regulator: output current-limit for all regulators in summary
Voltage regulators can have (unregulated) current limits too, so we should
probably output both voltage and current for all regulators.
Holding the rdev->mutex actually conflicts with _regulator_get_current_limit
but also is not really necessary, as the global regulator_list_mutex already
protects us from the regulator vanishing while we go through the list.
On the rk3288-firefly the summary now looks like:
regulator use open bypass voltage current min max
-------------------------------------------------------------------------------
vcc_sys 0 12 0 5000mV 0mA 5000mV 5000mV
vcc_lan 1 1 0 3300mV 0mA 3300mV 3300mV ff290000.ethernet 0mV 0mV
vcca_33 0 0 0 3300mV 0mA 3300mV 3300mV
vcca_18 0 0 0 1800mV 0mA 1800mV 1800mV
vdd10_lcd 0 0 0 1000mV 0mA 1000mV 1000mV
[...]
Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
On modern systems the regulator hierarchy can get quite long and nested
with regulators supplying other regulators. In some cases when debugging
it might be nice to get a tree of these regulators, their consumers
and the regulation constraints in one go.
To achieve this add a regulator_summary sysfs node, similar to
clk_summary in the common clock framework, that walks the regulator
list and creates a tree out of the regulators, their consumers and
core per-regulator settings.
On a rk3288-firefly the regulator_summary would for example look
something like:
kvm_write_guest_cached() does not mark all written pages as dirty and
code comments in kvm_gfn_to_hva_cache_init() talk about NULL memslot
with cross page accesses. Fix all the easy way.
The check is '<= 1' to have the same result for 'len = 0' cache anywhere
in the page. (nr_pages_needed is 0 on page boundary.)
Fixes: 8f964525a121 ("KVM: Allow cross page reads and writes from cached translations.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <20150408121648.GA3519@potion.brq.redhat.com> Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* pci/misc:
PCI: Read capability list as dwords, not bytes
PCI: Don't clear ASPM bits when the FADT declares it's unsupported
PCI: Clarify policy for vendor IDs in pci.txt
PCI/ACPI: Optimize device state transition delays
PCI: Export pci_find_host_bridge() for use inside PCI core
PCI: Make a shareable UUID for PCI firmware ACPI _DSM
PCI: Fix typo in Thunderbolt kernel message
Merge branches 'pci/host-exynos', 'pci/host-iproc', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar' and 'pci/host-versatile' into next
* pci/host-mvebu:
PCI: mvebu: Add suspend/resume support
* pci/host-rcar:
PCI: rcar: Verify that mem_res is 64K-aligned
PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR
PCI: rcar: Write zeroes to reserved PCIEPARL bits
PCI: rcar: Fix position of MSI enable bit
* pci/host-versatile:
PCI: versatile: Check for devm_ioremap_resource() failures
usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume
msleep(USB_RESUME_TIMEOUT) must be done when the controller drives
the resume. This is true after HPRT0_RES is written.
Moreover, restore the delay after controller power is up.
Merge tag 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
New Features
============
*) Add driver for USB PHYs on sun9i
*) Add driver for USB PHY on dm816x
*) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC
Fixes
=====
*) Fix power_on/power_off failure paths in some drivers
*) Make miphy365x use generic PHY type constants
*) Fix build errors due to missing export symbols in qcom-ufs driver
*) Make all the functions return proper error values
Cleanups
========
*) use PTR_ERR_OR_ZERO to simplify code
*) use devm_kcalloc instead of devm_kzalloc with multiply
*) remove un-necessary ifdef CONFIG_OF
Peter Griffin [Fri, 10 Apr 2015 09:40:29 +0000 (10:40 +0100)]
mmc: sdhci-st: Update ST SDHCI binding documentation.
This patch updates the binding information to reflect the
extra dt options which are now supported by the sdhci-st.c
driver which enable support for stih407 family silicon.
STiH410 SoC and later support UHS modes for eMMC, so the
driver now makes use of these common bindings. Examples
are provided for both eMMC (which has additional bindings)
and also sd slot for STiH407.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow UHS modes to work properly we need to provide the st specific
set_uhs_signaling callback function. This function differs from the
generic sdhci_set_uhs_signaling callback in that we need to configure
the correct delay depending on the UHS mode, and also set the V18_EN
bit.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Peter Griffin [Fri, 10 Apr 2015 09:40:26 +0000 (10:40 +0100)]
mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.
STiH407 family SoC's have glue registers in the flashSS subsystem which
are used to configure the Arasan HC. This patch configures these glue
registers according to what has been specified in the DT.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Peter Griffin [Fri, 10 Apr 2015 09:40:25 +0000 (10:40 +0100)]
mmc: sdhci-st: Add delay management functions for top registers (eMMC).
Due to the tight timing constraints in some UHS modes, it is required to have
some delay management in the design. Two types of delay management are supported
in the HW: -
NB: The delay management is only there when eMMC interface is selected.
1: Static delay management: is used to provide PVT dependent static delay on the
clock/data lines to manage setup/hold requirements of the interface. The maximum
delay possible is 3.25ns. These delays are PVT dependent, and thus delay values
applied are not accurate and vary across provcess voltage and temperature range.
Due to this these delays must not be used on the very time critical paths.
2. Dynamic delay locked loop (DLL): is used to provide dynamic delay management.
The advantage of DLL is that it provides accurate & PVT indepedent delay.
The DLL is used to provide delay on the loopback clock on "Read Path" to capture
read data reliably. On TX path the clock on which output data is transmitted is
delayed, resulting in delay of TX data.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Peter Griffin [Fri, 10 Apr 2015 09:40:24 +0000 (10:40 +0100)]
mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource
STiH407 family SoC's can have a reset signal for the controller which needs to
be managed. Also the eMMC controller has some additional 'top' memory mapped
registers which are used to manage the dynamic and static delay required for
UHS modes. This patch adds support for creating the mapping, which will be used
by subsequent patches.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Mike Travis [Thu, 9 Apr 2015 18:26:30 +0000 (13:26 -0500)]
x86/apic/uv: Update the UV APIC driver check
Fix a bug in the OEM check function that determines if the
system is a UV system and the BIOS is compatible with the
kernel's UV apic driver. This prevents some possibly obscure
panics and guards the system against being started on SGI
hardware that does not have the required kernel support.
nios2: fix cache coherency issue when debug with gdb
Remove the end address checking for flushda function. We need to flush
each address line for flushda instruction, from start to end address.
This is because flushda instruction only flush the cache if tag and line
fields are matched.
Change to use ldwio instruction (bypass cache) to load the instruction
that causing trap. Our interest is the actual instruction that executed
by the processor, this should be uncached.
Note, EA address might be an userspace cached address.
Merge tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are stable-candidate fixes of some recently reported issues in
the cpufreq core, cpuidle core, the ACPI cpuidle driver and the
hibernate core.
Specifics:
- Revert a 3.17 hibernate commit that was supposed to fix an issue
related to e820 reserved regions, but broke resume from hibernation
on Lenovo x230 (Rafael J Wysocki).
- Prevent the ACPI cpuidle driver from overwriting the name and
description of the C0 state set by the core when the list of
C-states changes (Thomas Schlichter).
- Remove the no longer needed state_count field from struct
cpuidle_device which prevents the list of C-states shown by the
sysfs interface from becoming incorrect when the current number of
them is different from the number of C-states on boot (Bartlomiej
Zolnierkiewicz).
- The cpufreq core updates the policy object of the only online CPU
during system resume to make it reflect the current hardware state,
but it always assumes that CPU to be CPU0 which need not be the
case, so fix the code to avoid that assumption (Viresh Kumar)"
* tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
cpuidle: ACPI: do not overwrite name and description of C0
cpuidle: remove state_count field from struct cpuidle_device
cpufreq: Schedule work for the first-online CPU on resume
devm_ioremap_resource() validates the resource it receives, so if we check
for devm_ioremap_resource() failure, we need not check for failure of the
preceding platform_get_resource().
PCI: keystone: Don't dereference possible NULL pointer
Check for failure from platform_get_resource() (this check actually happens
inside devm_ioremap_resource()) before dereferencing the pointer returned
from platform_get_resource().
PCI: versatile: Check for devm_ioremap_resource() failures
Check for failure of devm_ioremap_resource().
devm_ioremap_resource() validates the resource it receives, so if we check
for devm_ioremap_resource() failure, we need not check for failure of the
preceding platform_get_resource().
Matthew Garrett [Tue, 7 Apr 2015 18:07:00 +0000 (11:07 -0700)]
PCI: Don't clear ASPM bits when the FADT declares it's unsupported
Communications with a hardware vendor confirm that the expected behaviour
on systems that set the FADT ASPM disable bit but which still grant full
PCIe control is for the OS to leave any BIOS configuration intact and
refuse to touch the ASPM bits. This mimics the behaviour of Windows.
Signed-off-by: Matthew Garrett <mjg59@coreos.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Merge tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are some fixes for v4.0. I apologize for how late they are. We
were hoping for some better fixes, but couldn't get them polished in
time. These fix:
- a Xen domU oops with PCI passthrough devices
- a sparc T5 boot failure
- a STM SPEAr13xx crash (use after initdata freed)
- a cpcihp hotplug driver thinko
- an AER thinko that printed stack junk
Details:
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
PCI/AER: Avoid info leak in __print_tlp_header()
PCI: spear: Drop __initdata from spear13xx_pcie_driver
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"
Al Viro [Wed, 8 Apr 2015 21:00:32 +0000 (17:00 -0400)]
ocfs2: _really_ sync the right range
"ocfs2 syncs the wrong range" had been broken; prior to it the
code was doing the wrong thing in case of O_APPEND, all right,
but _after_ it we were syncing the wrong range in 100% cases.
*ppos, aka iocb->ki_pos is incremented prior to that point,
so we are always doing sync on the area _after_ the one we'd
written to.
Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
unfortunately, I'd missed his mail back then ;-/
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()
This is a preparatory patch for moving stub32_execve[at]() to this
file. It makes sense to have all execve stubs in one place, so
that they can reuse code.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1428439424-7258-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Anton Blanchard [Thu, 9 Apr 2015 03:51:30 +0000 (13:51 +1000)]
jump_label: Allow asm/jump_label.h to be included in assembly
Wrap asm/jump_label.h for all archs with #ifndef __ASSEMBLY__.
Since these are kernel only headers, we don't need #ifdef
__KERNEL__ so can simplify things a bit.
If an architecture wants to use jump labels in assembly, it
will still need to define a macro to create the __jump_table
entries (see ARCH_STATIC_BRANCH in the powerpc asm/jump_label.h
for an example).
Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: benh@kernel.crashing.org Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: heiko.carstens@de.ibm.com Cc: jbaron@akamai.com Cc: linux@arm.linux.org.uk Cc: linuxppc-dev@lists.ozlabs.org Cc: liuj97@gmail.com Cc: mgorman@suse.de Cc: mmarek@suse.cz Cc: mpe@ellerman.id.au Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rostedt@goodmis.org Cc: schwidefsky@de.ibm.com Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1428551492-21977-1-git-send-email-anton@samba.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently it is not possible to use 'mmc-pwrseq-simple' property with this
driver because mmc_of_parse() is never called.
mmc_of_parse() calls mmc_pwrseq_alloc() that manages MMC power sequence and
allows passing GPIOs in the devicetree to properly power/reset the Wifi
chipset.
When using mmc_of_parse() we no longer need to have custom code to request
card-detect and write-protect pins, as this can now be handled by the mmc
core.
Tested on a imx6sl-warp board where BT/Wifi is functional and also on a
imx6q-sabresd.
Doug Anderson [Fri, 3 Apr 2015 18:13:07 +0000 (11:13 -0700)]
mmc: dw_mmc: Add locking around cmd11 timer
It is possible for the cmd11 interrupt to fire and delete the
cmd11_timer before the cmd11_timer was actually setup. Let's fix this
race by adding a few spinlocks. Note that the race wasn't seen in
practice without adding some printk statements, but it still seems
wise to fix.
Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Doug Anderson [Fri, 3 Apr 2015 18:13:06 +0000 (11:13 -0700)]
mmc: dw_mmc: Add a return in an unexpected cmd11 timeout
If we get an unexpected cmd11 timeout we shouldn't actually treat it
as a timeout (not that we really expect to get an unexpected cmd11
timeout, but still).
Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Doug Anderson [Fri, 3 Apr 2015 18:13:05 +0000 (11:13 -0700)]
mmc: dw_mmc: Increase cmd11 timeout to 500ms
Although the cmd11 interrupt should come within 2ms, that's a very
short time. Let's increase the timeout to be really sure that we
don't get an accidnetal timeout. One case in particular this is
useful is if you've got a serial console and printk in just the right
places. Under that scenario I've seen delays of up to 130ms before
the interrupt fired.
CMD11 is only sent during card insertion, so this extra timeout
shouldn't be terrible.
Fixes: 5c935165da79 ("mmc: dw_mmc: Add a timeout for sending CMD11") Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ben Dooks [Wed, 25 Mar 2015 11:27:52 +0000 (11:27 +0000)]
mmc: dw_mmc: fix fifo ordering in big endian
The dw_mmc driver changes to make the IO accesors endian agnostic did not
take into account the fifo accesses do not need to be swapped. To fix this
add a mmci_fifo_read/write wrapper to allow these to be passed through the
IO without being swapped.
Since these are now specific functions, it would be easier just to store
the pointer to the fifo registers in the host block instead of the offset
to them. So change the host->data_offset to host->fifo_reg (which also
means we catch all the places this is read or written).
Ben Dooks [Wed, 25 Mar 2015 11:27:51 +0000 (11:27 +0000)]
mmc: dw_mmc: change idmac descriptor files to __le32
The dw_mmc driver does not take into account the processor may be in
big endian when writing the descriptors. Change the descriptors for
the 32bit IDMA to use __le32 and ensure they are suitably swapped
before writing.
Note, this has not been tested as the socfpga driver does not try to
use idma.
Jason Low [Wed, 8 Apr 2015 19:39:19 +0000 (12:39 -0700)]
locking/mutex: Further simplify mutex_spin_on_owner()
Similar to what Linus suggested for rwsem_spin_on_owner(), in
mutex_spin_on_owner() instead of having while (true) and
breaking out of the spin loop on lock->owner != owner, we can
have the loop directly check for while (lock->owner == owner) to
improve the readability of the code.
It also shrinks the code a bit:
text data bss dec hex filename
3721 0 0 3721 e89 mutex.o.before
3705 0 0 3705 e79 mutex.o.after
Signed-off-by: Jason Low <jason.low2@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1428521960-5268-2-git-send-email-jason.low2@hp.com
[ Added code generation info. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
hwmon: (ibmpowernv) Fix build error seen for some configurations
Fix
drivers/hwmon/ibmpowernv.c: In function 'get_logical_cpu':
drivers/hwmon/ibmpowernv.c:121:3:
error: implicit declaration of function 'get_hard_smp_processor_id'
seen for some configurations, possibly if SMP is not configured.
hwmon: (gpio-fan) Move the thermal registration after registration is complete
Thermal framework may already be ready and cooling policies might
already be functional when we are attempting to register gpio fan as
a cooling device. This can be reproduced by changing probe order in
which registration of various modules are done in a system. In such
a case, kernel generates an oops since the data structures are not
completely populated with the wrong assumption that thermal framework
is not yet ready. Fix this by reordering the thermal framework
registration to occur after hwmon registration of the fan is complete.
Example kernel oops:
[ 149.005828] Unable to handle kernel NULL pointer dereference at virtual address 0000008c
[ 149.014369] pgd = ecf48000
[ 149.017204] [0000008c] *pgd=ac065831, *pte=00000000, *ppte=00000000
[ 149.023820] Internal error: Oops: 17 [#1] SMP ARM
[ 149.028745] Modules linked in: gpio_fan(+) cpufreq_dt ipv6 evdev leds_gpio led_class omap_wdt phy_omap_usb2 rtc_palmas palmas_pwrbutton tmp102 ti_soc_thermal dwc3_omap thermal_sys extcon rtc_omap rtc_ds1307 hwmon
[ 149.048629] CPU: 1 PID: 1183 Comm: modprobe Not tainted 4.0.0-rc7-next-20150407-00002-g7a82da074c99 #3
[ 149.058383] Hardware name: Generic DRA74X (Flattened Device Tree)
[ 149.064763] task: edec1240 ti: ec0e0000 task.ti: ec0e0000
[ 149.070421] PC is at dev_driver_string+0x0/0x38
[ 149.075165] LR is at __dev_printk+0x24/0x70
[ 149.079540] pc : [<c03d6cd0>] lr : [<c03d72c4>] psr: 20000013
[ 149.079540] sp : ec0e1c28 ip : edec1240 fp : 00000000
[ 149.091568] r10: edf3eee0 r9 : 00000000 r8 : ffffffff
[ 149.097040] r7 : edf3eea0 r6 : 00000034 r5 : 00000010 r4 : ec0e1c44
[ 149.103871] r3 : ec0e1c4c r2 : ec0e1c44 r1 : c079d800 r0 : 00000010
[ 149.110709] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 149.118182] Control: 10c5387d Table: acf4806a DAC: 00000015
[ 149.124198] Process modprobe (pid: 1183, stack limit = 0xec0e0218)
[ 149.130673] Stack: (0xec0e1c28 to 0xec0e2000)
[ 149.135235] 1c20: 60000013c05e2ae000000000edf3ec00ec934a10c03d73d4
...
[ 149.392230] 1fe0: befe1888befe187800019418b6ea08f080000010000000030000000000000000
[ 149.400798] [<c03d6cd0>] (dev_driver_string) from [<c03d72c4>] (__dev_printk+0x24/0x70)
[ 149.409193] [<c03d72c4>] (__dev_printk) from [<c03d73d4>] (dev_warn+0x34/0x48)
[ 149.416767] [<c03d73d4>] (dev_warn) from [<bf0f54fc>] (get_fan_speed_index+0x94/0xa4 [gpio_fan])
[ 149.425980] [<bf0f54fc>] (get_fan_speed_index [gpio_fan]) from [<bf0f5524>] (gpio_fan_get_cur_state+0x18/0x30 [gpio_fan])
[ 149.437476] [<bf0f5524>] (gpio_fan_get_cur_state [gpio_fan]) from [<bf02767c>] (thermal_zone_trip_update+0xe8/0x2a4 [thermal_sys])
[ 149.449794] [<bf02767c>] (thermal_zone_trip_update [thermal_sys]) from [<bf027844>] (step_wise_throttle+0xc/0x74 [thermal_sys])
[ 149.461832] [<bf027844>] (step_wise_throttle [thermal_sys]) from [<bf024ff4>] (handle_thermal_trip+0x5c/0x188 [thermal_sys])
[ 149.473603] [<bf024ff4>] (handle_thermal_trip [thermal_sys]) from [<bf0256c4>] (thermal_zone_device_update+0x94/0x108 [thermal_sys])
[ 149.486104] [<bf0256c4>] (thermal_zone_device_update [thermal_sys]) from [<bf026470>] (__thermal_cooling_device_register+0x2e8/0x374 [thermal_sys])
[ 149.499956] [<bf026470>] (__thermal_cooling_device_register [thermal_sys]) from [<bf0f58e4>] (gpio_fan_probe+0x350/0x4d0 [gpio_fan])
[ 149.512438] [<bf0f58e4>] (gpio_fan_probe [gpio_fan]) from [<c03db8a0>] (platform_drv_probe+0x48/0x98)
[ 149.522109] [<c03db8a0>] (platform_drv_probe) from [<c03da30c>] (driver_probe_device+0x1b0/0x26c)
[ 149.531399] [<c03da30c>] (driver_probe_device) from [<c03da45c>] (__driver_attach+0x94/0x98)
[ 149.540238] [<c03da45c>] (__driver_attach) from [<c03d8bb0>] (bus_for_each_dev+0x54/0x88)
[ 149.548814] [<c03d8bb0>] (bus_for_each_dev) from [<c03d9a34>] (bus_add_driver+0xdc/0x1d4)
[ 149.557381] [<c03d9a34>] (bus_add_driver) from [<c03dac30>] (driver_register+0x78/0xf4)
[ 149.565765] [<c03dac30>] (driver_register) from [<c0009784>] (do_one_initcall+0x80/0x1d8)
[ 149.574340] [<c0009784>] (do_one_initcall) from [<c00c2278>] (do_init_module+0x5c/0x1b8)
[ 149.582833] [<c00c2278>] (do_init_module) from [<c00c3bbc>] (load_module+0x1720/0x1dcc)
[ 149.591212] [<c00c3bbc>] (load_module) from [<c00c43d0>] (SyS_finit_module+0x68/0x6c)
[ 149.599418] [<c00c43d0>] (SyS_finit_module) from [<c000f3c0>] (ret_fast_syscall+0x0/0x4c)
[ 149.607994] Code: 15830000e1a00006e28dd008e8bd8070 (e590307c)
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Final drm fixes: one core locking imbalance regression, and a bunch of
i915 baytrail s/r fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fix drm_mode_getconnector() locking imbalance regression
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph revert from Sage Weil:
"This corrects a recent misadventure with __GFP_MEMALLOC and
PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better
off relying on dirty page throttling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
Revert "libceph: use memalloc flags for net IO"
Merge misc fixes from Andrew Morton:
"Three fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: numa: disable change protection for vma(VM_HUGETLB)
include/linux/dmapool.h: declare struct device
mm: move zone lock to a different cache line than order-0 free page lists
Copy the kernel module data from user space in chunks
Unlike most (all?) other copies from user space, kernel module loading
is almost unlimited in size. So we do a potentially huge
"copy_from_user()" when we copy the module data from user space to the
kernel buffer, which can be a latency concern when preemption is
disabled (or voluntary).
Also, because 'copy_from_user()' clears the tail of the kernel buffer on
failures, even a *failed* copy can end up wasting a lot of time.
Normally neither of these are concerns in real life, but they do trigger
when doing stress-testing with trinity. Running in a VM seems to add
its own overheadm causing trinity module load testing to even trigger
the watchdog.
The simple fix is to just chunk up the module loading, so that it never
tries to copy insanely big areas in one go. That bounds the latency,
and also the amount of (unnecessarily, in this case) cleared memory for
the failure case.
The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around. Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).
However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer. Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.
Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case. Which is just stupid, since that case shouldn't happen in the
first place.
Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not. And then just use
memset() to clear the tail of the kernel buffer if necessary.
Marc Zyngier [Wed, 18 Mar 2015 11:01:22 +0000 (11:01 +0000)]
genirq: Allow the irqchip state of an IRQ to be save/restored
There is a number of cases where a kernel subsystem may want to
introspect the state of an interrupt at the irqchip level:
- When a peripheral is shared between virtual machines,
its interrupt state becomes part of the guest's state,
and must be switched accordingly. KVM on arm/arm64 requires
this for its guest-visible timer
- Some GPIO controllers seem to require peeking into the
interrupt controller they are connected to to report
their internal state
This seem to be a pattern that is common enough for the core code
to try and support this without too many horrible hacks. Introduce
a pair of accessors (irq_get_irqchip_state/irq_set_irqchip_state)
to retrieve the bits that can be of interest to another subsystem:
pending, active, and masked.
- irq_get_irqchip_state returns the state of the interrupt according
to a parameter set to IRQCHIP_STATE_PENDING, IRQCHIP_STATE_ACTIVE,
IRQCHIP_STATE_MASKED or IRQCHIP_STATE_LINE_LEVEL.
- irq_set_irqchip_state similarly sets the state of the interrupt.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Phong Vo <pvo@apm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tin Huynh <tnhuynh@apm.com> Cc: Y Vo <yvo@apm.com> Cc: Toan Le <toanle@apm.com> Cc: Bjorn Andersson <bjorn@kryo.se> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1426676484-21812-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The ITS msi_prepare callback having failed, we end-up trying to
free MSIs that have never been allocated. Oddly enough, the kernel
is pretty upset about it.
It turns out that this behaviour was expected before the MSI domain
was introduced (and dealt with in arch_teardown_msi_irqs).
The obvious fix is to detect this early enough and bail out.
Aaron Lu [Wed, 25 Mar 2015 06:37:06 +0000 (14:37 +0800)]
PCI/ACPI: Optimize device state transition delays
The PCI "ACPI additions for FW latency optimizations" ECN (link below)
defines two functions in the PCI _DSM:
Function 8, "Reset Delay," applies to the entire hierarchy below a PCI
host bridge. If it returns one, the OS may assume that all devices in
the hierarchy have already completed power-on reset delays.
Function 9, "Device Readiness Durations," applies only to the object
where it is located. It returns delay durations required after various
events if the device requires less time than the spec requires. Delays
from this function take precedence over the Reset Delay function.
Add support for Reset Delay and part of Device Readiness Durations.
Dave Airlie [Wed, 8 Apr 2015 20:59:50 +0000 (06:59 +1000)]
Merge tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes
three commits, all cc: stable, to address Baytrail
suspend/resume issues.
* tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
When the CONTINUE bit is set, the interrupt status we are polling to
identify if a transaction has finished can be sporadic. Even though
the transfer has finished, the interrupt status may erroneously
indicate that there is still data in the FIFO. This behaviour causes
random timeouts in large PIO transfers.
Instead of using the CONTINUE bit to control the CS lines, use the SPI
core's CS GPIO handling. Also, now that the CONTINUE bit is not being
used, we can poll for the ALLDONE interrupt to indicate transfer
completion.
Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
spi: img-spfi: Reset controller after each message
Imagination has recommended that the SPFI controller be reset after
each message, regardless of success or failure. Do this in an
unprepare_message() callback.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be greatly simplified by moving the transfer timeout
handling to a handle_err() callback.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Aaron Lu [Wed, 25 Mar 2015 06:31:41 +0000 (14:31 +0800)]
PCI: Make a shareable UUID for PCI firmware ACPI _DSM
The PCI Firmware Specification, r3.0, sec 4.6.4.1.3, defines a single UUID
for an ACPI _DSM method to provide device-specific control functions. This
_DSM method support several functions, including PCI Express Slot
Information, PCI Express Slot Number, PCI Bus Capabilities, etc.
Move the UUID definition from pci/pci-label.c, where it could be used only
for one function, to pci/pci-acpi.c where it can be shared for all these
functions.
[bhelgaas: changelog] Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ALSA: hda - Fix headphone pin config for Lifebook T731
Some BIOS version of Fujitsu Lifebook T731 seems to set up the
headphone pin (0x21) without the assoc number 0x0f while it's set only
to the output on the docking port (0x1a). With the recent commit
[03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when
there are two DACs], this resulted in the weird mixer element
mapping where the headphone on the laptop is assigned as a shared
volume with the speaker and the docking port is assigned as an
individual headphone.
This patch improves the situation by correcting the headphone pin
config to the more appropriate value.
Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new OPAL device tree adds a few properties which can be used to add
extra information on the sensor label.
In the case of a cpu core sensor, the firmware exposes the physical
identifier of the core in the "ibm,pir" property. The driver
translates this identifier in a linux cpu number and prints out a
range corresponding to the hardware threads of the core (as they
share the same sensor).
The numbering gives a hint on the localization of the core in the
system (which socket, which chip).
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, sensors are only identified by their type and index.
The new OPAL device tree can expose extra properties to identify
some sensors by their name or location. This patch adds the creation
of a new hwmon *_label attribute when such properties are detected.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (ibmpowernv) add support for the new device tree
The new OPAL device tree for sensors has a different layout and uses new
property names, for the type and for the handler used to capture the
sensor data.
This patch modifies the ibmpowernv driver to support such a tree in a
way preserving compatibility with older OPAL firmwares.
This is achieved by changing the error path of the routine parsing
an OPAL node name. The node is simply considered being from the new
device tree layout and fallback values are used.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bart Van Assche [Wed, 4 Mar 2015 09:31:47 +0000 (10:31 +0100)]
Defer processing of REQ_PREEMPT requests for blocked devices
SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:
Reported-by: Max Gurtuvoy <maxg@mellanox.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
John Soni Jose [Thu, 12 Feb 2015 01:15:47 +0000 (06:45 +0530)]
be2iscsi: Fix kernel panic when device initialization fails
Kernel panic was happening as iscsi_host_remove() was called on
a host which was not yet added.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
ALSA: bebob: fix to processing in big-endian machine for sending cue
Some M-Audio devices require to receive bootup command just after
powering on, while codes in BeBoB driver doesn't work properly in
big-endian machine because the command should be aligned by
little-endian.
This commit fixes this bug. This fix should go to stable kernel.
David Ahern reported that d63e2e1f3df9 breaks booting on an 8-socket T5
sparc system. He also verified that the system boots with d63e2e1f3df9
reverted. Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.
Bjorn Helgaas [Tue, 24 Mar 2015 16:12:45 +0000 (11:12 -0500)]
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
Booting a v3.18 or newer Xen domU kernel with PCI devices passed through
results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0
hypervisor and 32-bit domU):
Don't look for ACPI configuration information if ACPI has been disabled.
I don't think this is the best fix, because we can boot plain Linux (no
Xen) with "acpi=off", and we don't need this check in pci_get_hp_params().
There should be a better fix that would make Xen domU work the same way.
The domU kernel has ACPI support but it has no AML. There should be a way
to initialize the ACPI data structures so things fail gracefully rather
than oopsing. This is an interim fix to address the regression.
Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301 Reported-by: Michael D Labriola <mlabriol@gdeb.com> Tested-by: Michael D Labriola <mlabriol@gdeb.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.18+
Tidy up error reporting and move rpm reference retrieval out of the for
loop for improved readability.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>