Mike Snitzer [Tue, 5 Jul 2022 20:12:27 +0000 (16:12 -0400)]
dm table: audit all dm_table_get_target() callers
All callers of dm_table_get_target() are expected to do proper bounds
checking on the index they pass.
Move dm_table_get_target() to dm-core.h to make it extra clear that only
DM core code should be using it. Switch it to be inlined while at it.
Standardize all DM core callers to use the same for loop pattern and
make associated variables as local as possible. Rename some variables
(e.g. s/table/t/ and s/tgt/ti/) along the way.
Ming Lei [Fri, 24 Jun 2022 14:12:55 +0000 (22:12 +0800)]
dm: add two stage requeue mechanism
Commit 61b6e2e5321d ("dm: fix BLK_STS_DM_REQUEUE handling when dm_io
represents split bio") reverted DM core's bio splitting back to using
bio_split()+bio_chain() because it was found that otherwise DM's
BLK_STS_DM_REQUEUE would trigger a live-lock waiting for bio
completion that would never occur.
Restore using bio_trim()+bio_inc_remaining(), like was done in commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting"), but this time with proper handling for the above
scenario that is covered in more detail in the commit header for 61b6e2e5321d.
Solve this issue by adding a two staged dm_io requeue mechanism that
uses the new dm_bio_rewind() via dm_io_rewind():
1) requeue the dm_io into the requeue_list added to struct
mapped_device, and schedule it via new added requeue work. This
workqueue just clones the dm_io->orig_bio (which DM saves and
ensures its end sector isn't modified). dm_io_rewind() uses the
sectors and sectors_offset members of the dm_io that are recorded
relative to the end of orig_bio: dm_bio_rewind()+bio_trim() are
then used to make that cloned bio reflect the subset of the
original bio that is represented by the dm_io that is being
requeued.
2) the 2nd stage requeue is same with original requeue, but
io->orig_bio points to new cloned bio (which matches the requeued
dm_io as described above).
This allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Ming Lei [Fri, 24 Jun 2022 14:12:52 +0000 (22:12 +0800)]
dm: add dm_bio_rewind() API to DM core
Commit 7759eb23fd98 ("block: remove bio_rewind_iter()") removed
a similar API for the following reasons:
```
It is pointed that bio_rewind_iter() is one very bad API[1]:
1) bio size may not be restored after rewinding
2) it causes some bogus change, such as 5151842b9d8732 (block: reset
bi_iter.bi_done after splitting bio)
3) rewinding really makes things complicated wrt. bio splitting
So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.
```
However, saving off a copy of the 32 bytes bio->bi_iter in case rewind
needed isn't efficient because it bloats per-bio-data for what is an
unlikely case. That suggestion also ignores the need to restore
crypto and integrity info.
Add dm_bio_rewind() API for a specific use-case that is much more narrow
than the previous more generic rewind code that was reverted:
1) most bios have a fixed end sector since bio split is done from front
of the bio, if driver just records how many sectors between current
bio's start sector and the original bio's end sector, the original
position can be restored. Keeping the original bio's end sector
fixed is a _hard_ requirement for this interface!
2) if a bio's end sector won't change (usually bio_trim() isn't
called, or in the case of DM it preserves original bio), user can
restore the original position by storing sector offset from the
current ->bi_iter.bi_sector to bio's end sector; together with
saving bio size, only 8 bytes is needed to restore to original
bio.
3) DM's requeue use case: when BLK_STS_DM_REQUEUE happens, DM core
needs to restore to an "original bio" which represents the current
dm_io to be requeued (which may be a subset of the original bio).
By storing the sector offset from the original bio's end sector and
dm_io's size, dm_bio_rewind() can restore such original bio. See
commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting") for more details on how DM does this. Leveraging this,
allows DM core to shift the need for bio cloning from bio-split
time (during IO submission) to the less likely BLK_STS_DM_REQUEUE
handling (after IO completes with that error).
4) Unlike the original rewind API, dm_bio_rewind() doesn't add .bi_done
to bvec_iter and there is no effect on the fast path.
Implement dm_bio_rewind() by factoring out clear helpers that it calls:
dm_bio_integrity_rewind, dm_bio_crypt_rewind and dm_bio_rewind_iter.
DM is able to ensure that dm_bio_rewind() is used safely but, given
the constraint that the bio's end must never change, other
hypothetical future callers may not take the same care. So make
dm_bio_rewind() and all supporting code local to DM to avoid risk of
hypothetical abuse. A "dm_" prefix was added to all functions to avoid
any namespace collisions.
Suggested-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Ming Lei [Fri, 24 Jun 2022 14:12:53 +0000 (22:12 +0800)]
dm: improve BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling
If either BLK_STS_DM_REQUEUE or BLK_STS_AGAIN is returned for POLLED
io, we requeue the original bio into deferred list and kick md->wq to
re-submit it to block layer.
Improve the handling in the following way:
1) Factor out dm_handle_requeue() for handling dm_io requeue.
2) Unify handling for BLK_STS_DM_REQUEUE and BLK_STS_AGAIN: clear
REQ_POLLED for BLK_STS_DM_REQUEUE too, for the sake of simplicity,
given BLK_STS_DM_REQUEUE is very unusual.
3) Queue md->wq explicitly in dm_handle_requeue(), so requeue handling
becomes more robust.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Lift setting disk->ia_ranges from disk_register_independent_access_ranges
into disk_set_independent_access_ranges, and make the behavior the same
for the registered vs non-registered queue cases.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220629062013.1331068-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: move ->ia_ranges from the request_queue to the gendisk
Independent access ranges only matter for file system I/O and are only
valid with a registered gendisk, so move them there.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220629062013.1331068-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a gendisk to the sysfs register/unregister functions and give
them descriptive names. Also move the unregistration helper next
to the one doing the registration.
Add a _hctx postfix to better describe what the functions do, match
the debugfs equivalents and release the old names for functions that
should be using them.
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
block: stop setting the nomerges flags in blk_cleanup_queue
These flags only apply to file system I/O, and all file system I/O is
already drained by del_gendisk and thus can't be in progress when
blk_cleanup_queue is called.
Disallow setting the blk-mq state on any queue that is already dying as
setting the state even then is a bad idea, and remove the now unused
QUEUE_FLAG_DEAD flag.
Use the proper helper to mark a surpise removal, remove the gendisk as
soon as possible when removing the device and implement the ->free_disk
callback to ensure the private data is alive as long as the gendisk has
references.
Jan Kara [Thu, 23 Jun 2022 07:48:34 +0000 (09:48 +0200)]
block: Always initialize bio IO priority on submit
Currently, IO priority set in task's IO context is not reflected in the
bio->bi_ioprio for most IO (only io_uring and direct IO set it). This
results in odd results where process is submitting some bios with one
priority and other bios with a different (unset) priority and due to
differing priorities bios cannot be merged. Make sure bio->bi_ioprio is
always set on bio submission.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-9-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:33 +0000 (09:48 +0200)]
block: Initialize bio priority earlier
Bio's IO priority needs to be initialized before we try to merge the bio
with other bios. Otherwise we could merge bios which would otherwise
receive different IO priorities leading to possible QoS issues.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-8-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:32 +0000 (09:48 +0200)]
blk-ioprio: Convert from rqos policy to direct call
Convert blk-ioprio handling from a rqos policy to a direct call from
blk_mq_submit_bio(). Firstly, blk-ioprio is not much of a rqos policy
anyway, it just needs a hook in bio submission path to set the bio's IO
priority. Secondly, the rqos .track hook gets actually called too late
for blk-ioprio purposes and introducing a special rqos hook just for
blk-ioprio looks even weirder.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-7-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:31 +0000 (09:48 +0200)]
blk-ioprio: Remove unneeded field
blkcg->ioprio_set field is not really useful except for avoiding
possibly more expensive checks inside blkcg_ioprio_track(). The check
for blkcg->prio_policy being equal to POLICY_NO_CHANGE does the same
service so just remove the ioprio_set field and replace the check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-6-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:30 +0000 (09:48 +0200)]
block: Fix handling of tasks without ioprio in ioprio_get(2)
ioprio_get(2) can be asked to return the best IO priority from several
tasks (IOPRIO_WHO_PGRP, IOPRIO_WHO_USER). Currently the call treats
tasks without set IO priority as having priority
IOPRIO_CLASS_BE/IOPRIO_BE_NORM however this does not really reflect the
IO priority the task will get (which depends on task's nice value).
Fix the code to use the real IO priority task's IO will use. We have to
modify code for ioprio_get(IOPRIO_WHO_PROCESS) to keep returning
IOPRIO_CLASS_NONE priority for tasks without set IO priority as a
special case to maintain userspace visible API.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220623074840.5960-5-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:29 +0000 (09:48 +0200)]
block: Make ioprio_best() static
Nobody outside of block/ioprio.c uses it.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-4-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:28 +0000 (09:48 +0200)]
block: Generalize get_current_ioprio() for any task
get_current_ioprio() operates only on current task. We will need the
same functionality for other tasks as well. Generalize
get_current_ioprio() for that and also move the bulk out of the header
file because it is large enough.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-3-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:27 +0000 (09:48 +0200)]
block: Return effective IO priority from get_current_ioprio()
get_current_ioprio() is used to initialize IO priority of various
requests. As such it should be returning the effective IO priority of
the task (i.e., reflecting the fact that unset IO priority should get
set based on task's CPU priority) so that the conversion is concentrated
in one place.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-2-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 23 Jun 2022 07:48:26 +0000 (09:48 +0200)]
block: fix default IO priority handling again
Commit e70344c05995 ("block: fix default IO priority handling")
introduced an inconsistency in get_current_ioprio() that tasks without
IO context return IOPRIO_DEFAULT priority while tasks with freshly
allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority.
Tasks without IO context used to be rare before 5a9d041ba2f6 ("block:
move io_context creation into where it's needed") but after this commit
they became common because now only BFQ IO scheduler setups task's IO
context. Similar inconsistency is there for get_task_ioprio() so this
inconsistency is now exposed to userspace and userspace will see
different IO priority for tasks operating on devices with BFQ compared
to devices without BFQ. Furthemore the changes done by commit e70344c05995 change the behavior when no IO priority is set for BFQ IO
scheduler which is also documented in ioprio_set(2) manpage:
"If no I/O scheduler has been set for a thread, then by default the I/O
priority will follow the CPU nice value (setpriority(2)). In Linux
kernels before version 2.6.24, once an I/O priority had been set using
ioprio_set(), there was no way to reset the I/O scheduling behavior to
the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to
reset to the default I/O scheduling behavior."
So make sure we default to IOPRIO_CLASS_NONE as used to be the case
before commit e70344c05995. Also cleanup alloc_io_context() to
explicitely set this IO priority for the allocated IO context to avoid
future surprises. Note that we tweak ioprio_best() to maintain
ioprio_get(2) behavior and make this commit easily backportable.
CC: stable@vger.kernel.org Fixes: e70344c05995 ("block: fix default IO priority handling") Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq: Don't disable preemption around __blk_mq_run_hw_queue().
__blk_mq_delay_run_hw_queue() disables preemption to get a stable
current CPU number and then invokes __blk_mq_run_hw_queue() if the CPU
number is part the mask.
__blk_mq_run_hw_queue() acquires a spin_lock_t which is a sleeping lock
on PREEMPT_RT and can't be acquired with disabled preemption.
It is not required for correctness to invoke __blk_mq_run_hw_queue() on
a CPU matching hctx->cpumask. Both (async and direct requests) can run
on a CPU not matching hctx->cpumask.
The CPU mask without disabling preemption and invoking
__blk_mq_run_hw_queue().
Bart Van Assche [Fri, 17 Jun 2022 21:08:59 +0000 (14:08 -0700)]
block: bfq: Fix kernel-doc headers
Fix the following warnings:
block/bfq-cgroup.c:721: warning: Function parameter or member 'bfqg' not described in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:721: warning: Excess function parameter 'blkcg' description in '__bfq_bic_change_cgroup'
block/bfq-cgroup.c:870: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_leaf_entity'
block/bfq-cgroup.c:900: warning: Function parameter or member 'ioprio_class' not described in 'bfq_reparent_active_queues'
get_max_io_size has a very odd choice of variables names and
initialization patterns. Switch to more descriptive names and more
clear initialization of them.
block: open code blk_max_size_offset in blk_rq_get_max_sectors
blk_rq_get_max_sectors always uses q->limits.chunk_sectors as the
chunk_sectors argument, and already checks for max_sectors through the
call to blk_queue_get_max_sectors. That means much of
blk_max_size_offset is not needed and open coding it simplifies the code.
max_io_len always passes an explicitly non-zero chunk_sectors into
blk_max_size_offset. That means much of blk_max_size_offset is not
needed and can be open coded to simplify the code.
Bart Van Assche [Wed, 15 Jun 2022 22:55:49 +0000 (15:55 -0700)]
block: Make blk_mq_get_sq_hctx() select the proper hardware queue type
Since the introduction of blk_mq_get_hctx_type() the operation type in
the second argument of blk_mq_get_hctx_type() matters. The introduction
of blk_mq_get_hctx_type() caused blk_mq_get_sq_hctx() to select a
hardware queue of type HCTX_TYPE_READ instead of HCTX_TYPE_DEFAULT.
Switch to hardware queue type HCTX_TYPE_DEFAULT since HCTX_TYPE_READ
should only be used for read requests.
Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220615225549.1054905-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 15 Jun 2022 22:55:48 +0000 (15:55 -0700)]
block: Rename a blk_mq_map_queue() argument
Before the introduction of blk_mq_get_hctx_type(), blk_mq_map_queue()
only used the flags from its second argument. Since the introduction of
blk_mq_get_hctx_type(), blk_mq_map_queue() uses both the operation and
the flags encoded in that argument. Rename the second argument of
blk_mq_map_queue() to make this clear.
Keith Busch [Fri, 10 Jun 2022 19:58:29 +0000 (12:58 -0700)]
block: relax direct io memory alignment
Use the address alignment requirements from the block_device for direct
io instead of requiring addresses be aligned to the block size. User
space can discover the alignment requirements from the dma_alignment
queue attribute.
User space can specify any hardware compatible DMA offset for each
segment, but every segment length is still required to be a multiple of
the block size.
Keith Busch [Fri, 10 Jun 2022 19:58:27 +0000 (12:58 -0700)]
iov: introduce iov_iter_aligned
The existing iov_iter_alignment() function returns the logical OR of
address and length. For cases where address and length need to be
considered separately, introduce a helper function that a caller can
specificy length and address masks that indicate if the iov is
unaligned.
Keith Busch [Fri, 10 Jun 2022 19:58:20 +0000 (12:58 -0700)]
block: fix infinite loop for invalid zone append
Returning 0 early from __bio_iov_append_get_pages() for the
max_append_sectors warning just creates an infinite loop since 0 means
success, and the bio will never fill from the unadvancing iov_iter. We
could turn the return into an error value, but it will already be turned
into an error value later on, so just remove the warning. Clearly no one
ever hit it anyway.
Fixes: 0512a75b98f84 ("block: Introduce REQ_OP_ZONE_APPEND") Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220610195830.3574005-2-kbusch@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 26 Jun 2022 21:00:55 +0000 (14:00 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Linus Torvalds [Sun, 26 Jun 2022 19:12:25 +0000 (12:12 -0700)]
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
Linus Torvalds [Sun, 26 Jun 2022 17:11:36 +0000 (10:11 -0700)]
Merge tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
Linus Torvalds [Sun, 26 Jun 2022 16:13:51 +0000 (09:13 -0700)]
Merge tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Two bug fixes for the pxa3xx and intelfb drivers:
- pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
- intelfb: Initialize value of stolen size
The other changes are small cleanups, simplifications and
documentation updates to the cirrusfb, skeletonfb, omapfb,
intelfb, au1100fb and simplefb drivers"
* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Remove duplicate 'the' in comment
video: fbdev: omapfb: Align '*' in comment
video: fbdev: simplefb: Check before clk_put() not needed
video: fbdev: au1100fb: Drop unnecessary NULL ptr check
video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
video: fbdev: skeletonfb: Convert to generic power management
video: fbdev: cirrusfb: Remove useless reference to PCI power management
video: fbdev: intelfb: Initialize value of stolen size
video: fbdev: intelfb: Use aperture size from pci_resource_len
video: fbdev: skeletonfb: Fix syntax errors in comments
Linus Torvalds [Sun, 26 Jun 2022 16:08:30 +0000 (09:08 -0700)]
Merge tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
machines
- flush all mappings of a shared anonymous page on PA8800/8900 machines
via flushing the whole data cache. This may slow down such machines
but makes sure that the cache is consistent
* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
parisc: Fix flush_anon_page on PA8800/PA8900
parisc: align '*' in comment in math-emu code
parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
Linus Torvalds [Sun, 26 Jun 2022 15:53:20 +0000 (08:53 -0700)]
Merge tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for a CMA change that broke booting guests with > 2G RAM on
Power8 hosts.
- Fix the RTAS call filter to allow a special case that applications
rely on.
- A change to our execve path, to make the execve syscall exit
tracepoint work.
- Three fixes to wire up our various RNGs earlier in boot so they're
available for use in the initial seeding in random_init().
- A build fix for when KASAN is enabled along with
STRUCTLEAK_BYREF_ALL.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.
* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: wire up rng during setup_arch
powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
powerpc: Enable execve syscall exit tracepoint
powerpc/pseries: wire up rng during setup_arch()
powerpc/microwatt: wire up rng during setup_arch()
powerpc/mm: Move CMA reservations after initmem_init()
Linus Torvalds [Sun, 26 Jun 2022 15:47:28 +0000 (08:47 -0700)]
Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit
- Update the supported arch list in the LLVM document
- Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS
- Avoid false __KSYM___this_module define in include/generated/autoksyms.h
* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Ignore __this_module in gen_autoksyms.sh
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Documentation/llvm: Update Supported Arch table
modpost: fix section mismatch check for exported init/exit sections
Linus Torvalds [Sun, 26 Jun 2022 15:34:52 +0000 (08:34 -0700)]
Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Fixes addressing important multichannel, and reconnect issues.
Multichannel mounts when the server network interfaces changed, or ip
addresses changed, uncovered problems, especially in reconnect, but
the patches for this were held up until recently due to some lock
conflicts that are now addressed.
Included in this set of fixes:
- three fixes relating to multichannel reconnect, dynamically
adjusting the list of server interfaces to avoid problems during
reconnect
- a lock conflict fix related to the above
- two important fixes for negotiate on secondary channels (null
netname can unintentionally cause multichannel to be disabled to
some servers)
- a reconnect fix (reporting incorrect IP address in some cases)"
* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update cifs_ses::ip_addr after failover
cifs: avoid deadlocks while updating iface
cifs: periodically query network interfaces from server
cifs: during reconnect, update interface if necessary
cifs: change iface_list from array to sorted linked list
smb3: use netname when available on secondary channels
smb3: fix empty netname context on secondary channels
tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:
d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs") 0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs") dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit") cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support")
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
This causes these changes:
CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o
LD /tmp/build/perf-urgent/arch/x86/perf-in.o
LD /tmp/build/perf-urgent/arch/perf-in.o
LD /tmp/build/perf-urgent/perf-in.o
LINK /tmp/build/perf-urgent/perf
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID") 2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id") a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces") 3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups") 175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gautam Dawar <gautam.dawar@xilinx.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gang Li [Wed, 22 Jun 2022 03:00:37 +0000 (11:00 +0800)]
perf stat: Enable ignore_missing_thread
perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.
Committer notes:
And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:
ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option")
---
While monitoring a multithread process with pid option, perf sometimes
may return sys_perf_event_open failure with 3(No such process) if any of
the process's threads die before we open the event. However, we want
perf continue monitoring the remaining threads and do not exit with
error.
---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Raul Silvera [Tue, 21 Jun 2022 15:27:25 +0000 (15:27 +0000)]
perf inject: Adjust output data offset for backward compatibility
When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.
This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@intel.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.
Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 21 Jun 2022 12:51:44 +0000 (15:51 +0300)]
perf build-id: Fix caching files with a wrong build ID
Build ID events associate a file name with a build ID. However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
d6d0c7f681fda1d0 ("x86/cpufeatures: Add PerfMonV2 feature bit") 296d5a17e793956f ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") f30903394eb62316 ("x86/cpufeatures: Add virtual TSC_AUX feature bit") 8ad7e8f696951f19 ("x86/fpu/xsave: Support XSAVEC in the kernel") 59bd54a84d15e933 ("x86/tdx: Detect running as a TDX guest in early boot") a77d41ac3a0f41c8 ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Babu Moger <babu.moger@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in:
ecf8eca51f33dbfd ("drm/i915/xehp: Add compute engine ABI") 991b4de3275728fd ("drm/i915/uapi: Add kerneldoc for engine class enum") c94fde8f516610b0 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES") 1c671ad753dbbf5f ("drm/i915/doc: Link query items to their uapi structs") a2e5402691e23269 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc") 462ac1cdf4d7acf1 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc") 034d47b25b2ce627 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB") 78e1fb3112c0ac44 ("drm/i915/uapi: Add query for hwconfig blob")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: John Harrison <John.C.Harrison@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 20 Jun 2022 10:39:04 +0000 (13:39 +0300)]
perf inject: Fix missing free in copy_kcore_dir()
Free string allocated by asprintf().
Fixes: d8fc08550929bb84 ("perf inject: Keep a copy of kcore_dir") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Helge Deller [Sun, 26 Jun 2022 09:50:43 +0000 (11:50 +0200)]
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.
This won't fix all coherency issues with shared mappings but it
seems to work well in practice. I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.
There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.18+
Sami Tolvanen [Thu, 16 Jun 2022 19:57:59 +0000 (19:57 +0000)]
kbuild: Ignore __this_module in gen_autoksyms.sh
Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Steve Muckle <smuckle@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Ramji Jiyani <ramjiyani@google.com>
Fixes: 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Linus Torvalds [Sat, 25 Jun 2022 17:07:36 +0000 (10:07 -0700)]
Merge tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull IIO driver fixes from Greg KH:
"Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
in his pull request to me, so I'll just quote it here below, as that's
the only changes we have right now for the char-misc driver tree:
testing:
- Fix a missing MODULE_LICENSE() warning by restricting possible
build configs.
Various drivers:
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
adi,admv1014:
- Fix dubious x & !y warning.
adi,axi-adc:
- Fix missing of_node_put() in error and normal paths.
aspeed,adc:
- Add missing of_node_put()
fsl,mma8452:
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset
as ACK will be missing (device reset before sending it).
fsl,vf610:
- Fix documentation of in_conversion_mode ABI.
iio-trig-sysfs:
- Ensure irq work has finished before freeing the trigger.
invensense,mpu3050:
- Disable regulators in error path.
invensense,icm42600:
- Fix collision of enum value of 0 with error path where 0 is no
match.
renesas,rzg2l_Adc:
- Add missing fwnode_handle_put() in error path.
rescale:
- Fix a boolean logic bug for detection of raw + scale affecting
an obscure corner case.
semtech,sx9324:
- Check return value of read of pin_defs
st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't
expose the vref_int channel.
- Fix maximum clock rate for stm32pm15x
ti,ads131e08:
- Add missing fwnode_handle_put() in error paths.
xilinx,ams:
- Fix variable checked for error from platform_get_irq()
x-powers,axp288:
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
yamaha,yas530:
- Fix inverted check on calibration data being all zeros.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
iio: accel: mma8452: ignore the return value of reset operation
iio: adc: stm32: fix maximum clock rate for stm32mp15x
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
iio: adc: vf610: fix conversion mode sysfs node name
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
iio:humidity:hts221: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio: afe: rescale: Fix boolean logic bug
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: trigger: sysfs: fix use-after-free on remove
...
Linus Torvalds [Sat, 25 Jun 2022 17:02:05 +0000 (10:02 -0700)]
Merge tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 5.19-rc4
for a few small reported issues. They include:
- new usb-serial driver ids
- MAINTAINERS file update to properly catch the USB dts files
- dt-bindings fixes for reported build warnings
- xhci driver fixes for reported problems
- typec Kconfig dependancy fix
- raw_gadget fuzzing fixes found by syzbot
- chipidea driver bugfix
- usb gadget uvc bugfix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: check request status before setting device address
USB: gadget: Fix double-free bug in raw_gadget driver
xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
xhci: turn off port power in shutdown
xhci: Keep interrupt disabled in initialization until host is running.
USB: serial: option: add Quectel RM500K module support
USB: serial: option: add Quectel EM05-G modem
USB: serial: pl2303: add support for more HXN (G) types
usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
usb: gadget: uvc: fix list double add in uvcg_video_pump
dt-bindings: usb: ehci: Increase the number of PHYs
dt-bindings: usb: ohci: Increase the number of PHYs
usb: gadget: Fix non-unique driver names in raw-gadget driver
MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
USB: serial: option: add Telit LE910Cx 0x1250 composition
Linus Torvalds [Sat, 25 Jun 2022 16:24:59 +0000 (09:24 -0700)]
Merge tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some bug fixes and a trivial cleanup"
* tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make compute_return_era() return void
LoongArch: Fix wrong fpu version
LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
LoongArch: Fix the _stext symbol address
LoongArch: Fix the !THP build
Linus Torvalds [Sat, 25 Jun 2022 16:19:51 +0000 (09:19 -0700)]
Merge tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Some urgent fixes to avoid generating corrupted inodes caused by
compressed and inline_data files.
In addition, avoid a wrong error report which prevents a roll-forward
recovery"
* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: do not count ENOENT for error case
f2fs: fix iostat related lock protection
f2fs: attach inline_data after setting compression
Tiezhu Yang [Sat, 18 Jun 2022 04:50:31 +0000 (12:50 +0800)]
LoongArch: Fix wrong fpu version
According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.
Huacai Chen [Thu, 23 Jun 2022 08:11:54 +0000 (16:11 +0800)]
LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.
Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Thu, 23 Jun 2022 01:55:42 +0000 (09:55 +0800)]
LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
Since setup_tlb_handler() is executed in atomic context, we should use
GFP_ATOMIC instead of GFP_KERNEL to alloc pages. Otherwise we will get
a "sleeping in atomic context" error:
Huacai Chen [Sat, 25 Jun 2022 08:55:41 +0000 (16:55 +0800)]
LoongArch: Fix the _stext symbol address
_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.
Huacai Chen [Wed, 22 Jun 2022 13:56:16 +0000 (21:56 +0800)]
LoongArch: Fix the !THP build
Fix the !THP build by making pmd_pfn() available in all configurations.
Because pmd_pfn() is used in mm/page_vma_mapped.c whether or not THP is
configured.
Linus Torvalds [Fri, 24 Jun 2022 20:54:16 +0000 (13:54 -0700)]
Merge tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A bunch of driver specific fixes, plus a fix for spi-mem's status
polling for devices that use GPIO chip selects and a DT bindings
examples fix that helps with the validation work"
* tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip: Unmask IRQ at the final to avoid preemption
spi: dt-bindings: Fix unevaluatedProperties warnings in examples
spi: spi-mem: Fix spi_mem_poll_status()
spi: cadence: Detect transmit FIFO depth
spi: spi-cadence: Fix SPI CS gets toggling sporadically
Linus Torvalds [Fri, 24 Jun 2022 20:49:13 +0000 (13:49 -0700)]
Merge tag 'regmap-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Two sets of fixes - one for things that were missed with the support
for custom bulk I/O operations introduced in the last merge window,
and another for some long standing issues with regmap-irq which affect
a fairly small subset of devices"
* tag 'regmap-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Fix offset/index mismatch in read_sub_irq_data()
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
regmap: Wire up regmap_config provided bulk write in missed functions
regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't set
regmap: Re-introduce bulk read support check in regmap_bulk_read()
Linus Torvalds [Fri, 24 Jun 2022 20:41:47 +0000 (13:41 -0700)]
Merge tag 'iommu-fixes-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Add a new IOMMU mailing list to the MAINTAINERS file to prepare for
the a list migration happening on July 5th. The old list needs to
stay in place until the switch happens to guarantee seemless
archiving of list email.
- Fix compatible device-tree string for rcar-gen4 in Renesas IOMMU
driver.
* tag 'iommu-fixes-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Add new IOMMU development mailing list
iommu/ipmmu-vmsa: Fix compatible for rcar-gen4
projects / mirror_ubuntu-kernels.git / log