David Ahern [Thu, 13 Aug 2015 20:59:02 +0000 (14:59 -0600)]
net: Use VRF device index for lookups on TX
As with ingress use the index of VRF master device for route lookups on
egress. However, the oif should only be used to direct the lookups to a
specific table. Routes in the table are not based on the VRF device but
rather interfaces that are part of the VRF so do not consider the oif for
lookups within the table. The FLOWI_FLAG_VRFSRC is used to control this
latter part.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 13 Aug 2015 20:59:01 +0000 (14:59 -0600)]
net: Use VRF device index for lookups on RX
On ingress use index of VRF master device for route lookups if real device
is enslaved. Rules are expected to be installed for the VRF device to
direct lookups to a specific table.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 13 Aug 2015 20:59:00 +0000 (14:59 -0600)]
net: Introduce VRF related flags and helpers
Add a VRF_MASTER flag for interfaces and helper functions for determining
if a device is a VRF_MASTER.
Add link attribute for passing VRF_TABLE id.
Add vrf_ptr to netdevice.
Add various macros for determining if a device is a VRF device, the index
of the master VRF device and table associated with VRF device.
Signed-off-by: Shrijeet Mukherjee <shm@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Thu, 13 Aug 2015 19:26:35 +0000 (15:26 -0400)]
net: addr IFLA_OPERSTATE to netlink message for ipv6 ifinfo
This is useful information to include in ipv6 netlink messages that
report interface information. IFLA_OPERSTATE is already included in
ipv4 messages, but missing for ipv6. This closes that gap.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sasha Levin [Thu, 13 Aug 2015 18:03:16 +0000 (14:03 -0400)]
net: allow sleeping when modifying store_rps_map
Commit 10e4ea751 ("net: Fix race condition in store_rps_map") has moved the
manipulation of the rps_needed jump label under a spinlock. Since changing
the state of a jump label may sleep this is incorrect and causes warnings
during runtime.
Make rps_map_lock a mutex to allow sleeping under it.
Fixes: 10e4ea751 ("net: Fix race condition in store_rps_map") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 14 Aug 2015 04:31:14 +0000 (21:31 -0700)]
Merge branch 'mv88e6xxx-hw-vlan'
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: add hardware VLAN support
This patchset brings support to access hardware VLAN entries in DSA and
mv88e6xxx, through switchdev VLAN objects.
In the following example, ports swp[0-2] belong to bridge br0, and ports
swp[3-4] belong to bridge br1. Here's an example of what can be achieved
after this patchset:
# bridge vlan add dev swp1 vid 100 master
# bridge vlan add dev swp2 vid 100 master
# bridge vlan add dev swp3 vid 100 master
# bridge vlan add dev swp4 vid 100 master
# bridge vlan del dev swp1 vid 100 master
The above commands correctly programmed hardware VLAN 100 for port swp2,
while ports swp3 and swp4 use software VLAN 100, as shown with:
Vivien Didelot [Thu, 13 Aug 2015 16:52:21 +0000 (12:52 -0400)]
net: dsa: mv88e6xxx: add VLAN Purge support
Add support for the VTU Load Purge operation and implement the
port_vlan_del driver function to remove a port from a VLAN entry, and
delete the VLAN if the given port was its last member.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 13 Aug 2015 16:52:20 +0000 (12:52 -0400)]
net: dsa: mv88e6xxx: add VLAN support to FDB dump
Add an helper function to read the next valid VLAN entry for a given
port. It is used in the VID to FID conversion function to retrieve the
forwarding database assigned to a given VLAN port.
Finally update the FDB getnext operation to iterate on the next valid
port VLAN when the end of the current database is reached.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 13 Aug 2015 16:52:19 +0000 (12:52 -0400)]
net: dsa: mv88e6xxx: add VLAN Get Next support
Implement the port_pvid_get and vlan_getnext driver functions required
to dump VLAN entries from the hardware, with the VTU Get Next operation.
Some functions and structure will be shared with STU operations, since
their table format are similar (e.g. STU data entries are accessible
with the same registers as VTU entries, except with an offset of 2).
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Thu, 13 Aug 2015 16:52:17 +0000 (12:52 -0400)]
net: dsa: add support for switchdev VLAN objects
Add new functions in DSA drivers to access hardware VLAN entries through
SWITCHDEV_OBJ_PORT_VLAN objects:
- port_pvid_get() and vlan_getnext() to dump a VLAN
- port_vlan_del() to exclude a port from a VLAN
- port_pvid_set() and port_vlan_add() to join a port to a VLAN
The DSA infrastructure will ensure that each VLAN of the given range
does not already belong to another bridge. If it does, it will fallback
to software VLAN and won't program the hardware.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Thu, 13 Aug 2015 14:39:01 +0000 (10:39 -0400)]
net: ipv6 sysctl option to ignore routes when nexthop link is down
Like the ipv4 patch with a similar title, this adds a sysctl to allow
the user to change routing behavior based on whether or not the
interface associated with the nexthop was an up or down link. The
default setting preserves the current behavior, but anyone that enables
it will notice that nexthops on down interfaces will no longer be
selected:
When the above sysctls are set, not only will link status be reported to
userspace, but an indication that a nexthop is dead and will not be used
is also reported.
1000::/8 via 7000::2 dev p7p1 metric 1024 dead linkdown pref medium
1000::/8 via 8000::2 dev p8p1 metric 1024 pref medium
7000::/8 dev p7p1 proto kernel metric 256 dead linkdown pref medium
8000::/8 dev p8p1 proto kernel metric 256 pref medium
9000::/8 via 8000::2 dev p8p1 metric 2048 pref medium
9000::/8 via 7000::2 dev p7p1 metric 1024 dead linkdown pref medium
fe80::/64 dev p7p1 proto kernel metric 256 dead linkdown pref medium
fe80::/64 dev p8p1 proto kernel metric 256 pref medium
This also adds devconf support and notification when sysctl values
change.
v2: drop use of rt6i_nhflags since it is not needed right now
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Thu, 13 Aug 2015 14:39:00 +0000 (10:39 -0400)]
net: track link status of ipv6 nexthops
Add support to track current link status of ipv6 nexthops to match
recent changes that added support for ipv4 nexthops. This takes a
simple approach to track linkdown status for next-hops and simply
checks the dev for the dst entry and sets proper flags that to be used
in the netlink message.
v2: drop use of rt6i_nhflags since it is not needed right now
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Handle TRACE_PKT, stack can sniff them on the first port
Add debubfs enrty to configure tracing for offload traffic like iWARP
& iSCSI for debugging purpose.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Thu, 13 Aug 2015 01:45:25 +0000 (18:45 -0700)]
rocker: hook ndo_neigh_destroy to cleanup neigh refs in driver
Rocker driver tracks arp_tbl neighs to resolve IPv4 route nexthops. The
driver uses NETEVENT_NEIGH_UPDATE for neigh adds and updates, but there is
no event when the neigh is removed from the device (such as when the device
goes admin down). This patches hooks ndo_neigh_destroy so the driver can
know when a neigh is removed from the device. In response, the driver will
purge the neigh entry from its internal tbl.
I didn't find an in-tree users of ndo_neigh_destroy, so I'm not sure if
this ndo is vestigial or if there are out-of-tree users. In any case, it
does what I need here. An alternative design would be to generate
NETEVENT_NEIGH_UPDATE event when neigh is being destroyed, setting state to
NUD_NONE so driver knows neigh entry is dead.
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 13 Aug 2015 23:58:29 +0000 (16:58 -0700)]
Merge branch 'smsc911x-acpi'
Jeremy Linton says:
====================
Enable smsc911x for use with ACPI
This set of patches enables the front Ethernet port on the
ARM Juno development platform when used with an ACPI enabled kernel.
These patches covert the of_property* calls in the driver to the
DT/ACPI agnostic device_property* calls, and add the arm hardware
id to the acpi_match_table.
To support the above changes I copied a couple routines from
of_net into the properties.c file, and modified them to
be ACPI/DT agnostic. I'm not 100% sure this is the correct location
for these functions. But I think they are required to avoid having
a dozen different implementations scattered across assorted Ethernet
adapters that are being enabled to use ACPI properties.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Linton [Wed, 12 Aug 2015 22:06:27 +0000 (17:06 -0500)]
Convert smsc911x to use ACPI as well as DT
Add ACPI bindings for the smsc911x driver. Convert the DT specific calls
to nonspecific device* calls, This allows the driver to work
with both ACPI and DT configurations. Ethernet should now work when using
ACPI on ARM Juno.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Linton [Wed, 12 Aug 2015 22:06:26 +0000 (17:06 -0500)]
Add a matching set of device_ functions for determining mac/phy
OF has some helper functions for parsing MAC and PHY settings.
In cases where the platform is providing this information rather
than the device itself, there needs to be similar functions for ACPI.
These functions are slightly modified versions of the ones in
of_net which can use information provided via DT or ACPI.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 13 Aug 2015 23:52:20 +0000 (16:52 -0700)]
Merge branch 'tcp-loss-probe'
Yuchung Cheng says:
====================
minor tail loss probe improvements
This patch series enhance the tail loss probe (TLP) on some error
conditions. When TLP fails to send a probe, it will no longer
extend the RTO. When it fails to send a new packet because of
receiver window limit, it'll try to retransmit the last packet.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Wed, 12 Aug 2015 18:18:18 +0000 (11:18 -0700)]
tcp: don't extend RTO on failed loss probe attempts
If TLP was unable to send a probe, it extended the RTO to
now + icsk_rto. But extending the RTO makes little sense
if no TLP probe went out. With this commit, instead of
extending the RTO we re-arm it relative to the transmit time
of the write queue head.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 870915feabdc ("drivers: net: cpsw: remove
disable_irq/enable_irq as irq can be masked from cpsw itself"),
CPSW on AM335x beagle bone white is broken as there is a errata
for AM335x PG1.0. This patch series implements the workaround by
disabling the interrupts from ARM IRQ controller for AM335x SoC
in addition to the masking of interrupts in CPSW.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Wed, 12 Aug 2015 09:52:53 +0000 (15:22 +0530)]
drivers: net: cpsw: add am335x errata workarround for interrutps
As per Am335x Errata [1] Advisory 1.0.9, The CPSW C0_TX_PEND and
C0_RX_PEND interrupt outputs provide a single transmit interrupt
that combines transmit channel interrupts TXPEND[7:0] and a
single receive interrupt that combines receive channel interrupts
RXPEND[7:0]. The TXPEND[0] and RXPEND[0] interrupt outputs are
connected to the ARM Cortex-A8 interrupt controller (INTC) rather
than the C0_TX_PEND and C0_RX_PEND interrupt outputs. So even
though CPSW interrupt is cleared by writing appropriate values to
EOI register the interrupt is not cleared in IRQ controller. So
interrupt is still pending and CPU is struck in ISR, the
workaround is to disable the interrupts in ARM irq controller.
Linus Torvalds [Thu, 13 Aug 2015 20:52:46 +0000 (13:52 -0700)]
Merge tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- two stable fixes for corruption seen in a snapshot of thinp metadata;
metadata snapshots aren't widely used but help provide a consistent
view of the metadata associated with an active thin-pool.
- a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq"
* tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache policy smq: move 'dm-cache-default' module alias to SMQ
dm btree: add ref counting ops for the leaves of top level btrees
dm thin metadata: delete btrees when releasing metadata snapshot
Linus Torvalds [Thu, 13 Aug 2015 20:44:32 +0000 (13:44 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull xen block driver fixes from Jens Axboe:
"A few small bug fixes for xen-blk{front,back} that have been sitting
over my vacation"
* 'for-linus' of git://git.kernel.dk/linux-block:
xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
xen-blkfront: don't add indirect pages to list when !feature_persistent
xen-blkfront: introduce blkfront_gather_backend_features()
Linus Torvalds [Thu, 13 Aug 2015 20:36:22 +0000 (13:36 -0700)]
Merge tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
- fix a memory leak affecting backends in HVM guests.
- fix PV domU hang with certain configurations.
* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
Revert "xen/events/fifo: Handle linked events when closing a port"
x86/xen: build "Xen PV" APIC driver for domU as well
Linus Torvalds [Thu, 13 Aug 2015 15:25:20 +0000 (08:25 -0700)]
Revert x86 sigcontext cleanups
This reverts commits 9a036b93a344 ("x86/signal/64: Remove 'fs' and 'gs'
from sigcontext") and c6f2062935c8 ("x86/signal/64: Fix SS handling for
signals delivered to 64-bit programs").
They were cleanups, but they break dosemu by changing the signal return
behavior (and removing 'fs' and 'gs' from the sigcontext struct - while
not actually changing any behavior - causes build problems).
Linus Torvalds [Thu, 13 Aug 2015 17:22:11 +0000 (10:22 -0700)]
Merge tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC fix from Borislav Petkov:
"A ppc4xx_edac fix for accessing ->csrows properly. This driver was
missed during the conversion a couple of years ago"
* tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, ppc4xx: Access mci->csrows array elements properly
Rick Jones [Wed, 12 Aug 2015 17:23:14 +0000 (10:23 -0700)]
documentation: bring vxlan documentation more up-to-date
A few things have changed since the previous version of the vxlan
documentation was written, so update it and correct some grammar and
such while we are at it.
Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Aug 2015 23:42:12 +0000 (16:42 -0700)]
Merge branch 'cxgb4-more-debug-info'
Hariprasad Shenai says:
====================
Add some more debug info
This patch series adds the following.
Add more info for sge_qinfo dump
Differentiate tid and stids between different regions, and add a debugfs
entry to dump all the tid info
This patch series has been created against net-next tree and includes
patches on cxgb4 driver.
We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: Differentiate between stids between server and filter region
For T4 adapter, offloaded servers tid for IPv4 connections are
allocated from filter region. So add a new field for server filter tid if
server tid is allocated from filter region.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mugunthan V N [Wed, 12 Aug 2015 10:01:43 +0000 (15:31 +0530)]
net: ipv4: increase dhcp inter device timeout
When a system has multiple ethernet devices and during DHCP
request (for using NFS), the system waits only for HZ/2 which is
500mS before switching to another interface for DHCP.
There are some routers (Ex: Trendnet routers) which responds to
DHCP request at about 560mS. When the system has only one
ethernet interface there is no issue as the timeout is 2S and the
dev xid doesn't changes and only retries.
But when the system has multiple Ethernet like DRA74x with CPSW
in dual EMAC mode, the DHCP response is dropped as the dev xid
changes while shifting to the next device. So changing inter
device timeout to HZ (which is 1S).
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kaixu Xia [Wed, 12 Aug 2015 09:37:53 +0000 (09:37 +0000)]
bpf: fix build warnings and add function read_trace_pipe()
There are two improvements in this patch:
1. Fix the build warnings;
2. Add function read_trace_pipe() to print the result on
the screen;
Before this patch, we can get the result through /sys/kernel/de
bug/tracing/trace_pipe and get nothing on the screen.
By applying this patch, the result can be printed on the screen.
$ ./tracex6
...
tracex6-705 [003] d..1 131.428593: : CPU-3 19981414
sshd-683 [000] d..1 131.428727: : CPU-0 221682321
sshd-683 [000] d..1 131.428821: : CPU-0 221808766
sshd-683 [000] d..1 131.428950: : CPU-0 221982984
sshd-683 [000] d..1 131.429045: : CPU-0 222111851
tracex6-705 [003] d..1 131.429168: : CPU-3 20757551
sshd-683 [000] d..1 131.429170: : CPU-0 222281240
sshd-683 [000] d..1 131.429261: : CPU-0 222403340
sshd-683 [000] d..1 131.429378: : CPU-0 222561024
...
Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ron Angeles [Wed, 12 Aug 2015 06:01:20 +0000 (23:01 -0700)]
net: atl1c: add BQL support
This BQL implementation is mostly derived from its related driver, alx.
Tested on AR8131 (rev c0) [1969:1063]. Saturated a 100mbps link with 5
concurrent runs of netperf. Ping latency dropped from 14ms to 3ms.
Signed-off-by: Ron Angeles <ronangeles@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(3) We observed that the masking rules it generates do not
play well with clustering on P2020. Only first rule
of the cluster would ever fire. Given that optimizer
relies heavily on masking this is very hard to fix.
Which looks correct according to the spec but only the first
(eth id 252)/last added rule for 10.0.0.3 will ever trigger.
As if filer did not treat the AND CLE as cluster start but
also kept AND-ing the rules. We found no errata covering this.
The fact that nobody noticed (2) or (3) makes me think
that this feature is not very widely used and we should just
remove it.
Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 12 Aug 2015 00:41:55 +0000 (02:41 +0200)]
gianfar: correct filer table writing
MAX_FILER_IDX is the last usable index. Using less-than
will already guarantee that one entry for catch-all rule
will be left, no need to subtract 1 here.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
This enables the use of ethtool --set-channels devname combined N to
change the number of vRSS queues. Separate rx, tx, and other parameters
are not supported. The maximum is rsscap.num_recv_que. It passes the
given value to rndis_filter_device_add through the device_info->num_chn
field.
If the procedure fails, it attempts to recover to the prior state. If
the recovery fails, it logs an error and aborts.
Current num_chn is saved and restored when changing the MTU.
Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Uses device_info->num_chn to pass user provided number of vRSS
queues (from ethtool --set-channels) to rndis_filter_device_add. If
nonzero and less than the maximum, set net_device->num_chn to the given
value; else default to prior algorithm.
Always initialize struct device_info to 0, otherwise not all its fields
are guaranteed to be 0, which is necessary when checking if num_chn has
been purposefully set.
Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
lan78xx.c:2282 tx_complete() warn: variable dereferenced before check 'skb' (see line 2249)
lan78xx.c:2885 lan78xx_bh() info: ignoring unreachable code.
lan78xx.c:3159 lan78xx_probe() info: ignoring unreachable code.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: Gratuitous ARP gets dropped when first slave added
When the first slave is added (such as during bootup) the first
gratuitous ARP gets dropped. We don't see this drop during a failover.
The packet gets dropped in qdisc (noop_enqueue).
The fix is to delay the sending of gratuitous ARPs till the bond dev's
carrier is present.
It can also be worked around by setting num_grat_arp to more than 1.
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Mon, 10 Aug 2015 10:26:32 +0000 (12:26 +0200)]
net: eth: altera: Remove sgdmadesclen member from altera_tse_private
altera_tse_private->sgdmadesclen is always assigned assigned the same
value and never changes during runtime. Remove the struct member and
use a new define for sizeof(struct sgdma_descrip) instead.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: Do not override PHY interface if already configured
In case we need to divert reads/writes using the slave MII bus, we may have
already fetched a valid PHY interface property from Device Tree, and that
mode is used by the PHY driver to make configuration decisions.
If we could not fetch the "phy-mode" property, we will assign p->phy_interface
to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as
to whether or not we should override the interface value.
Fixes: 19334920eaf7 ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 12 Aug 2015 18:13:54 +0000 (11:13 -0700)]
Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux
Pull amd drm fixes from Alex Deucher:
"Dave is on vacation at the moment, so please pull these radeon and
amdgpu fixes directly.
Just a few minor things for 4.2:
- add a new radeon pci id
- fix a power management regression in amdgpu
- fix HEVC command buffer validation in amdgpu"
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add new OLAND pci id
Revert "drm/amdgpu: Configure doorbell to maximum slots"
drm/amdgpu: add context buffer size check for HEVC
Linus Torvalds [Wed, 12 Aug 2015 16:06:39 +0000 (09:06 -0700)]
Merge tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"regmap: Fix handling of present bits on rbtree cache block resize
When expanding a cache block we use krealloc() to resize the register
present bitmap without initialising the newly allocated data (the
original code was written for kzalloc()). Add an appropraite memset()
to fix that"
* tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: regcache-rbtree: Clean new present bits on present bitmap resize
Yi Zhang [Wed, 12 Aug 2015 11:22:43 +0000 (19:22 +0800)]
dm cache policy smq: move 'dm-cache-default' module alias to SMQ
When creating dm-cache with the default policy, it will call
request_module("dm-cache-default") to register the default policy.
But the "dm-cache-default" alias was left referring to the MQ policy.
Fix this by moving the module alias to SMQ.
Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Joe Thornber [Wed, 12 Aug 2015 14:12:09 +0000 (15:12 +0100)]
dm btree: add ref counting ops for the leaves of top level btrees
When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down. If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented
accordingly.
This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp). And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 11 Aug 2015 22:13:41 +0000 (15:13 -0700)]
Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig fix from Steven Rostedt:
"Leonidas Spyropoulos found that modules like nouveau were being
unselected by make localmodconfig even though their configs were set
and the module was loaded and visible by lsmod.
The reason for this was because streamline-config.pl only looks at
Makefiles, and not Kbuild files. As these modules use Kbuild for
their names, they too need to be checked by localmodconfig. This was
fixed by Richard Weinberger"
* tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Use Kbuild files too
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
David S. Miller [Tue, 11 Aug 2015 21:16:07 +0000 (14:16 -0700)]
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2015-08-11
Here's an important regression fix for the 4.2-rc series that ensures
user space isn't given invalid LTK values. The bug essentially prevents
the encryption of subsequent LE connections, i.e. makes it impossible to
pair devices over LE.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
LEROY Christophe [Tue, 11 Aug 2015 10:11:03 +0000 (12:11 +0200)]
net: fs_enet: mask interrupts for TX partial frames.
We are not interested in interrupts for partially transmitted frames.
Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer
descriptors, instead it defines two interrupt bits, TXB and TXF.
We have to mask TXB in order to only get interrupts once the
frame is fully transmitted.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
LEROY Christophe [Tue, 11 Aug 2015 10:11:00 +0000 (12:11 +0200)]
net: fs_enet: explicitly remove I flag on TX partial frames
We are not interested in interrupts for partially transmitted frames,
we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain
from a previously used descriptor.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 11 Aug 2015 19:03:20 +0000 (12:03 -0700)]
Merge branch 'mv88e6xxx-switchdev-fdb'
Vivien Didelot says:
====================
net: dsa: mv88e6xxx: support switchdev FDB objects
This patchset refactors the FDB management in the mv88e6xxx code and adds the
glue in DSA to use the switchdev FDB objects.
Below is an usage example (ports 0-2 belongs to br0, ports 3-4 belongs to br1):
# bridge fdb add 3c:97:0e:11:30:6e dev swp2
# bridge fdb add 3c:97:0e:11:40:78 dev swp3
# bridge fdb add 3c:97:0e:11:50:86 dev swp4
# bridge fdb del 3c:97:0e:11:40:78 dev swp3
# bridge fdb
01:00:5e:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth1 self permanent
00:50:d2:10:78:15 dev swp0 master br0 permanent
3c:97:0e:11:30:6e dev swp2 self static
00:50:d2:10:78:15 dev swp3 master br1 permanent
3c:97:0e:11:50:86 dev swp4 self static
# cat /sys/kernel/debug/dsa0/atu
# DB T/P Vec State Addr
# 001 Port 004 e 3c:97:0e:11:30:6e
# 004 Port 010 e 3c:97:0e:11:50:86
For the 88E6xxx switches, FIDs 1 to num_ports will be reserved for non-bridged
ports and bridge groups, and the remaining will be later used by VLANs.
This change is necessary to welcome the support for hardware VLANs (which will
follow soon).
Changes in v3:
- reorder commits to improve bisectability and minimize diffs
- add an ndm_state member in switchdev_fdb_obj instead of an is_static boolean
- drop the need to convert unsigned char *addr to u8 addr[ETH_ALEN]
(it is casted to char pointer anyway)
Changes in v2:
- remove ndo_bridge_{get,set,del}link from switchdev/DSA glue code
- use ether_addr_copy instead of memcpy for MAC addresses
- constify MAC address in port_fdb_{add,del}
- split the mv88e6xxx code refactoring into several patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 10 Aug 2015 13:09:52 +0000 (09:09 -0400)]
net: switchdev: support static FDB addresses
This patch adds an ndm_state member to the switchdev_obj_fdb structure,
in order to support static FDB addresses.
Set Rocker ndm_state to NUD_REACHABLE.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add a mv88e6xxx_atu_entry structure and a low level function for the ATU
Load operation, and provide FDB add and delete wrappers functions.
This implementation handles the eventual trunk mapping. If the related
bit is set, then the ATU data register would contain the trunk ID, and
not the port vector.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 10 Aug 2015 13:09:48 +0000 (09:09 -0400)]
net: dsa: mv88e6xxx: rename ATU MAC accessors
Rename the __mv88e6xxx_{read,write}_addr functions to more explicit
_mv88e6xxx_atu_mac_{read,write} functions, which also respect the single
underscore convention used in the file (meaning SMI lock must be held).
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Mon, 10 Aug 2015 13:09:47 +0000 (09:09 -0400)]
net: dsa: mv88e6xxx: extend fid mask
The driver currently manages one FID per port (or bridge group), with a
mask of DSA_MAX_PORTS bits, where 0 means that the FID is in use.
The Marvell 88E6xxx switches support up to 4094 FIDs (from 1 to 0xfff;
FID 0 means that multiple address databases are not being used).
This patch changes the fid_mask for an fid_bitmap of 4096 bits.
>From now on, FIDs 1 to num_ports are reserved for non-bridged ports and
bridge groups (a bridge group gets the FID of its first member). The
remaining bits will be reserved for VLAN entries.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kaixu Xia [Tue, 11 Aug 2015 08:56:51 +0000 (08:56 +0000)]
bpf: s390: Fix build error caused by the struct bpf_array member name changed
There is a build error that "'struct bpf_array' has no member
named 'prog'" on s390. In commit 2a36f0b92eb6 ("bpf: Make the
bpf_prog_array_map more generic"), the member 'prog' of struct
bpf_array is replaced by 'ptrs'. So this patch fixes it.
Fixes: 2a36f0b92eb6 ("bpf: Make the bpf_prog_array_map more generic") Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Change from v1: Drop PHY binding part, use fwnode_property* APIs.
The first patch (1/2) rearranges the existing code a little with no
functional change to get ready for the second. The second (2/2) does
the actual work of adding support to extract the needed information
from the ACPI tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on code from: Narinder Dhillon <ndhillon@cavium.com>
Tomasz Nowicki <tomasz.nowicki@linaro.org>
Robert Richter <rrichter@cavium.com>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Richter [Tue, 11 Aug 2015 00:58:36 +0000 (17:58 -0700)]
net: thunder: Factor out DT specific code in BGX
Separate DT code in preparation for follow-on ACPI integration.
Based on code from: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 11 Aug 2015 17:23:59 +0000 (10:23 -0700)]
Merge tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix display regression on Versatile boards
- fix OF node refcount bugs on omapdss
- fix WARN about clock prepare on pxa3xx_gcu
- fix mem leak in videomode helpers
- fix fbconsole related boot problem on sun7i-a20-olinuxino-micro
* tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
fbcon: unconditionally initialize cursor blink interval
video: Fix possible leak in of_get_videomode()
video: fbdev: pxa3xx_gcu: prepare the clocks
OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrement
OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port()
fbdev: select versatile helpers for the integrator
Julien Grall [Mon, 10 Aug 2015 18:10:38 +0000 (19:10 +0100)]
xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
The commit ccc9d90a9a8b5c4ad7e9708ec41f75ff9e98d61d "xenbus_client:
Extend interface to support multi-page ring" removes the call to
free_xenballooned_pages() in xenbus_unmap_ring_vfree_hvm(), leaking a
page for every shared ring.
Only with backends running in HVM domains were affected.
Signed-off-by: Julien Grall <julien.grall@citrix.com> Cc: <stable@vger.kernel.org> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Eric Dumazet [Mon, 10 Aug 2015 22:07:34 +0000 (15:07 -0700)]
inet: fix possible request socket leak
In commit b357a364c57c9 ("inet: fix possible panic in
reqsk_queue_unlink()"), I missed fact that tcp_check_req()
can return the listener socket in one case, and that we must
release the request socket refcount or we leak it.
Tested:
Following packetdrill test template shows the issue
+0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.002 < . 1:1(0) ack 21 win 2920
+0 > R 21:21(0)
Fixes: b357a364c57c9 ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 10 Aug 2015 16:09:13 +0000 (09:09 -0700)]
inet: fix races with reqsk timers
reqsk_queue_destroy() and reqsk_queue_unlink() should use
del_timer_sync() instead of del_timer() before calling reqsk_put(),
otherwise we could free a req still used by another cpu.
But before doing so, reqsk_queue_destroy() must release syn_wait_lock
spinlock or risk a dead lock, as reqsk_timer_handler() might
need to take this same spinlock from reqsk_queue_unlink() (called from
inet_csk_reqsk_queue_drop())
Fixes: fa76ce7328b2 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Atzm Watanabe [Mon, 10 Aug 2015 14:39:09 +0000 (23:39 +0900)]
vxlan: fix fdb_dump index calculation
When too many remotes are bound to an FDB entry, index may not be increased.
This problem will be caused on the large scale environment that is based on
the unicast default destination, for instance.
Signed-off-by: Atzm Watanabe <atzm@iij.ad.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Mon, 10 Aug 2015 12:54:28 +0000 (09:54 -0300)]
mellanox: mlxsw: Use '%zx' to print size_t format
Use '%zx' to print size_t format in order to fix the following build warning:
drivers/net/ethernet/mellanox/mlxsw/item.h:65:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Wformat=]
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio Estevam [Mon, 10 Aug 2015 17:22:43 +0000 (14:22 -0300)]
mkiss: Fix error handling in mkiss_open()
If register_netdev() fails we are not propagating the error and
we return success because ax_open() succeeded previously.
Fix this by checking the return value of ax_open() and
register_netdev() and propagate the error in case of failure.
Reported-by: RUC_Soft_Sec <zy900702@163.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains five Netfilter fixes for your net tree,
they are:
1) Silence a warning on falling back to vmalloc(). Since 88eab472ec21, we can
easily hit this warning message, that gets users confused. So let's get rid
of it.
2) Recently when porting the template object allocation on top of kmalloc to
fix the netns dependencies between x_tables and conntrack, the error
checks where left unchanged. Remove IS_ERR() and check for NULL instead.
Patch from Dan Carpenter.
3) Don't ignore gfp_flags in the new nf_ct_tmpl_alloc() function, from
Joe Stringer.
4) Fix a crash due to NULL pointer dereference in ip6t_SYNPROXY, patch from
Phil Sutter.
5) The sequence number of the Syn+ack that is sent from SYNPROXY to clients is
not adjusted through our NAT infrastructure, as a result the client may
ignore this TCP packet and TCP flow hangs until the client probes us. Also
from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 10 Aug 2015 22:16:48 +0000 (15:16 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- fix for bounds limit calculation in uclogic driver, by Dan Carpenter
- fix for use-after-free during device removal, by Krzysztof Kozlowski
- fix for userspace regression (that became apparent only with shiny
new libinput, so it's not that bad, but I still consider it 4.2
material), in wacom driver, by Jason Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Report correct device resolution when using the wireless adapater
HID: hid-input: Fix accessing freed memory during device disconnect
HID: uclogic: fix limit in uclogic_tablet_enable()
Jason Gerecke [Wed, 5 Aug 2015 22:44:53 +0000 (15:44 -0700)]
HID: wacom: Report correct device resolution when using the wireless adapater
The 'wacom_wireless_work' function does not recalculate the tablet's
resolution, causing the value contained in the 'features' struct to
always be reported to userspace. This value is valid only for the pen
interface, meaning that the value will be incorrect for the touchpad (if
present). This in particular causes problems for libinput which relies
on the reported resolution being correct.
This patch adds the necessary calls to recalculate the resolution for
each interface. This requires a little bit of code shuffling since both
the 'wacom_set_default_phy' and 'wacom_calculate_res' are declared below
their new first point of use in 'wacom_wireless_work'.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
projects / mirror_ubuntu-eoan-kernel.git / log