This patch makes sure we always allocate requests in the core blk-mq
code and use a common prepare_request method to initialize them for
both mq I/O schedulers. For Kyber and additional limit_depth method
is added that is called before allocating the request.
Also because none of the intializations can really fail the new method
does not return an error - instead the bfq finish method is hardened
to deal with the no-IOC case.
Last but not least this removes the abuse of RQF_QUEUE by the blk-mq
scheduling code as RQF_ELFPRIV is all that is needed now.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_sched_assign_ioc now only handles the assigned of the ioc if
the schedule needs it (bfq only at the moment). The caller to the
per-request initializer is moved out so that it can be merged with
a similar call for the kyber I/O scheduler.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
NeilBrown [Fri, 16 Jun 2017 05:02:09 +0000 (15:02 +1000)]
loop: Add PF_LESS_THROTTLE to block/loop device thread.
When a filesystem is mounted from a loop device, writes are
throttled by balance_dirty_pages() twice: once when writing
to the filesystem and once when the loop_handle_cmd() writes
to the backing file. This double-throttling can trigger
positive feedback loops that create significant delays. The
throttling at the lower level is seen by the upper level as
a slow device, so it throttles extra hard.
The PF_LESS_THROTTLE flag was created to handle exactly this
circumstance, though with an NFS filesystem mounted from a
local NFS server. It reduces the throttling on the lower
layer so that it can proceed largely unthrottled.
To demonstrate this, create a filesystem on a loop device
and write (e.g. with dd) several large files which combine
to consume significantly more than the limit set by
/proc/sys/vm/dirty_ratio or dirty_bytes. Measure the total
time taken.
When I do this directly on a device (no loop device) the
total time for several runs (mkfs, mount, write 200 files,
umount) is fairly stable: 28-35 seconds.
When I do this over a loop device the times are much worse
and less stable. 52-460 seconds. Half below 100seconds,
half above.
When I apply this patch, the times become stable again,
though not as fast as the no-loop-back case: 53-72 seconds.
There may be room for further improvement as the total overhead still
seems too high, but this is a big improvement.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Jens Axboe [Fri, 16 Jun 2017 16:14:59 +0000 (10:14 -0600)]
Merge branch 'nvme-4.13' of git://git.infradead.org/nvme into for-4.13/block
Pull NVMe changes for 4.13 from Christoph:
Highlights:
- UUID identifier support from Johannes
- Lots of cleanups from Sagi
- Host Memory Buffer support from me
And lots of cleanups and smaller fixes of course.
Note that the UUID identifier changes are based on top of the uuid tree.
I am the maintainer of that tree and will send it to Linus as soon as
4.12 is released as various other trees depend on it as well (and the
diffstat includes those changes unfortunately)
Arvind Yadav [Fri, 16 Jun 2017 09:54:39 +0000 (15:24 +0530)]
block: swim3: make of_device_ids const.
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8908 1096 624 10628 2984 drivers/block/swim3.o
File size after constify swim3_match:
text data bss dec hex filename
9708 296 624 10628 2984 drivers/block/swim3.o
Bart Van Assche [Tue, 13 Jun 2017 15:07:33 +0000 (08:07 -0700)]
block: Dedicated error code fixups
This patch fixes two sparse warnings introduced by the "dedicated
error codes for the block layer V3" patch series. These changes
have not been tested.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
Scott Bauer [Thu, 15 Jun 2017 16:44:30 +0000 (10:44 -0600)]
nvme: implement NS Optimal IO Boundary from 1.3 Spec
The NVMe 1.3 spec introduces Namespace Optimal IO Boundaries (NOIOB),
which standardizes the stripe mechanism we currently have quirks for.
This patch implements the necessary logic to handle this new feature.
Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme: move reset workqueue handling to common code
This moves the nvme_reset function from the PCIe driver to common code,
renaming it to nvme_reset_ctrl in the process. Additionally a new
helper nvme_reset_ctrl_sync is added for the case where we want to
wait for the reset. To facilitate that the reset_work work structure is
move to the common nvme_ctrl structure and the ->reset_ctrl method is
removed. For now the drivers initialize the reset_work with their own
callback, but longer term we should move to callouts for specific
parts of the reset process and move even more code to the core.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
nvme: move protection information check into nvme_setup_rw
It only applies to read/write commands, and this way non-PCIe drivers
get the check as well instead of having to duplicate it when adding
metadata support.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Dan Carpenter [Wed, 14 Jun 2017 10:46:45 +0000 (13:46 +0300)]
nvme-rdma: fix error code in nvme_rdma_create_ctrl()
We accidentally return ERR_PTR(0) which is NULL. The caller isn't
explicitly checking for that but I couldn't immediately spot whether
this would lead to a NULL dereference. Anyway, we can fix add an
error code easily enough.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Guan Junxiong [Tue, 13 Jun 2017 02:51:24 +0000 (10:51 +0800)]
nvmf: keep track of nvmet connect error status
To let the host know what happends to the connection establishment,
adjust the behavior of nvmf_log_connect_error to make more connect
specifig error codes human-readble.
Bart Van Assche [Thu, 8 Jun 2017 16:43:29 +0000 (09:43 -0700)]
nvmet-fc: Remove a set-but-not-used variable
This was detected by building the nvmet-fc driver with W=1.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: James Smart <james.smart@broadcom.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow overriding the announced NVMe Version of a via configfs.
This is particularly helpful when debugging new features for the host
or target side without bumping the hard coded version (as the target
might not be fully compliant to the announced version yet).
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet: add uuid field to nvme_ns and populate via configfs
Add the UUID field from the NVMe Namespace Identification Descriptor
to the nvmet_ns structure and allow it's population via configfs.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet: implement namespace identify descriptor list
A NVMe Identify NS command with a CNS value of '3' is expecting a list
of Namespace Identification Descriptor structures to be returned to
the host for the namespace requested in the namespace identify
command.
This Namespace Identification Descriptor structure consists of the
type of the namespace identifier, the length of the identifier and the
actual identifier.
Valid types are NGUID and UUID which we have saved in our nvme_ns
structure if they have been configured via configfs. If no value has
been assigened to one of these we return an "invalid opcode" back to
the host to maintain backward compatibiliy with older implementations
without Namespace Identify Descriptor list support.
Also as the Namespace Identify Descriptor list is the only mandatory
feature change between 1.2.1 and 1.3 we can bump the advertised
version as well.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that we have a way for getting the UUID from a target, provide it
to userspace as well.
Unfortunately there is already a sysfs attribute called UUID which is
a misnomer as it holds the NGUID value. So instead of creating yet
another wrong name, create a new 'nguid' sysfs attribute for the
NGUID. For the UUID attribute add a check wheter the namespace has a
UUID assigned to it and return this or return the NGUID to maintain
backwards compatibility. This should give userspace a chance to catch
up.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
If a target identifies itself as NVMe 1.3 compliant, try to get the
list of Namespace Identification Descriptors and populate the UUID,
NGUID and EUI64 fileds in the NVMe namespace structure with these
values.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
The uuid field in the nvme_ns structure represents the nguid field
from the identify namespace command. And as NVMe 1.3 introduced an
UUID in the NVMe Namespace Identification Descriptor this will
collide.
So rename the uuid to nguid to prevent any further
confusion. Unfortunately we export the nguid to sysfs in the uuid
sysfs attribute, but this can't be changed anymore without possibly
breaking existing userspace.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic
4096 value.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: converted three more users] Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Wed, 7 Jun 2017 18:32:50 +0000 (20:32 +0200)]
nvme-pci: Remove watchdog timer
The controller status polling was added to preemptively reset a failed
controller. This early detection would allow commands that would normally
timeout a chance for a retry, or find broken links when the platform
didn't support hotplug.
This once-per-second MMIO read, however, created more problems than
it solves. This often races with PCIe Hotplug events that required
complicated syncing between work queues, frequently triggered PCIe
Completion Timeout errors that also lead to fatal machine checks, and
unnecessarily disrupts low power modes by running on idle controllers.
This patch removes the watchdog timer, and instead checks controller
health only on an IO timeout when we have a reason to believe something
is wrong. If the controller is failed, the driver will disable immediately
and request scheduling a reset.
Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Xu Yu [Wed, 24 May 2017 08:39:55 +0000 (16:39 +0800)]
nvme-pci: remap BAR0 to cover admin CQ doorbell for large stride
The existing driver initially maps 8192 bytes of BAR0 which is
intended to cover doorbells of admin SQ and CQ. However, if a
large stride, e.g. 10, is used, the doorbell of admin CQ will
be out of 8192 bytes. Consequently, a page fault will be raised
when the admin CQ doorbell is accessed in nvme_configure_admin_queue().
This patch fixes this issue by remapping BAR0 before accessing
admin CQ doorbell if the initial mapping is not enough.
Sagi Grimberg [Thu, 4 May 2017 10:33:12 +0000 (13:33 +0300)]
nvme: Don't allow to reset a reconnecting controller
The reset operation is guaranteed to fail for all scenarios
but the esoteric case where in the last reconnect attempt
concurrent with the reset we happen to successfully reconnect.
We just deny initiating a reset if we are reconnecting.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead of introducing a flag for if the queue is allocated,
simply free the rdma resources when we get the error.
We allocate the queue rdma resources when we have an address
resolution, their we allocate (or take a reference on) our device
so we should free it when we have error after the address resolution
namely:
1. route resolution error
2. connect reject
3. connect error
4. peer unreachable error
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
If a controller supports the host memory buffer we try to provide
it with the requested size up to an upper cap set as a module
parameter. We try to give as few as possible descriptors, eventually
working our way down.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Arnav Dawn [Fri, 12 May 2017 15:12:03 +0000 (17:12 +0200)]
nvme.h: add dword 12 - 15 fields to struct nvme_features
Signed-off-by: Arnav Dawn <a.dawn@samsung.com>
[hch: split from a larger patch, new changelog] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
The merge of 4.12-rc5 into the for-4.13/block tree didn't handle the queue
ready case correctly. Fix this by propagating blk_status_t into
nvme_rdma_queue_is_ready.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Sun, 11 Jun 2017 23:17:29 +0000 (16:17 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull key subsystem fixes from James Morris:
"Here are a bunch of fixes for Linux keyrings, including:
- Fix up the refcount handling now that key structs use the
refcount_t type and the refcount_t ops don't allow a 0->1
transition.
- Fix a potential NULL deref after error in x509_cert_parse().
- Don't put data for the crypto algorithms to use on the stack.
- Fix the handling of a null payload being passed to add_key().
- Fix incorrect cleanup an uninitialised key_preparsed_payload in
key_update().
- Explicit sanitisation of potentially secure data before freeing.
- Fixes for the Diffie-Helman code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
KEYS: fix refcount_inc() on zero
KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
crypto : asymmetric_keys : verify_pefile:zero memory content before freeing
KEYS: DH: add __user annotations to keyctl_kdf_params
KEYS: DH: ensure the KDF counter is properly aligned
KEYS: DH: don't feed uninitialized "otherinfo" into KDF
KEYS: DH: forbid using digest_null as the KDF hash
KEYS: sanitize key structs before freeing
KEYS: trusted: sanitize all key material
KEYS: encrypted: sanitize all key material
KEYS: user_defined: sanitize key payloads
KEYS: sanitize add_key() and keyctl() key payloads
KEYS: fix freeing uninitialized memory in key_update()
KEYS: fix dereferencing NULL payload with nonzero length
KEYS: encrypted: use constant-time HMAC comparison
KEYS: encrypted: fix race causing incorrect HMAC calculations
KEYS: encrypted: fix buffer overread in valid_master_desc()
KEYS: encrypted: avoid encrypting/decrypting stack buffers
KEYS: put keyring if install_session_keyring_to_cred() fails
KEYS: Delete an error message for a failed memory allocation in get_derived_key()
...
Linus Torvalds [Sun, 11 Jun 2017 22:51:56 +0000 (15:51 -0700)]
compiler, clang: properly override 'inline' for clang
Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused
static inline functions") just caused more warnings due to re-defining
the 'inline' macro.
So undef it before re-defining it, and also add the 'notrace' attribute
like the gcc version that this is overriding does.
Linus Torvalds [Sun, 11 Jun 2017 19:02:01 +0000 (12:02 -0700)]
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull randomness fixes from Ted Ts'o:
"Improve performance by using a lockless update mechanism suggested by
Linus, and make sure we refresh per-CPU entropy returned get_random_*
as soon as the CRNG is initialized"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: invalidate batched entropy after crng init
random: use lockless method of accessing and updating f->reg_idx
Linus Torvalds [Sun, 11 Jun 2017 18:57:47 +0000 (11:57 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix various bug fixes in ext4 caused by races and memory allocation
failures"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fdatasync(2) after extent manipulation operations
ext4: fix data corruption for mmap writes
ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO
ext4: fix quota charging for shared xattr blocks
ext4: remove redundant check for encrypted file on dio write path
ext4: remove unused d_name argument from ext4_search_dir() et al.
ext4: fix off-by-one error when writing back pages before dio read
ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
ext4: keep existing extra fields when inode expands
ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors
ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff()
ext4: fix SEEK_HOLE
jbd2: preserve original nofs flag during journal restart
ext4: clear lockdep subtype for quota files on quota off
Linus Torvalds [Sun, 11 Jun 2017 18:34:27 +0000 (11:34 -0700)]
Merge tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A few overdue GPIO patches for the v4.12 kernel.
- Fix debounce logic on the Aspeed platform.
- Fix the "virtual gpio" things on the Intel Crystal Cove.
- Fix the blink counter selection on the MVEBU platform"
* tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mvebu: fix gpio bank registration when pwm is used
gpio: mvebu: fix blink counter register selection
MAINTAINERS: remove self from GPIO maintainers
gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs
gpio: aspeed: Don't attempt to debounce if disabled
Linus Torvalds [Sun, 11 Jun 2017 18:29:15 +0000 (11:29 -0700)]
Merge tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 4.12-rc5. Nothing major here,
just some small bugfixes found by people testing, and a MAINTAINERS
file update for the genwqe driver.
All have been in linux-next with no reported issues"
[ The cxl driver fix came in through the powerpc tree earlier ]
* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
cxl: Avoid double free_irq() for psl,slice interrupts
mei: make sysfs modalias format similar as uevent modalias
drivers: char: mem: Fix wraparound check to allow mappings up to the end
MAINTAINERS: Change maintainer of genwqe driver
goldfish_pipe: use GFP_ATOMIC under spin lock
firmware: vpd: do not leak kobjects
firmware: vpd: avoid potential use-after-free when destroying section
firmware: vpd: do not leave freed section attributes to the list
Linus Torvalds [Sun, 11 Jun 2017 18:25:51 +0000 (11:25 -0700)]
Merge tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"These are mostly all IIO driver fixes, resolving a number of tiny
issues. There's also a ccree and lustre fix in here as well, both fix
problems found in those codebases.
All have been in linux-next with no reported issues"
* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: ccree: fix buffer copy
staging/lustre/lov: remove set_fs() call from lov_getstripe()
staging: ccree: add CRYPTO dependency
iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
iio: light: ltr501 Fix interchanged als/ps register field
iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
iio: adc: max9611: Fix attribute measure unit
iio: adc: ti_am335x_adc: allocating too much in probe
iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
iio: proximity: as3935: fix iio_trigger_poll issue
iio: proximity: as3935: fix AS3935_INT mask
iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
iio: proximity: as3935: recalibrate RCO after resume
Linus Torvalds [Sun, 11 Jun 2017 18:21:08 +0000 (11:21 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of user visible fixes (excepting one format string
change).
Four of the qla2xxx fixes only affect the firmware dump path, but it's
still important to the enterprise. The rest are various NULL pointer
crash conditions or outright driver hangs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: libcxgbi: in error case RST tcp conn
scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled
scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
scsi: lpfc: prevent potential null pointer dereference
scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort()
scsi: lpfc: nvmet_fc: fix format string
scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx
scsi: qla2xxx: Fix mailbox pointer error in fwdump capture
scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC
scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues
scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue
scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call
scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive
scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
scsi: qla2xxx: don't disable a not previously enabled PCI device
Linus Torvalds [Sun, 11 Jun 2017 18:15:09 +0000 (11:15 -0700)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"We expanded the device-dax fs type in 4.12 to be a generic provider of
a struct dax_device with an embedded inode. However, Sasha found some
basic negative testing was not run to verify that this fs cleanly
handles being mounted directly.
Note that the fresh rebase was done to remove an unnecessary Cc:
<stable> tag, but this commit otherwise had a build success
notification from the 0day robot."
Wanpeng Li [Fri, 9 Jun 2017 03:13:40 +0000 (20:13 -0700)]
KVM: async_pf: avoid async pf injection when in guest mode
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds.
Not tainted 4.12.0-rc4+ #8
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
gnome-terminal- D 0 1734 1015 0x00000000
Call Trace:
__schedule+0x3cd/0xb30
schedule+0x40/0x90
kvm_async_pf_task_wait+0x1cc/0x270
? __vfs_read+0x37/0x150
? prepare_to_swait+0x22/0x70
do_async_page_fault+0x77/0xb0
? do_async_page_fault+0x77/0xb0
async_page_fault+0x28/0x30
This is triggered by running both win7 and win2016 on L1 KVM simultaneously,
and then gives stress to memory on L1, I can observed this hang on L1 when
at least ~70% swap area is occupied on L0.
This is due to async pf was injected to L2 which should be injected to L1,
L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host
actually), and L1 guest starts accumulating tasks stuck in D state in
kvm_async_pf_task_wait() since missing PAGE_READY async_pfs.
This patch fixes the hang by doing async pf when executing L1 guest.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guenter Roeck [Wed, 3 May 2017 03:44:16 +0000 (20:44 -0700)]
hexagon: Use raw_copy_to_user
Commit ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced
__copy_to_user_hexagon() with raw_copy_to_user(), but did not catch
all callers, resulting in the following build error.
arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon':
arch/hexagon/mm/uaccess.c:40:3: error:
implicit declaration of function '__copy_to_user_hexagon'
Fixes: ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Linus Torvalds [Sat, 10 Jun 2017 18:09:23 +0000 (11:09 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull UFS fixes from Al Viro:
"This is just the obvious backport fodder; I'm pretty sure that there
will be more - definitely so wrt performance and quite possibly
correctness as well"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: we need to sync inode before freeing it
excessive checks in ufs_write_failed() and ufs_evict_inode()
ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
ufs: set correct ->s_maxsize
ufs: restore maintaining ->i_blocks
fix ufs_isblockset()
ufs: restore proper tail allocation
Linus Torvalds [Sat, 10 Jun 2017 18:06:05 +0000 (11:06 -0700)]
Merge branch 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"Some fixes that Dave Sterba collected.
We've been hitting an early enospc problem on production machines that
Omar tracked down to an old int->u64 mistake. I waited a bit on this
pull to make sure it was really the problem from production, but it's
on ~2100 hosts now and I think we're good.
Omar also noticed a commit in the queue would make new early ENOSPC
problems. I pulled that out for now, which is why the top three
commits are younger than the rest.
Otherwise these are all fixes, some explaining very old bugs that
we've been poking at for a while"
* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix delalloc accounting leak caused by u32 overflow
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
btrfs: tree-log.c: Wrong printk information about namelen
btrfs: fix race with relocation recovery and fs_root setup
btrfs: fix memory leak in update_space_info failure path
btrfs: use correct types for page indices in btrfs_page_exists_in_range
btrfs: fix incorrect error return ret being passed to mapping_set_error
btrfs: Make flush bios explicitely sync
btrfs: fiemap: Cache and merge fiemap extent before submit it to user
Linus Torvalds [Sat, 10 Jun 2017 17:51:25 +0000 (10:51 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a Geode fix plus a microcode loader fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/intel: Clear patch pointer before jettisoning the initrd
x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoC
Linus Torvalds [Sat, 10 Jun 2017 17:22:35 +0000 (10:22 -0700)]
Merge branch 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU fixes from Ingo Molnar:
"Fix an SRCU bug affecting KVM IRQ injection"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
srcu: Allow use of Classic SRCU from both process and interrupt context
srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context
Linus Torvalds [Sat, 10 Jun 2017 05:30:55 +0000 (22:30 -0700)]
Merge tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- another compile-fix for my header cleanup
- a couple of fixes for the recently merged IOMMU probe deferal code
- fixes for ACPI/IORT code necessary with IOMMU probe deferal
* tag 'iommu-fixes-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm: dma-mapping: Reset the device's dma_ops
ACPI/IORT: Move the check to get iommu_ops from translated fwspec
ARM: dma-mapping: Don't tear down third-party mappings
ACPI/IORT: Ignore all errors except EPROBE_DEFER
iommu/of: Ignore all errors except EPROBE_DEFER
iommu/of: Fix check for returning EPROBE_DEFER
iommu/dma: Fix function declaration
Linus Torvalds [Sat, 10 Jun 2017 05:28:33 +0000 (22:28 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- mark "guest" RMI device as pass-through port to avoid "phantom" ALPS
toouchpad on newer Lenovo Carbons
- add two more laptops to the Elantech's lists of devices using CRC
mode
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - register F03 port as pass-through serio
Input: elantech - add Fujitsu Lifebook E546/E557 to force crc_enabled
Linus Torvalds [Sat, 10 Jun 2017 05:18:41 +0000 (22:18 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes in the area of block IO, that should go into the next
-rc release. This contains:
- An OOPS fix from Dmitry, fixing a regression with the bio integrity
code in this series.
- Fix truncation of elevator io context cache name, from Eric
Biggers.
- NVMe pull from Christoph includes FC fixes from James, APST
fixes/tweaks from Kai-Heng, removal fix from Rakesh, and an RDMA
fix from Sagi.
- Two tweaks for the block throttling code. One from Joseph Qi,
fixing an oops from the timer code, and one from Shaohua, improving
the behavior on rotatonal storage.
- Two blk-mq fixes from Ming, fixing corner cases with the direct
issue code.
- Locking fix for bfq cgroups from Paolo"
* 'for-linus' of git://git.kernel.dk/linux-block:
block, bfq: access and cache blkg data only when safe
Fix loop device flush before configure v3
blk-throttle: set default latency baseline for harddisk
blk-throttle: fix NULL pointer dereference in throtl_schedule_pending_timer
nvme: relax APST default max latency to 100ms
nvme: only consider exit latency when choosing useful non-op power states
nvme-fc: fix missing put reference on controller create failure
nvme-fc: on lldd/transport io error, terminate association
nvme-rdma: fast fail incoming requests while we reconnect
nvme-pci: fix multiple ctrl removal scheduling
nvme: fix hang in remove path
elevator: fix truncation of icq_cache_name
blk-mq: fix direct issue
blk-mq: pass correct hctx to blk_mq_try_issue_directly
bio-integrity: Do not allocate integrity context for bio w/o data
Linus Torvalds [Sat, 10 Jun 2017 05:15:08 +0000 (22:15 -0700)]
Merge tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This update contains a slightly hight amount of changes due to the
pending ASoC fixes:
- ALSA timer core got a couple of fixes for races between read and
ioctl, leading to potential read of uninitialized kmalloced memory
- ASoC core fixed the de-registration pattern for use-after-free bug
- The rewrite of probe code in ASoC Intel Skylake for i915 component
- ASoC R-snd got a series of fixes for SSI
- ASoC simple-card, atmel, da7213, and rt286 trivial fixes
- HD-audio ALC269 quirk and rearrangement of quirk table"
* tag 'sound-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: timer: Fix missing queue indices reset at SNDRV_TIMER_IOCTL_SELECT
ALSA: timer: Fix race between read and ioctl
ALSA: hda/realtek - Reorder ALC269 ASUS quirk entries
ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UD
ASoC: rsnd: fixup parent_clk_name of AUDIO_CLKOUTx
ASoC: Intel: Skylake: Fix to parse consecutive string tkns in manifest
ASoC: Intel: Skylake: Fix IPC rx_list corruption
ASoC: rsnd: SSI PIO adjust to 24bit mode
MAINTAINERS: Update email address for patches to Wolfson parts
ASoC: Fix use-after-free at card unregistration
ASoC: simple-card: fix mic jack initialization
ASoC: rsnd: don't call free_irq() on Parent SSI
ASoC: atmel-classd: sync regcache when resuming
ASoC: rsnd: don't use PDTA bit for 24bit on SSI
ASoC: da7213: Fix incorrect usage of bitwise '&' operator for SRM check
rt286: add Thinkpad Helix 2 to force_combo_jack_table
ASoC: Intel: Skylake: Move i915 registration to worker thread
Linus Torvalds [Sat, 10 Jun 2017 05:12:06 +0000 (22:12 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, nouveau, rockchip, vmwgfx, imx, meson, mediatek and core fixes.
Bit more spread out fixes this time, fixes for 7 drivers + a couple of
core fixes.
i915 and vmwgfx are the main ones. The vmwgfx ones fix a bunch of
regressions in their atomic rework, and a few fixes destined for
stable. i915 has some 4.12 regressions and older things that need to
be fixed in stable as well.
nouveau also has some runtime pm fixes and a timer list handling fix,
otherwise a couple of core and small driver regression fixes"
* tag 'drm-fixes-for-v4.12-rc5' of git://people.freedesktop.org/~airlied/linux: (37 commits)
drm/i915: fix warning for unused variable
drm/meson: Fix driver bind when only CVBS is available
drm/i915: Fix 90/270 rotated coordinates for FBC
drm/i915: Restore has_fbc=1 for ILK-M
drm/i915: Workaround VLV/CHV DSI scanline counter hardware fail
drm/i915: Fix logical inversion for gen4 quirking
drm/i915: Guard against i915_ggtt_disable_guc() being invoked unconditionally
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
drm/i915: Prevent the system suspend complete optimization
drm/i915/psr: disable psr2 for resolution greater than 32X20
drm/i915: Hold a wakeref for probing the ring registers
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
drm/i915: Disable decoupled MMIO
drm/i915/guc: Remove stale comment for q_fail
drm/vmwgfx: Bump driver minor and date
drm/vmwgfx: Remove unused legacy cursor functions
drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"
drm/vmwgfx: Fix large topology crash
drm/vmwgfx: Make sure to update STDU when FB is updated
drm/vmwgfx: Make sure backup_handle is always valid
...
Al Viro [Fri, 9 Jun 2017 20:20:34 +0000 (16:20 -0400)]
excessive checks in ufs_write_failed() and ufs_evict_inode()
As it is, short copy in write() to append-only file will fail
to truncate the excessive allocated blocks. As the matter of
fact, all checks in ufs_truncate_blocks() are either redundant
or wrong for that caller. As for the only other caller
(ufs_evict_inode()), we only need the file type checks there.
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Omar Sandoval [Fri, 2 Jun 2017 08:20:01 +0000 (01:20 -0700)]
Btrfs: fix delalloc accounting leak caused by u32 overflow
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication,
which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2).
For a nodesize of 16kB, this overflow happens at 16k items. Usually,
num_items is a small constant passed to btrfs_start_transaction(), but
we also use btrfs_calc_trans_metadata_size() for metadata reservations
for extent items in btrfs_delalloc_{reserve,release}_metadata().
In drop_outstanding_extents(), num_items is calculated as
inode->reserved_extents - inode->outstanding_extents. The difference
between these two counters is usually small, but if many delalloc
extents are reserved and then the outstanding extents are merged in
btrfs_merge_extent_hook(), the difference can become large enough to
overflow in btrfs_calc_trans_metadata_size().
The overflow manifests itself as a leak of a multiple of 4 GB in
delalloc_block_rsv and the metadata bytes_may_use counter. This in turn
can cause early ENOSPC errors. Additionally, these WARN_ONs in
extent-tree.c will be hit when unmounting:
Fix it by casting nodesize to a u64 so that
btrfs_calc_trans_metadata_size() does a full 64-bit multiplication.
While we're here, do the same in btrfs_calc_trunc_metadata_size(); this
can't overflow with any existing uses, but it's better to be safe here
than have another hard-to-debug problem later on.
Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Fri, 26 May 2017 23:44:23 +0000 (17:44 -0600)]
Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
Before this, we use 'filled' mode here, ie. if all range has been
filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag
range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG
bits in extent_state until releasing this inode's pages, and that
prevents extent_data from being freed.
This clears the bit if any was found within the ordered extent.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Su Yue [Wed, 24 May 2017 01:31:32 +0000 (09:31 +0800)]
btrfs: tree-log.c: Wrong printk information about namelen
In verify_dir_item, it wants to printk name_len of dir_item but
printk data_len acutally.
Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
Linus Torvalds [Fri, 9 Jun 2017 16:59:51 +0000 (09:59 -0700)]
Merge tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen on ARM when dealing with 64kB page size of a guest"
* tag 'for-linus-4.12b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: Support correctly 64KB page granularity when mapping memory
projects / mirror_ubuntu-hirsute-kernel.git / log