efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
drm/xen-front: Pass dumb buffer data offset to the backend
While importing a dmabuf it is possible that the data of the buffer
is put with offset which is indicated by the SGT offset.
Respect the offset value and forward it to the backend.
xen: Sync up with the canonical protocol definition in Xen
This is the sync up with the canonical definition of the
display protocol in Xen.
1. Add protocol version as an integer
Version string, which is in fact an integer, is hard to handle in the
code that supports different protocol versions. To simplify that
also add the version as an integer.
2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE
There are cases when display data buffer is created with non-zero
offset to the data start. Handle such cases and provide that offset
while creating a display buffer.
3. Add XENDISPL_OP_GET_EDID command
Add an optional request for reading Extended Display Identification
Data (EDID) structure which allows better configuration of the
display connectors over the configuration set in XenStore.
With this change connectors may have multiple resolutions defined
with respect to detailed timing definitions and additional properties
normally provided by displays.
If this request is not supported by the backend then visible area
is defined by the relevant XenStore's "resolution" property.
If backend provides extended display identification data (EDID) with
XENDISPL_OP_GET_EDID request then EDID values must take precedence
over the resolutions defined in XenStore.
xen/gntdev: Fix dmabuf import with non-zero sgt offset
It is possible that the scatter-gather table during dmabuf import has
non-zero offset of the data, but user-space doesn't expect that.
Fix this by failing the import, so user-space doesn't access wrong data.
With support for 32-bit pv guests gone pure pv-code no longer needs to
test for highmem. Dropping those tests removes the need for flushing
in some places.
Juergen Gross [Mon, 29 Jun 2020 08:35:39 +0000 (10:35 +0200)]
x86/xen: remove 32-bit Xen PV guest support
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.
xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint
dma_cache_maint is getting called passing a dma address which could be
different from a physical address.
Add a struct device* parameter to dma_cache_maint.
Translate the dma_addr_t parameter of dma_cache_maint by calling
dma_to_phys. Do it for the first page and all the following pages, in
case of multipage handling.
xen/arm: introduce phys/dma translations in xen_dma_sync_for_*
xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are
getting called passing dma addresses. On some platforms dma addresses
could be different from physical addresses. Before doing any operations
on these addresses we need to convert them back to physical addresses
using dma_to_phys.
Move the arch_sync_dma_for_cpu and arch_sync_dma_for_device calls from
xen_dma_sync_for_cpu/device to swiotlb-xen.c, and add a call dma_to_phys
to do address translations there.
With some devices physical addresses are different than dma addresses.
To be able to deal with these cases, we need to call phys_to_dma on
physical addresses (including machine addresses in Xen terminology)
before returning them from xen_swiotlb_alloc_coherent and
xen_swiotlb_map_page.
We also need to convert dma addresses back to physical addresses using
dma_to_phys in xen_swiotlb_free_coherent and xen_swiotlb_unmap_page if
we want to do any operations on them.
Call dma_to_phys in is_xen_swiotlb_buffer.
Introduce xen_phys_to_dma and call phys_to_dma in its implementation.
Introduce xen_dma_to_phys and call dma_to_phys in its implementation.
Call xen_phys_to_dma/xen_dma_to_phys instead of
xen_phys_to_bus/xen_bus_to_phys through swiotlb-xen.c.
Everything is taken care of by these changes except for
xen_swiotlb_alloc_coherent and xen_swiotlb_free_coherent, which need a
few explicit phys_to_dma/dma_to_phys calls.
It is not strictly needed. Call virt_to_phys on xen_io_tlb_start
instead. It will be useful not to have a start_dma_addr around with the
next patches.
Note that virt_to_phys is not the same as xen_virt_to_bus but actually
it is used to compared again __pa(xen_io_tlb_start) as passed to
swiotlb_init_with_tbl, so virt_to_phys is actually what we want.
Boris Ostrovsky [Fri, 10 Jul 2020 22:34:17 +0000 (15:34 -0700)]
swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses
xen_alloc_coherent_pages might return pages for which virt_to_phys and
virt_to_page don't work, e.g. ioremap'ed pages.
So in xen_swiotlb_free_coherent we can't assume that virt_to_page works.
Instead add a is_vmalloc_addr check and use vmalloc_to_page on vmalloc
virt addresses.
This patch fixes the following crash at boot on RPi4 (the underlying
issue is not RPi4 specific):
https://marc.info/?l=xen-devel&m=158862573216800
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Corey Minyard <cminyard@mvista.com> Tested-by: Roman Shaposhnik <roman@zededa.com> Link: https://lore.kernel.org/r/20200710223427.6897-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
This has been fixed by commit dca4436d1cf9e0d237c which added the out
of bounds check to __add_memory, so that trying to add blocks past
MAX_PHYSMEM_BITS will fail.
Note the check in the Xen balloon driver was bogus anyway, as it
checked the start address of the resource, but it should instead test
the end address to assert the whole resource falls below
MAX_PHYSMEM_BITS.
xen/balloon: fix accounting in alloc_xenballooned_pages error path
target_unpopulated is incremented with nr_pages at the start of the
function, but the call to free_xenballooned_pages will only subtract
pgno number of pages, and thus the rest need to be subtracted before
returning or else accounting will be skewed.
xen/privcmd: Convert get_user_pages*() to pin_user_pages*()
In 2019, we introduced pin_user_pages*() and now we are converting
get_user_pages*() to the new API as appropriate. [1] & [2] could
be referred for more information. This is case 5 as per document [1].
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-4-git-send-email-jrdr.linux@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
Previously, if lock_pages() end up partially mapping pages, it used
to return -ERRNO due to which unlock_pages() have to go through
each pages[i] till *nr_pages* to validate them. This can be avoided
by passing correct number of partially mapped pages & -ERRNO separately,
while returning from lock_pages() due to error.
With this fix unlock_pages() doesn't need to validate pages[i] till
*nr_pages* for error scenario and few condition checks can be ignored.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Paul Durrant <xadimgnik@gmail.com> Link: https://lore.kernel.org/r/1594525195-28345-2-git-send-email-jrdr.linux@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
Linus Torvalds [Sun, 2 Aug 2020 18:23:51 +0000 (11:23 -0700)]
Merge tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- clean the generated moc file for xconfig
- fix xconfig bugs, and revert some bad commits
* tag 'kbuild-fixes-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: remove redundant FORCE definition in scripts/Makefile.modpost
kconfig: qconf: remove wrong ConfigList::firstChild()
Revert "kconfig: qconf: don't show goback button on splitMode"
Revert "kconfig: qconf: Change title for the item window"
kconfig: qconf: remove "goBack" debug message
kconfig: qconf: use delete[] instead of delete to free array
kconfig: qconf: compile moc object separately
kconfig: qconf: use if_changed for qconf.moc rule
modpost: explain why we can't use strsep
Linus Torvalds [Sun, 2 Aug 2020 17:41:00 +0000 (10:41 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and strengthening the validity checks on inputs from new
userspace APIs.
Now I know why I shouldn't prepare pull requests on the weekend, it's
hard to concentrate if your son is shouting about his latest Minecraft
builds in your ear. Fortunately all the patches were ready and I just
had to check the test results..."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Fix disable pause loop exit/pause filtering capability on SVM
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: arm64: Prevent vcpu_has_ptrauth from generating OOL functions
KVM: nVMX: check for invalid hdr.vmx.flags
KVM: nVMX: check for required but missing VMCS12 in KVM_SET_NESTED_STATE
selftests: kvm: do not set guest mode flag
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
Linus Torvalds [Sat, 1 Aug 2020 20:08:50 +0000 (13:08 -0700)]
Merge tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Fix libtraceevent build with binutils 2.35
- Fix memory leak in process_dynamic_array_len in libtraceevent
- Fix 'perf test 68' zstd compression for s390
- Fix record failure when mixed with ARM SPE event
* tag 'perf-tools-fixes-2020-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
libtraceevent: Fix build with binutils 2.35
perf tools: Fix record failure when mixed with ARM SPE event
perf tests: Fix test 68 zstd compression for s390
tools lib traceevent: Fix memory leak in process_dynamic_array_len
Taehee Yoo [Sat, 1 Aug 2020 07:07:50 +0000 (07:07 +0000)]
vxlan: fix memleak of fdb
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.
Test commands:
ip link add vxlan0 type vxlan dstport 4789 external
ip link set vxlan0 up
bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
src_vni 10000 self permanent
ip link del vxlan0
Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 1 Aug 2020 17:11:42 +0000 (10:11 -0700)]
Merge tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single last minute pin control fix to the Qualcomm driver fixing
missing dual edge PCH interrupts"
* tag 'pinctrl-v5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Handle broken/missing PDC dual edge IRQs on sc7180
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).
The main changes are:
1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.
2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
btf_vmlinux is available, from Peilin Ye.
3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.
4) Fix a cgroup sockopt verifier test by specifying expected attach type,
from Jean-Philippe Brucker.
Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb7feb ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a0511c7 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.
Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:
int btf_resolve_helper_id(struct bpf_verifier_log *log,
const struct bpf_func_proto *fn, int arg)
{
int id;
if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
return -EINVAL;
id = fn->btf_id[arg];
if (!id || id > btf_vmlinux->nr_types)
return -EINVAL;
return id;
}
Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix policy matching with mark and mask on userspace interfaces.
From Xin Long.
2) Several fixes for the new ESP in TCP encapsulation.
From Sabrina Dubroca.
3) Fix crash when the hold queue is used. The assumption that
xdst->path and dst->child are not a NULL pointer only if dst->xfrm
is not a NULL pointer is true with the exception of using the
hold queue. Fix this by checking for hold queue usage before
dereferencing xdst->path or dst->child.
4) Validate pfkey_dump parameter before sending them.
From Mark Salyzyn.
5) Fix the location of the transport header with ESP in UDPv6
encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Peilin Ye [Thu, 30 Jul 2020 19:20:26 +0000 (15:20 -0400)]
rds: Prevent kernel-infoleak in rds_notify_queue_get()
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org Fixes: f037590fff30 ("rds: fix a leak of kernel memory") Fixes: bdbe6fbc6a2f ("RDS: recv.c") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched: The error lable position is corrected in ct_init_module
Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone") Signed-off-by: liujian <liujian56@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some I2C core improvements to prevent NULL pointer usage and a
MAINTAINERS update"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: slave: add sanity check when unregistering
i2c: slave: improve sanity check when registering
MAINTAINERS: Update GENI I2C maintainers list
i2c: also convert placeholder function to return errno
Merge tag 'powerpc-5.8-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix a bug introduced by the changes we made to lockless page table
walking this cycle.
When using the hash MMU, and perf with callchain recording, we can
deadlock if the PMI interrupts a hash fault, and the callchain
recording then takes a hash fault on the same page.
Thanks to Nicholas Piggin, Aneesh Kumar K.V, Anton Blanchard, and
Athira Rajeev"
* tag 'powerpc-5.8-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/hash: Fix hash_preload running with interrupts enabled
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main one is to fix the build after Willy's per-cpu entropy changes
this week. Although that was already resolved elsewhere, the arm64 fix
here is useful cleanup anyway.
Other than that, we've got a fix for building with Clang's integrated
assembler and a fix to make our IPv4 checksumming robust against
invalid header lengths (this only seems to be triggerable by injected
errors).
- Fix build breakage due to circular headers
- Fix build regression when using Clang's integrated assembler
- Fix IPv4 header checksum code to deal with invalid length field
- Fix broken path for Arm PMU entry in MAINTAINERS"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
MAINTAINERS: Include drivers subdirs for ARM PMU PROFILING AND DEBUGGING entry
arm64: csum: Fix handling of bad packets
arm64: Drop unnecessary include from asm/smp.h
arm64/alternatives: move length validation inside the subsection
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- avoid invoking overflow handler for uaccess watchpoints
- fix incorrect clock_gettime64 availability
- fix EFI crash in create_mapping_late()
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8988/1: mmu: fix crash in EFI calls due to p4d typo in create_mapping_late()
ARM: 8987/1: VDSO: Fix incorrect clock_gettime64
ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two more merge window regressions, a corruption bug in hfi1 and a few
other small fixes.
- Missing user input validation regression in ucma
- Disallowing a previously allowed user combination regression in
mlx5
- ODP prefetch memory leaking triggerable by userspace
- Memory corruption in hf1 due to faulty ring buffer logic
- Missed mutex initialization crash in mlx5
- Two small defects with RDMA DIM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Free DIM memory in error unwind
RDMA/core: Stop DIM before destroying CQ
RDMA/mlx5: Initialize QP mutex for the debug kernels
IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE
RDMA/mlx5: Allow providing extra scatter CQE QP flag
RDMA/mlx5: Fix prefetch memory leak if get_prefetchable_mr fails
RDMA/cm: Add min length checks to user structure copies
Merge tag 'sound-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few wrap-up small fixes for the usual HD-audio and USB-audio stuff:
- A regression fix for S3 suspend on old Intel platforms
- A fix for possible Oops in ASoC HD-audio binding
- Trivial quirks for various devices"
* tag 'sound-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fixed HP right speaker no sound
ALSA: hda: fix NULL pointer dereference during suspend
ALSA: hda/hdmi: Fix keep_power assignment for non-component devices
ALSA: hda: Workaround for spurious wakeups on some Intel platforms
ALSA: hda/realtek: Fix add a "ultra_low_power" function for intel reference board (alc256)
ALSA: hda/realtek: typo_fix: enable headset mic of ASUS ROG Zephyrus G14(GA401) series with ALC289
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G15(GA502) series with ALC289
ALSA: usb-audio: Add implicit feedback quirk for SSL2
Ben Hutchings [Sat, 25 Jul 2020 01:06:23 +0000 (02:06 +0100)]
libtraceevent: Fix build with binutils 2.35
In binutils 2.35, 'nm -D' changed to show symbol versions along with
symbol names, with the usual @@ separator. When generating
libtraceevent-dynamic-list we need just the names, so strip off the
version suffix if present.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wei Li [Fri, 24 Jul 2020 07:11:10 +0000 (15:11 +0800)]
perf tools: Fix record failure when mixed with ARM SPE event
When recording with cache-misses and arm_spe_x event, I found that it
will just fail without showing any error info if i put cache-misses
after 'arm_spe_x' event.
[root@localhost 0620]# perf record -e cache-misses \
-e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.067 MB perf.data ]
[root@localhost 0620]#
[root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \
-e cache-misses sleep 1
[root@localhost 0620]#
The current code can only work if the only event to be traced is an
'arm_spe_x', or if it is the last event to be specified. Otherwise the
last event type will be checked against all the arm_spe_pmus[i]->types,
none will match and an out of bound 'i' index will be used in
arm_spe_recording_init().
We don't support concurrent multiple arm_spe_x events currently, that
is checked in arm_spe_recording_options(), and it will show the relevant
info. So add the check and record of the first found 'arm_spe_pmu' to
fix this issue here.
Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support") Signed-off-by: Wei Li <liwei391@huawei.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Wed, 29 Jul 2020 13:53:14 +0000 (15:53 +0200)]
perf tests: Fix test 68 zstd compression for s390
Commit 5aa98879efe7 ("s390/cpum_sf: prohibit callchain data collection")
prohibits call graph sampling for hardware events on s390. The
information recorded is out of context and does not match.
On s390 this commit now breaks test case 68 Zstd perf.data
compression/decompression.
Therefore omit call graph sampling on s390 in this test.
Output before:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
---- end ----
Zstd perf.data compression/decompression: FAILED!
[root@t35lp46 perf]#
Output after:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
500+0 records in
500+0 records out
256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M,
compressed (original 0.002 MB, ratio is 3.609) ]
Checking compressed events stats:
# compressed : Zstd, level = 1, ratio = 4
COMPRESSED events: 1
2ELIFREPh---- end ----
Zstd perf.data compression/decompression: Ok
[root@t35lp46 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools lib traceevent: Fix memory leak in process_dynamic_array_len
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
'Commit 8566ac8b8e7c ("KVM: SVM: Implement pause loop exit logic in SVM")'
drops disable pause loop exit/pause filtering capability completely, I
guess it is a merge fault by Radim since disable vmexits capabilities and
pause loop exit for SVM patchsets are merged at the same time. This patch
reintroduces the disable pause loop exit/pause filtering capability support.
Reported-by: Haiwei Li <lihaiwei@tencent.com> Tested-by: Haiwei Li <lihaiwei@tencent.com> Fixes: 8566ac8b ("KVM: SVM: Implement pause loop exit logic in SVM") Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-3-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wanpeng Li [Fri, 31 Jul 2020 03:12:19 +0000 (11:12 +0800)]
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC) Cc: <stable@vger.kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge tag 'drm-fixes-2020-07-31' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"As mentioned previously this contains the nouveau regression fix.
amdgpu had three fixes outstanding as well, one revert, an info leak
and use after free. The use after free is a bit trickier than I'd
like, and I've personally gone over it to confirm I'm happy that it is
doing what it says.
nouveau:
- final modifiers regression fix
amdgpu:
- Revert a fix which caused other regressions
- Fix potential kernel info leak
- Fix a use-after-free bug that was uncovered by another change in 5.7"
* tag 'drm-fixes-2020-07-31' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau: Accept 'legacy' format modifiers
Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"
drm/amd/display: Clear dm_state for fast updates
drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
Dave Airlie [Fri, 31 Jul 2020 03:04:00 +0000 (13:04 +1000)]
Merge tag 'amd-drm-fixes-5.8-2020-07-30' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-07-30:
amdgpu:
- Revert a fix which caused other regressions
- Fix potential kernel info leak
- Fix a use-after-free bug that was uncovered by another change in 5.7
James Jones [Thu, 30 Jul 2020 23:58:23 +0000 (16:58 -0700)]
drm/nouveau: Accept 'legacy' format modifiers
Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()
family of modifiers to handle broken userspace
Xorg modesetting and Mesa drivers. Existing Mesa
drivers are still aware of only these older
format modifiers which do not differentiate
between different variations of the block linear
layout. When the format modifier support flag was
flipped in the nouveau kernel driver, the X.org
modesetting driver began attempting to use its
format modifier-enabled framebuffer path. Because
the set of format modifiers advertised by the
kernel prior to this change do not intersect with
the set of format modifiers advertised by Mesa,
allocating GBM buffers using format modifiers
fails and the modesetting driver falls back to
non-modifier allocation. However, it still later
queries the modifier of the GBM buffer when
creating its DRM-KMS framebuffer object, receives
the old-format modifier from Mesa, and attempts
to create a framebuffer with it. Since the kernel
is still not aware of these formats, this fails.
Userspace should not be attempting to query format
modifiers of GBM buffers allocated with a non-
format-modifier-aware allocation path, but to
avoid breaking existing userspace behavior, this
change accepts the old-style format modifiers when
creating framebuffers and applying them to planes
by translating them to the equivalent new-style
modifier. To accomplish this, some layout
parameters must be assumed to match properties of
the device targeted by the relevant ioctls. To
avoid perpetuating misuse of the old-style
modifiers, this change does not advertise support
for them. Doing so would imply compatibility
between devices with incompatible memory layouts.
Reported-by: Kirill A. Shutemov <kirill@shutemov.name> Fixes: fa4f4c213f5f ("drm/nouveau/kms: Support NVIDIA format modifiers") Link: https://lkml.org/lkml/2020/6/30/1251 Signed-off-by: James Jones <jajones@nvidia.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.
The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".
Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.
Fixes: 422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jianbo Liu [Fri, 3 Jul 2020 02:34:23 +0000 (02:34 +0000)]
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
The flow_source must be specified, even for rule without matching
source vport, because some actions are only allowed in uplink.
Otherwise, rule can't be offloaded and firmware syndrome happens.
Fixes: 6fb0701a9cfa ("net/mlx5: E-Switch, Add support for offloading rules with no in_port") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jianbo Liu [Thu, 2 Jul 2020 01:06:37 +0000 (01:06 +0000)]
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
The modified flow_context fields in FTE must be indicated in
modify_enable bitmask. Previously, the misc bit in modify_enable is
always set as source vport must be set for each rule. So, when parsing
vxlan/gre/geneve/qinq rules, this bit is not set because those are all
from the same misc fileds that source vport fields are located at, and
we don't need to set the indicator twice.
After adding per vport tables for mirroring, misc bit is not set, then
firmware syndrome happens. To fix it, set the bit wherever misc fileds
are changed. This also makes it unnecessary to check misc fields and set
the misc bit accordingly in metadata matching, so here remove it.
Besides, flow_source must be specified for uplink because firmware
will check it and some actions are only allowed for packets received
from uplink.
Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
David S. Miller [Fri, 31 Jul 2020 00:47:34 +0000 (17:47 -0700)]
Merge tag 'mac80211-for-davem-2020-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of more changes:
* remove a warning that can trigger in certain races
* check a function pointer before using it
* check before adding 6 GHz to avoid a warning in mesh
* fix two memory leaks in mesh
* fix a TX status bug leading to a memory leak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Thu, 30 Jul 2020 07:30:00 +0000 (15:30 +0800)]
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Wed, 29 Jul 2020 17:52:17 +0000 (10:52 -0700)]
ionic: unlock queue mutex in error path
On an error return, jump to the unlock at the end to be sure
to unlock the queue_lock mutex.
Fixes: 0925e9db4dc8 ("ionic: use mutex to protect queue operations") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.
The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.
Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU") Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Lu Wei [Wed, 29 Jul 2020 03:50:05 +0000 (11:50 +0800)]
net: nixge: fix potential memory leak in nixge_probe()
If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.
Fixes: 87ab207981ec ("net: nixge: Separate ctrl and dma resources") Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 28 Jul 2020 23:15:07 +0000 (16:15 -0700)]
devlink: ignore -EOPNOTSUPP errors on dumpit
Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:
$ devlink dev info
devlink answers: Operation not supported
Dump should not report an error just because the last device
to be queried could not provide an answer.
To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.
Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Tue, 28 Jul 2020 23:03:56 +0000 (00:03 +0100)]
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()") Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When read netdevsim trap_flow_action_cookie, we need to init it first,
or we will get "Invalid argument" error.
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 25 Jul 2020 22:40:53 +0000 (15:40 -0700)]
ipv6: fix memory leaks on IPV6_ADDRFORM path
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.
Fixes: 6955a76fbcd5 ("bpfilter: switch to kernel_write") Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
Paolo Bonzini [Thu, 30 Jul 2020 22:10:26 +0000 (18:10 -0400)]
Merge tag 'kvmarm-fixes-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for Linux 5.8, take #3
- Fix a corner case of a new mapping inheriting exec permission without
and yet bypassing invalidation of the I-cache
- Make sure PtrAuth predicates oinly generate inline code for the
non-VHE hypervisor code
Bluetooth: fix kernel oops in store_pending_adv_report
Fix kernel oops observed when an ext adv data is larger than 31 bytes.
This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes. The issue is not sensitive to the advertisement
content. In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'. See stack trace below.
This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A couple of last minute bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-mem: Fix build error due to improper use 'select'
virtio_balloon: fix up endian-ness for free cmd id
virtio-balloon: Document byte ordering of poison_val
vhost/scsi: fix up req type endian-ness
firmware: Fix a reference count leak.
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'pci-v5.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Disable ASPM on ASM1083/1085 PCIe-to-PCI bridge (Robert Hancock)"
* tag 'pci-v5.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Aaron Ma [Thu, 18 Jun 2020 06:54:53 +0000 (14:54 +0800)]
e1000e: continue to init PHY even when failed to disable ULP
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows
for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")'
break out of init phy:
When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.
Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Merge tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three NVMe fixes"
* tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block:
nvme: add a Identify Namespace Identification Descriptor list quirk
nvme-pci: prevent SK hynix PC400 from using Write Zeroes command
nvme-tcp: fix possible hang waiting for icresp response
Merge tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small fixes for corner/error cases"
* tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block:
io_uring: fix lockup in io_fail_links()
io_uring: fix ->work corruption with poll_add
random: fix circular include dependency on arm64 after addition of percpu.h
Daniel Díaz and Kees Cook independently reported that commit f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Reported-by: Kees Cook <keescook@chromium.org> Tested-by: Marc Zyngier <maz@kernel.org> Fixes: f227e3ec3b5c Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Murphy [Thu, 30 Jul 2020 09:56:49 +0000 (10:56 +0100)]
arm64: csum: Fix handling of bad packets
Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...
Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers") Reported-by: guodeqing <geffrey.guo@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Marc Zyngier [Thu, 30 Jul 2020 09:53:05 +0000 (10:53 +0100)]
arm64: Drop unnecessary include from asm/smp.h
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825
("arm64: simplify ptrauth initialization") removed the keys from the
secondary_data structure.
This also cures a compilation issue introduced by f227e3ec3b5c
("random32: update the net random state on interrupt and activity").
Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization") Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
Sami Tolvanen [Thu, 30 Jul 2020 15:37:01 +0000 (08:37 -0700)]
arm64/alternatives: move length validation inside the subsection
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.
Weilong Chen [Fri, 19 Jun 2020 08:03:33 +0000 (16:03 +0800)]
virtio-mem: Fix build error due to improper use 'select'
As noted in:
https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt
"select should be used with care. select will force a symbol to a
value without visiting the dependencies."
Config VIRTIO_MEM should not select CONTIG_ALLOC directly.
Otherwise it will cause an error:
https://bugzilla.kernel.org/show_bug.cgi?id=208245
Signed-off-by: Weilong Chen <chenweilong@huawei.com> Link: https://lore.kernel.org/r/20200619080333.194753-1-chenweilong@huawei.com Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
Mazin Rezk [Mon, 27 Jul 2020 05:40:46 +0000 (05:40 +0000)]
drm/amd/display: Clear dm_state for fast updates
This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:
1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.
2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.
3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.
4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.
Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.
This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <1i5t5.duncan@cox.net> Signed-off-by: Mazin Rezk <mnrzk@protonmail.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Peilin Ye [Tue, 28 Jul 2020 19:29:24 +0000 (15:29 -0400)]
drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>