Chris Wilson [Wed, 10 Jul 2019 06:44:41 +0000 (07:44 +0100)]
drm/i915/execlists: Record preemption for selftests
Put back the preemption counters lost in commit 22b7a426bbe1
("drm/i915/execlists: Preempt-to-busy") so that our selftests that
assert no preemption took place continue to function.
v2: But a timeslice is only a "soft" preemption!
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710064454.682-1-chris@chris-wilson.co.uk
drm/i915: add infrastructure to hold off preemption on a request
We want to set this flag in the next commit on requests containing
perf queries so that the result of the perf query can just be a delta
of global counters, rather than doing post processing of the OA
buffer.
drm/i915/perf: ensure we keep a reference on the driver
The i915 perf stream has its own file descriptor and is tied to
reference of the driver. We haven't taken care of keep the driver
alive.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: eec688e1420da5 ("drm/i915: Add i915 perf infrastructure") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190709123351.5645-2-lionel.g.landwerlin@intel.com
Chris Wilson [Tue, 9 Jul 2019 08:17:18 +0000 (09:17 +0100)]
drm/i915/userptr: Don't mark readonly objects as dirty
If we map an object as readonly into the GTT, we know that the GPU
cannot have written to it and so the object is not dirty and we don't
need to flush the writes back to the system.
Imre Deak [Mon, 8 Jul 2019 14:07:35 +0000 (17:07 +0300)]
drm/i915/icl: Clear the shared port PLLs from the new crtc state
For consistency clear the icl_port_dplls from the new crtc state, when
releasing the DPLLs from the old crtc state. Leaving them set could
result in releasing the same PLLs multiple times from the same CRTC
state incorrectly (if the same CRTC was first used for a TypeC port then
for a combo PHY port).
Leaving the stale pointers behind happens not to cause a problem atm
(since the incorrect releasing will be a NOP), but we need to fix that
for consistency.
Ville Syrjälä [Wed, 19 Jun 2019 18:03:08 +0000 (21:03 +0300)]
drm/i915/sdvo: Use named initializers for the SDVO command names
Use named initializers to make it easier to associate the SDVO debug
prints with the SDVO command defines. Also switch to using ARRAY_SIZE()
instead of assuming that SDVO_CMD_STATUS_SCALING_NOT_SUPP is the last
command type.
Chris Wilson [Mon, 8 Jul 2019 14:03:27 +0000 (15:03 +0100)]
drm/i915/userptr: Acquire the page lock around set_page_dirty()
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708140327.26825-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Jul 2019 15:23:21 +0000 (16:23 +0100)]
drm/i915/selftests: Reorder error cleanup for whitelist checking
Reorder the error paths so that we unwind all the locals from any error
path and so avoid setting off divers alarum in case we find an error in
case we find an error.
Chris Wilson [Sun, 7 Jul 2019 15:11:35 +0000 (16:11 +0100)]
drm/i915: Pull assert_forcewake_active() underneath the lock
Make no assumption that something in the background is not acquiring the
fw_domain -- but we still do not track owner so assume that any active
domain is intended by the caller.
Mika Kuoppala [Fri, 5 Jul 2019 21:52:03 +0000 (22:52 +0100)]
drm/i915/gtt: Setup phys pages for 3lvl pdps
If we setup backing phys page for 3lvl pdps, as they
are not used, we will lose 5 pages per ppgtt.
Trading this memory on bsw, we gain more common code paths for all
gen8+ directory manipulation. And those paths are now void of checks
for page directory type, making the hot paths faster.
Mika Kuoppala [Fri, 5 Jul 2019 21:52:02 +0000 (22:52 +0100)]
drm/i915/gtt: Tear down setup and cleanup macros for page dma
We don't use common codepaths to setup and cleanup page
directories vs page tables. So their setup and cleanup macros
are of no use and can be removed.
Mika Kuoppala [Fri, 5 Jul 2019 21:52:01 +0000 (22:52 +0100)]
drm/i915/gtt: pde entry encoding is identical
For all page directory entries, the pde encoding is
identical. Don't complicate call sites with different
versions of doing the same thing, so we always check the
existence of physical page before writing the entry into
it. This further generalizes the pd so that manipulation in
callsites will be identical, removing the need to handle
pdps differently for gen8.
drm/i915: Remove set but not used variable 'intel_dig_port'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_ddi.c: In function 'intel_ddi_get_config':
drivers/gpu/drm/i915/display/intel_ddi.c:3774:29: warning:
variable 'intel_dig_port' set but not used [-Wunused-but-set-variable]
struct intel_digital_port *intel_dig_port;
drm/i915: Remove set but not used variable 'encoder'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/i915/display/intel_dp.c: In function 'intel_dp_set_drrs_state':
drivers/gpu/drm/i915/display/intel_dp.c:6623:24: warning:
variable 'encoder' set but not used [-Wunused-but-set-variable]
It's never used, so can be removed.Also remove related
variable 'dig_port'
Chris Wilson [Fri, 5 Jul 2019 07:45:57 +0000 (08:45 +0100)]
drm/i915: Order assert forcewake test
Read the current value before computing the expected to ensure that if
the timer does complete early (against our will), it should not cause a
false positive.
v2: The local irq disable did not prevent the timer from running.
This patch adds support for DPLL4 on EHL that include the
following restrictions:
- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
DPLL4 can be used with other DDIs, including DDID
(combo port A external usage).
- DPLL4 cannot be enabled when DC5 or DC6 are enabled.
- The DPLL4 enable, lock, power enabled, and power state are connected
to the MGPLL1_ENABLE register.
v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
iterate twice: once for Combo plls and once for MG plls.
- Use MG pll funcs for DPLL4 instead of creating new ones and modify
mg_pll_enable to include the restrictions for EHL.
v3: Fix compilation error
v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL
v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
of this DPLL.
v6: rebase
v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
assoicated with DC OFF power well.
v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder
v9: (Ville)
- Move the block of code that grabs a reference to the power domain
POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
that there is a reference present before this DPLL might get disabled.
v10: rebase
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
Ville Syrjälä [Wed, 3 Jul 2019 20:08:24 +0000 (23:08 +0300)]
drm/i915: Clean up skl vs. icl plane formats
Split the format lists for different planes on skl/icl more cleanly.
On skl+ we have just two types of planes: those can do planar and
those that can't.
On icl we have three types of planes: hdr planes, sdr planes that
can do planar, and sdr planes that can't do planar. Those latter two
are the same set of planes we must when choose from when picking the
UV vs. Y plane for planar scanout. So we shall just designate
them sdr uv planes and sdr y planes.
Ville Syrjälä [Wed, 3 Jul 2019 20:08:22 +0000 (23:08 +0300)]
drm/i915: Deal with cpp==8 for g4x watermarks
Docs tell us that on g4x we have to compute the SR watermarks
using 4 bytes per pixel. I'm going to assume that only applies
to 1 and 2 byte per pixel formats, and not 8 byte per pixel
formats. That seems like a recipe for an insufficient watermark
which could lead to underruns. Use the maximum of the two numbers
instead.
Ville Syrjälä [Wed, 3 Jul 2019 20:08:21 +0000 (23:08 +0300)]
drm/i915: Program plane gamma ramps
All sprite planes have a progammable gamma ramp. Set it up with
a linear ramp on all platforms. This actually matches the reset
value but soon we'll want to reprogram this ramp on some machines,
so let's just set it up across the board.
Note that on pre-IVB the hardware bypasses the gamma unit
unless a YCbCr pixel format is used.
v2: Add parens around << in ilk_linear_gamma()
Skip gamma programming for RGB on pre-IVB
s/DVSGAMC/DVSGAMC_G4X/
Ville Syrjälä [Wed, 3 Jul 2019 20:08:19 +0000 (23:08 +0300)]
drm/i915: Add windowing for primary planes on gen2/3 and chv
Plane B and C (note that we don't actually expose plane C currently)
on gen2/3 have a window generator, as does the primary plane on CHV
pipe B. So let's allow positioning of these planes freely within the
pipe source area.
Plane A on gen2/3 seems to have some kind of partial window generator
which would allow you to cut the plane off midway through the scanout,
but it would still have to start at the top-left corner of the pipe,
and it would have to be full width. That's doesn't sound all that
useful, so for simplicity let's just keep to the idea that plane A
has to be fullscreen.
Gen4 removed the plane A/B windowing support entirely, and it wasn't
reintroduced until SKL (apart from the CHV pipe B special case).
v2: s/plane/i9xx_plane/ etc. (James)
v3: Make it less confusing
v4: Deal with IS_GEN()
drm/i915: Rework some interrupt handling functions to take intel_gt
Some interrupt handling functions already have gt in their names
suggesting them as obvious candidates to make them take struct intel_gt
instead of i915.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Co-developed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190704121756.27824-1-tvrtko.ursulin@linux.intel.com
Chris Wilson [Thu, 4 Jul 2019 20:04:55 +0000 (21:04 +0100)]
drm/i915: Show instdone for each engine in debugfs
Although polling each engine quickly is preferable as it should give us
a sample of each engine at roughly the same time, keep it simple and
just sample the engine as print out the debug state.
Chris Wilson [Thu, 4 Jul 2019 21:23:43 +0000 (22:23 +0100)]
drm/i915/selftests: Be engine agnostic
When using MI operations, we do not care which engine we use, so use
them all where possible, and where inconvenient double check we have the
engine we selected at random.
v2: Drop the local copy of engine->sseu to avoid an unchecked deref
Chris Wilson [Thu, 4 Jul 2019 20:04:53 +0000 (21:04 +0100)]
drm/i915/overlay: Stash the kernel context on initialisation
Simplify runtime request creation by storing the context we need to use
during initialisation. This allows us to remove one more hardcoded
engine lookup.
drm/i915/hangcheck: Look at instdone for all engines
It seems intel_engine_get_instdone is able to get instdone for all engines
but intel_hangcheck.c/subunits_stuck decides to ignore it for non render.
We can just drop the check in subunits_stuck since the checks on
unavailable fields will always return stuck, which when bitwise and with
the potential unstuck instdone is harmless.
Chris Wilson [Thu, 4 Jul 2019 16:53:17 +0000 (17:53 +0100)]
drm/i915/selftests: Drain the freedlists between exec passes
During the context execution tests, we issue a lot of work and discard a
lot of objects without releasing the lock and allowing the background
reaper to free those objects. Insert a small break between each pass to
flush the worker.
Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704201656.15775-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 13:58:05 +0000 (14:58 +0100)]
drm/i915/gt: Pull engine w/a initialisation into common
We need to setup the workarounds on all engines, with the knowledge
about which platforms each workaround applies to kept together in the
workaround list. As such, we can pull the w/a initialisation into the
common setup and try to avoid duplicating knowledge about when to setup
the workarounds.
Chris Wilson [Thu, 4 Jul 2019 10:43:45 +0000 (11:43 +0100)]
drm/i915/gtt: Handle double alloc failures
Matthew pointed out that we could face a double failure with concurrent
allocations/frees, and so the assumption that the local var alloc was
NULL was fraught with danger. Rather than complicate the error paths too
much to add a second local for a second free, just do the second free
earlier on the unwind path.
Chris Wilson [Wed, 3 Jul 2019 18:06:01 +0000 (19:06 +0100)]
drm/i915/gem: Defer obj->base.resv fini until RCU callback
Since reservation_object_fini() does an immediate free, rather than
kfree_rcu as normal, we have to delay the release until after the RCU
grace period has elapsed (i.e. from the rcu cleanup callback) so that we
can rely on the RCU protected access to the fences while the object is a
zombie.
i915_gem_busy_ioctl relies on having an RCU barrier to protect the
reservation in order to avoid having to take a reference and strong
memory barriers.
v2: Order is important; only release after putting the pages!
Chris Wilson [Wed, 3 Jul 2019 15:52:25 +0000 (16:52 +0100)]
drm/i915/gt: Ignore forcewake acquisition for posting_reads
We don't care about the result of the read, so it may be garbage, we
only care that the mmio is flushed. As such, we can forgo using an
individual forcewake and lock around any posting-read for an engine.
Chris Wilson [Wed, 3 Jul 2019 15:52:24 +0000 (16:52 +0100)]
drm/i915/gt: Assume we hold forcewake for execlists resume
We can assume the caller is holding a blanket forcewake for the
register writes during resume, and so we can skip taking individual
locks around each write inside execlists resume.
Chris Wilson [Wed, 3 Jul 2019 15:52:23 +0000 (16:52 +0100)]
drm/i915/gt: Use caller provided forcewake for intel_mocs_init_engine
During post-reset resume, we call intel_mocs_init_engine to reinitialise
the MOCS registers. Suprisingly, especially when enhanced by lockdep,
the acquisition of the forcewake lock around each register write takes a
substantial portion of the reset time. We don't need to use the
individual forcewake here as we can assume that the caller is holding a
blanket forcewake for the reset&resume and the resume is serialised.
Chris Wilson [Thu, 4 Jul 2019 10:20:48 +0000 (11:20 +0100)]
drm/i915: Check caller held wakerefs in assert_forcewakes_active
The intent of the assert is to document that the caller took the
appropriate wakerefs for the function. However, as Tvrtko pointed out,
we simply check whether the fw_domains are active and may be confused by
the auto wakeref which may be dropped between the check and use. Let's
be more careful in the assert and check that each fw_domain has an
explicit caller wakeref above and beyond the automatic wakeref.
v2: Fix spelling for config DRM_I915_DEBUG_RUNTIME_PM
v3: Timer may still be active after we drop the autowakeref, we need to
check domain->active instead.
v4: The timer checks domain->active, but we still need to check the
timer. (This is starting to look weird...)
Chris Wilson [Wed, 3 Jul 2019 17:19:13 +0000 (18:19 +0100)]
drm/i915: Flush the workqueue before draining
Trying to drain a workqueue while we may still be adding to it from
background tasks is, according to kernel/workqueue.c, verboten. So, add
a flush_workqueue() at the start of our cleanup procedure.
Chris Wilson [Thu, 4 Jul 2019 09:19:25 +0000 (10:19 +0100)]
drm/i915: Move the renderstate setup under gt/
The render state is used to initialise the default RCS context, and only
used during early setup from within the gt code. As such, it makes a
good candidate for placing within gt/, even if it is not yet entirely
clean of our GEM heritage.
Chris Wilson [Wed, 3 Jul 2019 17:19:12 +0000 (18:19 +0100)]
drm/i915/gtt: Defer the free for alloc error paths
If we hit an error while allocating the page tables, we have to unwind
the incomplete updates, and wish to free the unused pd. However, we are
not allowed to be hoding the spinlock at that point, and so must use the
later free to defer it until after we drop the lock.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050 Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk
Aditya Swarup [Thu, 27 Jun 2019 22:07:08 +0000 (15:07 -0700)]
drm/i915: Add N & CTS values for 10/12 bit deep color
Adding N & CTS values for 10/12 bit deep color from Appendix C
table in HDMI 2.0 spec. The correct values for N is not chosen
automatically by hardware for deep color modes.
Aditya Swarup [Thu, 27 Jun 2019 22:07:07 +0000 (15:07 -0700)]
drm/i915: Use port clock to set correct N value
Use port_clock to check the clock values in n/cts lookup table instead
of crtc_clock. As port_clock is already adjusted based on color mode set
(8 bit or deep color), this will help in checking clock values for deep
color modes from n/cts lookup table.
Ville Syrjälä [Thu, 6 Jun 2019 12:42:10 +0000 (15:42 +0300)]
drm/i915: Deal with machines that expose less than three QGV points
When SAGV is forced to disabled/min/med/max in the BIOS pcode will
only hand us a single QGV point instead of the normal three. Fix
the code to deal with that instead declaring the bandwidth limit
to be 0 MB/s (and thus preventing any planes from being enabled).
Also shrink the max_bw sturct a bit while at it, and change the
deratedbw type to unsigned since the code returns the bw as
an unsigned int.
Since we now keep track of how many qgv points we got from pcode
we can drop the earlier check added for the "pcode doesn't
support the memory subsystem query" case.
Cc: felix.j.degrood@intel.com Cc: Mark Janes <mark.a.janes@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Clint Taylor <Clinton.A.Taylor@intel.com> Fixes: c457d9cf256e ("drm/i915: Make sure we have enough memory bandwidth on ICL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110838 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190606124210.3482-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Chris Wilson [Wed, 3 Jul 2019 09:17:19 +0000 (10:17 +0100)]
drm/i915: Mark up vma->active as safe for use inside shrinkers
Since a shrinker may be forced to wait on GPU activity,
i915_active_wait(&vma->active) must be safe for use inside a shrinker,
and so let's mark up the lock as being acquired by the shrinker to avoid
any nasty surprises creeping in.
Chris Wilson [Wed, 3 Jul 2019 09:17:17 +0000 (10:17 +0100)]
drm/i915/gem: Free pages before rcu-freeing the object
As we have dropped the final reference to the object, we do not need to
wait until after the rcu grace period to drop its pages. We still require
struct_mutex to completely unbind the object to release the pages, so we
still need a free-worker to manage that from process context. By
scheduling the release of pages before waiting for the rcu should mean
that we are not trapping those pages from beyond the reach of the
shrinker.
v2: Pass along the request to skip if the vma is busy to the underlying
unbind routine, to avoid checking the reservation underneath the
i915->mm.obj_lock which may be used from inside irq context.
v3: Flip the bit for unbinding while active, for later convenience.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111035 Fixes: a93615f900bd ("drm/i915: Throw away the active object retirement complexity") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703091726.11690-6-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Jul 2019 09:17:20 +0000 (10:17 +0100)]
drm/i915/execlists: Hesitate before slicing
Be a little more hesitant before injecting a timeslice, and try to take
into account any change in priority that is due for the running task
before switching to another task. This will allow us to arbitrarily
prevent switching away from a request if we deem it necessarily to
disable preemption, for instance.
Chris Wilson [Wed, 3 Jul 2019 09:17:12 +0000 (10:17 +0100)]
drm/i915/selftests: Common live setup/teardown
We frequently, but not frequently enough!, remember to flush residual
operations and objects at the end of a live subtest. The purpose is to
cleanup after every subtest, leaving a clean slate for the next subtest,
and perform early detection of leaky state. As this should ideally be
common for all live subtests, pull the task into a common teardown
routine.
Chris Wilson [Tue, 2 Jul 2019 14:09:50 +0000 (15:09 +0100)]
drm/i915/display: Handle lost primary_port across suspend
icl-dsi is dying on suspend/resume at
RIP: 0010:icl_update_active_dpll+0x2c/0xa0 [i915]
which appears due to the loss of the time primary_port across suspend.
Protect against the potential NULL dereference by assuming
ICL_PORT_DPLL_DEFAULT unless the port is actively specified otherwise.
Ville Syrjälä [Tue, 2 Jul 2019 15:17:23 +0000 (18:17 +0300)]
drm/i915: synchronize_irq() against the actual irq
When eliminating our use of drm_irq_install() I failed to convert
all our synchronize_irq() calls to consult pdev->irq instead of
dev_priv->drm.irq. As we no longer populate dev_priv->drm.irq
we're no longer synchronizing against anything.
v2: Add intel_syncrhonize_irq() (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Imre Deak <imre.deak@intel.com> Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111012 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190702151723.29739-1-ville.syrjala@linux.intel.com
drm/i915/gtt: Don't check PPGTT presence on PPGTT-only platforms
We missed one place where we check PPGTT-only platform for PPGTT
presence. Let's remove it.
While I'm here let's assert that this particular code is never called on
pre-gen8 platforms.
It's been over a year since this was merged, and the actual users of
intel_ppat_get / intel_ppat_put never materialized.
Time to remove it!
v2: Unbreak suspend (Chris)
v3: Rebase, drop fixes tag to avoid confusion
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190702113149.21200-1-michal.winiarski@intel.com
Mika Kuoppala [Mon, 1 Jul 2019 10:44:42 +0000 (13:44 +0300)]
drm/i915: Fix memleak in runtime wakeref tracking
If we untrack wakerefs, the actual count may reach zero.
However the krealloced owners array is still there and
needs to be taken care of. Free the owners unconditionally
to fix the leak.
Fixes: bd780f37a361 ("drm/i915: Track all held rpm wakerefs") Reported-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190701104442.9319-1-mika.kuoppala@linux.intel.com
The same tests failing on CFL+ platforms are also failing on ICL.
Documentation doesn't list the
WaAllowPMDepthAndInvocationCountAccessFromUMD workaround for ICL but
applying it fixes the same tests as CFL.
drm/i915: fix whitelist selftests with readonly registers
When a register is readonly there is not much we can tell about its
value (apart from its default value?). This can be covered by tests
exercising the value of the register from userspace.
For PS_INVOCATION_COUNT we've got the following piglit tests :
Chris Wilson [Tue, 2 Jul 2019 09:21:17 +0000 (10:21 +0100)]
drm/i915: Report if i915_active is still busy upon waiting
If we try to wait on an i915_active from within a critical section, it
will remain busy (such as if we are shrinking from within
i915_active_ref). Report the failure so that we do not proceed thinking
it is idle.
Extracted from a future patch "drm/i915: Coordinate i915_active with its
own mutex".
Chris Wilson [Mon, 1 Jul 2019 10:04:54 +0000 (11:04 +0100)]
drm/i915/execlists: Refactor CSB state machine
Daniele pointed out that the CSB status information will change with
Tigerlake and suggested that we could rearrange our state machine to
hide the differences in generation. gcc also prefers the explicit state
machine, so make it so:
process_csb 1980 1967 -13
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190701100502.15639-4-chris@chris-wilson.co.uk
Matt Roper [Wed, 26 Jun 2019 00:03:50 +0000 (17:03 -0700)]
drm/i915/ehl: Don't program PHY_MISC on EHL PHY C
Although EHL added a third combo PHY, no PHY_MISC register was added for
PHY C. The bspec indicates that there's no need to program the "DE to
IO Comp Pwr Down" setting for this PHY that we usually need to set in
PHY_MISC.
v2:
- Add IS_ELKHARTLAKE() guards since future platforms that have a PHY C
are likely to reinstate the PHY_MISC register. (Jose)
- Use goto's to skip PHY_MISC programming & minimize code deltas. (Jose)
Chris Wilson [Mon, 1 Jul 2019 10:04:51 +0000 (11:04 +0100)]
drm/i915/guc: Avoid reclaim locks during reset
During reset, we must be very selective in which locks we take as most
are tainted by being held across a wait or reclaim (kmalloc) which
implicitly waits. Inside the guc reset path, we reset the ADS to sane
defaults, but must keep it pinned from initialisation to avoid having to
pin it during reset.
Imre Deak [Fri, 28 Jun 2019 14:36:35 +0000 (17:36 +0300)]
drm/i915: WARN about invalid lane reversal in TBT-alt/DP-alt modes
Lane reversal happens only in the FIA module for TBT-alt/DP-alt mode, so
WARN if lane reversal is attempted at a different level. See the
BSpec DDI_BUF_CTL register description.
Imre Deak [Fri, 28 Jun 2019 14:36:34 +0000 (17:36 +0300)]
drm/i915: Remove unneeded disconnect in TypeC legacy port mode
Disconnecting the TypeC PHY when the port is in legacy mode is not
necessary:
- BSpec doesn't specify a disconnect sequence for legacy mode.
- The use of the PHY is dedicated for the display in legacy mode.
- We keep the PHY always connected during runtime as well in legacy
mode.
We disconnect the PHY when needed during a disabling modeset for the
port, so we can also remove the disconnect call from the destroy hook.
Imre Deak [Fri, 28 Jun 2019 14:36:33 +0000 (17:36 +0300)]
drm/i915: Add state verification for the TypeC port mode
Add state verification for the TypeC port mode wrt. the port's AUX power
well enabling/disabling. Also check the correctness of changing the port
mode:
- When enabling/disabling the AUX power well for a TypeC port we must hold
the TypeC port lock - the case for AUX transfers - or hold a Type C
port link reference - the case for modeset enabling/disabling.
- When changing the TypeC port mode the port's AUX power domain must be
disabled.
v2: (Ville)
- Simplify power_well_async_ref_count().
- Fix the commit log, clarifying what are the valid conditions to
enable/disable the AUX power wells.
Imre Deak [Fri, 28 Jun 2019 14:36:32 +0000 (17:36 +0300)]
drm/i915: Keep the TypeC port mode fixed when the port is active
The TypeC port mode needs to stay fixed whenever the port is active. Do
that by introducing a tc_link_refcount to account for active ports,
avoiding changing the port mode if a reference is held.
During the modeset commit phase we also have to reset the port mode and
update the active PLL reflecting the new port mode. We can do this only
once the port and its old PLL has been already disabled. Add the new
encoder update_prepare/complete hooks that are called around the whole
enabling sequence. The TypeC specific hooks of these will reset the port
mode, update the active PLL if the port will be active and ensure that
the port mode will stay fixed for the duration of the whole enabling
sequence by holding a tc_link_refcount.
During the port enabling, the pre_pll_enable/post_pll_disable hooks will
take/release a tc_link_refcount to ensure the port mode stays fixed
while the port is active.
Changing the port mode should also be avoided during connector detection
and AUX transfers if the port is active, we'll do that by checking the
port's tc_link_refcount.
When resetting the port mode we also have to take into account the
maximum lanes provided by the FIA. It's guaranteed to be 4 in TBT-alt
and legacy modes, but there may be less lanes available in DP-alt mode,
in which case we have to fall back to TBT-alt mode.
While at it also update icl_tc_phy_connect()'s code comment, reflecting
the current way of switching the port mode.
v2:
- Add the update_prepare/complete hooks to the encoder instead of the
connector. (Ville)
- Simplify intel_connector_needs_modeset() by removing redundant if.
(Ville)
v3:
- Fix sparse warning, marking static functions as such.
v4:
- Rebase on drm-tip.
Imre Deak [Fri, 28 Jun 2019 14:36:31 +0000 (17:36 +0300)]
drm/i915/icl: Reserve all required PLLs for TypeC ports
When enabling a TypeC port we need to reserve all the required PLLs for
it, the TBT PLL for TBT-alt and the MG PHY PLL for DP-alt/legacy sinks.
We can select the proper PLL for the current port mode from the reserved
PLLs only once we selected and locked down the port mode for the whole
duration of the port's active state. Resetting and locking down the port
mode can in turn happen only during the modeset commit phase once we
disabled the given port and the PLL it used.
To support the above reserve-and-select PLL semantic we store the
reserved PLLs along with their HW state in the CRTC state and provide a
way to select the active PLL from these. The selected PLL along with its
HW state will be pointed at by crtc_state->shared_dpll/dpll_hw_state as
in the case of other port types.
Besides reserving all required PLLs no functional changes.
v2:
- Fix releasing the ICL PLLs, not clearing the PLLs from the old
crtc_state.
- Init port_dpll to ICL_PORT_DPLL_DEFAULT closer to where port_dpll is
used for symmetry with the corresponding ICL_PORT_DPLL_MG_PHY init.
(Ville)
v3:
- Add FIXME: for clearing the ICL port PLLs from the new crtc state.
Imre Deak [Fri, 28 Jun 2019 14:36:29 +0000 (17:36 +0300)]
drm/i915: Sanitize the shared DPLL find/reference interface
Pass the PLL HW state to the PLL find/reference functions making it
clearer what is their input. Also pass to these the atomic state and the
CRTC object instead of the CRTC state, since they don't require the
latter.
Move setting the PLL in the crtc_state to the get_dpll() hook, which
is the more logical place for this, where the related PLL HW state was also
set.
This refactoring is also a preparation for a follow-up patch that will
have to find/reference multiple PLLs.
Imre Deak [Fri, 28 Jun 2019 14:36:28 +0000 (17:36 +0300)]
drm/i915: Sanitize the shared DPLL reserve/release interface
For consistency s/intel_get_shared_dpll()/intel_reserve_shared_dplls()/
to better match intel_release_shared_dplls(). Also, pass to the
reserve/release and get_dplls/put_dplls hooks the intel_atomic_state and
CRTC object, that way these functions can look up the old or new state
as needed.
Also release the PLLs from the atomic state via a new
put_dplls->intel_unreference_shared_dpll() call chain for better
symmetry with the reservation via the
get_dplls->intel_reference_shared_dpll() call chain.
Since nothing uses the PLL returned by intel_reserve_shared_dplls(),
make it return only a bool.
While at it also clarify the reserve/release function docbook headers
making it clear that multiple DPLLs will be reserved/released and
whether the new or old atomic CRTC state is affected.
This refactoring is also a preparation for a follow-up change that needs
to reserve multiple DPLLs.
Kudos to Ville for the idea to pass intel_atomic_state around, to make
things clearer locally where an object's old/new atomic state is
required.
No functional changes.
v2:
- Fix checkpatch issue: typo in code comment.
v3:
- Rebase on drm-tip.
Imre Deak [Fri, 28 Jun 2019 14:36:26 +0000 (17:36 +0300)]
drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers
We must keep the TypeC port mode fixed for the duration of the connector
detection and each AUX transfers. Add a new TypeC lock holding it around
these two sequences. For consistency also hold the lock during the port
mode sanitization.
Whenever resetting the port mode (only during the detection for now) the
port's AUX power domain must be disabled already. Flush the async power
domain disabling work to ensure this.
A follow-up patch will make the port mode changing more robust by
postponing the change for active ports.
v2:
- Fix checkpatch issue: missing annotation for tc_lock.
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-15-imre.deak@intel.com
Imre Deak [Fri, 28 Jun 2019 14:36:25 +0000 (17:36 +0300)]
drm/i915: Fix the TypeC port mode sanitization during loading/resume
For using the correct AUX power domains we have to sanitize the TypeC
port mode early, so move that before encoder sanitization. To do this
properly read out the actual port mode instead of just relying on the
VBT legacy port flag (which can be incorrect).
We also verify that the PHY is connected as expected if the port is
active. In case the port is inactive we connect the PHY in case of a
legacy port - as we did so far. The PHY will be connected during
detection for DP-alt mode - as it was done so far. For TBT-alt mode
nothing needs to be done to connect the PHY.
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Detect TCCOLD any time PORT_TX_DFLEXDPCSSS is read. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-14-imre.deak@intel.com
Imre Deak [Fri, 28 Jun 2019 14:36:24 +0000 (17:36 +0300)]
drm/i915: Sanitize the TypeC connect/detect sequences
Make the order during detection more consistent: first reset the TypeC
port mode if needed (adding new helpers for this), then detect any
connected sink.
To check if a port mode reset is needed determine first the target port
mode based on the live status if a sink is already connected or the
PHY status complete flag otherwise.
Add a WARN in legacy mode if unexpectedly we can't set the unsafe mode
or if the FIA doesn't provide the 4 lanes required.
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-13-imre.deak@intel.com
Imre Deak [Fri, 28 Jun 2019 14:36:23 +0000 (17:36 +0300)]
drm/i915: Handle the TCCOLD power-down event
Based on a recent BSpec update (Index/21750) we must handle the TCCOLD
event associated with the DP-alt mode. We can detect this event by
reading an invalid all-1s value from FIA registers.
After detecting TCCOLD we will:
- fall back to TBT-alt mode when attempting to switch to DP-alt mode
- conclude that nothing is connected during live status detection
- WARN when already in unsafe mode, since then TCCOLD is unexpected
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
v3:
- Use 0xffffffff instead of -1 as invalid FIA reg value.
(José, Ville)
- Check for TCCOLD in icl_tc_phy_status_complete() too. (Ville)
Imre Deak [Fri, 28 Jun 2019 14:36:22 +0000 (17:36 +0300)]
drm/i915: Wait for TypeC PHY complete flag to clear in safe mode
The PHY status complete flag normally clears when disconnecting the PHY
in DP-alt mode (achieved by switching to safe mode), so wait for the
flag to clear.
v2:
- Use DRM_DEBUG_KMS instead of DRM_DEBUG_DRIVER. (José)
Imre Deak [Fri, 28 Jun 2019 14:36:21 +0000 (17:36 +0300)]
drm/i915: Factor out common parts from TypeC port handling functions
Factor out helpers reading/parsing the TypeC specific registers, making
current users of them clearer and letting us use them later.
While at it also:
- Simplify icl_tc_phy_connect() with an early return in legacy mode.
- Simplify the live status check using one bitmask for all HPD bits.
- Remove a micro-optimisation of the repeated safe-mode clearing.
- Make sure we fix the legacy port flag in all cases.
Except for the last two, no functional changes.
v2:
- Don't do reg reads at variable declarations. (Jani)
- Prevent constant truncated compiler warning when assigning the
valid_hpd_mask. (Nick)
- s/intel_tc_port_get_lane_info/intel_tc_port_get_lane_mask/ (Ville)
v3:
- Make valid_hpd_mask init clear. (Ville)
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-10-imre.deak@intel.com
Imre Deak [Fri, 28 Jun 2019 14:36:18 +0000 (17:36 +0300)]
drm/i915: Fix the TBT AUX power well enabling
Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL
register.
Fixes: c7375d9542f1 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com
projects / mirror_ubuntu-hirsute-kernel.git / log