Peter Maydell [Fri, 25 Oct 2019 20:57:41 +0000 (21:57 +0100)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
# gpg: Signature made Fri 25 Oct 2019 20:18:23 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
yield_until_fd_readable: make it work with any AioContect
virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 25 Oct 2019 17:32:26 +0000 (18:32 +0100)]
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-24-2019-v2' into staging
MIPS queue for October 24th, 2019 - v2
# gpg: Signature made Fri 25 Oct 2019 17:37:29 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-24-2019-v2:
tests/ssh_linux_malta: Fix 64-bit target tests
tests/ssh_linux_malta: Refactor how to get image/kernel info
tests/ssh_linux_malta: Match stricter console output
tests/ssh_linux_malta: Remove duplicated test
tests/ssh_linux_malta: Run tests using a snapshot image
target/mips: Refactor handling of vector compare 'less than' (signed) instructions
target/mips: Refactor handling of vector compare 'equal' instructions
target/mips: Demacro LMI decoder
target/mips: msa: Split helpers for ASUB_<S|U>.<B|H|W|D>
target/mips: msa: Split helpers for HSUB_<S|U>.<H|W|D>
target/mips: msa: Split helpers for PCK<EV|OD>.<B|H|W|D>
target/mips: msa: Split helpers for S<LL|RA|RAR|RL|RLR>.<B|H|W|D>
target/mips: msa: Split helpers for HADD_<S|U>.<H|W|D>
target/mips: msa: Split helpers for ADD<_A|S_A|S_S|S_U|V>.<B|H|W|D>
target/mips: msa: Split helpers for ILV<EV|OD|L|R>.<B|H|W|D>
target/mips: msa: Split helpers for <MAX|MIN>_<S|U>.<B|H|W|D>
target/mips: msa: Split helpers for <MAX|MIN>_A.<B|H|W|D>
MAINTAINERS: Update mail address of Aleksandar Rikalo
target/mips: Clean up op_helper.c
target/mips: Clean up helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 9090d3332cdcc added tests for specific to the 32-bit
machines, which inadvertently make the 64-bit tests failing.
Now than we have this information available in the CPU_INFO
array, use it to have the 64-bit tests back.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-12-f4bug@amsat.org>
tests/ssh_linux_malta: Refactor how to get image/kernel info
The qcow and kernel images use a similar pattern regarding they
are for big/little endianess, or 32/64 bit.
Refactor using more dictionary keys.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-11-f4bug@amsat.org>
tests/ssh_linux_malta: Match stricter console output
Match on stricter console output.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-10-f4bug@amsat.org>
Remove duplicated test (probably copy/paste error in
commit 9090d3332cdcc).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-9-f4bug@amsat.org>
tests/ssh_linux_malta: Run tests using a snapshot image
If a test fails, it can corrupt the underlying QCow2 image,
making further tests failing.
Fix this by running each test with a snapshot.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20191019153437.9820-8-f4bug@amsat.org>
Filip Bozuta [Wed, 23 Oct 2019 13:37:05 +0000 (15:37 +0200)]
target/mips: Refactor handling of vector compare 'less than' (signed) instructions
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571837825-24438-3-git-send-email-Filip.Bozuta@rt-rk.com>
Filip Bozuta [Wed, 23 Oct 2019 13:37:04 +0000 (15:37 +0200)]
target/mips: Refactor handling of vector compare 'equal' instructions
Remove unnecessary argument and provide separate function for each
instruction.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571837825-24438-2-git-send-email-Filip.Bozuta@rt-rk.com>
This makes searches for instances of opcode usages easier.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-15-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for ASUB_<S|U>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <1571826227-10583-13-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for HSUB_<S|U>.<H|W|D>
Achieves clearer code and slightly better performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <1571826227-10583-12-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for PCK<EV|OD>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-11-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for S<LL|RA|RAR|RL|RLR>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-10-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for HADD_<S|U>.<H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-9-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for ADD<_A|S_A|S_S|S_U|V>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-8-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for ILV<EV|OD|L|R>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-7-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for <MAX|MIN>_<S|U>.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-6-git-send-email-aleksandar.markovic@rt-rk.com>
target/mips: msa: Split helpers for <MAX|MIN>_A.<B|H|W|D>
Achieves clearer code and slightly better performance.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-5-git-send-email-aleksandar.markovic@rt-rk.com>
MAINTAINERS: Update mail address of Aleksandar Rikalo
Aleksandar Rikalo wishes to change his primary mail address for QEMU.
Some minor line order is corrected in .mailmap to be alphabetical,
too.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-4-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-3-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Cc: Markus Armbruster <armbru@redhat.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1571826227-10583-2-git-send-email-aleksandar.markovic@rt-rk.com>
Peter Maydell [Fri, 25 Oct 2019 13:59:53 +0000 (14:59 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Fix data corruption bug that is triggered in partial cluster
allocation with default options
- qapi: add support for blkreplay driver
- doc: Describe missing generic -blockdev options
- iotests: Fix 118 when run as root
- Minor code cleanups
# gpg: Signature made Fri 25 Oct 2019 14:19:04 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
coroutine: Add qemu_co_mutex_assert_locked()
doc: Describe missing generic -blockdev options
block/backup: drop dead code from backup_job_create
blockdev: Use error_report() in hmp_commit()
iotests: Skip read-only cases in 118 when run as root
qapi: add support for blkreplay driver
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Thu, 24 Oct 2019 14:26:58 +0000 (16:26 +0200)]
qcow2: Fix corruption bug in qcow2_detect_metadata_preallocation()
qcow2_detect_metadata_preallocation() calls qcow2_get_refcount() which
requires s->lock to be taken to protect its accesses to the refcount
table and refcount blocks. However, nothing in this code path actually
took the lock. This could cause the same cache entry to be used by two
requests at the same time, for different tables at different offsets,
resulting in image corruption.
As it would be preferable to base the detection on consistent data (even
though it's just heuristics), let's take the lock not only around the
qcow2_get_refcount() calls, but around the whole function.
This patch takes the lock in qcow2_co_block_status() earlier and asserts
in qcow2_detect_metadata_preallocation() that we hold the lock.
Fixes: 69f47505ee66afaa513305de0c1895a224e52c45 Cc: qemu-stable@nongnu.org Reported-by: Michael Weiser <michael.weiser@gmx.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Michael Weiser <michael.weiser@gmx.de> Reviewed-by: Michael Weiser <michael.weiser@gmx.de> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 24 Oct 2019 14:26:57 +0000 (16:26 +0200)]
coroutine: Add qemu_co_mutex_assert_locked()
Some functions require that the caller holds a certain CoMutex for them
to operate correctly. Add a function so that they can assert the lock is
really held.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Michael Weiser <michael.weiser@gmx.de> Reviewed-by: Michael Weiser <michael.weiser@gmx.de> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Max Reitz <mreitz@redhat.com>
* remotes/vivier2/tags/trivial-branch-pull-request:
hw/rtc/aspeed_rtc: Remove unused includes
hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include
hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less
hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory
hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory
hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory
hw/timer: Compile devices not target-dependent as common object
qemu-timer: reuse MIN macro in qemu_timeout_ns_to_ms
event_notifier: avoid dandling file descriptor in event_notifier_cleanup
util/async: avoid useless cast
pci_bridge: fix a typo in comment
qemu-options.hx: Update for reboot-timeout parameter
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/timer/trace-events
Kevin Wolf [Tue, 15 Oct 2019 10:29:58 +0000 (12:29 +0200)]
doc: Describe missing generic -blockdev options
We added more generic options after introducing -blockdev and forgot to
update the documentation (man page and --help output) accordingly. Do
that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
block/backup: drop dead code from backup_job_create
After commit 00e30f05de1d195, there is no more "goto error" points
after job creation, so after "error:" @job is always NULL and we don't
need roll-back job creation.
Reported-by: Coverity (CID 1406402) Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 18 Oct 2019 11:46:42 +0000 (13:46 +0200)]
iotests: Skip read-only cases in 118 when run as root
Some tests in 118 use chmod to remove write permissions from the file
and assume that the image can indeed not be opened read-write
afterwards. This doesn't work when the test is run as root, because root
can still open the file as writable even when the permission bit isn't
set.
Introduce a @skip_if_root decorator and use it in 118 to skip the tests
in question when the script is run as root.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Pavel Dovgalyuk [Wed, 16 Oct 2019 08:40:39 +0000 (11:40 +0300)]
qapi: add support for blkreplay driver
This patch adds support for blkreplay driver to the blockdev options.
Now blkreplay can be used with -blockdev command line option
in the following format:
-blockdev driver=blkreplay,image=file-node-name,node-name=replay-node-name
This option makes possible implementation of the better command
line support for record/replay invocations.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Julia Suvorova [Fri, 18 Oct 2019 14:28:56 +0000 (16:28 +0200)]
virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()
QEMU does not wait for completed I/O requests, assuming that the guest
driver will reset the device before calling unrealize(). This does not
happen on Windows, and QEMU crashes in virtio_notify(), getting the
result of a completed I/O request on hot-unplugged device.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20191018142856.31870-1-jusual@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Fri, 25 Oct 2019 12:12:16 +0000 (13:12 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191025' into staging
target-arm queue:
* raspi boards: some cleanup
* raspi: implement the bcm2835 system timer device
* raspi: implement a dummy thermal sensor
* misc devices: switch to ptimer transaction API
* cache TB flag state to improve performance of cpu_get_tb_cpu_state
* aspeed: Add an AST2600 eval board
* remotes/pmaydell/tags/pull-target-arm-20191025: (42 commits)
hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
hw/arm/bcm2836: Rename cpus[] as cpu[].core
hw/arm/bcm2836: Make the SoC code modular
hw/arm/bcm2835_peripherals: Use the SYS_timer
hw/timer/bcm2835: Add the BCM2835 SYS_timer
hw/arm/bcm2835_peripherals: Use the thermal sensor block
hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
hw/timer/slavio_timer: Remove useless check for NULL t->timer
hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API
hw/timer/xilinx_timer.c: Switch to transaction-based ptimer API
hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer API
target/arm: Rely on hflags correct in cpu_get_tb_cpu_state
linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIAN
linux-user/aarch64: Rebuild hflags for TARGET_WORDS_BIGENDIAN
target/arm: Rebuild hflags for M-profile NVIC
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/highbank: Use AddressSpace when using write_secondary_boot()
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we are going to add more core-specific fields, add a 'cpu'
structure and move the ARMCPU field there as 'core'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This file creates the BCM2836/BCM2837 blocks.
The biggest differences with the BCM2838 we are going to add, are
the base addresses of the interrupt controller and the peripherals.
Add these addresses in the BCM283XInfo structure to make this
block more modular. Remove the MCORE_OFFSET offset as it is
not useful and rather confusing.
Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the recently added SYS_timer.
Now U-Boot does not hang anymore polling a free running counter
stuck at 0.
This timer is also used by the Linux kernel thermal subsystem.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the 64-bit free running timer. Do not model the COMPARE register
(no IRQ generated).
This timer is used by Linux kernel and recently U-Boot:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7
https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-4-f4bug@amsat.org
[PMM: squashed in switch to using memset in reset] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/bcm2835_peripherals: Use the thermal sensor block
Map the thermal sensor in the BCM2835 block.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20191019234715.25750-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensor
We will soon implement the SYS_timer. This timer is used by Linux
in the thermal subsystem, so once available, the subsystem will be
enabled and poll the temperature sensors. We need to provide the
minimum required to keep Linux booting.
Add a dummy thermal sensor returning ~25°C based on:
https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 21 Oct 2019 14:10:40 +0000 (15:10 +0100)]
hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer API
Switch the milkymist-sysctl code away from bottom-half based
ptimers to the new transaction-based ptimer API. This just requires
adding begin/commit calls around the various places that modify the
ptimer state, and using the new ptimer_init() function to create the
timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021141040.11007-1-peter.maydell@linaro.org
Peter Maydell [Mon, 21 Oct 2019 14:06:00 +0000 (15:06 +0100)]
hw/m68k/mcf5206.c: Switch to transaction-based ptimer API
Switch the mcf5206 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191021140600.10725-1-peter.maydell@linaro.org
Peter Maydell [Mon, 21 Oct 2019 13:43:56 +0000 (14:43 +0100)]
hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer API
Switch the grlib_gptimer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191021134357.14266-3-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 21 Oct 2019 13:43:57 +0000 (14:43 +0100)]
hw/timer/slavio_timer.c: Switch to transaction-based ptimer API
Switch the slavio_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191021134357.14266-4-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less
Only 2 source files require the "mc146818rtc_regs.h" header.
Instead of having it processed 12 times, by all objects
using "mc146818rtc.h", include it directly where used.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-13-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
hw/timer: Compile devices not target-dependent as common object
All these devices do not contain any target-specific. While most
of them are arch-specific, they are shared between different
targets of the same arch family (ARM and AArch64, MIPS32/MIPS64,
endianess, ...).
Put them into common-obj-y to compile them once for all targets.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191003230404.19384-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Frediano Ziglio [Wed, 23 Oct 2019 12:26:51 +0000 (13:26 +0100)]
event_notifier: avoid dandling file descriptor in event_notifier_cleanup
If rfd is equal to wfd the file descriptor is closed but
rfd will still have the closed value.
The EventNotifier structure should not be used again after calling
event_notifier_cleanup or should be initialized again but make
sure to not have dandling file descriptors around.
Han Han [Tue, 15 Oct 2019 15:14:51 +0000 (23:14 +0800)]
qemu-options.hx: Update for reboot-timeout parameter
Since ee5d0f89d, -1 is not valid for the value of reboot-timeout. Update
that in qemu-options doc.
Signed-off-by: Han Han <hhan@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191015151451.727323-1-hhan@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell [Mon, 21 Oct 2019 13:43:55 +0000 (14:43 +0100)]
hw/timer/slavio_timer: Remove useless check for NULL t->timer
In the slavio timer device, the ptimer TimerContext::timer is
always created by slavio_timer_init(), so there's no need to
check it for NULL; remove the single unneeded NULL check.
This will be useful to avoid compiler/Coverity errors when
a subsequent change adds a use of t->timer before the location
we currently do the NULL check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191021134357.14266-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Oct 2019 13:21:22 +0000 (14:21 +0100)]
hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API
Switch the xilinx_axidma code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191017132122.4402-4-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Oct 2019 13:21:21 +0000 (14:21 +0100)]
hw/timer/xilinx_timer.c: Switch to transaction-based ptimer API
Switch the xilinx_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191017132122.4402-3-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Oct 2019 13:21:20 +0000 (14:21 +0100)]
hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer API
Switch the fsl_etsec code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191017132122.4402-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before, helper_lookup_tb_ptr is the second hottest function in the
application, consuming almost a quarter of the runtime. Within the
entire execution, cpu_get_tb_cpu_state consumes about 12%.
After, helper_lookup_tb_ptr has dropped to the fourth hottest function,
with consumption dropping to a sixth of the runtime. Within the
entire execution, cpu_get_tb_cpu_state has dropped below 1%, and the
supporting function to rebuild hflags also consumes about 1%.
Assertions are retained for --enable-debug-tcg.
Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/arm: Rebuild hflags for TARGET_WORDS_BIGENDIAN
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-24-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
linux-user/aarch64: Rebuild hflags for TARGET_WORDS_BIGENDIAN
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-23-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This functions are given the mode and el state of the cpu
and writes the computed value to env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Hoist store to cs_base in cpu_get_tb_cpu_state
By performing this store early, we avoid having to save and restore
the register holding the address around any function calls.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function assumes nothing about the current state of the cpu,
and writes the computed value to env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are 3 conditions that each enable this flag. M-profile always
enables; A-profile with EL1 as AA64 always enables. Both of these
conditions can easily be cached. The final condition relies on the
FPEXC register which we are not prepared to cache.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Simplify set of PSTATE_SS in cpu_get_tb_cpu_state
Hoist the variable load for PSTATE into the existing test vs is_a64.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Hoist XSCALE_CPAR, VECLEN, VECSTRIDE in cpu_get_tb_cpu_state
We do not need to compute any of these values for M-profile.
Further, XSCALE_CPAR overlaps VECSTRIDE so obviously the two
sets must be mutually exclusive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_ANY bits
that will be cached, and are used by A-profile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently a trivial wrapper for rebuild_hflags_common_32.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Reduce tests vs M-profile in cpu_get_tb_cpu_state
Hoist the computation of some TBFLAG_A32 bits that only apply to
M-profile under a single test for ARM_FEATURE_M.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A32 bits
that will be cached, and are used by M-profile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set TBFLAG_ANY.BE_DATA in rebuild_hflags_common_32 and
rebuild_hflags_a64 instead of rebuild_hflags_common, where we do
not need to re-test is_a64() nor re-compute the various inputs.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A32 bits
that will be cached, and are used by all profiles.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_A64 bits
that will be cached. For now, the env->hflags variable is not
used, and the results are fed back to cpu_get_tb_cpu_state.
Note that not all BTI related flags are cached, so we have to
test the BTI feature twice -- once for those bits moved out to
rebuild_hflags_a64 and once for those bits that remain in
cpu_get_tb_cpu_state.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create a function to compute the values of the TBFLAG_ANY bits
that will be cached. For now, the env->hflags variable is not
used, and the results are fed back to cpu_get_tb_cpu_state.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Wed, 23 Oct 2019 13:04:55 +0000 (15:04 +0200)]
aspeed: Add an AST2600 eval board
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20191023130455.1347-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cédric Le Goater [Wed, 23 Oct 2019 13:04:54 +0000 (15:04 +0200)]
hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V model
The property names of AST2600 GPIO 1.8V model are one character bigger
than the names of the other ASPEED GPIO model. Increase the string
buffer size by one and be more strict on the expected pattern of the
property name.
This fixes the QOM test of the ast2600-evb machine under :
Apple LLVM version 10.0.0 (clang-1000.10.44.4)
Target: x86_64-apple-darwin17.7.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
Cc: Rashmica Gupta <rashmica.g@gmail.com> Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20191023130455.1347-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 24 Oct 2019 15:22:58 +0000 (16:22 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191024' into staging
ppc patch queue 2019-10-24
Last pull request before soft freeze.
* Lots of fixes and cleanups for spapr interrupt controllers
* More SLOF updates to fix problems with full FDT rendering at CAS
time (alas, more yet are to come)
* A few other assorted changes
This isn't quite as well tested as I usually try to do before a pull
request. But I've been sick and running into some other difficulties,
and wanted to get this sent out before heading towards KVM forum.
* remotes/dgibson/tags/ppc-for-4.2-20191024: (28 commits)
spapr/xive: Set the OS CAM line at reset
ppc/pnv: Fix naming of routines realizing the CPUs
ppc: Reset the interrupt presenter from the CPU reset handler
ppc/pnv: Add a PnvChip pointer to PnvCore
ppc/pnv: Introduce a PnvCore reset handler
spapr_cpu_core: Implement DeviceClass::reset
spapr: move CPU reset after presenter creation
spapr: Don't request to unplug the same core twice
pseries: Update SLOF firmware image
spapr: Move SpaprIrq::nr_xirqs to SpaprMachineClass
spapr: Remove SpaprIrq::nr_msis
spapr, xics, xive: Move SpaprIrq::post_load hook to backends
spapr, xics, xive: Move SpaprIrq::reset hook logic into activate/deactivate
spapr: Remove SpaprIrq::init_kvm hook
spapr, xics, xive: Match signatures for XICS and XIVE KVM connect routines
spapr, xics, xive: Move dt_populate from SpaprIrq to SpaprInterruptController
spapr, xics, xive: Move print_info from SpaprIrq to SpaprInterruptController
spapr, xics, xive: Move set_irq from SpaprIrq to SpaprInterruptController
spapr: Formalize notion of active interrupt controller
spapr, xics, xive: Move irq claim and free from SpaprIrq to SpaprInterruptController
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
mc146818rtc: Include mc146818rtc_regs.h directly in mc146818rtc.c
Devices/boards wanting to use the MC146818 RTC don't need
the knowledge its internal registers. Move the "mc146818rtc_regs.h"
inclusion to mc146818rtc.c where it is required.
We can not move this file from include/hw/timer/ to hw/timer/ for
local inclusion because the ACPI FADT table use the RTC_CENTURY
register address.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018133547.10936-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The ISA default number for the RTC devices is not related to its
registers neither. Move this definition to "hw/timer/mc146818rtc.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191018133547.10936-3-philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
projects / mirror_qemu.git / log