Arnd Bergmann [Tue, 2 Jun 2020 17:12:35 +0000 (19:12 +0200)]
Merge tag 'keystone_dts_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: Keystone DTS updates for 5.7
Add display support for K2G EVM Board
* tag 'keystone_dts_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2g-evm: add HDMI video support
ARM: dts: keystone-k2g: Add DSS node
Arnd Bergmann [Thu, 28 May 2020 11:11:22 +0000 (13:11 +0200)]
Merge tag 'keystone_dts_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt
ARM: dts: Keystone update for v5.8
- Rename "msmram" node to "sram"
* tag 'keystone_dts_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: Rename "msmram" node to "sram"
ARM: dts: keystone: Rename "msmram" node to "sram"
The device node name should reflect generic class of a device so rename
the "msmram" node and its children to "sram". This will be also in sync
with upcoming DT schema. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Arnd Bergmann [Mon, 25 May 2020 22:23:39 +0000 (00:23 +0200)]
Merge tag 'imx-dt64-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree changes:
- New support of Beacon i.MX8m-Mini development kit.
- Add secondary cpus supply on imx8mm-evk and imx8mn-ddr4-evk for
completeness.
- Add thermal zones for imx8mp and lx2160a, PMIC thermal zone for
imx8qxp-mek board.
- Update VDD_ARM 1.2GHz setpoint voltage for imx8mn.
- Add SRC device interrupt for i.MX8 SoCs.
- Use 0.9V for VDD_GPU on imx8mq-librem5-devkit, since there is no need
to support overclocking to 1GHz.
- Update imx8qxp SCU device to use MU channel with less interrupt
triggering, one RX interrupt for a RX and one TX interrupt for a TX.
- Specify DMA channels for LS1028A DSPI controllers.
- Add QE and DS26522 device support for fsl-ls1043a-rdb board.
- Misc random update and cleanup.
* tag 'imx-dt64-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (25 commits)
arm64: dts: Add ds26522 node to dts to ls1043ardb
arm64: dts: add qe node to ls1043ardb
arm64: dts: ls1028a: sl28: keep switch port names consistent
arm64: dts: imx8mp: Add src node interrupts
arm64: dts: imx8mq: Add src node interrupts
arm64: dts: imx8m: assign clocks for A53
arm64: dts: freescale: sl28: enable LPUART1
arm64: dts: ls1043a-rdb: add compatible for board
arm64: dts: imx8mp: add "fsl,imx6sx-fec" compatible string
arm64: dts: imx8qxp-mek: Do not use underscore in node name
arm64: dts: fsl: add fsl,extts-fifo property for fman ptp
arm64: dts: imx8mn: Update VDD_ARM 1.2GHz setpoint voltage
arm64: dts: lx2160a: add more thermal zone support
arm64: dts: imx8qxp-mek: Add PMIC thermal zone support
arm64: dts: imx8qxp-mek: Sort labels alphabetically
arm64: dts: imx8mm: specify #sound-dai-cells for SAI nodes
arm64: dts: imx8qxp: support scu mailbox channel
arm64: dts: imx8mp: Add thermal zones support
arm64: dts: ls1012a: Add QSPI node properties
arm64: dts: imx: Add Beacon i.MX8m-Mini development kit
...
Arnd Bergmann [Mon, 25 May 2020 22:22:39 +0000 (00:22 +0200)]
Merge tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree changes for 5.8:
- A series from Anson Huang updating SRC devices to match bindings
schema definition.
- Correct CPU supply name and add cpu1 supply for i.MX7D.
- Convert thermal device to use nvmem interface to get fuse data
for imx6qdl and imx6sl.
- A series from Tim Harvey to update imx6qdl-gw devices, adding support
of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc.
- Add input MUX for ENET2 MDIO into IMX7D pin functions.
- Misc random device addition or update.
* tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter
ARM: dts: imx5: make src node name generic
ARM: dts: imx50: Add src node interrupt
ARM: dts: imx: make src node name generic
ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio
ARM: dts: imx6sl: Use nvmem interface to get fuse data
ARM: dts: imx6qdl: Use nvmem interface to get fuse data
ARM: dts: imx6qdl-gw5910: fix wlan regulator
ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt
ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support
ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support
ARM: dts: imx53: Add src node interrupt
ARM: dts: imx51: Add src node interrupt
ARM: dts: imx50: Remove unused iomuxc-gpr node
ARM: dts: imx6qdl-gw552x: add USB OTG support
ARM: dts: imx6-sr-som: add ethernet PHY configuration
arm: dts: ls1021atwr: Add QSPI node properties
ARM: dts: e60k02: add interrupt for PMIC
ARM: dts: colibri: introduce device trees with UHS-I support
ARM: dts: imx7d: Add cpu1 supply
...
Arnd Bergmann [Mon, 25 May 2020 22:21:15 +0000 (00:21 +0200)]
Merge tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.8-rc1
This contains a couple of fixes for minor issues, enables XUDC support
on Tegra194, and enables EMC frequency scaling and video capture on
Tegra210.
* tag 'tegra-for-5.8-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
arm64: tegra: Make the RTC a wakeup source on Jetson TX2
arm64: tegra: Enable VI I2C on Jetson Nano
arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
arm64: tegra: Add Tegra VI CSI support in device tree
arm64: tegra: Add reset-cells to memory controller
arm64: tegra: Fix SOR powergate clocks and reset
arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
arm64: tegra: Hook up EMC cooling device
arm64: tegra: Add external memory controller node for Tegra210
arm64: tegra: Add XUDC node on Tegra194
arm64: tegra: Kill off "simple-panel" compatibles
Arnd Bergmann [Mon, 25 May 2020 22:20:16 +0000 (00:20 +0200)]
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.8
Highlights:
- new boards :Beelink GT-King Pro (G12B SoC), Smartlabs SML-5442TW
(S905D), Hardkernel ODROID-C4 (SM1)
- audio: support for GX-family SoCs
- audio: internal DAC support
- use the new USB control driver for GXL and GXM
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (33 commits)
arm64: dts: meson-g12b-gtking-pro: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
arm64: dts: meson-g12b-gtking: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
arm64: dts: meson: add ethernet interrupt to wetek dtsi
arm64: dts: meson: add support for the Smartlabs SML-5442TW
dt-bindings: arm: amlogic: add support for the Smartlabs SML-5442TW
dt-bindings: add vendor prefix for Smartlabs LLC
arm64: dts: meson: g12: add internal DAC glue
arm64: dts: meson: g12: add internal DAC
arm64: dts: meson: libretech-pc: add internal DAC support
arm64: dts: meson: libretech-ac: add internal DAC support
arm64: dts: meson: libretech-cc: add internal DAC support
arm64: dts: meson: p230-q200: add internal DAC support
arm64: dts: meson: gxl: add acodec support
arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4
dt-bindings: arm: amlogic: add odroid-c4 bindings
arm64: dts: meson-sm1: add cpu thermal nodes
arm64: dts: meson-g12b: move G12B thermal nodes to meson-g12b.dtsi
...
Arnd Bergmann [Mon, 25 May 2020 22:19:42 +0000 (00:19 +0200)]
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.8
- eth PHY and USB PHY updates
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id"
ARM: dts: meson: Add the Ethernet "timing-adjustment" clock
ARM: dts: meson8m2: Use the Meson8m2 specific USB2 PHY compatible
ARM: dts: meson: add the gadget mode properties to the USB0 controller
Jon Hunter [Wed, 20 May 2020 15:13:18 +0000 (16:13 +0100)]
arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
The RTC found on the MAX77620 PMIC can be used as a wakeup source on
Jetson Nano and TX1, which is useful to wake the system from suspend
at a given time.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Arnd Bergmann [Thu, 21 May 2020 21:37:22 +0000 (23:37 +0200)]
Merge branch 'mmp/fixes' into arm/dt
These were queued for v5.7 as bugfixes, merge them
here as well to resolve the conflicts.
* mmp/fixes:
ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy
ARM: dts: mmp3-dell-ariel: Fix the SPI devices
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.
Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.
ARM: dts: mmp3: Use the MMP3 compatible string for /clocks
Clocks are in fact slightly different on MMP3. In particular, PLL2 is
fixed to a different frequency, there's an extra PLL3, and the GPU
clocks are configured differently.
The node name preferred by mmc-controller.yaml binding spec is "mmc":
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab0800: $nodename:0:
'sdhci@ab0800' does not match '^mmc(@.*)?$'
berlin2-sony-nsz-gs7.dt.yaml: sdhci@ab1000: $nodename:0:
'sdhci@ab1000' does not match '^mmc(@.*)?$'
berlin2cd-google-chromecast.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2cd-valve-steamlink.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab0000: $nodename:0:
'sdhci@ab0000' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab0800: $nodename:0:
'sdhci@ab0800' does not match '^mmc(@.*)?$'
berlin2q-marvell-dmp.dt.yaml: sdhci@ab1000: $nodename:0:
'sdhci@ab1000' does not match '^mmc(@.*)?$'
There are better generic ones and the validation is going to complain:
mmp3-dell-ariel.dt.yaml: hsic@f0001000: $nodename:0: 'hsic@f0001000'
does not match '^usb(@.*)?'
mmp3-dell-ariel.dt.yaml: hsic@f0002000: $nodename:0: 'hsic@f0002000'
does not match '^usb(@.*)?'
...
mmp3-dell-ariel.dt.yaml: l2-cache-controller@d0020000: $nodename:0:
'l2-cache-controller@d0020000' does not match
'^(cache-controller|cpu)(@[0-9a-f,]+)*$'
Arnd Bergmann [Thu, 21 May 2020 21:14:10 +0000 (23:14 +0200)]
Merge tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New soc variant the rk3326 which is essentially a px30 with only one
display controller and a new board using it, the Odroid Advance Go.
sdcard regulator for the rockpro64 and a lot of devicetree fixes
making the dt-binding check a lot happier.
* tag 'v5.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits)
arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2
arm64: dts: rockchip: fix pd_tcpc0 and pd_tcpc1 node position on rk3399
arm64: dts: rockchip: add bus-width properties to mmc nodes for px30
arm64: dts: rockchip: remove disable-wp from rk3308-roc-cc emmc node
arm64: dts: rockchip: rename and label gpio-led subnodes
arm64: dts: rockchip: fix defines in pd_vio node for rk3399
arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-orangepi
arm64: dts: rockchip: fix rtl8211e nodename for rk3399-orangepi
arm64: dts: rockchip: fix &pinctrl phy sub nodename for rk3399-nanopi4
arm64: dts: rockchip: fix rtl8211e nodename for rk3399-nanopi4
arm64: dts: rockchip: fix rtl8211f nodename for rk3328 Beelink A1
arm64: dts: rockchip: fix phy nodename for rk3328
include: dt-bindings: rockchip: remove unused defines
arm64: dts: rockchip: replace RK_FUNC defines in rk3326-odroid-go2
arm64: dts: rockchip: Define the rockchip Video Decoder node on rk3399
arm64: dts: rockchip: remove #sound-dai-cells from &spdif node of rk3399-hugsun-x99.dts
arm64: dts: rockchip: remove #sound-dai-cells from &i2s1 node of rk3399-pinebook-pro.dts
arm64: dts: rockchip: add Odroid Advance Go
dt-bindings: Add binding for Hardkernel Odroid Go Advance
arm64: dts: rockchip: add core devicetree for rk3326
...
Arnd Bergmann [Thu, 21 May 2020 21:07:21 +0000 (23:07 +0200)]
Merge tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno/Vexpress/Fast Models updates for v5.8
Various miscellaneous device tree source fixes to make them fully
binding compliant. It includes fixing various device node names,
order of interrupt properties, compatible names, address and size
cell fields and their aligment with children nodes as well as
moving some fixed devices out of bus node.
* tag 'juno-updates-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Fix SCPI shared mem node name
arm64: dts: vexpress: Fix VExpress LED names
arm64: dts: juno: Fix GPU interrupt order
arm64: dts: fvp/juno: Fix bus node names
arm64: dts: fvp: Fix SMMU DT node
arm64: dts: fvp/juno: Fix serial node names
arm64: dts: juno: Use proper DT node name for USB
arm64: dts: fvp: Fix ITS node names and #msi-cells
arm64: dts: fvp: Fix GIC child nodes
arm64: dts: juno: Fix GIC child nodes
arm64: dts: fvp: Fix GIC compatible names
arm64: dts: juno: Fix mem-timer
arm64: dts: juno: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed clocks out of bus node
arm64: dts: vexpress: Move fixed devices out of bus node
arm64: dts: fvp: Move fixed devices out of bus node
arm64: dts: fvp/juno: Fix node address fields
Arnd Bergmann [Thu, 21 May 2020 20:50:40 +0000 (22:50 +0200)]
Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.8
For SDM845 this defines the IPA network accelerator and the CCI camera
control bus, it defines the required UFS reset and adds WiFi for the
Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251
camera nodes for DB845c.
For SC7180 it adds GPU support, defines the modem remoteproc, adds the
IPA network accelerator, Coresight and ETM support, adds cpuidle low
power states and updates the CPUs' compatible.
For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and
adds voltage corners, it defines the nodes for UFS PHY and controller
and finally corrects a typo in the PDC node to make SPMI functional.
For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control
interface bus is added and Coresight is disabled by default to match
some product configurations. The Samsung A3U gained display support and
Samsung A5U gained touchscreen support.
MSM8996 now property describes the power supply chain for the GPU, the
CCI camera control interface bus is added and the DB820c has the
regulators of the secondary PMIC defined.
For QCS404 USB PHYs and controllers are defined and wired up for the
EVB.
SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7
defined.
It also contains a number of changes throughout to improve DT binding
compliance.
* tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits)
arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges
arm64: dts: qcom: sc7180: add IPA information
arm64: dts: qcom: sc7180: Fix ETMv4 power management patch
arm64: dts: qcom: sc7180: Add A618 gpu dt blob
dt-bindings: arm-smmu: Add sc7180 compatible string
arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC
arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc
arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi
arm64: dts: qcom: msm8916: move gpu opp table to gpu node
arm64: dts: qcom: msm8916: avoid using _ in node names
arm64: dts: qcom: c630: Specify UFS device reset
arm64: dts: qcom: c630: Add WiFi node
arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel
arm64: dts: qcom: db820c: Fix invalid pm8994 supplies
arm64: dts: qcom: db820c: Add pmi8994 RPM regulators
arm64: dts: qcom: msm8916: Disable coresight by default
arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area
arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen
arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator
arm64: dts: qcom: msm8916: Add blsp_i2c5
...
Arnd Bergmann [Thu, 21 May 2020 20:49:06 +0000 (22:49 +0200)]
Merge tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for 5.8
- New board: Microchip SAMA5D2 Industrial Connectivity Platform
- All SoCs are now converted to the new PMC device tree binding
- sama5d2 flexcom nodes are now fully described in sama5d2.dtsi
* tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (35 commits)
ARM: dts: at91: sama5d2_xplained: Add aliases for the dedicated I2C IPs
ARM: dts: at91: Configure I2C SCL gpio as open drain
ARM: dts: at91: sama5d2_xplained: Describe the flx0 I2C function
ARM: dts: at91: sama5d2_ptc_ek: Add comments to describe the aliases
ARM: dts: at91: sama5d2_xplained: Add alias for DBGU
ARM: dts: at91: sama5d2: Add missing flexcom definitions
ARM: dts: at91: sama5d2: Remove i2s and tcb aliases from SoC dtsi
ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and I2C flx0 functions
ARM: dts: at91: sama5d2: Add DMA bindings for the flx1 I2C function
ARM: dts: at91: sama5d2: Add DMA bindings for the flx3 SPI function
ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions
ARM: dts: at91: sama5d2: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sama5d2: Move flx0 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx2 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Move flx4 definitions in the SoC dtsi
ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions
ARM: dts: at91: sama5d27_wlsom1: Add alias for i2c0
ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP
...
Arnd Bergmann [Thu, 21 May 2020 20:41:59 +0000 (22:41 +0200)]
Merge tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
MT2712:
- replace deprecated compatible for the usb PHY
MT6797:
- switch to SPDX identifier
- add and enable I2C device for x20 development board
- add I2C compatible to the binding description
MT7622:
- add Wi-Fi device and enable it for the Bananpi-R64
MT8173:
- add CPU capacities based on Dhryston benchmark
- fix DT build warnings
- set throtteling range to limitless
- add Elm and Hana devices on which several chromebooks are based
- add Global Command Queue entries to the users
MT8183:
- split cpuidle states in two as the clusters have different target residencies
* tag 'v5.7-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8173: Add capacity-dmips-mhz attributes
arm64: dts: mt2712: use non-empty ranges for usb-phy
arm64: dts: mt8173: fix mdp aliases property name
arm64: dts: mediatek: Switch to SPDX license identifier for MT6797 SoC
arm64: dts: mediatek: Enable I2C support for 96Boards X20 Development board
arm64: dts: mediatek: Add I2C support for MT6797 SoC
dt-bindings: i2c: Document I2C controller binding for MT6797 SoC
arm64: dts: mt8173: fix cooling device range
arm64: dts: mediatek: add mt8173 elm and hana board
arm64: dts: mt8173: fix unit name warnings
arm64: dts: mt8173: add uart aliases
dt-bindings: arm64: dts: mediatek: Add mt8173 elm and hana
arm64: dts: mt8183: adjust cpuidle target residency
arm64: dts: mt8173: Add gce setting in mmsys and display node
arm64: dts: mt7622: add built-in Wi-Fi device nodes
Arnd Bergmann [Thu, 21 May 2020 20:39:46 +0000 (22:39 +0200)]
Merge tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.8
- Leave the FPGA bridges disabled in base dtsi
- Add fpga2hps and fpga2sdram bridges on base Cyclone5/Arria5 dtsi
* tag 'socfpga_dts_update_for_v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add fpga2hps and fpga2sdram bridges
ARM: dts: socfgpa: set bridges status to disabled
Arnd Bergmann [Thu, 21 May 2020 20:35:34 +0000 (22:35 +0200)]
Merge tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- Support for the IOMMU on the H6
- Support for cpufreq / thermal throttling on the H6
- Support for the mailbox on the A64, A83t, H3, H5 and H6
- New boards: A20-OLinuXino-LIME-eMMC
* tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits)
arm64: dts: allwinner: h6: Add IOMMU
arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6
arm64: dts: allwinner: h6: add voltage range to OPP table
arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells
arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64
arm64: dts: allwinner: Sort Pine H64 device-tree nodes
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1
arm64: dts: allwinner: h6: Add CPU Operating Performance Points table
arm64: dts: allwinner: h6: Add thermal trip points/cooling map
arm64: dts: allwinner: h6: Add clock to CPU cores
arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module
arm64: dts: allwinner: h6: orangepi: Disable OTG mode
arm64: dts: allwinner: h6: orangepi: Add gpio power supply
ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity
arm64: dts: allwinner: h6: Add msgbox node
arm64: dts: allwinner: a64: Add msgbox node
ARM: dts: sunxi: h3/h5: Add msgbox node
ARM: dts: sunxi: a83t: Add msgbox node
ARM: dts: sun8i-h3: add opp table for mali gpu
...
Arnd Bergmann [Thu, 21 May 2020 20:34:59 +0000 (22:34 +0200)]
Merge tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Device tree changes for v5.8-rc1
This contains a bit of cleanup and CPU frequency scaling support for the
Tegra30 Beaver board.
* tag 'tegra-for-5.8-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: dts: tegra30: beaver: Add CPU Operating Performance Points
ARM: dts: tegra30: beaver: Set up voltage regulators for DVFS
ARM: tegra: Kill off "simple-panel" compatibles
Arnd Bergmann [Thu, 21 May 2020 20:30:18 +0000 (22:30 +0200)]
Merge tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v5.8-rc1
This adds bindings for the CSI TPG clock on Tegra210, moves various
clocks from the clock and reset controller to the PMC where their
controls really are, adds bindings for the external memory controller
and video capture controller on Tegra210, as well as CPU frequency
scaling on Tegra20 and Tegra30.
* tag 'tegra-for-5.8-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: i2c: tegra: Document Tegra210 VI I2C
dt-bindings: tegra: Add VI and CSI bindings
dt-bindings: cpufreq: Add binding for NVIDIA Tegra20/30
dt-bindings: memory: tegra: Add external memory controller binding for Tegra210
dt-bindings: clock: tegra: Remove PMC clock IDs
dt-bindings: clock: tegra: Add clock ID for CSI TPG clock
Arnd Bergmann [Thu, 21 May 2020 14:02:11 +0000 (16:02 +0200)]
Merge tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.8 (take two)
- Initial support for the Renesas RZ/G1H SoC on the iWave RainboW
Qseven SOM (G21M) and board (G21D),
- Support for the AISTARVISION MIPI Adapter V2.1 camera board on the
Silicon Linux EK874 RZ/G2E evaluation kit.
* tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1
ARM: dts: r8a7742: Add GPIO nodes
ARM: dts: r8a7742: Add [H]SCIF{A|B} support
ARM: dts: r8a7742: Add IRQC support
ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H
ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM
ARM: dts: r8a7742: Initial SoC device tree
clk: renesas: Add r8a7742 CPG Core Clock Definitions
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
Arnd Bergmann [Thu, 21 May 2020 14:00:46 +0000 (16:00 +0200)]
Merge tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.8, round 1
Highlights:
----------
MCU part:
-fix a typo for DAC io-channel-cells on f429 and h743
MPU part:
-Generic:
-Bump tp PSCI 1.0
-Fix a typo for DAC io-channel-cells
-Add M4 pdds for deep sleep mode
-Add I2C fatmode plus support
-Add new Octavio lxa-mc1 board based on OSDMP15x SiP
-Add new Stinger96 board support. It is a 96Boards IoT Extended board
based on stm32mp157a SoC. Some figures: 256MB DDR, 125MB and flash,
Onboard BG96 modem...
-Add IoT Box board support based on stinger96 board + Wifi/BT, CCS811
VOC sensor, 2 digitals microphones ...
-DH:
-Adapt dhcom-som and dhcom-pdk2 dts(i) files to STM32MP15 SoC diversity
-Add GPIO led and GPIO keys support on PDK2 board
-AV96:
-Major rework to support official avenger96 board based on DHCOR SOM.
-Prototype board is no more supported
* tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (58 commits)
ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board
ARM: dts: stm32: Split SoC-independent parts of DHCOM SOM and PDK2
ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2
ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2
ARM: dts: stm32: Add IoT Box board support
dt-bindings: arm: stm32: Document IoT Box compatible
ARM: dts: stm32: Add Stinger96 board support
dt-bindings: arm: stm32: Document Stinger96 compatible
ARM: dts: stm32: Add missing pinctrl entries for STM32MP15
dt-bindings: Add vendor prefix for Shiratech Solutions
ARM: dts: stm32: Add bindings for SPI2 on AV96
ARM: dts: stm32: Add alternate pinmux for SPI2 pins
ARM: dts: stm32: Add bindings for ADC on AV96
ARM: dts: stm32: Add alternate pinmux for ADC pins
ARM: dts: stm32: Add bindings for FDCAN2 on AV96
ARM: dts: stm32: Add alternate pinmux for FDCAN2 pins
ARM: dts: stm32: Add bindings for FDCAN1 on AV96
ARM: dts: stm32: Add alternate pinmux for FDCAN1 pins
ARM: dts: stm32: Repair I2C2 operation on AV96
ARM: dts: stm32: Add alternate pinmux for I2C2 pins
...
Arnd Bergmann [Thu, 21 May 2020 13:51:39 +0000 (15:51 +0200)]
Merge tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.8
1. Add DTS for Exynos4210-based Samsung Galaxy S2 (GT-I9100)
mobile phone,
2. Enable WiFi and Bluetooth in multiple boards,
3. Add new features to S5Pv210-based Aries family of mobile phones
(e.g. Samsung Galaxy S): necessary configuration for suspend, audio
support, USB mux, touch keys, panel, i2c-gpio adapters, FM radio, ADC,
4. Many minor fixes (e.g. GPIO polarity, interrupts).
* tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
ARM: dts: s5pv210: Set MAX8998 GPIO pulls on Aries boards
ARM: dts: s5pv210: Correct FIMC definitions
ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards
ARM: dts: s5pv210: Enable ADC on Aries boards
ARM: dts: s5pv210: Add an ADC node
ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards
ARM: dts: s5pv210: Add si470x FM radio to Galaxy S
ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards
ARM: dts: s5pv210: Add panel support to Aries boards
ARM: dts: s5pv210: Add touchkey support to Aries boards
ARM: dts: s5pv210: Add FSA9480 support to Aries boards
ARM: dts: s5pv210: Add WM8994 support to Aries boards
ARM: dts: s5pv210: Disable pulls on GPIO I2C adapters for Aries
ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries
ARM: dts: s5pv210: Correct gpi pinctrl node name
ARM: dts: s5pv210: Add sleep GPIO configuration for Galaxy S
ARM: dts: s5pv210: Add sleep GPIO configuration for Fascinate4G
ARM: dts: s5pv210: Add helper define for sleep gpio config
ARM: dts: exynos: Enable WLAN support for the UniversalC210 board
ARM: dts: exynos: Enable WLAN support for the Rinato board
...
Arnd Bergmann [Thu, 21 May 2020 13:45:59 +0000 (15:45 +0200)]
Merge tag 'arm-soc/for-5.8/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for v5.8, please pull the following:
- Nicolas updates the Raspberry Pi 4 board DTS to include the GPIO
controlling power to the SD card, adds support for the vmmc regulator
for the emmc2 controller and finally updates the power management
provider for V3D to use the firmware to solve instabilities.
* tag 'arm-soc/for-5.8/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Use firmware PM driver for V3D
ARM: dts: bcm2711: Add vmmc regulator in emmc2
ARM: dts: bcm2711: Update expgpio's GPIO labels
Arnd Bergmann [Thu, 21 May 2020 13:43:45 +0000 (15:43 +0200)]
Merge tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.8
- Add pinconf for spi2 and spi3 nodes and increase the drive
strength to achieve the max speed for the Hikey960 board
- Add CTI nodes for the Hikey620 board
* tag 'hisi-arm64-dt-for-5.8' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi6220: Add CTI options
arm64: dts: hikey960: pinctrl: Fix spi2/spi3 pinconf
Arnd Bergmann [Thu, 21 May 2020 10:34:22 +0000 (12:34 +0200)]
Merge tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt
Realtek Arm based SoC DT for v5.8
Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box.
Clean up memory nodes and /soc ranges. Factor out r-bus and partition it
into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks.
* tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: (35 commits)
dt-bindings: reset: rtd1295: Add SB2 reset
arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes
ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes
arm64: dts: realtek: rtd16xx: Add CRT syscon node
ARM: dts: rtd1195: Add UART resets
ARM: dts: rtd1195: Add reset nodes
dt-bindings: reset: Add Realtek RTD1195
ARM: dts: rtd1195: Add CRT syscon node
arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon
arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon
arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon
ARM: dts: rtd1195: Introduce iso and misc syscon
arm64: dts: realtek: rtd1295: Add Xnano X5
dt-bindings: arm: realtek: Add Xnano X5
dt-bindings: vendor-prefixes: Add Xnano
arm64: dts: realtek: rtd16xx: Add memory reservations
arm64: dts: realtek: rtd16xx: Carve out boot ROM from memory
arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB
...
Arnd Bergmann [Thu, 21 May 2020 10:03:23 +0000 (12:03 +0200)]
Merge tag 'omap-for-v5.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
DTS changes for omaps for v5.8 merge window
We add support for beaglebone-ai board that's am5729 based devices.
Then we have a series changes to configure more hardware acceletators found
on omap variants. With the recent ti-sysc related changes, we can now better
configure the accelerators with help of the clock framework and reset driver.
So with a series of changes from Suman Anna and Tero Kristo, let's configure
IPUs and DSPs for dra7 devices like beagle-x15. And let's also configure the
missing crypto accelerators for omap5 as those have been missing.
Note that there are still some pending driver related patches to use IPU and
DSP related features with mainline kernel, but those are independent of the
devicetree changes.
Then there is a display related change for am57xx-idk for tc358778 bridge,
and a change to configure the missing clock source for some PWM timers.
* tag 'omap-for-v5.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits)
ARM: OMAP5: Make L4SEC clock domain SWSUP only
ARM: OMAP4: Make L4SEC clock domain SWSUP only
ARM: dts: omap5: add DES crypto accelerator node
ARM: dts: omap5: add SHA crypto accelerator node
ARM: dts: omap5: add aes2 entry
ARM: dts: omap5: add aes1 entry
ARM: dts: dra7-ipu-dsp-common: Add watchdog timers to IPU and DSP nodes
ARM: dts: am571x-idk: Add CMA pools and enable IPUs & DSP1 rprocs
ARM: dts: am572x-idk-common: Add CMA pools and enable IPU & DSP rprocs
ARM: dts: beagle-x15-common: Add CMA pools and enable IPU & DSP rprocs
ARM: dts: dra76-evm: Add CMA pools and enable IPU & DSP rprocs
ARM: dts: dra71-evm: Add CMA pools and enable IPUs & DSP1 rprocs
ARM: dts: dra72-evm-revc: Add CMA pools and enable IPUs & DSP1 rprocs
ARM: dts: dra72-evm: Add CMA pools and enable IPUs & DSP1 rprocs
ARM: dts: dra7-evm: Add CMA pools and enable IPU & DSP rprocs
ARM: dts: dra7-ipu-dsp-common: Add timers to IPU and DSP nodes
ARM: dts: dra7-ipu-dsp-common: Add mailboxes to IPU and DSP nodes
ARM: dts: dra7-ipu-dsp-common: Move mailboxes into common files
ARM: dts: DRA72x: Add aliases for rproc nodes
ARM: dts: DRA74x: Add aliases for rproc nodes
...
Arnd Bergmann [Thu, 21 May 2020 09:53:19 +0000 (11:53 +0200)]
Merge tag 'versatile-dts-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt
Versatile DTS updates for the v5.8 kernel:
Create a new device tree for the Integrator/AP with the
IM-PD1 expansion module fitted in the first slot.
If we want to augment the slot where it is sitting, we can
alter the device tree or make the bootloader do so.
* tag 'versatile-dts-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Add devicetree for Integrator/AP with IM-PD1
Johan Jonker [Tue, 19 May 2020 11:14:44 +0000 (13:14 +0200)]
arm64: dts: rockchip: fix pinctrl-names for gpio-leds node on rk3326-odroid-go2
The 'pinctrl-names' property should contain a list of names
to the assigned states. The value 'led_pins' in the gpio-leds
node on rk3326-odroid-go2 is not a state that is normally used,
so change it the common name 'default'.
Christian Hewitt [Wed, 20 May 2020 01:43:25 +0000 (01:43 +0000)]
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.
Thierry Reding [Fri, 7 Jun 2019 14:00:20 +0000 (16:00 +0200)]
arm64: tegra: Enable VI I2C on Jetson Nano
Enable the VI I2C so that the peripherals connected to it (such as the
camera connector, an INA3221 power monitor and the USB 3.1 4-port hub)
can be accessed.
Jon Hunter [Thu, 7 May 2020 10:13:49 +0000 (11:13 +0100)]
arm64: tegra: Allow the PMIC RTC to wakeup Jetson Xavier
The PMIC RTC is currently unable to wakeup Tegra194 on the Jetson Xavier
platform because the interrupt from the PMIC is not usin the PMC as the
interrupt parent but the GIC directly. Update the PMIC interrupt to use
the PMC as the interrupt parent so that the PMIC RTC alarms can wakeup
the device.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Jon Hunter [Fri, 1 May 2020 07:27:56 +0000 (08:27 +0100)]
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.
If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.
Fixes: f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
The external memory controller can be used as a cooling device for the
LPDDR chips. Hook it up to the "mem" thermal zone of the SOCTHERM block
so that temperature polling can be enabled on the EMC when a given
temperature is exceeded.
Matthias Brugger [Mon, 18 May 2020 11:31:56 +0000 (13:31 +0200)]
arm64: dts: mt6797: Fix mmsys node name
Node names are supposed to match the class of the device. The
mmsys node is a syscon as it provides more then just a clock controller.
Update the name.
Node names are supposed to match the class of the device, mmsys is a
system controller (syscon) not a clock controller, so change the node
name accordingly.
Anson Huang [Thu, 14 May 2020 01:08:48 +0000 (09:08 +0800)]
ARM: dts: imx6sl: Use nvmem interface to get fuse data
Although ocotp clock is always ON for i.MX6SL, OCOTP can be
accessed directly, but since i.MX6SL nvmem interface is supported,
and fsl,tempmon-data is deprecated, use it instead of getting fuse
data by reading ocotp directly, this makes all i.MX6 SoCs aligned.
Anson Huang [Thu, 14 May 2020 01:08:47 +0000 (09:08 +0800)]
ARM: dts: imx6qdl: Use nvmem interface to get fuse data
Although ocotp clock is always ON for i.MX6QDL, OCOTP can be
accessed directly, but since i.MX6QDL nvmem interface is supported,
and fsl,tempmon-data is deprecated, use it instead of getting fuse
data by reading ocotp directly, this makes all i.MX6 SoCs aligned.
Tim Harvey [Tue, 12 May 2020 21:54:15 +0000 (14:54 -0700)]
ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt
The Sterling-LWB has a BCM4330 which has a UART based bluetooth
HCI. Add support for binding to the bcm_hci driver to take care
of handling the shutdown gpio and loading firmware.
Because the shutdown gpio is more of an enable than a regulator
go ahead and replace the regulator with a shutdown-gpio.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>