bridge: Add extack warning when enabling STP in netns.
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast 95655376812861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing 1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe") Suggested-by: Harry Coin <hcoin@quietfountain.com> Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/ Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Brown [Wed, 12 Jul 2023 11:16:16 +0000 (12:16 +0100)]
net: dsa: ar9331: Use explict flags for regmap single read/write
The at9331 is only able to read or write a single register at once. The
driver has a custom regmap bus and chooses to tell the regmap core about
this by reporting the maximum transfer sizes rather than the explicit
flags that exist at the regmap level. Since there are a number of
problems with the raw transfer limits and the regmap level flags are
better integrated anyway convert the driver to use the flags.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.
The fix is simply to add such a check.
Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa: mv88e6xxx: Do a final check before timing out
I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.
Some added prints show things like this:
[ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
ATU op 4000, fid 0001
(...)
[ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
for PHY command 1860 to complete
The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.
As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.
Current release - regressions:
- netfilter: conntrack: gre: don't set assured flag for clash entries
- wifi: iwlwifi: remove 'use_tfh' config to fix crash
Previous releases - regressions:
- ipv6: fix a potential refcount underflow for idev
- icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
icmp6_dev()
- bpf: fix max stack depth check for async callbacks
- eth: mlx5e:
- check for NOT_READY flag state after locking
- fix page_pool page fragment tracking for XDP
- eth: igc:
- fix tx hang issue when QBV gate is closed
- fix corner cases for TSN offload
- eth: octeontx2-af: Move validation of ptp pointer before its usage
- eth: ena: fix shift-out-of-bounds in exponential backoff
Previous releases - always broken:
- core: prevent skb corruption on frag list segmentation
- sched:
- cls_fw: fix improper refcount update leads to use-after-free
- sch_qfq: account for stab overhead in qfq_enqueue
- netfilter:
- report use refcount overflow
- prevent OOB access in nft_byteorder_eval
- wifi: mt7921e: fix init command fail with enabled device
- eth: ocelot: fix oversize frame dropping for preemptible TCs
- eth: fec: recycle pages for transmitted XDP frames"
* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
selftests: tc-testing: add test for qfq with stab overhead
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
selftests: tc-testing: add tests for qfq mtu sanity check
net/sched: sch_qfq: reintroduce lmax bound check for MTU
wifi: cfg80211: fix receiving mesh packets without RFC1042 header
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
net: txgbe: fix eeprom calculation error
net/sched: make psched_mtu() RTNL-less safe
net: ena: fix shift-out-of-bounds in exponential backoff
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: flower: Ensure both minimum and maximum ports are specified
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
docs: netdev: update the URL of the status page
wifi: iwlwifi: remove 'use_tfh' config to fix crash
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
wifi: airo: avoid uninitialized warning in airo_get_rate()
octeontx2-pf: Add additional check for MCAM rules
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
net: fec: use netdev_err_once() instead of netdev_err()
...
Merge tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix some missing-prototype warnings
- Fix user events struct args (did not include size of struct)
When creating a user event, the "struct" keyword is to denote that
the size of the field will be passed in. But the parsing failed to
handle this case.
- Add selftest to struct sizes for user events
- Fix sample code for direct trampolines.
The sample code for direct trampolines attached to handle_mm_fault().
But the prototype changed and the direct trampoline sample code was
not updated. Direct trampolines needs to have the arguments correct
otherwise it can fail or crash the system.
Due to backward compatibility, the structure used to save stack
traces in the kernel had a fixed size of 8. This structure is
exported to user space via the tracing format file. A change was made
to allow more than 8 functions to be recorded, and user space now
uses the size field to know how many functions are actually in the
stack.
But the structure still has size of 8 (even though it points into the
ring buffer that has the required amount allocated to hold a full
stack.
This was fine until the fortifier noticed that the
memcpy(&entry->caller, stack, size) was greater than the 8 functions
and would complain at runtime about it.
Hide this by using a pointer to the stack location on the ring buffer
instead of using the address of the entry structure caller field.
- Fix a deadloop in reading trace_pipe that was caused by a mismatch
between ring_buffer_empty() returning false which then asked to read
the data, but the read code uses rb_num_of_entries() that returned
zero, and causing a infinite "retry".
- Fix a warning caused by not using all pages allocated to store ftrace
functions, where this can happen if the linker inserts a bunch of
"NULL" entries, causing the accounting of how many pages needed to be
off.
- Fix histogram synthetic event crashing when the start event is
removed and the end event is still using a variable from it
- Fix memory leak in freeing iter->temp in tracing_release_pipe()
* tag 'trace-v6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak of iter->temp when reading trace_pipe
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
ring-buffer: Fix deadloop issue on reading trace_pipe
tracing: arm64: Avoid missing-prototype warnings
selftests/user_events: Test struct size match cases
tracing/user_events: Fix struct arg size match check
x86/ftrace: Remove unsued extern declaration ftrace_regs_caller_ret()
arm64: ftrace: Add direct call trampoline samples support
samples: ftrace: Save required argument registers in sample trampolines
Merge tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of the Xen related ELF-notes
- a fix for virtio handling in Xen dom0 when running Xen in a VM
* tag 'for-linus-6.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/virtio: Fix NULL deref when a bridge of PCI root bus has no parent
x86/Xen: tidy xen-head.S
Merge tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh fixes from John Paul Adrian Glaubitz:
"The sh updates introduced multiple regressions.
In particular, the change a8ac2961148e ("sh: Avoid using IRQ0 on SH3
and SH4") causes several boards to hang during boot due to incorrect
IRQ numbers.
Geert Uytterhoeven has contributed patches that handle the virq offset
in the IRQ code for the dreamcast, highlander and r2d boards while
Artur Rojek has contributed a patch which handles the virq offset for
the hd64461 companion chip"
* tag 'sh-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
sh: mach-dreamcast: Handle virq offset in cascaded IRQ demux
sh: mach-highlander: Handle virq offset in cascaded IRL demux
sh: mach-r2d: Handle virq offset in cascaded IRL demux
Pedro Tammela [Tue, 11 Jul 2023 21:01:02 +0000 (18:01 -0300)]
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: Lion <nnamrec@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pedro Tammela [Tue, 11 Jul 2023 21:01:00 +0000 (18:01 -0300)]
net/sched: sch_qfq: reintroduce lmax bound check for MTU
25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Artur Rojek [Mon, 10 Jul 2023 23:31:32 +0000 (01:31 +0200)]
sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ
A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.
Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.
Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4") Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
sh: mach-r2d: Handle virq offset in cascaded IRL demux
When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.
Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.
Fixes: a8ac2961148e8c72 ("sh: Avoid using IRQ0 on SH3 and SH4") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c
should return negative error code instead of a positive value count.
Fix this bug by returning correct error code.
For some device types like TXGBE_ID_XAUI, *checksum computed in
txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the
limit on the size of *checksum.
Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware") Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC fix from Stafford Horne:
- During the 6.4 cycle my fpu support work broke ABI compatibility in
the sigcontext struct. This was noticed by musl libc developers after
the release. This fix restores the ABI.
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI
tracing/histograms: Add histograms to hist_vars if they have referenced variables
Hist triggers can have referenced variables without having direct
variables fields. This can be the case if referenced variables are added
for trigger actions. In this case the newly added references will not
have field variables. Not taking such referenced variables into
consideration can result in a bug where it would be possible to remove
hist trigger with variables being refenced. This will result in a bug
that is easily reproducable like so
We hit the bug because when second hist trigger has was created
has_hist_vars() returned false because hist trigger did not have
variables. As a result of that save_hist_vars() was not called to add
the trigger to trace_array->hist_vars. Later on when we attempted to
remove the first histogram find_any_var_ref() failed to detect it is
being used because it did not find the second trigger in hist_vars list.
With this change we wait until trigger actions are created so we can take
into consideration if hist trigger has variable references. Also, now we
check the return value of save_hist_vars() and fail trigger creation if
save_hist_vars() fails.
Pedro Tammela [Tue, 11 Jul 2023 02:16:34 +0000 (23:16 -0300)]
net/sched: make psched_mtu() RTNL-less safe
Eric Dumazet says[1]:
-------
Speaking of psched_mtu(), I see that net/sched/sch_pie.c is using it
without holding RTNL, so dev->mtu can be changed underneath.
KCSAN could issue a warning.
-------
Annotate dev->mtu with READ_ONCE() so KCSAN don't issue a warning.
Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230711021634.561598-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: ena: fix shift-out-of-bounds in exponential backoff
The ENA adapters on our instances occasionally reset. Once recently
logged a UBSAN failure to console in the process:
UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117
Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017
Workqueue: ena ena_fw_reset_device [ena]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
? __const_udelay+0x43/0x50
ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena]
wait_for_reset_state+0x54/0xa0 [ena]
ena_com_dev_reset+0xc8/0x110 [ena]
ena_down+0x3fe/0x480 [ena]
ena_destroy_device+0xeb/0xf0 [ena]
ena_fw_reset_device+0x30/0x50 [ena]
process_one_work+0x22b/0x3d0
worker_thread+0x4d/0x3f0
? process_one_work+0x3d0/0x3d0
kthread+0x12a/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Apparently, the reset delays are getting so large they can trigger a
UBSAN panic.
Looking at the code, the current timeout is capped at 5000us. Using a
base value of 100us, the current code will overflow after (1<<29). Even
at values before 32, this function wraps around, perhaps
unintentionally.
Cap the value of the exponent used for this backoff at (1<<16) which is
larger than currently necessary, but large enough to support bigger
values in the future.
tracing: Stop FORTIFY_SOURCE complaining about stack trace caller
The stack_trace event is an event created by the tracing subsystem to
store stack traces. It originally just contained a hard coded array of 8
words to hold the stack, and a "size" to know how many entries are there.
This is exported to user space as:
Where the user space tracers could parse the stack. The library was
updated for this specific event to only look at the size, and not the
array. But some older users still look at the array (note, the older code
still checks to make sure the array fits inside the event that it read.
That is, if only 4 words were saved, the parser would not read the fifth
word because it will see that it was outside of the event size).
This event was changed a while ago to be more dynamic, and would save a
full stack even if it was greater than 8 words. It does this by simply
allocating more ring buffer to hold the extra words. Then it copies in the
stack via:
memcpy(&entry->caller, fstack->calls, size);
As the entry is struct stack_entry, that is created by a macro to both
create the structure and export this to user space, it still had the caller
field of entry defined as: unsigned long caller[8].
When the stack is greater than 8, the FORTIFY_SOURCE code notices that the
amount being copied is greater than the source array and complains about
it. It has no idea that the source is pointing to the ring buffer with the
required allocation.
To hide this from the FORTIFY_SOURCE logic, pointer arithmetic is used:
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
As comments in ftrace_process_locs(), there may be NULL pointers in
mcount_loc section:
> Some architecture linkers will pad between
> the different mcount_loc sections of different
> object files to satisfy alignments.
> Skip any NULL pointers.
After commit 20e5227e9f55 ("ftrace: allow NULL pointers in mcount_loc"),
NULL pointers will be accounted when allocating ftrace pages but skipped
before adding into ftrace pages, this may result in some pages not being
used. Then after commit 706c81f87f84 ("ftrace: Remove extra helper
functions"), warning may occur at:
WARN_ON(pg->next);
To fix it, only warn for case that no pointers skipped but pages not used
up, then free those unused pages after releasing ftrace_lock.
Dan Carpenter [Tue, 11 Jul 2023 08:52:26 +0000 (11:52 +0300)]
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
The simple_write_to_buffer() function is designed to handle partial
writes. It returns negatives on error, otherwise it returns the number
of bytes that were able to be copied. This code doesn't check the
return properly. We only know that the first byte is written, the rest
of the buffer might be uninitialized.
There is no need to use the simple_write_to_buffer() function.
Partial writes are prohibited by the "if (*ppos != 0)" check at the
start of the function. Just use memdup_user() and copy the whole
buffer.
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Misc small fixes and hw-id additions"
* tag 'platform-drivers-x86-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
platform/x86: dell-ddv: Fix mangled list in documentation
platform/x86: dell-ddv: Improve error handling
platform/x86/amd: pmf: Add new ACPI ID AMDI0103
platform/x86/amd: pmc: Add new ACPI ID AMDI000A
platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
platform/x86/intel/tpmi: Prevent overflow for cap_offset
platform/x86: wmi: Replace open coded guid_parse_and_compare()
platform/x86: wmi: Break possible infinite loop when parsing GUID
Merge tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Fix fprobe's rethook release issues:
- Release rethook after ftrace_ops is unregistered so that the
rethook is not accessed after free.
- Stop rethook before ftrace_ops is unregistered so that the
rethook is NOT used after exiting unregister_fprobe()
- Fix eprobe cleanup logic. If it attaches to multiple events and
failes to enable one of them, rollback all enabled events correctly.
- Fix fprobe to unlock ftrace recursion lock correctly when it missed
by another running kprobe.
- Cleanup kprobe to remove unnecessary NULL.
- Cleanup kprobe to remove unnecessary 0 initializations.
* tag 'probes-fixes-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
kernel: kprobes: Remove unnecessary ‘0’ values
kprobes: Remove unnecessary ‘NULL’ values from correct_ret_addr
fprobe: add unlock to match a succeeded ftrace_test_recursion_trylock
kernel/trace: Fix cleanup logic of enable_trace_eprobe
fprobe: Release rethook after the ftrace_ops is unregistered
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu().
Arnd Bergmann [Wed, 17 May 2023 12:51:48 +0000 (14:51 +0200)]
tracing: arm64: Avoid missing-prototype warnings
These are all tracing W=1 warnings in arm64 allmodconfig about missing
prototypes:
kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro
totypes]
kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes]
arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]
Move the declarations to an appropriate header where they can be seen
by the caller and callee, and make sure the headers are included where
needed.
Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Florent Revest <revest@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
net/sched: flower: Ensure both minimum and maximum ports are specified
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Jul 2023 09:07:24 +0000 (10:07 +0100)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix corner cases for TSN offload
Florian Kauer says:
The igc driver supports several different offloading capabilities
relevant in the TSN context. Recent patches in this area introduced
regressions for certain corner cases that are fixed in this series.
Each of the patches (except the first one) addresses a different
regression that can be separately reproduced. Still, they have
overlapping code changes so they should not be separately applied.
Especially #4 and #6 address the same observation,
but both need to be applied to avoid TX hang occurrences in
the scenario described in the patches.
====================
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Halaney [Mon, 10 Jul 2023 19:50:57 +0000 (14:50 -0500)]
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
linux-arm-msm is the list most people subscribe to in order to receive
updates about Qualcomm related drivers. Make sure changes for the
Qualcomm ethernet driver make it there.
Johannes Berg [Mon, 10 Jul 2023 14:50:39 +0000 (16:50 +0200)]
wifi: iwlwifi: remove 'use_tfh' config to fix crash
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.
There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.
Currently, verifier does not reject XDP programs that pass NULL pointer to
hints functions. At the same time, this case is not handled in any driver
implementation (including veth). For example, changing
bpf_xdp_metadata_rx_timestamp(ctx, ×tamp);
to
bpf_xdp_metadata_rx_timestamp(ctx, NULL);
in xdp_metadata test successfully crashes the system.
Add KF_TRUSTED_ARGS flag to hints kfunc definitions, so driver code
does not have to worry about getting invalid pointers.
In the cpu_map_update_elem flow, when kthread_stop is called before
calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit
of kthread has been set by kthread_stop, the threadfn of rcpu->kthread
will never be executed, and rcpu->refcnt will never be 0, which will
lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be
released.
Calling kthread_stop before executing kthread's threadfn will return
-EINTR. We can complete the release of memory resources in this state.
Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Pu Lehui <pulehui@huawei.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Randy Dunlap [Sun, 9 Jul 2023 13:31:54 +0000 (06:31 -0700)]
wifi: airo: avoid uninitialized warning in airo_get_rate()
Quieten a gcc (11.3.0) build error or warning by checking the function
call status and returning -EBUSY if the function call failed.
This is similar to what several other wireless drivers do for the
SIOCGIWRATE ioctl call when there is a locking problem.
drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized]
Thomas GENTY [Fri, 7 Jul 2023 14:14:25 +0000 (16:14 +0200)]
platform/x86: touchscreen_dmi: Add info for the Archos 101 Cesium Educ tablet
Add info for the Archos 101 Cesium Educ tablet
It was tested using gslx680_ts_acpi module
PR at https://github.com/onitake/gsl-firmware/pull/210 for the firmware
Armin Wolf [Fri, 7 Jul 2023 01:03:32 +0000 (03:03 +0200)]
platform/x86: dell-ddv: Improve error handling
If for some reason a external function returns -ENODEV,
no error message is being displayed because the driver
assumes that -ENODEV can only be returned internally if
no sensors, etc where found.
Fix this by explicitly returning 0 in such a case since
missing hardware is no error. Also remove the now obsolete
check for -ENODEV.
platform/x86/amd: pmc: Apply nvme quirk to HP 15s-eq2xxx
HP 15s-eq2xxx is an older Lucienne laptop that has a problem resuming
from s2idle when IOMMU is enabled. The symptoms very closely resemble
that of the Lenovo issues with NVME resume. Lucienne was released in
a similar timeframe as the Renoir / Cezanne Lenovo laptops and they
may have similar BIOS code.
Applying the same quirk to this system allows the system to work with
IOMMU enabled and s2idle resume to work.
platform/x86: Move s2idle quirk from thinkpad-acpi to amd-pmc
It turns out that some-non Lenovo systems can benefit from the quirk
introduced for Lenovo systems in commit 455cd867b85b5 ("platform/x86:
thinkpad_acpi: Add a s2idle resume quirk for a number of laptops").
So move this quirk into running from the amd-pmc driver instead.
No intended functional changes.
Lu Hongfei [Mon, 10 Jul 2023 03:18:59 +0000 (11:18 +0800)]
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
Remove unnecessary of_node_put from the continue path to prevent
child node from being released twice, which could avoid resource
leak or other unexpected issues.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported") Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net: fec: fix some issues of ndo_xdp_xmit()
We encountered some issues when testing the ndo_xdp_xmit() interface
of the fec driver on i.MX8MP and i.MX93 platforms. These issues are
easy to reproduce, and the specific reproduction steps are as follows.
step1: The ethernet port of a board (board A) is connected to the EQOS
port of i.MX8MP/i.MX93, and the FEC port of i.MX8MP/i.MX93 is connected
to another ethernet port, such as a switch port.
step2: Board A uses the pktgen_sample03_burst_single_flow.sh to generate
and send packets to i.MX8MP/i.MX93. The command is shown below.
./pktgen_sample03_burst_single_flow.sh -i eth0 -d 192.168.6.8 -m \
56:bf:0d:68:b0:9e -s 1500
step3: i.MX8MP/i.MX93 use the xdp_redirect bfp program to redirect the
XDP frames from EQOS port to FEC port. The command is shown below.
./xdp_redirect eth1 eth0
After a few moments, the warning or error logs will be printed in the
console, for more details, please refer to the commit message of each
patch.
====================
net: fec: use netdev_err_once() instead of netdev_err()
In the case of heavy XDP traffic to be transmitted, the console
will print the error log continuously if there are lack of enough
BDs to accommodate the frames. The log looks like below.
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
Not only will this log be replicated and redundant, it will also
degrade XDP performance. So we use netdev_err_once() instead of
netdev_err() now.
net: fec: increase the size of tx ring and update tx_wake_threshold
When the XDP feature is enabled and with heavy XDP frames to be
transmitted, there is a considerable probability that available
tx BDs are insufficient. This will lead to some XDP frames to be
discarded and the "NOT enough BD for SG!" error log will appear
in the console (as shown below).
[ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG!
[ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG!
In the case of heavy XDP traffic, sometimes the speed of recycling
tx BDs may be slower than the speed of sending XDP frames. There
may be several specific reasons, such as the interrupt is not
responsed in time, the efficiency of the NAPI callback function is
too low due to all the queues (tx queues and rx queues) share the
same NAPI, and so on.
After trying various methods, I think that increase the size of tx
BD ring is simple and effective. Maybe the best resolution is that
allocate NAPI for each queue to improve the efficiency of the NAPI
callback, but this change is a bit big and I didn't try this method.
Perheps this method will be implemented in a future patch.
This patch also updates the tx_wake_threshold of tx ring which is
related to the size of tx ring in the previous logic. Otherwise,
the tx_wake_threshold will be too high (403 BDs), which is more
likely to impact the slow path in the case of heavy XDP traffic,
because XDP path and slow path share the tx BD rings. According
to Jakub's suggestion, the tx_wake_threshold is at least equal to
tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of
entries is overflowing, we should be able to apply a hysteresis
of a few tens of entries.
net: fec: recycle pages for transmitted XDP frames
Once the XDP frames have been successfully transmitted through the
ndo_xdp_xmit() interface, it's the driver responsibility to free
the frames so that the page_pool can recycle the pages and reuse
them. However, this action is not implemented in the fec driver.
This leads to a user-visible problem that the console will print
the following warning log.
[ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec
[ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec
[ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec
[ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec
[ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec
Therefore, to solve this issue, we free XDP frames via xdp_return_frame()
while cleaning the tx BD ring.
net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDP
When a XDP program is installed or uninstalled, fec_restart() will
be invoked to reset MAC and buffer descriptor rings. It's reasonable
not to transmit any packet during the process of reset. However, the
NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default,
that is to say, it's possible that the fec_enet_xdp_xmit() will be
invoked even if the process of reset is not finished. In this case,
the redirected XDP frames might be dropped and available transmit BDs
may be incorrectly deemed insufficient. So this patch disable the
NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure
this feature when the bpf program is installed or uninstalled.
Fixes: e4ac7cc6e5a4 ("net: fec: turn on XDP features") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Björn Töpel [Mon, 10 Jul 2023 07:41:31 +0000 (09:41 +0200)]
riscv, bpf: Fix inconsistent JIT image generation
In order to generate the prologue and epilogue, the BPF JIT needs to
know which registers that are clobbered. Therefore, the during
pre-final passes, the prologue is generated after the body of the
program body-prologue-epilogue. Then, in the final pass, a proper
prologue-body-epilogue JITted image is generated.
This scheme has worked most of the time. However, for some large
programs with many jumps, e.g. the test_kmod.sh BPF selftest with
hardening enabled (blinding constants), this has shown to be
incorrect. For the final pass, when the proper prologue-body-epilogue
is generated, the image has not converged. This will lead to that the
final image will have incorrect jump offsets. The following is an
excerpt from an incorrect image:
The image has shrunk, and the epilogue offset is incorrect in the
final pass.
Correct the problem by always generating proper prologue-body-epilogue
outputs, which means that the first pass will only generate the body
to track what registers that are touched.
Beau Belgrave [Thu, 29 Jun 2023 23:50:48 +0000 (23:50 +0000)]
tracing/user_events: Fix struct arg size match check
When users register an event the name of the event and it's argument are
checked to ensure they match if the event already exists. Normally all
arguments are in the form of "type name", except for when the type
starts with "struct ". In those cases, the size of the struct is passed
in addition to the name, IE: "struct my_struct a 20" for an argument
that is of type "struct my_struct" with a field name of "a" and has the
size of 20 bytes.
The current code does not honor the above case properly when comparing
a match. This causes the event register to fail even when the same
string was used for events that contain a struct argument within them.
The example above "struct my_struct a 20" generates a match string of
"struct my_struct a" omitting the size field.
Add the struct size of the existing field when generating a comparison
string for a struct field to ensure proper match checking.
Link: https://lkml.kernel.org/r/20230629235049.581-2-beaub@linux.microsoft.com Cc: stable@vger.kernel.org Fixes: e6f89a149872 ("tracing/user_events: Ensure user provided strings are safely formatted") Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
fprobe: Ensure running fprobe_exit_handler() finished before calling rethook_free()
Ensure running fprobe_exit_handler() has finished before
calling rethook_free() in the unregister_fprobe() so that caller can free
the fprobe right after unregister_fprobe().
unregister_fprobe() ensured that all running fprobe_entry/exit_handler()
have finished by calling unregister_ftrace_function() which synchronizes
RCU. But commit 5f81018753df ("fprobe: Release rethook after the ftrace_ops
is unregistered") changed to call rethook_free() after
unregister_ftrace_function(). So call rethook_stop() to make rethook
disabled before unregister_ftrace_function() and ensure it again.
Here is the possible code flow that can call the exit handler after
unregister_fprobe().
------
CPU1 CPU2
call unregister_fprobe(fp)
...
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == fprobe_exit_handler
call fprobe_exit_handler()
rethook_free():
set rh->handler = NULL;
return from unreigster_fprobe;
call fp->exit_handler() <- (*)
------
(*) At this point, the exit handler is called after returning from
unregister_fprobe().
This fixes it as following;
------
CPU1 CPU2
call unregister_fprobe()
...
rethook_stop():
set rh->handler = NULL;
__fprobe_handler()
rethook_hook() on probed function
unregister_ftrace_function()
return from probed function
rethook hooks
find rh->handler == NULL
return from rethook
rethook_free()
return from unreigster_fprobe;
------
arm64: ftrace: Add direct call trampoline samples support
The ftrace samples need per-architecture trampoline implementations
to save and restore argument registers around the calls to
my_direct_func* and to restore polluted registers (eg: x30).
These samples also include <asm/asm-offsets.h> which, on arm64, is not
necessary and redefines previously defined macros (resulting in
warnings) so these includes are guarded by !CONFIG_ARM64.
Link: https://lkml.kernel.org/r/20230427140700.625241-3-revest@chromium.org Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
samples: ftrace: Save required argument registers in sample trampolines
The ftrace-direct-too sample traces the handle_mm_fault function whose
signature changed since the introduction of the sample. Since:
commit bce617edecad ("mm: do page fault accounting in handle_mm_fault")
handle_mm_fault now has 4 arguments. Therefore, the sample trampoline
should save 4 argument registers.
s390 saves all argument registers already so it does not need a change
but x86_64 needs an extra push and pop.
This also evolves the signature of the tracing function to make it
mirror the signature of the traced function.
Link: https://lkml.kernel.org/r/20230427140700.625241-2-revest@chromium.org Cc: stable@vger.kernel.org Fixes: bce617edecad ("mm: do page fault accounting in handle_mm_fault") Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stafford Horne [Wed, 28 Jun 2023 16:54:40 +0000 (17:54 +0100)]
openrisc: Union fpcsr and oldmask in sigcontext to unbreak userspace ABI
With commit 27267655c531 ("openrisc: Support floating point user api") I
added an entry to the struct sigcontext which caused an unwanted change
to the userspace ABI.
To fix this we use the previously unused oldmask field space for the
floating point fpcsr state. We do this with a union to restore the ABI
back to the pre kernel v6.4 ABI and keep API compatibility.
This does mean if there is some code somewhere that is setting oldmask
in an OpenRISC specific userspace sighandler it would end up setting the
floating point register status, but I think it's unlikely as oldmask was
never functional before.
Fixes: 27267655c531 ("openrisc: Support floating point user api") Reported-by: Szabolcs Nagy <nsz@port70.net> Closes: https://lore.kernel.org/openrisc/20230626213840.GA1236108@port70.net/ Signed-off-by: Stafford Horne <shorne@gmail.com>
Merge tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a couple of regressions in af_alg and incorrect return values in
crypto/asymmetric_keys/public_key"
* tag 'v6.5-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - Fix race between MORE and non-MORE sends
KEYS: asymmetric: Fix error codes
crypto: af_alg - Fix merging of written data into spliced pages
Florian Kauer [Wed, 14 Jun 2023 14:07:14 +0000 (16:07 +0200)]
igc: Fix inserting of empty frame for launchtime
The insertion of an empty frame was introduced with
commit db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
in order to ensure that the current cycle has at least one packet if
there is some packet to be scheduled for the next cycle.
However, the current implementation does not properly check if
a packet is already scheduled for the current cycle. Currently,
an empty packet is always inserted if and only if
txtime >= end_of_cycle && txtime > last_tx_cycle
but since last_tx_cycle is always either the end of the current
cycle (end_of_cycle) or the end of a previous cycle, the
second part (txtime > last_tx_cycle) is always true unless
txtime == last_tx_cycle.
What actually needs to be checked here is if the last_tx_cycle
was already written within the current cycle, so an empty frame
should only be inserted if and only if
txtime >= end_of_cycle && end_of_cycle > last_tx_cycle.
This patch does not only avoid an unnecessary insertion, but it
can actually be harmful to insert an empty packet if packets
are already scheduled in the current cycle, because it can lead
to a situation where the empty packet is actually processed
as the first packet in the upcoming cycle shifting the packet
with the first_flag even one cycle into the future, finally leading
to a TX hang.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Florian Kauer [Wed, 14 Jun 2023 14:07:13 +0000 (16:07 +0200)]
igc: Fix launchtime before start of cycle
It is possible (verified on a running system) that frames are processed
by igc_tx_launchtime with a txtime before the start of the cycle
(baset_est).
However, the result of txtime - baset_est is written into a u32,
leading to a wrap around to a positive number. The following
launchtime > 0 check will only branch to executing launchtime = 0
if launchtime is already 0.
Fix it by using a s32 before checking launchtime > 0.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Florian Kauer [Wed, 14 Jun 2023 14:07:12 +0000 (16:07 +0200)]
igc: No strict mode in pure launchtime/CBS offload
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END
prevent the packet transmission over slot and cycle boundaries.
This is important for taprio offload where the slots and
cycles correspond to the slots and cycles configured for the
network.
However, the Qbv offload feature of the i225 is also used for
enabling TX launchtime / ETF offload. In that case, however,
the cycle has no meaning for the network and is only used
internally to adapt the base time register after a second has
passed.
Enabling strict mode in this case would unnecessarily prevent
the transmission of certain packets (i.e. at the boundary of a
second) and thus interferes with the ETF qdisc that promises
transmission at a certain point in time.
Similar to ETF, this also applies to CBS offload that also should
not be influenced by strict mode unless taprio offload would be
enabled at the same time.
This fully reverts
commit d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling")
but its commit message only describes what was already implemented
before that commit. The difference to a plain revert of that commit
is that it now copes with the base_time = 0 case that was fixed with
commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
In particular, enabling strict mode leads to TX hang situations
under high traffic if taprio is applied WITHOUT taprio offload
but WITH ETF offload, e.g. as in
Fixes: d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
kernel/trace: Fix cleanup logic of enable_trace_eprobe
The enable_trace_eprobe() function enables all event probes, attached
to given trace probe. If an error occurs in enabling one of the event
probes, all others should be roll backed. There is a bug in that roll
back logic - instead of all event probes, only the failed one is
disabled.
Link: https://lore.kernel.org/all/20230703042853.1427493-1-tz.stoyanov@gmail.com/ Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Florian Kauer [Wed, 14 Jun 2023 14:07:11 +0000 (16:07 +0200)]
igc: Handle already enabled taprio offload for basetime 0
Since commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
it is possible to enable taprio offload with a basetime of 0.
However, the check if taprio offload is already enabled (and thus -EALREADY
should be returned for igc_save_qbv_schedule) still relied on
adapter->base_time > 0.
Florian Kauer [Wed, 14 Jun 2023 14:07:10 +0000 (16:07 +0200)]
igc: Do not enable taprio offload for invalid arguments
Only set adapter->taprio_offload_enable after validating the arguments.
Otherwise, it stays set even if the offload was not enabled.
Since the subsequent code does not get executed in case of invalid
arguments, it will not be read at first.
However, by activating and then deactivating another offload
(e.g. ETF/TX launchtime offload), taprio_offload_enable is read
and erroneously keeps the offload feature of the NIC enabled.
Florian Kauer [Wed, 14 Jun 2023 14:07:09 +0000 (16:07 +0200)]
igc: Rename qbv_enable to taprio_offload_enable
In the current implementation the flags adapter->qbv_enable
and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not
have the same meaning. The first one is used only to indicate
taprio offload (i.e. when igc_save_qbv_schedule was called),
while the second one corresponds to the Qbv mode of the hardware.
However, the second one is also used to support the TX launchtime
feature, i.e. ETF qdisc offload. This leads to situations where
adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED
is set. This is prone to confusion.
The rename should reduce this confusion. Since it is a pure
rename, it has no impact on functionality.
Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tom Rix [Sun, 2 Jul 2023 13:44:19 +0000 (09:44 -0400)]
platform/x86: int3472/discrete: set variable skl_int3472_regulator_second_sensor storage-class-specifier to static
smatch reports
drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol
'skl_int3472_regulator_second_sensor' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
platform/x86/intel/tpmi: Prevent overflow for cap_offset
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT
(which is equal to 1024) to covert to bytes will cause overflow. This
will be a problem once more TPMI features are added.
This field is not used except for calculating pfs->vsec_offset. So, leave
cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while
calculating pfs->vsec_offset.
Andy Shevchenko [Wed, 21 Jun 2023 15:11:54 +0000 (18:11 +0300)]
platform/x86: wmi: Break possible infinite loop when parsing GUID
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id") Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com Tested-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Current codebase contained the usage of two different names for this
driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users
to use, especially when trying to bind or unbind the driver manually.
The corresponding kernel module is registered with the name of `gve`.
It's more reasonable to align the name of the driver with the module.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Cc: csully@google.com Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for the return value of skb_copy in order to avoid NULL pointer
dereference.
Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Merge tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Dmitry Torokhov [Tue, 27 Jun 2023 22:09:01 +0000 (15:09 -0700)]
HID: input: fix mapping for camera access keys
Commit 9f4211bf7f81 ("HID: add mapping for camera access keys") added
mapping for the camera access keys, but unfortunately used wrong usage
codes for them. HUTRR72[1] specifies that camera access controls use 0x76,
0x077 and 0x78 usages in the consumer control page. Previously mapped 0xd5,
0xd6 and 0xd7 usages are actually defined in HUTRR64[2] as game recording
controls.
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
Match alignment information in composite type declarations used by packed
HOSTCMD report structures. Compiler packing attribute is not recursive for
inner declarations. Mismatched alignment information can cause undefined
behavior in code generated for accessing composite type members. struct
pointers passed to thunderstrike_parse_board_info_payload and
thunderstrike_parse_haptics_payload are an example of this being
potentially problematic since alignment information from the packed HOSTCMD
report is lost.
A previous patch addressed the fortified memcpy warning for most
builds, but I still see this one with gcc-9:
In file included from include/linux/string.h:254,
from drivers/hid/hid-hyperv.c:8:
In function 'fortify_memcpy_chk',
inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My guess is that the WARN_ON() itself is what confuses gcc, so it no
longer sees that there is a correct range check. Rework the code in a
way that helps readability and avoids the warning.
Fixes: 542f25a94471 ("HID: hyperv: Replace one-element array with flexible-array member") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230705140242.844167-1-arnd@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
projects / mirror_ubuntu-kernels.git / log