David Francis [Wed, 18 Jul 2018 20:03:30 +0000 (16:03 -0400)]
drm/amd/display: Read back max backlight value at boot
[Why]
If there is no program explicitly setting the backlight
brightness (for example, during a minimal install of linux), the
hardware defaults to maximum brightness but the backlight_device
defaults to 0 value. Thus, settings displays the wrong brightness
value.
[How]
When creating the backlight device, set brightness to max
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This hook that is supposed to read the actual backlight value
is used in a few places throughout the kernel to setup or force
update on backlight
[How]
Create a dc function that calls the existing abm function, and
call that function from amdgpu
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Thu, 19 Jul 2018 12:22:16 +0000 (08:22 -0400)]
drm/amd/display: Use requested HDMI aspect ratio
[Why]
The DRM mode's HDMI picture aspect ratio field was never saved in
dc_stream's timing struct. This causes us to mistake a new stream to
have the same timings as the old, even though the user has requested a
different aspect ratio.
[How]
Save DRM's aspect ratio field within dc_stream's timing struct.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107153 Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Harry Wentland [Thu, 2 Aug 2018 19:32:01 +0000 (15:32 -0400)]
drm/amd/display: Only require EDID read for HDMI and DVI
[Why]
VGA sometimes has trouble retrieving the EDID on very long cables, KVM
switches, or old displays.
[How]
Only require EDID read for HDMI and DVI and exempt other types (DP,
VGA). We currently don't support VGA but if anyone adds support in the
future this might get overlooked.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Suggested-by: Michel Dänzer <michel@daenzer.net> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Wed, 1 Aug 2018 14:48:23 +0000 (10:48 -0400)]
drm/amd/display: Report non-DP display as disconnected without EDID
[Why]
Some boards seem to have a problem where HPD is high on HDMI even though
no display is connected. We don't want to report these as connected. DP
spec still requires us to report DP displays as connected when HPD is
high but we can't read the EDID in order to go to fail-safe mode.
[How]
If connector_signal is not DP abort detection if we can't retrieve the
EDID.
v2: Add Bugzilla and stable
Bugzilla: https://bugs.freedesktop.org/107390
Bugzilla: https://bugs.freedesktop.org/106846 Cc: stable@vger.kernel.org Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 1 Aug 2018 05:49:33 +0000 (13:49 +0800)]
drm/ttm: clean up non-x86 definitions on ttm_tt
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_tt.c.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 1 Aug 2018 05:49:32 +0000 (13:49 +0800)]
drm/ttm: Add ttm_set_pages_wc and ttm_set_pages_uc helper
These two helpers will be used on set page caching.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 1 Aug 2018 05:49:31 +0000 (13:49 +0800)]
drm/ttm: fix missed conversion of set_pages_array_uc
This patch fixed the error when do not configure CONFIG_X86, otherwise, below
error will be encountered.
All errors (new ones prefixed by >>):
drivers/gpu/drm/ttm/ttm_page_alloc_dma.c: In function 'ttm_set_pages_caching':
>> drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:272:7: error: implicit declaration of function 'set_pages_array_uc'; did you mean
+'ttm_set_pages_array_uc'? [-Werror=implicit-function-declaration]
r = set_pages_array_uc(pages, cpages);
^~~~~~~~~~~~~~~~~~
ttm_set_pages_array_uc
cc1: some warnings being treated as errors
Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this by sanitizing idx before using it to index data.states
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Colin Ian King [Tue, 31 Jul 2018 10:42:54 +0000 (11:42 +0100)]
drm/amd/display: add missing void parameter to dc_create_transfer_func
Add a missing void parameter to function dc_create_transfer_func, fixes
sparse warning:
warning: non-ANSI function declaration of function 'dc_create_transfer_func'
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
v2:
* set prefix to drm/amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Replace ttm_bo_reference with ttm_bo_get
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
v2:
* changed prefix to drm/amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 30 Jul 2018 09:40:06 +0000 (11:40 +0200)]
drm/scheduler: stop setting rq to NULL
We removed the redundancy of having an extra scheduler field, so we
can't set the rq to NULL any more or otherwise won't know which
scheduler to use for the cleanup.
Just remove the entity from the scheduling list instead.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107367 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 26 Jul 2018 11:43:49 +0000 (13:43 +0200)]
drm/scheduler: only kill entity if last user is killed v2
Note which task is using the entity and only kill it if the last user of
the entity is killed. This should prevent problems when entities are leaked to
child processes.
v2: add missing kernel doc
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 30 Jul 2018 14:16:01 +0000 (16:16 +0200)]
drm/amdgpu: allocate the bo_list array after the list
This avoids multiple allocations for the head and the array.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 30 Jul 2018 11:46:04 +0000 (13:46 +0200)]
drm/amdgpu: always recreate bo_list
The bo_list handle is allocated by OP_CREATE, so in OP_UPDATE here we just
re-create the bo_list object and replace the handle. This way we don't
need locking to protect the bo_list because it's always re-created when
changed.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 27 Jul 2018 13:32:04 +0000 (15:32 +0200)]
drm/amdgpu: add proper error handling to amdgpu_bo_list_get
Otherwise we silently don't use a BO list when the handle is invalid.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 25 Jul 2018 03:51:46 +0000 (11:51 +0800)]
drm/amdgpu: fix a reversed condition
This test was reversed so it would end up leading to vddnb value
can't be read via hwmon on APU.
Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Rex Zhu [Wed, 25 Jul 2018 03:45:03 +0000 (11:45 +0800)]
drm/amd/pp: Convert voltage unit in mV*4 to mV on CZ/ST
the voltage showed in debugfs and hwmon should be in mV
Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Rex Zhu [Fri, 20 Jul 2018 08:26:46 +0000 (16:26 +0800)]
drm/amd/pp/Polaris12: Fix a chunk of registers missed to program
DIDTConfig_Polaris12[] table missed a big chunk of data.
Pointed by aidan.fabius <aidan.fabius@coreavi.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/amdgpu: clean up the superfluous space and align the comment text for amdgpu_ttm
This patch cleans up spaces and align the text to refine the comment for
amdgpu_ttm.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/ttm: Merge hugepage attr changes in ttm_dma_page_put. (v2)
Every set_pages_array_wb call resulted in cross-core
interrupts and TLB flushes. Merge more of them for
less overhead.
This reduces the time needed to free a 1.6 GiB GTT WC
buffer as part of Vulkan CTS from ~2 sec to < 0.25 sec.
(Allocation still takes more than 2 sec though)
(v2): use set_pages_wb instead of set_memory_wb.
Signed-off-by: Bas Nieuwenhuizen <basni@chromium.org> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/ttm: clean up non-x86 definitions on ttm_page_alloc
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc.c.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/ttm: clean up non-x86 definitions on ttm_page_alloc_dma
All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_page_alloc_dma.c.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves all non-x86 abstraction to the ttm_set_memory header.
It is to make function calling more clearly.
(v2): add ttm_ prefix.
Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Tue, 17 Jul 2018 13:43:44 +0000 (09:43 -0400)]
drm/amd/display: Prevent PSR from being enabled if initialization fails
[Why]
PSR_SET command is sent to the microcontroller in order to initialize
parameters needed for PSR feature, such as telling the microcontroller
which pipe is driving the PSR supported panel. When this command is
skipped or fails, the microcontroller may program the wrong thing if
driver tries to enable PSR.
[How]
If PSR_SET fails, do not set psr_enable flag to indicate the feature is
not yet initialized.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Vega10 black screen after mode change
[Why]
The sequence is slightly changed when bring .set_bandwidth out
from the end of programming backend to the end of programming
surface. Vega10 doesn't like to get clocks updated if
stream_count is zero in the current context (Atomic Reset).
[How]
Do not update clocks if no stream is showing up in the context.
[Why]
Some receivers seem to fail the first link training but are good on
subsequent tries. We want to retry link training again. This fixes
HTC vive pro not lighting up after being disabled.
[How]
Check if the link training passed without fall back if this is not
the case then we retry link training.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 12:52:42 +0000 (14:52 +0200)]
drm/amdgpu: patch the IBs for the second UVD instance v2
Patch the IBs for the second UVD instance so that userspace don't need
to care about the instance they submit to.
v2: use direct IB patching
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 23 Jul 2018 14:01:39 +0000 (16:01 +0200)]
drm/amdgpu: add support for inplace IB patching for MM engines v2
We are going to need that for the second UVD instance on Vega20.
v2: rename to patch_cs_in_place
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-and-tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 27 Jul 2018 02:31:07 +0000 (12:31 +1000)]
Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
Updates for 4.19. Mostly bug fixes and cleanups. Highlights:
- Internal API cleanup in GPU scheduler
- Decouple i2c and aux abstractions in DC
- Update maintainers
- Misc cleanups
- Misc bug fixes
Dave Airlie [Fri, 27 Jul 2018 02:26:33 +0000 (12:26 +1000)]
Merge tag 'exynos-drm-next-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Cleanups
- Change g2d driver to component based driver
. g2d driver was last customed sub driver so this patch series
changes it to component based driver, which also makes gem handling
to be more simplify.
- Cleanup of Exynos DRM suspend/resume
. Register exynos drm core suspend/resume functions
to prepare/complete callbacks of dev_pm_ops instead of suspend/resume
callbacks to ensure exynos_drm_suspend() is called before any suspend
callback from the real devices to avoid some issues on boards with
complex pipelines.
. Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS
to ensure that resources of each devices will be released
for the system PM suspend/resume cycle.
- Remove local value not used.
Dave Airlie [Fri, 27 Jul 2018 02:20:43 +0000 (12:20 +1000)]
Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld into drm-next
I have a couple of small patches for malidp to be applied in drm-next.
They have arisen from the decision to switch the writeback connectors to
always connected.
Dave Airlie [Fri, 27 Jul 2018 02:20:04 +0000 (12:20 +1000)]
Merge tag 'imx-drm-next-2018-07-20' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: cleanup and csi improvements
- Remove the unused struct imx_drm_crtc and the unused pipes field
from imx_drm_device and replace drm_dev_unref with drm_dev_put.
- Extend CSI configuration to support RGB888 and BGR888 capture,
as well as 16-bit RGB565 capture via a parallel bus.
- Add CPMEM support for negative interlace offsets, which is
necessary to support writing captured bottom-top interlaced
fields to memory with interleaved lines.
Jia-Ju Bai [Mon, 23 Jul 2018 14:29:56 +0000 (22:29 +0800)]
gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The address printed is the actual address, not the page.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 09:16:35 +0000 (11:16 +0200)]
drm/amdgpu: reduce the number of placements for a BO
Make struct amdgpu_bo a bit smaller.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 16 Jul 2018 14:12:24 +0000 (16:12 +0200)]
drm/amdgpu: consistenly name amdgpu_bo_ functions
Just rename functions, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 19 Jul 2018 09:39:37 +0000 (11:39 +0200)]
MAINTAINERS: add entry for AMD PP code
Add separate entry for the power managent code on AMD GPUs.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <rezhu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 11:16:06 +0000 (13:16 +0200)]
MAINTAINERS: Add separate section for DC
Note that Harry and Leo Li are maintainers for that stuff.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 11:06:02 +0000 (13:06 +0200)]
MAINTAINERS: add new TTM maintainers
Roger unfortunately doesn't work for AMD any longer. So add Rui and
Jerry as co-maintainer as well.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 12:17:59 +0000 (14:17 +0200)]
drm/amdgpu: expose only the first UVD instance for now
Going to completely rework the context to ring mapping with Nayan's GSoC
work, but for now just stopping to expose the second UVD instance should
do it.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 11:58:16 +0000 (13:58 +0200)]
drm/amdgpu: clean up coding style a bit
No need to bitcast a boolean and even if we should use "!!" instead.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 9 Jul 2018 21:25:42 +0000 (17:25 -0400)]
drm/amd/display: DC 3.1.58
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Thu, 12 Jul 2018 14:35:01 +0000 (10:35 -0400)]
drm/amd/display: separate dc_debug into dc_debug_options and dc_debug data
[why]
confusing as to which part of debug is informational, and which part causes behavioral change
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Aux engine is created from i2caux layer. We want to remove this layer
and use the engine directly.
[How]
Decouple aux engine from i2caux. Move aux engine related code to dce folder and use
dc resource pool to manage the engine. And use the engine functions directly
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: DPP CM ICSC AYCRCB8888 format support
[why]
Diags has POR to run the video workload using AYCRCB8888 through DCN;
capture it through DWB and send it to VCN hardware to encode
[how]
added the code to support this format so that DPP ICSC will be able to
convert it from YUV444 to internal RGB and DWB OCSC will be able to
convert from internal RGB to YUV420
Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Wed, 11 Jul 2018 20:20:13 +0000 (16:20 -0400)]
drm/amd/display: On dce100, set clocks to 0 on suspend
[Why]
When a dce100 asic was suspended, the clocks were not set to 0.
Upon resume, the new clock was compared to the existing clock,
they were found to be the same, and so the clock was not set.
This resulted in a pernicious blackscreen.
[How]
In atomic commit, check to see if there are any active pipes.
If no, set clocks to 0
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Wed, 11 Jul 2018 19:31:24 +0000 (15:31 -0400)]
drm/amd/display: allow diags to skip initial link training
[why]
diag specify what the full config and is only concerned about pass/fail at the end
having inter-op code like verifiying we can actually train at reported link rate
slows down diag test and add complexity we don't need
[how]
add dc_debug option to skip capability link trianing
also remove hbr in function name as verify is not specific to hbr
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Ken Chalmers <ken.chalmers@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The warning message floods the dmesg log on Tonga even
though it is expected to have a pix_clk set to zero,
when the pipe is not active.
[how]
remove the assert
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Mon, 23 Jul 2018 09:41:51 +0000 (15:11 +0530)]
drm/amdgpu: move the amdgpu_fbdev_set_suspend() further up
This patch moves amdgpu_fbdev_set_suspend() to the beginning
of suspend sequence.
This is to ensure fbcon does not to write to the VRAM
after GPU is powerd down.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Thu, 19 Jul 2018 15:38:18 +0000 (17:38 +0200)]
drm/amdgpu: Don't warn on destroying a pinned BO
The warning turned out to be not so useful, as BO destruction tends to
be deferred to a workqueue.
Also, we should be preventing any damage from this now, so not really
important anymore to fix code doing this.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/exynos/mixer: Remove unused local variable priv
Remove local variable 'priv' to fix GCC warning:
drivers/gpu/drm/exynos/exynos_mixer.c: In function 'mixer_initialize':
drivers/gpu/drm/exynos/exynos_mixer.c:840:29: warning: variable 'priv' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Mon, 11 Jun 2018 12:25:00 +0000 (14:25 +0200)]
drm/exynos: Ensure suspended runtime PM state during system suspend
Add calls to pm_runtime_force_{suspend,resume} as SYSTEM_SLEEP_PM_OPS for
all drivers for the real Exynos DRM hardware modules. This ensures that
the resources will be released for the system PM suspend/resume cycle.
Exynos DRM core already takes care of suspending the whole display pipeline
before PM callbacks of the real devices are called.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Marek Szyprowski [Mon, 11 Jun 2018 12:24:59 +0000 (14:24 +0200)]
drm/exynos: Suspend/resume display pipeline as early/late as possible
In the current code, exynos_drm_suspend() function is called after all
real devices (CRTCs, Encoders, etc) are suspended, because Exynos DRM
virtual platform device is created as last device in the system (as
a part of DRM registration). None of the devices for real hardware
modules has its own system suspend/resume callbacks, so it doesn't
change any order of the executed code, but it has a side-effect:
runtime PM callbacks for real devices are not executed, because those
devices are considered by PM core as already suspended. This might
cause issues on boards with complex pipelines, where something
depends on the runtime PM state of the given device.
To ensure that exynos_drm_suspend() is called before any suspend
callback from the real devices, assign it to .prepare callback. Same
for exynos_drm_resume(), using .complete callback ensures that all
real devices have been resumed when calling it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
drm/exynos: gem: Simplify access to exynos GEM objects
Replace all calls to exynos_drm_gem_get_{dma_addr,size}, by a simpler
function exynos_drm_gem_get(). This lets the caller to get access to
exynos_drm_gem object and extract any information about GEM object
without searching object tree for getting each parameter.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos G2D driver is the last client of the custom Exynos 'sub-driver'
framework. In the current state it doesn't really resolve any of the
issues it has been designed for, as Exynos DRM is already built only
as a single kernel module. Remove the custom 'sub-driver' framework and
simply use generic component framework also in G2D driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Merge tag 'exynos-drm-fixes-for-v4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next
Fixups
- Fix several problems to IPPv2 merged to mainline recentely.
. An align problem of width size that IPP driver incorrectly
calculated the real buffer size.
. Horizontal and vertical flip problem.
. Per-plane global alpha for XRGB modes.
. Incorrect variant of the YUV modes.
- Fix plane overlapping problem.
. The stange order of overlapping planes on XRGB modes
by setting global alpha value to maximum value.
Cleanup
- Rename a enum type, drm_ipp_size_id, to one specific to Exynos,
drm_exynos_ipp_limit_type.
- Replace {un/reference} with {put,get} functions.
. it replaces several reference/unreference functions with Linux
kernel nameing standard.
drm: mali-dp: Report writeback connector as connected
Older version of this patch series reported writeback as disconnected
to avoid confusing userspace not aware of writeback connectors.
However, the version that got merged uses a special cap
(DRM_CLIENT_CAP_WRITEBACK_CONNECTORS) for this purpose.
This helps us avoid some special handling of writeback connector
in drm_helper_probe_single_connector_modes, see [1].
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Alex Deucher [Thu, 19 Jul 2018 18:24:33 +0000 (13:24 -0500)]
drm/amdgpu: rework suspend and resume to deal with atomic changes
Use the newly split ip suspend functions to do suspend displays
first (to deal with atomic so that FBs can be unpinned before
attempting to evict vram), then evict vram, then suspend the
other IPs. Also move the non-DC pinning code to only be
called in the non-DC cases since atomic should take care of
DC.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107065 Fixes: e00fb85 drm: Stop updating plane->crtc/fb/old_fb on atomic drivers Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 19 Jul 2018 18:10:07 +0000 (13:10 -0500)]
drm/amdgpu: split ip suspend into 2 phases
We need to do some IPs earlier to deal with ordering issues
similar to how resume is split into two phases. Do DCE first
to deal with atomic, then do the rest.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix warning in dma_fence_is_later on resume from S3.
Problem:
amdgpu_ttm_set_buffer_funcs_status destroys adev->mman.entity on suspend
without releasing adev->mman.bdev.man[TTM_PL_VRAM].move fence
so on resume the new drm_sched_entity.fence_context causes
the warning against the old fence context which is different.
Fix:
When destroying sched_entity in amdgpu_ttm_set_buffer_funcs_status
release man->move and set the pointer to NULL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Fri, 20 Jul 2018 11:56:50 +0000 (17:26 +0530)]
drm/amdgpu: use drm_fb helper for console_(un)lock
This patch removes the usage of console_(un)lock
by replacing drm_fb_helper_set_suspend() to
drm_fb_helper_set_suspend_unlocked() which locks and
unlocks the console instead of locking ourselves.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 17 Jul 2018 12:18:04 +0000 (20:18 +0800)]
drm/amd/display: Convert 10kHz clks from PPLib into kHz
Except special naming as *_in_khz, The default clock unit in powerplay
is in 10KHz. so need to * 10 as expecting clock frequency in display
is in kHz.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 17 Jul 2018 10:31:50 +0000 (18:31 +0800)]
drm/amd/pp: Set Max clock level to display by default
avoid the error in dmesg:
[drm:dm_pp_get_static_clocks]
*ERROR* DM_PPLIB: invalid powerlevel state: 0!
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Wed, 18 Jul 2018 08:06:26 +0000 (13:36 +0530)]
drm/amdgpu: lock and unlock console only for amdgpu_fbdev_set_suspend [V5]
[Why]
While the console_lock is held, console output will be buffered, till
its unlocked it wont be emitted, hence its ideal to unlock sooner to enable
debugging/detecting/fixing of any issue in the remaining sequence of events
in resume path.
The concern here is about consoles other than fbcon on the device,
e.g. a serial console
[How]
This patch restructures the console_lock, console_unlock around
amdgpu_fbdev_set_suspend() and moves this new block appropriately.
V2: Kept amdgpu_fbdev_set_suspend after pci_set_power_state
V3: Updated the commit message to clarify the real concern that this patch
addresses.
V4: code clean-up.
V5: fixed return value
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Thu, 19 Jul 2018 18:17:30 +0000 (14:17 -0400)]
drm/amd/display: Drop unused backlight functions in DM
These are only ever called for non-DC code.
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Fri, 20 Jul 2018 04:30:18 +0000 (14:30 +1000)]
Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
projects / mirror_ubuntu-eoan-kernel.git / log