This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping
error check, in case some frag's dma map fails, we need to move back and remove
previously queued buffers.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Dec 2014 18:06:57 +0000 (13:06 -0500)]
Merge branch 'fec-next'
Fugang Duan says:
====================
net: fec: add Wake-on-LAN support
The patch series enable FEC Wake-on-LAN feature for i.MX6q/dl and i.MX6SX SOCs.
FEC HW support sleep mode, when system in suspend status with FEC all clock gate
off, magic packet can wake up system. For different SOCs, there have special SOC
GPR register to let FEC enter sleep mode or exit sleep mode, add these to platform
callback for driver' call.
Patch#1: add WOL interface supports.
Patch#2: add SOC special sleep of/off operations for driver's sleep callback.
Patch#3: add magic pattern support for devicetree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Wed, 24 Dec 2014 09:30:40 +0000 (17:30 +0800)]
ARM: imx: add FEC sleep mode callback function
i.MX6q/dl, i.MX6SX SOCs enet support sleep mode that magic packet can
wake up system in suspend status. For different SOCs, there have some
SOC specifical GPR register to set sleep on/off mode. So add these to
callback function for driver.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nimrod Andy [Wed, 24 Dec 2014 09:30:39 +0000 (17:30 +0800)]
net: fec: add Wake-on-LAN support
Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode
in low power status, when system enter suspend status, Magic packet can
wake up system even if all SOC clocks are gate. The patch doing below things:
- flagging the device as a wakeup source for the system, as well as
its Wake-on-LAN interrupt
- prepare the hardware for entering WoL mode
- add standard ethtool WOL interface
- enable the ENET interrupt to wake us
Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards.
Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hao [Wed, 24 Dec 2014 06:05:45 +0000 (14:05 +0800)]
net: gianfar: add missing __iomem annotation
Fix the following spare warning:
drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:3521:60: expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:3521:60: got unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:205:16: expected unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16: got unsigned int [noderef] <asn:2>*<noident>
drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:2918:44: expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:2918:44: got unsigned int [usertype] *rfbptr
Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 24 Dec 2014 03:03:52 +0000 (11:03 +0800)]
virtio-net: don't do header check for dodgy gso packets
There's no need to do header check for virtio-net since:
- Host sets dodgy for all gso packets from guest and check the header.
- Host should be prepared for all kinds of evil packets from guest, since
malicious guest can send any kinds of packet.
So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check.
Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
arm: sa1100: move irda header to linux/platform_data
In the end asm/mach/irda.h header is not used by anybody except sa1100.
Move the header to the platform data includes dir and rename it to
irda-sa11x0.h.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 30 Dec 2014 23:30:00 +0000 (18:30 -0500)]
Merge branch 'timecounter'
Richard Cochran says:
====================
Time Counter fixes and improvements
Several PTP Hardware Clock (PHC) drivers implement the clock in
software using the timecounter/cyclecounter code. This series adds one
simple improvement and one more subtle fix to the shared timecounter
facility. Credit for this series goes to Janusz Użycki, who pointed
the issues out to me off list.
Patch #1 simply move the timecounter code into its own file. When
working on this series, it was really annoying to see half the kernel
recompile after every tweak to the timecounter stuff. There is no
reason to keep this together with the clocksource code.
Patch #2 implements an improved adjtime() method, and patches 3-10
convert all of the drivers over to the new method.
Patch #11 fixes a subtle but important issue with the timecounter WRT
frequency adjustment. As it stands now, a timecounter based PHC will
exhibit a variable frequency resolution (and variable time error)
depending on how often the clock is read.
In timecounter_read_delta(), the expression
(delta * cc->mult) >> cc->shift;
can lose resolution from the adjusted value of 'mult'. If the value
of 'delta' is too small, then small changes in 'mult' have no effect.
However, if the delta value is large enough, then small changes in
'mult' will have an effect.
Reading the clock too often means smaller 'delta' values which in turn
will spoil the fine adjustments made to 'mult'. Up until now, this
effect did not show up in my testing. The following example explains
why.
The CPTS has an input clock of 250 MHz, and the clock source uses
mult=0x80000000 and shift=29, making the ticks to nanoseconds
conversion like this:
ticks * 2^31
------------
2^29
Imagine what happens if the clock is read every 10 milliseconds. Ten
milliseconds are about 2500000 ticks, which corresponds to about 21
bits. The product in the numerator has then 52 bits. After the shift
operation, 23 bits are preserved. This results in a frequency
adjustment resolution of about 0.1 ppm (not _too_ bad.)
A frequency resolution of 1 ppm requires 20 bits.
A frequency resolution of 1 ppb requires 30 bits.
For the 250 MHz CPTS clock, reading every 4 seconds yields a 1 ppb
resolution (which is the finest that our API allows).
However, the error can be much higher if the clock is read too often
or if time stamps occur close in time to read operations. In general
it is really not acceptable to allow the rate of clock readings to
influence the clock accuracy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:06 +0000 (19:47 +0100)]
timecounter: keep track of accumulated fractional nanoseconds
The current timecounter implementation will drop a variable amount
of resolution, depending on the magnitude of the time delta. In
other words, reading the clock too often or too close to a time
stamp conversion will introduce errors into the time values. This
patch fixes the issue by introducing a fractional nanosecond field
that accumulates the low order bits.
Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:03 +0000 (19:47 +0100)]
net: ixgbe: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:02 +0000 (19:47 +0100)]
net: igb: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:47:01 +0000 (19:47 +0100)]
net: e1000e: convert to timecounter adjtime.
This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:46:57 +0000 (19:46 +0100)]
timecounter: provide a helper function to shift the time.
Some PTP Hardware Clock drivers use a struct timecounter to represent
their clock. To adjust the time by a given offset, these drivers all
perform a two step read/write of their timecounter. However, it is
better and simpler just to adjust the offset in one step. This patch
introduces a little routine to help drivers implement the adjtime
method.
Suggested-by: Janusz Użycki <j.uzycki@elproma.com.pl> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Sun, 21 Dec 2014 18:46:56 +0000 (19:46 +0100)]
time: move the timecounter/cyclecounter code into its own file.
The timecounter code has almost nothing to do with the clocksource
code. Let it live in its own file. This will help isolate the
timecounter users from the clocksource users in the source tree.
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.
2) Fix receive checksum handling in enic driver, from Govindarajulu
Varadarajan.
3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
Herbert Xu. Also, add code to detect drivers that have this mistake
in the future.
4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.
5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
input path,f rom Nicolas Dichtel.
6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.
7) Fix double SKB free in vxlan driver, also from Pravin.
8) When we scrub a packet, which happens when we are switching the
context of the packet (namespace, etc.), we should reset the
secmark. From Thomas Graf.
9) ->ndo_gso_check() needs to do more than return true/false, it also
has to allow the driver to clear netdev feature bits in order for
the caller to be able to proceed properly. From Jesse Gross.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
netlink/genetlink: pass network namespace to bind/unbind
ne2k-pci: Add pci_disable_device in error handling
bonding: change error message to debug message in __bond_release_one()
genetlink: pass multicast bind/unbind to families
netlink: call unbind when releasing socket
netlink: update listeners directly when removing socket
genetlink: pass only network namespace to genl_has_listeners()
netlink: rename netlink_unbind() to netlink_undo_bind()
net: Generalize ndo_gso_check to ndo_features_check
net: incorrect use of init_completion fixup
neigh: remove next ptr from struct neigh_table
net: xilinx: Remove unnecessary temac_property in the driver
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
openvswitch: fix odd_ptr_err.cocci warnings
Bluetooth: Fix accepting connections when not using mgmt
Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
brcmfmac: Do not crash if platform data is not populated
ipw2200: select CFG80211_WEXT
...
Linus Torvalds [Tue, 30 Dec 2014 05:09:57 +0000 (21:09 -0800)]
Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS fixes from Steve French:
"A set of three minor cifs fixes"
* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make new inode cache when file type is different
Fix signed/unsigned pointer warning
Convert MessageID in smb2_hdr to LE
Linus Torvalds [Tue, 30 Dec 2014 04:43:10 +0000 (20:43 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF & isofs fixes from Jan Kara:
"A couple of UDF fixes of handling of corrupted media and one iso9660
fix of the same"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Reduce repeated dereferences
udf: Check component length before reading it
udf: Check path length when reading symlink
udf: Verify symlink size before loading it
udf: Verify i_size when loading inode
isofs: Fix unchecked printing of ER records
Linus Torvalds [Tue, 30 Dec 2014 02:50:02 +0000 (18:50 -0800)]
Merge tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI material from Rafael J Wysocki:
"These are fixes (operating performance points library, cpufreq-dt
driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
(cpuidle), new processor IDs for the RAPL (Running Average Power
Limit) power capping driver, and a modification of the generic power
domains framework allowing modular drivers to call one of its helper
functions.
Specifics:
- Fix for a potential NULL pointer dereference in the cpufreq core
due to an initialization race condition (Ethan Zhao).
- Fixes for abuse of the OPP (Operating Performance Points) API
related to RCU and other minor issues in the OPP library and the
cpufreq-dt driver (Dmitry Torokhov).
- cpuidle governors cleanup making them measure idle duration in a
better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
allows that flag to be dropped from the ACPI cpuidle driver and
from the core too (Len Brown).
- New ACPI backlight blacklist entries for Samsung machines without a
working native backlight interface that need to use the ACPI
backlight instead (Aaron Lu).
- New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
capping driver (Jacob Pan).
- Generic power domains framework modification to export the
of_genpd_get_from_provider() function to modular drivers that will
allow future driver modifications to be based on the mainline (Amit
Daniel Kachhap).
- Two fixes for the cpupower tool (Michal Privoznik, Prarit
Bhargava)"
* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / video: Add some Samsung models to disable_native_backlight list
tools / cpupower: Fix no idle state information return value
tools / cpupower: Correctly detect if running as root
cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
cpufreq-dt: defer probing if OPP table is not ready
PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
PM / OPP: fix warning in of_free_opp_table()
PM / OPP: add some lockdep annotations
powercap / RAPL: add IDs for future Xeon CPUs
PM / Domains: Export of_genpd_get_from_provider function
cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
Linus Torvalds [Mon, 29 Dec 2014 21:30:50 +0000 (13:30 -0800)]
Merge tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes here, the DMA burst size increase in the
spfi driver is a fix to make the hardware happier in some situations"
* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: img-spfi: Increase DMA burst size
spi: img-spfi: Enable controller before starting TX DMA
spi: sh-msiof: Add runtime PM lock in initializing
Linus Torvalds [Mon, 29 Dec 2014 21:24:38 +0000 (13:24 -0800)]
Merge tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull one regulator fix from Mark Brown:
"One fix here, a fix for the voltage mapping on one of the s2mps11
regulators which broke systems using it including apparently the
Gear 2 smartwatches"
* tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: s2mps11: Fix dw_mmc failure on Gear 2
Linus Torvalds [Mon, 29 Dec 2014 21:13:41 +0000 (13:13 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"First of all, the most important change is the thermal cpu cooling
fixes. The major fix here is to have proper sequencing between
cpufreq layer and thermal cpu cooling registration. A take away of
this fix is an improvement in the thermal drivers code. Thermal
drivers that require cpu cooling do not need to check for cpufreq
layer. The requirement now is to propagate the error code, if any,
while registering cpu cooling device. Thanks to Viresh for
implementing the required CPUfreq changes.
Second, a new driver is introduced for int340x processor thermal
device. Given that int340x thermal is disabled by default, and this
processor thermal device is only available on limited platforms, plus
the driver does nothing but exposes some thermal limitation
information for user space to use, thus I think it is safe to include
it in this pull request after missing 3.19-rc2.
- several small fixes and cleanups for int340x thermal drivers"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (43 commits)
Thermal/int340x/int3403: Free acpi notification handler
Thermal/int340x/processor_thermal: Fix memory leak
Thermal/int340x/int3403: Fix memory leak
thermal: int340x: Introduce processor reporting device
thermal: int340x_thermal: drop owner assignment from platform_drivers
thermal: drop owner assignment from platform_drivers
thermal: cpu_cooling: document node in struct cpufreq_cooling_device
thermal/powerclamp: add ids for future xeon cpus
Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing
thermal: cpu_cooling: return ERR_PTR() for !CPU_THERMAL or !THERMAL_OF
thermal: cpu_cooling: small memory leak on error
thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case
thermal: db8500: Do not print error message in the EPROBE_DEFER case
thermal: imx: Do not print error message in the EPROBE_DEFER case
thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung
thermal:core:fix: Check return code of the ->get_max_state() callback
thermal: cpu_cooling: update copyright tags
thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq
thermal: cpu_cooling: Store frequencies in descending order
...
Michal Hocko [Mon, 29 Dec 2014 19:30:35 +0000 (20:30 +0100)]
mm: get rid of radix tree gfp mask for pagecache_get_page
Commit 2457aec63745 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.
Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks. This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.
Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree. Just make
sure that the radix tree gets only the sane subset of the mask (e.g. do
not pass __GFP_WRITE).
Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.
Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmc: core: stop trying to switch width when only one bit is supported
mmc_select_bus_width() will try to switch to MMC_BUS_WIDTH_4 even if
MMC_CAP_4_BIT_DATA and MMC_CAP_8_BIT_DATA are not set in host->caps.
Return as soon as possible when those flags are not set
Linus Torvalds [Sun, 28 Dec 2014 21:08:08 +0000 (13:08 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The important fixes are for two bugs introduced by the merge window.
On top of this, add a couple of WARN_ONs and stop spamming dmesg on
pretty much every boot of a virtual machine"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: warn on more invariant breakage
kvm: fix sorting of memslots with base_gfn == 0
kvm: x86: drop severity of "generation wraparound" message
kvm: x86: vmx: reorder some msr writing
Paolo Bonzini [Sat, 27 Dec 2014 17:01:00 +0000 (18:01 +0100)]
kvm: fix sorting of memslots with base_gfn == 0
Before commit 0e60b0799fed (kvm: change memslot sorting rule from size
to GFN, 2014-12-01), the memslots' sorting key was npages, meaning
that a valid memslot couldn't have its sorting key equal to zero.
On the other hand, a valid memslot can have base_gfn == 0, and invalid
memslots are identified by base_gfn == npages == 0.
Because of this, commit 0e60b0799fed broke the invariant that invalid
memslots are at the end of the mslots array. When a memslot with
base_gfn == 0 was created, any invalid memslot before it were left
in place.
This can be fixed by changing the insertion to use a ">=" comparison
instead of "<=", but some care is needed to avoid breaking the case
of deleting a memslot; see the comment in update_memslots.
Thanks to Tiejun Chen for posting an initial patch for this bug.
Reported-by: Jamie Heilman <jamie@audible.transient.net> Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 27 Dec 2014 21:12:00 +0000 (13:12 -0800)]
Merge tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a couple of fixes for the new Intel Skylake HD-audio support"
* tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda_intel: apply the Seperate stream_tag for Skylake
ALSA: hda_controller: Separate stream_tag for input and output streams.
Tiejun Chen [Tue, 23 Dec 2014 08:21:11 +0000 (16:21 +0800)]
kvm: x86: vmx: reorder some msr writing
The commit 34a1cd60d17f, "x86: vmx: move some vmx setting from
vmx_init() to hardware_setup()", tried to refactor some codes
specific to vmx hardware setting into hardware_setup(), but some
msr writing should depend on our previous setting condition like
enable_apicv, enable_ept and so on.
Johannes Berg [Tue, 23 Dec 2014 20:00:06 +0000 (21:00 +0100)]
netlink/genetlink: pass network namespace to bind/unbind
Netlink families can exist in multiple namespaces, and for the most
part multicast subscriptions are per network namespace. Thus it only
makes sense to have bind/unbind notifications per network namespace.
To achieve this, pass the network namespace of a given client socket
to the bind/unbind functions.
Also do this in generic netlink, and there also make sure that any
bind for multicast groups that only exist in init_net is rejected.
This isn't really a problem if it is accepted since a client in a
different namespace will never receive any notifications from such
a group, but it can confuse the family if not rejected (it's also
possible to silently (without telling the family) accept it, but it
would also have to be ignored on unbind so families that take any
kind of action on bind/unbind won't do unnecessary work for invalid
clients like that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jia-Ju Bai [Tue, 23 Dec 2014 03:29:03 +0000 (11:29 +0800)]
ne2k-pci: Add pci_disable_device in error handling
For linux-3.18.0
The driver lacks pci_disable_device in error handling code of
ne2k_pci_init_one, so the device enabled by pci_enable_device is not
disabled when errors occur.
This patch fixes this problem.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wengang Wang [Tue, 23 Dec 2014 01:24:36 +0000 (09:24 +0800)]
bonding: change error message to debug message in __bond_release_one()
In __bond_release_one(), when the interface is not a slave or not a slave of
"this" master, it log error message.
The message actually should be a debug message matching what bond_enslave()
does.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
I'm looking at using the multicast group functionality in a way that would
benefit from knowing when there are subscribers to avoid collecting the
required data when there aren't any. During this I noticed that the unbind
for multicast groups doesn't actually work - it's never called when sockets
are closed. Luckily, nobody actually uses the functionality.
While looking at the code trying to find why it's not called and where the
multicast listeners are actually removed, I found the potential cleanup in
patch 3. Patch 2 also has a cleanup for a generic netlink API in this area.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 22 Dec 2014 17:56:38 +0000 (18:56 +0100)]
netlink: call unbind when releasing socket
Currently, netlink_unbind() is only called when the socket
explicitly unbinds, which limits its usefulness (luckily
there are no users of it yet anyway.)
Call netlink_unbind() also when a socket is released, so it
becomes possible to track listeners with this callback and
without also implementing a netlink notifier (and checking
netlink_has_listeners() in there.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 22 Dec 2014 17:56:37 +0000 (18:56 +0100)]
netlink: update listeners directly when removing socket
The code is now confusing to read - first in one function down
(netlink_remove) any group subscriptions are implicitly removed
by calling __sk_del_bind_node(), but the subscriber database is
only updated far later by calling netlink_update_listeners().
Move the latter call to just after removal from the list so it
is easier to follow the code.
This also enables moving the locking inside the kernel-socket
conditional, which improves the normal socket destruction path.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 22 Dec 2014 17:56:36 +0000 (18:56 +0100)]
genetlink: pass only network namespace to genl_has_listeners()
There's no point to force the caller to know about the internal
genl_sock to use inside struct net, just have them pass the network
namespace. This doesn't really change code generation since it's
an inline, but makes the caller less magic - there's never any
reason to pass another socket.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Sat, 27 Dec 2014 03:43:19 +0000 (22:43 -0500)]
[regression] braino in "lustre: use is_root_inode()"
In one of the places (ll_md_blocking_ast()) we had open-coded
!is_root_inode(inode) and replaced it with is_root_inode(inode).
See the last chunk of f76c23:
- inode != inode->i_sb->s_root->d_inode)
+ is_root_inode(inode))
should've been
+ !is_root_inode(inode))
obviously...
David S. Miller [Fri, 26 Dec 2014 23:08:38 +0000 (18:08 -0500)]
Merge tag 'wireless-drivers-for-davem-2014-12-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
o Paul made a Kconfig dependency fix to ipw2200, it was not possible to
enable that driver because Wireless Extensions is now disabled by default.
o Mika fixed brcmfmac not to crash when platform data is not populated
o Emmanuel provided few fixes to iwlwifi, he says:
"I have here new device IDs and a fix for double free bug I
introduced. I also fix an issue with the RFKILL interrupt - the HW
needs us to ACK the interrupt again after we reset it. Liad fixes an
issue with the firmware debugging infrastructure. While working on
torture scenarios of firmware restarts, Eliad found an issue which
he fixed."
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Gross [Wed, 24 Dec 2014 06:37:26 +0000 (22:37 -0800)]
net: Generalize ndo_gso_check to ndo_features_check
GSO isn't the only offload feature with restrictions that
potentially can't be expressed with the current features mechanism.
Checksum is another although it's a general issue that could in
theory apply to anything. Even if it may be possible to
implement these restrictions in other ways, it can result in
duplicate code or inefficient per-packet behavior.
This generalizes ndo_gso_check so that drivers can remove any
features that don't make sense for a given packet, similar to
netif_skb_features(). It also converts existing driver
restrictions to the new format, completing the work that was
done to support tunnel protocols since the issues apply to
checksums as well.
By actually removing features from the set that are used to do
offloading, it solves another problem with the existing
interface. In these cases, GSO would run with the original set
of features and not do anything because it appears that
segmentation is not required.
CC: Tom Herbert <therbert@google.com> CC: Joe Stringer <joestringer@nicira.com> CC: Eric Dumazet <edumazet@google.com> CC: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Tom Herbert <therbert@google.com> Fixes: 04ffcb255f22 ("net: Add ndo_gso_check") Tested-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Tue, 23 Dec 2014 16:50:37 +0000 (17:50 +0100)]
neigh: remove next ptr from struct neigh_table
After commit d7480fd3b173 ("neigh: remove dynamic neigh table registration support"),
this field is not used anymore.
CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 26 Dec 2014 21:41:05 +0000 (13:41 -0800)]
Merge branch 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc build fix from Helge Deller:
"This unbreaks the kernel compilation on parisc with gcc-4.9"
* 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix out-of-register compiler error in ldcw inline assembler function
Johan Hovold [Tue, 23 Dec 2014 11:59:17 +0000 (12:59 +0100)]
net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
Use generic config_init callback also for KSZ8021 and KSZ8031.
This has been avoided this far due to commit b838b4aced99 ("phy/micrel:
KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY
becomes unresponsive if the broadcast-disable flag is set before
configuring the clock mode.
Turns out that the problem seemingly worked-around by the above
mentioned commit was really due to a hardware-configuration issue, where
the PHY was in fact strapped to address 3 rather than 0.
Tested-by: Bruno Thomsen <bth@kamstrup.dk> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
When VXLAN encapsulated traffic is received from a similarly
configured peer, the above warning is generated in the receive
processing of the encapsulated packet. Note that the warning is
associated with the container eth0.
The skbs from sky2 have ip_summed set to CHECKSUM_COMPLETE, and
because the packet is an encapsulated Ethernet frame, the checksum
generated by the hardware includes the inner protocol and Ethernet
headers.
The receive code is careful to update the skb->csum, except in
__dev_forward_skb, as called by dev_forward_skb. __dev_forward_skb
calls eth_type_trans, which in turn calls skb_pull_inline(skb, ETH_HLEN)
to skip over the Ethernet header, but does not update skb->csum when
doing so.
This patch resolves the problem by adding a call to
skb_postpull_rcsum to update the skb->csum after the call to
eth_type_trans.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
parisc: fix out-of-register compiler error in ldcw inline assembler function
The __ldcw macro has a problem when its argument needs to be reloaded from
memory. The output memory operand and the input register operand both need to
be reloaded using a register in class R1_REGS when generating 64-bit code.
This fails because there's only a single register in the class. Instead, use a
memory clobber. This also makes the __ldcw macro a compiler memory barrier.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Helge Deller <deller@gmx.de>
Libin Yang [Fri, 19 Dec 2014 00:44:31 +0000 (08:44 +0800)]
ALSA: hda_intel: apply the Seperate stream_tag for Skylake
The total stream number of Skylake's input and output stream
exceeds 15, which will cause some streams do not work because
of the overflow on SDxCTL.STRM field if using the legacy
stream tag allocation method.
This patch uses the new stream tag allocation method by add
the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform.
Rafal Redzimski [Fri, 19 Dec 2014 00:44:30 +0000 (08:44 +0800)]
ALSA: hda_controller: Separate stream_tag for input and output streams.
Implemented separate stream_tag assignment for input and output streams.
According to hda specification stream tag must be unique throughout the
input streams group, however an output stream might use a stream tag
which is already in use by an input stream. This change is necessary
to support HW which provides a total of more than 15 stream DMA engines
which with legacy implementation causes an overflow on SDxCTL.STRM
field (and the whole SDxCTL register) and as a result usage of
Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller.
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 26 Dec 2014 00:04:15 +0000 (16:04 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Xmas fixes pull:
core:
one atomic fix, revert the WARN_ON dumb buffers patch.
agp:
fixup Dave J.
nouveau:
fix 3.18 regression for old userspace
tegra fixes:
vblank and iommu fixes
amdkfd:
fix bugs shown by testing with userspace, init apertures once
msm:
hdmi fixes and cleanup
i915:
misc fixes
There is also a link ordering fix that I've asked to be cc'ed to you,
putting iommu before gpu, it fixes an issue with amdkfd when things
are all in the kernel, but I didn't like sending it via my tree
without discussion.
I'll probably be a bit on/off for a few weeks with pulls now, due to
holidays and LCA, so don't be surprised if stuff gets a bit backed up,
and things end up a bit large due to lag"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits)
Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2"
agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags
nouveau: bring back legacy mmap handler
drm/msm/hdmi: rework HDMI IRQ handler
drm/msm/hdmi: enable regulators before clocks to avoid warnings
drm/msm/mdp5: update irqs on crtc<->encoder link change
drm/msm: block incoming update on pending updates
drm/atomic: fix potential null ptr on plane enable
drm/msm: Deletion of unnecessary checks before the function call "release_firmware"
drm/msm: Deletion of unnecessary checks before two function calls
drm/tegra: dc: Select root window for event dispatch
drm/tegra: gem: Use the proper size for GEM objects
drm/tegra: gem: Flush buffer objects upon allocation
drm/tegra: dc: Fix a potential race on page-flip completion
drm/tegra: dc: Consistently use the same pipe
drm/irq: Add drm_crtc_vblank_count()
drm/irq: Add drm_crtc_handle_vblank()
drm/irq: Add drm_crtc_send_vblank_event()
drm/i915: Disable PSMI sleep messages on all rings around context switches
drm/i915: Force the CS stall for invalidate flushes
...
Linus Torvalds [Thu, 25 Dec 2014 23:56:34 +0000 (15:56 -0800)]
Merge tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull ipmi driver bugfixes from Corey Minyard:
"Fix two bugs:
One that lockdep turned up, I didn't go far enough with cleanup of
attributes for IPMI. This has been there a long time; my previous fix
of this didn't fix all the attributes.
One fix for some arches that need an explicit linux/ctype.h for
isspace()"
* tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Fix compile issue with isspace()
ipmi: Finish cleanup of BMC attributes
CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg [Wed, 24 Dec 2014 18:43:11 +0000 (20:43 +0200)]
Bluetooth: Fix accepting connections when not using mgmt
When connectable mode is enabled (page scan on) through some non-mgmt
method the HCI_CONNECTABLE flag will not be set. For backwards
compatibility with user space versions not using mgmt we should not
require HCI_CONNECTABLE to be set if HCI_MGMT is not set.
Marcel Holtmann [Tue, 23 Dec 2014 22:10:48 +0000 (23:10 +0100)]
Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
When controllers set the HCI_QUIRK_INVALID_BDADDR flag, it is required
by userspace to program a valid public Bluetooth device address into
the controller before it can be used.
After successful address configuration, the internal state changes and
the controller runs the complete initialization procedure. However one
small difference is that this is no longer the HCI_SETUP stage. The
HCI_SETUP stage is only valid during initial controller setup. In this
case the stack runs the initialization as part of the HCI_CONFIG stage.
The controller version information, default name and supported commands
are only stored during HCI_SETUP. While these information are static,
they are not read initially when HCI_QUIRK_INVALID_BDADDR is set. So
when running in HCI_CONFIG state, these information need to be updated
as well.
This especially impacts Bluetooth 4.1 and later controllers using
extended feature pages and second event mask page.
Mika Westerberg [Tue, 23 Dec 2014 14:48:32 +0000 (16:48 +0200)]
brcmfmac: Do not crash if platform data is not populated
The driver looks for pdata->oob_irq_supported to find out if wowl can be
supported. However, not all platforms populate pdata in which case we crash
the kernel because of NULL pointer dereference.
Fixes: 330b4e4be937 ("brcmfmac: Add wowl support for SDIO devices.") Reported-by: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Paul Bolle [Mon, 22 Dec 2014 18:10:17 +0000 (19:10 +0100)]
ipw2200: select CFG80211_WEXT
Commit 24a0aa212ee2 ("cfg80211: make WEXT compatibility unselectable")
made it impossible to depend on CFG80211_WEXT. It does still allow to
select that symbol. (Yes, the commit summary is confusing.)
So make IPW2200 select CFG80211_WEXT, so that the ipw2200 driver can be
enabled in config again.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
A 1-byte burst size is rather inefficient and has been shown to cause
TX issues during testing. Increase the DMA burst size to 4-bytes for
both RX and TX DMA when using the 8-bit FIFO.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Toshiaki Makita [Mon, 22 Dec 2014 10:04:14 +0000 (19:04 +0900)]
net: Fix stacked vlan offload features computation
When vlan tags are stacked, it is very likely that the outer tag is stored
in skb->vlan_tci and skb->protocol shows the inner tag's vlan_proto.
Currently netif_skb_features() first looks at skb->protocol even if there
is the outer tag in vlan_tci, thus it incorrectly retrieves the protocol
encapsulated by the inner vlan instead of the inner vlan protocol.
This allows GSO packets to be passed to HW and they end up being
corrupted.
Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar [Wed, 24 Dec 2014 00:20:32 +0000 (16:20 -0800)]
openvswitch: Fix vport_send double free
Today vport-send has complex error handling because it involves
freeing skb and updating stats depending on return value from
vport send implementation.
This can be simplified by delegating responsibility of freeing
skb to the vport implementation for all cases. So that
vport-send needs just update stats.
Fixes: 91b7514cdf ("openvswitch: Unify vport error stats
handling") Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar [Wed, 24 Dec 2014 00:20:20 +0000 (16:20 -0800)]
openvswitch: Fix MPLS action validation.
Linux stack does not implement GSO for packet with multiple
encapsulations. Therefore there was check in MPLS action
validation to detect such case, But this check introduced
bug which deleted one or more actions from actions list.
Following patch removes this check to fix the validation.
Fixes: 25cd9ba0abc ("openvswitch: Add basic MPLS support to
kernel").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reported-by: Srinivas Neginhal <sneginha@vmware.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar [Wed, 24 Dec 2014 00:20:16 +0000 (16:20 -0800)]
mpls: Fix allowed protocols for mpls gso
MPLS and Tunnel GSO does not work together. Reject packet which
request such GSO.
Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar [Wed, 24 Dec 2014 00:20:11 +0000 (16:20 -0800)]
mpls: Fix config check for mpls.
Fixes MPLS GSO for case when mpls is compiled as kernel module.
Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sat, 20 Dec 2014 20:16:24 +0000 (07:16 +1100)]
net: Always poll at least one device in net_rx_action
We should only perform the softnet_break check after we have polled
at least one device in net_rx_action. Otherwise a zero or negative
setting of netdev_budget can lock up the whole system.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Sat, 20 Dec 2014 20:16:22 +0000 (07:16 +1100)]
net: Detect drivers that reschedule NAPI and exhaust budget
The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less
interrupt masking in NAPI) required drivers to leave poll_list
empty if the entire budget is consumed.
We have already had two broken drivers so let's add a check for
this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
batman-adv: avoid NULL dereferences and fix if check
Gateway having bandwidth_down equal to zero are not accepted
at all and so never added to the Gateway list.
For this reason checking the bandwidth_down member in
batadv_gw_out_of_range() is useless.
This is probably a copy/paste error and this check was supposed
to be "!gw_node" only. Moreover, the way the check is written
now may also lead to a NULL dereference.
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Sat, 20 Dec 2014 12:48:56 +0000 (13:48 +0100)]
batman-adv: Unify fragment size calculation
The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605
("batman-adv: Receive fragmented packets and merge") by an implementation which
can handle up to 16 fragments of a packet. The packet is prepared for the split
in fragments by the function batadv_frag_send_packet and the actual split is
done by batadv_frag_create.
Both functions calculate the size of a fragment themself. But their calculation
differs because batadv_frag_send_packet also subtracts ETH_HLEN. Therefore,
the check in batadv_frag_send_packet "can a full fragment can be created?" may
return true even when batadv_frag_create cannot create a full fragment.
The function batadv_frag_create doesn't check the size of the skb before
splitting it and therefore might try to create a larger fragment than the
remaining buffer. This creates an integer underflow and an invalid len is given
to skb_split.
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Sat, 20 Dec 2014 12:48:55 +0000 (13:48 +0100)]
batman-adv: Calculate extra tail size based on queued fragments
The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605
("batman-adv: Receive fragmented packets and merge"). The new code provided a
mostly unused parameter skb for the merging function. It is used inside the
function to calculate the additionally needed skb tailroom. But instead of
increasing its own tailroom, it is only increasing the tailroom of the first
queued skb. This is not correct in some situations because the first queued
entry can be a different one than the parameter.
An observed problem was:
1. packet with size 104, total_size 1464, fragno 1 was received
- packet is queued
2. packet with size 1400, total_size 1464, fragno 0 was received
- packet is queued at the end of the list
3. enough data was received and can be given to the merge function
(1464 == (1400 - 20) + (104 - 20))
- merge functions gets 1400 byte large packet as skb argument
4. merge function gets first entry in queue (104 byte)
- stored as skb_out
5. merge function calculates the required extra tail as total_size - skb->len
- pskb_expand_head tail of skb_out with 64 bytes
6. merge function tries to squeeze the extra 1380 bytes from the second queued
skb (1400 byte aka skb parameter) in the 64 extra tail bytes of skb_out
Instead calculate the extra required tail bytes for skb_out also using skb_out
instead of using the parameter skb. The skb parameter is only used to get the
total_size from the last received packet. This is also the total_size used to
decide that all fragments were received.
Reported-by: Philipp Psurek <philipp.psurek@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 19 Dec 2014 03:09:13 +0000 (11:09 +0800)]
net: drop the packet when fails to do software segmentation or header check
Commit cecda693a969816bac5e470e1d9c9c0ef5567bca ("net: keep original skb
which only needs header checking during software GSO") keeps the original
skb for packets that only needs header check, but it doesn't drop the
packet if software segmentation or header check were failed.
Fixes cecda693a9 ("net: keep original skb which only needs header checking during software GSO") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Wed, 24 Dec 2014 02:59:08 +0000 (12:59 +1000)]
Merge tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Display MEC fw version in topology. Without this, the HSA userspace
stack is broken.
- Init apertures information only once per process
* tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: init aperture once per process
amdkfd: Display MEC fw version in topology node
drm/radeon: Add implementation of get_fw_version
drm/amd: Add get_fw_version to kfd-->kgd interface
projects / mirror_ubuntu-eoan-kernel.git / log