Export the IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0 to guests on TSX
Async Abort(TAA) affected hosts that have TSX enabled and updated
microcode. This is required so that the guests don't complain,
"Vulnerable: Clear CPU buffers attempted, no microcode"
when the host has the updated microcode to clear CPU buffers.
Microcode update also adds support for MSR_IA32_TSX_CTRL which is
enumerated by the ARCH_CAP_TSX_CTRL bit in IA32_ARCH_CAPABILITIES MSR.
Guests can't do this check themselves when the ARCH_CAP_TSX_CTRL bit is
not exported to the guests.
In this case export MDS_NO=0 to the guests. When guests have
CPUID.MD_CLEAR=1, they deploy MDS mitigation which also mitigates TAA.
Add the sysfs reporting file for TSX Async Abort. It exposes the
vulnerability and the mitigation state similar to the existing files for
the other hardware vulnerabilities.
Sysfs file path is:
/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
TSX Async Abort (TAA) is a side channel vulnerability to the internal
buffers in some Intel processors similar to Microachitectural Data
Sampling (MDS). In this case, certain loads may speculatively pass
invalid data to dependent operations when an asynchronous abort
condition is pending in a TSX transaction.
This includes loads with no fault or assist condition. Such loads may
speculatively expose stale data from the uarch data structures as in
MDS. Scope of exposure is within the same-thread and cross-thread. This
issue affects all current processors that support TSX, but do not have
ARCH_CAP_TAA_NO (bit 8) set in MSR_IA32_ARCH_CAPABILITIES.
On CPUs which have their IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0,
CPUID.MD_CLEAR=1 and the MDS mitigation is clearing the CPU buffers
using VERW or L1D_FLUSH, there is no additional mitigation needed for
TAA. On affected CPUs with MDS_NO=1 this issue can be mitigated by
disabling the Transactional Synchronization Extensions (TSX) feature.
A new MSR IA32_TSX_CTRL in future and current processors after a
microcode update can be used to control the TSX feature. There are two
bits in that MSR:
* TSX_CTRL_RTM_DISABLE disables the TSX sub-feature Restricted
Transactional Memory (RTM).
* TSX_CTRL_CPUID_CLEAR clears the RTM enumeration in CPUID. The other
TSX sub-feature, Hardware Lock Elision (HLE), is unconditionally
disabled with updated microcode but still enumerated as present by
CPUID(EAX=7).EBX{bit4}.
The second mitigation approach is similar to MDS which is clearing the
affected CPU buffers on return to user space and when entering a guest.
Relevant microcode update is required for the mitigation to work. More
details on this approach can be found here:
The TSX feature can be controlled by the "tsx" command line parameter.
If it is force-enabled then "Clear CPU buffers" (MDS mitigation) is
deployed. The effective mitigation state can be read from sysfs.
Add a kernel cmdline parameter "tsx" to control the Transactional
Synchronization Extensions (TSX) feature. On CPUs that support TSX
control, use "tsx=on|off" to enable or disable TSX. Not specifying this
option is equivalent to "tsx=off". This is because on certain processors
TSX may be used as a part of a speculative side channel attack.
Carve out the TSX controlling functionality into a separate compilation
unit because TSX is a CPU feature while the TSX async abort control
machinery will go to cpu/bugs.c.
[ bp: - Massage, shorten and clear the arg buffer.
- Clarifications of the tsx= possible options - Josh.
- Expand on TSX_CTRL availability - Pawan. ]
Transactional Synchronization Extensions (TSX) may be used on certain
processors as part of a speculative side channel attack. A microcode
update for existing processors that are vulnerable to this attack will
add a new MSR - IA32_TSX_CTRL to allow the system administrator the
option to disable TSX as one of the possible mitigations.
The CPUs which get this new MSR after a microcode upgrade are the ones
which do not set MSR_IA32_ARCH_CAPABILITIES.MDS_NO (bit 5) because those
CPUs have CPUID.MD_CLEAR, i.e., the VERW implementation which clears all
CPU buffers takes care of the TAA case as well.
[ Note that future processors that are not vulnerable will also
support the IA32_TSX_CTRL MSR. ]
Add defines for the new IA32_TSX_CTRL MSR and its bits.
TSX has two sub-features:
1. Restricted Transactional Memory (RTM) is an explicitly-used feature
where new instructions begin and end TSX transactions.
2. Hardware Lock Elision (HLE) is implicitly used when certain kinds of
"old" style locks are used by software.
Bit 7 of the IA32_ARCH_CAPABILITIES indicates the presence of the
IA32_TSX_CTRL MSR.
There are two control bits in IA32_TSX_CTRL MSR:
Bit 0: When set, it disables the Restricted Transactional Memory (RTM)
sub-feature of TSX (will force all transactions to abort on the
XBEGIN instruction).
Bit 1: When set, it disables the enumeration of the RTM and HLE feature
(i.e. it will make CPUID(EAX=7).EBX{bit4} and
CPUID(EAX=7).EBX{bit11} read as 0).
The other TSX sub-feature, Hardware Lock Elision (HLE), is
unconditionally disabled by the new microcode but still enumerated
as present by CPUID(EAX=7).EBX{bit4}, unless disabled by
IA32_TSX_CTRL_MSR[1] - TSX_CTRL_CPUID_CLEAR.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
CVE-2019-11135
Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Imre Deak [Mon, 9 Jul 2018 15:24:27 +0000 (18:24 +0300)]
UBUNTU: SAUCE: drm/i915/gen8+: Add RC6 CTX corruption WA
CVE-2019-0154
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[tyhicks: Backport to 5.3
- Minor context changes] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com>
Uma Shankar [Tue, 7 Aug 2018 15:45:35 +0000 (21:15 +0530)]
UBUNTU: SAUCE: drm/i915: Lower RM timeout to avoid DSI hard hangs
CVE-2019-0154
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL
to be turned ON. When MIPI PLL is turned off (MIPI Display is not
active or connected), and someone (host or GT engine) tries to read
MIPI registers, it causes hard hang. This is a hardware restriction
or limitation.
Driver by itself doesn't read MIPI registers when MIPI display is off.
But any userspace application can submit unprivileged batch buffer for
execution. In that batch buffer there can be mmio reads. And these
reads are allowed even for unprivileged applications. If these
register reads are for MIPI DSI controller and MIPI display is not
active during that time, then the MMIO read operation causes system
hard hang and only way to recover is hard reboot. A genuine
process/application won't submit batch buffer like this and doesn't
cause any issue. But on a compromised system, a malign userspace
process/app can generate such batch buffer and can trigger system
hard hang (denial of service attack).
The fix is to lower the internal MMIO timeout value to an optimum
value of 950us as recommended by hardware team. If the timeout is
beyond 1ms (which will hit for any value we choose if MMIO READ on a
DSI specific register is performed without PLL ON), it causes the
system hang. But if the timeout value is lower than it will be below
the threshold (even if timeout happens) and system will not get into
a hung state. This will avoid a system hang without losing any
programming or GT interrupts, taking the worst case of lowest CDCLK
frequency and early DC5 abort into account.
Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
[tyhicks: Backport to 5.3
- Minor context adjustment in i915_reg.h] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Thu, 20 Sep 2018 16:45:10 +0000 (09:45 -0700)]
UBUNTU: SAUCE: drm/i915/cmdparser: Ignore Length operands during command matching
CVE-2019-0155
Some of the gen instruction macros (e.g. MI_DISPLAY_FLIP) have the
length directly encoded in them. Since these are used directly in
the tables, the Length becomes part of the comparison used for
matching during parsing. Thus, if the cmd being parsed has a
different length to that in the table, it is not matched and the
cmd is accepted via the default variable length path.
Fix by masking out everything except the Opcode in the cmd tables
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Thu, 20 Sep 2018 16:58:36 +0000 (09:58 -0700)]
UBUNTU: SAUCE: drm/i915/cmdparser: Add support for backward jumps
CVE-2019-0155
To keep things manageable, the pre-gen9 cmdparser does not
attempt to track any form of nested BB_START's. This did not
prevent usermode from using nested starts, or even chained
batches because the cmdparser is not strictly enforced pre gen9.
Instead, the existence of a nested BB_START would cause the batch
to be emitted in insecure mode, and any privileged capabilities
would not be available.
For Gen9, the cmdparser becomes mandatory (for BCS at least), and
so not providing any form of nested BB_START support becomes
overly restrictive. Any such batch will simply not run.
We make heavy use of backward jumps in igt, and it is much easier
to add support for this restricted subset of nested jumps, than to
rewrite the whole of our test suite to avoid them.
Add the required logic to support limited backward jumps, to
instructions that have already been validated by the parser.
Note that it's not sufficient to simply approve any BB_START
that jumps backwards in the buffer because this would allow an
attacker to embed a rogue instruction sequence within the
operand words of a harmless instruction (say LRI) and jump to
that.
We introduce a bit array to track every instr offset successfully
validated, and test the target of BB_START against this. If the
target offset hits, it is re-written to the same offset in the
shadow buffer and the BB_START cmd is allowed.
Note: This patch deliberately ignores checkpatch issues in the
cmdtables, in order to match the style of the surrounding code.
We'll correct the entire file in one go in a later patch.
v2: set dispatch secure late (Mika)
v3: rebase (Mika)
v4: Clear whitelist on each parse
Minor review updates (Chris)
v5: Correct backward jump batching
v6: fix compilation error due to struct eb shuffle (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[tyhicks: Backport to 5.3
- Minor context adjustment in i915_gem_context_free()
- Adjust for different parameters, stack variables, and jump labels in
eb_parse()] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Thu, 27 Sep 2018 17:23:17 +0000 (10:23 -0700)]
UBUNTU: SAUCE: drm/i915/cmdparser: Use explicit goto for error paths
CVE-2019-0155
In the next patch we will be adding a second valid
termination condition which will require a small
amount of refactoring to share logic with the BB_END
case.
Refactor all error conditions to jump to a dedicated
exit path, with 'break' reserved only for a successful
parse.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Mon, 23 Apr 2018 18:12:15 +0000 (11:12 -0700)]
UBUNTU: SAUCE: drm/i915: Add gen9 BCS cmdparsing
CVE-2019-0155
For gen9 we enable cmdparsing on the BCS ring, specifically
to catch inadvertent accesses to sensitive registers
Unlike gen7/hsw, we use the parser only to block certain
registers. We can rely on h/w to block restricted commands,
so the command tables only provide enough info to allow the
parser to delineate each command, and identify commands that
access registers.
Note: This patch deliberately ignores checkpatch issues in
favour of matching the style of the surrounding code. We'll
correct the entire file in one go in a later patch.
v3: rebase (Mika)
v4: Add RING_TIMESTAMP registers to whitelist (Jon)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Wed, 1 Aug 2018 16:45:50 +0000 (09:45 -0700)]
UBUNTU: SAUCE: drm/i915: Allow parsing of unsized batches
CVE-2019-0155
In "drm/i915: Add support for mandatory cmdparsing" we introduced the
concept of mandatory parsing. This allows the cmdparser to be invoked
even when user passes batch_len=0 to the execbuf ioctl's.
However, the cmdparser needs to know the extents of the buffer being
scanned. Refactor the code to ensure the cmdparser uses the actual
object size, instead of the incoming length, if user passes 0.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Tue, 22 May 2018 20:59:06 +0000 (13:59 -0700)]
UBUNTU: SAUCE: drm/i915: Support ro ppgtt mapped cmdparser shadow buffers
CVE-2019-0155
For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.
For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.
Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.
Add the required paths to map the shadow buffer to ppgtt ro for Gen8+
v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[tyhicks: Backport to 5.3
- Adjust for different parameters, stack variables, and jump labels in
eb_parse()] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Wed, 1 Aug 2018 16:33:59 +0000 (09:33 -0700)]
UBUNTU: SAUCE: drm/i915: Add support for mandatory cmdparsing
CVE-2019-0155
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.
In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.
Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.
v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[tyhicks: Backport to 5.3
- Adjust flags list due to missing I915_ENGINE_HAS_RELATIVE_MMIO flag
- Adjust context in for loop in i915_cmd_parser_get_version()] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Fri, 8 Jun 2018 17:05:26 +0000 (10:05 -0700)]
UBUNTU: SAUCE: drm/i915: Remove Master tables from cmdparser
CVE-2019-0155
The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
[tyhicks: Backport to 5.3
- Adjust for different parameters and stack variables in eb_parse] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Jon Bloomfield [Fri, 8 Jun 2018 15:53:46 +0000 (08:53 -0700)]
UBUNTU: SAUCE: drm/i915: Disable Secure Batches for gen6+
CVE-2019-0155
Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.
Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.
Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.
v2: rebase (Mika)
v3: rebase (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
[tyhicks: Backport to 5.3
- i915_getparam_ioctl() is in 915_drv.c] Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Seth Forshee [Tue, 29 Oct 2019 19:25:13 +0000 (14:25 -0500)]
UBUNTU: [Packaging] Leave unsigned modules unsigned after adding .gnu_debuglink
BugLink: https://bugs.launchpad.net/bugs/1850234
When adding .gnu_debuglink sections to modules we sign modules
without regard to whether or not they were signed previously. As
a result modules from staging which should not have been signed
are ending up with signature. Change this to check for a module
signature before modifying the binary, then sign the result only
if the original module was signed.
Hui Wang [Thu, 17 Oct 2019 12:28:00 +0000 (14:28 +0200)]
UBUNTU: [Config] Enable SOF_HDA link and codec
BugLink: https://bugs.launchpad.net/bugs/1848490
The Eoan kernel already has alsa/sof driver, we need to enable SOF_HDA
link and codec, otherwise the dmic can't work on the Dell and Lenovo
machines which have the dmic directly connected to PCH.
Because the SOF_HDA depneds on the NOCODEC=n, we need to disable
SOF_NOCODEC.
Signed-off-by: Hui Wang <hui.wang@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
[ klebers:
- adjusted configs after running 'updateconfigs'
- updated the annotations file
- removed 'snd-sof-nocodec' from previous ABI module list. ] Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Connor Kuehl [Mon, 21 Oct 2019 18:53:28 +0000 (11:53 -0700)]
UBUNTU: [Packaging] Remove now un-used modules for amd64
BugLink: https://bugs.launchpad.net/bugs/1848750
Ubuntu commit 5ea50223b4ea ("staging/fbtft: Depend on OF") updates a
config option to depend on OF which is not set on amd64. As a result,
these modules are precluded now.
As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose
and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint
of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf.
Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix
this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0.
This hasn't had any implications so far because setting reserved bits in
EAX is simply ignored by the CPU.
[ bp: Fixup comment in delay_mwaitx() and massage. ]
Commit 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to
chip->read_xxx() hooks") modified the prototype of the struct nand_chip
read_buf function pointer. In the au1550nd driver we have 2
implementations of read_buf. The previously mentioned commit modified
the au_read_buf() implementation to match the function pointer, but not
au_read_buf16(). This results in a compiler warning for MIPS
db1xxx_defconfig builds:
drivers/mtd/nand/raw/au1550nd.c:443:57:
warning: pointer type mismatch in conditional expression
Fix this by updating the prototype of au_read_buf16() to take a struct
nand_chip pointer as its first argument, as is expected after commit 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx()
hooks").
Note that this shouldn't have caused any functional issues at runtime,
since the offset of the struct mtd_info within struct nand_chip is 0
making mtd_to_nand() effectively a type-cast.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 7e534323c416 ("mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooks") Cc: stable@vger.kernel.org # v4.20+ Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.
Cc: stable@vger.kernel.org Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for
an instance now. They need to take a reference to the instance otherwise
there could be a race between accessing the files and deleting the instance.
It wasn't until the :mod: caching where these file operations started
referencing the trace_array directly.
max_latency is intended to record the maximum ever observed hardware
latency, which may occur in either part of the loop (inner/outer). So
we need to also consider the outer-loop sample when updating
max_latency.
nmi_total_ts is supposed to record the total time spent in *all* NMIs
that occur on the given CPU during the (active portion of the)
sampling window. However, the code seems to be overwriting this
variable for each NMI, thereby only recording the time spent in the
most recent NMI. Fix it by accumulating the duration instead.
The system which has SVE feature crashed because of
the memory pointed by task->thread.sve_state was destroyed
by someone.
That is because sve_state is freed while the forking the
child process. The child process has the pointer of sve_state
which is same as the parent's because the child's task_struct
is copied from the parent's one. If the copy_process()
fails as an error on somewhere, for example, copy_creds(),
then the sve_state is freed even if the parent is alive.
The flow is as follows.
Move child's sve_state = NULL and clearing TIF_SVE flag
to arch_dup_task_struct() so that the child doesn't free the
parent's one.
There is no need to wait until copy_process() to clear TIF_SVE for
dst, because the thread flags for dst are initialized already by
copying the src task_struct.
This change simplifies the code, so get rid of comments that are no
longer needed.
As a note, arm64 used to have thread_info on the stack. So it
would not be possible to clear TIF_SVE until the stack is initialized.
From commit c02433dd6de3 ("arm64: split thread_info from task stack"),
the thread_info is part of the task, so it should be valid to modify
the flag from arch_dup_task_struct().
Cc: stable@vger.kernel.org # 4.15.x- Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reported-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Suggested-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate
interface PM usage counter") USB drivers must always balance their
runtime PM gets and puts, including when the driver has already been
unbound from the interface.
Leaving the interface with a positive PM usage counter would prevent a
later bound driver from suspending the device.
Note that runtime PM has never actually been enabled for this driver
since the support_autosuspend flag in its usb_driver struct is not set.
Since dropping the set-to-gtt-domain in commit a679f58d0510 ("drm/i915:
Flush pages on acquisition"), we no longer mark the contents as dirty on
a write fault. This has the issue of us then not marking the pages as
dirty on releasing the buffer, which means the contents are not written
out to the swap device (should we ever pick that buffer as a victim).
Notably, this is visible in the dumb buffer interface used for cursors.
Having updated the cursor contents via mmap, and swapped away, if the
shrinker should evict the old cursor, upon next reuse, the cursor would
be invisible.
E.g. echo 80 > /proc/sys/kernel/sysrq ; echo f > /proc/sysrq-trigger
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111541 Fixes: a679f58d0510 ("drm/i915: Flush pages on acquisition") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190920121821.7223-1-chris@chris-wilson.co.uk
(cherry picked from commit 5028851cdfdf78dc22eacbc44a0ab0b3f599ee4a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
This allows userspace to use "legacy" mode for push constants, where
they are committed at 3DPRIMITIVE or flush time, rather than being
committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time. Gen6-8 and Gen11
both use the "legacy" behavior - only Gen9 works in the "new" way.
Conflating push constants with binding tables is painful for userspace,
we would like to be able to avoid doing so.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org
(cherry picked from commit 0606259e3b3a1220a0f04a92a1654a3f674f47ee) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The officially validated plane width limit is 4k on skl+, however
we already had people using 5k displays before we started to enforce
the limit. Also it seems Windows allows 5k resolutions as well
(though not sure if they do it with one plane or two).
According to hw folks 5k should work with the possible
exception of the following features:
- Ytile (already limited to 4k)
- FP16 (already limited to 4k)
- render compression (already limited to 4k)
- KVMR sprite and cursor (don't care)
- horizontal panning (need to verify this)
- pipe and plane scaling (need to verify this)
So apart from last two items on that list we are already
fine. We should really verify what happens with those last
two items but I don't have a 5k display on hand atm so it'll
have to wait.
In the meantime let's just bump the limit back up to 5k since
several users have already been using it without apparent issues.
At least we'll be no worse off than we were prior to lowering
the limits.
Cc: stable@vger.kernel.org Cc: Sean Paul <sean@poorly.run> Cc: José Roberto de Souza <jose.souza@intel.com> Tested-by: Leho Kraav <leho@kraav.com> Fixes: 372b9ffb5799 ("drm/i915: Fix skl+ max plane width")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Sean Paul <sean@poorly.run>
(cherry picked from commit bed34ef544f9ab37ab349c04cf4142282c4dcf5d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There are two problems in dcache_readdir() - one is that lockless traversal
of the list needs non-trivial cooperation of d_alloc() (at least a switch
to list_add_rcu(), and probably more than just that) and another is that
it assumes that no removal will happen without the directory locked exclusive.
Said assumption had always been there, never had been stated explicitly and
is violated by several places in the kernel (devpts and selinuxfs).
* replacement of next_positive() with different calling conventions:
it returns struct list_head * instead of struct dentry *; the latter is
passed in and out by reference, grabbing the result and dropping the original
value.
* scan is under ->d_lock. If we run out of timeslice, cursor is moved
after the last position we'd reached and we reschedule; then the scan continues
from that place. To avoid livelocks between multiple lseek() (with cursors
getting moved past each other, never reaching the real entries) we always
skip the cursors, need_resched() or not.
* returned list_head * is either ->d_child of dentry we'd found or
->d_subdirs of parent (if we got to the end of the list).
* dcache_readdir() and dcache_dir_lseek() switched to new helper.
dcache_readdir() always holds a reference to dentry passed to dir_emit() now.
Cursor is moved to just before the entry where dir_emit() has failed or into
the very end of the list, if we'd run out.
* move_cursor() eliminated - it had sucky calling conventions and
after fixing that it became simply list_move() (in lseek and scan_positives)
or list_move_tail() (in readdir).
All operations with the list are under ->d_lock now, and we do not
depend upon having all file removals done with parent locked exclusive
anymore.
Since commit ebd457d55911 ("iio: light: vcnl4000 add devicetree hooks")
the of_match_table is supported but the data shouldn't be a string.
Instead it shall be one of 'enum vcnl4000_device_ids'. Also the matching
logic for the vcnl4020 was wrong. Since the data retrieve mechanism is
still based on the i2c_device_id no failures did appeared till now.
ACPI 6.3 adds a thread flag to represent if a CPU/PE is
actually a thread. Given that the MPIDR_MT bit may not
represent this information consistently on homogeneous machines
we should prefer the PPTT flag if its available.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Robert Richter <rrichter@marvell.com>
[will: made acpi_cpu_is_threaded() return 'bool'] Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
ACPI 6.3 adds a flag to the CPU node to indicate whether
the given PE is a thread. Add a function to return that
information for a given linux logical CPU.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Robert Richter <rrichter@marvell.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.
Thus we export the ASEs that can be used in userspace programs.
GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:
cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’
The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.
Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When a series of O_DIRECT reads or writes are truncated, either due to
eof or due to an error, then we should return the number of contiguous
bytes that were received/sent starting at the offset specified by the
application.
Currently, we are failing to correctly check contiguity, and so we're
failing the generic/465 in xfstests when the race between the read
and write RPCs causes the file to get extended while the 2 reads are
outstanding. If the first read RPC call wins the race and returns with
eof set, we should treat the second read RPC as being truncated.
Reported-by: Su Yanjun <suyj.fnst@cn.fujitsu.com> Fixes: 1ccbad9f9f9bd ("nfs: fix DIO good bytes calculation") Cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf. This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror. Fix this by initializing ret to 0.
Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Chris Mason <clm@fb.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.
Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.
The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.
CPU 1 CPU 2
extent_fiemap()
--> it's a full ranged fiemap
range from 0 to LLONG_MAX - 1
(9223372036854775807)
--> locks range in the inode's
io tree
--> after this we have 2 extent
states in the io tree:
--> 1 for range [0, 1Mb[ with
the bits EXTENT_LOCKED and
EXTENT_DELALLOC_BITS set
--> 1 for the range
[1Mb, LLONG_MAX[ with
the EXTENT_LOCKED bit set
--> start buffered write at offset
1Mb with a length of 4Kb
btrfs_file_write_iter()
btrfs_buffered_write()
--> cached_state is NULL
lock_and_cleanup_extent_if_need()
--> returns 0 and does not lock
range because it starts
at current i_size / eof
--> splits extent state for range
[1Mb, LLONG_MAX[ and now we
have 2 extent states:
--> one for the range
[1Mb, 1Mb + 4Kb[ with
EXTENT_LOCKED set
--> another one for the range
[1Mb + 4Kb, LLONG_MAX[ with
EXTENT_LOCKED set as well
--> sets EXTENT_DELALLOC on the
extent state for the range
[1Mb, 1Mb + 4Kb[
--> caches extent state
[1Mb, 1Mb + 4Kb[ into
@cached_state because it has
the bit EXTENT_LOCKED set
--> btrfs_buffered_write() ends up
with a non-NULL cached_state and
never calls anything to release its
reference on it, resulting in a
memory leak
Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().
The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.
This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:
[77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1
Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.
CC: stable@vger.kernel.org # 4.16+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feece6 ("btrfs: use common helper instead of open coding a bit test") CC: stable@vger.kernel.org # 4.20+ Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
[BUG]
One user reported a reproducible KASAN report about use-after-free:
BTRFS info (device sdi1): balance: start -dvrange=1256811659264..1256811659265
BTRFS info (device sdi1): relocating block group 1256811659264 flags data|raid0
==================================================================
BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
Write of size 8 at addr ffff88856f671710 by task kworker/u24:10/261579
[CAUSE]
The problem happens when finish_ordered_io() get called with balance
still running, while the reloc root of that subvolume is already dead.
(Tree is swap already done, but tree not yet deleted for possible qgroup
usage.)
That means root->reloc_root still exists, but that reloc_root can be
under btrfs_drop_snapshot(), thus we shouldn't access it.
The following race could cause the use-after-free problem:
- Test if the root has dead reloc tree before accessing root->reloc_root
If the root has BTRFS_ROOT_DEAD_RELOC_TREE, then we don't need to
create or update root->reloc_tree
- Clear the BTRFS_ROOT_DEAD_RELOC_TREE flag until we have fully dropped
reloc tree
To co-operate with above modification, so as long as
BTRFS_ROOT_DEAD_RELOC_TREE is still set, we won't try to re-create
reloc tree at record_root_in_trans().
Reported-by: Cebtenzzre <cebtenzzre@gmail.com> Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().
Since commit ec757001c818 ("gpio: Enable nonexclusive gpiods from DT
nodes") we are able to get GPIOD_FLAGS_BIT_NONEXCLUSIVE marked gpios.
Currently the gpiolib uses the wrong flags variable for the check. We
need to check the gpiod_flags instead of the of_gpio_flags else we
return -EBUSY for GPIOD_FLAGS_BIT_NONEXCLUSIVE marked and requested
gpiod's.
Fixes: ec757001c818 gpio: Enable nonexclusive gpiods from DT nodes Cc: stable@vger.kernel.org Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[Bartosz: the function was moved to gpiolib-of.c so updated the patch] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Bartosz: backported to v5.3.y] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.
On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...
Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data") Cc: <stable@vger.kernel.org> Cc: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20190930214522.240680-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
rdma_for_each_port is already incrementing the iterator's value it
receives therefore, after the first iteration the iterator is increased by
2 which eventually causing wrong queries and possible traces.
Fix the above by removing the old redundant incrementation that was used
before rdma_for_each_port() macro.
Cc: <stable@vger.kernel.org> Fixes: ea1075edcbab ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.org Signed-off-by: Mohamad Heib <mohamadh@mellanox.com> Reviewed-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
On architectures like s390, arch_free_page() could mark the page unused
(set_page_unused()) and any access later would trigger a kernel panic.
Fix it by moving arch_free_page() after all possible accessing calls.
In the past, only kernel_poison_pages() would trigger this but it needs
"page_poison=on" kernel cmdline, and I suspect nobody tested that on
s390. Recently, kernel_init_free_pages() (commit 6471384af2a6 ("mm:
security: introduce init_on_alloc=1 and init_on_free=1 boot options"))
was added and could trigger this as well.
[akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/1569613623-16820-1-git-send-email-cai@lca.pw Fixes: 8823b1dbc05f ("mm/page_poison.c: enable PAGE_POISONING as a separate option") Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
There's a really hard to reproduce race in z3fold between z3fold_free()
and z3fold_reclaim_page(). z3fold_reclaim_page() can claim the page
after z3fold_free() has checked if the page was claimed and
z3fold_free() will then schedule this page for compaction which may in
turn lead to random page faults (since that page would have been
reclaimed by then).
Fix that by claiming page in the beginning of z3fold_free() and not
forgetting to clear the claim in the end.
Partially revert 16db3d3f1170 ("kernel/sysctl.c: threads-max observe
limits") because the patch is causing a regression to any workload which
needs to override the auto-tuning of the limit provided by kernel.
set_max_threads is implementing a boot time guesstimate to provide a
sensible limit of the concurrently running threads so that runaways will
not deplete all the memory. This is a good thing in general but there
are workloads which might need to increase this limit for an application
to run (reportedly WebSpher MQ is affected) and that is simply not
possible after the mentioned change. It is also very dubious to
override an admin decision by an estimation that doesn't have any direct
relation to correctness of the kernel operation.
Fix this by dropping set_max_threads from sysctl_max_threads so any
value is accepted as long as it fits into MAX_THREADS which is important
to check because allowing more threads could break internal robust futex
restriction. While at it, do not use MIN_THREADS as the lower boundary
because it is also only a heuristic for automatic estimation and admin
might have a good reason to stop new threads to be created even when
below this limit.
This became more severe when we switched x86 from 4k to 8k kernel
stacks. Starting since 6538b8ea886e ("x86_64: expand kernel stack to
16K") (3.16) we use THREAD_SIZE_ORDER = 2 and that halved the auto-tuned
value.
In the particular case
3.12
kernel.threads-max = 515561
4.4
kernel.threads-max = 200000
Neither of the two values is really insane on 32GB machine.
I am not sure we want/need to tune the max_thread value further. If
anything the tuning should be removed altogether if proven not useful in
general. But we definitely need a way to override this auto-tuning.
Commit 487317c99477 ("cifs: add spinlock for the openFileList to
cifsInodeInfo") added cifsInodeInfo->open_file_lock spin_lock to protect
the openFileList, but missed a few places where cifs_inode->openFileList
was enumerated. Change these remaining tcon->open_file_lock to
cifsInodeInfo->open_file_lock to avoid panic in is_size_safe_to_change.
Mark inode for force revalidation if LOOKUP_REVAL flag is set.
This tells the client to actually send a QueryInfo request to
the server to obtain the latest metadata in case a directory
or a file were changed remotely. Only do that if the client
doesn't have a lease for the file to avoid unneeded round
trips to the server.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently the client indicates that a dentry is stale when inode
numbers or type types between a local inode and a remote file
don't match. If this is the case attributes is not being copied
from remote to local, so, it is already known that the local copy
has stale metadata. That's why the inode needs to be marked for
revalidation in order to tell the VFS to lookup the dentry again
before openning a file. This prevents unexpected stale errors
to be returned to the user space when openning a file.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently if the client identifies problems when processing
metadata returned in CREATE response, the open handle is being
leaked. This causes multiple problems like a file missing a lease
break by that client which causes high latencies to other clients
accessing the file. Another side-effect of this is that the file
can't be deleted.
Fix this by closing the file after the client hits an error after
the file was opened and the open descriptor wasn't returned to
the user space. Also convert -ESTALE to -EOPENSTALE to allow
the VFS to revalidate a dentry and retry the open.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
string_to_context_struct() may garble the context string, so we need to
copy back the contents again from the old context struct to avoid
storing the corrupted context.
Since string_to_context_struct() tokenizes (and therefore truncates) the
context string and we are later potentially copying it with kstrdup(),
this may eventually cause pieces of uninitialized kernel memory to be
disclosed to userspace (when copying to userspace based on the stored
length and not the null character).
How to reproduce on Fedora and similar:
# dnf install -y memcached
# systemctl start memcached
# semodule -d memcached
# load_policy
# load_policy
# systemctl stop memcached
# ausearch -m AVC
type=AVC msg=audit(1570090572.648:313): avc: denied { signal } for pid=1 comm="systemd" scontext=system_u:system_r:init_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=process permissive=0 trawcon=73797374656D5F75007400000000000070BE6E847296FFFF726F6D000096FFFF76
Cc: stable@vger.kernel.org Reported-by: Milos Malik <mmalik@redhat.com> Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.
Detected by DMAR faults during resume.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk
(cherry picked from commit cec5ca08e36fd18d2939b98055346b3b06f56c6c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The kernel command line option efivar_ssdt= allows the name to be
specified of an EFI variable containing an ACPI SSDT table that should
be loaded into memory by the OS, and treated as if it was provided by
the firmware.
Currently, that code will always iterate over the EFI variables and
compare each name with the provided name, even if the command line
option wasn't set to begin with.
So bail early when no variable name was provided. This works around a
boot regression on the 2012 Mac Pro, as reported by Scott.
Tested-by: Scott Talbert <swt@techie.net> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Dave Young <dyoung@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Garrett <mjg59@google.com> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-integrity@vger.kernel.org Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables") Link: https://lkml.kernel.org/r/20191002165904.8819-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
We need to perform a reset a start up to make sure that the chip is in a
consistent state. This reset also disables all the interrupts which
should only be enabled together with the iio buffer. Not doing this, was
sometimes causing unwanted interrupts to trigger.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
One in two sample sets was lost by multiplying fifo_set_size with
sizeof(u16). Also, the double number of available samples were pushed to
the iio buffers.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Currently, the driver sets the FIFO_SAMPLES register with the number of
sample sets (maximum of 170 for 3 axis data, 256 for 2-axis and 512 for
single axis). However, the FIFO_SAMPLES register should store the number
of samples, regardless of how the FIFO format is configured.
Signed-off-by: Stefan Popa <stefan.popa@analog.com> Fixes: f4f55ce38e5f ("iio:adxl372: Add FIFO and interrupts support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Commit 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040
proximity and light sensor") added the support for the vcnl4040 but
forgot to add the of_compatible. Fix this by adding it now.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Reviewed-by: Angus Ainslie (Purism) angus@akkea.ca Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
When an end-of-conversion interrupt is received after performing a
single-shot reading of the light sensor, the driver was waking up the
result ready queue before checking opt->ok_to_ignore_lock to determine
if it should unlock the mutex. The problem occurred in the case where
the other thread woke up and changed the value of opt->ok_to_ignore_lock
to false prior to the interrupt thread performing its read of the
variable. In this case, the mutex would be unlocked twice.
Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com> Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
End of conversion may be handled by using IRQ or DMA. There may be a
race when two conversions complete at the same time on several ADCs.
EOC can be read as 'set' for several ADCs, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
request instead. It's then automatically cleared by DMA read. But the
handler gets called due to status bit is temporarily set (IRQ triggered
by the other ADC).
So both EOC status bit in CSR and EOCIE control bit must be checked
before invoking the interrupt handler (e.g. call ISR only for
IRQ-enabled ADCs).
Move STM32 ADC registers definitions to common header.
This is precursor patch to:
- iio: adc: stm32-adc: fix a race when using several adcs with dma and irq
It keeps registers definitions as a whole block, to ease readability and
allow simple access path to EOC bits (readl) in stm32-adc-core driver.
Since commit 9bcf15f75cac ("iio: adc: axp288: Fix TS-pin handling") we
preserve the bias current set by the firmware at boot. This fixes issues
we were seeing on various models, but it seems our old hardcoded 80ųA bias
current was working around a firmware bug on at least one model laptop.
In order to both have our cake and eat it, this commit adds a dmi based
list of models where we need to override the firmware set bias current and
adds the one model we now know needs this to it: The Lenovo Ideapad 100S
(11 inch version).
Since commit 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe
and reset alert status on probe") the error path is wrong since it
leaves the vref regulator on. Fix this by disabling both regulators.
Fixes: 0f7ddcc1bff1 ("iio:adc:ad799x: Write default config on probe and reset alert status on probe") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.
Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.
This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.
It's incorrect to compare HighestRate with 0x0b twice in the following
manner "if (HighestRate > 0x0b) ... else if (HighestRate > 0x0b) ...". The
"else if" branch is constantly false. The second comparision should be
with 0x03 according to the max_rate_idx in ODM_RAInfo_Init().
In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.
The PCM draining behavior got broken since the recent refactoring, and
this turned out to be the incorrect expectation of the firmware
behavior regarding "draining". While I expected the "drain" flag at
the stop operation would do processing the queued samples, it seems
rather dropping the samples.
As a quick fix, just drop the SNDRV_PCM_INFO_DRAIN_TRIGGER flag, so
that the driver uses the normal PCM draining procedure. Also, put
some caution comment to the function for future readers not to fall
into the same pitfall.
Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed setting gpios via platform data. This means that
fbtft will now only work with Device Tree so set the dependency.
This also prevents a NULL pointer deref on non-DT platform because
fbtftops.request_gpios is not set in that case anymore.
The fixed MKHI client on PCH 6 gen platforms
does not support fw version retrieval.
The error is not fatal, but it fills up the kernel logs and
slows down the driver start.
This patch disables requesting FW version on GEN6 and earlier platforms.
Fixes warning:
[ 15.964298] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[ 15.964301] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: version command failed -5
Cc: <stable@vger.kernel.org> +v4.18 Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191004181722.31374-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The driver was accessing its struct usb_device in its release()
callback without holding a reference. This would lead to a
use-after-free whenever the device was disconnected while the character
device was still open.
The driver would return with a nonzero open count in case the reset
control request failed. This would prevent any further attempts to open
the char dev until the device was disconnected.
Fix this by incrementing the open count only on successful open.
The driver is using its struct usb_device pointer as an inverted
disconnected flag, but was setting it to NULL before making sure all
completion handlers had run. This could lead to a NULL-pointer
dereference in a number of dev_dbg and dev_err statements in the
completion handlers which relies on said pointer.
Fix this by unconditionally stopping all I/O and preventing
resubmissions by poisoning the interrupt URBs at disconnect and using a
dedicated disconnected flag.
This also makes sure that all I/O has completed by the time the
disconnect callback returns.
projects / mirror_ubuntu-eoan-kernel.git / log