We're starting from a TXQ label, not a TXQ type, so
efx_channel_get_tx_queue() is inappropriate. This worked by chance,
because labels and types currently match on EF10, but we shouldn't
rely on that.
Fixes: 12804793b17c ("sfc: decouple TXQ type from label") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Currently when the call to usb_urb_ep_type_check fails (returning -EINVAL)
the error return path returns -ENOMEM via the exit label "error". Other
uses of the same error exit label set the err variable to -ENOMEM but this
is not being used. I believe the original intent was for the error exit
path to return the value in err rather than the hard coded -ENOMEM, so
return this rather than the hard coded -ENOMEM.
Addresses-Coverity: ("Unused value") Fixes: 738d9edcfd44 ("ALSA: usb-audio: Add sanity checks for invalid EPs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210420134719.381409-1-colin.king@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
missing qpid increment leads to skipping few qpids while allocating QP.
This eventually leads to adapter running out of qpids after establishing
fewer connections than it actually supports.
Current patch increments the qpid correctly.
Commit 38ec4944b593 ("gro: ensure frag0 meets IP header alignment")
did the right thing, but missed the fact that napi_gro_frags() logics
calls for skb_gro_reset_offset() *before* pulling Ethernet header
to the skb linear space.
That said, the introduced check for frag0 address being aligned to 4
always fails for it as Ethernet header is obviously 14 bytes long,
and in case with NET_IP_ALIGN its start is not aligned to 4.
Fix this by adding @nhoff argument to skb_gro_reset_offset() which
tells if an IP header is placed right at the start of frag0 or not.
This restores Fast GRO for napi_gro_frags() that became very slow
after the mentioned commit, and preserves the introduced check to
avoid silent unaligned accesses.
From v1 [0]:
- inline tiny skb_gro_reset_offset() to let the code be optimized
more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- pull in Reviewed-by from Eric.
Fixes: 38ec4944b593 ("gro: ensure frag0 meets IP header alignment") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The former fix only papered over the actual problem: the
ethernet core expects the netdev .dev member to have the
proper DMA masks set, or there will be BUG_ON() triggered
in kernel/dma/mapping.c.
Fix this by simply copying dma_mask and dma_mask_coherent
from the parent device.
Fixes: e45d0fad4a5f ("net: ethernet: ixp4xx: Use parent dev for DMA pool") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When initializing the __param array with a one liner, if all args are
const, the initial array value will be placed in the rodata section but
because libbpf does not support relocation in the rodata section, any
pointer in this array will stay NULL.
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.
VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:
qp_alloc_hypercall result = -20
Could not attach to queue pair with -20
"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c3307
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.
Since the error message can be useful in some cases, print it only once.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The nftables offload parser sets FLOW_DISSECTOR_KEY_BASIC .n_proto to the
ethertype field in the ethertype frame. However:
- FLOW_DISSECTOR_KEY_BASIC .n_proto field always stores either IPv4 or IPv6
ethertypes.
- FLOW_DISSECTOR_KEY_VLAN .vlan_tpid stores either the 802.1q and 802.1ad
ethertypes. Same as for FLOW_DISSECTOR_KEY_CVLAN.
This function adjusts the flow dissector to handle two scenarios:
1) FLOW_DISSECTOR_KEY_VLAN .vlan_tpid is set to 802.1q or 802.1ad.
Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the
FLOW_DISSECTOR_KEY_CVLAN .tpid
- the original FLOW_DISSECTOR_KEY_CVLAN .tpid to the .n_proto field.
2) .n_proto is set to 802.1q or 802.1ad. Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the .n_proto field.
In mwl8k_probe_hw, hw->priv->txq is freed at the first time by
dma_free_coherent() in the call chain:
if(!priv->ap_fw)->mwl8k_init_txqs(hw)->mwl8k_txq_init(hw, i).
Then in err_free_queues of mwl8k_probe_hw, hw->priv->txq is freed
at the second time by mwl8k_txq_deinit(hw, i)->dma_free_coherent().
My patch set txq->txd to NULL after the first free to avoid the
double free.
Fixes: a66098daacee2 ("mwl8k: Marvell TOPDOG wireless driver") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210402182627.4256-1-lyl2019@mail.ustc.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
While adding the invalid IRQ check after calling platform_get_irq(),
I managed to overlook that the driver has a complex error path in its
probe() method, thus a simple *return* couldn't be used. Use a proper
*goto* instead!
gcc complains about undefined behavior in calling snprintf()
with the same buffer as input and output:
drivers/net/wireless/ti/wl18xx/debugfs.c: In function 'diversity_num_of_packets_per_ant_read':
drivers/net/wireless/ti/wl18xx/../wlcore/debugfs.h:86:3: error: 'snprintf' argument 4 overlaps destination object 'buf' [-Werror=restrict]
86 | snprintf(buf, sizeof(buf), "%s[%d] = %d\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
87 | buf, i, stats->sub.name[i]); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:24:2: note: in expansion of macro 'DEBUGFS_FWSTATS_FILE_ARRAY'
24 | DEBUGFS_FWSTATS_FILE_ARRAY(a, b, c, wl18xx_acx_statistics)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ti/wl18xx/debugfs.c:159:1: note: in expansion of macro 'WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY'
159 | WL18XX_DEBUGFS_FWSTATS_FILE_ARRAY(diversity, num_of_packets_per_ant,
There are probably other ways of handling the debugfs file, without
using on-stack buffers, but a simple workaround here is to remember the
current position in the buffer and just keep printing in there.
Fixes: bcca1bbdd412 ("wlcore: add debugfs macro to help print fw statistics arrays") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210323125723.1961432-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The signal strength of 5G is quite low, so user can't connect to an AP far
away. New parameters with new format and its parser are updated by the commit 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but
some parameters are missing. Use this commit to update to the novel parameters
that use new format.
Fixes: 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
If the VM entry/exit controls for loading/saving MSR_EFER are either
not available (an older processor or explicitly disabled) or not
used (host and guest values are the same), reading GUEST_IA32_EFER
from the VMCS returns an inaccurate value.
Because of this, in dump_vmcs() don't use GUEST_IA32_EFER to decide
whether to print the PDPTRs - always do so if the fields exist.
Fixes: 4eb64dce8d0a ("KVM: x86: dump VMCS on invalid entry") Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-2-david.edmondson@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Daniel reported that with Commit 4ca234a9cbd7 ("powerpc/smp: Stop
updating cpu_core_mask") QEMU was unable to set single NUMA node SMP
topologies such as:
-smp 8,maxcpus=8,cores=2,threads=2,sockets=2
i.e he expected 2 sockets in one NUMA node.
The above commit helped to reduce boot time on Large Systems for
example 4096 vCPU single socket QEMU instance. PAPR is silent on
having more than one socket within a NUMA node.
cpu_core_mask and cpu_cpu_mask for any CPU would be same unless the
number of sockets is different from the number of NUMA nodes.
One option is to reintroduce cpu_core_mask but use a slightly
different method to arrive at the cpu_core_mask. Previously each CPU's
chip-id would be compared with all other CPU's chip-id to verify if
both the CPUs were related at the chip level. Now if a CPU 'A' is
found related / (unrelated) to another CPU 'B', all the thread
siblings of 'A' and thread siblings of 'B' are automatically marked as
related / (unrelated).
Also if a platform doesn't support ibm,chip-id property, i.e its
cpu_to_chip_id returns -1, cpu_core_map holds a copy of
cpu_cpu_mask().
Fixes: 4ca234a9cbd7 ("powerpc/smp: Stop updating cpu_core_mask") Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210415120934.232271-2-srikar@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").
Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.
In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set
resource limits")
So just stop using of_pci_range_to_resource, which does not work for
MIPS.
We should return -EINVAL instead of success if the "limit" is too high.
Fixes: e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
After gnulib update sed stopped matching `[[:space:]]*+' as before,
causing the following compilation error:
In file included from builtin-trace.c:719:
trace/beauty/generated/fsconfig_arrays.c:2:3: error: expected expression before ']' token
2 | [] = "",
| ^
trace/beauty/generated/fsconfig_arrays.c:2:3: error: array index in initializer not of integer type
trace/beauty/generated/fsconfig_arrays.c:2:3: note: (near initialization for 'fsconfig_cmds')
Fix this by correcting the regular expression used in the generator.
Also, clean up the script by removing redundant egrep, xargs, and printf
invocations.
The intel_gvt_init_vgpu_type_groups() function is only called from
intel_gvt_init_device(). If it fails then the intel_gvt_init_device()
prints the error code and propagates it back again. That's a bug
because false is zero/success. The fix is to modify it to return zero
or negative error codes and make everything consistent.
Fixes: c5d71cb31723 ("drm/i915/gvt: Move vGPU type related code into gvt file") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/YHaFQtk/DIVYK1u5@mwanda Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT
is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended
to be a bit-flag. Fix this by using the == operator as was originally
intended.
Addresses-Coverity: ("Logically dead code") Fixes: 7dfee4b1d79e ("net/mlx5: IPsec, Refactor SA handle creation and destruction") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When under xmon, the "dxi" command dumps the state of the XIVE
interrupts. If an interrupt number is specified, only the state of
the associated XIVE interrupt is dumped. This form of the command
lacks an irq_data parameter which is nevertheless used by
xmon_xive_get_irq_config(), leading to an xmon crash.
Fix that by doing a lookup in the system IRQ mapping to query the IRQ
descriptor data. Invalid interrupt numbers, or not belonging to the
XIVE IRQ domain, OPAL event interrupt number for instance, should be
caught by the previous query done at the firmware level.
Fixes: 97ef27507793 ("powerpc/xive: Fix xmon support on the PowerNV platform") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210331144514.892250-8-clg@kaod.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Yoyo based debug is not applicable to old devices. As init debug is
enabled by default in the driver, it needs to be disabled to work the
old debug mechanism in old devices.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with the
invalid IRQ #s.
V3U creates spurious interrupts which we need to handle. This costs time
until BUS_PHASE_DATA can be activated which is problematic for Gen2 SoCs
and earlier. Because of this we introduce two interrupt handlers here
which will call a generic main irq function once the timing critical
stuff is done.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: ba92222ed63a ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
A session can be removed dynamically by sysfs interface "remove_path" that
eventually calls rtrs_clt_remove_path_from_sysfs function. The current
rtrs_clt_remove_path_from_sysfs first removes the sysfs interfaces and
frees sess->stats object. Second it removes the session from the active
list.
Therefore some functions could access non-connected session and access the
freed sess->stats object even-if they check the session status before
accessing the session.
For instance rtrs_clt_request and get_next_path_min_inflight check the
session status and try to send IO to the session. The session status
could be changed when they are trying to send IO but they could not catch
the change and update the statistics information in sess->stats object,
and generate use-after-free problem.
(see: "RDMA/rtrs-clt: Check state of the rtrs_clt_sess before reading its
stats")
This patch changes the rtrs_clt_remove_path_from_sysfs to remove the
session from the active session list and then destroy the sysfs
interfaces.
Each function still should check the session status because closing or
error recovery paths can change the status.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality") Link: https://lore.kernel.org/r/20210412084002.33582-1-gi-oh.kim@ionos.com Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The shifting of the u8 integers rq->caching by 26 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that rq->caching is
greater than 0x1f then all then all the upper 32 bits of
the u64 end up as also being set because of the int
sign-extension. Fix this by casting the u8 values to a
u64 before the 26 bit left shift.
Addresses-Coverity: ("Unintended sign extension") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The shifting of the u8 integers f->fs.nat_lip[] by 24 bits to
the left will be promoted to a 32 bit signed int and then
sign-extended to a u64. In the event that the top bit of the u8
is set then all then all the upper 32 bits of the u64 end up as
also being set because of the sign-extension. Fix this by
casting the u8 values to a u64 before the 24 bit left shift.
Addresses-Coverity: ("Unintended sign extension") Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The test in ovl_dentry_version_inc() was out-dated and did not include
the case where readdir cache is used on a non-merge dir that has origin
xattr, indicating that it may contain leftover whiteouts.
To make the code more robust, use the same helper ovl_dir_is_real()
to determine if readdir cache should be used and if readdir cache should
be invalidated.
Fixes: b79e05aaa166 ("ovl: no direct iteration for dir with origin xattr") Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxht70nODhNHNwGFMSqDyOKLXOKrY0H6g849os4BQ7cokA@mail.gmail.com/ Cc: Chris Murphy <lists@colorremedies.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The host CTRL (runlatch) value is not restored after guest exit. The
host CTRL should always be 1 except in CPU idle code, so this can result
in the host running with runlatch clear, and potentially switching to
a different vCPU which then runs with runlatch clear as well.
This has little effect on P9 machines, CTRL is only responsible for some
PMU counter logic in the host and so other than corner cases of software
relying on that, or explicitly reading the runlatch value (Linux does
not appear to be affected but it's possible non-Linux guests could be),
there should be no execution correctness problem, though it could be
used as a covert channel between guests.
There may be microcontrollers, firmware or monitoring tools that sample
the runlatch value out-of-band, however since the register is writable
by guests, these values would (should) not be relied upon for correct
operation of the host, so suboptimal performance or incorrect reporting
should be the worst problem.
Fixes: 95a6432ce9038 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210412014845.1517916-2-npiggin@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Use the additional memory barrier to ensure the skb list up-to-date
between the skb producer and consumer to avoid the invalid skb content
written into sdio controller and then cause device hang due to mcu assert
caught by WR_TIMEOUT_INT.
Fixes: 1522ff731f84 ("mt76: mt7663s: introduce sdio tx aggregation") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
HW beacon filter command is being applied until we're in associated state
because the command would rely on the associated access point's beacon
interval and DTIM information.
Fixes: 7124198ab1a4 ("mt76: mt7615: enable beacon filtering by default for offload fw") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Since mt76_txq_send_burst routine can report a negative error code,
check the returned value before incrementing the number of transmitted
frames in mt76_txq_schedule_list routine.
Return -EBUSY directly if the device is in reset or in power management.
Fixes: 90fdc1717b186 ("mt76: use mac80211 txq scheduling") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Instead of holding it for the duration of an entire station schedule run,
which can block out competing tasks for a significant amount of time,
only hold it for scheduling one batch of packets for one station.
Improves responsiveness under load
Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In order to properly report MIB counters to mac80211, resets stats in
mt7915_get_stats routine() and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7915_mac_update_mib_stats routine.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In order to properly report MIB counters to mac80211, resets stats in
mt7615_get_stats routine and hold mt76 mutex accessing MIB counters.
Sum up MIB counters in mt7615_mac_update_mib_stats routine.
Fixes: c388d8584bc83 ("mt76: mt7615: add a get_stats() callback") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Reported-by: Ben Greear <greearb@candelatech.com> Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The first pointer in the txp needs to be unmapped as well, otherwise it will
leak DMA mapping entries
Fixes: 27d5c528a7ca ("mt76: fix double DMA unmap of the first buffer on 7615/7915") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Currently the expression ~nic_conf1 is always true because nic_conf1
is a u16 and according to 6.5.3.3 of the C standard the ~ operator
promotes the u16 to an integer before flipping all the bits. Thus
the top 16 bits of the integer result are all set so the expression
is always true. If the intention was to flip all the bits of nic_conf1
then casting the integer result back to a u16 is a suitabel fix.
Interestingly static analyzers seem to thing a bitwise ! should be
used instead of ~ for this scenario, so I think the original intent
of the expression may need some extra consideration.
Addresses-Coverity: ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The sscanf() function returns the number of matches (0 or 1 in this
case). It doesn't return error codes. We should return -EINVAL if the
string is invalid
Fixes: c376c1fc87b7 ("rtw88: add h2c command in debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YE8nmatMDBDDWkjq@mwanda Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
A previous commit removed a call to xfs_attr3_leaf_read that
assigned an error return code to variable error. We now have
a few early error return paths to label 'out' that return
error if error is set; however error now is uninitialized
so potentially garbage is being returned. Fix this by setting
error to zero to restore the original behaviour where error
was zero at the label 'restart'.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When querying QP, the ULPs should be informed of the max length of inline
data supported by the hardware.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC") Link: https://lore.kernel.org/r/1617354454-47840-3-git-send-email-liweihang@huawei.com Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Commit 08ed77e414ab2342 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":
$ perf list --details
...
l2_cache_accesses_from_l2_hwpf
[L2 Cache Accesses from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
l2_cache_hits_from_l2_hwpf
[L2 Cache Hits from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...
This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.
Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.
Before:
# perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1
Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.
Fixes: 08ed77e414ab ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning. Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.
When neither CONFIG_PCI nor CONFIG_IBMVIO is set/enabled, iommu.c has a
build error. The fault injection code is not useful in that kernel config,
so make the FAIL_IOMMU option depend on PCI || IBMVIO.
Prevents this build error (warning escalated to error):
../arch/powerpc/kernel/iommu.c:178:30: error: 'fail_iommu_bus_notifier' defined but not used [-Werror=unused-variable]
178 | static struct notifier_block fail_iommu_bus_notifier = {
Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210404192623.10697-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The power PMU group constraints includes check for EBB events to make
sure all events in a group must agree on EBB. This will prevent
scheduling EBB and non-EBB events together. But in the existing check,
settings for constraint mask and value is interchanged. Patch fixes the
same.
Before the patch, PMU selftest "cpu_event_pinned_vs_ebb_test" fails with
below in dmesg logs. This happens because EBB event gets enabled along
with a non-EBB cpu event.
[35600.453346] cpu_event_pinne[41326]: illegal instruction (4)
at 10004a18 nip 10004a18 lr 100049f8 code 1 in
cpu_event_pinned_vs_ebb_test[10000000+10000]
Test results after the patch:
$ ./pmu/ebb/cpu_event_pinned_vs_ebb_test
test: cpu_event_pinned_vs_ebb
tags: git_version:v5.12-rc5-93-gf28c3125acd3-dirty
Binding to cpu 8
EBB Handler is at 0x100050c8
read error on event 0x7fffe6bd4040!
PM_RUN_INST_CMPL: result 9872 running/enabled 37930432
success: cpu_event_pinned_vs_ebb
This bug was hidden by other logic until commit 1908dc911792 (perf:
Tweak perf_event_attr::exclusive semantics).
Fixes: 4df489991182 ("powerpc/perf: Add power8 EBB support") Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Mention commit 1908dc911792] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1617725761-1464-1-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In hash__mark_rodata_ro() we pass the raw PP_RXXX value to
hash__change_memory_range(). That has the effect of setting the key to
zero, because PP_RXXX contains no key value.
Fix it by using htab_convert_pte_flags(), which knows how to convert a
pgprot into a pp value, including the key.
Fixes: d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/20210331003845.216246-3-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89dc ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
When adding a PTE a ptesync is needed to order the update of the PTE
with subsequent accesses otherwise a spurious fault may be raised.
radix__set_pte_at() does not do this for performance gains. For
non-kernel memory this is not an issue as any faults of this kind are
corrected by the page fault handler. For kernel memory these faults
are not handled. The current solution is that there is a ptesync in
flush_cache_vmap() which should be called when mapping from the
vmalloc region.
However, map_kernel_page() does not call flush_cache_vmap(). This is
troublesome in particular for code patching with Strict RWX on radix.
In do_patch_instruction() the page frame that contains the instruction
to be patched is mapped and then immediately patched. With no ordering
or synchronization between setting up the PTE and writing to the page
it is possible for faults.
As the code patching is done using __put_user_asm_goto() the resulting
fault is obscured - but using a normal store instead it can be seen:
This results in the kind of issue reported here:
https://lore.kernel.org/linuxppc-dev/15AC5B0E-A221-4B8C-9039-FA96B8EF7C88@lca.pw/
Chris Riedl suggested a reliable way to reproduce the issue:
$ mount -t debugfs none /sys/kernel/debug
$ (while true; do echo function > /sys/kernel/debug/tracing/current_tracer ; echo nop > /sys/kernel/debug/tracing/current_tracer ; done) &
Turning ftrace on and off does a large amount of code patching which
in usually less then 5min will crash giving a trace like:
Given that there in no init for the mmu_notifier, a kzalloc() should
be used to insure that any newly added fields are given a predictable
initial value of zero.
Fixes: 06e0ffa69312 ("IB/hfi1: Re-factor MMU notification code") Link: https://lore.kernel.org/r/1617026056-50483-9-git-send-email-dennis.dalessandro@cornelisnetworks.com Reviewed-by: Adam Goldman <adam.goldman@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port
(a u16) left 24 places. There are two subtle issues here, first the
shift gets promoted to an signed int and then sign extended to a u64.
If oct->pcie_port is 0x80 or more then the upper bits get sign extended
to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it
needs to be cast to a u64 for all the bits to not overflow.
It is entirely possible that the u16 port value is never large enough
for this to fail, but it is useful to fix unintended overflows such
as this.
Fix this by casting the port parameter to the macro to a u64 before
the shift.
Addresses-Coverity: ("Unintended sign extension") Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The 'single_cpu' local variable is assigned by asoc_simple_parse_dai()
and later used in a asoc_simple_canonicalize_cpu() call, assuming the
entire function did not exit on errors.
However the first function returns 0 if passed device_node is NULL,
thus leaving the variable uninitialized and reporting success.
Addresses-Coverity: Uninitialized scalar variable Fixes: 8f7f298a3337 ("ASoC: simple-card-utils: separate asoc_simple_card_parse_dai()") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20210407092027.60769-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Mapping the mic-mute button to KEY_MICMUTE is technically correct but
KEY_MICMUTE translates to a scancode of 256 (248 + 8) under X,
which does not fit in 8 bits, so it does not work.
Because of this userspace is expecting KEY_F20 instead,
theoretically KEY_MICMUTE should work under Wayland but even
there it does not work, because the desktop-environment is
listening only for KEY_F20 and not for KEY_MICMUTE.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support") Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The HID lenovo probe function only attaches drvdata to one of the
USB interfaces, but lenovo_event() will get called for all USB interfaces
to which hid-lenovo is bound.
This allows a malicious device to fake being a device handled by
hid-lenovo, which generates events for which lenovo_event() has
special handling (and thus dereferences hid_get_drvdata()) on another
interface triggering a NULL pointer exception.
Add a check for hid_get_drvdata() returning NULL, avoiding this
possible NULL pointer exception.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support") Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Fix the following issues with lenovo_led_set_tp10ubkbd() error handling:
1. On success hid_hw_raw_request() returns the number of bytes sent.
So we should check for (ret != 3) rather then for (ret != 0).
2. Actually propagate errors to the caller.
3. Since the LEDs are part of an USB keyboard-dock the mute LEDs can go
away at any time. Don't log an error when ret == -ENODEV and set the
LED_HW_PLUGGABLE flag to avoid errors getting logged when the USB gets
disconnected.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support") Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The lenovo_led_brightness_set function may sleep, so we should have the
the led_class_dev's brightness_set_blocking callback point to it, rather
then the regular brightness_set callback.
When toggled through sysfs this is not a problem, but the brightness_set
callback may be called from atomic context when using LED-triggers.
Fixes: bc04b37ea0ec ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support") Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
When the Intel IOMMU is operating in the scalable mode, some information
from the root and context table may be used to tag entries in the PASID
cache. Software should invalidate the PASID-cache when changing root or
context table entries.
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
The Address field of the Page Request Descriptor only keeps bit [63:12]
of the offending address. Convert it to a full address before reporting
it to device drivers.
projects / mirror_ubuntu-hirsute-kernel.git / log