Sven Schnelle [Fri, 23 Aug 2019 19:49:13 +0000 (21:49 +0200)]
kexec: add KEXEC_ELF
Right now powerpc provides an implementation to read elf files
with the kexec_file_load() syscall. Make that available as a public
kexec interface so it can be re-used on other architectures.
ccio_request_resource() may fail to allocate regions for the hppb
driver. Do not print a misleading warning in this case.
This was noticed on a HP D350/2 machine.
Helge Deller [Mon, 12 Aug 2019 17:13:20 +0000 (19:13 +0200)]
parisc: speed up flush_tlb_all_local with qemu
When started in qemu, we know that qemu will drop all local TLB entries
on any pxtlbe instruction. So, if we detect qemu, replace the whole
flush_tlb_all_local function by one pdtlbe instruction.
Helge Deller [Mon, 12 Aug 2019 17:11:06 +0000 (19:11 +0200)]
parisc: Add ALTERNATIVE_CODE() and ALT_COND_RUN_ON_QEMU
The macro ALTERNATIVE_CODE() allows assembly code to patch in a series
of new assembler statements given at a specific start address.
The ALT_COND_RUN_ON_QEMU condition is true if the kernel is started in a
qemu emulation.
Linus Torvalds [Fri, 2 Aug 2019 22:26:48 +0000 (15:26 -0700)]
Merge tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a small cleanup
- a fix for a build error on ARM with some configs
- a fix of a patch for the Xen gntdev driver
- three patches for fixing a potential problem in the swiotlb-xen
driver which Konrad was fine with me carrying them through the Xen
tree
* tag 'for-linus-5.3a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: remember having called xen_create_contiguous_region()
xen/swiotlb: simplify range_straddles_page_boundary()
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
xen: avoid link error on ARM
xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()
xen/pciback: remove set but not used variable 'old_state'
Linus Torvalds [Fri, 2 Aug 2019 22:23:27 +0000 (15:23 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Update the compat layer to allow single-byte watchpoints on all
addresses (similar to the native support)
- arm_pmu: fix the restoration of the counters on the
CPU_PM_ENTER_FAILED path
- Fix build regression with vDSO and Makefile not stripping
CROSS_COMPILE_COMPAT
- Fix the CTR_EL0 (cache type register) sanitisation on heterogeneous
machines (e.g. big.LITTLE)
- Fix the interrupt controller priority mask value when pseudo-NMIs are
enabled
- arm64 kprobes fixes: recovering of the PSTATE.D flag in the
single-step exception handler, NOKPROBE annotations for
unwind_frame() and walk_stackframe(), remove unneeded
rcu_read_lock/unlock from debug handlers
- Several gcc fall-through warnings
- Unused variable warnings
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Make debug exception handlers visible from RCU
arm64: kprobes: Recover pstate.D in single-step exception handler
arm64/mm: fix variable 'tag' set but not used
arm64/mm: fix variable 'pud' set but not used
arm64: Remove unneeded rcu_read_lock from debug handlers
arm64: unwind: Prohibit probing on return_address()
arm64: Lower priority mask for GIC_PRIO_IRQON
arm64/efi: fix variable 'si' set but not used
arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}
arm64: vdso: Fix Makefile regression
arm64: module: Mark expected switch fall-through
arm64: smp: Mark expected switch fall-through
arm64: hw_breakpoint: Fix warnings about implicit fallthrough
drivers/perf: arm_pmu: Fix failure path in PM notifier
arm64: compat: Allow single-byte watchpoints on all addresses
* 'parisc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add archclean Makefile target
parisc: Strip debug info from kernel before creating compressed vmlinuz
parisc: Fix build of compressed kernel even with debug enabled
parisc: fix race condition in patching code
parisc: rename default_defconfig to defconfig
parisc: Fix fall-through warnings in fpudispatch.c
parisc: Mark expected switch fall-throughs in fault.c
Linus Torvalds [Fri, 2 Aug 2019 22:13:27 +0000 (15:13 -0700)]
Merge tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Default configs updates
- Minor qdio cleanup
- Sparse warnings fixes
- Implicit-fallthrough warnings fixes
* tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough
vfio-ccw: make vfio_ccw_async_region_ops static
s390/3215: add switch fall through comment for -Wimplicit-fallthrough
s390/tape: add fallthrough annotations
s390/mm: add fallthrough annotations
s390/mm: make gmap_test_and_clear_dirty_pmd static
s390/kexec: add missing include to machine_kexec_reloc.c
s390/perf: make cf_diag_csd static
s390/lib: add missing include
s390/boot: add missing declarations and includes
s390: update configs
s390: clean up qdio.h
Linus Torvalds [Fri, 2 Aug 2019 21:46:33 +0000 (14:46 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes to four drivers with no core changes.
The mpt3sas one is theoretical until we get a CPU that goes up to 64
bits physical, the qla2xxx one fixes an oops in a driver
initialization error leg and the others are mostly cosmetic"
[ The fcoe patches may be worth highlighting - they may be "just"
cleanups, but they simplify and fix the odd fc_rport_priv structure
handling rules so that the new gcc-9 warnings about memset crossing
structure boundaries are gone.
The old code was hard for humans to understand too, and really
confused the compiler sanity checks - Linus ]
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix possible fcport null-pointer dereferences
scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
scsi: hpsa: remove printing internal cdb on tag collision
scsi: hpsa: correct scsi command status issue after reset
scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv
scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
scsi: libfc: Whitespace cleanup in libfc.h
* tag 'for-linus-20190802' of git://git.kernel.dk/linux-block:
s390/dasd: fix endless loop after read unit address configuration
block: Fix __blkdev_direct_IO() for bio fragments
MAINTAINERS: floppy: take over maintainership
nbd: replace kill_bdev() with __invalidate_device() again
ata: libahci: do not complain in case of deferred probe
io_uring: fix KASAN use after free in io_sq_wq_submit_work
loop: Fix mount(2) failure due to race with LOOP_SET_FD
libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
ataflop: Mark expected switch fall-through
Linus Torvalds [Fri, 2 Aug 2019 21:28:40 +0000 (14:28 -0700)]
Merge tag 'for-5.3/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix NULL pointer and various whitespace issues with DM's recent DAX
code changes from commit in 5.3 merge"
* tag 'for-5.3/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm table: fix various whitespace issues with recent DAX code
dm table: fix dax_dev NULL dereference in device_synchronous()
Linus Torvalds [Fri, 2 Aug 2019 21:23:24 +0000 (14:23 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"Here's our second -rc pull request. Nothing particularly special in
this one. The client removal deadlock fix is kindy tricky, but we had
multiple eyes on it and no one could find a fault in it. A couple
Spectre V1 fixes too. Otherwise, all just normal -rc fodder:
- A couple Spectre V1 fixes (umad, hfi1)
- Fix a tricky deadlock in the rdma core code with refcounting
instead of locks (client removal patches)
- Build errors (hns)
- Fix a scheduling while atomic issue (mlx5)
- Use after free fix (mad)
- Fix error path return code (hns)
- Null deref fix (siw_crypto_hash)
- A few other misc. minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp()
RDMA/mlx5: Release locks during notifier unregister
IB/hfi1: Fix Spectre v1 vulnerability
IB/mad: Fix use-after-free in ib mad completion handling
RDMA/restrack: Track driver QP types in resource tracker
IB/mlx5: Fix MR registration flow to use UMR properly
RDMA/devices: Remove the lock around remove_client_context
RDMA/devices: Do not deadlock during client removal
IB/core: Add mitigation for Spectre V1
Do not dereference 'siw_crypto_shash' before checking
RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes
RDMA/hns: Fix build error
Linus Torvalds [Fri, 2 Aug 2019 21:19:41 +0000 (14:19 -0700)]
Merge tag 'for-5.3-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tiny race window during 2 transactions aborting at the same time can
accidentally lead to a commit
- regression fix, possible deadlock during fiemap
- fix for an old bug when incremental send can fail on a file that has
been deduplicated in a special way
* tag 'for-5.3-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix deadlock between fiemap and transaction commits
Btrfs: fix race leading to fs corruption after transaction abort
Btrfs: fix incremental send failure after deduplication
Linus Torvalds [Fri, 2 Aug 2019 15:53:34 +0000 (08:53 -0700)]
Merge tag 'sound-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- A further fix for syzcaller issues with USB-audio, addressing NULL
dereference that was introduced by the recent fix
- Avoid a long delay at boot with HD-audio when i915 module was built
but not installed, found on some Debian systems
- A fix of small race window at PCM draining
* tag 'sound-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain
ALSA: hda: Fix 1-minute detection delay when i915 module is not available
Linus Torvalds [Fri, 2 Aug 2019 15:50:37 +0000 (08:50 -0700)]
Merge tag 'drm-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Thanks to Daniel for handling the email the last couple of weeks, flus
and break-ins combined to derail me. Surprised nothing materialised
today to take me out again.
Just more amdgpu navi fixes, msm fixes and a single nouveau regression
fix:
amdgpu:
- navi10 temperature and pstate fixes
- vcn dynamic power management fix
- CS ioctl error handling fix
- debugfs info leak fix
- amdkfd VegaM fix
nouveau:
- regression fix for displayport MST support"
* tag 'drm-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau: Only release VCPI slots on mode changes
drm: msm: Fix add_gpu_components
drm/msm: Annotate intentional switch statement fall throughs
drm/msm: add support for per-CRTC max_vblank_count on mdp5
drm/msm: Use the correct dma_sync calls in msm_gem
drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval
drm/amd/powerplay: correct Navi10 VCN powergate control (v2)
drm/amd/powerplay: support VCN powergate status retrieval for SW SMU
drm/amd/powerplay: support VCN powergate status retrieval on Raven
drm/amd/powerplay: add new sensor type for VCN powergate status
drm/amdgpu: fix a potential information leaking bug
drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep
drm/amd/powerplay: enable SW SMU reset functionality
drm/amd/powerplay: fix null pointer dereference around dpm state relates
drm/amdgpu/powerplay: use proper revision id for navi
drm/amd/powerplay: fix temperature granularity error in smu11
drm/amd/powerplay: add callback function of get_thermal_temperature_range
drm/amdkfd: Fix byte align on VegaM
Linus Torvalds [Fri, 2 Aug 2019 15:47:28 +0000 (08:47 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few fixes for code that came in during the merge window or that
started getting exercised differently this time around:
- Select regmap MMIO kconfig in spreadtrum driver to avoid compile
errors
- Complete kerneldoc on devm_clk_bulk_get_optional()
- Register an essential clk earlier on mediatek mt8183 SoCs so the
clocksource driver can use it
- Fix divisor math in the at91 driver
- Plug a race in Renesas reset control logic"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: renesas: cpg-mssr: Fix reset control race condition
clk: sprd: Select REGMAP_MMIO to avoid compile errors
clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource
clk: Add missing documentation of devm_clk_bulk_get_optional() argument
clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1
Linus Torvalds [Fri, 2 Aug 2019 15:44:33 +0000 (08:44 -0700)]
Merge tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping
Pull arm swiotlb support from Christoph Hellwig:
"This fixes a cascade of regressions that originally started with the
addition of the ia64 port, but only got fatal once we removed most
uses of block layer bounce buffering in Linux 4.18.
The reason is that while the original i386/PAE code that was the first
architecture that supported > 4GB of memory without an iommu decided
to leave bounce buffering to the subsystems, which in those days just
mean block and networking as no one else consumed arbitrary userspace
memory.
Later with ia64, x86_64 and other ports we assumed that either an
iommu or something that fakes it up ("software IOTLB" in beautiful
Intel speak) is present and that subsystems can rely on that for
dealing with addressing limitations in devices. Except that the ARM
LPAE scheme that added larger physical address to 32-bit ARM did not
follow that scheme and thus only worked by chance and only for block
and networking I/O directly to highmem.
Long story, short fix - add swiotlb support to arm when build for LPAE
platforms, which actuallys turns out to be pretty trivial with the
modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression"
* tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping:
arm: use swiotlb for bounce buffering on LPAE configs
dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
Linus Torvalds [Fri, 2 Aug 2019 15:41:11 +0000 (08:41 -0700)]
Merge tag 'dma-mapping-5.3-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping regression fixes from Christoph Hellwig:
"Two related regression fixes for changes from this merge window to fix
alignment issues introduced in the CMA allocation rework (Nicolin
Chen)"
* tag 'dma-mapping-5.3-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: page-align the size in dma_free_contiguous()
dma-contiguous: do not overwrite align in dma_alloc_contiguous()
s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough
Silence the following warnings when built with -Wimplicit-fallthrough=3
enabled by default since 5.3-rc2:
In file included from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:6,
from ./include/linux/slab.h:15,
from drivers/s390/crypto/ap_queue.c:13:
drivers/s390/crypto/ap_queue.c: In function 'ap_sm_recv':
./include/linux/list.h:577:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
577 | for (pos = list_first_entry(head, typeof(*pos), member); \
| ^~~
drivers/s390/crypto/ap_queue.c:147:3: note: in expansion of macro 'list_for_each_entry'
147 | list_for_each_entry(ap_msg, &aq->pendingq, list) {
| ^~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/ap_queue.c:155:2: note: here
155 | case AP_RESPONSE_NO_PENDING_REPLY:
| ^~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ep11_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:871:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
871 | if (msg->cprbx.cprb_ver_id == 0x04)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:874:2: note: here
874 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_rng':
drivers/s390/crypto/zcrypt_msgtype6.c:901:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
901 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:907:2: note: here
907 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:838:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
838 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:844:2: note: here
844 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ica':
drivers/s390/crypto/zcrypt_msgtype6.c:801:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
801 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:808:2: note: here
808 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
Acked-by: Patrick Steuer <patrick.steuer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
arm64: Make debug exception handlers visible from RCU
Make debug exceptions visible from RCU so that synchronize_rcu()
correctly track the debug exception handler.
This also introduces sanity checks for user-mode exceptions as same
as x86's ist_enter()/ist_exit().
The debug exception can interrupt in idle task. For example, it warns
if we put a kprobe on a function called from idle task as below.
The warning message showed that the rcu_read_lock() caused this
problem. But actually, this means the RCU is lost the context which
is already in NMI/IRQ.
arm64: kprobes: Recover pstate.D in single-step exception handler
kprobes manipulates the interrupted PSTATE for single step, and
doesn't restore it. Thus, if we put a kprobe where the pstate.D
(debug) masked, the mask will be cleared after the kprobe hits.
Moreover, in the most complicated case, this can lead a kernel
crash with below message when a nested kprobe hits.
[ 152.118921] Unexpected kernel single-step exception at EL1
When the 1st kprobe hits, do_debug_exception() will be called.
At this point, debug exception (= pstate.D) must be masked (=1).
But if another kprobes hits before single-step of the first kprobe
(e.g. inside user pre_handler), it unmask the debug exception
(pstate.D = 0) and return.
Then, when the 1st kprobe setting up single-step, it saves current
DAIF, mask DAIF, enable single-step, and restore DAIF.
However, since "D" flag in DAIF is cleared by the 2nd kprobe, the
single-step exception happens soon after restoring DAIF.
This has been introduced by commit 7419333fa15e ("arm64: kprobe:
Always clear pstate.D in breakpoint exception handler")
To solve this issue, this stores all DAIF bits and restore it
after single stepping.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler") Reviewed-by: James Morse <james.morse@arm.com> Tested-by: James Morse <james.morse@arm.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
s390/dasd: fix endless loop after read unit address configuration
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org # 2.6.25+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dave Airlie [Fri, 2 Aug 2019 00:17:25 +0000 (10:17 +1000)]
Merge tag 'msm-fixes-2019_08_01' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
- Fix the dma_sync calls applied last week (Rob)
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Rob Clark <robdclark@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 02 Aug 2019 05:54:27 AM AEST
# gpg: using RSA key 96F70DFDA84A070A
# gpg: Can't check signature: public key not found
From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190801200439.GV104440@art_vandelay
Lyude Paul [Thu, 1 Aug 2019 22:02:15 +0000 (18:02 -0400)]
drm/nouveau: Only release VCPI slots on mode changes
Looks like a regression got introduced into nv50_mstc_atomic_check()
that somehow didn't get found until now. If userspace changes
crtc_state->active to false but leaves the CRTC enabled, we end up
calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in
asyh->dp.pbn. However, if the display is inactive we end up calculating
a PBN of 0, which inadvertently causes us to have an allocation of 0.
>From there, if userspace then disables the CRTC afterwards we end up
accidentally attempting to free the VCPI twice:
So, fix this by doing what we probably should have done from the start: only
call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so
that VCPI allocations remain for as long as the CRTC is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST") Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: <stable@vger.kernel.org> # v5.1+ Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com
Dave Airlie [Thu, 1 Aug 2019 23:35:39 +0000 (09:35 +1000)]
Merge tag 'drm-fixes-5.3-2019-07-31' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-07-31:
amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs
ACPI: PM: Fix regression in acpi_device_set_power()
Commit f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.
Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.
Fixes: f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Damien Le Moal [Thu, 1 Aug 2019 10:21:51 +0000 (19:21 +0900)]
block: Fix __blkdev_direct_IO() for bio fragments
The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO
(patch 6a43074e2f46) introduced two problems with BIO fragment handling
for direct IOs:
1) The dio size processed is calculated by incrementing the ret variable
by the size of the bio fragment issued for the dio. However, this size
is obtained directly from bio->bi_iter.bi_size AFTER the bio submission
which may result in referencing the bi_size value after the bio
completed, resulting in an incorrect value use.
2) The ret variable is not incremented by the size of the last bio
fragment issued for the bio, leading to an invalid IO size being
returned to the user.
Fix both problem by using dio->size (which is incremented before the bio
submission) to update the value of ret after bio submissions, including
for the last bio fragment issued.
Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jeffrey Hugo [Wed, 26 Jun 2019 18:00:15 +0000 (11:00 -0700)]
drm: msm: Fix add_gpu_components
add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes. This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched. This prevents display from initing if a GPU node is
defined, but it's status is disabled.
Fix this by checking the node's status before adding it to the match list.
Leon Romanovsky [Wed, 31 Jul 2019 08:38:52 +0000 (11:38 +0300)]
RDMA/mlx5: Release locks during notifier unregister
The below kernel panic was observed when created bond mode LACP
with GRE tunnel on top. The reason to it was not released spinlock
during mlx5 notify unregsiter sequence.
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.
Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.
Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
Gal Pressman [Thu, 1 Aug 2019 10:43:54 +0000 (13:43 +0300)]
RDMA/restrack: Track driver QP types in resource tracker
The check for QP type different than XRC has excluded driver QP
types from the resource tracker.
As a result, "rdma resource show" user command would not show opened
driver QPs which does not reflect the real state of the system.
Check QP type explicitly instead of assuming enum values/ordering.
Guy Levi [Wed, 31 Jul 2019 08:19:29 +0000 (11:19 +0300)]
IB/mlx5: Fix MR registration flow to use UMR properly
Driver shouldn't allow to use UMR to register a MR when
umr_modify_atomic_disabled is set. Otherwise it will always end up with a
failure in the post send flow which sets the UMR WQE to modify atomic access
right.
Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe [Wed, 31 Jul 2019 08:18:41 +0000 (11:18 +0300)]
RDMA/devices: Remove the lock around remove_client_context
Due to the complexity of client->remove() callbacks it is desirable to not
hold any locks while calling them. Remove the last one by tracking only
the highest client ID and running backwards from there over the xarray.
Since the only purpose of that lock was to protect the linked list, we can
drop the lock.
Which is due to the read side of the client_data_rwsem being obtained
recursively through a work queue flush during cm client removal.
The lock is being held across the remove in remove_client_context() so
that the function is a fence, once it returns the client is removed. This
is required so that the two callers do not proceed with destruction until
the client completes removal.
Instead of using client_data_rwsem use the existing device unregistration
refcount and add a similar client unregistration (client->uses) refcount.
This will fence the two unregistration paths without holding any locks.
Luck, Tony [Wed, 31 Jul 2019 04:39:57 +0000 (21:39 -0700)]
IB/core: Add mitigation for Spectre V1
Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
Qian Cai [Thu, 1 Aug 2019 14:47:05 +0000 (10:47 -0400)]
arm64/mm: fix variable 'tag' set but not used
When CONFIG_KASAN_SW_TAGS=n, set_tag() is compiled away. GCC throws a
warning,
mm/kasan/common.c: In function '__kasan_kmalloc':
mm/kasan/common.c:464:5: warning: variable 'tag' set but not used
[-Wunused-but-set-variable]
u8 tag = 0xff;
^~~
Fix it by making __tag_set() a static inline function the same as
arch_kasan_set_tag() in mm/kasan/kasan.h for consistency because there
is a macro in arch/arm64/include/asm/kasan.h,
However, when CONFIG_DEBUG_VIRTUAL=n and CONFIG_SPARSEMEM_VMEMMAP=y,
page_to_virt() will call __tag_set() with incorrect type of a
parameter, so fix that as well. Also, still let page_to_virt() return
"void *" instead of "const void *", so will not need to add a similar
cast in lowmem_page_address().
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Will Deacon <will@kernel.org>
Brian Masney [Fri, 31 May 2019 09:46:15 +0000 (05:46 -0400)]
drm/msm: add support for per-CRTC max_vblank_count on mdp5
The mdp5 drm/kms driver currently does not work on command-mode DSI
panels due to 'vblank wait timed out' errors. This causes a latency
of seconds, or tens of seconds in some cases, before content is shown
on the panel. This hardware does not have the something that we can use
as a frame counter available when running in command mode, so we need to
fall back to using timestamps by setting the max_vblank_count to zero.
This can be done on a per-CRTC basis, so the convert mdp5 to use
drm_crtc_set_max_vblank_count().
This change was tested on a LG Nexus 5 (hammerhead) phone.
Qian Cai [Wed, 31 Jul 2019 20:05:45 +0000 (16:05 -0400)]
arm64/mm: fix variable 'pud' set but not used
GCC throws a warning,
arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
pud_t pud;
^~~
because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Will Deacon <will@kernel.org>
arm64: unwind: Prohibit probing on return_address()
Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
On a system with two security states, if SCR_EL3.FIQ is cleared,
non-secure IRQ priorities get shifted to fit the secure view but
priority masks aren't.
On such system, it turns out that GIC_PRIO_IRQON masks the priority of
normal interrupts, which obviously ends up in a hang.
Increase GIC_PRIO_IRQON value (i.e. lower priority) to make sure
interrupts are not blocked by it.
Linus Torvalds [Thu, 1 Aug 2019 13:37:42 +0000 (06:37 -0700)]
Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred
probe
- dw_mmc: Fix occasional hang after tuning on eMMC
- meson-mx-sdio: Fix misuse of GENMASK macro
- mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES
* tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmc_spi: Enable stable writes
mmc: meson-mx-sdio: Fix misuse of GENMASK macro
mmc: dw_mmc: Fix occasional hang after tuning on eMMC
mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()
Linus Torvalds [Thu, 1 Aug 2019 13:26:30 +0000 (06:26 -0700)]
Merge tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Three GPIO fixes, all touching the core, so quite important:
- Fix the request of active low GPIO line events.
- Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is
disabled.
- Preserve the descriptor flags when setting the initial direction on
lines"
* tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: Preserve desc->flags when setting state
gpio: don't WARN() on NULL descs if gpiolib is disabled
gpiolib: fix incorrect IRQ requesting of an active-low lineevent
James Bottomley [Thu, 1 Aug 2019 11:47:03 +0000 (13:47 +0200)]
parisc: Add archclean Makefile target
Apparently we don't have an archclean target in our
arch/parisc/Makefile, so files in there never get cleaned out by make
mrproper. This, in turn means that the sizes.h file in
arch/parisc/boot/compressed never gets removed and worse, when you
transition to an O=build/parisc[64] build model it overrides the
generated file. The upshot being my bzImage was building with a SZ_end
that was too small.
Helge Deller [Thu, 1 Aug 2019 11:33:39 +0000 (13:33 +0200)]
parisc: Fix build of compressed kernel even with debug enabled
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get
that huge that we need to increase the start addresss for the decompression
text section otherwise one will face a linker error.
Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Helge Deller <deller@gmx.de>
Juergen Gross [Fri, 14 Jun 2019 05:46:04 +0000 (07:46 +0200)]
xen/swiotlb: remember having called xen_create_contiguous_region()
Instead of always calling xen_destroy_contiguous_region() in case the
memory is DMA-able for the used device, do so only in case it has been
made DMA-able via xen_create_contiguous_region() before.
This will avoid a lot of xen_destroy_contiguous_region() calls for
64-bit capable devices.
As the memory in question is owned by swiotlb-xen the PG_owner_priv_1
flag of the first allocated page can be used for remembering.
range_straddles_page_boundary() is open coding several macros from
include/xen/page.h. Use those instead. Additionally there is no need
to have check_pages_physically_contiguous() as a separate function as
it is used only once, so merge it into range_straddles_page_boundary().
Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Juergen Gross [Fri, 14 Jun 2019 05:46:02 +0000 (07:46 +0200)]
xen/swiotlb: fix condition for calling xen_destroy_contiguous_region()
The condition in xen_swiotlb_free_coherent() for deciding whether to
call xen_destroy_contiguous_region() is wrong: in case the region to
be freed is not contiguous calling xen_destroy_contiguous_region() is
the wrong thing to do: it would result in inconsistent mappings of
multiple PFNs to the same MFN. This will lead to various strange
crashes or data corruption.
Instead of calling xen_destroy_contiguous_region() in that case a
warning should be issued as that situation should never occur.
Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Rob Clark [Tue, 30 Jul 2019 21:46:28 +0000 (14:46 -0700)]
drm/msm: Use the correct dma_sync calls in msm_gem
[subject was: drm/msm: shake fist angrily at dma-mapping]
So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops. The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).
Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul changed subject to something more desriptive] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com
Bluetooth: hci_uart: check for missing tty operations
Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.
This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.
Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.36+ Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Yu-Chen, Cho <acho@suse.com> Tested-by: Yu-Chen, Cho <acho@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Wed, 31 Jul 2019 19:32:40 +0000 (15:32 -0400)]
mm: slub: Fix slab walking for init_on_free
To properly clear the slab on free with slab_want_init_on_free, we walk
the list of free objects using get_freepointer/set_freepointer.
The value we get from get_freepointer may not be valid. This isn't an
issue since an actual value will get written later but this means
there's a chance of triggering a bug if we use this value with
set_freepointer:
Merge tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two minor fixes:
- Fix trace event header include guards, as several did not match the
#define to the #ifdef
- Remove a redundant test to ftrace_graph_notrace_addr() that was
accidentally added"
* tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
fgraph: Remove redundant ftrace_graph_notrace_addr() test
tracing: Fix header include guards in trace event headers
Qian Cai [Tue, 30 Jul 2019 21:23:48 +0000 (17:23 -0400)]
arm64/efi: fix variable 'si' set but not used
GCC throws out this warning on arm64.
drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]
Fix it by making free_screen_info() a static inline function.
Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Will Deacon [Tue, 30 Jul 2019 14:40:20 +0000 (15:40 +0100)]
arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG}
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers") Cc: <stable@vger.kernel.org> # 4.4.x- Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
$ make oldconfig && make
arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT.
Stop.
Accordingly to the section 7.2 of the GNU Make manual "Syntax of
Conditionals", "When the value results from complex expansions of
variables and functions, expansions you would consider empty may
actually contain whitespace characters and thus are not seen as
empty. However, you can use the strip function to avoid interpreting
whitespace as a non-empty value."
Fix the issue adding strip to the CROSS_COMPILE_COMPAT string
evaluation.
With the recent iomap write page reclaim deadlock fix, it turns out that the
GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this
happened as a side effect of always adding the inode buffer head to the current
transaction with gfs2_trans_add_meta, but this isn't happening consistently
anymore. Fix by removing an additional unnecessary gfs2_trans_add_meta call
and by setting the GLF_DIRTY flag in gfs2_iomap_end.
(The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when
syncing out the glock of that inode. When the flag isn't set, inode_go_sync
will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will
lead to cluster incoherency.)
In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the
inode as I_DIRTY_DATASYNC to have the inode added to the current transaction:
we don't expect metadata to change here, but let's err on the safe side.
Al Viro [Sat, 27 Jul 2019 12:29:57 +0000 (08:29 -0400)]
Unbreak mount_capable()
In "consolidate the capability checks in sget_{fc,userns}())" the
wrong argument had been passed to mount_capable() by sget_fc().
That mistake had been further obscured later, when switching
mount_capable() to fs_context has moved the calculation of
bogus argument from sget_fc() to mount_capable() itself. It
should've been fc->user_ns all along.
Screwed-up-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: Christian Brauner <christian@brauner.io> Tested-by: Christian Brauner <christian@brauner.io> Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I would like to maintain the floppy driver. After the recent fixes,
I think I know the code pretty well. Nowadays I've got 2 physical 3.5"
readers to test all the changes.
nbd: replace kill_bdev() with __invalidate_device() again
Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()")
once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere")
resurrected kill_bdev() and it has been there since then. So buffer_head
mappings still get killed on a server disconnection, and we can still
hit the BUG_ON on a filesystem on the top of the nbd device.
[ 29.387920] Memory state around the buggy address:
[ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
[ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 29.392578] ^
[ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
[ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 29.396003] ==================================================================
[ 29.397260] Disabling lock debugging due to kernel taint
io_sq_wq_submit_work free and read req again.
Cc: Zhengyuan Liu <liuzhengyuan@kylinos.cn> Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a Code sequences that is to be patched spans a page break, we might
have already cleared the part on the PAGE A. If an interrupt is coming in
during the remap of the fixed mapping to PAGE B, it might execute the
patched function with only parts of the FTRACE code cleared. To prevent
this, clear the jump to our mini trampoline first, and clear the remaining
parts after this. This might also happen when patch_text() patches a
function that it calls during remap.
'default_defconfig' is an awkward name since 'defconfig' is the default.
Let's simply say 'defconfig' like other architectures. You can drop the
KBUILD_DEFCONFIG define by following the standard naming.
parisc: Fix fall-through warnings in fpudispatch.c
In fpudispatch.c we see a lot of fall-through warnings, but for this file we
prefer to not mark the switches and instead keep it in it's original state as
it's copied from HP-UX.
Wang Xiayang [Sat, 27 Jul 2019 09:30:30 +0000 (17:30 +0800)]
drm/amdgpu: fix a potential information leaking bug
Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().
Fix the path by allocating the array with kcalloc().
The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 30 Jul 2019 09:17:03 +0000 (11:17 +0200)]
drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep
We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero()
'commit df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()")'
breaks gntdev driver. If vma->vm_pgoff > 0, vm_map_pages()
will:
- use map->pages starting at vma->vm_pgoff instead of 0
- verify map->count against vma_pages()+vma->vm_pgoff instead of just
vma_pages().
In practice, this breaks using a single gntdev FD for mapping multiple
grants.
The reason is -> ( copying Marek's word from discussion)
vma->vm_pgoff is used as index passed to gntdev_find_map_index. It's
basically using this parameter for "which grant reference to map".
map struct returned by gntdev_find_map_index() describes just the pages
to be mapped. Specifically map->pages[0] should be mapped at
vma->vm_start, not vma->vm_start+vma->vm_pgoff*PAGE_SIZE.
When trying to map grant with index (aka vma->vm_pgoff) > 1,
__vm_map_pages() will refuse to map it because it will expect map->count
to be at least vma_pages(vma)+vma->vm_pgoff, while it is exactly
vma_pages(vma).
Converting vm_map_pages() to use vm_map_pages_zero() will fix the
problem.
Marek has tested and confirmed the same.
Cc: stable@vger.kernel.org # v5.2+ Fixes: df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
Evan Quan [Thu, 25 Jul 2019 04:10:34 +0000 (12:10 +0800)]
drm/amd/powerplay: fix null pointer dereference around dpm state relates
DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 26 Jul 2019 03:28:58 +0000 (22:28 -0500)]
drm/amdgpu/powerplay: use proper revision id for navi
The PCI revision id determines the sku.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Tue, 23 Jul 2019 11:56:52 +0000 (19:56 +0800)]
drm/amd/powerplay: fix temperature granularity error in smu11
in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kevin Wang [Mon, 3 Jun 2019 07:58:31 +0000 (15:58 +0800)]
drm/amd/powerplay: add callback function of get_thermal_temperature_range
1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 23 Jul 2019 14:18:01 +0000 (10:18 -0400)]
drm/amdkfd: Fix byte align on VegaM
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / mirror_ubuntu-focal-kernel.git / log