The memory of doi_def->map.std pointing is allocated in
netlbl_cipsov4_add_std, but no place has freed it. It should be
freed in cipso_v4_doi_free which frees the cipso DOI resource.
Fixes: 96cb8e3313c7a ("[NetLabel]: CIPSOv4 and Unlabeled packet integration") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Mon, 7 Jun 2021 17:35:30 +0000 (11:35 -0600)]
neighbour: allow NUD_NOARP entries to be forced GCed
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8de ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8de (neighbor: Improve garbage collection) Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Mon, 7 Jun 2021 18:46:23 +0000 (21:46 +0300)]
revert "net: kcm: fix memory leak in kcm_sendmsg"
In commit c47cc304990a ("net: kcm: fix memory leak in kcm_sendmsg")
I misunderstood the root case of the memory leak and came up with
completely broken fix.
So, simply revert this commit to avoid GPF reported by
syzbot.
Im so sorry for this situation.
Fixes: c47cc304990a ("net: kcm: fix memory leak in kcm_sendmsg") Reported-by: syzbot+65badd5e74ec62cb67dc@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mykola Kostenok [Sun, 6 Jun 2021 08:24:32 +0000 (11:24 +0300)]
mlxsw: core: Set thermal zone polling delay argument to real value at init
Thermal polling delay argument for modules and gearboxes thermal zones
used to be initialized with zero value, while actual delay was used to
be set by mlxsw_thermal_set_mode() by thermal operation callback
set_mode(). After operations set_mode()/get_mode() have been removed by
cited commits, modules and gearboxes thermal zones always have polling
time set to zero and do not perform temperature monitoring.
Set non-zero "polling_delay" in thermal_zone_device_register() routine,
thus, the relevant thermal zones will perform thermal monitoring.
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Fixes: 5d7bd8aa7c35 ("thermal: Simplify or eliminate unnecessary set_mode() methods") Fixes: 1ee14820fd8e ("thermal: remove get_mode() operation of drivers") Signed-off-by: Mykola Kostenok <c_mykolak@nvidia.com> Acked-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sun, 6 Jun 2021 08:24:31 +0000 (11:24 +0300)]
mlxsw: spectrum_qdisc: Pass handle, not band number to find_class()
In mlxsw Qdisc offload, find_class() is an operation that yields a qdisc
offload descriptor given a parental qdisc descriptor and a class handle. In
__mlxsw_sp_qdisc_ets_graft() however, a band number is passed to that
function instead of a handle. This can lead to a trigger of a WARN_ON
with the following splat:
Since the parent handle is not passed with the offload information, compute
it from the band number and qdisc handle.
Fixes: 28052e618b04 ("mlxsw: spectrum_qdisc: Track children per qdisc") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Sun, 6 Jun 2021 08:24:30 +0000 (11:24 +0300)]
mlxsw: reg: Spectrum-3: Enforce lowest max-shaper burst size of 11
A max-shaper is the HW component responsible for delaying egress traffic
above a configured transmission rate. Burst size is the amount of traffic
that is allowed to pass without accounting. The burst size value needs to
be such that it can be expressed as 2^BS * 512 bits, where BS lies in a
certain ASIC-dependent range. mlxsw enforces that this holds before
attempting to configure the shaper.
The assumption for Spectrum-3 was that the lower limit of BS would be 5,
like for Spectrum-1. But as of now, the limit is still 11. Therefore fix
the driver accordingly, so that incorrect values are rejected early with a
proper message.
Fixes: 23effa2479ba ("mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: avoid link re-train during TC-MQPRIO configuration
When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.
Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.
Fix following hung_task_timeout_secs trace seen in these cases.
Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunjian Wang [Fri, 4 Jun 2021 11:03:18 +0000 (19:03 +0800)]
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
The commit ae81feb7338c ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.
Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.
The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.
Fixes: ae81feb7338c ("sch_htb: fix null pointer dereference on a null new_q") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Suggested-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 4 Jun 2021 21:25:14 +0000 (14:25 -0700)]
Merge branch 'wireguard-fixes'
Jason A. Donenfeld says:
====================
wireguard fixes for 5.13-rc5
Here are bug fixes to WireGuard for 5.13-rc5:
1-2,6) These are small, trivial tweaks to our test harness.
3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so
much different with -O2 either.
4) We were accidentally calling synchronize_rcu instead of
synchronize_net while holding the rtnl_lock, resulting in some rather
large stalls that hit production machines.
5) Peer allocation was wasting literally hundreds of megabytes on real
world deployments, due to oddly sized large objects not fitting
nicely into a kmalloc slab.
7-9) We move from an insanely expensive O(n) algorithm to a fast O(1)
algorithm, and cleanup a massive memory leak in the process, in
which allowed ips churn would leave danging nodes hanging around
without cleanup until the interface was removed. The O(1) algorithm
eliminates packet stalls and high latency issues, in addition to
bringing operations that took as much as 10 minutes down to less
than a second.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: allowedips: free empty intermediate nodes when removing single node
When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.
In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.
The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.
We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: allowedips: allocate nodes in kmem_cache
The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.
This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.
The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers. We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.
Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: allowedips: initialize list head in selftest
The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.
While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
With deployments having upwards of 600k peers now, this somewhat heavy
structure could benefit from more fine-grained allocations.
Specifically, instead of using a 2048-byte slab for a 1544-byte object,
we can now use 1544-byte objects directly, thus saving almost 25%
per-peer, or with 600k peers, that's a savings of 303 MiB. This also
makes wireguard's memory usage more transparent in tools like slabtop
and /proc/slabinfo.
Fixes: 8b5553ace83c ("wireguard: queueing: get rid of per-peer ring buffers") Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: use synchronize_net rather than synchronize_rcu
Many of the synchronization points are sometimes called under the rtnl
lock, which means we should use synchronize_net rather than
synchronize_rcu. Under the hood, this expands to using the expedited
flavor of function in the event that rtnl is held, in order to not stall
other concurrent changes.
This fixes some very, very long delays when removing multiple peers at
once, which would cause some operations to take several minutes.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Apparently, various versions of gcc have O3-related miscompiles. Looking
at the difference between -O2 and -O3 for gcc 11 doesn't indicate
miscompiles, but the difference also doesn't seem so significant for
performance that it's worth risking.
wireguard: selftests: make sure rp_filter is disabled on vethc
Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: selftests: remove old conntrack kconfig value
On recent kernels, this config symbol is no longer used.
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
virtchnl: Add missing padding to virtchnl_proto_hdrs
On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a374842 ("ice: Enable FDIR Configure for AVF") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Wed, 5 May 2021 21:17:59 +0000 (14:17 -0700)]
ice: Allow all LLDP packets from PF to Tx
Currently in the ice driver, the check whether to
allow a LLDP packet to egress the interface from the
PF_VSI is being based on the SKB's priority field.
It checks to see if the packets priority is equal to
TC_PRIO_CONTROL. Injected LLDP packets do not always
meet this condition.
SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL
(0x0003) and does not set the priority field. There will
be other injection methods (even ones used by end users)
that will not correctly configure the socket so that
SKB fields are correctly populated.
Then ethernet header has to have to correct value for
the protocol though.
Add a check to also allow packets whose ethhdr->h_proto
matches ETH_P_LLDP (0x88CC).
Fixes: 0c3a6101ff2d ("ice: Allow egress control packets from PF_VSI") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paul Greenwalt [Wed, 5 May 2021 21:17:58 +0000 (14:17 -0700)]
ice: report supported and advertised autoneg using PHY capabilities
Ethtool incorrectly reported supported and advertised auto-negotiation
settings for a backplane PHY image which did not support auto-negotiation.
This can occur when using media or PHY type for reporting ethtool
supported and advertised auto-negotiation settings.
Remove setting supported and advertised auto-negotiation settings based
on PHY type in ice_phy_type_to_ethtool(), and MAC type in
ice_get_link_ksettings().
Ethtool supported and advertised auto-negotiation settings should be
based on the PHY image using the AQ command get PHY capabilities with
media. Add setting supported and advertised auto-negotiation settings
based get PHY capabilities with media in ice_get_link_ksettings().
Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Haiyue Wang [Fri, 26 Feb 2021 21:19:31 +0000 (13:19 -0800)]
ice: handle the VF VSI rebuild failure
VSI rebuild can be failed for LAN queue config, then the VF's VSI will
be NULL, the VF reset should be stopped with the VF entering into the
disable state.
Fixes: 12bb018c538c ("ice: Refactor VF reset") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Fri, 26 Feb 2021 21:19:21 +0000 (13:19 -0800)]
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any
type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the
same time as VF_MBX_ARQLEN.
Fixes: 82ba01282cf8 ("ice: clear VF ARQLEN register on reset") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Fri, 26 Feb 2021 21:19:20 +0000 (13:19 -0800)]
ice: Fix allowing VF to request more/less queues via virtchnl
Commit 12bb018c538c ("ice: Refactor VF reset") caused a regression
that removes the ability for a VF to request a different amount of
queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to
either increase or decrease the number of queue pairs they are
allocated. Fix this by using the variable vf->num_req_qs when
determining the vf->num_vf_qs during VF VSI creation.
Fixes: 12bb018c538c ("ice: Refactor VF reset") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reported-by: Corentin Noël <corentin.noel@collabora.com> Tested-by: Corentin Noël <corentin.noel@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Jun 2021 22:21:58 +0000 (15:21 -0700)]
Merge tag 'ieee802154-for-davem-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
An update from ieee802154 for your *net* tree.
This time we have fixes for the ieee802154 netlink code, as well as a driver
fix. Zhen Lei, Wei Yongjun and Yang Li each had a patch to cleanup some return
code handling ensuring we actually get a real error code when things fails.
Dan Robertson fixed a potential null dereference in our netlink handling.
Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Coco Li [Thu, 3 Jun 2021 07:32:58 +0000 (07:32 +0000)]
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
Reported by syzbot:
HEAD commit: 90c911ad Merge tag 'fixes' of git://git.kernel.org/pub/scm..
git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7
compiler: Debian clang version 11.0.1-2
==================================================================
BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760
Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================
In the ip6_route_info_create function, in the case that the nh pointer
is not NULL, the fib6_nh in fib6_info has not been allocated.
Therefore, when trying to free fib6_info in this error case using
fib6_info_release, the function will call fib6_info_destroy_rcu,
which it will access fib6_nh_release(f6i->fib6_nh);
However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation
causing the reported memory issue above.
Therefore, releasing the empty pointer directly instead would be the solution.
Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec91916462 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by: Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: fix regression with HASH tc prio value update
commit db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion")
has moved searching for next highest priority HASH filter rule to
cxgb4_flow_rule_destroy(), which searches the rhashtable before the
the rule is removed from it and hence always finds at least 1 entry.
Fix by removing the rule from rhashtable first before calling
cxgb4_flow_rule_destroy() and hence avoid fetching stale info.
Fixes: db43b30cd89c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Jun 2021 22:05:07 +0000 (15:05 -0700)]
Merge branch 'caif-fixes'
Pavel Skripkin says:
====================
This patch series fix 2 memory leaks in caif
interface.
Syzbot reported memory leak in cfserl_create().
The problem was in cfcnfg_add_phy_layer() function.
This function accepts struct cflayer *link_support and
assign it to corresponting structures, but it can fail
in some cases.
These cases must be handled to prevent leaking allocated
struct cflayer *link_support pointer, because if error accured
before assigning link_support pointer to somewhere, this pointer
must be freed.
Fail log:
[ 49.051872][ T7010] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6)
[ 49.110236][ T7042] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6)
[ 49.134936][ T7045] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6)
[ 49.163083][ T7043] caif:cfcnfg_add_phy_layer(): Too many CAIF Link Layers (max 6)
[ 55.248950][ T6994] kmemleak: 4 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
int cfcnfg_add_phy_layer(..., struct cflayer *link_support, ...)
{
...
/* CAIF protocol allow maximum 6 link-layers */
for (i = 0; i < 7; i++) {
phyid = (dev->ifindex + i) & 0x7;
if (phyid == 0)
continue;
if (cfcnfg_get_phyinfo_rcu(cnfg, phyid) == NULL)
goto got_phyid;
}
pr_warn("Too many CAIF Link Layers (max 6)\n");
goto out;
...
if (link_support != NULL) {
link_support->id = phyid;
layer_set_dn(frml, link_support);
layer_set_up(link_support, frml);
layer_set_dn(link_support, phy_layer);
layer_set_up(phy_layer, link_support);
}
...
}
As you can see, if cfcnfg_add_phy_layer fails before layer_set_*,
link_support becomes leaked.
So, in this series, I made cfcnfg_add_phy_layer()
return an int and added error handling code to prevent
leaking link_support pointer in caif_device_notify()
and cfusbl_device_notify() functions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Thu, 3 Jun 2021 16:39:35 +0000 (19:39 +0300)]
net: caif: fix memory leak in cfusbl_device_notify
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error.
Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Thu, 3 Jun 2021 16:39:11 +0000 (19:39 +0300)]
net: caif: fix memory leak in caif_device_notify
In case of caif_enroll_dev() fail, allocated
link_support won't be assigned to the corresponding
structure. So simply free allocated pointer in case
of error
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+7ec324747ce876a29db6@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Thu, 3 Jun 2021 16:38:51 +0000 (19:38 +0300)]
net: caif: add proper error handling
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Jun 2021 22:02:55 +0000 (15:02 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
This series contains updates to igb, igc, ixgbe, ixgbevf, i40e and ice
drivers.
Kurt Kanzenbach fixes XDP for igb when PTP is enabled by pulling the
timestamp and adjusting appropriate values prior to XDP operations.
Magnus adds missing exception tracing for XDP on igb, igc, ixgbe,
ixgbevf, i40e and ice drivers.
Maciej adds tracking of AF_XDP zero copy enabled queues to resolve an
issue with copy mode Tx for the ice driver.
Note: Patch 7 will conflict when merged with net-next. Please carry
these changes forward. IGC_XDP_TX and IGC_XDP_REDIRECT will need to be
changed to return to conform with the net-next changes. Let me know if
you have issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The following pull-request contains BPF updates for your *net* tree.
We've added 2 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 19 insertions(+), 24 deletions(-).
The main changes are:
1) Fix pahole BTF generation when ccache is used, from Javier Martinez Canillas.
2) Fix BPF lockdown hooks in bpf_probe_read_kernel{,_str}() helpers which caused
a deadlock from bcc programs, triggered OOM killer from audit side and didn't
work generally with SELinux policy rules due to pointing to wrong task struct,
from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-and-tested-by: syzbot+b039f5699bd82e1fb011@syzkaller.appspotmail.com Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Cc: stable@vger.kernel.org Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bluetooth: btusb: Fix failing to init controllers with operation firmware
Some firmware when operation don't may have broken versions leading to
error like the following:
[ 6.176482] Bluetooth: hci0: Firmware revision 0.0 build 121 week 7 2021
[ 6.177906] bluetooth hci0: Direct firmware load for intel/ibt-20-0-0.sfi failed with error -2
[ 6.177910] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-20-0-0.sfi (-2)
Since we load the firmware file just to check if its version had changed
comparing to the one already loaded we can just skip since the firmware
is already operation.
Fixes: ac0565462e330 ("Bluetooth: btintel: Check firmware version before
download") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Marcel Holtmann [Thu, 3 Jun 2021 19:20:26 +0000 (21:20 +0200)]
Bluetooth: Fix VIRTIO_ID_BT assigned number
It turned out that the VIRTIO_ID_* are not assigned in the virtio_ids.h
file in the upstream kernel. Picking the next free one was wrong and
there is a process that has been followed now.
See https://github.com/oasis-tcs/virtio-spec/issues/108 for details.
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure")
silently introduced a regression and broke the Tx side of AF_XDP in copy
mode. xsk_pool on ice_ring is set only based on the existence of the XDP
prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed.
That is not something that should happen for copy mode as it should use
the regular data path ice_clean_tx_irq.
This results in a following splat when xdpsock is run in txonly or l2fwd
scenarios in copy mode:
Fix this by introducing the bitmap of queues that are zero-copy enabled,
where each bit, corresponding to a queue id that xsk pool is being
configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and
checked within ice_xsk_pool(). The latter is a function used for
deciding which napi poll routine is executed.
Idea is being taken from our other drivers such as i40e and ixgbe.
Fixes: c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 10 May 2021 09:38:54 +0000 (11:38 +0200)]
igc: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: 73f1071c1d29 ("igc: Add support for XDP_TX action") Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 10 May 2021 09:38:53 +0000 (11:38 +0200)]
ixgbevf: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 10 May 2021 09:38:52 +0000 (11:38 +0200)]
igb: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Magnus Karlsson [Mon, 10 May 2021 09:38:51 +0000 (11:38 +0200)]
ixgbe: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 10 May 2021 09:38:50 +0000 (11:38 +0200)]
ice: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: efc2214b6047 ("ice: Add support for XDP") Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Magnus Karlsson [Mon, 10 May 2021 09:38:49 +0000 (11:38 +0200)]
i40e: add correct exception tracing for XDP
Add missing exception tracing to XDP when a number of different errors
can occur. The support was only partial. Several errors where not
logged which would confuse the user quite a lot not knowing where and
why the packets disappeared.
Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Kurt Kanzenbach [Mon, 3 May 2021 07:28:00 +0000 (09:28 +0200)]
igb: Fix XDP with PTP enabled
When using native XDP with the igb driver, the XDP frame data doesn't point to
the beginning of the packet. It's off by 16 bytes. Everything works as expected
with XDP skb mode.
Actually these 16 bytes are used to store the packet timestamps. Therefore, pull
the timestamp before executing any XDP operations and adjust all other code
accordingly. The igc driver does it like that as well.
Andy Shevchenko [Mon, 31 May 2021 13:22:26 +0000 (16:22 +0300)]
net: ieee802154: mrf24j40: Drop unneeded of_match_ptr()
Driver can be used in different environments and moreover, when compiled
with !OF, the compiler may issue a warning due to unused mrf24j40_of_match
variable. Hence drop unneeded of_match_ptr() call.
While at it, update headers block to reflect above changes.
Yang Li [Sun, 25 Apr 2021 10:24:59 +0000 (18:24 +0800)]
net/ieee802154: drop unneeded assignment in llsec_iter_devkeys()
In order to keep the code style consistency of the whole file,
redundant return value ‘rc’ and its assignments should be deleted
The clang_analyzer complains as follows:
net/ieee802154/nl-mac.c:1203:12: warning: Although the value stored to
'rc' is used in the enclosing expression, the value is never actually
read from 'rc'
Wong Vee Khee [Wed, 2 Jun 2021 02:31:25 +0000 (10:31 +0800)]
net: stmmac: fix issue where clk is being unprepared twice
In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.
The second call in intel_eth_pci_probe() will caused the following:-
Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Josh Triplett [Wed, 2 Jun 2021 01:38:41 +0000 (18:38 -0700)]
net: ipconfig: Don't override command-line hostnames or domains
If the user specifies a hostname or domain name as part of the ip=
command-line option, preserve it and don't overwrite it with one
supplied by DHCP/BOOTP.
For instance, ip=::::myhostname::dhcp will use "myhostname" rather than
ignoring and overwriting it.
Fix the comment on ic_bootp_string that suggests it only copies a string
"if not already set"; it doesn't have any such logic.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown")
added an implementation of the locked_down LSM hook to SELinux, with the aim
to restrict which domains are allowed to perform operations that would breach
lockdown. This is indirectly also getting audit subsystem involved to report
events. The latter is problematic, as reported by Ondrej and Serhei, since it
can bring down the whole system via audit:
1) The audit events that are triggered due to calls to security_locked_down()
can OOM kill a machine, see below details [0].
2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit()
when trying to wake up kauditd, for example, when using trace_sched_switch()
tracepoint, see details in [1]. Triggering this was not via some hypothetical
corner case, but with existing tools like runqlat & runqslower from bcc, for
example, which make use of this tracepoint. Rough call sequence goes like:
What's worse is that the intention of 59438b46471a to further restrict lockdown
settings for specific applications in respect to the global lockdown policy is
completely broken for BPF. The SELinux policy rule for the current lockdown check
looks something like this:
allow <who> <who> : lockdown { <reason> };
However, this doesn't match with the 'current' task where the security_locked_down()
is executed, example: httpd does a syscall. There is a tracing program attached
to the syscall which triggers a BPF program to run, which ends up doing a
bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does
the permission check against 'current', that is, httpd in this example. httpd
has literally zero relation to this tracing program, and it would be nonsensical
having to write an SELinux policy rule against httpd to let the tracing helper
pass. The policy in this case needs to be against the entity that is installing
the BPF program. For example, if bpftrace would generate a histogram of syscall
counts by user space application:
bpftrace would then go and generate a BPF program from this internally. One way
of doing it [for the sake of the example] could be to call bpf_get_current_task()
helper and then access current->comm via one of bpf_probe_read_kernel{,_str}()
helpers. So the program itself has nothing to do with httpd or any other random
app doing a syscall here. The BPF program _explicitly initiated_ the lockdown
check. The allow/deny policy belongs in the context of bpftrace: meaning, you
want to grant bpftrace access to use these helpers, but other tracers on the
system like my_random_tracer _not_.
Therefore fix all three issues at the same time by taking a completely different
approach for the security_locked_down() hook, that is, move the check into the
program verification phase where we actually retrieve the BPF func proto. This
also reliably gets the task (current) that is trying to install the BPF tracing
program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since
we're moving this out of the BPF helper's fast-path which can be called several
millions of times per second.
The check is then also in line with other security_locked_down() hooks in the
system where the enforcement is performed at open/load time, for example,
open_kcore() for /proc/kcore access or module_sig_check() for module signatures
just to pick few random ones. What's out of scope in the fix as well as in
other security_locked_down() hook locations /outside/ of BPF subsystem is that
if the lockdown policy changes on the fly there is no retrospective action.
This requires a different discussion, potentially complex infrastructure, and
it's also not clear whether this can be solved generically. Either way, it is
out of scope for a suitable stable fix which this one is targeting. Note that
the breakage is specifically on 59438b46471a where it started to rely on 'current'
as UAPI behavior, and _not_ earlier infrastructure such as 9d1f8be5cf42 ("bpf:
Restrict bpf when kernel lockdown is in confidentiality mode").
[0] https://bugzilla.redhat.com/show_bug.cgi?id=1955585, Jakub Hrozek says:
I starting seeing this with F-34. When I run a container that is traced with
BPF to record the syscalls it is doing, auditd is flooded with messages like:
type=AVC msg=audit(1619784520.593:282387): avc: denied { confidentiality }
for pid=476 comm="auditd" lockdown_reason="use of bpf to read kernel RAM"
scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:system_r:auditd_t:s0
tclass=lockdown permissive=0
This seems to be leading to auditd running out of space in the backlog buffer
and eventually OOMs the machine.
Upstream kernel 5.11.0-rc7 and later was found to deadlock during a
bpf_probe_read_compat() call within a sched_switch tracepoint. The problem
is reproducible with the reg_alloc3 testcase from SystemTap's BPF backend
testsuite on x86_64 as well as the runqlat, runqslower tools from bcc on
ppc64le. Example stack trace:
netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches
The private helper data size cannot be updated. However, updates that
contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is
the same.
Add the ct helper extension only for unconfirmed conntrack. Skip rule
evaluation if the ct helper extension does not exist. Thus, you can
only create expectations from the first packet.
It should be possible to remove this limitation by adding a new action
to attach a generic ct helper to the first packet. Then, use this ct
helper extension from follow up packets to create the ct expectation.
While at it, add a missing check to skip the template conntrack too
and remove check for IPCT_UNTRACK which is implicit to !ct.
net/mlx5: DR, Create multi-destination flow table with level less than 64
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Aya Levin [Mon, 3 May 2021 13:59:55 +0000 (16:59 +0300)]
net/mlx5e: Fix HW TS with CQE compression according to profile
When the driver's profile doesn't support a dedicated PTP-RQ, the PTP
accuracy of HW TS is affected by the CQE compression. In this case,
turn off CQE compression. Otherwise, the driver crashes:
Roi Dayan [Wed, 19 May 2021 07:00:27 +0000 (10:00 +0300)]
net/mlx5e: Fix adding encap rules to slow path
On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.
Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5: Check firmware sync reset requested is set before trying to abort it
In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.
Roi Dayan [Thu, 29 Apr 2021 09:13:35 +0000 (12:13 +0300)]
net/mlx5e: Disable TLS offload for uplink representor
TLS offload is not supported in switchdev mode.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Aya Levin [Tue, 25 May 2021 12:35:25 +0000 (15:35 +0300)]
net/mlx5e: Fix incompatible casting
Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.
Fixes: 4bd9d5070b92 ("net/mlx5e: Enforce setting of a single FEC mode") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
David S. Miller [Tue, 1 Jun 2021 22:58:05 +0000 (15:58 -0700)]
Merge branch 'ktls-use-after-free'
Maxim Mikityanskiy says:
====================
Fix use-after-free after the TLS device goes down and up
This small series fixes a use-after-free bug in the TLS offload code.
The first patch is a preparation for the second one, and the second is
the fix itself.
net/tls: Fix use-after-free after the TLS device goes down and up
When a netdev with active TLS offload goes down, tls_device_down is
called to stop the offload and tear down the TLS context. However, the
socket stays alive, and it still points to the TLS context, which is now
deallocated. If a netdev goes up, while the connection is still active,
and the data flow resumes after a number of TCP retransmissions, it will
lead to a use-after-free of the TLS context.
This commit addresses this bug by keeping the context alive until its
normal destruction, and implements the necessary fallbacks, so that the
connection can resume in software (non-offloaded) kTLS mode.
On the TX side tls_sw_fallback is used to encrypt all packets. The RX
side already has all the necessary fallbacks, because receiving
non-decrypted packets is supported. The thing needed on the RX side is
to block resync requests, which are normally produced after receiving
non-decrypted packets.
The necessary synchronization is implemented for a graceful teardown:
first the fallbacks are deployed, then the driver resources are released
(it used to be possible to have a tls_dev_resync after tls_dev_del).
A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback
mode. It's used to skip the RX resync logic completely, as it becomes
useless, and some objects may be released (for example, resync_async,
which is allocated and freed by the driver).
Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
RCU synchronization is guaranteed to finish in finite time, unlike a
busy loop that polls a flag. This patch is a preparation for the bugfix
in the next patch, where the same synchronize_net() call will also be
used to sync with the TX datapath.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xuan Zhuo [Tue, 1 Jun 2021 06:40:00 +0000 (14:40 +0800)]
virtio_net: get build_skb() buf by data ptr
In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, we should get buf based on
headroom instead of offset.
This patch solves this problem. But if you don't use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xuan Zhuo [Tue, 1 Jun 2021 06:39:59 +0000 (14:39 +0800)]
virtio-net: fix for unable to handle page fault for address
In merge mode, when xdp is enabled, if the headroom of buf is smaller
than virtnet_get_headroom(), xdp_linearize_page() will be called but the
variable of "headroom" is still 0, which leads to wrong logic after
entering page_to_skb().
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Mon, 31 May 2021 21:00:30 +0000 (17:00 -0400)]
net: sock: fix in-kernel mark setting
This patch fixes the in-kernel mark setting by doing an additional
sk_dst_reset() which was introduced by commit 50254256f382 ("sock: Reset
dst when changing sk_mark via setsockopt"). The code is now shared to
avoid any further suprises when changing the socket mark value.
Fixes: 84d1c617402e ("net: sock: add sock_set_mark") Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For example, when ds->index == 0, port == 3 and subvlan == 1,
dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for
subvlan == 0, but it should have returned 1043.
This is because the low portion of the subvlan bits are not masked
properly when writing into the 12-bit VLAN value. They are masked into
bits 4:3, but they should be masked into bits 5:4.
Fixes: 3eaae1d05f2b ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect
It's possible to trigger NULL pointer dereference by local unprivileged
user, when calling getsockname() after failed bind() (e.g. the bind
fails because LLCP_SAP_MAX used as SAP):
Lin Ma [Sun, 30 May 2021 13:37:43 +0000 (21:37 +0800)]
Bluetooth: use correct lock to prevent UAF of hdev object
The hci_sock_dev_event() function will cleanup the hdev object for
sockets even if this object may still be in used within the
hci_sock_bound_ioctl() function, result in UAF vulnerability.
This patch replace the BH context lock to serialize these affairs
and prevent the race condition.
Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fixes: e5e5b771f684 ("net: stmmac: make in-band AN mode parsing is supported for non-DT") Signed-off-by: Sriranjani P <sriranjani.p@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Sat, 15 May 2021 13:26:12 +0000 (15:26 +0200)]
mt76: mt7615: do not set MT76_STATE_PM at bootstrap
Remove MT76_STATE_PM in mt7615_init_device() and introduce
__mt7663s_mcu_drv_pmctrl for fw loading in mt7663s.
This patch fixes a crash at bootstrap for device (e.g. mt7622) that do
not support runtime-pm
Jakub Kicinski [Fri, 28 May 2021 20:51:43 +0000 (13:51 -0700)]
Merge branch 'mptcp-fixes-for-5-13'
Mat Martineau says:
====================
mptcp: Fixes for 5.13
These patches address two issues in MPTCP.
Patch 1 fixes a locking issue affecting MPTCP-level retransmissions.
Patches 2-4 improve handling of out-of-order packet arrival early
in a connection, so it falls back to TCP rather than forcing a
reset. Includes a selftest.
====================
Paolo Abeni [Thu, 27 May 2021 23:31:40 +0000 (16:31 -0700)]
mptcp: update selftest for fallback due to OoO
The previous commit noted that we can have fallback
scenario due to OoO (or packet drop). Update the self-tests
accordingly
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Thu, 27 May 2021 23:31:39 +0000 (16:31 -0700)]
mptcp: do not reset MP_CAPABLE subflow on mapping errors
When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192 Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Thu, 27 May 2021 23:31:38 +0000 (16:31 -0700)]
mptcp: always parse mptcp options for MPC reqsk
In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.
If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.
The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix incorrect sockopts unregistration from error path,
from Florian Westphal.
2) A few patches to provide better error reporting when missing kernel
netfilter options are missing in .config.
3) Fix dormant table flag updates.
4) Memleak in IPVS when adding service with IP_VS_SVC_F_HASHED flag.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
netfilter: nf_tables: fix table flag updates
netfilter: nf_tables: extended netlink error reporting for chain type
netfilter: nf_tables: missing error reporting for not selected expressions
netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================
Ariel Levkovich [Wed, 26 May 2021 17:01:10 +0000 (20:01 +0300)]
net/sched: act_ct: Fix ct template allocation for zone 0
Fix current behavior of skipping template allocation in case the
ct action is in zone 0.
Skipping the allocation may cause the datapath ct code to ignore the
entire ct action with all its attributes (commit, nat) in case the ct
action in zone 0 was preceded by a ct clear action.
The ct clear action sets the ct_state to untracked and resets the
skb->_nfct pointer. Under these conditions and without an allocated
ct template, the skb->_nfct pointer will remain NULL which will
cause the tc ct action handler to exit without handling commit and nat
actions, if such exist.
For example, the following rule in OVS dp:
recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \
in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \
recirc(0x37a)
Will result in act_ct skipping the commit and nat actions in zone 0.
The change removes the skipping of template allocation for zone 0 and
treats it the same as any other zone.
Paul Blakey [Wed, 26 May 2021 11:44:09 +0000 (14:44 +0300)]
net/sched: act_ct: Offload connections with commit action
Currently established connections are not offloaded if the filter has a
"ct commit" action. This behavior will not offload connections of the
following scenario:
Parav Pandit [Wed, 26 May 2021 20:00:27 +0000 (23:00 +0300)]
devlink: Correct VIRTUAL port to not have phys_port attributes
Physical port name, port number attributes do not belong to virtual port
flavour. When VF or SF virtual ports are registered they incorrectly
append "np0" string in the netdevice name of the VF/SF.
Before this fix, VF netdevice name were ens2f0np0v0, ens2f0np0v1 for VF
0 and 1 respectively.
After the fix, they are ens2f0v0, ens2f0v1.
With this fix, reading /sys/class/net/ens2f0v0/phys_port_name returns
-EOPNOTSUPP.
Also devlink port show example for 2 VFs on one PF to ensure that any
physical port attributes are not exposed.
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
pci/0000:06:00.3/196608: type eth netdev ens2f0v0 flavour virtual splittable false
pci/0000:06:00.4/262144: type eth netdev ens2f0v1 flavour virtual splittable false
This change introduces a netdevice name change on systemd/udev
version 245 and higher which honors phys_port_name sysfs file for
generation of netdevice name.
This also aligns to phys_port_name usage which is limited to switchdev
ports as described in [1].
projects / mirror_ubuntu-kernels.git / log