Michel Thierry [Tue, 31 Oct 2017 22:53:09 +0000 (15:53 -0700)]
drm/i915/guc: Add support for reset engine using GuC commands
This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.
In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.
Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.
v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.
v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)
v4: Rebase.
v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.
v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Michel Thierry [Mon, 30 Oct 2017 18:56:14 +0000 (11:56 -0700)]
drm/i915/guc: Rename the function that resets the GuC
intel_guc_reset sounds more like the microcontroller is the one performing
a reset, while in this case is the opposite. intel_reset_guc not only
makes it clearer, it follows the other intel_reset functions available.
Jeff McGee [Wed, 1 Nov 2017 22:16:30 +0000 (15:16 -0700)]
drm/i915/guc: Clear terminated attribute bit on GuC preemption context
If GuC firmware performs an engine reset while that engine had a
preemption pending, it will set the terminated attribute bit on our
preemption stage descriptor. GuC firmware retains all pending work
items for a high-priority GuC client, unlike the normal-priority GuC
client where work items are dropped. It wants to make sure the preempt-
to-idle work doesn't run when scheduling resumes, and uses this bit to
inform its scheduler and presumably us as well. Our job is to clear it
for the next preemption after reset, otherwise that and future
preemptions will never complete. We'll just clear it every time.
Chris Wilson [Fri, 27 Oct 2017 11:06:16 +0000 (12:06 +0100)]
drm/i915: Move parking-while-active warning to intel_engines_park()
We will want to break this down to give detailed per-engine warnings as
to why we still think we are active as we attempt to park the engines.
For the first step, just move the warning verbatim from the idle-worker
to intel_engines_park().
Chris Wilson [Tue, 31 Oct 2017 12:22:35 +0000 (12:22 +0000)]
drm/i915: Check that the breadcrumb wasn't disarmed automatically before parking
We will disarm the breadcrumb interrupt if we see a user interrupt
whilst no one is waiting. This may race with the call to
intel_engine_disarm_breadcrumbs() triggering an assert that we aren't
trying to do the same job twice. Prevent this by checking that the irq
is still armed after flushing the interrupt (for the irq spinlock).
Fixes: bcbd5c33a342 ("drm/i915/guc: Always enable the breadcrumbs irq") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031122235.1395-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 31 Oct 2017 10:36:07 +0000 (10:36 +0000)]
drm/i915: Check incoming alignment for unfenced buffers (on i915gm)
In case the object has changed tiling between calls to execbuf, we need
to check if the existing offset inside the GTT matches the new tiling
constraint. We even need to do this for "unfenced" tiled objects, where
the 3D commands use an implied fence and so the object still needs to
match the physical fence restrictions on alignment (only required for
gen2 and early gen3).
In commit 2889caa92321 ("drm/i915: Eliminate lots of iterations over
the execobjects array"), the idea was to remove the second guessing and
only set the NEEDS_MAP flag when required. However, the entire check
for an unusable offset for fencing was removed and not just the
secondary check. I.e.
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
!i915_vma_is_map_and_fenceable(vma))
return !only_mappable_for_reloc(entry->flags);
was entirely removed as the ping-pong between execbuf passes was fixed,
but its primary purpose in forcing unaligned unfenced access to be
rebound was forgotten.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502 Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Michel Thierry [Fri, 27 Oct 2017 22:32:07 +0000 (15:32 -0700)]
drm/i915/cnl: Remove unnecessary check in cnl_setup_private_ppat
There is no need check if PPGTT is disabled because that not possible
in CNL. Execlists and GuC submission modes rely on at least aliasing
PPGTT and even intel_sanitize_enable_ppgtt says: "We don't allow disabling
PPGTT for gen9+ as it's a requirement for execlists, the sole mechanism
available to submit work."
Ville Syrjälä [Mon, 30 Oct 2017 18:46:54 +0000 (20:46 +0200)]
drm/i915: Remove most encoder->type uses from the audio code
encoder->type isn't genreally safe around DDI ports, so let's
replace some uses in the audio code with the crtc state's
output_types instead.
Actually in these cases encoder->type would work since the DP
SST case is only relevant for VLV/CHV and encoder->type==DP
is a thing on those platforms. The DP MST cases would work
as well since MST encoder->type==DP_MST always. But I think
it's best to try and minimize the encoder->type use in general
to avoid showing a bad example to people.
Ville Syrjälä [Mon, 30 Oct 2017 18:46:53 +0000 (20:46 +0200)]
drm/i915: Pass around crtc and connector states for audio
Explicitly pass the crtc and connector states into the audio
code enable/disable hooks, and plumb them all the way down.
This gets rid of almost all crtc->config and encoder->crtc
uses. The one place where we still use them is
i915_audio_component_sync_audio_rate() since that gets called from
the audio driver and we don't have explicit states around then.
Chris Wilson [Mon, 30 Oct 2017 17:29:27 +0000 (17:29 +0000)]
drm/i915: Replace "cc-option -Wno-foo" with "cc-disable-warning foo"
To quote kbuild/makefiles.txt:
cc-disable-warning checks if gcc supports a given warning and returns
the commandline switch to disable it. This special function is needed,
because gcc 4.4 and later accept any unknown -Wno-* option and only
warn about it if there is another warning in the source file.
This is exactly what we were trying to achieve with cc-option -Wno-foo and
failed miserably.
Reported-by: kbuild-all@01.org Fixes: 39bf4de89ff7 ("drm/i915: Add -Wall -Wextra to our build, set warnings to full") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171030172927.18158-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Ville Syrjälä [Fri, 27 Oct 2017 19:31:28 +0000 (22:31 +0300)]
drm/i915: Use intel_ddi_get_config() for MST
Eliminate the partially duplicated DDI readout code from MST, and
instead just call intel_ddi_get_config(). As a nice bonus we get
more cross checking as intel_ddi_get_config() will populate
output_types based on the actual mode of the DDI port.
Additonally intel_ddi_get_config() must be changed to get the crtc
from the passed in crtc state rather than from the encoder->crtc link.
encoder->crtc really shouldn't be used anyway.
v2: Rebased on BXT MST latency_optim fix
Make intel_ddi_clock_get() static
Ville Syrjälä [Fri, 27 Oct 2017 19:31:27 +0000 (22:31 +0300)]
drm/i915: Pass a crtc state to ddi post_disable from MST code
Pass an old crtc state to intel_ddi_post_disable() from the MST code.
Note that this crtc state won't necessaitly match the one that was
passed to intel_ddi_pre_enable() if the first stream to be enabled isn't
the last stream to be disabled. But this is fine since the states should
be identical in every important way. This does mean people frobbing
the DDI pre_enable/post_disable hooks have to pay attention in what
parts of the state they consult.
The alternative would be to inline the relevant code into the MST code.
That is actually what we used to do for pre_enable before
commit e081c8463ac9 ("drm/i915: Remove duplicate DDI enabling logic
from MST path"). For post_disable we've always called the DDI hook.
v2: Pimp up the comments explaining the MST issues
Ville Syrjälä [Fri, 27 Oct 2017 19:31:26 +0000 (22:31 +0300)]
drm/i915: Eliminate pll->state usage from bxt_calc_pll_link()
We should be using the DPLL hw state we got from the current crtc state
to determine the corresponding port clock frequency rather than getting
it via the current state programmed into the DPLL.
Ville Syrjälä [Fri, 27 Oct 2017 19:31:25 +0000 (22:31 +0300)]
drm/i915: Nuke intel_ddi_get_encoder_port()
encoder->port works for FDI, and it also works for MST (regardless of
whether we're dealing with the "fake" MST encoder, or mst->primary).
So let's eliminate intel_ddi_get_encoder_port().
Ville Syrjälä [Fri, 27 Oct 2017 19:31:24 +0000 (22:31 +0300)]
drm/i915: Stop frobbing with DDI encoder->type
Currently the DDI encoder->type will change at runtime depending on
what kind of hotplugs we've processed. That's quite bad since we can't
really trust that that current value of encoder->type actually matches
the type of signal we're trying to drive through it.
Let's eliminate that problem by declaring that non-eDP DDI port will
always have the encoder type as INTEL_OUTPUT_DDI. This means the code
can no longer try to distinguish DP vs. HDMI based on encoder->type.
We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
there's a bunch of code that relies on that value to identify eDP
encoders.
We'll introduce a new encoder .compute_output_type() hook. This allows
us to compute the full output_types before any encoder .compute_config()
hooks get called, thus those hooks can rely on output_types being
correct, which is useful for cloning on oldr platforms. For now we'll
just look at the connector type and pick the correct mode based on that.
In the future the new hook could be used to implement dynamic switching
between LS and PCON modes for LSPCON.
v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
v4: Rebase
v5: Populate output_types in .get_config() rather than in the caller
v5: Split out populating output_types in .get_config() (Maarten)
Ville Syrjälä [Fri, 27 Oct 2017 19:31:23 +0000 (22:31 +0300)]
drm/i915: Populate output_types from .get_config()
Rather than having the caller of .get_config() set output_types based on
encoder->type, let's just have .get_config() itself populate
output_types. This way we are isolated from encoder->type, which won't
be useable for this purpose anyway soon (at least for DDI encoders).
Ville Syrjälä [Mon, 30 Oct 2017 14:57:02 +0000 (16:57 +0200)]
drm/i915: Parse max HDMI TMDS clock from VBT
Starting from version 204 VBT can specify the max TMDS clock we are
allowed to use with HDMI ports. Parse that information and take it
into account when filtering modes and computing a crtc state.
Also take the opportunity to sort the platform check if ladder
from new to old.
v2: Add defines for the values into intel_vbt_defs.h (Jani)
Don't fall back to 0 silently for unknown values (Jani)
Skip the debug print for the 0 case (Jani)
Ville Syrjälä [Fri, 27 Oct 2017 09:45:23 +0000 (12:45 +0300)]
drm/i915: Improve DP downstream HPD handling
DP dongles may signal downstream HPD via short HPD pulses. Setting the
sink to DPMS off apparently kills the downstream HPD (at least on my
DP->VGA dongle), so skip the DPMS off for such dongles when we turn
off the port.
v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Pablo <pablodebiase@nanalysis.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027094523.9317-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Fri, 27 Oct 2017 13:43:48 +0000 (16:43 +0300)]
drm/i915: Fix BXT lane latency optimal setting with MST
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets
the correct lane latency optimal setting applied. And we obviously need
to compute the correct value, and read it out to keep the state checker
happy.
While at it drop the useless 'encoder' parameter to
bxt_ddi_phy_calc_lane_lat_optim_mask()
Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
which looks like the slab containing the radixtree iter was freed as we
traversed the tree, taking the rcu read lock across the loop should
prevent that (deferring all the frees until the end).
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: 96d776345277 ("drm/i915: Use a radixtree for random access to the object's backing storage") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Chris Wilson [Fri, 27 Oct 2017 09:43:11 +0000 (10:43 +0100)]
drm/i915: Empty the ring before disabling
An interesting snippet from Sandybridge's prm:
"Although a Ring Buffer can be enabled in the non-empty state, it must
not be disabled unless it is empty. Attempting to disable a Ring Buffer
in the non-empty state is UNDEFINED."
Let's avoid the undefined behaviour as we disable the rings prior to
reset and resume.
v2: Tell HEAD to catch up to TAIL (empty ring) first, then reset both to
0 (supposedly while stopped).
Jani Nikula [Thu, 26 Oct 2017 14:29:31 +0000 (17:29 +0300)]
drm/i915/edp: read edp display control registers unconditionally
Per my reading of the eDP spec, DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
DP_EDP_CONFIGURATION_CAP should be set if the eDP display control
registers starting at offset DP_EDP_DPCD_REV are "enabled". Currently we
check the bit before reading the registers, and DP_EDP_DPCD_REV is the
only way to detect eDP revision.
Turns out there are (likely buggy) displays that require eDP 1.4+
features, such as supported link rates and link rate select, but do not
have the bit set. Read the display control registers
unconditionally. They are supposed to read zero anyway if they are not
supported, so there should be no harm in this.
This fixes the referenced bug by enabling the eDP version check, and
thus reading of the supported link rates. The panel in question has 0 in
DP_MAX_LINK_RATE which is only supported in eDP 1.4+. Without the
supported link rates method we default to RBR which is insufficient for
the panel native mode. As a curiosity, the panel also has a bogus value
of 0x12 in DP_EDP_DPCD_REV, but that passes our check for >= DP_EDP_14
(which is 0x03).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103400 Reported-and-tested-by: Nicolas P. <issun.artiste@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026142932.17737-1-jani.nikula@intel.com
The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.
When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.
Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com
[mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself] Cc: stable@vger.kernel.org #v4.8+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373
drm/i915: Do not rely on wm preservation for ILK watermarks
The original intent was to preserve watermarks as much as possible
in intel_pipe_wm.raw_wm, and put the validated ones in intel_pipe_wm.wm.
It seems this approach is insufficient and we don't always preserve
the raw watermarks, so just use the atomic iterator we're already using
to get a const pointer to all bound planes on the crtc.
Manasi Navare [Thu, 26 Oct 2017 21:52:00 +0000 (14:52 -0700)]
drm/i915: Cancel the modeset retry work during modeset cleanup
During modeset cleanup on driver unload we may have a pending
hotplug work. This needs to be canceled early during the teardown
so that it does not fire after we have freed the connector.
We do this after drm_kms_helper_poll_fini(dev) since this might
trigger modeset retry work due to link retrain and before
intel_fbdev_fini() since this work requires the lock from fbdev.
v2:
* Rename it to intel_hpd_poll_fini() and call drm_kms_helper_fini() inside it
as the first step before cancel work (Chris Wilson)
* Add GPF trace in commit message and make the function static (Maarten Lankhorst)
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 9301397a63b3 ("drm/i915: Implement Link Rate fallback on Link training failure") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tony Cheng <tony.cheng@amd.com> Cc: Harry Wentland <Harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1509054720-25325-1-git-send-email-manasi.d.navare@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 24 Oct 2017 18:15:47 +0000 (19:15 +0100)]
drm/i915: Add -Wall -Wextra to our build, set warnings to full
Recently W=1 on gcc-7.2 (-Wunused-const-variable) caught a regression
that had been lurking for 6 months, so lets try enabling the full set of
warnings for CI builds. This means more patches will be rejected early
that contain trivial and sometimes not so trivial bugs. However, our
code does not yet compile cleanly with W=1, so we have to apply a filter
to the set of warnings until we can eliminate the mistakes. It also
means that developers will have to be running the full gamut of gcc to
ensure that as warnings come and go with gcc updates, we have the CI
build prepared.
v2: Use fine-grained -Wno overrides. Inside the makefile, we can
specify CFLAGS on a per-object level, which allows us to limit the scope
of any particular warning override.
v3: Place per-file overrides after the main enabling block.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024181547.27889-1-chris@chris-wilson.co.uk Acked-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Thu, 26 Oct 2017 11:50:48 +0000 (12:50 +0100)]
drm/i915: Include RING_MODE when dumping the engine state
Knowing the RING_MODE flags is useful for checking the state of the
engine, such as whether the CS is idle after trying to stop the engines
before reset.
Michał Winiarski [Thu, 26 Oct 2017 13:35:58 +0000 (15:35 +0200)]
drm/i915/guc: Preemption! With GuC
Pretty similar to what we have on execlists.
We're reusing most of the GEM code, however, due to GuC quirks we need a
couple of extra bits.
Preemption is implemented as GuC action, and actions can be pretty slow.
Because of that, we're using a mutex to serialize them. Since we're
requesting preemption from the tasklet, the task of creating a workitem
and wrapping it in GuC action is delegated to a worker.
To distinguish that preemption has finished, we're using additional
piece of HWSP, and since we're not getting context switch interrupts,
we're also adding a user interrupt.
The fact that our special preempt context has completed unfortunately
doesn't mean that we're ready to submit new work. We also need to wait
for GuC to finish its own processing.
v2: Don't compile out the wait for GuC, handle workqueue flush on reset,
no need for ordered workqueue, put on a reviewer hat when looking at my own
patches (Chris)
Move struct work around in intel_guc, move user interruput outside of
conditional (Michał)
Keep ring around rather than chase though intel_context
v3: Extract WA for flushing ggtt writes to a helper (Chris)
Keep work_struct in intel_guc rather than engine (Michał)
Use ordered workqueue for inject_preempt worker to avoid GuC quirks.
v4: Drop now unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE (Daniele)
Drop stray newlines, use container_of for intel_guc in worker,
check for presence of workqueue when flushing it, rather than
enable_guc_submission modparam, reorder preempt postprocessing (Chris)
v5: Make wq NULL after destroying it
v6: Swap struct guc_preempt_work members (Michał)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171026133558.19580-1-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:18 +0000 (22:00 +0200)]
drm/i915: Rename helpers used for unwinding, use macro for can_preempt
We would also like to make use of execlist_cancel_port_requests and
unwind_incomplete_requests in GuC preemption backend.
Let's rename the functions to use the correct prefixes, so that we can
simply add the declarations in the following patch.
Similar thing for applies for can_preempt, except we're introducing
HAS_LOGICAL_RING_PREEMPTION macro instad, converting other users that
were previously touching device info directly.
v2: s/intel_engine/execlists and pass execlists to unwind (Chris)
v3: use locked version for exporting, drop const qual (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-11-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:17 +0000 (22:00 +0200)]
drm/i915/guc: Keep request->priority for its lifetime
We also want to support preemption with GuC submission backend.
In order to do that, we need to remember the priority, like we do on
execlists path.
v2: Remove completed prio == INT_MAX optimization
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-10-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:16 +0000 (22:00 +0200)]
drm/i915: Add information needed to track engine preempt state
We shouldn't inspect ELSP context status (or any other bits depending on
specific submission backend) when using GuC submission.
Let's use another piece of HWSP for preempt context, to write its bit of
information, meaning that preemption has finished, and hardware is now
idle.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-9-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:15 +0000 (22:00 +0200)]
drm/i915: Extract "emit write" part of emit breadcrumb functions
Let's separate the "emit" part from touching any internal structures,
this way we can have a generic "emit coherent GGTT write" function.
We would like to reuse this functionality for emitting HWSP write, to
confirm that preempt-to-idle has finished.
v2: Reorder args to match emit_pipe_control, s/render/rcs (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-8-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:14 +0000 (22:00 +0200)]
drm/i915/guc: Split guc_wq_item_append
We're using a special preempt context for HW to preempt into. We don't
want to emit any requests there, but we still need to wrap this context
into a valid GuC work item.
Let's cleanup the functions operating on GuC work items.
We can extract guc_request_add - responsible for adding GuC work item and
ringing the doorbell, and guc_wq_item_append - used by the function
above, not tied to the concept of gem request.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-7-michal.winiarski@intel.com
Dave Gordon [Thu, 26 Oct 2017 14:17:37 +0000 (16:17 +0200)]
drm/i915/guc: Add a second client, to be used for preemption
This second client is created with priority KMD_HIGH, and marked
as preemptive. This will allow us to request preemption using GuC actions.
v2: Extract clients creation into a helper, debugfs fixups. (Michał)
Recreate doorbell on init. (Daniele)
Move clients into an array.
v3: And move clients back from an array, to get rid of the enum (Michał)
v4: Use is_high_priority, move DRM_ERROR into __create_doorbell, move
GEM_BUG_ON inside guc_clients_create (Michał)
v5: Split the BUG_ON (Michał)
v6: Cleanup after error during doorbell reinit (Michał)
Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171026141737.31656-1-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:12 +0000 (22:00 +0200)]
drm/i915/guc: Add preemption action to GuC firmware interface
We're using GuC action to request preemption. However, after requesting
preemption we need to wait for GuC to finish its own post-processing
before we start submitting our requests. Firmware is using shared
context to report its status.
Let's update GuC firmware interface with those new definitions.
v2: Drop unused INTEL_GUC_PREEMPT_OPTION_IMMEDIATE
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-5-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:11 +0000 (22:00 +0200)]
drm/i915/guc: Allocate separate shared data object for GuC communication
We were using first page of kernel context render state for sharing data
with GuC. While it's justified by the fact that those pages are not used
(note, GuC still enforces this layout and refuses to work if we remove
the extra page in front), it's also confusing (why are we using this
particular page?). Let's allocate a separate object instead.
v2: Drop kernel_context from GuC suspend/resume action handlers (Michel)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-4-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:10 +0000 (22:00 +0200)]
drm/i915/guc: Extract GuC stage desc pool creation into a helper
Since it's a two-step process, we can have a cleaner error handling in
the caller if we do the allocations in a helper.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-3-michal.winiarski@intel.com
Michał Winiarski [Wed, 25 Oct 2017 20:00:09 +0000 (22:00 +0200)]
drm/i915/guc: Do not use 0 for GuC doorbell cookie
Apparently, this value is reserved and may be interpreted as changing
doorbell ownership. Even though we're not observing any side effects
now, let's skip over it to be consistent with the spec.
v2: Apply checkpatch (Sagar)
Suggested-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-2-michal.winiarski@intel.com
Rodrigo Vivi [Thu, 26 Oct 2017 00:15:46 +0000 (17:15 -0700)]
drm/i915/cnl: Fix SSEU Device Status.
CNL adds an extra register for slice/subslice information.
Although no SKU is planed with an extra slice let's already
handle this extra piece of information so we don't have the
risk in future of getting a part that might have chosen this
part of the die instead of other slices or anything like that.
Also if subslice is disabled the information of eu ack for that
is garbage, so let's skip checks for eu if subslice is disabled
as we skip the subslice if slice is disabled.
The rest is pretty much like gen9.
v2: Remove IS_CANNONLAKE from gen9 status function.
v3: Consider s_max = 6 and ss_max=4 to run over all possible
slices and subslices possible by spec. Although no real
hardware will have that many slices/subslices.
To match with sseu info init.
v4: Fix offset calculation for slices 4 and 5.
Removed Oscar's rv-b since this change also needs review.
v5: Let's consider only valid bits for SLICE*_PGCTL_ACK.
This looks like wrong in Spec, but seems to be enough
for now. Whenever Spec gets updated and fixed we come
back and properly update the masks. Also add a FIXME,
so we can revisit this later when we find some strange
info on debugfs or when we noitce spec got updated.
Michał Winiarski [Wed, 25 Oct 2017 17:25:19 +0000 (18:25 +0100)]
drm/i915/guc: Initialize GuC before restarting engines
Now that we're handling request resubmission the same way as regular
submission (from the tasklet), we can move GuC initialization earlier,
before restarting the engines. This way, we're no longer being in the
state of flux during engine restart - we're already in user requested
submission mode.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025172519.10670-5-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Wed, 25 Oct 2017 14:39:42 +0000 (15:39 +0100)]
drm/i915/guc: Always enable the breadcrumbs irq
The execlists emulation on top of the GuC (used for scheduling and
preemption) depends on the MI_USER_INTERRUPT for its notifications and
tasklet action. As we always employ the irq, there is no advantage in
ever disabling it while we are using the GuC, so allow us to arm the
breadcrumb irq when enabling GuC submission and disarm upon disabling.
The impact should be lessened by the delayed irq disabling we do (we
only disable after receiving an interrupt for which no one was wanting),
but allowing guc to explicitly manage the irq in relation to itself is
simpler and prevents an issue with losing an interrupt for preemption
as it is not coupled to an active request.
Internally, we add a reference counter (breadcrumbs.irq_enabled) as a
simple mechanism to allow GuC to keep the breadcrumb irq enabled. To
improve upon always enabling the irq while guc is selected, we need
to hook into the parking facility of intel_engines so that we only enable
the breadcrumbs while the GT is active (one step better would be to
individually park/unpark each engine).
In effect, this means that we keep the breadcrumb irq always enabled for
the entire duration the guc is busy, whereas before we would try to
switch it off whenever we idled for more than interrupt with no
associated waiters. The difference *should* be negligible in practice!
v2: Stop abusing fence signaling (and its auxiliary data structures) to
enable the breadcrumbs irqs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com>, Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>, Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-3-chris@chris-wilson.co.uk
Chris Wilson [Wed, 25 Oct 2017 14:39:41 +0000 (15:39 +0100)]
drm/i915: Add a hook for making the engines idle (parking) and unparking
In the next patch, we will want to install a callback when the engines
(GT as a whole) become idle and similarly when they first become busy.
To enable that callback, first rename intel_engines_mark_idle() to
intel_engines_park() and provide the companion intel_engines_unpark().
Joonas Lahtinen [Mon, 23 Oct 2017 15:32:09 +0000 (18:32 +0300)]
drm/i915: Disable lazy PPGTT page table optimization for vGPU
When running under virtualization (vGPU active), we must disable
the lazy PPGTT page table initialization optimization introduced by
commit 14826673247e ("drm/i915: Only initialize partially filled
pagetables").
We must do this because GVT-g makes unduly assumptions about guest
behaviour, which this optimization breaks. This results in following
looking errors in the host:
ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1
The real fix is to not to depend on i915 driver behaviour, but instead
either rely on only the contracts that i915 has with the hardware, or
add some paravirtualization. While the real fix is en route, it won't
be finished in time for 4.15, so the best option is to disable the
optimization for now when vGPU is active to avoid breaking 4.15 guests
in existing VM environments.
Fixes: 14826673247e ("drm/i915: Only initialize partially filled pagetables") Suggested-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
[Joonas: Rewrote the commit message and added tags.] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com
In file included from drivers/gpu/drm/i915/i915_sw_fence.c:517:0:
drivers/gpu/drm/i915/selftests/lib_sw_fence.c: In function ‘timed_fence_init’:
drivers/gpu/drm/i915/selftests/lib_sw_fence.c:63:2: error: implicit declaration of function ‘timer_setup_on_stack’; did you mean ‘hrtimer_init_on_stack’? [-Werror=implicit-function-declaration]
timer_setup_on_stack(&tf->timer, timed_fence_wake, 0);
Kees Cook [Tue, 24 Oct 2017 15:13:44 +0000 (08:13 -0700)]
drm/i915/selftests: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151344.GA104417@beast Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Chris Wilson [Tue, 24 Oct 2017 22:08:55 +0000 (23:08 +0100)]
drm/i915: Use same test for eviction and submitting kernel context
During evict, we wish to idle the GPU if we see that the GGTT is full.
However, our test for idle in i915_gem_evict_something() and in
i915_gem_switch_to_kernel_context() do not match leading to
disappointment - we never believe that we are idle and keep trying to
flush the GGTT ad infinitum.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103438 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024220855.30155-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Tue, 24 Oct 2017 22:08:54 +0000 (23:08 +0100)]
drm/i915/selftests: Don't try to queue a request with zero delay
Instead of trying to create a timer with zero delay (i.e. with expires
set to the current jiffies and not the future, an already expired
timer), execute that request immediately.
v2: Refactor list_del_init+signal into its own little function.
v3: Reorder testing so as not to immediately signal a delayed request.
Chris Wilson [Tue, 24 Oct 2017 20:50:53 +0000 (21:50 +0100)]
drm/i915: Call cond_resched() before repeating i915_gem_evict_something()
Insert a breakpoint, a chance to escape back to the scheduler and run
something else for a bit, if we find that the GGTT is full and needs to
be idled in order to make some room. In practice, this should only be an
issue in stress tests as the wait itself will normally give the chance
for the scheduler to intervene and make progress.
Ville Syrjälä [Tue, 24 Oct 2017 09:52:16 +0000 (12:52 +0300)]
drm/i915: Perform a central cdclk state sanity check
WARN if the cdclk state doesn't match what we expect after programming.
And let's remove the WARN from bdw_set_cdclk() that's trying to achieve
the same thing in a more limite fashion.
Also take the opportunity to refactor the code to use a common function
for dumping out a cdclk state.
Ville Syrjälä [Tue, 24 Oct 2017 09:52:14 +0000 (12:52 +0300)]
drm/i915: Adjust system agent voltage on CNL if required by DDI ports
On CNL we may need to bump up the system agent voltage not only due
to CDCLK but also when driving DDI port with a sufficiently high clock.
To that end start tracking the minimum acceptable voltage for each crtc.
We do the tracking via crtcs because we don't have any kind of encoder
state. Also there's no downside to doing it this way, and it matches how
we track cdclk requirements on account of pixel rate.
v2: Allow disabled crtcs to use the min voltage
Add IS_CNL check to intel_ddi_compute_min_voltage() since
we're using CNL specific values there
s/intel_compute_min_voltage/cnl_compute_min_voltage/ since
the function makes hw specific assumptions about the voltage
values
v3: Drop the test hack leftovers from skl_modeset_calc_cdclk()
v4: s/voltage/voltage_level/ (Rodrigo)
Replace DPLL DVFS FIXMEs with an explanation why we don't
do anything there (Rodrigo)
Ville Syrjälä [Tue, 24 Oct 2017 09:52:13 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on CNL
Track the system agent voltage we request from pcode in the cdclk state
on CNL. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
Ville Syrjälä [Tue, 24 Oct 2017 09:52:12 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on BXT/GLK
Track the system agent voltage we request from pcode in the cdclk state
on BXT/GLK. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
Ville Syrjälä [Tue, 24 Oct 2017 09:52:11 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on SKL/KBL/CFL
Track the system agent voltage we request from pcode in the cdclk state
on SKL/KBL/CFL. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
Ville Syrjälä [Tue, 24 Oct 2017 09:52:10 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on BDW
Track the system agent voltage we request from pcode in the cdclk state
on BDW. Annoyingly we can't actually read out the current value since
there's no pcode command to do that, so we'll have to just assume that
it worked.
v2: Keep the WARN_ON (Rodrigo)
v3: s/voltage/voltage_level/ (Rodrigo)
Ville Syrjälä [Tue, 24 Oct 2017 09:52:09 +0000 (12:52 +0300)]
drm/i915: Use cdclk_state->voltage on VLV/CHV
Store the punit DSPFREQUAR value into cdclk_state->voltage on
VLV/CHV. Since we can actually read that out from the hardware
this can give us a bit more cross checking between the hardware
and software state.
v2: Don't break waiting for cdclk change on VLV/CHV
v3: Split out the cdclk sanity check in vlv_set_cdclk() (Rodrigo)
v4: s/voltage/voltage_level/ (Rodrigo)
Ville Syrjälä [Tue, 24 Oct 2017 09:52:08 +0000 (12:52 +0300)]
drm/i915: Start tracking voltage level in the cdclk state
For CNL we'll need to start considering the port clocks when we select
the voltage level for the system agent. To that end start tracking the
voltage in the cdclk state (since that already has to adjust it).
v2: - Tune Render and Media wake rate values according to some extra
info I got from HW engineers. Value can be tuned, but for now
these are the recommended values.
- Fix typos pointed by James.
Cc: Nathan Ciobanu <nathan.d.ciobanu@intel.com> Cc: Wayne Boyer <wayne.boyer@intel.com> Cc: Joe Konno <joe.konno@linux.intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: James Ausmus <james.ausmus@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023224612.27208-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Mon, 23 Oct 2017 17:39:20 +0000 (10:39 -0700)]
drm/i915/cnl: Force DDI_A_4_LANES when needed.
As we faced in BXT, on CNL DDI_A_4_LANES is not
set as expected when system is boot with multiple
monitors connected. This result in wrong lane
setup impacting the max data rate available and
consequently blocking modeset on eDP, resulting
in a blank screen.
Most of CNL SKUs don't support DDI-E.
The only SKU that supports DDI-E is the same
that supports the full A/E split called DDI-F.
Also when DDI-F is used DDI-E cannot be used because
they share Interrupts. So DDI-E is almost useless.
Anyways let's consider this is possible and rely on
VBT for that.
This patch was initialy start by Clint, but required
many changes including full commit message. So
Credits entirely to Clint for finding this.
v2: Extract all messy conditions into a helper function
as suggested by Ville.
Along with simplification I removed the debug
message on the working case since now all conditions
are grouped.
v3: Split the conditions even more as suggested by Ville.
Get's cleaner and easier to add new cases in the
future.
Suggested-by: Clint Taylor <clinton.a.taylor@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023173920.22890-1-rodrigo.vivi@intel.com
drm/i915/perf: fix perf enable/disable ioctls with 32bits userspace
The compat callback was missing and triggered failures in 32bits
userspace when enabling/disable the perf stream. We don't require any
particular processing here as these ioctls don't take any argument.
Chris Wilson [Tue, 24 Oct 2017 11:55:01 +0000 (12:55 +0100)]
drm/i915/execlists: Remove the priority "optimisation"
Originally we set the priority to max upon inserting the request into
the execlists queue (and removing it from the scheduler lists). We could
then use the prio==INT_MAX as a shortcut within execlists_schedule() to
detect the end of the dependency chain. Since commit 1f181225f8ec
("drm/i915/execlists: Keep request->priority for its lifetime") this is
no longer true as we use the request completion as an indicator the
schedule dependency chain is complete instead. (This allows us to then
reschedule requests even when its context is in flight.) However, this
makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change
the rq->prio at the same time. As the assertion is useful, let's keep
the assertion and remove the micro-optimisation.
Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.uk Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Chris Wilson [Mon, 23 Oct 2017 21:32:36 +0000 (22:32 +0100)]
drm/i915: Filter out spurious execlists context-switch interrupts
Back in commit a4b2b01523a8 ("drm/i915: Don't mark an execlists
context-switch when idle") we noticed the presence of late
context-switch interrupts. We were able to filter those out by looking
at whether the ELSP remained active, but in commit beecec901790
("drm/i915/execlists: Preemption!") that became problematic as we now
anticipate receiving a context-switch event for preemption while ELSP
may be empty. To restore the spurious interrupt suppression, add a
counter for the expected number of pending context-switches and skip if
we do not need to handle this interrupt to make forward progress.
v2: Don't forget to switch on for preempt.
v3: Reduce the counter to a on/off boolean tracker. Declare the HW as
active when we first submit, and idle after the final completion event
(with which we confirm the HW says it is idle), and track each source
of activity separately. With a finite number of sources, it should aide
us in debugging which gets stuck.
Fixes: beecec901790 ("drm/i915/execlists: Preemption!") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Mon, 23 Oct 2017 21:32:35 +0000 (22:32 +0100)]
drm/i915: Synchronize irq before parking each engine
When we park the engine (upon idling), we kill the irq tasklet. However,
to be sure that it is not restarted by a spurious interrupt after doing so,
flush the interrupt handler before parking. As we only park the engines
when we believe the system is idle, there should not be any interrupts to
distrub us; so flushing the final in-flight interrupt should be sufficient.
(However, we are still dependent on the HW behaving in an orderly and
timely fashion, which we shall endeavour to improve upon later.)
Chris Wilson [Mon, 23 Oct 2017 21:32:34 +0000 (22:32 +0100)]
drm/i915: Bump wait-times for the final CS interrupt before parking
In the idle worker we drop the prolonged GT wakeref used to cover such
essentials as interrupt delivery. (When a CS interrupt arrives, we also
assert that the GT is awake.) However, it turns out that 10ms is not
long enough to be assured that the last CS interrupt has been delivered,
so bump that to 200ms, and move the entirety of that wait to before we
take the struct_mutex to avoid blocking. As this is now a potentially
long wait, restore the earlier behaviour of bailing out early when a new
request arrives.
v2: Break out the repeated check for new requests into its own little
helper to try and improve the self-commentary.
v2: Move defines to a better place.
This is actually CNL_PCH not CNL only.
v3: Accepting Ville's suggestions: enums and array to
to make this future proof.
v4: Protect the array access as Ville suggested.
Also accepting all Jani's suggestions:
- use already defined gmbus pin definitions.
- use map_ddc_pin for disambiguation.
- Add /* sic */ comment on inverted values
so people can easily see it it nos a mistake
we have the map 3 -> 4 and 4 -> 3 :/
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171020172641.16029-1-rodrigo.vivi@intel.com
Madhav Chauhan [Fri, 13 Oct 2017 12:45:00 +0000 (18:15 +0530)]
drm/i915: Use existing DSI backlight ports info
This patch re-use already parsed DSI backlight/cabc ports
info for saving it inside struct intel_dsi rather than
parsing it at the time of DSI initialization.
V2: Remove backlight and cabc variable initialization (Jani N).
Madhav Chauhan [Fri, 13 Oct 2017 12:44:59 +0000 (18:14 +0530)]
drm/i915: Parse DSI backlight/cabc ports.
This patch parse DSI backlight/cabc ports info from
VBT and save them inside local structure. This saved info
can be directly used while initializing DSI for different
platforms instead of parsing for each platform.
V2: Changes:
- Typo fix in commit message.
- Move up newly added port variables (Jani N)
- Remove redundant initialization (Jani N)
- Don't parse CABC ports if not supported (Jani N)
V3: Patch restructure (Suggested by Jani N)
Chris Wilson [Thu, 19 Oct 2017 06:37:33 +0000 (07:37 +0100)]
drm/i915: Skip waking the device to service pwrite
If the device is in runtime suspend, resuming takes time and reduces our
powersaving. If this was for a small write into an object, that resume
will take longer than any savings in using the indirect GGTT access to
avoid the cpu cache.
Ville Syrjälä [Wed, 18 Oct 2017 18:19:58 +0000 (21:19 +0300)]
drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
A bunch of functions are now exclusively used for HDMI, so naming the
variables with hdmi prefix/suffix is redundant. Also use int rather
than u32 for the translation level consistently.
Ville Syrjälä [Wed, 18 Oct 2017 18:19:34 +0000 (21:19 +0300)]
drm/i915: Unify error handling for missing DDI buf trans tables
Handle missing buf trans tables, or out of bounds buf trans levels
the same way everywhere. These should never be hit under normal
conditions, but let's play it safe for now.
Ville Syrjälä [Mon, 16 Oct 2017 14:57:03 +0000 (17:57 +0300)]
drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
SKL DDI B/C/D only have 9 usable buf trans registers for DP/eDP. That
matches the normal DP buf trans tables, but the low vswing eDP tables
have 10 entries. Thus the eDP tables can only be used safely with DDI A
and E.
We try to catch cases where DDI B/C/D gets used with the wrong number of
entires in some parts of the code, but not everywhere. Let's move the
code to deal with that deeper into intel_ddi_get_buf_trans_edp(). And
for sake of symmetry do the same in intel_ddi_get_buf_trans_dp(). That
would also avoid explosions in the rather unlikely case that the DP
tables would get revised to 10 entries as well.
Ville Syrjälä [Mon, 16 Oct 2017 14:57:02 +0000 (17:57 +0300)]
drm/i915: Kill off the BXT buf_trans default_index
default_index contained in the BXT buf_trans tables is actually useless.
For DP we should always have a valid level selected (otherwise the link
training logic would be buggy), and for HDMI we can just do what the
other platforms do and pick the correct entry in intel_ddi_hdmi_level().
We'll want to use the intel_ddi_get_buf_trans_*() functions a bit
earlier in the file, so move them up. While at it start using them
in the iboost setup to get rid of the platform checks there.
Chris Wilson [Wed, 18 Oct 2017 12:16:21 +0000 (13:16 +0100)]
drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
After being requested to idle the GPU, flush the idle worker to drop the
residual active state, and any internal object caches.
v2: By popular demand, introduce DROP_IDLE for fine-grained control from
userspace, though it should be used as part of a
DROP_ACTIVE | DROP_RETIRE | DROP_IDLE | DROP_FREED
sequence.
v3: Convert to BIT() to sell it to Joonas.
drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
This is to use clipped y coordinate here. I left get_crtc_fence_y_offset()
function itself in place as oneliner to maintain comment above it why this
is done.
projects / mirror_ubuntu-disco-kernel.git / log