Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Two genirq fixes, plus an irqchip driver error handling fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
bug"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add rewind_stack_do_exit() to the noreturn list
linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
Merge tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix a sparc64 sun4v_pci regression introduced in this merged window,
and a dma-debug stracktrace regression from the big refactor last
merge window"
* tag 'dma-mapping-5.1-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: only skip one stackframe entry
sparc64/pci_sun4v: fix ATU checks for large DMA masks
Merge tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix an AMD IOMMU issue where the driver didn't correctly setup the
exclusion range in the hardware registers, resulting in exclusion
ranges being one page too big.
This can cause data corruption of the address of that last page is
used by DMA operations"
* tag 'iommu-fix-v5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Set exclusion range correctly
Merge tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- alcor: Stabilize data write requests
- sdhci-omap: Fix command error path during tuning
* tag 'mmc-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
mmc: alcor: don't write data before command has completed
Merge tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Well, this one became unpleasantly larger than previous pull requests,
but it's a kind of usual pattern: now it contains a collection of ASoC
fixes, and nothing to worry too much.
The fixes for ASoC core (DAPM, DPCM, topology) are all small and just
covering corner cases. The rest changes are driver-specific, many of
which are for x86 platforms and new drivers like STM32, in addition to
the usual fixups for HD-audio"
* tag 'sound-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (66 commits)
ASoC: wcd9335: Fix missing regmap requirement
ALSA: hda: Fix racy display power access
ASoC: pcm: fix error handling when try_module_get() fails.
ASoC: stm32: sai: fix master clock management
ASoC: Intel: kbl: fix wrong number of channels
ALSA: hda - Add two more machines to the power_save_blacklist
ASoC: pcm: update module refcount if module_get_upon_open is set
ASoC: core: conditionally increase module refcount on component open
ASoC: stm32: fix sai driver name initialisation
ASoC: topology: Use the correct dobj to free enum control values and texts
ALSA: seq: Fix OOB-reads from strlcpy
ASoC: intel: skylake: add remove() callback for component driver
ASoC: cs35l35: Disable regulators on driver removal
ALSA: xen-front: Do not use stream buffer size before it is set
ASoC: rockchip: pdm: change dma burst to 8
ASoC: rockchip: pdm: fix regmap_ops hang issue
ASoC: simple-card: don't select DPCM via simple-audio-card
ASoC: audio-graph-card: don't select DPCM via audio-graph-card
ASoC: tlv320aic32x4: Change author's name
ALSA: hda/realtek - Add quirk for Tuxedo XC 1509
...
Merge tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an ACPICA issue introduced during the 4.20 development cycle and
causing some systems to crash because of leftover operation region
data still maintained after the operation region in question has gone
away (Erik Schmauss)"
* tag 'acpi-5.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Namespace: remove address node from global list after method termination
Merge tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes across the driver spectrum this week, the mediatek fbdev support
might be a bit late for this round, but I looked over it and it's not
very large and seems like a useful feature for them.
Otherwise the main thing is a regression fix for i915 5.0 bug that
caused black screens on a bunch of Dell XPS 15s I think, I know at
least Fedora is waiting for this to land, and the udl fix is also for
a regression since 5.0 where unplugging the device would end badly.
core:
- make atomic hooks optional
i915:
- Revert a 5.0 regression where some eDP panels stopped working
- DSI related fixes for platforms up to IceLake
- GVT (regression fix, warning fix, use-after free fix)
amdgpu:
- Cursor fixes
- missing PCI ID fix for KFD
- XGMI fix
- shadow buffer handling after reset fix
udl:
- fix unplugging device crashes.
mediatek:
- stabilise MT2701 HDMI support
- fbdev support
* tag 'drm-fixes-2019-04-12' of git://anongit.freedesktop.org/drm/drm: (32 commits)
gpu: host1x: Fix compile error when IOMMU API is not available
drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
drm/i915/dp: revert back to max link rate and lane count on eDP
drm/i915/icl: Fix port disable sequence for mipi-dsi
drm/i915/icl: Ungate ddi clocks before IO enable
drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phy
drm/mediatek: fix the rate and divder of hdmi phy for MT2701
drm/mediatek: fix possible object reference leak
drm/i915: Get power refs in encoder->get_power_domains()
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
drm/amd/display: Fix negative cursor pos programming (v2)
drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
drm/udl: add a release method and delay modeset teardown
drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
drm/i915/gvt: Annotate iomem usage
drm/sun4i: DW HDMI: Lower max. supported rate for H6
Revert "Documentation/gpu/meson: Remove link to meson_canvas.c"
...
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register are treated as 0xfff by the
hardware for comparisons.
So correctly set the exclusion range in the hardware to the
last page which is _in_ the range.
Dave Airlie [Fri, 12 Apr 2019 03:39:22 +0000 (13:39 +1000)]
Merge tag 'drm-intel-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Revert back to max link rate and lane count on eDP.
- DSI related fixes for all platforms including Ice Lake.
- GVT Fixes including one vGPU display plane size regression fix,
one for preventing use-after-free in ppgtt shadow free function,
and another warning fix for iomem access annotation.
Merge tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
Dave Airlie [Thu, 11 Apr 2019 20:55:20 +0000 (06:55 +1000)]
Merge tag 'drm-misc-fixes-2019-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- core: Make atomic_enable and disable optional for CRTC
- dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration
improvements for older controller versions
- omap: a fix for the CEC clock management policy
With the previous value of 2, afu_dma_map_region was being omitted. I
suspect that the code paths have simply changed since the value of 2 was
chosen a decade ago, but it's also possible that it varies based on which
mapping function was used, compiler inlining choices, etc. In any case,
it's best to err on the side of skipping less.
Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Merge tag 'asoc-fix-v5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.1
A few core fixes along with the driver specific ones, mainly fixing
small issues that only affect x86 platforms for various reasons (their
unusual machine enumeration mechanisms mainly, plus a fix for error
handling in topology).
There's some of the driver fixes that look larger than they are, like
the hdmi-codec changes which resulted in an indentation change, and most
of the other large changes are for new drivers like the STM32 changes.
Faiz Abbas [Thu, 11 Apr 2019 08:59:37 +0000 (14:29 +0530)]
mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning
commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback") skips data resets during tuning operation. Because of this,
a data error or data finish interrupt might still arrive after a command
error has been handled and the mrq ended. This ends up with a "mmc0: Got
data interrupt 0x00000002 even though no data operation was in progress"
error message.
Fix this by adding a platform specific callback for sdhci_irq. Mark the
mrq as a failure but wait for a data interrupt instead of calling
finish_mrq().
Fixes: 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
callback") Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stefan Agner [Wed, 10 Apr 2019 22:47:46 +0000 (00:47 +0200)]
gpu: host1x: Fix compile error when IOMMU API is not available
In case the IOMMU API is not available compiling host1x fails with
the following error:
In file included from drivers/gpu/host1x/hw/host1x06.c:27:
drivers/gpu/host1x/hw/channel_hw.c: In function ‘host1x_channel_set_streamid’:
drivers/gpu/host1x/hw/channel_hw.c:118:30: error: implicit declaration of function
‘dev_iommu_fwspec_get’; did you mean ‘iommu_fwspec_free’? [-Werror=implicit-function-declaration]
struct iommu_fwspec *spec = dev_iommu_fwspec_get(channel->dev->parent);
^~~~~~~~~~~~~~~~~~~~
iommu_fwspec_free
Fixes: de5469c21ff9 ("gpu: host1x: Program the channel stream ID") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
drm/i915/gvt: Roundup fb->height into tile's height at calucation fb->size
When fb is tiled and fb->height isn't the multiple of tile's height,
the format fb->size = fb->stride * fb->height, will get a smaller size
than the actual size. As the memory height of tiled fb should be multiple
of tile's height.
Fixes: 7f1a93b1f1d1 ("drm/i915/gvt: Correct the calculation of plane size") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
sparc64/pci_sun4v: fix ATU checks for large DMA masks
Now that we allow drivers to always need to set larger than required
DMA masks we need to be a little more careful in the sun4v PCI iommu
driver to chose when to select the ATU support - a larger DMA mask
can be set even when the platform does not support ATU, so we always
have to check if it is avaiable before using it. Add a little helper
for that and use it in all the places where we make ATU usage decisions
based on the DMA mask.
Fixes: 24132a419c68 ("sparc64/pci_sun4v: allow large DMA masks") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Meelis Roos <mroos@linux.ee> Acked-by: David S. Miller <davem@davemloft.net>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several driver bug fixes posted in the last several weeks
- Several bug fixes for the hfi1 driver 'TID RDMA' functionality
merged into 5.1. Since TID RDMA is on by default these all seem to
be regressions.
- Wrong software permission checks on memory in mlx5
- Memory leak in vmw_pvrdma during driver remove
- Several bug fixes for hns driver features merged into 5.1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/hfi1: Do not flush send queue in the TID RDMA second leg
RDMA/hns: Bugfix for SCC hem free
RDMA/hns: Fix bug that caused srq creation to fail
RDMA/vmw_pvrdma: Fix memory leak on pvrdma_pci_remove
IB/mlx5: Reset access mask when looping inside page fault handler
IB/hfi1: Fix the allocation of RSM table
IB/hfi1: Eliminate opcode tests on mr deref
IB/hfi1: Clear the IOWAIT pending bits when QP is put into error state
IB/hfi1: Failed to drain send queue when QP is put into error state
Kaike Wan [Wed, 10 Apr 2019 13:27:05 +0000 (06:27 -0700)]
IB/hfi1: Do not flush send queue in the TID RDMA second leg
When a QP is put into error state, the send queue will be flushed.
This mechanism is implemented in both the first and the second leg
of the send engine. Since the second leg is only responsible for
data transactions in the KDETH space for the TID RDMA WRITE request,
it should not perform the flushing of the send queue.
This patch removes the flushing function of the second leg, but
still keeps the bailing out of the QP if it is put into error state.
Fixes: 70dcb2e3dc6a ("IB/hfi1: Add the TID second leg send packet builder") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Several fixes, add more reviewers to the list"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: Honour 'may_reduce_num' in vring_create_virtqueue
MAiNTAINERS: add Paolo, Stefan for virtio blk/scsi
virtio_pci: fix a NULL pointer reference in vp_del_vqs
Jani Nikula [Fri, 5 Apr 2019 07:52:20 +0000 (10:52 +0300)]
drm/i915/dp: revert back to max link rate and lane count on eDP
Commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast
and narrow") started to optize the eDP 1.4+ link config, both per spec
and as preparation for display stream compression support.
Sadly, we again face panels that flat out fail with parameters they
claim to support. Revert, and go back to the drawing board.
v2: Actually revert to max params instead of just wide-and-slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959 Fixes: 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: "Lee, Shawn C" <shawn.c.lee@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.0+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com
(cherry picked from commit f11cb1c19ad0563b3c1ea5eb16a6bac0e401f428) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
snd_hdac_display_power() doesn't handle the concurrent calls carefully
enough, and it may lead to the doubly get_power or put_power calls,
when a runtime PM and an async work get called in racy way.
This patch addresses it by reusing the bus->lock mutex that has been
used for protecting the link state change in ext bus code, so that it
can protect against racy display state changes. The initialization of
bus->lock was moved from snd_hdac_ext_bus_init() to
snd_hdac_bus_init() as well accordingly.
Testcase: igt/i915_pm_rpm/module-reload #glk-dsi Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: pcm: fix error handling when try_module_get() fails.
Handle error before returning when try_module_get() fails
to prevent inconsistent mutex lock/unlock.
Fixes: 52034add7 (ASoC: pcm: update module refcount if
module_get_upon_open is set) Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
apparmor: Restore Y/N in /sys for apparmor's "enabled"
Before commit c5459b829b71 ("LSM: Plumb visibility into optional "enabled"
state"), /sys/module/apparmor/parameters/enabled would show "Y" or "N"
since it was using the "bool" handler. After being changed to "int",
this switched to "1" or "0", breaking the userspace AppArmor detection
of dbus-broker. This restores the Y/N output while keeping the LSM
infrastructure happy.
When master clock is used, master clock rate is set exclusively.
Parent clocks of master clock cannot be changed after a call to
clk_set_rate_exclusive(). So the parent clock of SAI kernel clock
must be set before.
Ensure also that exclusive rate operations are balanced
in STM32 SAI driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Brian Norris [Tue, 9 Apr 2019 18:49:17 +0000 (11:49 -0700)]
Bluetooth: btusb: request wake pin with NOAUTOEN
Badly-designed systems might have (for example) active-high wake pins
that default to high (e.g., because of external pull ups) until they
have an active firmware which starts driving it low. This can cause an
interrupt storm in the time between request_irq() and disable_irq().
We don't support shared interrupts here, so let's just pre-configure the
interrupt to avoid auto-enabling it.
Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few minor MIPS fixes:
- Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback()
when handling an IPI triggered by kgdb_roundup_cpus(), matching the
behavior of other architectures & resolving kgdb issues for SMP
systems.
- Defer a pointer dereference until after a NULL check in the
irq_shutdown callback for SGI IP27 HUB interrupts.
- A defconfig update for the MSCC Ocelot to enable some necessary
drivers"
* tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig
MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq
MIPS: KGDB: fix kgdb support for SMP platforms.
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"A few regression fixes from this cycle"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: use kmem_cache_free() instead of kfree()
iov_iter: Fix build error without CONFIG_CRYPTO
aio: Fix an error code in __io_submit_one()
Wangyan Wang [Tue, 9 Apr 2019 06:53:07 +0000 (14:53 +0800)]
drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phy
This is the third step to make MT2701 HDMI stable.
We should not change the rate of parent for hdmi phy when
doing round_rate for this clock. The parent clock of hdmi
phy must be the same as it. We change it when doing set_rate
only.
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
Wangyan Wang [Tue, 9 Apr 2019 06:53:05 +0000 (14:53 +0800)]
drm/mediatek: using new factor for tvdpll for MT2701 hdmi phy
This is the second step to make MT2701 HDMI stable.
The factor depends on the divider of DPI in MT2701, therefore,
we should fix this factor to the right and new one.
Test: search ok
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
Wangyan Wang [Tue, 9 Apr 2019 06:53:03 +0000 (14:53 +0800)]
drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phy
This is the first step to make MT2701 hdmi stable.
The parent rate of hdmi phy had set by DPI driver.
We should not set or change the parent rate of MT2701 hdmi phy,
as a result we should remove the flags of "CLK_SET_RATE_PARENT"
from the clock of MT2701 hdmi phy.
Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
Wangyan Wang [Tue, 9 Apr 2019 06:53:04 +0000 (14:53 +0800)]
drm/mediatek: fix the rate and divder of hdmi phy for MT2701
Due to a clerical error,there is one zero less for 12800000.
Fix it for 128000000 Fixes: 0fc721b2968e ("drm/mediatek: add hdmi driver for MT2701 and MT7623") Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
ASL operation_regions declare a range of addresses that it uses. In a
perfect world, the range of addresses should be used exclusively by
the AML interpreter. The OS can use this information to decide which
drivers to load so that the AML interpreter and device drivers use
different regions of memory.
During table load, the address information is added to a global
address range list. Each node in this list contains an address range
as well as a namespace node of the operation_region. This list is
deleted at ACPI shutdown.
Unfortunately, ASL operation_regions can be declared inside of control
methods. Although this is not recommended, modern firmware contains
such code. New module level code changes unintentionally removed the
functionality of adding and removing nodes to the global address
range list.
A few months ago, support for adding addresses has been re-
implemented. However, the removal of the address range list was
missed and resulted in some systems to crash due to the address list
containing bogus namespace nodes from operation_regions declared in
control methods. In order to fix the crash, this change removes
dynamic operation_regions after control method termination.
Link: https://github.com/acpica/acpica/commit/b2337200 Link: https://bugzilla.kernel.org/show_bug.cgi?id=202475 Fixes: 4abb951b73ff ("ACPICA: AML interpreter: add region addresses in global list during initialization") Reported-by: Michael J Gruber <mjg@fedoraproject.org> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wen Yang [Wed, 3 Apr 2019 16:04:09 +0000 (00:04 +0800)]
drm/mediatek: fix possible object reference leak
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: CK Hu <ck.hu@mediatek.com>
Imre Deak [Sun, 7 Apr 2019 12:46:55 +0000 (15:46 +0300)]
drm/i915: Get power refs in encoder->get_power_domains()
Push getting the reference for the encoders' power domains into the
encoder get_power_domains() hook instead of doing this from the caller.
This way the encoder can store away the corresponding wakerefs.
This fixes the DSI encoder disabling, which didn't release these
power references it acquired during HW state readout.
Note that longtime ownership for the corresponding wakerefs can be thus
acquired / released in two ways. Nevertheless there is always only one
owner for them:
1) Off by one and bounds checking fixes in NFC, from Dan Carpenter.
2) There have been many weird regressions in r8169 since we turned ASPM
support on, some are still not understood nor completely resolved.
Let's turn this back off for now. From Heiner Kallweit.
3) Signess fixes for ethtool speed value handling, from Michael
Zhivich.
4) Handle timestamps properly in macb driver, from Paul Thomas.
5) Two erspan fixes, it's the usual "skb ->data potentially reallocated
and we're holding a stale protocol header pointer". From Lorenzo
Bianconi.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
bnxt_en: Reset device on RX buffer errors.
bnxt_en: Improve RX consumer index validity check.
net: macb driver, check for SKBTX_HW_TSTAMP
qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant
broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant
ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()
net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
net: ip_gre: fix possible use-after-free in erspan_rcv
r8169: disable ASPM again
MAINTAINERS: ieee802154: update documentation file pattern
net: vrf: Fix ping failed when vrf mtu is set to 0
selftests: add a tc matchall test case
nfc: nci: Potential off by one in ->pipes[] array
NFC: nci: Add some bounds checking in nci_hci_cmd_received()
Merge branch 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull TPM fixes from James Morris:
"From Jarkko: These are critical fixes for v5.1. Contains also couple
of new selftests for v5.1 features (partial reads in /dev/tpm0)"
* 'fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selftests/tpm2: Open tpm dev in unbuffered mode
selftests/tpm2: Extend tests to cover partial reads
KEYS: trusted: fix -Wvarags warning
tpm: Fix the type of the return value in calc_tpm2_event_size()
KEYS: trusted: allow trusted.ko to initialize w/o a TPM
tpm: fix an invalid condition in tpm_common_poll
tpm: turn on TPM on suspend for TPM 1.x
Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fixes from Max Filippov:
- fix syscall number passed to trace_sys_exit
- fix syscall number initialization in start_thread
- fix level interpretation in the return_address
- fix format string warning in init_pmd
* tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix format string warning in init_pmd
xtensa: fix return_address
xtensa: fix initialization of pt_regs::syscall in start_thread
xtensa: use actual syscall number in do_syscall_trace_leave
David S. Miller [Mon, 8 Apr 2019 23:39:41 +0000 (16:39 -0700)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: 2 bug fixes.
The first patch prevents possible driver crash if we get a bad RX index
from the hardware. The second patch resets the device when the hardware
reports buffer error to recover from the error.
Please queue these for -stable also. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 8 Apr 2019 21:39:55 +0000 (17:39 -0400)]
bnxt_en: Reset device on RX buffer errors.
If the RX completion indicates RX buffers errors, the RX ring will be
disabled by firmware and no packets will be received on that ring from
that point on. Recover by resetting the device.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 8 Apr 2019 21:39:54 +0000 (17:39 -0400)]
bnxt_en: Improve RX consumer index validity check.
There is logic to check that the RX/TPA consumer index is the expected
index to work around a hardware problem. However, the potentially bad
consumer index is first used to index into an array to reference an entry.
This can potentially crash if the bad consumer index is beyond legal
range. Improve the logic to use the consumer index for dereferencing
after the validity check and log an error message.
Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Thomas [Mon, 8 Apr 2019 19:37:54 +0000 (15:37 -0400)]
net: macb driver, check for SKBTX_HW_TSTAMP
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been
enabled for this skb. It does fix the issue where normal socks that
aren't expecting a timestamp will not wake up on select, but when a
user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work.
Signed-off-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
ethtool: fix use of SPEED_UNKNOWN constant
This patch series addresses 2 related issues:
1. ethtool_validate_speed() triggers a "signed-unsigned comparison"
warning due to type difference of SPEED_UNKNOWN constant (int)
and argument to ethtool_validate_speed (__u32).
2. some drivers use u16 storage for SPEED_UNKNOWN constant,
resulting in value truncation and thus failure to test against
SPEED_UNKNOWN correctly.
This revised series addresses several feedback comments:
- split up the patch in to series
- do not unnecessarily change drivers that use "int" storage
for speed values
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Zhivich [Mon, 8 Apr 2019 14:48:47 +0000 (10:48 -0400)]
qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.
For example, the following test will print "False":
u16 speed = SPEED_UNKNOWN;
if (speed == SPEED_UNKNOWN)
printf("True");
else
printf("False");
Change storage of speed to use u32 to avoid this issue.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Zhivich [Mon, 8 Apr 2019 14:48:46 +0000 (10:48 -0400)]
broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant,
which is defined as -1, resulting in value truncation and
thus incorrect test results against SPEED_UNKNOWN.
For example, the following test will print "False":
u16 speed = SPEED_UNKNOWN;
if (speed == SPEED_UNKNOWN)
printf("True");
else
printf("False");
Change storage of speed to use u32 to avoid this issue.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Zhivich [Mon, 8 Apr 2019 14:48:45 +0000 (10:48 -0400)]
ethtool: avoid signed-unsigned comparison in ethtool_validate_speed()
When building C++ userspace code that includes ethtool.h
with "-Werror -Wall", g++ complains about signed-unsigned comparison in
ethtool_validate_speed() due to definition of SPEED_UNKNOWN as -1.
Explicitly cast SPEED_UNKNOWN to __u32 to match type of
ethtool_validate_speed() argument.
Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 8 Apr 2019 23:16:47 +0000 (16:16 -0700)]
Merge branch 'erspan-use-after-free'
Lorenzo Bianconi says:
====================
fix possible use-after-free in erspan_v{4,6}
Similar to what I did in commit bb9bd814ebf0 ("ipv6: sit: reset ip
header pointer in ipip6_rcv"), fix possible use-after-free in
erspan_rcv and ip6erspan_rcv extracting tunnel metadata since the
packet can be 'uncloned' running __iptunnel_pull_header
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip6_gre: fix possible use-after-free in ip6erspan_rcv
erspan_v6 tunnels run __iptunnel_pull_header on received skbs to remove
erspan header. This can determine a possible use-after-free accessing
pkt_md pointer in ip6erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header
Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ip_gre: fix possible use-after-free in erspan_rcv
erspan tunnels run __iptunnel_pull_header on received skbs to remove
gre and erspan headers. This can determine a possible use-after-free
accessing pkt_md pointer in erspan_rcv since the packet will be 'uncloned'
running pskb_expand_head if it is a cloned gso skb (e.g if the packet has
been sent though a veth device). Fix it resetting pkt_md pointer after
__iptunnel_pull_header
Fixes: 1d7e2ed22f8d ("net: erspan: refactor existing erspan code") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tadeusz Struk [Tue, 12 Feb 2019 23:42:05 +0000 (15:42 -0800)]
selftests/tpm2: Open tpm dev in unbuffered mode
In order to have control over how many bytes are read or written
the device needs to be opened in unbuffered mode.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Tadeusz Struk [Tue, 12 Feb 2019 23:42:10 +0000 (15:42 -0800)]
selftests/tpm2: Extend tests to cover partial reads
Three new tests added:
1. Send get random cmd, read header in 1st read, read the rest in second
read - expect success
2. Send get random cmd, read only part of the response, send another
get random command, read the response - expect success
3. Send get random cmd followed by another get random cmd, without
reading the first response - expect the second cmd to fail with -EBUSY
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Fixes the warning reported by Clang:
security/keys/trusted.c:146:17: warning: passing an object that
undergoes default
argument promotion to 'va_start' has undefined behavior [-Wvarargs]
va_start(argp, h3);
^
security/keys/trusted.c:126:37: note: parameter of type 'unsigned
char' is declared here
unsigned char *h2, unsigned char h3, ...)
^
Specifically, it seems that both the C90 (4.8.1.1) and C11 (7.16.1.4)
standards explicitly call this out as undefined behavior:
The parameter parmN is the identifier of the rightmost parameter in
the variable parameter list in the function definition (the one just
before the ...). If the parameter parmN is declared with ... or with a
type that is not compatible with the type that results after
application of the default argument promotions, the behavior is
undefined.
Link: https://github.com/ClangBuiltLinux/linux/issues/41 Link: https://www.eskimo.com/~scs/cclass/int/sx11c.html Suggested-by: David Laight <David.Laight@aculab.com> Suggested-by: Denis Kenzior <denkenz@gmail.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Jarkko Sakkinen [Mon, 25 Mar 2019 14:43:10 +0000 (16:43 +0200)]
KEYS: trusted: allow trusted.ko to initialize w/o a TPM
Allow trusted.ko to initialize w/o a TPM. This commit also adds checks
to the exported functions to fail when a TPM is not available.
Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Cc: James Morris <jmorris@namei.org> Reported-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Tadeusz Struk [Wed, 27 Mar 2019 18:32:38 +0000 (11:32 -0700)]
tpm: fix an invalid condition in tpm_common_poll
The poll condition should only check response_length,
because reads should only be issued if there is data to read.
The response_read flag only prevents double writes.
The problem was that the write set the response_read to false,
enqued a tpm job, and returned. Then application called poll
which checked the response_read flag and returned EPOLLIN.
Then the application called read, but got nothing.
After all that the async_work kicked in.
Added also mutex_lock around the poll check to prevent
other possible race conditions.
Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <grawity@gmail.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
Jarkko Sakkinen [Fri, 22 Mar 2019 10:51:20 +0000 (12:51 +0200)]
tpm: turn on TPM on suspend for TPM 1.x
tpm_chip_start/stop() should be also called for TPM 1.x devices on
suspend. Add that functionality back. Do not lock the chip because
it is unnecessary as there are no multiple threads using it when
doing the suspend.
Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
There's a significant number of reports that re-enabling ASPM causes
different issues, ranging from decreased performance to system not
booting at all. This affects only a minority of users, but the number
of affected users is big enough that we better switch off ASPM again.
This will hurt notebook users who are not affected by the issues, they
may see decreased battery runtime w/o ASPM. With the PCI core folks is
being discussed to add generic sysfs attributes to control ASPM.
Once this is in place brave enough users can re-enable ASPM on their
system.
Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
virtio: Honour 'may_reduce_num' in vring_create_virtqueue
vring_create_virtqueue() allows the caller to specify via the
may_reduce_num parameter whether the vring code is allowed to
allocate a smaller ring than specified.
However, the split ring allocation code tries to allocate a
smaller ring on allocation failure regardless of what the
caller specified. This may cause trouble for e.g. virtio-pci
in legacy mode, which does not support ring resizing. (The
packed ring code does not resize in any case.)
Let's fix this by bailing out immediately in the split ring code
if the requested size cannot be allocated and may_reduce_num has
not been specified.
While at it, fix a typo in the usage instructions.
Fixes: 2a2d1382fe9d ("virtio: Add improved queue allocation API") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
When moving the documentation for the ieee802154 subsystem from
plain text to rst the file pattern in the MAINTAINERS file got wrong.
Updating it here to fix scripts using this file.
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
As SCC context is still used by hardware after qp free, we can solve this
problem by removing SCC hem free from hns_roce_qp_free.
Fixes: 6a157f7d1b14 ("RDMA/hns: Add SCC context allocation support for hip08") Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Lijun Ou [Sun, 7 Apr 2019 05:23:38 +0000 (13:23 +0800)]
RDMA/hns: Fix bug that caused srq creation to fail
Due to the incorrect use of the seg and obj information, the position of
the mtt is calculated incorrectly, and the free space of the page is not
enough to store the entire mtt, resulting in access to the next page. This
patch fixes this problem.
Unable to handle kernel paging request at virtual address ffff00006e3cd000
...
Call trace:
hns_roce_write_mtt+0x154/0x2f0 [hns_roce]
hns_roce_buf_write_mtt+0xa8/0xd8 [hns_roce]
hns_roce_create_srq+0x74c/0x808 [hns_roce]
ib_create_srq+0x28/0xc8
Fixes: 0203b14c4f32 ("RDMA/hns: Unify the calculation for hem index in hip08") Signed-off-by: chenglang <chenglang@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ville Syrjälä [Fri, 5 Apr 2019 14:13:49 +0000 (17:13 +0300)]
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
The only bpc information in pipe registers for BXT/GLK DSI
is the PIPEMISC dither bpc. Let's try to use that to read
out pipe_bpp on these platforms. However, I'm not sure if
this will be correctly populated by the GOP since bspec
suggests it's only needed if dithering is actually enabled.
If not I guess we'll have to go one step further and
extract pipe_bpp from the DSI pixel format when dithering
is disabled.
Cc: Hans de Goede <hdegoede@redhat.com> Fixes: ca0b04db14a5 ("drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats")
References: https://bugs.freedesktop.org/show_bug.cgi?id=109516 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405141349.11950-1-ville.syrjala@linux.intel.com
(cherry picked from commit 499653501baf27d26e73cb5ce744869df3400509) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Why]
If the cursor pos passed from DM is less than the plane_state->dst_rect
top left corner then the unsigned cursor pos wraps around to a large
positive number since cursor pos is a u32.
There was an attempt to guard against this in hubp1_cursor_set_position
by checking the src_x_offset and src_y_offset and offseting the
cursor hotspot within hubp1_cursor_set_position.
However, the cursor position itself is still being programmed
incorrectly as a large value.
This manifests itself visually as the cursor disappearing or containing
strange artifacts near the middle of the screen on raven.
[How]
Don't subtract the destination rect top left corner from the pos but
add it to the hotspot instead. This happens before the pos gets
passed into hubp1_cursor_set_position.
This achieves the same result but avoids the subtraction wrap around.
With this fix the original cursor programming logic can be used again.
v2: add hunk that got dropped accidently when this patch was originally
committed. (Alex) Fixes: 0921c41e1902831 ("drm/amd/display: Fix negative cursor pos programming") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hui Wang [Mon, 8 Apr 2019 07:58:11 +0000 (15:58 +0800)]
ALSA: hda - Add two more machines to the power_save_blacklist
Recently we set CONFIG_SND_HDA_POWER_SAVE_DEFAULT to 1 when
configuring the kernel, then two machines were reported to have noise
after installing the new kernel. Put them in the blacklist, the
noise disappears.
Ondrej Jirman [Fri, 5 Apr 2019 23:30:48 +0000 (01:30 +0200)]
drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in sun8i_tcon_top_un/bind
There are two problems here:
1. Not all clk_data->hws[] need to be initialized, depending on various
configured quirks. This leads to NULL ptr deref in
clk_hw_unregister_gate() in sun8i_tcon_top_unbind()
2. If there is error when registering the clk_data->hws[],
err_unregister_gates error path will try to unregister
IS_ERR()=true (invalid) pointer.
ASoC: pcm: update module refcount if module_get_upon_open is set
Setting the module_get_upon_open field for component driver
prevents the module refcount from being incremented during
component probe(). This could lead to the module being
allowed to be unloaded when a pcm stream is open. So,
if this field is set, the module's refcount should be
incremented during pcm open to prevent module removal
when the component is in use. And, the refcount should
be decremented upon pcm close.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: core: conditionally increase module refcount on component open
Recently, for Intel platforms the "ignore_module_refcount" field
was introduced for the component driver. In order to avoid a
deadlock preventing the PCI modules from being removed
even when the card was idle, the refcounts were not incremented
for the device driver module during component probe.
However, this change introduced a nasty side effect:
the device driver module can be unloaded while a pcm stream is open.
This patch proposes to change the field to be renamed as
"module_get_upon_open". When this field is set, the module
refcount should be incremented on pcm open amd decremented
upon pcm close. This will enable modules to be removed
when no PCM playback/capture happens and prevent removal
when the component is actually in use.
Also, align with the skylake component driver with the new name.
This patch fixes the sai driver structure overwriting which results in
a cpu dai name equal NULL.
Fixes: 3e086ed ("ASoC: stm32: add SAI driver") Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: topology: Use the correct dobj to free enum control values and texts
The control values and texts of the enum kcontrol associated
with a widget need to be freed when the widget is removed.
However, both struct snd_soc_dapm_widget and struct soc_enum
contain a dobj member, which resulted in a confusion.
The existing code generates a null pointer dereference by
attempting to free the values and texts from the dobj which
belongs to the widget instead of the dobj belonging to the
enum kcontrol.
The suggested fix is to use the correct dobj member (se->dobj)
of the enum kcontrol.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Dave Airlie [Fri, 5 Apr 2019 03:17:13 +0000 (13:17 +1000)]
drm/udl: add a release method and delay modeset teardown
If we unplug a udl device, the usb callback with deinit the
mode_config struct, however userspace will still have an open
file descriptor and a framebuffer on that device. When userspace
closes the fd, we'll oops because it'll try and look stuff up
in the object idr which we've destroyed.
This punts destroying the mode objects until release time instead.
Miaohe Lin [Mon, 8 Apr 2019 02:04:20 +0000 (10:04 +0800)]
net: vrf: Fix ping failed when vrf mtu is set to 0
When the mtu of a vrf device is set to 0, it would cause ping
failed. So I think we should limit vrf mtu in a reasonable range
to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it
will works for both ipv4 and ipv6. And if dev->max_mtu still be 0
can be confusing, so I set dev->max_mtu to ETH_MAX_MTU.
Here is the reproduce step:
1.Config vrf interface and set mtu to 0:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
2.Ping peer:
3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrf1 state UP group default qlen 1000
link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.1/16 scope global enp4s0
valid_lft forever preferred_lft forever
connect: Network is unreachable
3.Set mtu to default value, ping works:
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms
Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Sat, 6 Apr 2019 22:59:01 +0000 (18:59 -0400)]
slab: fix a crash by reading /proc/slab_allocators
The commit 510ded33e075 ("slab: implement slab_root_caches list")
changes the name of the list node within "struct kmem_cache" from "list"
to "root_caches_node", but leaks_show() still use the "list" which
causes a crash when reading /proc/slab_allocators.
You need to have CONFIG_SLAB=y and CONFIG_MEMCG=y to see the problem,
because without MEMCG all slab caches are root caches, and the "list"
node happens to be the right one.
Fixes: 510ded33e075 ("slab: implement slab_root_caches list") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Tobin C. Harding <tobin@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Wilson [Thu, 4 Apr 2019 07:30:56 +0000 (08:30 +0100)]
drm/i915/gvt: Prevent use-after-free in ppgtt_free_all_spt()
ppgtt_free_all_spt() iterates the radixtree as it is deleting it,
forgoing all protection against the leaves being freed in the process
(leaving the iter pointing into the void).
A minimal fix seems to be to use the available post_shadow_list to
decompose the tree into a list prior to destroying the radixtree.
Alerted by the sparse warnings:
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
drivers/gpu/drm/i915/gvt/gtt.c:758:45: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:758:45: expected void [noderef] <asn:4> **slot
drivers/gpu/drm/i915/gvt/gtt.c:758:45: got void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void [noderef] <asn:4> **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/gtt.c:757:9: expected void **slot
drivers/gpu/drm/i915/gvt/gtt.c:757:9: got void [noderef] <asn:4> **
This would also have been loudly warning if run through CI for the
invalid RCU dereferences.
Fixes: b6c126a39345 ("drm/i915/gvt: Manage shadow pages with radix tree") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Changbin Du <changbin.du@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Chris Wilson [Thu, 4 Apr 2019 07:14:25 +0000 (08:14 +0100)]
drm/i915/gvt: Annotate iomem usage
Fix the sparse warning for blithely using iomem with normal memcpy:
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: expected void *aperture_va
drivers/gpu/drm/i915/gvt/kvmgt.c:916:21: got void [noderef] <asn:2> *
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: expected void [noderef] <asn:2> *vaddr
drivers/gpu/drm/i915/gvt/kvmgt.c:927:26: got void *aperture_va
Fixes: d480b28a41a6 ("drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes from the last few weeks. Most of them are
smaller tweaks and fixes to DT and hardware descriptions for boards.
Some of the more significant ones are:
- eMMC and RGMII stability tweaks for rk3288
- DDC fixes for Rock PI 4
- Audio fixes for two TI am335x eval boards
- D_CAN clock fix for am335x
- Compilation fixes for clang
- !HOTPLUG_CPU compilation fix for one of the new platforms this
release (milbeaut)
- A revert of a gpio fix for nomadik that instead was fixed in the
gpio subsystem
- Whitespace fix for the DT JSON schema (no tabs allowed)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
ARM: iop: don't use using 64-bit DMA masks
ARM: orion: don't use using 64-bit DMA masks
Revert "ARM: dts: nomadik: Fix polarity of SPI CS"
dt-bindings: cpu: Fix JSON schema
arm/mach-at91/pm : fix possible object reference leak
ARM: dts: at91: Fix typo in ISC_D0 on PC9
ARM: dts: Fix dcan clkctrl clock for am3
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
ARM: dts: rockchip: Fix gpu opp node names for rk3288
ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
ARM: dts: am335x-evm: Correct the regulators for the audio codec
ARM: OMAP2+: add missing of_node_put after of_device_is_available
ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's
arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
...
Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fixups for the pf/pcd queue handling (YueHaibing)
- Revert of the three direct issue changes as they have been proven to
cause an issue with dm-mpath (Bart)
- Plug rq_count reset fix (Dongli)
- io_uring double free in fileset registration error handling (me)
- Make null_blk handle bad numa node passed in (John)
- BFQ ifdef fix (Konstantin)
- Flush queue leak fix (Shenghui)
- Plug trace fix (Yufen)
* tag 'for-linus-20190407' of git://git.kernel.dk/linux-block:
xsysace: Fix error handling in ace_setup
null_blk: prevent crash from bad home_node value
block: Revert v5.0 blk_mq_request_issue_directly() changes
paride/pcd: Fix potential NULL pointer dereference and mem leak
blk-mq: do not reset plug->rq_count before the list is sorted
paride/pf: Fix potential NULL pointer dereference
io_uring: fix double free in case of fileset regitration failure
blk-mq: add trace block plug and unplug for multiple queues
block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
Arnd Bergmann [Wed, 13 Mar 2019 21:19:16 +0000 (22:19 +0100)]
ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
When HOTPLUG_CPU is disabled, some fields in the smp operations
are not available or needed:
arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type
'struct smp_operations'
.cpu_die = m10v_cpu_die,
^
arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type
'struct smp_operations'
.cpu_kill = m10v_cpu_kill,
^
Hide them in an #ifdef like the other platforms do.
Fixes: 9fb29c734f9e ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
can you please revert this patch. It was the wrong solution to the
wrong problem, and I must have acted in stress. Andrey fixed the
real bug in a proper way in these commits:
Olof Johansson [Sun, 7 Apr 2019 22:16:38 +0000 (15:16 -0700)]
Merge tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.1-rc cycle
Few small fixes for omap variants:
- Fix ams-delta gpio IDs
- Add missing of_node_put for omapdss platform init code
- Fix unconfigured audio regulators for two am335x boards
- Fix use of wrong offset for am335x d_can clocks
* tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dcan clkctrl clock for am3
ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
ARM: dts: am335x-evm: Correct the regulators for the audio codec
ARM: OMAP2+: add missing of_node_put after of_device_is_available
ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
projects / mirror_ubuntu-focal-kernel.git / log