Merge tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, sub-page block support for uncompressed files is
available. It's mainly used to enable original signing ('golden')
4k-block images on arm64 with 16/64k pages. In addition, end users
could also use this feature to build a manifest to directly refer to
golden tar data.
Besides, long xattr name prefix support is also introduced in this
cycle to avoid too many xattrs with the same prefix (e.g. overlayfs
xattrs). It's useful for erofs + overlayfs combination (like Composefs
model): the image size is reduced by ~14% and runtime performance is
also slightly improved.
Others are random fixes and cleanups as usual.
Summary:
- Add sub-page block size support for uncompressed files
- Support flattened block device for multi-blob images to be attached
into virtual machines (including cloud servers) and bare metals
- Support long xattr name prefixes to optimize images with common
xattr namespaces (e.g. files with overlayfs xattrs) use cases
- Various minor cleanups & fixes"
* tag 'erofs-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cleanup i_format-related stuffs
erofs: sunset erofs_dbg()
erofs: fix potential overflow calculating xattr_isize
erofs: get rid of z_erofs_fill_inode()
erofs: enable long extended attribute name prefixes
erofs: handle long xattr name prefixes properly
erofs: add helpers to load long xattr name prefixes
erofs: introduce on-disk format for long xattr name prefixes
erofs: move packed inode out of the compression part
erofs: keep meta inode into erofs_buf
erofs: initialize packed inode after root inode is assigned
erofs: stop parsing non-compact HEAD index if clusterofs is invalid
erofs: don't warn ztailpacking feature anymore
erofs: simplify erofs_xattr_generic_get()
erofs: rename init_inode_xattrs with erofs_ prefix
erofs: move several xattr helpers into xattr.c
erofs: tidy up EROFS on-disk naming
erofs: support flattened block device for multi-blob images
erofs: set block size to the on-disk block size
erofs: avoid hardcoded blocksize for subpage block support
Merge tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs open fixlet from Christian Brauner:
"EINVAL ist keinmal: This contains the changes to make O_DIRECTORY when
specified together with O_CREAT an invalid request.
The wider background is that a regression report about the behavior of
O_DIRECTORY | O_CREAT was sent to fsdevel about a behavior that was
changed multiple years and LTS releases earlier during v5.7
development.
This has also been covered in
https://lwn.net/Articles/926782/
which provides an excellent summary of the discussion"
* tag 'v6.4/vfs.open' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
open: return EINVAL for O_DIRECTORY | O_CREAT
Merge tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a pile of various smaller fixes. Most of them aren't
very interesting so this just highlights things worth mentioning:
- Various filesystems contained the same little helper to convert
from the mode of a dentry to the DT_* type of that dentry.
They have now all been switched to rely on the generic
fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)
- Fsnotify now reports ACCESS and MODIFY events for splice
(Chung-Chiang Cheng)
- After converting timerfd a long time ago to rely on
wait_event_interruptible_*() apis, convert eventfd as well. This
removes the complex open-coded wait code (Wen Yang)
- Simplify sysctl registration for devpts, avoiding the declaration
of two tables. Instead, just use a prefixed path with
register_sysctl() (Luis)
- The setattr_should_drop_sgid() helper is now exported so NFS can
use it. By switching NFS to this helper an NFS setgid inheritance
bug is fixed (me)"
* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
pnode: pass mountpoint directly
eventfd: use wait_event_interruptible_locked_irq() helper
splice: report related fsnotify events
fs: consolidate duplicate dt_type helpers
nfs: use vfs setgid helper
Update relatime comments to include equality
fs/buffer: Remove redundant assignment to err
fs_context: drop the unused lsm_flags member
fs/namespace: fnic: Switch to use %ptTd
Documentation: update idmappings.rst
devpts: simplify two-level sysctl registration for pty_kern_table
eventpoll: align comment with nested epoll limitation
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
Merge tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds a new pidfd_prepare() helper which allows the caller to
reserve a pidfd number and allocates a new pidfd file that stashes the
provided struct pid.
It should be avoided installing a file descriptor into a task's file
descriptor table just to close it again via close_fd() in case an
error occurs. The fd has been visible to userspace and might already
be in use. Instead, a file descriptor should be reserved but not
installed into the caller's file descriptor table.
If another failure path is hit then the reserved file descriptor and
file can just be put without any userspace visible side-effects. And
if all failure paths are cleared the file descriptor and file can be
installed into the task's file descriptor table.
This helper is now used in all places that open coded this
functionality before. For example, this is currently done during
copy_process() and fanotify used pidfd_create(), which returns a pidfd
that has already been made visibile in the caller's file descriptor
table, but then closed it using close_fd().
In one of the next merge windows there is also new functionality
coming to unix domain sockets that will have to rely on
pidfd_prepare()"
* tag 'v6.4/pidfd.file' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fanotify: use pidfd_prepare()
fork: use pidfd_prepare()
pid: add pidfd_prepare()
Merge tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull user work thread updates from Christian Brauner:
"This contains the work generalizing the ability to create a kernel
worker from a userspace process.
Such user workers will run with the same credentials as the userspace
process they were created from providing stronger security and
accounting guarantees than the traditional override_creds() approach
ever could've hoped for.
The original work was heavily based and optimzed for the needs of
io_uring which was the first user. However, as it quickly turned out
the ability to create user workers inherting properties from a
userspace process is generally useful.
The vhost subsystem currently creates workers using the kthread api.
The consequences of using the kthread api are that RLIMITs don't work
correctly as they are inherited from khtreadd. This leads to bugs
where more workers are created than would be allowed by the RLIMITs of
the userspace process in lieu of which workers are created.
Problems like this disappear with user workers created from the
userspace processes for which they perform the work. In addition,
providing this api allows vhost to remove additional complexity. For
example, cgroup and mm sharing will just work out of the box with user
workers based on the relevant userspace process instead of manually
ensuring the correct cgroup and mm contexts are used.
So the vhost subsystem should simply be made to use the same mechanism
as io_uring. To this end the original mechanism used for
create_io_thread() is generalized into user workers:
- Introduce PF_USER_WORKER as a generic indicator that a given task
is a user worker, i.e., a kernel task that was created from a
userspace process. Now a PF_IO_WORKER thread is just a specialized
version of PF_USER_WORKER. So io_uring io workers raise both flags.
- Make copy_process() available to core kernel code
- Extend struct kernel_clone_args with the following bitfields
allowing to indicate to copy_process():
- to create a user worker (raise PF_USER_WORKER)
- to not inherit any files from the userspace process
- to ignore signals
After all generic changes are in place the vhost subsystem implements
a new dedicated vhost api based on user workers. Finally, vhost is
switched to rely on the new api moving it off of kthreads.
Thanks to Mike for sticking it out and making it through this rather
arduous journey"
* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
vhost: use vhost_tasks for worker threads
vhost: move worker thread fields to new struct
vhost_task: Allow vhost layer to use copy_process
fork: allow kernel code to call copy_process
fork: Add kernel_clone_args flag to ignore signals
fork: add kernel_clone_args flag to not dup/clone files
fork/vm: Move common PF_IO_WORKER behavior to new flag
kernel: Make io_thread and kthread bit fields
kthread: Pass in the thread's name during creation
kernel: Allow a kernel thread's name to be set in copy_process
csky: Remove kernel_thread declaration
Merge tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 selftest fix from Christian Brauner:
"This is a single fix to the clone3() selftstests.
It fell through the sefltest tree cracks a few times so I'll provide
it here. It has low urgency but we should still correctly report the
number of tests"
* tag 'v6.4/kernel.clone3.tests' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: fix number of tests in ksft_set_plan
Pull documentation updates from Jonathan Corbet:
"Commit volume in documentation is relatively low this time, but there
is still a fair amount going on, including:
- Reorganize the architecture-specific documentation under
Documentation/arch
This makes the structure match the source directory and helps to
clean up the mess that is the top-level Documentation directory a
bit. This work creates the new directory and moves x86 and most of
the less-active architectures there.
The current plan is to move the rest of the architectures in 6.5,
with the patches going through the appropriate subsystem trees.
- Some more Spanish translations and maintenance of the Italian
translation
- A new "Kernel contribution maturity model" document from Ted
- A new tutorial on quickly building a trimmed kernel from Thorsten
Plus the usual set of updates and fixes"
* tag 'docs-6.4' of git://git.lwn.net/linux: (47 commits)
media: Adjust column width for pdfdocs
media: Fix building pdfdocs
docs: clk: add documentation to log which clocks have been disabled
docs: trace: Fix typo in ftrace.rst
Documentation/process: always CC responsible lists
docs: kmemleak: adjust to config renaming
ELF: document some de-facto PT_* ABI quirks
Documentation: arm: remove stih415/stih416 related entries
docs: turn off "smart quotes" in the HTML build
Documentation: firmware: Clarify firmware path usage
docs/mm: Physical Memory: Fix grammar
Documentation: Add document for false sharing
dma-api-howto: typo fix
docs: move m68k architecture documentation under Documentation/arch/
docs: move parisc documentation under Documentation/arch/
docs: move ia64 architecture docs under Documentation/arch/
docs: Move arc architecture docs under Documentation/arch/
docs: move nios2 documentation under Documentation/arch/
docs: move openrisc documentation under Documentation/arch/
docs: move superh documentation under Documentation/arch/
...
Merge tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- several fixes to kunit tool
- new klist structure test
- support for m68k under QEMU
- support for overriding the QEMU serial port
- support for SH under QEMU
* tag 'linux-kselftest-kunit-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: add tests for using current KUnit test field
kunit: tool: Add support for SH under QEMU
kunit: tool: Add support for overriding the QEMU serial port
.gitignore: Unignore .kunitconfig
list: test: Test the klist structure
kunit: increase KUNIT_LOG_SIZE to 2048 bytes
kunit: Use gfp in kunit_alloc_resource() kernel-doc
kunit: tool: fix pre-existing `mypy --strict` errors and update run_checks.py
kunit: tool: remove unused imports and variables
kunit: tool: add subscripts for type annotations where appropriate
kunit: fix bug of extra newline characters in debugfs logs
kunit: fix bug in the order of lines in debugfs logs
kunit: fix bug in debugfs logs of parameterized tests
kunit: tool: Add support for m68k under QEMU
Merge tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- several patches to enhance and fix resctrl test
- nolibc support for kselftest with an addition to vprintf() to
tools/nolibc/stdio and related test changes
- Refactor 'peeksiginfo' ptrace test part
- add 'malloc' failures checks in cgroup test_memcontrol
- a new prctl test
- enhancements sched test with additional ore schedule prctl calls
* tag 'linux-kselftest-next-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests/resctrl: Fix incorrect error return on test complete
selftests/resctrl: Remove duplicate codes that clear each test result file
selftests/resctrl: Commonize the signal handler register/unregister for all tests
selftests/resctrl: Cleanup properly when an error occurs in CAT test
selftests/resctrl: Flush stdout file buffer before executing fork()
selftests/resctrl: Return MBA check result and make it to output message
selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test
selftests/resctrl: Use correct exit code when tests fail
kselftest/arm64: Convert za-fork to use kselftest.h
kselftest: Support nolibc
tools/nolibc/stdio: Implement vprintf()
selftests/resctrl: Correct get_llc_perf() param in function comment
selftests/resctrl: Use remount_resctrlfs() consistently with boolean
selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH
selftests/resctrl: Change initialize_llc_perf() return type to void
selftests/resctrl: Replace obsolete memalign() with posix_memalign()
selftests/resctrl: Check for return value after write_schemata()
selftests/resctrl: Allow ->setup() to return errors
selftests/resctrl: Move ->setup() call outside of test specific branches
selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem
...
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
Merge tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add support for loongarch
- Fix stack-protector issues
- Support additional integral types and signal-related macros
- Add support for stdin, stdout, and stderr
- Add getuid() and geteuid()
- Allow S_I* macros to be overridden by program
- Defer to linux/fcntl.h and linux/stat.h to avoid duplicate
definitions
- Many improvements to the selftests
* tag 'nolibc.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (22 commits)
tools/nolibc: x86_64: add stackprotector support
tools/nolibc: i386: add stackprotector support
tools/nolibc: tests: add test for -fstack-protector
tools/nolibc: tests: fold in no-stack-protector cflags
tools/nolibc: add support for stack protector
tools/nolibc: tests: constify test_names
tools/nolibc: add helpers for wait() signal exits
tools/nolibc: add definitions for standard fds
selftests/nolibc: Adjust indentation for Makefile
selftests/nolibc: Add support for LoongArch
tools/nolibc: Add support for LoongArch
tools/nolibc: Add statx() and make stat() rely on statx() if necessary
tools/nolibc: Include linux/fcntl.h and remove duplicate code
tools/nolibc: check for S_I* macros before defining them
selftests/nolibc: skip the chroot_root and link_dir tests when not privileged
tools/nolibc: add getuid() and geteuid()
tools/nolibc: add tests for the integer limits in stdint.h
tools/nolibc: enlarge column width of tests
tools/nolibc: add integer types and integer limit macros
tools/nolibc: add stdint.h
...
Merge tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull locktorture updates from Paul McKenney:
"This adds tests for nested locking and also adds support for testing
raw spinlocks in PREEMPT_RT kernels"
* tag 'locktorture.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locktorture: Add raw_spinlock* torture tests for PREEMPT_RT kernels
locktorture: With nested locks, occasionally skip main lock
locktorture: Add nested locking to rtmutex torture tests
locktorture: Add nested locking to mutex torture tests
locktorture: Add nested_[un]lock() hooks and nlocks parameter
Merge tag 'lkmm-scripting.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull Linux Kernel Memory Model scripting updates from Paul McKenney:
"This improves litmus-test documentation and improves the ability to do
before/after tests on the https://github.com/paulmckrcu/litmus repo"
* tag 'lkmm-scripting.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
tools/memory-model: Remove out-of-date SRCU documentation
tools/memory-model: Document LKMM test procedure
tools/memory-model: Use "grep -E" instead of "egrep"
tools/memory-model: Use "-unroll 0" to keep --hw runs finite
tools/memory-model: Make judgelitmus.sh handle scripted Result: tag
tools/memory-model: Add data-race capabilities to judgelitmus.sh
tools/memory-model: Add checktheselitmus.sh to run specified litmus tests
tools/memory-model: Repair parseargs.sh header comment
tools/memory-model: Add "--" to parseargs.sh for additional arguments
tools/memory-model: Make history-check scripts use mselect7
tools/memory-model: Make checkghlitmus.sh use mselect7
tools/memory-model: Fix scripting --jobs argument
tools/memory-model: Implement --hw support for checkghlitmus.sh
tools/memory-model: Add -v flag to jingle7 runs
tools/memory-model: Make runlitmus.sh check for jingle errors
tools/memory-model: Allow herd to deduce CPU type
tools/memory-model: Keep assembly-language litmus tests
tools/memory-model: Move from .AArch64.litmus.out to .litmus.AArch.out
tools/memory-model: Make runlitmus.sh generate .litmus.out for --hw
tools/memory-model: Split runlitmus.sh out of checklitmus.sh
...
Merge tag 'lkmm.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull Linux Kernel Memory Model updates from Paul McKenney
"This improves LKMM diagnostic messages, unifies handling of the
ordering produced by unlock/lock pairs, adds support for the
smp_mb__after_srcu_read_unlock() macro, removes redundant members from
the to-r relation, brings SRCU read-side semantics into alignment with
Linux-kernel SRCU, makes ppo a subrelation of po, and improves
documentation"
* tag 'lkmm.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
Documentation: litmus-tests: Correct spelling
tools/memory-model: Add documentation about SRCU read-side critical sections
tools/memory-model: Make ppo a subrelation of po
tools/memory-model: Provide exact SRCU semantics
tools/memory-model: Restrict to-r to read-read address dependency
tools/memory-model: Add smp_mb__after_srcu_read_unlock()
tools/memory-model: Unify UNLOCK+LOCK pairings to po-unlock-lock-po
tools/memory-model: Update some warning labels
Merge tag 'kcsan.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"Kernel concurrency sanitizer (KCSAN) updates for v6.4
This fixes kernel-doc warnings and also updates instrumentation from
READ_ONCE() to volatile in order to avoid unaligned load-acquire
instructions on arm64 in kernels built with LTO"
* tag 'kcsan.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Avoid READ_ONCE() in read_instrumented_memory()
instrumented.h: Fix all kernel-doc format warnings
Merge tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- The .machine keyring, used for Machine Owner Keys (MOK), acquired the
ability to store only CA enforced keys, and put rest to the .platform
keyring, thus separating the code signing keys from the keys that are
used to sign certificates.
This essentially unlocks the use of the .machine keyring as a trust
anchor for IMA. It is an opt-in feature, meaning that the additional
contraints won't brick anyone who does not care about them.
- Enable interrupt based transactions with discrete TPM chips (tpm_tis).
There was code for this existing but it never really worked so I
consider this a new feature rather than a bug fix. Before the driver
just fell back to the polling mode.
Link: https://lore.kernel.org/linux-integrity/a93b6222-edda-d43c-f010-a59701f2aeef@gmx.de/ Link: https://lore.kernel.org/linux-integrity/20230302164652.83571-1-eric.snowberg@oracle.com/
* tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (29 commits)
tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
tpm_tis: fix stall after iowrite*()s
tpm/tpm_tis_synquacer: Convert to platform remove callback returning void
tpm/tpm_tis: Convert to platform remove callback returning void
tpm/tpm_ftpm_tee: Convert to platform remove callback returning void
tpm: tpm_tis_spi: Mark ACPI and OF related data as maybe unused
tpm: st33zp24: Mark ACPI and OF related data as maybe unused
tpm, tpm_tis: Enable interrupt test
tpm, tpm_tis: startup chip before testing for interrupts
tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
tpm, tpm_tis: Claim locality in interrupt handler
tpm, tpm_tis: Request threaded interrupt handler
tpm, tpm: Implement usage counter for locality
tpm, tpm_tis: do not check for the active locality in interrupt handler
tpm, tpm_tis: Move interrupt mask checks into own function
tpm, tpm_tis: Only handle supported interrupts
tpm, tpm_tis: Claim locality before writing interrupt registers
tpm, tpm_tis: Do not skip reset of original interrupt vector
tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
...
Merge tag 'Smack-for-6.4' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"There are two changes, one small and one more substantial:
- Remove of an unnecessary cast
- The mount option processing introduced with the mount rework makes
copies of mount option values. There is no good reason to make
copies of Smack labels, as they are maintained on a list and never
removed.
The code now uses pointers to entries on the list, reducing
processing time and memory use"
* tag 'Smack-for-6.4' of https://github.com/cschaufler/smack-next:
Smack: Improve mount process memory use
smack_lsm: remove unnecessary type casting
Merge tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock update from Mickaël Salaün:
"Improve user space documentation"
* tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right
Merge tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM hook comment blocks into security/security.c
For many years the LSM hook comment blocks were located in a very odd
place, include/linux/lsm_hooks.h, where they lived on their own,
disconnected from both the function prototypes and definitions.
In keeping with current kernel conventions, this moves all of these
comment blocks to the top of the function definitions, transforming
them into the kdoc format in the process. This should make it much
easier to maintain these comments, which are the main source of LSM
hook documentation.
For the most part the comment contents were left as-is, although some
glaring errors were corrected. Expect additional edits in the future
as we slowly update and correct the comment blocks.
This is the bulk of the diffstat.
- Introduce LSM_ORDER_LAST
Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
specify LSMs which should be ordered after "normal" LSMs.
This is one of the prerequisites for transitioning IMA/EVM to a
proper LSM.
- Remove the security_old_inode_init_security() hook
The security_old_inode_init_security() LSM hook only allows for a
single xattr which is problematic both for LSM stacking and the
IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
security_inode_init_security() hook and removes the single-xattr LSM
hook.
- Fix a reiserfs problem with security xattrs
During the security_old_inode_init_security() removal work it became
clear that reiserfs wasn't handling security xattrs properly so we
fixed it.
* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
reiserfs: Add security prefix to xattr name in reiserfs_security_write()
security: Remove security_old_inode_init_security()
ocfs2: Switch to security_inode_init_security()
reiserfs: Switch to security_inode_init_security()
security: Remove integrity from the LSM list in Kconfig
Revert "integrity: double check iint_cache was initialized"
security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
device_cgroup: Fix typo in devcgroup_css_alloc description
lsm: fix a badly named parameter in security_get_getsecurity()
lsm: fix doc warnings in the LSM hook comments
lsm: styling fixes to security/security.c
lsm: move the remaining LSM hook comments to security/security.c
lsm: move the io_uring hook comments to security/security.c
lsm: move the perf hook comments to security/security.c
lsm: move the bpf hook comments to security/security.c
lsm: move the audit hook comments to security/security.c
lsm: move the binder hook comments to security/security.c
lsm: move the sysv hook comments to security/security.c
lsm: move the key hook comments to security/security.c
lsm: move the xfrm hook comments to security/security.c
...
Merge tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Stop passing the 'selinux_state' pointers as function arguments
As discussed during the end of the last development cycle, passing a
selinux_state pointer through the SELinux code has a noticeable
impact on performance, and with the current code it is not strictly
necessary.
This simplifies things by referring directly to the single
selinux_state global variable which should help improve SELinux
performance.
- Uninline the unlikely portions of avc_has_perm_noaudit()
This change was also based on a discussion from the last development
cycle, and is heavily based on an initial proof of concept patch from
you. The core issue was that avc_has_perm_noaudit() was not able to
be inlined, as intended, due to its size. We solved this issue by
extracting the less frequently hit portions of avc_has_perm_noaudit()
into a separate function, reducing the size of avc_has_perm_noaudit()
to the point where the compiler began inlining the function. We also
took the opportunity to clean up some ugly RCU locking in the code
that became uglier with the change.
- Remove the runtime disable functionality
After several years of work by the userspace and distro folks, we are
finally in a place where we feel comfortable removing the runtime
disable functionality which we initially deprecated at the start of
2020.
There is plenty of information in the kernel's deprecation (now
removal) notice, but the main motivation was to be able to safely
mark the LSM hook structures as '__ro_after_init'.
LWN also wrote a good summary of the deprecation this morning which
offers a more detailed history:
The original checkreqprot deprecation notice stated that the removal
would happen no sooner than June 2021, which means this falls hard
into the "better late than never" bucket.
The Kconfig and deprecation notice has more detail on this setting,
but the basic idea is that we want to ensure that the SELinux policy
allows for the memory protections actually applied by the kernel, and
not those requested by the process.
While we haven't found anyone running a supported distro that is
affected by this deprecation/removal, anyone who is affected would
only need to update their policy to reflect the reality of their
applications' mapping protections.
- Minor Makefile improvements
Some minor Makefile improvements to correct some dependency issues
likely only ever seen by SELinux developers. I expect we will have at
least one more tweak to the Makefile during the next merge window,
but it didn't quite make the cutoff this time around.
* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: ensure av_permissions.h is built when needed
selinux: fix Makefile dependencies of flask.h
selinux: stop returning node from avc_insert()
selinux: clean up dead code after removing runtime disable
selinux: update the file list in MAINTAINERS
selinux: remove the runtime disable functionality
selinux: remove the 'checkreqprot' functionality
selinux: stop passing selinux_state pointers and their offspring
selinux: uninline unlikely parts of avc_has_perm_noaudit()
Merge branch 'x86-rep-insns': x86 user copy clarifications
Merge my x86 user copy updates branch.
This cleans up a lot of our x86 memory copy code, particularly for user
accesses. I've been pushing for microarchitectural support for good
memory copying and clearing for a long while, and it's been visible in
how the kernel has aggressively used 'rep movs' and 'rep stos' whenever
possible.
And that micro-architectural support has been improving over the years,
to the point where on modern CPU's the best option for a memory copy
that would become a function call (as opposed to being something that
can just be turned into individual 'mov' instructions) is now to inline
the string instruction sequence instead.
However, that only makes sense when we have the modern markers for this:
the x86 FSRM and FSRS capabilities ("Fast Short REP MOVS/STOS").
So this cleans up a lot of our historical code, gets rid of the legacy
marker use ("REP_GOOD" and "ERMS") from the memcpy/memset cases, and
replaces it with that modern reality. Note that REP_GOOD and ERMS end
up still being used by the known large cases (ie page copyin gand
clearing).
The reason much of this ends up being about user memory accesses is that
the normal in-kernel cases are done by the compiler (__builtin_memcpy()
and __builtin_memset()) and getting to the point where we can use our
instruction rewriting to inline those to be string instructions will
need some compiler support.
In contrast, the user accessor functions are all entirely controlled by
the kernel code, so we can change those arbitrarily.
Thanks to Borislav Petkov for feedback on the series, and Jens testing
some of this on micro-architectures I didn't personally have access to.
* x86-rep-insns:
x86: rewrite '__copy_user_nocache' function
x86: remove 'zerorest' argument from __copy_user_nocache()
x86: set FSRS automatically on AMD CPUs that have FSRM
x86: improve on the non-rep 'copy_user' function
x86: improve on the non-rep 'clear_user' function
x86: inline the 'rep movs' in user copies for the FSRM case
x86: move stac/clac from user copy routines into callers
x86: don't use REP_GOOD or ERMS for user memory clearing
x86: don't use REP_GOOD or ERMS for user memory copies
x86: don't use REP_GOOD or ERMS for small memory clearing
x86: don't use REP_GOOD or ERMS for small memory copies
Use the same pattern as the compat version of this code does: instead of
copying the whole array to a kernel buffer and then having a separate
phase of verifying it, just do it one entry at a time, verifying as you
go.
On Jens' /dev/zero readv() test this improves performance by ~6%.
[ This was obviously triggered by Jens' ITER_UBUF updates series ]
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM development updates from Russell King:
"Four changes for v6.4:
- simplify the path to the top vmlinux
- three patches to fix vfp with instrumentation enabled (eg lockdep)"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
ARM: 9293/1: vfp: Pass successful return address via register R3
ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
ARM: 9291/1: decompressor: simplify the path to the top vmlinux
Ruihan Li [Mon, 24 Apr 2023 16:21:10 +0000 (00:21 +0800)]
scripts: Remove ICC-related dead code
Intel compiler support has already been completely removed in commit 95207db8166a ("Remove Intel compiler support"). However, it appears
that there is still some ICC-related code in scripts/cc-version.sh.
There is no harm in leaving the code as it is, but removing the dead
code makes the codebase a bit cleaner.
Hopefully all ICC-related stuff in the build scripts will be removed
after this commit, given the grep output as below:
Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().
Cc: stable@vger.kernel.org Reported-by: Martin Dimov <martin@dmarto.com> Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/ Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Tested-by: Martin Dimov <martin@dmarto.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Haris Okanovic [Wed, 19 Apr 2023 15:41:30 +0000 (17:41 +0200)]
tpm_tis: fix stall after iowrite*()s
ioread8() operations to TPM MMIO addresses can stall the CPU when
immediately following a sequence of iowrite*()'s to the same region.
For example, cyclitest measures ~400us latency spikes when a non-RT
usermode application communicates with an SPI-based TPM chip (Intel Atom
E3940 system, PREEMPT_RT kernel). The spikes are caused by a
stalling ioread8() operation following a sequence of 30+ iowrite8()s to
the same address. I believe this happens because the write sequence is
buffered (in CPU or somewhere along the bus), and gets flushed on the
first LOAD instruction (ioread*()) that follows.
The enclosed change appears to fix this issue: read the TPM chip's
access register (status code) after every iowrite*() operation to
amortize the cost of flushing data to chip across multiple instructions.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Link: https://lore.kernel.org/r/20230323153436.B2SATnZV@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Uwe Kleine-König [Mon, 20 Mar 2023 08:06:07 +0000 (09:06 +0100)]
tpm/tpm_tis_synquacer: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Uwe Kleine-König [Mon, 20 Mar 2023 08:06:06 +0000 (09:06 +0100)]
tpm/tpm_tis: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Uwe Kleine-König [Mon, 20 Mar 2023 08:06:05 +0000 (09:06 +0100)]
tpm/tpm_ftpm_tee: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
ftpm_tee_remove() returns zero unconditionally (and cannot easily
converted to return void). So ignore the return value to be able to make
ftpm_plat_tee_remove() return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm: st33zp24: Mark ACPI and OF related data as maybe unused
The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making
drivers/char/tpm/st33zp24/i2c.c:141:34: error: ‘of_st33zp24_i2c_match’ defined but not used [-Werror=unused-const-variable=]
drivers/char/tpm/st33zp24/spi.c:258:34: error: ‘of_st33zp24_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:38 +0000 (14:55 +0100)]
tpm, tpm_tis: Enable interrupt test
The test for interrupts in tpm_tis_send() is skipped if the flag
TPM_CHIP_FLAG_IRQ is not set. Since the current code never sets the flag
initially the test is never executed.
Fix this by setting the flag in tpm_tis_gen_interrupt() right after
interrupts have been enabled and before the test is executed.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:37 +0000 (14:55 +0100)]
tpm, tpm_tis: startup chip before testing for interrupts
In tpm_tis_gen_interrupt() a request for a property value is sent to the
TPM to test if interrupts are generated. However after a power cycle the
TPM responds with TPM_RC_INITIALIZE which indicates that the TPM is not
yet properly initialized.
Fix this by first starting the TPM up before the request is sent. For this
the startup implementation is removed from tpm_chip_register() and put
into the new function tpm_chip_startup() which is called before the
interrupts are tested.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:36 +0000 (14:55 +0100)]
tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.
Fixes: 45baa1d1fa39 ("tpm_tis: Re-enable interrupts upon (S3) resume") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:35 +0000 (14:55 +0100)]
tpm, tpm_tis: Claim locality in interrupt handler
Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:34 +0000 (14:55 +0100)]
tpm, tpm_tis: Request threaded interrupt handler
The TIS interrupt handler at least has to read and write the interrupt
status register. In case of SPI both operations result in a call to
tpm_tis_spi_transfer() which uses the bus_lock_mutex of the spi device
and thus must only be called from a sleepable context.
To ensure this request a threaded interrupt handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:33 +0000 (14:55 +0100)]
tpm, tpm: Implement usage counter for locality
Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.
By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:32 +0000 (14:55 +0100)]
tpm, tpm_tis: do not check for the active locality in interrupt handler
After driver initialization tpm_tis_data->locality may only be modified in
case of a LOCALITY CHANGE interrupt. In this case the interrupt handler
iterates over all localities only to assign the active one to
tpm_tis_data->locality.
However this information is never used any more, so the assignment is not
needed.
Furthermore without the assignment tpm_tis_data->locality cannot change any
more at driver runtime, and thus no protection against concurrent
modification is required when the variable is read at other places.
So remove this iteration entirely.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:30 +0000 (14:55 +0100)]
tpm, tpm_tis: Only handle supported interrupts
According to the TPM Interface Specification (TIS) support for "stsValid"
and "commandReady" interrupts is only optional.
This has to be taken into account when handling the interrupts in functions
like wait_for_tpm_stat(). To determine the supported interrupts use the
capability query.
Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
changes. After that process all the remaining status changes by polling
the status register.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:29 +0000 (14:55 +0100)]
tpm, tpm_tis: Claim locality before writing interrupt registers
In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.
Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:28 +0000 (14:55 +0100)]
tpm, tpm_tis: Do not skip reset of original interrupt vector
If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.
Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.
Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:27 +0000 (14:55 +0100)]
tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:26 +0000 (14:55 +0100)]
tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Lino Sanfilippo [Thu, 24 Nov 2022 13:55:25 +0000 (14:55 +0100)]
tpm, tpm_tis: Avoid cache incoherency in test for interrupts
The interrupt handler that sets the boolean variable irq_tested may run on
another CPU as the thread that checks irq_tested as part of the irq test in
tpm_tis_send().
Since nothing guarantees cache coherency between CPUs for unsynchronized
accesses to boolean variables the testing thread might not perceive the
value change done in the interrupt handler.
Avoid this issue by setting the bit TPM_TIS_IRQ_TESTED in the flags field
of the tpm_tis_data struct and by accessing this field with the bit
manipulating functions that provide cache coherency.
Also convert all other existing sites to use the proper macros when
accessing this bitfield.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Eric Snowberg [Thu, 2 Mar 2023 16:46:52 +0000 (11:46 -0500)]
integrity: machine keyring CA configuration
Add machine keyring CA restriction options to control the type of
keys that may be added to it. The motivation is separation of
certificate signing from code signing keys. Subsquent work will
limit certificates being loaded into the IMA keyring to code
signing keys used for signature verification.
When no restrictions are selected, all Machine Owner Keys (MOK) are added
to the machine keyring. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is
selected, the CA bit must be true. Also the key usage must contain
keyCertSign, any other usage field may be set as well.
When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must
be true. Also the key usage must contain keyCertSign and the
digitialSignature usage may not be set.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Acked-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3 Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Eric Snowberg [Thu, 2 Mar 2023 16:46:48 +0000 (11:46 -0500)]
KEYS: Add missing function documentation
Compiling with 'W=1' results in warnings that 'Function parameter or member
not described'
Add the missing parameters for
restrict_link_by_builtin_and_secondary_trusted and
restrict_link_to_builtin_trusted.
Use /* instead of /** for get_builtin_and_secondary_restriction, since
it is a static function.
Fix wrong function name restrict_link_to_builtin_trusted.
Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically") Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Eric Snowberg [Thu, 2 Mar 2023 16:46:47 +0000 (11:46 -0500)]
KEYS: Create static version of public_key_verify_signature
The kernel test robot reports undefined reference to
public_key_verify_signature when CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is
not defined. Create a static version in this case and return -EINVAL.
Fixes: db6c43bd2132 ("crypto: KEYS: convert public key and digsig asym to the akcipher api") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Petr Vorel <pvorel@suse.cz> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Mark Hasemeyer [Tue, 14 Mar 2023 19:54:04 +0000 (13:54 -0600)]
tpm: cr50: i2c: use jiffies to wait for tpm ready irq
When waiting for a tpm ready completion, the cr50 i2c driver incorrectly
assumes that the value of timeout_a is represented in milliseconds
instead of jiffies.
Remove the msecs_to_jiffies conversion.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
We started disabling '-Warray-bounds' for gcc-12 originally on s390,
because it resulted in some warnings that weren't realistically fixable
(commit 8b202ee21839: "s390: disable -Warray-bounds").
That s390-specific issue was then found to be less common elsewhere, but
generic (see f0be87c42cbd: "gcc-12: disable '-Warray-bounds' universally
for now"), and then later expanded the version check was expanded to
gcc-11 (5a41237ad1d4: "gcc: disable -Warray-bounds for gcc-11 too").
And it turns out that I was much too optimistic in thinking that it's
all going to go away, and here we are with gcc-13 showing all the same
issues. So instead of expanding this one version at a time, let's just
disable it for gcc-11+, and put an end limit to it only when we actually
find a solution.
Yes, I'm sure some of this is because the kernel just does odd things
(like our "container_of()" use, but also knowingly playing games with
things like linker tables and array layouts).
And yes, some of the warnings are likely signs of real bugs, but when
there are hundreds of false positives, that doesn't really help.
Tomi Valkeinen [Tue, 7 Mar 2023 01:34:28 +0000 (10:34 +0900)]
media: Fix building pdfdocs
Commit 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") added
documentation for a few new RGB formats. The table has column-width
specifiers for 34 columns used in pdfdocs build.
However, the new table has a couple of rows with 35 columns which
confused Sphinx's latex builder. The resulting .tex file causes
an error in a later stage of a pdfdocs build.
Remove the trailing empty dash lines to fix the issue.
Fixes: 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") Reported-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/12250823-8445-5854-dfb8-b92c0ff0851e@gmail.com/ Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Akira Yokosawa <akiyks@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
[akiyks: explain the cause of build error] Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/29380b3e-1daa-3aef-1749-dbd9960ba620@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Merge tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the prefix in the kernel source tarball
- Fix a typo in the copyright file in Debian package
* tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use proper prefix for tarballs to fix rpm-pkg build error
kbuild: deb-pkg: Fix a spell typo in mkdebian script
Merge tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Remove an over-zealous sanity check of the array of MSI-X vectors to
be allocated for a device
* tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()
Merge tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov
- Fix for older binutils which do not support C-syntax constant
suffixes
* tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Do not use integer constant suffixes in inline asm
Merge tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a check in pegasus-notetaker driver to validate the type of pipe when
probing a new device
- a fix for Cypress touch controller to correctly parse maximum number
of touches.
* tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyttsp5 - fix sensing configuration data structure
Input: pegasus-notetaker - check pipe type when probing
kbuild: use proper prefix for tarballs to fix rpm-pkg build error
Since commit f8d94c4e403c ("kbuild: do not create intermediate *.tar
for source tarballs"), 'make rpm-pkg' fails because the prefix of the
source tarball is 'linux.tar/' instead of 'linux/'. $(basename $@)
strips only '.gz' from the filename linux.tar.gz.
You need to strip two suffixes from compressed tarballs and one suffix
from uncompressed tarballs (for example 'perf-6.3.0.tar' generated by
'make perf-tar-src-pkg').
One tricky fix might be --prefix=$(firstword $(subst .tar, ,$@))/
but I think it is better to hard-code the prefix.
Fixes: f8d94c4e403c ("kbuild: do not create intermediate *.tar for source tarballs") Reported-by: Jiwei Sun <sunjw10@lenovo.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two serious ARM fixes:
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the user
register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be
lost"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()
KVM: arm64: Make vcpu flag updates non-preemptible
Merge tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 client fixes:
- two important fixes for unbuffered read regression with the
iov_iter changes (e.g. read soon after mount in some multichannel
scenarios)
- DFS prefix path fix (also for stable)"
* tag '6.3-rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Reapply lost fix from commit 30b2b2196d6e
cifs: Fix unbuffered read
cifs: avoid dup prefix path in dfs_get_automount_devname()
Paolo Bonzini [Fri, 21 Apr 2023 23:19:02 +0000 (19:19 -0400)]
Merge tag 'kvmarm-fixes-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #4
- Plug a buffer overflow due to the use of the user-provided register
width for firmware regs. Outright reject accesses where the
user register width does not match the kernel representation.
- Protect non-atomic RMW operations on vCPU flags against preemption,
as an update to the flags by an intervening preemption could be lost.
Merge tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two patches fixing the problem with aync discard.
The default settings had a low IOPS limit and processing a large batch
to discard would take a long time. On laptops this can cause increased
power consumption due to disk activity.
As async discard has been on by default since 6.2 this likely affects
a lot of users.
Summary:
- increase the default IOPS limit 10x which reportedly helped
- setting the sysfs IOPS value to 0 now does not throttle anymore
allowing the discards to be processed at full speed. Previously
there was an arbitrary 6 hour target for processing the pending
batch"
* tag 'for-6.3-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
Merge tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some last-minute tiny driver fixes for 6.3-final. They
include fixes for some fpga and iio drivers:
- fpga bridge driver fix
- fpga dfl error reporting fix
- fpga m10bmc driver fix
- fpga xilinx driver fix
- iio light driver fix
- iio dac fwhandle leak fix
- iio adc driver fix
All of these have been in linux-next for a few weeks with no reported
problems"
* tag 'char-misc-6.3-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: light: tsl2772: fix reading proximity-diodes from device tree
fpga: bridge: properly initialize bridge device before populating children
iio: dac: ad5755: Add missing fwnode_handle_put()
iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()
fpga: xilinx-pr-decoupler: Use readl wrapper instead of pure readl
fpga: dfl-pci: Drop redundant pci_enable_pcie_error_reporting()
fpga: m10bmc-sec: Fix rsu_send_data() to return FW_UPLOAD_ERR_HW_ERROR
Merge tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use raw_spinlocks in regmaps that are used in interrupt context in
gpio-104-idi-48 and gpio-104-dio-48e
* tag 'gpio-fixes-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: 104-idi-48: Enable use_raw_spinlock for idi48_regmap_config
gpio: 104-dio-48e: Enable use_raw_spinlock for dio48e_regmap_config
Merge tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes: all small and device-specific (ASoC FSL, SOF, and
HD-audio quirks), should be safe to apply at the last minute"
* tag 'sound-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: fsl_asrc_dma: fix potential null-ptr-deref
ASoC: fsl_sai: Fix pins setting for i.MX8QM platform
ALSA: hda/realtek: Remove specific patch for Dell Precision 3260
ASoC: max98373: change power down sequence for smart amp
ASoC: SOF: pm: Tear down pipelines only if DSP was active
ASoC: SOF: ipc4-topology: Clarify bind failure caused by missing fw_module
Merge tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is the regular and hopefully last round of fixes for 6.3.
Pretty small, a few amdgpu, one i915, one nouveau, one rockchip and
one gpu scheduler fix:
nouveau:
- fix dma-resv timeout
rockchip:
- fix suspend/resume
sched:
- fix timeout handling
i915:
- Fix fast wake AUX sync len
amdgpu:
- GPU reset fix
- DCN 3.1.5 line buffer fix
- Display fix for single channel memory configs
- Fix a possible divide by 0"
* tag 'drm-fixes-2023-04-21' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: fix a divided-by-zero error
drm/amd/display: limit timing for single dimm memory
drm/amd/display: set dcn315 lb bpp to 48
drm/amdgpu: Fix desktop freezed after gpu-reset
drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume
drm/nouveau: fix incorrect conversion to dma_resv_wait_timeout()
drm/rockchip: vop2: fix suspend/resume
drm/i915: Fix fast wake AUX sync len
drm/sched: Check scheduler ready before calling timeout handling
I didn't really want to do this, but as part of all the other changes to
the user copy loops, I've been looking at this horror.
I tried to clean it up multiple times, but every time I just found more
problems, and the way it's written, it's just too hard to fix them.
For example, the code is written to do quad-word alignment, and will use
regular byte accesses to get to that point. That's fairly simple, but
it means that any initial 8-byte alignment will be done with cached
copies.
However, the code then is very careful to do any 4-byte _tail_ accesses
using an uncached 4-byte write, and that was claimed to be relevant in
commit a82eee742452 ("x86/uaccess/64: Handle the caching of 4-byte
nocache copies properly in __copy_user_nocache()").
So if you do a 4-byte copy using that function, it carefully uses a
4-byte 'movnti' for the destination. But if you were to do a 12-byte
copy that is 4-byte aligned, it would _not_ do a 4-byte 'movnti'
followed by a 8-byte 'movnti' to keep it all uncached.
Instead, it would align the destination to 8 bytes using a
byte-at-a-time loop, and then do a 8-byte 'movnti' for the final 8
bytes.
The main caller that cares is __copy_user_flushcache(), which knows
about this insanity, and has odd cases for it all. But I just can't
deal with looking at this kind of "it does one case right, and another
related case entirely wrong".
And the code really wasn't fixable without hard drugs, which I try to
avoid.
So instead, rewrite it in a form that hopefully not only gets this
right, but is a bit more maintainable. Knock wood.
Brian Masney [Tue, 11 Apr 2023 19:21:53 +0000 (15:21 -0400)]
docs: clk: add documentation to log which clocks have been disabled
The existing clk documentation has a section that talks about the
clk_ignore_unused kernel parameter. Add additional documentation that
describes how to log which clocks the kernel disables on bootup. This
will log messages like the following to the console on bootup:
Documentation/process: always CC responsible lists
The "Select the recipients for your patch" part about CC-ing mailing
lists is a bit vague and might be understood that only some lists should
be Cc-ed. That's not what most of the maintainers expect. For given
code, associated mailing list must always be CC-ed, because the list is
used for reviewing and testing patches. Example are the Devicetree
bindings patches, which are tested iff Devicetree mailing list is CC-ed.
Commit c87db8ca0902 ("kmemleak-test: fix kmemleak_test.c build logic")
essentially renames the config DEBUG_KMEMLEAK_TEST to SAMPLE_KMEMLEAK, but
misses to adjust the documentation.
Adjust kmemleak documentation to this config renaming.
Documentation: arm: remove stih415/stih416 related entries
ST's STiH415 and STiH416 platforms support have been removed since
a long time already. This commit updates the sti related documentation
overview to remove related entries and update the sti part to add
STiH407/STiH410 and STiH418 platforms which are still actively
supported.
Jonathan Corbet [Thu, 20 Apr 2023 15:34:35 +0000 (09:34 -0600)]
docs: turn off "smart quotes" in the HTML build
We have long disabled the "html_use_smartypants" option to prevent Sphinx
from mangling "--" sequences (among others). Unfortunately, Sphinx changed
that option to "smartquotes" in the 1.6.6 release, and seemingly didn't see
fit to warn about the use of the obsolete option, resulting in the
aforementioned mangling returning. Disable this behavior again and hope
that the option name stays stable for a while.
Boris Burkov [Wed, 5 Apr 2023 19:43:59 +0000 (12:43 -0700)]
btrfs: reinterpret async discard iops_limit=0 as no delay
Currently, a limit of 0 results in a hard coded metering over 6 hours.
Since the default is a set limit, I suspect no one truly depends on this
rather arbitrary setting. Repurpose it for an arguably more useful
"unlimited" mode, where the delay is 0.
Note that if block groups are too new, or go fully empty, there is still
a delay associated with those conditions. Those delays implement
heuristics for not trimming a region we are relatively likely to fully
overwrite soon.
CC: stable@vger.kernel.org # 6.2+ Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Wed, 5 Apr 2023 19:43:58 +0000 (12:43 -0700)]
btrfs: set default discard iops_limit to 1000
Previously, the default was a relatively conservative 10. This results
in a 100ms delay, so with ~300 discards in a commit, it takes the full
30s till the next commit to finish the discards. On a workstation, this
results in the disk never going idle, wasting power/battery, etc.
Set the default to 1000, which results in using the smallest possible
delay, currently, which is 1ms. This has shown to not pathologically
keep the disk busy by the original reporter.
Turns out the channelmap variable is not actually read-only, it's modified
through the MCI_GPM_CLR_CHANNEL_BIT() macro further down in the function,
so making it read-only causes page faults when that code is hit.
* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
rust: allow to use INIT_STACK_ALL_ZERO
rust: fix regexp in scripts/is_rust_module.sh
rust: build: Fix grep warning
scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
rust: kernel: Mark rust_fmt_argument as extern "C"
rust: sort uml documentation arch support table
rust: str: fix requierments->requirements typo
Rob Herring [Wed, 19 Apr 2023 19:35:13 +0000 (14:35 -0500)]
PCI: Restrict device disabled status check to DT
Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.
Note that the original implementation leaked a refcount which is now
correctly handled.
[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
blk-mq sched bio merge still needs request to grab queue usage counter,
so we can't simply call blk_mq_attempt_bio_merge() when queue usage
counter isn't held.
Fixes: 23f3e3272e7a ("block: Merge bio before checking ->cached_rq") Cc: Xiao Ni <xni@redhat.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230420112018.1108058-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vladimir Oltean [Tue, 18 Apr 2023 15:59:02 +0000 (18:59 +0300)]
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
There is a structural problem in switchdev, where the flag bits in
struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only
represent a simplified / denatured view of what's in struct
net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc).
Each time we want to pass more information about struct
net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info
(here, BR_FDB_STATIC), we find that FDB entries were already notified to
switchdev with no regard to this flag, and thus, switchdev drivers had
no indication whether the notified entries were static or not.
For example, this command:
ip link add br0 type bridge && ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic
has never worked as intended with switchdev. It causes a struct
net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has
a single flag set: BR_FDB_ADDED_BY_USER.
This is further passed to the switchdev notifier chain, where interested
drivers have no choice but to assume this is a static (does not age) and
sticky (does not migrate) FDB entry. So currently, all drivers offload
it to hardware as such, as can be seen below ("offload" is set).
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 offload master br0
The software FDB entry expires $ageing_time centiseconds after the
kernel last sees a packet with this MAC SA, and the bridge notifies its
deletion as well, so it eventually disappears from hardware too.
This is a problem, because it is actually desirable to start offloading
"master dynamic" FDB entries correctly - they should expire $ageing_time
centiseconds after the *hardware* port last sees a packet with this
MAC SA - and this is how the current incorrect behavior was discovered.
With an offloaded data plane, it can be expected that software only sees
exception path packets, so an otherwise active dynamic FDB entry would
be aged out by software sooner than it should.
With the change in place, these FDB entries are no longer offloaded:
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 master br0
and this also constitutes a better way (assuming a backport to stable
kernels) for user space to determine whether the kernel has the
capability of doing something sane with these or not.
As opposed to "master dynamic" FDB entries, on the current behavior of
which no one currently depends on (which can be deduced from the lack of
kselftests), Ido Schimmel explains that entries with the "extern_learn"
flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev,
since the spectrum driver listens to them (and this is kind of okay,
because although they are treated identically to "static", they are
expected to not age, and to roam).
projects / mirror_ubuntu-kernels.git / log