Merge tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of hwmon bug fixes:
- Update k8temp documentation URL
- Register address fixes in nct6775 driver
- Fix potential division by zero in occ driver"
* tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k8temp) documentation: update URL of datasheet
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
hwmon: (occ) Fix division by zero issue
Merge tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki
"These fix two issues related to the RAPL MMIO interface support added
recently and one cpufreq driver issue.
Specifics:
- Initialize the power capping subsystem and the RAPL driver earlier
in case the int340X thermal driver is built-in and attempts to
register an MMIO interface for RAPL which must not happen before
the requisite infrastructure is ready (Zhang Rui)
- Fix possible use-after-free in the pasemi cpufreq driver (Wen
Yang)"
* tag 'pm-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
int340X/processor_thermal_device: Fix proc_thermal_rapl_remove()
powercap: Invoke powercap_init() and rapl_init() earlier
Merge tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Four minor RISC-V-related changes:
- Add support for the new clone3 syscall for RV64, relying on the
generic support
- Add DT data for the gigabit Ethernet controller on the SiFive FU540
and the HiFive Unleashed board
- Update MAINTAINERS to add me to the arch/riscv maintainers' list
- Add support for PCIe message-signaled interrupts by reusing the
generic header file"
* tag 'riscv/for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT node for SiFive FU540 Ethernet controller driver
riscv: include generic support for MSI irqdomains
MAINTAINERS: Add Paul as a RISC-V maintainer
riscv: enable sys_clone3 syscall for rv64
The access() (and faccessat()) credentials change can cause an
unnecessary load on the RCU machinery because every access() call ends
up freeing the temporary access credential using RCU.
This isn't really noticeable on small machines, but if you have hundreds
of cores you can cause huge slowdowns due to RCU storms.
It's easy to avoid: the temporary access crededntials aren't actually
normally accessed using RCU at all, so we can avoid the whole issue by
just marking them as such.
* access-creds:
access: avoid the RCU grace period for the temporary subjective credentials
access: avoid the RCU grace period for the temporary subjective credentials
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.
The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.
Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.
But it turns out that all of this is entirely unnecessary. Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all. Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.
So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this). We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.
Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards. It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.
It is possible that we should just remove the whole RCU markings for
->cred entirely. Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.
But this is a "minimal semantic changes" change for the immediate
problem.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of non-regression fixes that have accumulated since the
start of the merge window.
- A fix for a user triggerable oops on machines where transactional
memory is disabled, eg. Power9 bare metal, Power8 with TM disabled
on the command line, or all Power7 or earlier machines.
- Three fixes for handling of PMU and power saving registers when
running nested KVM on Power9.
- Two fixes for bugs found while stress testing the XIVE interrupt
controller code, also on Power9.
- A fix to allow guests to boot under Qemu/KVM on Power9 using the
the Hash MMU with >= 1TB of memory.
- Two fixes for bugs in the recent DMA cleanup, one of which could
lead to checkstops.
- And finally three fixes for the PAPR SCM nvdimm driver.
Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater,
Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling,
Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar
Singh, Vaibhav Jain"
* tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
powerpc/pseries: Update SCM hcall op-codes in hvcall.h
powerpc/tm: Fix oops on sigreturn on systems without TM
powerpc/dma: Fix invalid DMA mmap behavior
KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA
KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries
powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR
KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting
powerpc/mm: Limit rma_size to 1TB when running without HV mode
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes, a pvspinlock optimization, and documentation moving"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Documentation: move Documentation/virtual to Documentation/virt
KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
KVM: X86: Dynamically allocate user_fpu
KVM: X86: Fix fpu state crash in kvm guest
Revert "kvm: x86: Use task structs fpu field for user"
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
Wanpeng Li [Wed, 24 Jul 2019 09:43:13 +0000 (17:43 +0800)]
KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks)
introduces hybrid PV queued/unfair locks
- queued mode (no starvation)
- unfair mode (good performance on not heavily contended lock)
The lock waiter goes into the unfair mode especially in VMs with over-commit
vCPUs since increaing over-commitment increase the likehood that the queue
head vCPU may have been preempted and not actively spinning.
However, reschedule queue head vCPU timely to acquire the lock still can get
better performance than just depending on lock stealing in over-subscribe
scenario.
The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue
head vCPU which is involuntary preemption or the one which is voluntary halt
due to fail to acquire the lock after a short spin in the guest.
Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Documentation: move Documentation/virtual to Documentation/virt
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
Eric Auger [Mon, 22 Jul 2019 16:51:49 +0000 (18:51 +0200)]
dma-mapping: use dma_get_mask in dma_addressing_limited
We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Passing 0 to cpuhp_remove_state() triggers the BUG_ON() in
__cpuhp_remove_state_cpuslocked() and the argument passed to
powercap_unregister_control_type() is expected to be a valid
pointer, so avoid calling these functions with incorrect
arguments from proc_thermal_rapl_remove().
Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com>
DT node for SiFive FU540-C000 GEMGXL Ethernet controller driver added
Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Cc: Andrew Lunn <andrew@lunn.ch>
[paul.walmsley@sifive.com: changed "phy1" to "phy0" at Andrew Lunn's
suggestion] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Wesley Terpstra [Mon, 20 May 2019 17:29:26 +0000 (10:29 -0700)]
riscv: include generic support for MSI irqdomains
Some RISC-V systems include PCIe host controllers that support PCIe
message-signaled interrupts. For this to work on Linux, we need to
enable PCI_MSI_IRQ_DOMAIN and define struct msi_alloc_info. Support
for the latter is enabled by including the architecture-generic msi.h
include.
Signed-off-by: Wesley Terpstra <wesley@sifive.com>
[paul.walmsley@sifive.com: split initial patch into one arch/riscv
patch and one drivers/pci patch] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Palmer Dabbelt [Fri, 28 Jun 2019 00:27:53 +0000 (17:27 -0700)]
MAINTAINERS: Add Paul as a RISC-V maintainer
The RISC-V port has grown significantly over the past year. Paul's been
helping out for a while ago. We agreed in person that he'd take over
collecting the patches and submitting the PRs, but it looks like I
forgot to make it official.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preemption Kconfig fix from Thomas Gleixner:
"The PREEMPT_RT stub config renamed PREEMPT to PREEMPT_LL and defined
PREEMPT outside of the menu and made it selectable by both PREEMPT_LL
and PREEMPT_RT.
Stupid me missed that 114 defconfigs select CONFIG_PREEMPT which
obviously can't work anymore. oldconfig builds are affected as well,
but it's more obvious as the user gets asked. [old]defconfig silently
fixes it up and selects PREEMPT_NONE.
Unbreak it by undoing the rename and adding a intermediate config
symbol which is selected by both PREEMPT and PREEMPT_RT. That requires
to chase down a few #ifdefs, but it's better than tweaking 114
defconfigs and annoying users"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
Merge tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes for leaks caused by recently merged patches
- one build fix
- a fix to prevent mixing of incompatible features
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't leak extent_map in btrfs_get_io_geometry()
btrfs: free checksum hash on in close_ctree
btrfs: Fix build error while LIBCRC32C is module
btrfs: inode: Don't compress if NODATASUM or NODATACOW set
Thomas Gleixner [Mon, 22 Jul 2019 15:59:19 +0000 (17:59 +0200)]
sched/rt, Kconfig: Unbreak def/oldconfig with CONFIG_PREEMPT=y
The merge of the CONFIG_PREEMPT_RT stub renamed CONFIG_PREEMPT to
CONFIG_PREEMPT_LL which causes all defconfigs which have CONFIG_PREEMPT=y
set to fall back to CONFIG_PREEMPT_NONE because CONFIG_PREEMPT depends on
the preemption mode choice wich defaults to NONE. This also affects
oldconfig builds.
So rather than changing 114 defconfig files and being an annoyance to
users, revert the rename and select a new config symbol PREEMPTION. That
keeps everything working smoothly and the revelant ifdef's are going to be
fixed up step by step.
Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: a50a3f4b6a31 ("sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"For two regressions in media core:
- v4l2-subdev: fix regression in check_pad()
- videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already
in use"
* tag 'media/v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videodev2.h: change V4L2_PIX_FMT_BGRA444 define: fourcc was already in use
media: v4l2-subdev: fix regression in check_pad()
1) Several netfilter fixes including a nfnetlink deadlock fix from
Florian Westphal and fix for dropping VRF packets from Miaohe Lin.
2) Flow offload fixes from Pablo Neira Ayuso including a fix to restore
proper block sharing.
3) Fix r8169 PHY init from Thomas Voegtle.
4) Fix memory leak in mac80211, from Lorenzo Bianconi.
5) Missing NULL check on object allocation in cxgb4, from Navid
Emamdoost.
6) Fix scaling of RX power in sfp phy driver, from Andrew Lunn.
7) Check that there is actually an ip header to access in skb->data in
VRF, from Peter Kosyh.
8) Remove spurious rcu unlock in hv_netvsc, from Haiyang Zhang.
9) One more tweak the the TCP fragmentation memory limit changes, to be
less harmful to applications setting small SO_SNDBUF values. From
Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
tcp: be more careful in tcp_fragment()
hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()
vrf: make sure skb->data contains ip header to make routing
connector: remove redundant input callback from cn_dev
qed: Prefer pcie_capability_read_word()
igc: Prefer pcie_capability_read_word()
cxgb4: Prefer pcie_capability_read_word()
be2net: Synchronize be_update_queues with dev_watchdog
bnx2x: Prevent load reordering in tx completion processing
net: phy: sfp: hwmon: Fix scaling of RX power
net: sched: verify that q!=NULL before setting q->flags
chelsio: Fix a typo in a function name
allocate_flower_entry: should check for null deref
net: hns3: typo in the name of a constant
kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.
tipc: Fix a typo
mac80211: don't warn about CW params when not using them
mac80211: fix possible memory leak in ieee80211_assign_beacon
nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN
nl80211: fix VENDOR_CMD_RAW_DATA
...
There is a race between reading task->exit_state in pidfd_poll and
writing it after do_notify_parent calls do_notify_pidfd. Expected
sequence of events is:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
tsk->exit_state = EXIT_DEAD
pidfd_poll
if (tsk->exit_state)
However nothing prevents the following sequence:
CPU 0 CPU 1
------------------------------------------------
exit_notify
do_notify_parent
do_notify_pidfd
pidfd_poll
if (tsk->exit_state)
tsk->exit_state = EXIT_DEAD
This causes a polling task to wait forever, since poll blocks because
exit_state is 0 and the waiting task is not notified again. A stress
test continuously doing pidfd poll and process exits uncovered this bug.
To fix it, we make sure that the task's exit_state is always set before
calling do_notify_pidfd.
Fixes: b53b0b9d9a6 ("pidfd: add polling support") Cc: kernel-team@android.com Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20190717172100.261204-1-joel@joelfernandes.org
[christian@brauner.io: adapt commit message and drop unneeded changes from wait_task_zombie] Signed-off-by: Christian Brauner <christian@brauner.io>
Vaibhav Jain [Sat, 29 Jun 2019 16:06:10 +0000 (21:36 +0530)]
powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
In some cases initial bind of scm memory for an lpar can fail if
previously it wasn't released using a scm-unbind hcall. This situation
can arise due to panic of the previous kernel or forced lpar
fadump. In such cases the H_SCM_BIND_MEM return a H_OVERLAP error.
To mitigate such cases the patch updates papr_scm_probe() to force a
call to drc_pmem_unbind() in case the initial bind of scm memory fails
with EBUSY error. In case scm-bind operation again fails after the
forced scm-unbind then we follow the existing error path. We also
update drc_pmem_bind() to handle the H_OVERLAP error returned by phyp
and indicate it as a EBUSY error back to the caller.
Suggested-by: "Oliver O'Halloran" <oohall@gmail.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190629160610.23402-4-vaibhav@linux.ibm.com
Vaibhav Jain [Sat, 29 Jun 2019 16:06:09 +0000 (21:36 +0530)]
powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
The new hcall named H_SCM_UNBIND_ALL has been introduce that can
unbind all or specific scm memory assigned to an lpar. This is
more efficient than using H_SCM_UNBIND_MEM as currently we don't
support partial unbind of scm memory.
Hence this patch proposes following changes to drc_pmem_unbind():
* Update drc_pmem_unbind() to replace hcall H_SCM_UNBIND_MEM to
H_SCM_UNBIND_ALL.
* Update drc_pmem_unbind() to handles cases when PHYP asks the guest
kernel to wait for specific amount of time before retrying the
hcall via the 'LONG_BUSY' return value.
* Ensure appropriate error code is returned back from the function
in case of an error.
Vaibhav Jain [Sat, 29 Jun 2019 16:06:08 +0000 (21:36 +0530)]
powerpc/pseries: Update SCM hcall op-codes in hvcall.h
Update the hvcalls.h to include op-codes for new hcalls introduce to
manage SCM memory. Also update existing hcall definitions to reflect
current papr specification for SCM.
The removed hcall op-codes H_SCM_MEM_QUERY, H_SCM_BLOCK_CLEAR were
transient proposals and there support was never implemented by
Power-VM nor they were used anywhere in Linux kernel. Hence we don't
expect anyone to be impacted by this change.
Wanpeng Li [Mon, 22 Jul 2019 04:26:21 +0000 (12:26 +0800)]
KVM: X86: Dynamically allocate user_fpu
After reverting commit 240c35a3783a (kvm: x86: Use task structs fpu field
for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3)
is the order at which allocations are deemed costly to service. In serveless
scenario, one host can service hundreds/thoudands firecracker/kata-container
instances, howerver, new instance will fail to launch after memory is too
fragmented to allocate kvm_vcpu struct on host, this was observed in some
cloud provider product environments.
This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my
Skylake server.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Mon, 22 Jul 2019 04:26:20 +0000 (12:26 +0800)]
KVM: X86: Fix fpu state crash in kvm guest
The idea before commit 240c35a37 (which has just been reverted)
was that we have the following FPU states:
userspace (QEMU) guest
---------------------------------------------------------------------------
processor vcpu->arch.guest_fpu
>>> KVM_RUN: kvm_load_guest_fpu
vcpu->arch.user_fpu processor
>>> preempt out
vcpu->arch.user_fpu current->thread.fpu
>>> preempt in
vcpu->arch.user_fpu processor
>>> back to userspace
>>> kvm_put_guest_fpu
processor vcpu->arch.guest_fpu
---------------------------------------------------------------------------
With the new lazy model we want to get the state back to the processor
when schedule in from current->thread.fpu.
Reported-by: Thomas Lambertz <mail@thomaslambertz.de> Reported-by: anthony <antdev66@gmail.com> Tested-by: anthony <antdev66@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lambertz <mail@thomaslambertz.de> Cc: anthony <antdev66@gmail.com> Cc: stable@vger.kernel.org Fixes: 5f409e20b (x86/fpu: Defer FPU state load until return to userspace) Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Add a comment in front of the warning. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 22 Jul 2019 11:31:27 +0000 (13:31 +0200)]
Revert "kvm: x86: Use task structs fpu field for user"
This reverts commit 240c35a3783ab9b3a0afaba0dde7291295680a6b
("kvm: x86: Use task structs fpu field for user", 2018-11-06).
The commit is broken and causes QEMU's FPU state to be destroyed
when KVM_RUN is preempted.
Fixes: 240c35a3783a ("kvm: x86: Use task structs fpu field for user") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka [Sun, 21 Jul 2019 11:52:18 +0000 (13:52 +0200)]
KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
Letting this pend may cause nested_get_vmcs12_pages to run against an
invalid state, corrupting the effective vmcs of L1.
This was triggerable in QEMU after a guest corruption in L2, followed by
a L1 reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 7f7f1ba33cf2 ("KVM: x86: do not load vmcs12 pages while still in SMM") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eric Dumazet [Fri, 19 Jul 2019 18:52:33 +0000 (11:52 -0700)]
tcp: be more careful in tcp_fragment()
Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.
We should allow these flows to make progress.
This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.
It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15
Note for < 4.15 backports :
tcp_rtx_queue_tail() will probably look like :
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrew Prout <aprout@ll.mit.edu> Tested-by: Andrew Prout <aprout@ll.mit.edu> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Christoph Paasch <cpaasch@apple.com> Cc: Jonathan Looney <jtl@netflix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hv_netvsc: Fix extra rcu_read_unlock in netvsc_recv_callback()
There is an extra rcu_read_unlock left in netvsc_recv_callback(),
after a previous patch that removes RCU from this function.
This patch removes the extra RCU unlock.
Fixes: 345ac08990b8 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Neuling [Fri, 19 Jul 2019 05:05:02 +0000 (15:05 +1000)]
powerpc/tm: Fix oops on sigreturn on systems without TM
On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:
The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.
This means any local user can crash the system.
Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.
Found with sigfuz kernel selftest on P9.
This fixes CVE-2019-13648.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9 Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
Lei YU [Thu, 11 Jul 2019 02:44:48 +0000 (10:44 +0800)]
hwmon: (occ) Fix division by zero issue
The code in occ_get_powr_avg() invokes div64_u64() without checking the
divisor. In case the divisor is zero, kernel gets an "Division by zero
in kernel" error.
Check the divisor and make it return 0 if the divisor is 0.
Peter Kosyh [Fri, 19 Jul 2019 08:11:47 +0000 (11:11 +0300)]
vrf: make sure skb->data contains ip header to make routing
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).
Case:
1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.
So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.
Signed-off-by: Peter Kosyh <p.kosyh@gmail.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frederick Lawler [Thu, 18 Jul 2019 02:07:42 +0000 (21:07 -0500)]
qed: Prefer pcie_capability_read_word()
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frederick Lawler [Thu, 18 Jul 2019 02:07:39 +0000 (21:07 -0500)]
igc: Prefer pcie_capability_read_word()
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Frederick Lawler [Thu, 18 Jul 2019 02:07:36 +0000 (21:07 -0500)]
cxgb4: Prefer pcie_capability_read_word()
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Thu, 18 Jul 2019 01:42:18 +0000 (10:42 +0900)]
be2net: Synchronize be_update_queues with dev_watchdog
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an
ethtool set_channels operation is started. be_tx_timeout(), which dumps
some queue structures, is not written to run concurrently with
be_update_queues(), which frees/allocates those queues structures. Add some
synchronization between the two.
Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Brian King [Mon, 15 Jul 2019 21:41:50 +0000 (16:41 -0500)]
bnx2x: Prevent load reordering in tx completion processing
This patch fixes an issue seen on Power systems with bnx2x which results
in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb
pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons
load in bnx2x_tx_int. Adding a read memory barrier resolves the issue.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Sun, 21 Jul 2019 16:50:08 +0000 (18:50 +0200)]
net: phy: sfp: hwmon: Fix scaling of RX power
The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.
With this change in place, sensors(1) and ethtool -m agree:
sff2-isa-0000
Adapter: ISA adapter
in0: +3.23 V
temp1: +33.1 C
power1: 270.00 uW
power2: 200.00 uW
curr1: +0.01 A
Laser output power : 0.2743 mW / -5.62 dBm
Receiver signal average optical power : 0.2014 mW / -6.96 dBm
Reported-by: chris.healy@zii.aero Signed-off-by: Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by: David S. Miller <davem@davemloft.net>
net: sched: verify that q!=NULL before setting q->flags
In function int tc_new_tfilter() q pointer can be NULL when adding filter
on a shared block. With recent change that resets TCQ_F_CAN_BYPASS after
filter creation, following NULL pointer dereference happens in case parent
block is shared:
allocate_flower_entry: should check for null deref
allocate_flower_entry does not check for allocation success, but tries
to deref the result. I only moved the spin_lock under null check, because
the caller is checking allocation's status at line 652.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Sowden [Sun, 21 Jul 2019 11:31:05 +0000 (12:31 +0100)]
kbuild: add net/netfilter/nf_tables_offload.h to header-test blacklist.
net/netfilter/nf_tables_offload.h includes net/netfilter/nf_tables.h
which is itself on the blacklist.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jeremy Sowden <jeremy@azazel.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 21 Jul 2019 18:39:05 +0000 (11:39 -0700)]
Merge tag 'mac80211-for-davem-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have a handful of fixes:
* ignore bad CW parameters if we aren't using them,
instead of warning
* fix operation (and then build) with the new netlink vendor
command policy requirement
* fix a memory leak in an error path when setting beacons
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"Fix several warnings/errors in validation of binding schemas"
* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two fixes for stable, one that had dependency on earlier patch in this
merge window and can now go in, and a perf improvement in SMB3 open"
* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: flush before set-info if we have writeable handles
smb3: optimize open to not send query file internal info
cifs: copy_file_range needs to strip setuid bits and update timestamps
CIFS: fix deadlock in cached root handling
Qian Cai [Thu, 11 Jul 2019 16:17:45 +0000 (12:17 -0400)]
iommu/amd: fix a crash in iova_magazine_free_pfns
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.
Mike Rapoport [Tue, 30 Apr 2019 14:27:50 +0000 (17:27 +0300)]
hexagon: switch to generic version of pte allocation
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.
Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
flush_tlb_all_local() flushes the ITLB and DTLB of the CPU.
In case the machine does not have separate ITLBs and DTLBs, use the
alternative functionality to replace the code which flushes the ITLB
with nops while keeping the code which flushes the DTLB.
Sven Schnelle [Sun, 21 Jul 2019 09:00:39 +0000 (11:00 +0200)]
parisc: add kprobe_fault_handler()
Add kprobe_fault_handler() to fix compilation for PA-RISC.
On PA-RISC we actually don't need that function as the recovery counter
is restored after interrupt. See the PA-RISC 2.0 Architecture Manual,
pg. 4-8, Figure 4-4: "Interruption Processing".
Fixes: b98cca444d28 ("mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()") Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
Rob Herring [Tue, 16 Jul 2019 21:34:40 +0000 (15:34 -0600)]
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property
Add the missing 'clocks' properties to the examples to fix the errors.
Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.
Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Mon, 15 Jul 2019 22:48:41 +0000 (16:48 -0600)]
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short
Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
The Aspeed pinctl schema have errors in the 'compatible' schema:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements
Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.
Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Wed, 26 Jun 2019 23:57:59 +0000 (17:57 -0600)]
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.
The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Wed, 3 Jul 2019 20:17:06 +0000 (14:17 -0600)]
dt-bindings: Ensure child nodes are of type 'object'
Properties which are child node definitions need to have an explict
type. Otherwise, a matching (DT) property can silently match when an
error is desired. Fix this up tree-wide. Once this is fixed, the
meta-schema will enforce this on any child node definitions.
Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
Brian Norris [Thu, 18 Jul 2019 01:57:12 +0000 (18:57 -0700)]
mac80211: don't warn about CW params when not using them
ieee80211_set_wmm_default() normally sets up the initial CW min/max for
each queue, except that it skips doing this if the driver doesn't
support ->conf_tx. We still end up calling drv_conf_tx() in some cases
(e.g., ieee80211_reconfig()), which also still won't do anything
useful...except it complains here about the invalid CW parameters.
Let's just skip the WARN if we weren't going to do anything useful with
the parameters.
Thomas Voegtle [Sat, 20 Jul 2019 17:01:22 +0000 (19:01 +0200)]
r8169: fix RTL8168g PHY init
This fixes a copy&paste error in the original patch. Setting the wrong
register resulted in massive packet loss on some systems.
Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions") Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions:
- force unencrypted dma-coherent buffers if encryption bit can't fit
into the dma coherent mask (Tom Lendacky)
- avoid limiting request size if swiotlb is not used (me)
- fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang
Duan)"
* tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device
dma-direct: only limit the mapping size if swiotlb could be used
dma-mapping: add a dma_addressing_limited helper
dma-direct: Force unencrypted DMA under SME for certain DMA masks
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 specific fixes and updates:
- The CR2 corruption fixes which store CR2 early in the entry code
and hand the stored address to the fault handlers.
- Revert a forgotten leftover of the dropped FSGSBASE series.
- Plug a memory leak in the boot code.
- Make the Hyper-V assist functionality robust by zeroing the shadow
page.
- Remove a useless check for dead processes with LDT
- Update paravirt and VMware maintainers entries.
- A few cleanup patches addressing various compiler warnings"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Prevent clobbering of saved CR2 value
x86/hyper-v: Zero out the VP ASSIST PAGE on allocation
x86, boot: Remove multiple copy of static function sanitize_boot_params()
x86/boot/compressed/64: Remove unused variable
x86/boot/efi: Remove unused variables
x86/mm, tracing: Fix CR2 corruption
x86/entry/64: Update comments and sanity tests for create_gap
x86/entry/64: Simplify idtentry a little
x86/entry/32: Simplify common_exception
x86/paravirt: Make read_cr2() CALLEE_SAVE
MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
x86/process: Delete useless check for dead process with LDT
x86: math-emu: Hide clang warnings for 16-bit overflow
x86/e820: Use proper booleans instead of 0/1
x86/apic: Silence -Wtype-limits compiler warnings
x86/mm: Free sme_early_buffer after init
x86/boot: Fix memory leak in default_get_smp_config()
Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling updates from Thomas Gleixner:
"A set of perf improvements and fixes:
perf db-export:
- Improvements in how COMM details are exported to databases for post
processing and use in the sql-viewer.py UI.
- Export switch events to the database.
BPF:
- Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just
like selftests/bpf/bpf_rlimit.h do, which makes errors due to
exhaustion of this limit, which are kinda cryptic (EPERM sometimes)
less frequent.
perf version:
- Fix segfault due to missing OPT_END(), noticed on PowerPC.
perf vendor events:
- Add JSON files for IBM s/390 machine type 8561.
perf cs-etm (ARM):
- Fix two cases of error returns not bing done properly: Invalid
ERR_PTR() use and loss of propagation error codes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
perf version: Fix segfault due to missing OPT_END()
perf vendor events s390: Add JSON files for machine type 8561
perf cs-etm: Return errcode in cs_etm__process_auxtrace_info()
perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info
perf scripts python: export-to-postgresql.py: Export switch events
perf scripts python: export-to-sqlite.py: Export switch events
perf db-export: Export switch events
perf db-export: Factor out db_export__threads()
perf script: Add scripting operation process_switch()
perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column
perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons
perf scripts python: export-to-postgresql.py: Add has_calls column to comms table
perf scripts python: export-to-sqlite.py: Add has_calls column to comms table
perf db-export: Also export thread's current comm
perf db-export: Factor out db_export__comm()
perf scripts python: export-to-postgresql.py: Export comm details
perf scripts python: export-to-sqlite.py: Export comm details
perf db-export: Export comm details
perf db-export: Fix a white space issue in db_export__sample()
perf db-export: Move export__comm_thread into db_export__sample()
...
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
- A collection of objtool fixes which address recent fallout partially
exposed by newer toolchains, clang, BPF and general code changes.
- Force USER_DS for user stack traces
[ Note: the "objtool fixes" are not all to objtool itself, but for
kernel code that triggers objtool warnings.
Things like missing function size annotations, or code that confuses
the unwinder etc. - Linus]
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
objtool: Support conditional retpolines
objtool: Convert insn type to enum
objtool: Fix seg fault on bad switch table entry
objtool: Support repeated uses of the same C jump table
objtool: Refactor jump table code
objtool: Refactor sibling call detection logic
objtool: Do frame pointer check before dead end check
objtool: Change dead_end_function() to return boolean
objtool: Warn on zero-length functions
objtool: Refactor function alias logic
objtool: Track original function across branches
objtool: Add mcsafe_handle_tail() to the uaccess safe list
bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()
x86/uaccess: Remove redundant CLACs in getuser/putuser error paths
x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail()
x86/uaccess: Remove ELF function annotation from copy_user_handle_tail()
x86/head/64: Annotate start_cpu0() as non-callable
x86/entry: Fix thunk function ELF sizes
x86/kvm: Don't call kvm_spurious_fault() from .fixup
x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2
...
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner:
"The real-time preemption patch set exists for almost 15 years now and
while the vast majority of infrastructure and enhancements have found
their way into the mainline kernel, the final integration of RT is
still missing.
Over the course of the last few years, we have worked on reducing the
intrusivenness of the RT patches by refactoring kernel infrastructure
to be more real-time friendly. Almost all of these changes were
benefitial to the mainline kernel on their own, so there was no
objection to integrate them.
Though except for the still ongoing printk refactoring, the remaining
changes which are required to make RT a first class mainline citizen
are not longer arguable as immediately beneficial for the mainline
kernel. Most of them are either reordering code flows or adding RT
specific functionality.
But this now has hit a wall and turned into a classic hen and egg
problem:
Maintainers are rightfully wary vs. these changes as they make only
sense if the final integration of RT into the mainline kernel takes
place.
Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT
will be fully integrated into the mainline kernel. The final
integration of the missing bits and pieces will be of course done with
the same careful approach as we have used in the past.
While I'm aware that you are not entirely enthusiastic about that, I
think that RT should receive the same treatment as any other widely
used out of tree functionality, which we have accepted into mainline
over the years.
RT has become the de-facto standard real-time enhancement and is
shipped by enterprise, embedded and community distros. It's in use
throughout a wide range of industries: telecommunications, industrial
automation, professional audio, medical devices, data acquisition,
automotive - just to name a few major use cases.
RT development is backed by a Linuxfoundation project which is
supported by major stakeholders of this technology. The funding will
continue over the actual inclusion into mainline to make sure that the
functionality is neither introducing regressions, regressing itself,
nor becomes subject to bitrot. There is also a lifely user community
around RT as well, so contrary to the grim situation 5 years ago, it's
a healthy project.
As RT is still a good vehicle to exercise rarely used code paths and
to detect hard to trigger issues, you could at least view it as a QA
tool if nothing else"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- match the directory structure of the linux-libc-dev package to that
of Debian-based distributions
- fix incorrect include/config/auto.conf generation when Kconfig
creates it along with the .config file
- remove misleading $(AS) from documents
- clean up precious tag files by distclean instead of mrproper
- add a new coccinelle patch for devm_platform_ioremap_resource
migration
- refactor module-related scripts to read modules.order instead of
$(MODVERDIR)/*.mod files to get the list of created modules
- remove MODVERDIR
- update list of header compile-test
- add -fcf-protection=none flag to avoid conflict with the retpoline
flags when CONFIG_RETPOLINE=y
- misc cleanups
* tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add -fcf-protection=none when using retpoline flags
kbuild: update compile-test header list for v5.3-rc1
kbuild: split out *.mod out of {single,multi}-used-m rules
kbuild: remove 'prepare1' target
kbuild: remove the first line of *.mod files
kbuild: create *.mod with full directory path and remove MODVERDIR
kbuild: export_report: read modules.order instead of .tmp_versions/*.mod
kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod
scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
kbuild: remove duplication from modules.order in sub-directories
kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
kbuild: do not create empty modules.order in the prepare stage
coccinelle: api: add devm_platform_ioremap_resource script
kbuild: compile-test headers listed in header-test-m as well
kbuild: remove unused hostcc-option
kbuild: remove tag files by distclean instead of mrproper
kbuild: add --hash-style= and --build-id unconditionally
kbuild: get rid of misleading $(AS) from documents
...
Merge branch 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache and mountpoint updates from Al Viro:
"Saner handling of refcounts to mountpoints.
Transfer the counting reference from struct mount ->mnt_mountpoint
over to struct mountpoint ->m_dentry. That allows us to get rid of the
convoluted games with ordering of mount shutdowns.
The cost is in teaching shrink_dcache_{parent,for_umount} to cope with
mixed-filesystem shrink lists, which we'll also need for the Slab
Movable Objects patchset"
* 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
switch the remnants of releasing the mountpoint away from fs_pin
get rid of detach_mnt()
make struct mountpoint bear the dentry reference to mountpoint, not struct mount
Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists
fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt()
__detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore
nfs: dget_parent() never returns NULL
ceph: don't open-code the check for dead lockref
Thomas Gleixner [Sat, 20 Jul 2019 08:56:41 +0000 (10:56 +0200)]
x86/entry/64: Prevent clobbering of saved CR2 value
The recent fix for CR2 corruption introduced a new way to reliably corrupt
the saved CR2 value.
CR2 is saved early in the entry code in RDX, which is the third argument to
the fault handling functions. But it missed that between saving and
invoking the fault handler enter_from_user_mode() can be called. RDX is a
caller saved register so the invoked function can freely clobber it with
the obvious consequences.
The TRACE_IRQS_OFF call is safe as it calls through the thunk which
preserves RDX, but TRACE_IRQS_OFF_DEBUG is not because it also calls into
C-code outside of the thunk.
Store CR2 in R12 instead which is a callee saved register and move R12 to
RDX just before calling the fault handler.
Peter Zijlstra [Thu, 18 Jul 2019 09:20:09 +0000 (11:20 +0200)]
smp: Warn on function calls from softirq context
It's clearly documented that smp function calls cannot be invoked from
softirq handling context. Unfortunately nothing enforces that or emits a
warning.
A single function call can be invoked from softirq context only via
smp_call_function_single_async().
The only legit context is task context, so add a warning to that effect.
Eric Hankland [Thu, 18 Jul 2019 18:38:18 +0000 (11:38 -0700)]
KVM: x86: Add fixed counters to PMU filter
Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist
fixed counters.
Signed-off-by: Eric Hankland <ehankland@google.com>
[No need to check padding fields for zero. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 19 Jul 2019 16:41:10 +0000 (18:41 +0200)]
KVM: nVMX: do not use dangling shadow VMCS after guest reset
If a KVM guest is reset while running a nested guest, free_nested will
disable the shadow VMCS execution control in the vmcs01. However,
on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync
the VMCS12 to the shadow VMCS which has since been freed.
This causes a vmptrld of a NULL pointer on my machime, but Jan reports
the host to hang altogether. Let's see how much this trivial patch fixes.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Thu, 18 Jul 2019 05:35:14 +0000 (13:35 +0800)]
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
If a perf_event creation fails due to any reason of the host perf
subsystem, it has no chance to log the corresponding event for guest
which may cause abnormal sampling data in guest result. In debug mode,
this message helps to understand the state of vPMC and we may not
limit the number of occurrences but not in a spamming style.
Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Thu, 18 Jul 2019 11:39:07 +0000 (19:39 +0800)]
KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup
Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Thu, 18 Jul 2019 11:39:06 +0000 (19:39 +0800)]
KVM: Boost vCPUs that are delivering interrupts
Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during
vcpu wakeup and interrupt delivery), we want to also boost not just
lock holders but also vCPUs that are delivering interrupts. Most
smp_call_function_many calls are synchronous, so the IPI target vCPUs
are also good yield candidates. This patch introduces vcpu->ready to
boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do
not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken
into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected
(VT-d PI handles voluntary preemption separately, in pi_pre_block).
Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / mirror_ubuntu-kernels.git / log