MSP71xx: Include asm/setup.h
MIPS: Fix perf event init
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- A couple of bug fixes: memory management, perf, cio, dasd and
scm_blk.
- A larger change in regard to the CPU topology to improve performance
for systems running under z/VM or KVM.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/topology: enable / disable topology dynamically
s390/topology: alternative topology for topology-less machines
s390/mm: fix write access check in gup_huge_pmd()
s390/mm: make pmdp_invalidate() do invalidation only
s390/cio: recover from bad paths
s390/scm_blk: consistently use blk_status_t as error type
s390/dasd: fix race during dasd initialization
s390/perf: fix bug when creating per-thread event
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix compiler warnings in inside-secure
- Fix LS1021A support in caam
- Avoid using RBP in x86 crypto code
- Fix bug in talitos that prevents hashing with algif
- Fix bugs talitos hashing code that cause incorrect hash result
- Fix memory freeing path bug in drbg
- Fix af_alg crash when two SG lists are chained
Rdma device driver may not have implemented (*get_link_layer)()
so it can not be called directly. Should use appropriate helper function.
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Fixes: 523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations") Cc: stable@kernel.org # 4.13 Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Robin Murphy [Thu, 21 Sep 2017 10:20:58 +0000 (11:20 +0100)]
iommu/of: Remove PCI host bridge node check
of_pci_iommu_init() tries to be clever and stop its alias walk at the
device represented by master_np, in case of weird PCI topologies where
the bridge to the IOMMU and the rest of the system is not at the root.
It turns out this is a bit short-sighted, since there are plenty of
other callers of pci_for_each_dma_alias() which would also need the same
behaviour in that situation, and the only platform so far with such a
topology (Cavium ThunderX2) already solves it more generally via a PCI
quirk. As this check is effectively redundant, and returning a boolean
value as an int is a bit broken anyway, let's just get rid of it.
projects / mirror_ubuntu-kernels.git / log