Pavel Rojtberg [Wed, 28 Sep 2022 01:02:05 +0000 (18:02 -0700)]
Input: xpad - decipher xpadone packages with GIP defines
only renames, no functional changes. Some of the packets we send
seem superfluous now. Unfortunately I dont have the hardware to verify
whether they are.
Input: synaptics-rmi4 - convert to use sysfs_emit() APIs
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
rmi_f34v7_enter_flash_prog() already enables IRQs and checks the flash
status - there's no need for rmi_f34v7_start_reflash() to do the same just
before calling rmi_f34v7_enter_flash_prog().
All register offsets are fixed, and a number of places even read or
write multiple registers as a block, so there is no way to support
reordering them without move involved changes. Remove the unneeded level
of indirection in the register access.
Input: synaptics-rmi4 - make rmi_f34v7_erase_all() use the "erase all" command
A full erase is required to recover from error conditions like "Bad
Partition Table". Various individual partition erase commands can be
(and need to be) omitted, as they will fail until a new partition table
has been written.
Input: synaptics-rmi4 - reset after writing partition table
When recovering from a bad partition table (for example after an
interrupted update), a reset is necessary for the new partition table to
become effective. Without this reset, writing the core code partition
will fail with status 0x03 (Invalid Command).
Preparation for use of the "erase application" command, which is required
to recover from a bad partition table error condition. Rather than adding
complex fallback error paths for such errors, it seems more robust to do
the full erase unconditionally.
Input: synaptics-rmi4 - fix command completion check for bootloader v7/v8
The command register is reset to 0 when a command has completed. Check
for this condition instead of the error status, which will not accurately
reflect completion. In particular, the incorrect condition caused every
command error to be reported as a timeout.
Add a function that waits for the last command to complete and checks
the status, and use it where appropriate. This prepares for the subsequent
fix of the completion condition in rmi_f34_attention(), which would
previously lead to a timeout instead of a more detailed error message
whenever a command was unsuccessful with v7/v8 bootloaders.
Input: synaptics-rmi4 - fix firmware update operations with bootloader v8
Commit a6977d758fed ("Input: synaptics-rmi4 - support bootloader v8 in
f34v7") allowed the F34v7 driver to probe with bootloader v8, but it did
not update various other bootloader version checks in the F34 code.
Fixes: a6977d758fed ("Input: synaptics-rmi4 - support bootloader v8 in f34v7") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20220608124808.51402-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
dt-bindings: input: touchscreen: elants_i2c: Add compatible for eth3915n chip
This adds a new compatible string for Elan eth3915n touchscreen controller,
which is compatible with ekth3500.
Signed-off-by: Yunlong Jia <ecs.beijing2022@gmail.com> Suggested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220923083657.v5.2.Ic4e8f03868f88b8027a81bc3d414bae68978e6b7@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: auo-pixcir-ts - drop support for platform data
Currently there are no users of auo_pixcir_ts_platdata in the mainline, and
having it (with legacy gpio numbers) prevents us from converting the driver
to gpiod API, so let's drop it.
If, in the future, someone wants to use this driver on non-device tree,
non-ACPI system, they should use static device properties instead of
platform data.
dt-bindings: input: Convert mtk-pmic-keys to DT schema
Convert the mtk-pmic-keys to DT schema format.
The old binding was missing documentation for key press/release
interrupts, even though it was supported in hardware and driver,
so support for the same was added during the conversion.
Lyude Paul [Wed, 14 Sep 2022 12:34:49 +0000 (05:34 -0700)]
Input: synaptics - enable InterTouch for the ThinkPad P1 G3
Noticed this while trying to debug some unrelated issues: this laptop has
the ability to use rmi4 but doesn't by default. So let's fix that.
Tested locally, including mouse buttons, on my ThinkPad P1 G3. This might
also enable the X1 Extreme G3, but I don't have such a system to test
locally (presumably Mark can chime in if that's the case).
Jeff LaBundy [Thu, 8 Sep 2022 21:24:35 +0000 (14:24 -0700)]
Input: iqs7222 - set all ULP entry masks by default
Some devices expose an ultra-low-power (ULP) mode entry mask for
each channel. If the mask is set, the device cannot enter ULP so
long as the corresponding channel remains in an active state.
The vendor has advised setting the mask for any disabled channel.
To accommodate this suggestion, initially set all masks and then
clear them only if specified in the device tree.
Jeff LaBundy [Thu, 8 Sep 2022 21:22:46 +0000 (14:22 -0700)]
Input: iqs7222 - trim force communication command
According to the datasheets, writing only 0xFF is sufficient to
elicit a communication window. Remove the superfluous 0x00 from
the force communication command.
Input: xpad - add support for XBOX One Elite paddles
An effort has been made to support every official model and firmware
version I could track down info on. The following controllers _should_
have working paddles with this PR:
- Xbox Elite (**untested**)
- Xbox Elite Series 2 on early firmwares (**untested**)
- Xbox Elite Series 2 on v4 firmwares (Tested v4.8.1908.0)
- Xbox Elite Series 2 on v5 pre-BLE firmwares (**untested**)
- Xbox Elite Series 2 on v5 post-BLE firmwares (Tested v5.13.3143.0)
This patch also introduces correct handling for the Elite 1 controller
and properly suppresses paddle inputs when using a custom profile slot.
Starting with firmware v5.11, certain inputs for the Elite 2 were moved
to an extra packet that is not enabled by default.
We must first manually enable this extra packet in order to correctly
process paddle input data with these later firmwares.
Signed-off-by: Christopher Crockett <chaorace@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Tested-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20220818154411.510308-5-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cameron Gutman [Thu, 18 Aug 2022 15:44:09 +0000 (17:44 +0200)]
Input: xpad - fix wireless 360 controller breaking after suspend
Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.
A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.
Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: aiptek - switch to using dev_groups for driver-specific attributes
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Input: psmouse - switch to using dev_groups for driver-specific attributes
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Input: atkbd - switch to using dev_groups for driver-specific attributes
The driver core now has the ability to handle the creation and removal
of device-specific sysfs files, let's use it instead of registering and
unregistering attributes by hand.
Nuno Sá [Wed, 31 Aug 2022 04:15:03 +0000 (21:15 -0700)]
Input: adp5588-keys - use new PM macros
With the new PM macros (DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()), the
compiler has visibility to see that the functions are not used when
!CONFIG_PM and hence, remove the dead code. As such, there's no need
for '__maybe_unused'.
Nuno Sá [Wed, 31 Aug 2022 04:00:14 +0000 (21:00 -0700)]
Input: adp5588-keys - add support for fw properties
Use firmware properties (eg: OF) to get the device specific
configuration. This change just replaces the platform data since there
was no platform using it and so, it makes no sense having both.
Special note to the PULL-UP disable setting that is now supported as
part of the gpio subsystem (using 'set_config()' callback).
Nuno Sá [Wed, 31 Aug 2022 03:55:47 +0000 (20:55 -0700)]
gpio: gpio-adp5588: drop the driver
With commit 9d2b2e83ef27 ("Input: adp5588-keys - support gpi key events as
'gpio keys'") the irchip functionality is directly supported in the input
driver as the main goal of these pins is to be used as gpio keys. Hence,
this driver can be removed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220829131553.690063-3-nuno.sa@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nuno Sá [Wed, 31 Aug 2022 03:54:10 +0000 (20:54 -0700)]
Input: adp5588-keys - support gpi key events as 'gpio keys'
This change replaces the support for GPIs as key event generators.
Instead of reporting the events directly, we add a gpio based irqchip
so that these events can be consumed by keys defined in the gpio-keys
driver (as it's goal is indeed for keys on GPIOs capable of generating
interrupts). With this, the gpio-adp5588 driver can also be dropped.
The basic idea is that all the pins that are not being used as part of
the keymap matrix can be possibly requested as GPIOs by gpio-keys
(it's also fine to use these pins as plain interrupts though that's not
really the point).
Since the gpiochip now also has irqchip capabilities, we should only
remove it after we free the device interrupt (otherwise we could, in
theory, be handling GPIs interrupts while the gpiochip is concurrently
removed). Thus the call 'adp5588_gpio_add()' is moved and since the
setup phase also needs to come before making the gpios visible, we also
need to move 'adp5588_setup()'.
While at it, always select GPIOLIB so that we don't need to use #ifdef
guards.
Andy Shevchenko [Tue, 30 Aug 2022 21:14:53 +0000 (14:14 -0700)]
Input: clps711x-keypad - get rid of OF_GPIO dependency
There is no such dependency in the driver, but it's implicitly
used to have OF property APIs available. Replace that by device
property API and get rid of OF_GPIO dependency.
Wolfram Sang [Tue, 23 Aug 2022 00:14:58 +0000 (17:14 -0700)]
Input: gameport - move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Wolfram Sang [Thu, 18 Aug 2022 22:05:06 +0000 (15:05 -0700)]
Input: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Chris Morgan [Tue, 16 Aug 2022 21:16:54 +0000 (14:16 -0700)]
Input: adc-joystick - add polled input device support
Add polled input device support to the adc-joystick driver. This is
useful for devices which do not have hardware capable triggers on
their SARADC. Code modified from adc-joystick.c changes made by Maya
Matuszczyk.
Chris Morgan [Tue, 16 Aug 2022 21:16:36 +0000 (14:16 -0700)]
dt-bindings: adc-joystick: add poll-interval
Add poll-interval support for the adc-joystick documentation. This is
an optional value and if not provided the adc-joystick works as it
does today (with buffers). If this value is provided, the adc-joystick
driver is polled at the specified interval. The existing attribute of
"poll-interval" was used instead of complying with property-units.yaml
after discussion of the issue on the mailing list.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20220816210440.14260-2-macroalpha82@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Eddie James [Fri, 12 Aug 2022 22:32:39 +0000 (15:32 -0700)]
Input: Add IBM Operation Panel driver
Add a driver to get the button events from the panel and provide
them to userspace with the input subsystem. The panel is
connected with I2C and controls the bus, so the driver registers
as an I2C slave device.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C slave parts Link: https://lore.kernel.org/r/20220809204147.238132-3-eajames@linux.ibm.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Eddie James [Fri, 12 Aug 2022 22:32:27 +0000 (15:32 -0700)]
dt-bindings: input: Add documentation for IBM Operation Panel
Document the bindings for the IBM Operation Panel, which provides
a simple interface to control a server. It has a display and three
buttons.
Also update MAINTAINERS for the new file.
Uwe Kleine-König [Mon, 15 Aug 2022 08:02:30 +0000 (10:02 +0200)]
i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Mon, 15 Aug 2022 08:02:29 +0000 (10:02 +0200)]
gpio: pca953x: Make platform teardown callback return void
All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.
This patch is a preparation for making i2c remove callbacks return void.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Mon, 15 Aug 2022 08:02:28 +0000 (10:02 +0200)]
leds: lm3601x: Improve error reporting for problems during .remove()
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are
called.
So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic
message.
This patch is a preparation for making i2c remove callbacks return void.
Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Mon, 15 Aug 2022 08:02:27 +0000 (10:02 +0200)]
leds: lm3601x: Don't use mutex after it was destroyed
The mutex might still be in use until the devm cleanup callback
devm_led_classdev_flash_release() is called. This only happens some time
after lm3601x_remove() completed.
Fixes: e63a744871a3 ("leds: lm3601x: Convert class registration to device managed") Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Uwe Kleine-König [Mon, 15 Aug 2022 08:02:26 +0000 (10:02 +0200)]
leds: lm3697: Remove duplicated error reporting in .remove()
Returning an error value from an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
As lm3697_remove() already emits an error message on failure and the
additional error message by the i2c core doesn't add any useful
information, don't pass the error value up the stack. Instead continue
to clean up and return 0.
This patch is a preparation for making i2c remove callbacks return void.
Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Linus Torvalds [Sun, 14 Aug 2022 16:22:11 +0000 (09:22 -0700)]
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Linus Torvalds [Sun, 14 Aug 2022 15:48:13 +0000 (08:48 -0700)]
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Linus Torvalds [Sun, 14 Aug 2022 00:31:18 +0000 (17:31 -0700)]
Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
David Howells [Wed, 10 Aug 2022 17:52:47 +0000 (18:52 +0100)]
afs: Enable multipage folio support
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Aug 2022 21:38:22 +0000 (14:38 -0700)]
Merge tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Linus Torvalds [Sat, 13 Aug 2022 21:24:12 +0000 (14:24 -0700)]
Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Linus Torvalds [Sat, 13 Aug 2022 21:00:45 +0000 (14:00 -0700)]
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Linus Torvalds [Sat, 13 Aug 2022 20:50:11 +0000 (13:50 -0700)]
Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
Linus Torvalds [Sat, 13 Aug 2022 20:41:48 +0000 (13:41 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Linus Torvalds [Sat, 13 Aug 2022 20:37:36 +0000 (13:37 -0700)]
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Linus Torvalds [Sat, 13 Aug 2022 20:28:54 +0000 (13:28 -0700)]
Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
Carsten Haitzler [Fri, 12 Aug 2022 12:16:28 +0000 (13:16 +0100)]
perf test: Refactor shell tests allowing subdirs
This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.
To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.
This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).
It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).
This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / mirror_ubuntu-kernels.git / log