Ram Pai [Mon, 6 Nov 2017 08:50:50 +0000 (00:50 -0800)]
powerpc: Swizzle around 4K PTE bits to free up bit 5 and bit 6
We need PTE bits 3 ,4, 5, 6 and 57 to support protection-keys,
because these are the bits we want to consolidate on across all
configuration to support protection keys.
Bit 3,4,5 and 6 are currently used on 4K-pte kernels. But bit 9
and 10 are available. Hence we use the two available bits and
free up bit 5 and 6. We will still not be able to free up bit 3
and 4. In the absence of any other free bits, we will have to
stay satisfied with what we have :-(. This means we will not
be able to support 32 protection keys, but only 8. The bit
numbers are big-endian as defined in the ISA3.0
This patch does the following change to 4K PTE.
H_PAGE_F_SECOND (S) which occupied bit 4 moves to bit 7.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also moves
to bit 8,9, 10 respectively.
H_PAGE_HASHPTE (H) which occupied bit 8 moves to bit 4.
Before the patch, the 4k PTE format was as follows
0 1 2 3 4 5 6 7 8 9 10....................57.....63
: : : : : : : : : : : : :
v v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|S |G |I |X |H| | |x|x|................| |x|x|x|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
After the patch, the 4k PTE format is as follows
0 1 2 3 4 5 6 7 8 9 10....................57.....63
: : : : : : : : : : : : :
v v v v v v v v v v v v v
,-,-,-,-,--,--,--,--,-,-,-,-,-,------------------,-,-,-,
|x|x|x|B|H | | |S |G|I|X|x|x|................| |.|.|.|
'_'_'_'_'__'__'__'__'_'_'_'_'_'________________'_'_'_'_'
The patch has no code changes; just swizzles around bits.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ram Pai [Mon, 6 Nov 2017 08:50:49 +0000 (00:50 -0800)]
powerpc: shifted-by-one hidx value
0xf is considered invalid hidx value. It indicates absence of a backing
HPTE. A PTE is initialized to 0xf either
a) when it is new it is newly allocated to hold 4k-backing-HPTE
or
b) Any time it gets demoted to a 4k-backing-HPTE
This patch shifts the representation by one-modulo-0xf; i.e hidx 0 is
represented as 1, 1 as 2,... , and 0xf as 0. This convention lets us
initialize the secondary-part of the PTE to all zeroes. PTEs are anyway
zero'd when allocated. We do not have to zero them again; thus saving on
the initialization.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ram Pai [Mon, 6 Nov 2017 08:50:48 +0000 (00:50 -0800)]
powerpc: Free up four 64K PTE bits in 64K backed HPTE pages
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6
in the 64K backed HPTE pages. This along with the earlier
patch will entirely free up the four bits from 64K PTE.
The bit numbers are big-endian as defined in the ISA3.0
This patch does the following change to 64K PTE backed
by 64K HPTE.
H_PAGE_F_SECOND (S) which occupied bit 4 moves to the
second part of the pte to bit 60.
H_PAGE_F_GIX (G,I,X) which occupied bit 5, 6 and 7 also
moves to the second part of the pte to bit 61,
62, 63, 64 respectively
since bit 7 is now freed up, we move H_PAGE_BUSY (B) from
bit 9 to bit 7.
The second part of the PTE will hold
(H_PAGE_F_SECOND|H_PAGE_F_GIX) at bit 60,61,62,63.
NOTE: None of the bits in the secondary PTE were not used
by 64k-HPTE backed PTE.
Before the patch, the 64K HPTE backed 64k PTE format was
as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
The above PTE changes is applicable to hugetlbpages aswell.
The patch does the following code changes:
a) moves the H_PAGE_F_SECOND and H_PAGE_F_GIX to 4k PTE
header since it is no more needed b the 64k PTEs.
b) abstracts out __real_pte() and __rpte_to_hidx() so the
caller need not know the bit location of the slot.
c) moves the slot bits to the secondary pte.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ram Pai [Mon, 6 Nov 2017 08:50:47 +0000 (00:50 -0800)]
powerpc: Free up four 64K PTE bits in 4K backed HPTE pages
Rearrange 64K PTE bits to free up bits 3, 4, 5 and 6,
in the 4K backed HPTE pages.These bits continue to be used
for 64K backed HPTE pages in this patch, but will be freed
up in the next patch. The bit numbers are big-endian as
defined in the ISA3.0
The patch does the following change to the 4k HTPE backed
64K PTE's format.
H_PAGE_BUSY moves from bit 3 to bit 9 (B bit in the figure
below)
V0 which occupied bit 4 is not used anymore.
V1 which occupied bit 5 is not used anymore.
V2 which occupied bit 6 is not used anymore.
V3 which occupied bit 7 is not used anymore.
Before the patch, the 4k backed 64k PTE format was as follows
0 1 2 3 4 5 6 7 8 9 10...........................63
: : : : : : : : : : : :
v v v v v v v v v v v v
the four bits S,G,I,X (one quadruplet per 4k HPTE) that
cache the hash-bucket slot value, is initialized to
1,1,1,1 indicating -- an invalid slot. If a HPTE gets
cached in a 1111 slot(i.e 7th slot of secondary hash
bucket), it is released immediately. In other words,
even though 1111 is a valid slot value in the hash
bucket, we consider it invalid and release the slot and
the HPTE. This gives us the opportunity to determine
the validity of S,G,I,X bits based on its contents and
not on any of the bits V0,V1,V2 or V3 in the primary PTE
When we release a HPTE cached in the 1111 slot
we also release a legitimate slot in the primary
hash bucket and unmap its corresponding HPTE. This
is to ensure that we do get a HPTE cached in a slot
of the primary hash bucket, the next time we retry.
Though treating 1111 slot as invalid, reduces the
number of available slots in the hash bucket and may
have an effect on the performance, the probabilty of
hitting a 1111 slot is extermely low.
Compared to the current scheme, the above scheme
reduces the number of false hash table updates
significantly and has the added advantage of releasing
four valuable PTE bits for other purpose.
NOTE:even though bits 3, 4, 5, 6, 7 are not used when
the 64K PTE is backed by 4k HPTE, they continue to be
used if the PTE gets backed by 64k HPTE. The next
patch will decouple that aswell, and truely release the
bits.
This idea was jointly developed by Paul Mackerras,
Aneesh, Michael Ellermen and myself.
4K PTE format remains unchanged currently.
The patch does the following code changes
a) PTE flags are split between 64k and 4k header files.
b) __hash_page_4K() is reimplemented to reflect the
above logic.
Acked-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ram Pai [Mon, 6 Nov 2017 08:50:45 +0000 (00:50 -0800)]
powerpc: introduce pte_set_hidx() helper
Introduce pte_set_hidx().It sets the (H_PAGE_F_SECOND|H_PAGE_F_GIX) bits
at the appropriate location in the PTE of 4K PTE. For 64K PTE, it sets
the bits in the second part of the PTE. Though the implementation for
the former just needs the slot parameter, it does take some additional
parameters to keep the prototype consistent.
This function will be handy as we work towards re-arranging the bits in
the subsequent patches.
Acked-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Simon Guo [Fri, 1 Sep 2017 02:17:14 +0000 (10:17 +0800)]
selftests/powerpc: Fix build errors in powerpc ptrace selftests
GCC 7 will take "r2" in clobber list as an error and it will get
following build errors for powerpc ptrace selftests even with -fno-pic
option:
ptrace-tm-vsx.c: In function ‘tm_vsx’:
ptrace-tm-vsx.c:42:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-vsx] Error 1
ptrace-tm-spd-vsx.c: In function ‘tm_spd_vsx’:
ptrace-tm-spd-vsx.c:55:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
make[1]: *** [ptrace-tm-spd-vsx] Error 1
ptrace-tm-spr.c: In function ‘tm_spr’:
ptrace-tm-spr.c:46:2: error: PIC register clobbered by ‘r2’ in ‘asm’
asm __volatile__(
^~~
Fix the build error by removing "r2" from the clobber list. None of
these asm blocks actually clobber r2.
Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add calls for pseries platform to configure/deconfigure SR-IOV.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Bryant G. Ly [Thu, 9 Nov 2017 14:00:33 +0000 (08:00 -0600)]
powerpc/pci: Separate SR-IOV Calls
SR-IOV can now be enabled for the powernv platform and pseries
platform. Therefore move the appropriate calls to machine dependent
code instead of relying on definition at compile time.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@us.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alan Modra [Wed, 6 Dec 2017 19:12:28 +0000 (17:12 -0200)]
powerpc/modules: Fix alignment of .toc section in kernel modules
powerpc64 gcc can generate code that offsets an address, to access
part of an object in memory. If the address is a -mcmodel=medium toc
pointer relative address then code like the following is possible.
This works fine so long as var is naturally aligned, *and* r2 is
sufficiently aligned. If not, there is a possibility that the offset
added to access var+8 wraps over a n*64k+32k boundary. Modules don't
have any guarantee that r2 is sufficiently aligned. Moreover, code
generated by older compilers generates a .toc section with 2**0
alignment, which can result in relocation failures at module load time
even without the wrap problem.
Thus, this patch links modules with an aligned .toc section (Makefile
and module.lds changes), and forces alignment for out of tree modules
or those without a .toc section (module_64.c changes).
Signed-off-by: Alan Modra <amodra@gmail.com>
[desnesn: updated patch to apply to powerpc-next kernel v4.15 ] Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.vnet.ibm.com>
[mpe: Fix out-of-tree build, swap -256 for ~0xff, reflow comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nicholas Piggin [Thu, 16 Nov 2017 16:00:50 +0000 (02:00 +1000)]
powerpc/64: Don't trace irqs-off at interrupt return to soft-disabled context
When an interrupt is returning to a soft-disabled context (which can
happen for non-maskable interrupts or synchronous interrupts), it goes
through the motions of soft-disabling again, including calling
TRACE_DISABLE_INTS (i.e., trace_hardirqs_off()).
This is not necessary, because we must already be soft-disabled in the
interrupt context, it also may be causing crashes in the irq tracing
code to re-enter as an nmi. Replace it with a warning to ensure that
soft-interrupts are still disabled.
Fixes: 7c0482e3d055 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ivan Mikhaylov [Fri, 1 Dec 2017 15:58:26 +0000 (18:58 +0300)]
powerpc/44x/fsp2: tvsense workaround for dd1
TVSENSE(temperature and voltage sensors) reset is blocked (clock gated)
by the POR default of the TVS sleep config bit. As a consequence,
TVSENSE will provide erratic sensor values, which may result in
spurious (parity) errors recorded in the CMU FIR and leading to
erroneous interrupt requests once the CMU interrupt is unmasked.
Purpose of this to set up CMU in working state in any cases even
in case of parity errors.
Reviewed-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only build the OPAL console code in when necessary. This looks like it
should use CONFIG_PPC_POWERNV, but because the opal-call.S code is
64-bit only, we must only build it when we're building the boot
wrapper 64-bit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/boot: Only build uartlite if XILINX_VIRTEX=y
The serial code in uartlite.c only matches if we find one of two
Xilinx (xlnx) nodes in the device tree, there's no need to build or
link the code on other platforms.
As far as I can tell CONFIG_XILINX_VIRTEX is the appropriate symbol to
use to conditionally compile the code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Print the function address associated with the restore_r2() error to
make it easier to debug the problem.
Also clarify the wording a bit.
Before:
module_64: patch_foo: Expect noop after relocate, got 3c820000
After:
module_64: patch_foo: Expected nop after call, got 7c630034 at netdev_has_upper_dev+0x54/0xb0 [patch_foo]
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
[mpe: Change noop to nop, as that's the name of the instruction] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC didn't insert a nop after the branch to net_set_todo() because it's
a sibling call, so it never returns. The nop isn't needed after the
branch in that case.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kamalesh Babulal [Tue, 14 Nov 2017 09:29:08 +0000 (04:29 -0500)]
powerpc/modules: Add REL24 relocation support of livepatch symbols
Livepatch re-uses module loader function apply_relocate_add() to write
relocations, instead of managing them by arch-dependent
klp_write_module_reloc() function.
apply_relocate_add() doesn't understand livepatch symbols (marked with
SHN_LIVEPATCH symbol section index) and assumes them to be local
symbols by default for R_PPC64_REL24 relocation type. It fails with an
error, when trying to calculate offset with local_entry_offset():
Whereas livepatch symbols are essentially SHN_UNDEF, should be called
via stub used for global calls. This issue can be fixed by teaching
apply_relocate_add() to handle both SHN_UNDEF/SHN_LIVEPATCH symbols
via the same stub. This patch extends SHN_UNDEF code to handle
livepatch symbols too.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Santosh Sivaraj [Mon, 16 Oct 2017 05:49:14 +0000 (11:19 +0530)]
powerpc/vdso64: Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE
Current vDSO64 implementation does not have support for coarse clocks
(CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME_COARSE), for which it falls back
to system call, increasing the response time, vDSO implementation reduces
the cycle time. Below is a benchmark of the difference in execution times.
(Non-coarse clocks are also included just for completion)
The workqueue "ps3av->wq" queues a single work item &ps3av->work and hence
doesn't require ordering. It is involved in waking up ps3avd to do the
video mode setting and hence it's not being used on a memory reclaim
path. Hence, it has been converted to use system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
The work item has been flushed in ps3av_remove to ensure that
there are no pending tasks while disconnecting the driver.
Dmitry Torokhov [Wed, 1 Feb 2017 01:54:37 +0000 (17:54 -0800)]
powerpc: Use of for_each_node_by_name() instead of open-coding it
Instead of manually coding the loop with of_find_node_by_name(), let's
switch to the standard macro for iterating over nodes with given name.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[mpe: Fix build failures due to typo in mpc832x_mds.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Joe Perches [Tue, 25 Oct 2016 04:00:08 +0000 (21:00 -0700)]
powerpc: Use pr_warn instead of pr_warning
At some point, pr_warning will be removed so all logging messages use
a consistent <prefix>_warn style.
Update arch/powerpc/
Miscellanea:
o Coalesce formats
o Realign arguments
o Use %s, __func__ instead of embedded function names
o Remove unnecessary line continuations
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoff@infradead.org>
[mpe: Rebase due to some %pOF changes.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Sun, 3 Dec 2017 15:51:08 +0000 (10:51 -0500)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
"Just one fix this time around, for the late commit in the merge window
that triggered a problem with qemu. Qemu is apparently also going to
receive a fix for the discovered issue"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: avoid faulting on qemu
Linus Torvalds [Sun, 3 Dec 2017 15:46:16 +0000 (10:46 -0500)]
Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fixes:
- Drop reference to obsolete maintainer tree
- Fix overflow bug in pmbus driver
- Fix SMBUS timeout problem in jc42 driver
For the SMBUS timeout handling, we had a brief discussion if this
should be considered a bug fix or a feature. Peter says "it fixes real
problems where the application misbehave due to faulty content when
reading from an eeprom", and he needs the patch in his company's v4.14
images. This is good enough for me and warrants backport to stable
kernels"
* tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) optionally try to disable the SMBUS timeout
hwmon: (pmbus) Use 64bit math for DIRECT format values
hwmon: Drop reference to Jean's tree
Wolfram Sang [Sat, 2 Dec 2017 22:32:13 +0000 (23:32 +0100)]
Merge tag 'at24-4.15-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
Please consider pulling the following fixes for v4.15. While it doesn't
fix any regression introduced in the v4.15 merge window, we have a
feature in at24 since linux v4.8 - reading the mac address block from
at24mac series - which turned out to be not working.
This pull request contains changes that fix it together with a patch
that hardens the read and write argument sanitization with
out-of-bounds checks that were missing.
Linus Torvalds [Sat, 2 Dec 2017 01:04:20 +0000 (20:04 -0500)]
Merge tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These patches fix a problem with compiling using an old version of
gcc, and also fix up error handling in the SUNRPC layer.
- NFSv4: Ensure gcc 4.4.4 can compile initialiser for
"invalid_stateid"
- SUNRPC: Allow connect to return EHOSTUNREACH
- SUNRPC: Handle ENETDOWN errors"
* tag 'nfs-for-4.15-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Handle ENETDOWN errors
SUNRPC: Allow connect to return EHOSTUNREACH
NFSv4: Ensure gcc 4.4.4 can compile initialiser for "invalid_stateid"
Linus Torvalds [Sat, 2 Dec 2017 01:00:19 +0000 (20:00 -0500)]
Merge tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are some bug fixes for 4.15-rc2.
- fix memory leaks that appeared after removing ifork inline data
buffer
- recover deferred rmap update log items in correct order
- fix memory leaks when buffer construction fails
- fix memory leaks when bmbt is corrupt
- fix some uninitialized variables and math problems in the quota
scrubber
- add some omitted attribution tags on the log replay commit
- fix some UBSAN complaints about integer overflows with large sparse
files
- implement an effective inode mode check in online fsck
- fix log's inability to retry quota item writeout due to transient
errors"
* tag 'xfs-4.15-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Properly retry failed dquot items in case of error during buffer writeback
xfs: scrub inode mode properly
xfs: remove unused parameter from xfs_writepage_map
xfs: ubsan fixes
xfs: calculate correct offset in xfs_scrub_quota_item
xfs: fix uninitialized variable in xfs_scrub_quota
xfs: fix leaks on corruption errors in xfs_bmap.c
xfs: fortify xfs_alloc_buftarg error handling
xfs: log recovery should replay deferred ops in order
xfs: always free inline data before resetting inode fork during ifree
Linus Torvalds [Sat, 2 Dec 2017 00:39:12 +0000 (19:39 -0500)]
Merge tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V cleanups and ABI fixes from Palmer Dabbelt:
"This contains a handful of small cleanups that are a result of
feedback that didn't make it into our original patch set, either
because the feedback hadn't been given yet, I missed the original
emails, or we weren't ready to submit the changes yet.
I've been maintaining the various cleanup patch sets I have as their
own branches, which I then merged together and signed. Each merge
commit has a short summary of the changes, and each branch is based on
your latest tag (4.15-rc1, in this case). If this isn't the right way
to do this then feel free to suggest something else, but it seems sane
to me.
Here's a short summary of the changes, roughly in order of how
interesting they are.
- libgcc.h has been moved from include/lib, where it's the only
member, to include/linux. This is meant to avoid tab completion
conflicts.
- VDSO entries for clock_get/gettimeofday/getcpu have been added.
These are simple syscalls now, but we want to let glibc use them
from the start so we can make them faster later.
- A VDSO entry for instruction cache flushing has been added so
userspace can flush the instruction cache.
- The VDSO symbol versions for __vdso_cmpxchg{32,64} have been
removed, as those VDSO entries don't actually exist.
- __io_writes has been corrected to respect the given type.
- A new READ_ONCE in arch_spin_is_locked().
- __test_and_op_bit_ord() is now actually ordered.
- Various small fixes throughout the tree to enable allmodconfig to
build cleanly.
- Removal of some dead code in our atomic support headers.
- Improvements to various comments in our atomic support headers"
* tag 'riscv-for-linus-4.15-rc2_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: (23 commits)
RISC-V: __io_writes should respect the length argument
move libgcc.h to include/linux
RISC-V: Clean up an unused include
RISC-V: Allow userspace to flush the instruction cache
RISC-V: Flush I$ when making a dirty page executable
RISC-V: Add missing include
RISC-V: Use define for get_cycles like other architectures
RISC-V: Provide stub of setup_profiling_timer()
RISC-V: Export some expected symbols for modules
RISC-V: move empty_zero_page definition to C and export it
RISC-V: io.h: type fixes for warnings
RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros
RISC-V: use generic serial.h
RISC-V: remove spin_unlock_wait()
RISC-V: `sfence.vma` orderes the instruction cache
RISC-V: Add READ_ONCE in arch_spin_is_locked()
RISC-V: __test_and_op_bit_ord should be strongly ordered
RISC-V: Remove smb_mb__{before,after}_spinlock()
RISC-V: Remove __smp_bp__{before,after}_atomic
RISC-V: Comment on why {,cmp}xchg is ordered how it is
...
Linus Torvalds [Sat, 2 Dec 2017 00:37:03 +0000 (19:37 -0500)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The critical one here is a fix for fpsimd register corruption across
signals which was introduced by the SVE support code (the register
files overlap), but the others are worth having as well.
Summary:
- Fix FP register corruption when SVE is not available or in use
- Fix out-of-tree module build failure when CONFIG_ARM64_MODULE_PLTS=y
- Missing 'const' generating errors with LTO builds
- Remove unsupported events from Cortex-A73 PMU description
- Removal of stale and incorrect comments"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: context: Fix comments and remove pointless smp_wmb()
arm64: cpu_ops: Add missing 'const' qualifiers
arm64: perf: remove unsupported events for Cortex-A73
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
arm64: pgd: Mark pgd_cache as __ro_after_init
arm64: ftrace: emit ftrace-mod.o contents through code
arm64: module-plts: factor out PLT generation code for ftrace
arm64: mm: cleanup stale AIVIVT references
Palmer Dabbelt [Fri, 1 Dec 2017 21:31:31 +0000 (13:31 -0800)]
RISC-V: Fixes for clean allmodconfig build
Olaf said: Here's a short series of patches that produces a working
allmodconfig. Would be nice to see them go in so we can add build
coverage.
I've dropped patches 8 and 10 from the original set:
* [PATCH 08/10] (RISC-V: Set __ARCH_WANT_RENAMEAT to pick up generic
version) has a better fix that I've sent out for review, we don't want
renameat.
* [PATCH 10/10] (input: joystick: riscv has get_cycles) has already been
taken into Dmitry Torokhov's tree.
Palmer Dabbelt [Fri, 1 Dec 2017 21:12:10 +0000 (13:12 -0800)]
RISC-V: User-Visible Changes
This merge contains the user-visible, ABI-breaking changes that we want
to make sure we have in Linux before our first release. Highlights
include:
* VDSO entries for clock_get/gettimeofday/getcpu have been added. These
are simple syscalls now, but we want to let glibc use them from the
start so we can make them faster later.
* A VDSO entry for instruction cache flushing has been added so
userspace can flush the instruction cache.
* The VDSO symbol versions for __vdso_cmpxchg{32,64} have been removed,
as those VDSO entries don't actually exist.
Palmer Dabbelt [Fri, 1 Dec 2017 21:10:42 +0000 (13:10 -0800)]
RISC-V Atomic Cleanups
This patch set is the result of some feedback that filtered through
after our original patch set was reviewed, some of which was the result
of me missing some email. It contains:
* A new READ_ONCE in arch_spin_is_locked()
* __test_and_op_bit_ord() is now actually ordered
* Improvements to various comments
* Removal of some dead code
Linus Torvalds [Fri, 1 Dec 2017 13:40:17 +0000 (08:40 -0500)]
Merge tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for nasty kexec/kdump crashes in certain configurations.
A couple of minor fixes for the new TIDR code.
A fix for an oops in a CXL error handling path.
Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh
Salgaonkar, Vaibhav Jain"
* tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Do not assign thread.tidr if already assigned
powerpc: Avoid signed to unsigned conversion in set_thread_tidr()
powerpc/kexec: Fix kexec/kdump in P9 guest kernels
powerpc/powernv: Fix kexec crashes caused by tlbie tracing
cxl: Check if vphb exists before iterating over AFU devices
Linus Torvalds [Fri, 1 Dec 2017 13:14:22 +0000 (08:14 -0500)]
Merge tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Ensure that debugfs files are removed properly
- Fix missing blk_put_request()
- Deal with errors from blk_get_request()
- Rewind mmc bus suspend operations at failures
- Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex
MMC host:
- sdhci-msm: Make it optional to wait for signal level changes
- sdhci: Avoid swiotlb buffer being full"
* tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: prepend 0x to OCR entry in sysfs
mmc: core: prepend 0x to pre_eol_info entry in sysfs
mmc: sdhci: Avoid swiotlb buffer being full
mmc: sdhci-msm: Optionally wait for signal level changes
mmc: block: Ensure that debugfs files are removed
mmc: core: Do not leave the block driver in a suspended state
mmc: block: Check return value of blk_get_request()
mmc: block: Fix missing blk_put_request()
amdgpu:
- New display code (dc) dpms, suspend/resume and smatch fixes, along
with some others
- Some regression fixes for amdkfd/radeon.
- Fix a ttm regression for swiotlb disabled
bridge:
- A bunch of fixes for the tc358767 bridge
mali-dp + hdlcd:
- some fixes and internal API catchups.
imx-drm:
-regression fix in atomic code.
omapdrm:
- platform detection regression fixes"
* tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits)
drm/imx: always call wait_for_flip_done in commit_tail
omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init()
drm: omapdrm: Fix DPI on platforms using the DSI VDDS
omapdrm: hdmi4: Correct the SoC revision matching
drm/omap: displays: panel-dpi: add backlight dependency
drm/omap: Fix error handling path in 'omap_dmm_probe()'
drm/i915: Disable THP until we have a GPU read BW W/A
drm/bridge: tc358767: fix 1-lane behavior
drm/bridge: tc358767: fix AUXDATAn registers access
drm/bridge: tc358767: fix timing calculations
drm/bridge: tc358767: fix DP0_MISC register set
drm/bridge: tc358767: filter out too high modes
drm/bridge: tc358767: do no fail on hi-res displays
drm/bridge: Fix lvds-encoder since the panel_bridge rework.
drm/bridge: synopsys/dw-hdmi: Enable cec clock
drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/fb_helper: Disable all crtc's when initial setup fails.
drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive
...
Linus Torvalds [Fri, 1 Dec 2017 13:05:45 +0000 (08:05 -0500)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A selection of fixes/changes that should make it into this series.
This contains:
- NVMe, two merges, containing:
- pci-e, rdma, and fc fixes
- Device quirks
- Fix for a badblocks leak in null_blk
- bcache fix from Rui Hua for a race condition regression where
-EINTR was returned to upper layers that didn't expect it.
- Regression fix for blktrace for a bug introduced in this series.
- blktrace cleanup for cgroup id.
- bdi registration error handling.
- Small series with cleanups for blk-wbt.
- Various little fixes for typos and the like.
Nothing earth shattering, most important are the NVMe and bcache fixes"
* 'for-linus' of git://git.kernel.dk/linux-block: (34 commits)
nvme-pci: fix NULL pointer dereference in nvme_free_host_mem()
nvme-rdma: fix memory leak during queue allocation
blktrace: fix trace mutex deadlock
nvme-rdma: Use mr pool
nvme-rdma: Check remotely invalidated rkey matches our expected rkey
nvme-rdma: wait for local invalidation before completing a request
nvme-rdma: don't complete requests before a send work request has completed
nvme-rdma: don't suppress send completions
bcache: check return value of register_shrinker
bcache: recover data from backing when data is clean
bcache: Fix building error on MIPS
bcache: add a comment in journal bucket reading
nvme-fc: don't use bit masks for set/test_bit() numbers
blk-wbt: fix comments typo
blk-wbt: move wbt_clear_stat to common place in wbt_done
blk-sysfs: remove NULL pointer checking in queue_wb_lat_store
blk-wbt: remove duplicated setting in wbt_init
nvme-pci: add quirk for delay before CHK RDY for WDC SN200
block: remove useless assignment in bio_split
null_blk: fix dev->badblocks leak
...
Will Deacon [Thu, 30 Nov 2017 18:25:17 +0000 (18:25 +0000)]
arm64: context: Fix comments and remove pointless smp_wmb()
The comments in the ASID allocator incorrectly hint at an MP-style idiom
using the asid_generation and the active_asids array. In fact, the
synchronisation is achieved using a combination of an xchg operation
and a spinlock, so update the comments and remove the pointless smp_wmb().
Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Dave Martin [Thu, 30 Nov 2017 11:56:37 +0000 (11:56 +0000)]
arm64: fpsimd: Fix failure to restore FPSIMD state after signals
The fpsimd_update_current_state() function is responsible for
loading the FPSIMD state from the user signal frame into the
current task during sigreturn. When implementing support for SVE,
conditional code was added to this function in order to handle the
case where SVE state need to be loaded for the task and merged with
the FPSIMD data from the signal frame; however, the FPSIMD-only
case was unintentionally dropped.
As a result of this, sigreturn does not currently restore the
FPSIMD state of the task, except in the case where the system
supports SVE and the signal frame contains SVE state in addition to
FPSIMD state.
This patch fixes this bug by making the copy-in of the FPSIMD data
from the signal frame to thread_struct unconditional.
This remains a performance regression from v4.14, since the FPSIMD
state is now copied into thread_struct and then loaded back,
instead of _only_ being loaded into the CPU FPSIMD registers.
However, it is essential to call task_fpsimd_load() here anyway in
order to ensure that the SVE enable bit in CPACR_EL1 is set
correctly before returning to userspace. This could use some
refactoring, but since sigreturn is not a fast path I have kept
this patch as a pure fix and left the refactoring for later.
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Reported-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Ard Biesheuvel [Mon, 20 Nov 2017 17:41:30 +0000 (17:41 +0000)]
arm64: ftrace: emit ftrace-mod.o contents through code
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and
CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built
with the kernel and contains a trampoline that is linked into each
module, so that modules can be loaded far away from the kernel and
still reach the ftrace entry point in the core kernel with an ordinary
relative branch, as is emitted by the compiler instrumentation code
dynamic ftrace relies on.
In order to be able to build out of tree modules, this object file
needs to be included into the linux-headers or linux-devel packages,
which is undesirable, as it makes arm64 a special case (although a
precedent does exist for 32-bit PPC).
Given that the trampoline essentially consists of a PLT entry, let's
not bother with a source or object file for it, and simply patch it
in whenever the trampoline is being populated, using the existing
PLT support routines.
Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
David Howells [Fri, 1 Dec 2017 11:40:43 +0000 (11:40 +0000)]
afs: Properly reset afs_vnode (inode) fields
When an AFS inode is allocated by afs_alloc_inode(), the allocated
afs_vnode struct isn't necessarily reset from the last time it was used as
an inode because the slab constructor is only invoked once when the memory
is obtained from the page allocator.
This means that information can leak from one inode to the next because
we're not calling kmem_cache_zalloc(). Some of the information isn't
reset, in particular the permit cache pointer.
Bring the clearances up to date.
Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
David Howells [Fri, 1 Dec 2017 11:40:43 +0000 (11:40 +0000)]
afs: Fix permit refcounting
Fix four refcount bugs in afs_cache_permit():
(1) When checking the result of the kzalloc(), we can't just return, but
must put 'permits'.
(2) We shouldn't put permits immediately after hashing a new permit as we
need to keep the pointer stable so that we can check to see if
vnode->permit_cache has changed before we decide whether to assign to
it.
(3) 'permits' is being put twice.
(4) We need to put either the replacement or the thing replaced after the
assignment to vnode->permit_cache.
Without this, lots of the following are seen:
Kernel BUG at ffffffffa039857b [verbose debug info unavailable]
------------[ cut here ]------------
Kernel BUG at ffffffffa039858a [verbose debug info unavailable]
------------[ cut here ]------------
The addresses are in the .text..refcount section of the kafs.ko module.
Following the relocation records for the __ex_table section shows one to be
due to the decrement in afs_put_permits() and the other to be key_get() in
afs_cache_permit().
Occasionally, the following is seen:
refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0
WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac
...
Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
Linus Torvalds [Thu, 30 Nov 2017 23:49:50 +0000 (18:49 -0500)]
Merge tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a regression related to the ACPI EC handling during system
suspend/resume on some platforms and prevent modalias from being
exposed to user space for ACPI device object with "not functional and
not present" status.
Specifics:
- Fix an ACPI EC driver regression (from the 4.9 cycle) causing the
driver's power management operations to be omitted during system
suspend/resume on platforms where the EC instance from the ECDT
table is used instead of the one from the DSDT (Lv Zheng).
- Prevent modalias from being exposed to user space for ACPI device
objects with _STA returning 0 (not present and not functional) to
prevent driver modules from being loaded automatically for hardware
that is not actually present on some platforms (Hans de Goede)"
* tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / EC: Fix regression related to PM ops support in ECDT device
ACPI / bus: Leave modalias empty for devices which are not present
Dave Airlie [Thu, 30 Nov 2017 23:15:57 +0000 (09:15 +1000)]
Merge branch 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.15. Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/amd/display: USB-C / thunderbolt dock specific workaround
drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
drm/amd/display: fix gamma setting
drm/amd/display: Do not put drm_atomic_state on resume
drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
drm/amd/display: Fix potential NULL and mem leak in create_links
drm/amd/display: Fix hubp check in set_cursor_position
drm/amd/display: Fix use before NULL check in validate_timing
drm/amd/display: Bunch of smatch error and warning fixes in DC
drm/amd/display: Fix amdgpu_dm bugs found by smatch
drm/amd/display: try to find matching audio inst for enc inst first
drm/amd/display: fix seq issue: turn on clock before programming afmt.
drm/amd/display: fix memory leaks on error exit return
drm/amd/display: check plane state before validating fbc
drm/amd/display: Do DC mode-change check when adding CRTCs
drm/amd/display: Revert noisy assert messages
drm/amd/display: fix split viewport rounding error
drm/amd/display: Check aux channel before MST resume
...
Dave Airlie [Thu, 30 Nov 2017 23:15:31 +0000 (09:15 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-fixes
mali-dp interface cleanups.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: Disable planes when their CRTC gets disabled.
drm: mali-dp: Separate static internal data into a read-only structure.
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: mali-dp: switch to drm_*_get(), drm_*_put() helpers
Dave Airlie [Thu, 30 Nov 2017 23:14:46 +0000 (09:14 +1000)]
Merge tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
This is amdkfd pull request for -rc2. It contains three small fixes to the
CIK SDMA code, compilation error fix in kfd_ioctl.h and fix to accessing
a pointer after it was released.
* tag 'drm-amdkfd-fixes-2017-11-26' of git://people.freedesktop.org/~gabbayo/linux:
uapi: fix linux/kfd_ioctl.h userspace compilation errors
drm/amdkfd: fix amdkfd use-after-free GP fault
drm/amdkfd: Fix SDMA oversubsription handling
drm/amdkfd: Fix SDMA ring buffer size calculation
drm/amdgpu: Fix SDMA load/unload sequence on HWS disabled mode
Dave Airlie [Thu, 30 Nov 2017 23:14:18 +0000 (09:14 +1000)]
Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-fixes
3 hdlcd fixes/cleanups
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm/arm: Replace instances of drm_dev_unref with drm_dev_put.
drm: Fix checkpatch issue: "WARNING: braces {} are not necessary for single statement blocks."
drm: hdlcd: Update PM code to save/restore console.
Dave Airlie [Thu, 30 Nov 2017 23:11:13 +0000 (09:11 +1000)]
Merge tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: fix commit_tail for new drm_atomic_helper_setup_commit
Since commit 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before
setting the commit"), drm_atomic_helper_setup_commit expects that blocking
commits have completed flipping before the commit_tail returns. Add the missing
wait_for_flip_done to commit_tail to ensure this.
* tag 'imx-drm-fixes-2017-11-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: always call wait_for_flip_done in commit_tail
Dave Airlie [Thu, 30 Nov 2017 23:10:32 +0000 (09:10 +1000)]
Merge tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Disable transparent huge pages for now until we have a W/A
- Building fix when CONFIG_BACKLIGHT_CLASS_DEVICE is not selected
- GMBUS communication robustness
- Fbdev hotplug handling fix
* tag 'drm-intel-fixes-2017-11-30' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Disable THP until we have a GPU read BW W/A
drm/i915/gvt: Correct ADDR_4K/2M/1G_MASK definition
drm/i915/gvt: enabled pipe A default on creating vgpu
drm/i915/gvt: Move request alloc to dispatch_workload path only
drm/i915/gvt: remove skl_misc_ctl_write handler
drm/i915/gvt: Fix unsafe locking caused by spin_unlock_bh
drm/i915: fix intel_backlight_device_register declaration
drm/i915/fbdev: Serialise early hotplug events with async fbdev config
drm/i915: Prevent zero length "index" write
drm/i915: Don't try indexed reads to alternate slave addresses
Peter Rosin [Mon, 27 Nov 2017 16:31:00 +0000 (17:31 +0100)]
hwmon: (jc42) optionally try to disable the SMBUS timeout
With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver
is not always capable of avoiding the 25-35 ms timeout as specified by
the SMBUS protocol. This may cause silent corruption of the last bit of
any transfer, e.g. a one is read instead of a zero if the sensor chip
times out. This also affects the eeprom half of the nxp-se97 chip, where
this silent corruption was originally noticed. Other I2C adapters probably
suffer similar issues, e.g. bit-banging comes to mind as risky...
The SMBUS register in the nxp chip is not a standard Jedec register, but
it is not special to the nxp chips either, at least the atmel chips
have the same mechanism. Therefore, do not special case this on the
manufacturer, it is opt-in via the device property anyway.
Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Andrew Waterman [Wed, 25 Oct 2017 21:32:16 +0000 (14:32 -0700)]
RISC-V: Allow userspace to flush the instruction cache
Despite RISC-V having a direct 'fence.i' instruction available to
userspace (which we can't trap!), that's not actually viable when
running on Linux because the kernel might schedule a process on another
hart. There is no way for userspace to handle this without invoking the
kernel (as it doesn't know the thread->hart mappings), so we've defined
a RISC-V specific system call to flush the instruction cache.
This patch adds both a system call and a VDSO entry. If possible, we'd
like to avoid having the system call be considered part of the
user-facing ABI and instead restrict that to the VDSO entry -- both just
in general to avoid having additional user-visible ABI to maintain, and
because we'd prefer that users just call the VDSO entry because there
might be a better way to do this in the future (ie, one that doesn't
require entering the kernel).
Signed-off-by: Andrew Waterman <andrew@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Andrew Waterman [Wed, 25 Oct 2017 21:30:32 +0000 (14:30 -0700)]
RISC-V: Flush I$ when making a dirty page executable
The RISC-V ISA allows for instruction caches that are not coherent WRT
stores, even on a single hart. As a result, we need to explicitly flush
the instruction cache whenever marking a dirty page as executable in
order to preserve the correct system behavior.
Local instruction caches aren't that scary (our implementations actually
flush the cache, but RISC-V is defined to allow higher-performance
implementations to exist), but RISC-V defines no way to perform an
instruction cache shootdown. When explicitly asked to do so we can
shoot down remote instruction caches via an IPI, but this is a bit on
the slow side.
Instead of requiring an IPI to all harts whenever marking a page as
executable, we simply flush the currently running harts. In order to
maintain correct behavior, we additionally mark every other hart as
needing a deferred instruction cache which will be taken before anything
runs on it.
Signed-off-by: Andrew Waterman <andrew@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olof Johansson [Thu, 30 Nov 2017 01:55:20 +0000 (17:55 -0800)]
RISC-V: Add missing include
Fixes:
include/asm-generic/mm_hooks.h:20:11: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
include/asm-generic/mm_hooks.h:19:38: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olof Johansson [Thu, 30 Nov 2017 01:55:16 +0000 (17:55 -0800)]
RISC-V: Export some expected symbols for modules
These are the ones needed by current allmodconfig, so add them instead
of everything other architectures are exporting -- the rest can be
added on demand later if needed.
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olof Johansson [Thu, 30 Nov 2017 01:55:14 +0000 (17:55 -0800)]
RISC-V: io.h: type fixes for warnings
include <linux/types.h> for __iomem definition. Also, add volatile to
iounmap() like other architectures have it to avoid "discarding
volatile" warnings from some drivers.
Finally, explicitly promote the base address for INB/OUTB functions to
avoid some old legacy drivers complaining about int-to-ptr promotions.
The drivers are unlikely to work but they're included in allmodconfig
so the warnings are noisy.
Fixes, among other warnings, these with allmodconfig:
../arch/riscv/include/asm/io.h:24:21: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_free':
sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olof Johansson [Thu, 30 Nov 2017 01:55:13 +0000 (17:55 -0800)]
RISC-V: use RISCV_{INT,SHORT} instead of {INT,SHORT} for asm macros
INT and SHORT are used by some drivers that pull in the include files,
so prefixing helps avoid namespace conflicts. Other constructs in the
same file already uses this.
Fixes, among others, these warnings with allmodconfig:
../sound/core/pcm_misc.c:43:0: warning: "INT" redefined
#define INT __force int
Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Carlos Maiolino [Tue, 28 Nov 2017 16:54:10 +0000 (08:54 -0800)]
xfs: Properly retry failed dquot items in case of error during buffer writeback
Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.
Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.
This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.
Tested with the recently test-case sent to fstests list by Hou Tao.
Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Darrick J. Wong [Tue, 28 Nov 2017 05:40:19 +0000 (21:40 -0800)]
xfs: scrub inode mode properly
Since we've used up all the bits in i_mode, the existing mode check
doesn't actually do anything useful. However, we've not used all the
bit values in the format portion of i_mode, so we /do/ need to test
that for bad values.
Fixes: 80e4e1268 ("xfs: scrub inodes")
Fixes-coverity-id: 1423992 Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
Darrick J. Wong [Mon, 27 Nov 2017 17:50:22 +0000 (09:50 -0800)]
xfs: remove unused parameter from xfs_writepage_map
The first thing that xfs_writepage_map does is clobber the offset
parameter. Since we never use the passed-in value, turn the parameter
into a local variable. This gets rid of an UBSAN warning in generic/466.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
Linus Torvalds [Thu, 30 Nov 2017 16:15:19 +0000 (08:15 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
- x86 bugfixes: APIC, nested virtualization, IOAPIC
- PPC bugfix: HPT guests on a POWER9 radix host
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: Let KVM_SET_SIGNAL_MASK work as advertised
KVM: VMX: Fix vmx->nested freeing when no SMI handler
KVM: VMX: Fix rflags cache during vCPU reset
KVM: X86: Fix softlockup when get the current kvmclock
KVM: lapic: Fixup LDR on load in x2apic
KVM: lapic: Split out x2apic ldr calculation
KVM: PPC: Book3S HV: Fix migration and HPT resizing of HPT guests on radix hosts
KVM: vmx: use X86_CR4_UMIP and X86_FEATURE_UMIP
KVM: x86: Fix CPUID function for word 6 (80000001_ECX)
KVM: nVMX: Fix vmx_check_nested_events() return value in case an event was reinjected to L2
KVM: x86: ioapic: Preserve read-only values in the redirection table
KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered
KVM: x86: ioapic: Remove redundant check for Remote IRR in ioapic_set_irq
KVM: x86: ioapic: Don't fire level irq when Remote IRR set
KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race
KVM: x86: inject exceptions produced by x86_decode_insn
KVM: x86: Allow suppressing prints on RDMSR/WRMSR of unhandled MSRs
KVM: x86: fix em_fxstor() sleeping while in atomic
KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure
KVM: nVMX: Validate the IA32_BNDCFGS on nested VM-entry
...
Linus Torvalds [Thu, 30 Nov 2017 16:13:36 +0000 (08:13 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- SPDX identifiers are added to more of the s390 specific files.
- The ELF_ET_DYN_BASE base patch from Kees is reverted, with the change
some old 31-bit programs crash.
- Bug fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/gs: add compat regset for the guarded storage broadcast control block
s390: revert ELF_ET_DYN_BASE base changes
s390: Remove redundant license text
s390: crypto: Remove redundant license text
s390: include: Remove redundant license text
s390: kernel: Remove redundant license text
s390: add SPDX identifiers to the remaining files
s390: appldata: add SPDX identifiers to the remaining files
s390: pci: add SPDX identifiers to the remaining files
s390: mm: add SPDX identifiers to the remaining files
s390: crypto: add SPDX identifiers to the remaining files
s390: kernel: add SPDX identifiers to the remaining files
s390: sthyi: add SPDX identifiers to the remaining files
s390: drivers: Remove redundant license text
s390: crypto: Remove redundant license text
s390: virtio: add SPDX identifiers to the remaining files
s390: scsi: zfcp_aux: add SPDX identifier
s390: net: add SPDX identifiers to the remaining files
s390: char: add SPDX identifiers to the remaining files
s390: cio: add SPDX identifiers to the remaining files
...
Lucas Stach [Thu, 30 Nov 2017 13:31:46 +0000 (14:31 +0100)]
drm/imx: always call wait_for_flip_done in commit_tail
drm_atomic_helper_wait_for_vblanks will go away in the future.
The new drm_atomic_helper_setup_commit in 4.15 expects that blocking commits
have completed flipping before the commit_tail returns. This must be ensured
by calling wait_for_vblanks or wait_for_flip_done, where flip_done might do
a less agressive wait, which is fine for imx-drm.
Fixes: 080de2e5be2d (drm/atomic: Check for busy planes/connectors before
setting the commit) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
projects / mirror_ubuntu-kernels.git / log