Andreas Färber [Mon, 30 Apr 2012 16:00:55 +0000 (18:00 +0200)]
configure: Add libraries for qemu-ga on Solaris
Move socket-related Solaris libraries to $solarisnetlibs and use them
for both $LIBS and $libs_qga.
Fixes build on illumos without --disable-guest-agent.
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Mon, 30 Apr 2012 16:00:54 +0000 (18:00 +0200)]
qemu-ga: Implement alternative to O_ASYNC
ga_channel_open() was using open flag O_ASYNC for SIGIO-driven I/O.
This breaks on illumos, so fall back to POSIX I_SETSIG ioctl (SIGPOLL).
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Sat, 28 Apr 2012 19:16:21 +0000 (21:16 +0200)]
vga: Don't switch to 1 x 1 character text screen
Initially, vga_get_text_resolution returns a text resolution of 1 x 1
(vga register values are 0).
This is visible during MIPS Malta boot with SDL. It also occurs with the
i386 or x86_64 system emulation when it runs in single step mode:
QEMU changes the size of the SDL window to the smallest possible value
which is supported by the window manager. As this is not the calculated
size, QEMU switches to scaled mode. When the BIOS or the VGA driver sets
the normal text resolution, the window stays small and displays
microscopic characters.
Ignoring text resolutions of 1 x 1 or less avoids these problems.
A similar workaround already exists for too large resolutions.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Tue, 1 May 2012 09:29:44 +0000 (09:29 +0000)]
Merge branch 'maintainers-up' of git://repo.or.cz/qemu/afaerber
* 'maintainers-up' of git://repo.or.cz/qemu/afaerber:
MAINTAINERS: Document all stable trees
MAINTAINERS: Fix SCM tree for virtio-9p
MAINTAINERS: Indicate type of SCM
MAINTAINERS: Fix TCI file pattern
MAINTAINERS: Fix virtio-9p file pattern
MAINTAINERS: Fix PC file pattern
Blue Swirl [Tue, 1 May 2012 09:29:23 +0000 (09:29 +0000)]
Merge branch 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Drop darwin-user
configure: add '--disable-cocoa' switch
raw-posix: Do not use CONFIG_COCOA macro
Blue Swirl [Tue, 1 May 2012 09:28:59 +0000 (09:28 +0000)]
Merge branch 'prep-up' of git://repo.or.cz/qemu/afaerber
* 'prep-up' of git://repo.or.cz/qemu/afaerber:
prep: Move int-ack register from PReP to Raven PCI emulation
prep: Initialize PC speaker
isa: Add isa_bus_from_device() method
fdc: Parametrize ISA base, IRQ and DMA
i82378/i82374: Do not create DMA controller twice
Blue Swirl [Tue, 1 May 2012 09:27:53 +0000 (09:27 +0000)]
Merge branch 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpu
* 'qom-cpu-rest.v1' of git://github.com/afaerber/qemu-cpu:
Makefile: Simplify compilation of target-*/cpu.c
target-mips: Start QOM'ifying CPU init
target-mips: QOM'ify CPU
target-m68k: Add QOM CPU subclasses
target-m68k: Start QOM'ifying CPU init
target-m68k: QOM'ify CPU reset
target-m68k: QOM'ify CPU
target-sh4: Start QOM'ifying CPU init
target-sh4: QOM'ify CPU reset
target-sh4: QOM'ify CPU
MAINTAINERS: Downgrade target-mips and target-sh4 to Odd Fixes
MAINTAINERS: Downgrade target-m68k to Odd Fixes
Andreas Färber [Mon, 16 Apr 2012 04:31:11 +0000 (04:31 +0000)]
Drop darwin-user
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Pavel Borzenkov [Thu, 10 Nov 2011 18:40:07 +0000 (22:40 +0400)]
configure: add '--disable-cocoa' switch
When SDL support is disabled, there is no way to build QEMU without
Cocoa support on MacOS X. This patch adds '--disable-cocoa' switch and
allows to build QEMU without both SDL and Cocoa frontends.
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
[AF: Adapt help output] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Pavel Borzenkov [Thu, 10 Nov 2011 18:40:06 +0000 (22:40 +0400)]
raw-posix: Do not use CONFIG_COCOA macro
Use __APPLE__ and __MACH__ macros instead of CONFIG_COCOA to detect Mac
OS X host. The patch is based on Ben Leslie's patch:
http://patchwork.ozlabs.org/patch/97859/
Signed-off-by: Ben Leslie <benno@benno.id.au> Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Andreas Färber [Thu, 26 Apr 2012 09:57:39 +0000 (11:57 +0200)]
configure: Don't build bsd-user on Mac OS X by default
Fixes the build when combined with the drop of darwin-user.
Enthusiasts can still try building it using --enable-bsd-user.
Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Bernhard Walle <bernhard@bwalle.de> Tested-by: Bernhard Walle <bernhard@bwalle.de> [Mac OS 10.7.3] Acked-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: malc <av1474@comtv.ru> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Tested-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixes the build of the Cocoa frontend on Mac OS X and avoids a
workaround for AIX.
For pre-10 Solaris include osdep.h.
Reported-by: Pavel Borzenkov <pavel.borzenkov@gmail.com> Reported-by: Rui Carmo <rui.carmo@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Juan Pineda <juan@logician.com> Cc: malc <av1474@comtv.ru> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Tested-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Wed, 25 Apr 2012 22:15:54 +0000 (00:15 +0200)]
target-mips: Move definition of uint_fast{8, 16}_t to osdep.h
osdep.h is included via qemu-common.h.
Prepares for use of [u]int_fast*_t types in softfloat code.
Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Cc: Aurélien Jarno <aurelien@aurel32.net> Cc: Peter Maydell <peter.maydell@linaro.org> Tested-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Wed, 25 Apr 2012 22:15:53 +0000 (00:15 +0200)]
softfloat: Fix mixups of int and int16
normalizeFloat{32,64}Subnormal() expect the exponent as int16, not int.
This went unnoticed since int16 and uint16 were both typedef'ed to int.
Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 28 Apr 2012 08:57:56 +0000 (08:57 +0000)]
Merge branch 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Make SETEND respect bswap_code (BE8) setting
target-arm: Move A9 config_base_address reset value to ARMCPU
target-arm: Change cpu_arm_init() return type to ARMCPU
Blue Swirl [Sat, 28 Apr 2012 08:19:50 +0000 (08:19 +0000)]
Merge branch 'timer' of git://qemu.weilnetz.de/qemu
* 'timer' of git://qemu.weilnetz.de/qemu:
qemu-timer: Optimize data structures
qemu-timer: Remove function alarm_has_dynticks
qemu-timer: Use bool, false, true for boolean values
qemu-timer: Remove unused function qemu_alarm_pending
qemu-timer: Remove redundant include statements
Anthony Liguori [Fri, 27 Apr 2012 17:00:06 +0000 (12:00 -0500)]
Merge remote-tracking branch 'qmp/queue/qmp' into staging
* qmp/queue/qmp:
qapi: fix qmp_balloon() conversion
qemu-iotests: add block-stream speed value test case
block: add 'speed' optional parameter to block-stream
block: change block-job-set-speed argument from 'value' to 'speed'
block: use Error mechanism instead of -errno for block_job_set_speed()
block: use Error mechanism instead of -errno for block_job_create()
Stefan Hajnoczi [Wed, 25 Apr 2012 15:51:04 +0000 (16:51 +0100)]
qemu-iotests: add block-stream speed value test case
Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed. The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later. If the parameter has an invalid
value we expect to get an error and the job is not created.
It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Hajnoczi [Wed, 25 Apr 2012 15:51:03 +0000 (16:51 +0100)]
block: add 'speed' optional parameter to block-stream
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Hajnoczi [Wed, 25 Apr 2012 15:51:02 +0000 (16:51 +0100)]
block: change block-job-set-speed argument from 'value' to 'speed'
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Hajnoczi [Wed, 25 Apr 2012 15:51:01 +0000 (16:51 +0100)]
block: use Error mechanism instead of -errno for block_job_set_speed()
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Hajnoczi [Wed, 25 Apr 2012 15:51:00 +0000 (16:51 +0100)]
block: use Error mechanism instead of -errno for block_job_create()
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions. This is ugly because the Error
should be created at the point where we still have all the relevant
information. More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.
Go ahead and use Error directly and don't convert later.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Peter Maydell [Tue, 24 Apr 2012 18:05:05 +0000 (18:05 +0000)]
target-arm: Make SETEND respect bswap_code (BE8) setting
Make the SETEND instruction respect the setting of bswap_code,
so that in BE8 mode we UNDEF for attempts to switch into
little-endian mode and nop for attempts to stay in big-endian
mode. (This is the inverse of the existing handling of SETEND
in the more common little-endian setup, which we use since
we don't implement the architecturally-mandated dynamic
endianness switching.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 20 Apr 2012 07:39:15 +0000 (07:39 +0000)]
target-arm: Move A9 config_base_address reset value to ARMCPU
Move the A9 config_base_address cp15 register reset value to
ARMCPU. This should become a QOM property so that the Highbank
board can set it without having to pull in cpu-qom.h, but at
least this avoids the implicit dependency on reset ordering
that the previous workaround had.
Cc: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Fri, 20 Apr 2012 07:39:14 +0000 (07:39 +0000)]
target-arm: Change cpu_arm_init() return type to ARMCPU
Make cpu_arm_init() return a QOM ARMCPU, so that we don't need to
obtain an ARMCPU through arm_env_get_cpu() in machine init code.
This requires to adjust the inclusion site of cpu-qom.h and in turn,
forward-looking, to homogenize its include order.
cpu_init() must still return a CPUARMState for backwards and
cross-target compatibility, so adjust the cpu_init macro.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Weil [Fri, 20 Apr 2012 09:27:24 +0000 (11:27 +0200)]
qemu-timer: Remove function alarm_has_dynticks
Some time ago, the last time which did not have dynticks was removed,
so now all timers have dynticks.
I also removed a misleading error message for the dynticks timer.
If timer_create fails, there is already an error message, and
QEMU will use the unix timer which also provides dynamic ticks,
therefore dynamic ticks are not disabled.
v2:
Remove two if statements because they were always true
(thanks to Paolo Bonzini for this correction).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de>
Anthony Liguori [Thu, 26 Apr 2012 20:21:52 +0000 (15:21 -0500)]
Merge remote-tracking branch 'kraxel/usb.49' into staging
* kraxel/usb.49:
usb-uhci: update irq line on reset
usb: add serial number generator
usb-redir: Not finding an async urb id is not an error
usb-redir: Reset device address and speed on disconnect
usb-redir: An interface count of 0 is a valid value
usb-xhci: fix bit test
usb-xhci: Use PCI DMA helper functions
usb-host: fix zero-length packets
usb-host: don't dereference invalid iovecs
usb-storage: fix request canceling
usb-ehci: Ensure frindex writes leave a valid frindex value
usb-ehci: add missing usb_packet_init() call
usb-ehci: remove hack
Anthony Liguori [Thu, 26 Apr 2012 20:20:33 +0000 (15:20 -0500)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
* mst/tags/for_anthony:
e1000: set E1000_ICR_INT_ASSERTED only for 8257x
e1000: link auto-negotiation emulation
e1000: introduce bit for debugging PHY emulation
e1000: introduce helpers to manipulate link status
e1000: PHY loopback mode support
e1000: conditionally raise irq at the end of MDI cycle
e1000: introduce bits of PHY control register
eepro100: Fix multicast regression
virtio: order index/descriptor reads
virtio: add missing mb() on enable notification
virtio: add missing mb() on notification
e1000: move reset function earlier in file
Anthony Liguori [Thu, 26 Apr 2012 20:18:06 +0000 (15:18 -0500)]
Merge remote-tracking branch 'afaerber/qom-cpu-x86-prop.v3' into staging
* afaerber/qom-cpu-x86-prop.v3:
target-i386: Introduce "tsc-frequency" property for X86CPU
target-i386: Prepare "vendor" property for X86CPU
target-i386: Introduce "xlevel" property for X86CPU
target-i386: Introduce "level" property for X86CPU
target-i386: Add property getter for CPU model-id
target-i386: Add property getter for CPU stepping
target-i386: Add property getter for CPU model
target-i386: Add property getter for CPU family
target-i386: Add "model-id" property to X86CPU
target-i386: Add "stepping" property to X86CPU
target-i386: Add "model" property to X86CPU
target-i386: Add "family" property to X86CPU
target-i386: Add range check for -cpu ,family=x
target-i386: Pass X86CPU to cpu_x86_register()
target-i386: Fix x86_cpuid_set_model_id()
timers: the rearm function should be able to handle delta = INT64_MAX
Fix win32_rearm_timer and mm_rearm_timer: they should be able to handle
INT64_MAX as a delta parameter without overflowing.
Also, the next deadline in ms should be calculated rounding down rather
than up (see unix_rearm_timer and dynticks_rearm_timer).
Finally ChangeTimerQueueTimer takes an unsigned long and timeSetEvent
takes an unsigned int as delta, so cast the ms delta to the appropriate
unsigned integer.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 13 Apr 2012 20:24:42 +0000 (22:24 +0200)]
sdl: Add QEMU mascot icon for use with SDL
This is a bitmap file (32x32x4) derived from the official QEMU mascot
(which was designed by Benoît Canet). I stripped the text from the SVG
to get a nearly square image and converted the result to BMP without
any manual optimization.
The bitmap is currently used by QEMU's SDL interface and replaces the
default X icon.
v2: Add qemu-icon.bmp to Makefile.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 18 Apr 2012 22:33:15 +0000 (17:33 -0500)]
pc-sysfw: make sure to call qdev_init
We're not actually calling qdev_init for the pc-sysfw device. Since we create
the canonical path during realize, this was causing an assert to trigger when
attempting to read a link pointing to pc-sysfw.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a function which creates unique serial numbers for usb
devices and puts it into use. Windows guests tend to become unhappy if
they find two identical usb devices in the system. Effects range from
non-functional devices (with yellow exclamation mark in device manager)
to BSODs. Handing out unique serial numbers to devices fixes this.
With this patch applied almost all emulated devices get a generated,
unique serial number. There are two exceptions:
* usb-storage devices will prefer a user-specified serial number
and will only get a generated number in case the serial property
is unset.
* usb-hid devices keep the fixed serial number "42" as it is used
to signal "remote wakeup actually works".
See commit 7b074a22dab4bdda9864b933f1bc811a3db42845
Hans de Goede [Sat, 31 Mar 2012 15:14:23 +0000 (17:14 +0200)]
usb-redir: Not finding an async urb id is not an error
We clear our pending async urb list on device disconnect and we may still
receive "packet complete" packets from our peer after this, which will then
refer to packet ids no longer in our list.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Sat, 31 Mar 2012 15:14:21 +0000 (17:14 +0200)]
usb-redir: An interface count of 0 is a valid value
An interface-count of 0 happens when a device is in unconfigured state when
it gets redirected. So we should not use 0 to detect not having received
interface info from our peer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
David Gibson [Wed, 4 Apr 2012 00:15:58 +0000 (10:15 +1000)]
usb-xhci: Use PCI DMA helper functions
Shortly before 1.0, we added helper functions / wrappers for doing PCI DMA
from individual devices. This makes what's going on clearer and means that
when we add IOMMU support somewhere in the future, only the general PCI
code will have to change, not every device that uses PCI DMA.
However, usb-xhci is not using these wrappers, despite being a PCI only
device. This patch remedies the situation, using the pci dma functions
instead of direct calls to cpu_physical_memory_{read,write}(). Likewise
address parameters for DMA are changed to dma_addr_t instead of
target_phys_addr_t.
[ kraxel: removed #ifdefs ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb-host optimizes away zero-length packets by not entering the
processing loop at all. Which isn't correct, we should submit a
zero-length urb to the host devicein that case. This patch makes
sure we run the processing loop at least once.
Little fix for usb packet handling on i/o cancelation. The
usb packet pointer (s->packet) is cleared at the wrong place:
The scsi request cancel handler does it. When a usb packet
is canceled the usb-storage emulation canceles the scsi request
if present. In most cases there is one, so usually s->packet
is cleared as needed even with the code sitting at the wrong
place.
If there is no scsi request in flight s->packet is not cleared
though. The usb-storage emulation will then try to complete an
usb packet which is not in flight any more and thereby trigger
an assert() in the usb core.
Fix this by clearing s->packet at the correct place, which is
the usb packet cancel header.
Hans de Goede [Tue, 3 Apr 2012 12:21:47 +0000 (14:21 +0200)]
usb-ehci: Ensure frindex writes leave a valid frindex value
frindex is a 14 bits counter, so bits 31-14 should always be 0, and
after the commit titled "usb-ehci: frindex always is a 14 bits counter"
we rely on frindex always being a multiple of 8. I've not seen this in
practice, but theoretically a guest can write a value >= 0x4000 or a value
which is not a multiple of 8 value to frindex, this patch ensures that
things will still work when that happens.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To answer the question in the comment removed by this patch: I think
this was needed because several places in the ehci emulation did not
check the T bit of link entries correctly and thus might have followed
invalid references. See commit 2a5ff735dc1074171a0cbb1dc228d6d6e907f571
It's identical to the hda-duplex codec, except that it advertises the
input as microphone instead of line-in and the output as speaker instead
of line-out. Some guest apps (microsoft netmeeting being one) are picky
when it comes to selecting the recording source and don't accept
line-in, so give them what they expect.
Andreas Färber [Fri, 13 Apr 2012 15:52:27 +0000 (17:52 +0200)]
MAINTAINERS: Document all stable trees
We currently host stable trees for 0.10, 0.14, 0.15 and 1.0.
Sort in descending order. It is expected that further non-stable
sections will be added above these so this order avoids scrolling
through an ever-growing list of stable trees.
Andreas Färber [Fri, 13 Apr 2012 16:23:55 +0000 (18:23 +0200)]
MAINTAINERS: Fix SCM tree for virtio-9p
Instead of a Web link, T: is supposed to indicate type of SCM and
pullable URL, so switch to the git:// URL.
Also harmonize the spacing between sections while at it.
Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
projects / qemu.git / log