Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.
To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.
The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.
Replace the WARN_ONCE with a less intrusive pr_warn_once().
It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.
Reported-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.
+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++
This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The gpio-aspeed-sgpio driver implements an irq_chip which need to be
invoked from hardirq context. Since spin_lock() can sleep with
PREEMPT_RT, it is no longer legal to invoke it while interrupts are
disabled.
This also causes lockdep to complain about:
[ 25.919465] [ BUG: Invalid wait context ]
because aspeed_sgpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[ 0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.
The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.
This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.
Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.
Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".
The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Below warning disappeared after this change.
[ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error
[ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0
[ 914.117583] ======================================================
[ 914.117592] WARNING: possible circular locking dependency detected
[ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE
[ 914.117611] ------------------------------------------------------
[ 914.117618] ifconfig/2805 is trying to acquire lock:
[ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[ 914.117674]
but task is already holding lock:
[ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.117872]
which lock already depends on the new lock.
If we use the module stall_cpu option, we may get a soft lockup warning
in case we also don't pass the stall_cpu_block option.
Introduce the stall_no_softlockup option to avoid a soft lockup on
cpu stall even if we don't use the stall_cpu_block option.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.
If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.
Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.
The binding node names for the thermal zones are not successfully
validated by the dt-schemas.
Fix the validation by changing from sensor-thermalN or thermal-sensor-N
to sensorN-thermal. Provide node labels of the form sensorN_thermal to
ensure consistency with the other platform implementations.
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.
So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000
It fixes the following runtime warnings:
Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.
This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.
Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For larger (bigger than a page) and noncontiguous mobs we have
to create page tables that allow the host to find the memory.
Those page tables just used regular system memory. Unfortunately
in TTM those BO's are not allowed to be busy thus can't be
fenced and we have to fence those bo's because we don't want
to destroy the page tables while the host is still executing
the command buffers which might be accessing them.
To solve it we introduce a new placement VMW_PL_SYSTEM which
is very similar to TTM_PL_SYSTEM except that it allows
fencing. This fixes kernel oops'es during unloading of the driver
(and pci hot remove/add) which were caused by busy BO's in
TTM_PL_SYSTEM being present in the delayed deletion list in
TTM (TTM_PL_SYSTEM manager is destroyed before the delayed
deletions are executed)
Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Martin Krastev <krastevm@vmware.com> Cc: Christian König <christian.koenig@amd.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211105193845.258816-5-zackr@vmware.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.
Also free the skb which is missing currently in these
callbacks.
Crash_info:
[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[19282.489515] pgd = 91eb8000
[19282.496702] [00000000] *pgd=00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.
The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ
The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.
Attached is the KASAN report from fuzzing.
BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr ffff888019439fdb by task RX-Thread/227
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.
The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.
The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.
This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).
Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().
Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller. Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().
Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20211125020349.4980-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The others are superfluous with tty refcounting in place now. And they
are racy in fact:
* tty_port_initialized() reports false for a small moment after
interrupts are enabled.
* closing is 1 while the port is still alive.
The queues are flushed later during close anyway. So there is no need
for this special handling. Actually, the ISR should not flush the
queues. It should behave as every other driver, just queue the chars
into tty buffer and go on. But this will be changed later. There is
still a lot code depending on having tty in ISR (and not only tty_port).
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211118073125.12283-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.
This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:
On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.
Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].
Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Disable vblanks immediately to save power. I think this was
missed when we merged DC support.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
^
top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In case the following power domain sequence happens, iMX8M Mini always hangs:
gpumix:on -> gpu:on -> gpu:off -> gpu:on
This is likely due to another quirk of the GPC block. This situation can be
prevented by always synchronously powering off both the domain and MIX domain.
Make it so. This turns the aforementioned sequence into:
gpumix:on -> gpu:on -> gpu:off -> gpumix:off -> gpumix:on -> gpu:on
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.
do_div() does a 64-by-32 division. Here the divisor is an
unsigned long which on some platforms is 64 bit wide. So use
div64_ul instead of do_div to avoid a possible truncation.
Eliminate the following coccicheck warning:
./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING:
do_div() does a 64-by-32 division, please consider using div64_ul
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
According to [0], compilers sometimes might produce duplicate DWARF
definitions for exactly the same struct/union within the same
compilation unit (CU). We've had similar issues with identical arrays
and handled them with a similar workaround in 6b6e6b1d09aa ("libbpf:
Accomodate DWARF/compiler bug with duplicated identical arrays"). Do the
same for struct/union by ensuring that two structs/unions are exactly
the same, down to the integer values of field referenced type IDs.
Solving this more generically (allowing referenced types to be
equivalent, but using different type IDs, all within a single CU)
requires a huge complexity increase to handle many-to-many mappings
between canonidal and candidate type graphs. Before we invest in that,
let's see if this approach handles all the instances of this issue in
practice. Thankfully it's pretty rare, it seems.
A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.
In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.
Fix this by adding a check after reading the value of the register.
The following KASAN report reveals it:
BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr ffff8880608c00a0 by task swapper/2/0
Memory state around the buggy address: ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
^ ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
When connected over USB, the Apple Magic Mouse 2 and the Apple Magic
Trackpad 2 register multiple interfaces, one of them is used to report
the battery level.
However, unlike when connected over Bluetooth, the battery level is not
reported automatically and it is required to fetch it manually.
Fix the battery report descriptor and add a timer to fetch the battery
level.
Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Simon Ser <contact@emersion.fr> Tested-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
We've noticed cases where tasks in a cgroup are stalled on memory but
there is little memory FULL pressure since tasks stay on the runqueue
in reclaim.
A simple example involves a single threaded program that keeps leaking
and touching large amounts of memory. It runs in a cgroup with swap
enabled, memory.high set at 10M and cpu.max ratio set at 5%. Though
there is significant CPU pressure and memory SOME, there is barely any
memory FULL since the task enters reclaim and stays on the runqueue.
However, this memory-bound task is effectively stalled on memory and
we expect memory FULL to match memory SOME in this scenario.
The code is confused about memstall && running, thinking there is a
stalled task and a productive task when there's only one task: a
reclaimer that's counted as both. To fix this, we redefine the
condition for PSI_MEM_FULL to check that all running tasks are in an
active memstall instead of checking that there are no running tasks.
This will capture reclaimers. It will also capture tasks that called
psi_memstall_enter() and are about to sleep, but this should be
negligible noise.
Signed-off-by: Brian Chen <brianchen118@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: https://lore.kernel.org/r/20211110213312.310243-1-brianchen118@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.
The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit 9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.
It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.
Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Link: https://lore.kernel.org/r/1636712682-1226-1-git-send-email-quic_pkondeti@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Due to (wIndex & 0xff) - 1 can get an integer greater than 15, this
can cause array index to be out of bounds since the size of array
port_status is 15. This change prevents a possible out-of-bounds
pointer computation by forcing the use of a valid port number.
Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20211113165320.GA59686@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
reset_control_(de)assert() calls are called on a shared reset line when
reset_control_reset has been used. This is not allowed by the reset
framework.
Use reset_control_rearm() call in suspend() and remove() as a way to state
that the resource is no longer used, hence the shared reset line
may be triggered again by other devices. Use reset_control_rearm() also in
case probe fails after reset() has been called.
reset_control_rearm() keeps use of triggered_count sane in the reset
framework, use of reset_control_reset() on shared reset line should be
balanced with reset_control_rearm().
Commit 31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.
In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.
Fix this issue by simply removing those ring masks.
The succ var tracks memory allocation erros on this function.
Fix it, in order to stop this W=1 Werror in clang:
drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
bool succ = true;
^
Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Currently, creating a batman-adv interface in an unprivileged LXD
container and attaching secondary interfaces to it with "ip" or "batctl"
works fine. However all batctl debug and configuration commands
fail:
To fix this change the generic netlink permissions from GENL_ADMIN_PERM
to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully
maintainable as root from within a user namespace, from an unprivileged
container.
All except one batman-adv netlink setting are per interface and do not
leak information or change settings from the host system and are
therefore save to retrieve or modify as root from within an unprivileged
container.
"batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only
exception: It provides the batman-adv kernel module wide default routing
algorithm. However it is read-only from netlink and an unprivileged
container is still not allowed to modify
/sys/module/batman_adv/parameters/routing_algo. Instead it is advised to
use the newly introduced "batctl if create routing_algo RA_NAME" /
IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface
creation, which already works fine in an unprivileged container.
Cc: Tycho Andersen <tycho@tycho.pizza> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.
Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20211018014503.7598-1-wanjiabing@vivo.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Now that we restore the default or last user set exposure setting on
power_up() there is no need for the registers written by ov2680_set_fmt()
to write to the exposure register.
Not doing so fixes the exposure always being reset to the value from
the res->regs array after a set_fmt().
The atomisp driver originally used the s_parm command to
initialize the run_mode type to the driver. So, before start
setting up the streaming, s_parm should be called.
So, even having 5 "normal" video devices, one meant to be used
for each type, the run_mode was actually selected when
s_parm is called.
Without setting the run mode, applications that don't call
VIDIOC_SET_PARM with a custom atomisp parameters won't work, as
the pipeline won't be set:
atomisp-isp2 0000:00:03.0: can't create streams
atomisp-isp2 0000:00:03.0: __get_frame_info 1600x1200 (padded to 0) returned -22
However, commit 8a7c5594c020 ("media: v4l2-ioctl: clear fields in s_parm")
broke support for it, with a good reason, as drivers shoudn't be
extending the API for their own purposes.
So, as an step to allow generic apps to use this driver, put
the device's run_mode in preview after open.
After this patch, using v4l2grab starts to work on preview
mode (/dev/video2):
The internal try_fmt logic is not meant to provide everything
that the V4L2 API should provide. Also, it doesn't decrement
the pads that are used only internally by the driver, but aren't
part of the device's output.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10 Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log] Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.
skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is 00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
If we remove one instance of adv using Set Extended Adv Enable, there
is a possibility of issue occurs when processing the Command Complete
event. Especially, the adv_info might not be found since we already
remove it in hci_req_clear_adv_instance() -> hci_remove_adv_instance().
If that's the case, we will mistakenly proceed to remove all adv
instances instead of just one single instance.
This patch fixes the issue by checking the content of the HCI command
instead of checking whether the adv_info is found.
Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
hci_alloc_dev() do not init the device's flag. And hci_free_dev()
using put_device() to free the memory allocated for this device,
but it calls just put_device(dev) only in case of HCI_UNREGISTER
flag is set, So any error handing before hci_register_dev() success
will cause memory leak.
To avoid this behaviour we can using kfree() to release dev before
hci_register_dev() success.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.
Fixes: a5d3d1adc95f ("leds: lp55xx: Initialize enable GPIO direction to output") Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors") Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Fixes: ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors") Signed-off-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x2cc): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `BIT_initDStream':
decompress.c:(.text.BIT_initDStream+0x7c): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.BIT_initDStream+0x158): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_buildFSETable_body_default.constprop.0':
decompress.c:(.text.ZSTD_buildFSETable_body_default.constprop.0+0x2a8): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_readNCount_body_default':
decompress.c:(.text.FSE_readNCount_body_default+0x130): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x1a4): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x2e4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `HUF_readStats_body_default':
decompress.c:(.text.HUF_readStats_body_default+0x184): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.HUF_readStats_body_default+0x1b4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_DCtx_getParameter':
decompress.c:(.text.ZSTD_DCtx_getParameter+0x60): undefined reference to `__clzdi2'
Fixes: a510b616131f ("MIPS: Add support for ZSTD-compressed kernels") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.
Fixes these build errors:
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In commit 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove
already reserved regions") we returned -EBUSY when trying to mark
regions as no-map when they intersect with reserved memory. The goal was
to find bad no-map reserved memory DT nodes that would unmap the kernel
text/data sections.
The problem is the reserved memory check will still trigger if the DT
has a /memreserve/ that completely subsumes the no-map memory carveouts
in the reserved memory node _and_ that region is also not part of the
memory reg property. For example in sc7180.dtsi we have the following
reserved-memory and memory node:
memory@80000000 {
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
memory@80000000 {
/* The bootloader fills in the size, and adds another region */
reg = <0 0x80000000 0 0x00800000>,
<0 0x80c00000 0 0x7f200000>;
};
The smem region is doubly reserved via /memreserve/ and by not being
part of the /memory reg property. This leads to the following warning
printed at boot.
OF: fdt: Reserved memory: failed to reserve memory for node 'memory@80900000': base 0x0000000080900000, size 2 MiB
Otherwise nothing really goes wrong because the smem region is not going
to be mapped by the kernel's direct linear mapping given that it isn't
part of the memory node. Therefore, let's only consider this to be a
problem if we're trying to mark a region as no-map and it is actually
memory that we're intending to keep out of the kernel's direct mapping
but it's already been reserved.
Acked-by: Mike Rapoport <rppt@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Quentin Perret <qperret@google.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 8a5a75e5e9e5 ("of/fdt: Make sure no-map does not remove already reserved regions") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220107194233.2793146-1-swboyd@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a3211 ("of: Improve of_phandle_iterator_next() error message") Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>