This patch adds the basic code of FUJITSU Extended Socket
Network Device driver.
When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR"
to check if "PNP0C02" is for Extended Socket device driver
and retrieves ACPI resource information. Then creates
platform_device.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Aug 2015 17:34:40 +0000 (10:34 -0700)]
Merge branch 'ila-precompute'
Tom Herbert says:
====================
ila: Precompute checksums
This patch set:
- Adds argument ot LWT build_state that holds a pointer to the fib
configuration being applied to the new route
- Adds support in ILA to precompute checksum difference for
performance optimization
v2:
- Move return argument in build_state to end of arguments
v3:
- Update the signature for ip6_tun_build_state()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 24 Aug 2015 16:45:42 +0000 (09:45 -0700)]
ila: Precompute checksum difference for translations
In the ILA build state for LWT compute the checksum difference to apply
to transport checksums that include the IPv6 pseudo header. The
difference is between the route destination (from fib6_config) and the
locator to write.
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Mon, 24 Aug 2015 16:45:41 +0000 (09:45 -0700)]
lwt: Add cfg argument to build_state
Add cfg and family arguments to lwt build state functions. cfg is a void
pointer and will either be a pointer to a fib_config or fib6_config
structure. The family parameter indicates which one (either AF_INET
or AF_INET6).
LWT encpasulation implementation may use the fib configuration to build
the LWT state.
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 Aug 2015 03:42:57 +0000 (20:42 -0700)]
Merge tag 'nfc-next-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.3 pull request
This is the NFC pull request for 4.3.
With this one we have:
- A new driver for Samsung's S3FWRN5 NFC chipset. In order to
properly support this driver, a few NCI core routines needed
to be exported. Future drivers like Intel's Fields Peak will
benefit from this.
- SPI support as a physical transport for STM st21nfcb.
- An additional netlink API for sending replies back to userspace
from vendor commands.
- 2 small fixes for TI's trf7970a
- A few st-nci fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Fri, 21 Aug 2015 10:41:14 +0000 (12:41 +0200)]
route: fix breakage after moving lwtunnel state
__recnt and related fields need to be in its own cacheline for performance
reasons. Commit 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered.
This patch fixes the breakage by moving the lwtunnel state to the end of
dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline
with __refcnt and may affect performance, thus further patches may be
needed.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 23 Aug 2015 23:28:18 +0000 (16:28 -0700)]
Merge tag 'linux-can-next-for-4.3-20150820' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
this is a pull request of a two patches for net-next.
The first patch is by Nik Nyby and fixes a typo in a function name. The
second patch by Lucas Stach demotes register output to debug level.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 23 Aug 2015 23:14:46 +0000 (16:14 -0700)]
Merge branch 'tipc-failover-fixes'
Jon Maloy says:
====================
tipc: fix link failover/synch problems
We fix three problems with the new link failover/synch implementation,
which was introduced earlier in this release cycle. They are all related
to situations where there is a very short interval between the disabling
and enabling of interfaces.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:56 +0000 (02:12 -0400)]
tipc: fix stale link problem during synchronization
Recent changes to the link synchronization means that we can now just
drop packets arriving on the synchronizing link before the synch point
is reached. This has lead to significant simplifications to the
implementation, but also turns out to have a flip side that we need
to consider.
Under unlucky circumstances, the two endpoints may end up
repeatedly dropping each other's packets, while immediately
asking for retransmission of the same packets, just to drop
them once more. This pattern will eventually be broken when
the synch point is reached on the other link, but before that,
the endpoints may have arrived at the retransmission limit
(stale counter) that indicates that the link should be broken.
We see this happen at rare occasions.
The fix for this is to not ask for retransmissions when a link is in
state LINK_SYNCHING. The fact that the link has reached this state
means that it has already received the first SYNCH packet, and that it
knows the synch point. Hence, it doesn't need any more packets until the
other link has reached the synch point, whereafter it can go ahead and
ask for the missing packets.
However, because of the reduced traffic on the synching link that
follows this change, it may now take longer to discover that the
synch point has been reached. We compensate for this by letting all
packets, on any of the links, trig a check for synchronization
termination. This is possible because the packets themselves don't
contain any information that is needed for discovering this condition.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:55 +0000 (02:12 -0400)]
tipc: interrupt link synchronization when a link goes down
When we introduced the new link failover/synch mechanism
in commit 6e498158a827fd515b514842e9a06bdf0f75ab86
("tipc: move link synch and failover to link aggregation level"),
we missed the case when the non-tunnel link goes down during the link
synchronization period. In this case the tunnel link will remain in
state LINK_SYNCHING, something leading to unpredictable behavior when
the failover procedure is initiated.
In this commit, we ensure that the node and remaining link goes
back to regular communication state (SELF_UP_PEER_UP/LINK_ESTABLISHED)
when one of the parallel links goes down. We also ensure that we don't
re-enter synch mode if subsequent SYNCH packets arrive on the remaining
link.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:54 +0000 (02:12 -0400)]
tipc: eliminate risk of premature link setup during failover
When a link goes down, and there is still a working link towards its
destination node, a failover is initiated, and the failed link is not
allowed to re-establish until that procedure is finished. To ensure
this, the concerned link endpoints are set to state LINK_FAILINGOVER,
and the node endpoints to NODE_FAILINGOVER during the failover period.
However, if the link reset is due to a disabled bearer, the corres-
ponding link endpoint is deleted, and only the node endpoint knows
about the ongoing failover. Now, if the disabled bearer is re-enabled
during the failover period, the discovery mechanism may create a new
link endpoint that is ready to be established, despite that this is not
permitted. This situation may cause both the ongoing failover and any
subsequent link synchronization to fail.
In this commit, we ensure that a newly created link goes directly to
state LINK_FAILINGOVER if the corresponding node state is
NODE_FAILINGOVER. This eliminates the problem described above.
Furthermore, we tighten the criteria for which packets are allowed
to end a failover state in the function tipc_node_check_state().
By checking that the receiving link is up and running, instead of just
checking that it is not in failover mode, we eliminate the risk that
protocol packets from the re-created link may cause the failover to
be prematurely terminated.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 23 Aug 2015 23:08:54 +0000 (16:08 -0700)]
Merge branch 'nps_enet_fixes'
Noam Camus says:
====================
*** nps_enet fixups ***
Change v2
TX done is handled back with NAPI poll.
Change v1
This patch set is a bunch of fixes to make nps_enet work correctly with
all platforms, i.e. real device, emulation system, and simulation system.
The main trigger for this patch set was that in our emulation system
the TX end interrupt is "edge-sensitive" and therefore we cannot use the
cause register since it is not sticky.
Also:
TX is handled during HW interrupt context and not NAPI job.
race with TX done was fixed.
added acknowledge for TX when device is "level sensitive".
enable drop of control frames which is not needed for regular usage.
So most of this patch set is about TX handling, which is now more complete.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Noam Camus [Thu, 20 Aug 2015 05:00:05 +0000 (08:00 +0300)]
NET: nps_enet: minor namespace cleanup
We define buf_int_enable in the minimal namespace it is used. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Noam Camus [Thu, 20 Aug 2015 05:00:02 +0000 (08:00 +0300)]
NET: nps_enet: TX done race condition
We need to set tx_skb pointer before send frame.
If we receive interrupt before we set pointer we will try
to free SKB with wrong pointer.
Now we are sure that SKB pointer will never be NULL during
handling TX done and check is removed.
Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Noam Camus [Thu, 20 Aug 2015 05:00:01 +0000 (08:00 +0300)]
NET: nps_enet: replace use of cause register
When interrupt is received we read directly from control
register for RX/TX instead of reading cause register
since this register fails to indicate TX done when
TX interrupt is "edge mode".
Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 23 Aug 2015 22:59:57 +0000 (15:59 -0700)]
Merge branch 'gro_tunnels'
Tom Herbert says:
====================
gro: Fixes for tunnels and GRO
This patch set addresses some issue related to tunneling and GRO:
- Fix remote checksum offload to properly deal with frag0 in GRO.
- Add support for GRO at VXLAN tunnel (call gro_cells)
Testing: Ran one netperf TCP_STREAM to highlight impact of different
configurations:
GUE
Zero UDP checksum
4628.42 MBps
UDP checksums enabled
6800.51 MBps
UDP checksums and remote checksum offload
7663.82 MBps
UDP checksums and remote checksum offload using no-partial
7287.25 MBps
VXLAN
Zero UDP checksum
4112.02
UDP checksums enabled
6785.80 MBps
UDP checksums and remote checksum offload
7075.56 MBps
v2:
- Drop "gro: Pull headers into skb head for 1st skb in gro list"
from patch set
- In vxlan_remcsum and gue_remcsum return immediately if remcsum
processing was already done
- Add gro callbacks for sit offload
- Use WARN_ON_ONCE if we get a GUE protocol that does not have
GRO offload support
v3:
- Don't restore gro callbacks for sit offload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Thu, 20 Aug 2015 00:07:32 +0000 (17:07 -0700)]
gro: Fix remcsum offload to deal with frags in GRO
The remote checksum offload GRO did not consider the case that frag0
might be in use. This patch fixes that by accessing headers using the
skb_gro functions and not saving offsets relative to skb->head.
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Wed, 19 Aug 2015 22:54:55 +0000 (18:54 -0400)]
net: dsa: mv88e6xxx: set 802.1Q mode to Fallback
The current Secure port mode requires the port-based VLANs to also be
valid in the 802.1Q VLAN Table Unit. The current hardware bridging
support only configures the port-based VLANs, thus is broken.
A new patchset is required to adapt the hardware bridging code to fully
support the Secure port mode.
In the meantime, change the 802.1Q mode of every ports to Fallback,
which filtering is more permissive, and doesn't add this restriction to
handle port-based and tagged-based VLANs.
Fixes: 8efdda4a1b60 ("net: dsa: mv88e6xxx: use port 802.1Q mode Secure") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter updates for net-next
This is second pull request includes the conflict resolution patch that
resulted from the updates that we got for the conntrack template through
kmalloc. No changes with regards to the previously sent 15 patches.
The following patchset contains Netfilter updates for your net-next tree, they
are:
1) Rework the existing nf_tables counter expression to make it per-cpu.
2) Prepare and factor out common packet duplication code from the TEE target so
it can be reused from the new dup expression.
3) Add the new dup expression for the nf_tables IPv4 and IPv6 families.
4) Convert the nf_tables limit expression to use a token-based approach with
64-bits precision.
5) Enhance the nf_tables limit expression to support limiting at packet byte.
This comes after several preparation patches.
6) Add a burst parameter to indicate the amount of packets or bytes that can
exceed the limiting.
7) Add netns support to nfacct, from Andreas Schultz.
8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow
accessing more zone specific information, from Daniel Borkmann.
9) Allow to define zone per-direction to support netns containers with
overlapping network addressing, also from Daniel.
10) Extend the CT target to allow setting the zone based on the skb->mark as a
way to support simple mappings from iptables, also from Daniel.
11) Make the nf_tables payload expression aware of the fact that VLAN offload
may have removed a vlan header, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Aug 2015 00:06:11 +0000 (17:06 -0700)]
Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
Jiri Benc [Thu, 20 Aug 2015 11:56:32 +0000 (13:56 +0200)]
ipv6: route: per route IP tunnel metadata via lightweight tunnel
Allow specification of per route IP tunnel instructions also for IPv6.
This complements commit 3093fbe7ff4b ("route: Per route IP tunnel metadata
via lightweight tunnel").
Signed-off-by: Jiri Benc <jbenc@redhat.com> CC: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:31 +0000 (13:56 +0200)]
ipv6: route: extend flow representation with tunnel key
Use flowi_tunnel in flowi6 similarly to what is done with IPv4.
This complements commit 1b7179d3adff ("route: Extend flow representation
with tunnel key").
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:30 +0000 (13:56 +0200)]
vxlan: metadata based tunneling for IPv6
Support metadata based (formerly flow based) tunneling also for IPv6.
This complements commit ee122c79d422 ("vxlan: Flow based tunneling").
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:26 +0000 (13:56 +0200)]
ipv6: drop metadata dst in ip6_route_input
The fix in commit 48fb6b554501 is incomplete, as now ip6_route_input can be
called with non-NULL dst if it's a metadata dst and the reference is leaked.
Drop the reference.
Fixes: 48fb6b554501 ("ipv6: fix crash over flow-based vxlan device") Fixes: ee122c79d422 ("vxlan: Flow based tunneling") CC: Wei-Chun Chao <weichunc@plumgrid.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:25 +0000 (13:56 +0200)]
route: move lwtunnel state to dst_entry
Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.
As a bonus, this brings a nice diffstat.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:23 +0000 (13:56 +0200)]
ip_tunnels: add IPv6 addresses to ip_tunnel_key
Add the IPv6 addresses as an union with IPv4 ones. When using IPv4, the
newly introduced padding after the IPv4 addresses needs to be zeroed out.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 20 Aug 2015 11:56:20 +0000 (13:56 +0200)]
ip_tunnels: remove custom alignment and packing
The custom alignment of struct ip_tunnel_key is unnecessary. In struct
sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the
first field.
The structure is also packed even without the __packed keyword.
Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Wed, 19 Aug 2015 18:40:31 +0000 (11:40 -0700)]
net: Fix nexthop lookups
Andreas reported breakage adding routes with local nexthops:
$ ip route show table main
...
172.28.0.0/24 dev vnf-xe1p0 proto kernel scope link src 172.28.0.16
$ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0
RTNETLINK answers: Resource temporarily unavailable
3bfd847203c changed the lookup to use the passed in table but for cases like
this the nexthop is in the local table rather than the passed in table.
Fixes: 3bfd847203c ("net: Use passed in table for nexthop lookups") Reported-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Scott Feldman [Wed, 19 Aug 2015 18:29:35 +0000 (11:29 -0700)]
bridge: fix netlink max attr size
.maxtype should match .policy. Probably just been getting lucky here
because IFLA_BRPORT_MAX > IFLA_BR_MAX.
Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Linton [Wed, 19 Aug 2015 16:46:43 +0000 (11:46 -0500)]
smsc911x: Remove dev==NULL check.
The dev==NULL check in smsc911x_probe_config is useless
and isn't providing any additional protection. If a fwnode
doesn't exist then an appropriate error should be returned
by device_get_phy_mode() covering the original case
of a missing of/fwnode.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds MAC address length check back into
the device_get_mac_addr() function before calling
is_valid_ether_addr() similar to the way the OF
routine does it.
Update the comments for the two new functions.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 20 Aug 2015 21:13:25 +0000 (14:13 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
Major changes:
ath10k:
* add support for qca99x0 family of devices
* improve performance of tx_lock
* add support for raw mode (802.11 frame format) and software crypto
engine enabled via a module parameter
ath9k:
* add fast-xmit support
wil6210:
* implement TSO support
* support bootloader v1 and onwards
iwlwifi:
* Deprecate -10.ucode
* Clean ups towards multiple Rx queues
* Add support for longer CMD IDs. This will be required by new
firmwares since we are getting close to the u8 limit.
* bugfixes for the D0i3 power state
* Add basic support for FTM
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 20 Aug 2015 21:10:23 +0000 (14:10 -0700)]
Merge branch 'ewma'
Johannes Berg says:
====================
average: convert users to inline implementation
Since there's very little benefit of the out-of-line implementation
(a single byte of .text in one driver as far as I've seen), convert
all drivers to the inline implementation, saving memory, and remove
the out-of-line implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 19 Aug 2015 07:46:21 +0000 (09:46 +0200)]
rt2x00: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in code that's one
byte larger (for me), but reduces struct link_ant and struct link
size by the two unsigned long values that store the parameters each.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Wed, 19 Aug 2015 07:48:40 +0000 (09:48 +0200)]
virtio_net: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in no change in code
size for me, but reduces the struct receive_queue size by the two
unsigned long values that store the parameters.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 20 Aug 2015 20:01:57 +0000 (13:01 -0700)]
Merge branch 'vrf-cleanups-part-2'
Nikolay Aleksandrov says:
====================
vrf: cleanups part 2
This is the next part of vrf cleanups, patch 1 drops the SLAB_PANIC
when creating kmem cache since it's handled, patch 02 removes a slave
duplicate check which is already done by the lower/upper code, patch 3
moves the ndo_add_slave code around a bit so we can drop an error
label and patch 4 drops the master device checks which are unnecessary
because the ops are taken from the master device itself so it can't be
different.
====================
When ndo_add|del_slave ops are used, they're taken from the respective
master device's netdev ops, so if the master device is a VRF only then
the VRF ops will get called thus no need to check the type of the
master.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
vrf: move vrf_insert_slave so we can drop a goto label
We can simplify do_vrf_add_slave by moving vrf_insert_slave in the end
of the enslaving and thus eliminate an error goto label. It always
succeeds and isn't needed before that anyway.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
nfc: netlink: Add capability to reply to vendor_cmd with data
A proprietary vendor command may send back useful data to the user
application.
For example, the field level applied on the NFC router antenna.
Still based on net/wireless/nl80211.c implementation,
add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in
order to send back over netlink data generated by a proprietary
command.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Currently whenever a packet different from ETH_P_IP is sent through the
VRF device it is leaked so plug the leaks and properly drop these
packets.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Baldyga [Thu, 20 Aug 2015 15:26:01 +0000 (17:26 +0200)]
NFC: nci: export nci_core_reset and nci_core_init
Some drivers needs to have ability to reinit NCI core, for example
after updating firmware in setup() of post_setup() callback. This
patch makes nci_core_reset() and nci_core_init() functions public,
to make it possible.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Robert Baldyga [Thu, 20 Aug 2015 15:26:00 +0000 (17:26 +0200)]
NFC: nci: Add post_setup handler
Some drivers require non-standard configuration after NCI_CORE_INIT
request, because they need to know ndev->manufact_specific_info or
ndev->manufact_id. This patch adds post_setup handler allowing to do
such custom configuration.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Torvalds [Thu, 20 Aug 2015 19:08:38 +0000 (12:08 -0700)]
Merge tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a small collecton of sound fix patches.
The most significant one is the disablement of newly introduced
topology API. Its ABI couldn't be stabilized enough, so we decided to
delay for 4.3 in the end. Other than that, all oneliner fixes: a
USB-audio runtime PM fix and a couple of HD-audio quirks"
* tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211)
ALSA: usb-audio: Fix runtime PM unbalance
ASoC: topology: Disable use from userspace
ASoC: topology: Add Kconfig option for topology
ALSA: hda - Fix the white noise on Dell laptop
Pull SCSI target fixes from Nicholas Bellinger:
"This contains a v4.2-rc specific RCU module unload regression bug-fix,
a long-standing iscsi-target bug-fix for duplicate target_xfer_tags
during NOP processing from Alexei, and two more small REPORT_LUNs
emulation related patches to make Solaris FC host LUN scanning happy
from Roland.
There is also one patch not included that allows target-core to limit
the number of fabric driver SGLs per I/O request using residuals, that
is currently required as a work-around for FC hosts which don't honor
EVPD block-limits settings. At this point, it will most likely become
for-next material"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix handling of small allocation lengths in REPORT LUNS
target: REPORT LUNS should return LUN 0 even for dynamic ACLs
target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT
target: Perform RCU callback barrier before backend/fabric unload
Linus Torvalds [Thu, 20 Aug 2015 18:32:33 +0000 (11:32 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal fixes from Eduardo Valentin:
"Last minute fixes on the thermal-soc tree. There is a fix of a long
lasting bug in cpu cooling device, thanks for RMK for being pushing
this"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal/cpu_cooling: update policy limits if clipped_freq < policy->max
thermal/cpu_cooling: rename max_freq as clipped_freq in notifier
thermal/cpu_cooling: rename cpufreq_val as clipped_freq
thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier
thermal/cpu_cooling: quit early after updating policy
thermal/cpu_cooling: No need to initialize max_freq to 0
thermal: cpu_cooling: fix lockdep problems in cpu_cooling
thermal: power_allocator: do not use devm* interfaces
David Vrabel [Thu, 20 Aug 2015 10:33:41 +0000 (11:33 +0100)]
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
Since commit feb44f1f7a4ac299d1ab1c3606860e70b9b89d69 (x86/xen:
Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need
a full APIC driver and thus should depend on X86_LOCAL_APIC.
This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by
disabling Xen support in this configuration.
Users needing Xen support in a non-SMP i386 kernel will need to enable
CONFIG_X86_UP_APIC.
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
Lucas Stach [Fri, 7 Aug 2015 15:16:03 +0000 (17:16 +0200)]
can: flexcan: demote register output to debug level
This message isn't really helpful for the general reader of the kernel
logs, so should not be printed with info level. All other register
programming outputs in the flexcan driver already use the debug level.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
vrf: vrf_master_ifindex_rcu is not always called with rcu read lock
While running net-next I hit this:
[ 634.073119] ===============================
[ 634.073150] [ INFO: suspicious RCU usage. ]
[ 634.073182] 4.2.0-rc6+ #45 Not tainted
[ 634.073213] -------------------------------
[ 634.073244] include/net/vrf.h:38 suspicious rcu_dereference_check()
usage!
[ 634.073274]
other info that might help us debug this:
It would seem vrf_master_ifindex_rcu() can be called without RCU held in
other contexts as well so introduce a new helper which acquires rcu and
returns the ifindex.
Also add curly braces around both the "if" and "else" parts as per the
style guide.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Wed, 19 Aug 2015 07:46:17 +0000 (15:46 +0800)]
lwtunnel: Fix the sparse warnings in fib_encap_match
When CONFIG_LWTUNNEL config is not enabled, the lwtstate_free() is not
declared in lwtunnel.h at all. However, even in this case, the function
is still referenced in fib_semantics.c so that there appears the
following sparse warnings:
net/ipv4/fib_semantics.c:553:17: error: undefined identifier 'lwtstate_free'
CC net/ipv4/fib_semantics.o
net/ipv4/fib_semantics.c: In function ‘fib_encap_match’:
net/ipv4/fib_semantics.c:553:3: error: implicit declaration of function ‘lwtstate_free’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[1]: *** [net/ipv4/fib_semantics.o] Error 1
make: *** [net/ipv4/fib_semantics.o] Error 2
To eliminate the error, we define an empty function for lwtstate_free()
in lwtunnel.h when CONFIG_LWTUNNEL is disabled.
Fixes: df383e6240ef ("lwtunnel: fix memory leak") Cc: Jiri Benc <jbenc@redhat.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Greer [Wed, 19 Aug 2015 15:58:52 +0000 (08:58 -0700)]
NFC: trf7970a: Add NULL check to clear up smatch warning
Although it should be unnecessary, add a NULL pointer check
to trf7970a_send_upstream() to eliminate a smatch warning.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Greer [Wed, 19 Aug 2015 15:57:58 +0000 (08:57 -0700)]
NFC: trf7970a: SDD_EN is bit 5 not bit 3
The SDD_EN bit in the NFC Target Detection Level Register
is bit 5 not bit 3 so change the TRF7970A_NFC_TARGET_LEVEL_SDD_EN
macro accordingly.
Reported-by: Raymond Lei <Raymond.Lei@ecolab.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Takashi Iwai [Wed, 19 Aug 2015 16:31:54 +0000 (18:31 +0200)]
Merge tag 'asoc-v4.2-disable-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Disable topology support for v4.2
The topology code merged in the v4.2 merge window introduced a new ABI
which was believed to be suitable for use but subsequently additional
work by the developers of this feature have revealed some problems that
need to be addressed. In order to allow this to be done without having
to support the initial ABI add Kconfig to disable the build and also add
some #error statements to the UAPI header so users can't use them.
Takashi Iwai [Wed, 19 Aug 2015 05:20:14 +0000 (07:20 +0200)]
ALSA: usb-audio: Fix runtime PM unbalance
The fix for deadlock in PM in commit [1ee23fe07ee8: ALSA: usb-audio:
Fix deadlocks at resuming] introduced a new check of in_pm flag.
However, the brainless patch author evaluated it in a wrong way
(logical AND instead of logical OR), thus usb_autopm_get_interface()
is wrongly called at probing, leading to unbalance of runtime PM
refcount.
This patch fixes it by correcting the logic.
Reported-by: Hans Yang <hansy@nvidia.com> Fixes: 1ee23fe07ee8 ('ALSA: usb-audio: Fix deadlocks at resuming') Cc: <stable@vger.kernel.org> [v3.15+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
Florian Westphal [Mon, 17 Aug 2015 16:09:55 +0000 (18:09 +0200)]
netfilter: nft_payload: work around vlan header stripping
make payload expression aware of the fact that VLAN offload may have
removed a vlan header.
When we encounter tagged skb, transparently insert the tag into the
register so that vlan header matching can work without userspace being
aware of offload features.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Roland Dreier [Fri, 14 Aug 2015 04:59:19 +0000 (21:59 -0700)]
target: Fix handling of small allocation lengths in REPORT LUNS
REPORT LUNS should not fail just because the allocation length is less
than 16. The relevant section of SPC-4 is:
4.2.5.6 Allocation length
The ALLOCATION LENGTH field specifies the maximum number of bytes or
blocks that an application client has allocated in the Data-In
Buffer. The ALLOCATION LENGTH field specifies bytes unless a
different requirement is stated in the command definition.
An allocation length of zero specifies that no data shall be
transferred. This condition shall not be considered an error.
So we should just truncate our response rather than return an error.
Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
David S. Miller [Wed, 19 Aug 2015 03:21:32 +0000 (20:21 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-08-18
This series contains updates to igb, e100, e1000e and ixgbe.
Shota Suzuki provides a fix for a possible overflow in
igb_set_interrupt_capability() which leads to an oops. When changing the
number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same
manner as when initializing the igb driver.
Vasily Averin provides a fix for a missing rtnl_unlock() for when we
error out due to not being able to allocate memory for our queues.
Stefan Assman provides a couple of fixes for igb/igbvf. First changes
the igb driver in probe to simply call igb_enable_sriov() instead of
igb_sriov_reinit() since we are starting from scratch. Then in igbvf,
fix the driver where it does not clear the buffer_info->dma in all
cases after calling dma_unmap_single(), which was found by changing the
MTU twice.
Richard Cochran implements the periodic output function using the
programmable clock outputs available in i210 when possible, falling
back to the target time for longer periods.
Todd adds support for the Marvell PHY 1512 which is required for i354
devices. Then updates igb to make sure SR-IOV init uses the correct
number of queues, since recent changes could result in the PF holding
onto all of the queues.
Alex Williamson provides a fix in the case where a guest OS does not
support hot-unplug, so disable SR-IOV prior to unregister_netdev() to
avoid the problem.
Jia-Ju Bai provides several patches, first knocks some collecting dust
off an old e100 driver to add a check to avoid a null pointer
dereference. Then cleans up a possible resource leak by releasing the
skb buffer allocated when the e100_xmit_prepare() runs into an issue
in the DMA mapping. In igb, add a missing rtnl_unlock() for when we
error out due to igb_sriov_reinit() in the igb_init_interrupt_scheme().
Provides a e1000e fix, based on suggestions from Alex Duyck to move
head/tail register writing to e1000_configure_tx/rx() to avoid a
possible null pointer dereference (similar to igb driver). Lastly,
fix a possible memory leak in igb_probe(), where the memory shadow_vfta
allocated by kcalloc in igb_sw_init() is not freed.
Mark simplifies port-specific macros for ixgbe by eliminating explicit
comparisons with 0 and enclose formal parameters in parens to eliminate
the risk of an operator precedence issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 Aug 2015 03:16:53 +0000 (20:16 -0700)]
Merge branch 'vrf-next'
Nikolay Aleksandrov says:
====================
vrf: a few simplifications and cleanups
These patches remove some unnecessary checks (patches 3, 4), unnecessary
num_slaves member and refcnt manipulations which are already done by the
upper functions.
====================
Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
vrf: don't check for dstats and rth in uninit path
dstats and rth are always present because we fail the device registration
if they can't be allocated in vrf_init() (ndo_init) so drop the unnecessary
checks.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Tue, 18 Aug 2015 16:42:09 +0000 (18:42 +0200)]
lwtunnel: ip tunnel: fix multiple routes with different encap
Currently, two routes going through the same tunnel interface are considered
the same even when they are routed to a different host after encapsulation.
This causes all routes added after the first one to have incorrect
encapsulation parameters.
This is nicely visible by doing:
# ip r a 192.168.1.2/32 dev vxlan0 tunnel dst 10.0.0.2
# ip r a 192.168.1.3/32 dev vxlan0 tunnel dst 10.0.0.3
# ip r
[...]
192.168.1.2/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...]
192.168.1.3/32 tunnel id 0 src 0.0.0.0 dst 10.0.0.2 [...]
Implement the missing comparison function.
Fixes: 3093fbe7ff4bc ("route: Per route IP tunnel metadata via lightweight tunnel") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Tue, 18 Aug 2015 16:41:13 +0000 (18:41 +0200)]
lwtunnel: fix memory leak
The built lwtunnel_state struct has to be freed after comparison.
Fixes: 571e722676fe3 ("ipv4: support for fib route lwtunnel encap attributes") Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Tue, 18 Aug 2015 11:37:01 +0000 (13:37 +0200)]
batman-adv: Fix memory leak on tt add with invalid vlan
The object tt_local is allocated with kmalloc and not initialized when the
function batadv_tt_local_add checks for the vlan. But this function can
only cleanup the object when the (not yet initialized) reference counter of
the object is 1. This is unlikely and thus the object would leak when the
vlan could not be found.
Instead the uninitialized object tt_local has to be freed manually and the
pointer has to set to NULL to avoid calling the function which would try to
decrement the reference counter of the not existing object.
CID: 1316518 Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 18 Aug 2015 09:31:44 +0000 (12:31 +0300)]
cxgb4: memory corruption in debugfs
You can't use kstrtoul() with an int or it causes memory corruption.
Also j should be unsigned or we have underflow bugs.
I considered changing "j" to unsigned long but everything fits in a u32.
Fixes: 8e3d04fd7d70 ('cxgb4: Add MPS tracing support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/built-in.o: In function `.vnic_wq_devcmd2_alloc':
(.text+0x49fe40): multiple definition of `.vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.text+0xb4318): first defined here
drivers/net/built-in.o:(.opd+0x2af00): multiple definition of `vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.opd+0xad70): first defined here
drivers/net/built-in.o: In function `.vnic_wq_init_start':
(.text+0x49f9c0): multiple definition of `.vnic_wq_init_start'
drivers/scsi/built-in.o:(.text+0xb3b58): first defined here
drivers/net/built-in.o:(.opd+0x2ae88): multiple definition of `vnic_wq_init_start'
drivers/scsi/built-in.o:(.opd+0xace0): first defined here
Rename these to 'enic_*' to avoid the conflict with the functiosn of
the same name in the snic scsi driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Rajesh Borundia [Tue, 18 Aug 2015 07:22:59 +0000 (10:22 +0300)]
bnx2x: Add vxlan RSS support
Latest FW submission added some vxlan offload capabilities to our device.
This patch adds the ability to connect to the vxlan NDOs and configure
the UDP port associated with it in the HW.
The device would now be capable of performing RSS according to the
inner headers of the vxlan packets.
Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 18 Aug 2015 21:17:22 +0000 (14:17 -0700)]
Merge branch 'dsa-multi-swtich'
Andrew Lunn says:
====================
D in DSA patches
The D in DSA is distributed, meaning multiple switches can be
connected together. Currently no mainline system does this, and so the
code is broken. This patchset contains two fixes, and a small helper.
With three of more switches, the current device tree binding is not
sufficient to express the routing between the switches. The first
patch extends the binding, in a backwards compatible way, to allow a
link between a switch to describe all the switches accessible over the
link, not just the direct neighbor.
The third patch fixes the port configuration on newer devices for
links connecting switches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-artful-kernel.git / log