Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.
Fixes: 91d2e9b56cf5 ("NFSD: Clean up the nfsd_net::nfssvc_boot field") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Most of the time, NFSv4 clients issue a COMMIT before the final CLOSE of
an open stateid, so with NFSv4, the fsync in the nfsd_file_free path is
usually a no-op and doesn't block.
We have a customer running knfsd over very slow storage (XFS over Ceph
RBD). They were using the "async" export option because performance was
more important than data integrity for this application. That export
option turns NFSv4 COMMIT calls into no-ops. Due to the fsync in this
codepath however, their final CLOSE calls would still stall (since a
CLOSE effectively became a COMMIT).
I think this fsync is not strictly necessary. We only use that result to
reset the write verifier. Instead of fsync'ing all of the data when we
free an nfsd_file, we can just check for writeback errors when one is
acquired and when it is freed.
If the client never comes back, then it'll never see the error anyway
and there is no point in resetting it. If an error occurs after the
nfsd_file is removed from the cache but before the inode is evicted,
then it will reset the write verifier on the next nfsd_file_acquire,
(since there will be an unseen error).
The only exception here is if something else opens and fsyncs the file
during that window. Given that local applications work with this
limitation today, I don't see that as an issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2166658 Fixes: ac3a2585f018 ("nfsd: rework refcounting in filecache") Reported-and-tested-by: Pierguido Lambri <plambri@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The nested if statements here make no sense, as you can never reach
"else" branch in the nested statement. Fix the error handling for
when there is a courtesy client that holds a conflicting deny mode.
Fixes: 3d6942715180 ("NFSD: add support for share reservation conflict to courteous server") Reported-by: 張智諺 <cc85nod@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When nfsd4_copy fails to allocate memory for async_copy->cp_src, or
nfs4_init_copy_state fails, it calls cleanup_async_copy to do the
cleanup for the async_copy which causes page fault since async_copy
is not yet initialized.
This patche rearranges the order of initializing the fields in
async_copy and adds checks in cleanup_async_copy to skip un-initialized
fields.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Fixes: 87689df69491 ("NFSD: Shrink size of struct nfsd4_copy") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op.
Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 81e722978ad2 ("NFSD: fix problems with cleanup on errors in nfsd4_copy") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.
Move the check for ls_layouts before setting ls_recalled.
Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The reference count of nfsd4_ssc_umount_item is not decremented
on error conditions. This prevents the laundromat from unmounting
the vfsmount of the source file.
This patch decrements the reference count of nfsd4_ssc_umount_item
on error.
Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Currently nfsd4_setup_inter_ssc returns the vfsmount of the source
server's export when the mount completes. After the copy is done
nfsd4_cleanup_inter_ssc is called with the vfsmount of the source
server and it searches nfsd_ssc_mount_list for a matching entry
to do the clean up.
The problems with this approach are (1) the need to search the
nfsd_ssc_mount_list and (2) the code has to handle the case where
the matching entry is not found which looks ugly.
The enhancement is instead of nfsd4_setup_inter_ssc returning the
vfsmount, it returns the nfsd4_ssc_umount_item which has the
vfsmount embedded in it. When nfsd4_cleanup_inter_ssc is called
it's passed with the nfsd4_ssc_umount_item directly to do the
clean up so no searching is needed and there is no need to handle
the 'not found' case.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: adjusted whitespace and variable/function names ] Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Stable-dep-of: 34e8f9ec4c9a ("NFSD: fix leaked reference count of nfsd4_ssc_umount_item") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.
Discovered while auditing locking to write the Rust abstractions.
Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects") Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages") Signed-off-by: Asahi Lina <lina@asahilina.net> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net
(cherry picked from commit aa8c85affe3facd3842c8912186623415931cc72) Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Commit 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for
AMD") caused only AMD gpu's with PX to have their audio component register
with vga_switcheroo. This meant that Apple Macbooks with apple-gmux as the
gpu switcher no longer had the audio client registering, so when the gpu is
powered off by vga_switcheroo snd_hda_intel is unaware that it should have
suspended the device:
amdgpu: switched off
snd_hda_intel 0000:03:00.1:
Unable to change power state from D3hot to D0, device inaccessible
snd_hda_intel 0000:03:00.1: CORB reset timeout#2, CORBRP = 65535
To resolve this, we use apple_gmux_detect() and register a
vga_switcheroo audio client when apple-gmux is detected.
bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.
Fixes: 256a90ed9e46 ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Use spinlocks to deal with workers introducing a wrapper
bigben_schedule_work(), and several spinlock checks.
Otherwise, bigben_set_led() may schedule bigben->worker after the
structure has been freed, causing a use-after-free.
Fixes: 4eb1b01de5b9 ("HID: hid-bigbenff: fix race condition for scheduled work during removal") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-3-7860c5763c38@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
bigben_worker() checks report_field to be non-NULL.
The check has been added in commit 918aa1ef104d ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit c7bf714f8755 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.
Fixes: 918aa1ef104d ("HID: bigbenff: prevent null pointer dereference") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-2-7860c5763c38@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: 078a85f2806f ("ASoC: dapm: Only power up active channels from a DAI") Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
wait_for_completion_timeout() never returns a <0 value. It returns either
on timeout or a positive value (at least 1, or number of jiffies left
till timeout)
So, fix the error handling path and return -ETIMEDOUT should a timeout
occur.
Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/c2040bf3cfa201fd8890cfab14fa5a701ffeca14.1676466072.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Register 0x9424 is not replicated on any platform, so it shouldn't be
declared with REG_MCR(). Declaring it with _MMIO() is basically
duplicate of the GEN7 version, so just remove the GEN8 and change all
the callers to use the right functions.
Old versions of the gen8 bspec page used to contain a table with MCR
registers, apparently implying 0x9400 - 0x94ff registers were
replicated. However that table went away and there is no information
related to the ranges for gen8 anymore. Moreover the current behavior of
the driver wouldn't do anything special for 0x9424 since there is no
equivalent table in intel_gt_mcr.c: the driver would just fallback to
intel_uncore_{read,write}(). Therefore, do not care about the possible
special case for gen8 and just use the register as non-MCR for all the
platforms.
One place doing read + write is also converted to intel_uncore_rmw().
v2: Reword commit message adding the justification wrt gen8
Fixes: a9e69428b1b4 ("drm/i915: Define MCR registers explicitly") Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230206165410.3056073-1-lucas.demarchi@intel.com
(cherry picked from commit 869bace73ae2b4227e57ee3fd994bfa7d4808938) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
XEHPC_LNCFMISCCFGREG0 and XEHPC_L3SCRUB are both in MCR register ranges
on PVC (with HALFBSLICE and L3BANK replication respectively), so they
should be explicitly declared as MCR registers and use MCR-aware
workaround handlers.
The workarounds/tuning settings should still be applied properly on PVC
even without the MCR annotation, but readback verification on
CONFIG_DRM_I915_DEBUG_GEM builds could potentitally give false positive
"workaround lost on load" warnings on parts fused such that a unicast
read targets a terminated register instance.
As per the performance tuning guide, set the HOSTCACHEEN bit to
implement the recommended caching policy on PVC.
Signed-off-by: Wayne Boyer <wayne.boyer@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221130170723.2460014-1-wayne.boyer@intel.com
Stable-dep-of: effc0905d741 ("drm/i915/pvc: Annotate two more workaround/tuning registers as MCR") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When swap is activated to a file on an NFSv4 mount we arrange that the
state manager thread is always present as starting a new thread requires
memory allocations that might block waiting for swap.
Unfortunately the code for allowing the state manager thread to exit when
swap is disabled was not tested properly and does not work.
This can be seen by examining /proc/fs/nfsfs/servers after disabling swap
and unmounting the filesystem. The servers file will still list one
entry. Also a "ps" listing will show the state manager thread is still
present.
There are two problems.
1/ rpc_clnt_swap_deactivate() doesn't walk up the ->cl_parent list to
find the primary client on which the state manager runs.
2/ The thread is not woken up properly and it immediately goes back to
sleep without checking whether it is really needed. Using
nfs4_schedule_state_manager() ensures a proper wake-up.
Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").
Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().
Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal") Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.
The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.
This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).
In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.
Fixes: d5214321498a ("ASoC: tlv320adcx140: Add support for configuring GPIO pin") Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de> Signed-off-by: Alexandru Ardelean <alex@shruggie.ro> Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.
Add check for fan fault prior return speed value and return zero if
fault is detected.
Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.
This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.
Fixes: 142168eba9dc ("spi: bcm63xx-hsspi: add bcm63xx HSSPI driver") Signed-off-by: William Zhang <william.zhang@broadcom.com> Link: https://lore.kernel.org/r/20230209200246.141520-11-william.zhang@broadcom.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
HID++ 1.0 devices only export whether Fast Scrolling is enabled, not
whether they are capable of it. Reinstate the original quirks for the 3
supported mice so fast scrolling works again on those devices.
As made mention of in commit 4ea7fc09539b ("drm/amd/display: Do not
program interrupt status on disabled crtc"), we shouldn't program
disabled crtcs. So, filter out disabled crtcs in dm_set_vupdate_irq()
and dm_set_vblank().
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Fixes: 589d2739332d ("drm/amd/display: Use crtc enable/disable_vblank hooks") Fixes: d2574c33bb71 ("drm/amd/display: In VRR mode, do DRM core vblank handling at end of vblank. (v2)") Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
For some reason we ended up with incorrect mclk rate which should be 1920000 instead of 96000, So far we were getting lucky as the same clk
is set to 192000 by wsa and va macro. This issue is discovered when there
is no wsa macro active and only rx or tx path is tested.
Fix this by setting correct rate.
Fixes: c39667ddcfc5 ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro") Fixes: af3d54b99764 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230209122806.18923-7-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
At the moment, playing audio with PulseAudio with the qdsp6 driver
results in distorted sound. It seems like its timer-based scheduling
does not work properly with qdsp6 since setting tsched=0 in
the PulseAudio configuration avoids the issue.
Apparently this happens when the pointer() callback is not accurate
enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop
PulseAudio from using timer-based scheduling by default.
According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html:
The flag is being used in the sense explained in the previous audio
meeting -- the data transfer granularity isn't fine enough but aligned
to the period size (or less).
In certain circumstances, such as when creating I2C-connected HID
devices, we want to pass and retain some quirks (axis inversion, etc).
The source of such quirks may be device tree, or DMI data, or something
else not readily available to the HID core itself and therefore cannot
be reconstructed easily. To allow this, introduce "initial_quirks" field
in hid_device structure and use it when determining the final set of
quirks.
This fixes the problem with i2c-hid setting up device-tree sourced
quirks too late and losing them on device rebind, and also allows to
sever the tie between hid-code and i2c-hid when applying DMI-based
quirks.
Fixes: b60d3c803d76 ("HID: i2c-hid-of: Expose the touchscreen-inverted properties") Fixes: a2f416bf062a ("HID: multitouch: Add quirks for flipped axes") Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/Y+LYwu3Zs13hdVDy@google.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Certain touchscreen devices, such as the ELAN9034, are oriented
incorrectly and report touches on opposite points on the X and Y axes.
For example, a 100x200 screen touched at (10,20) would report (90, 180)
and vice versa.
This is fixed by adding device quirks to transform the touch points
into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y.
Signed-off-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 03a86105556e ("HID: retain initial quirks set up when creating HID devices") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Some motherboards have multiple HDA codecs connected to the serial bus.
The current code may create multiple mixer controls with the almost
identical identification.
The current code use id.device field from the control element structure
to store the codec address to avoid such clashes for multiple codecs.
Unfortunately, the user space do not handle this correctly. For mixer
controls, only name and index are used for the identifiers.
This patch fixes this problem to compose the index using the codec
address as an offset in case, when the control already exists. It is
really unlikely that one codec will create 10 similar controls.
This patch adds new kernel module parameter 'ctl_dev_id' to allow
select the old behaviour, too. The CONFIG_SND_HDA_CTL_DEV_ID Kconfig
option sets the default value.
Due to wrong interpretation of the specification,
custom implementation was used instead of standard regmap helper. LINK: https://lore.kernel.org/all/c2014039-f1e8-6976-33d6-52e2dd4e7b66@baylibre.com/ Fixes: c12ac5fc3e0a ("regulator: drivers: Add TI TPS65219 PMIC regulators support")
Regulator does NOT require to be off to be switched to bypass mode.
Signed-off-by: Jerome Neanne <jneanne@baylibre.com> Link: https://lore.kernel.org/r/20230203140119.13029-1-jneanne@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
mr |= SPDIFRX_MR_ENDIAN_BIG;
^~
../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
u32 mr;
^
= 0
1 error generated.
Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.
commit 1f9c82b5ab83ff2 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.
Fixes: 1f9c82b5ab83 ("ASoC: rsnd: add debugfs support") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
At the moment, accel drivers can be built-in even with CONFIG_DRM=m,
but this causes a link failure:
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_dev_init':
ivpu_drv.c:(.text+0x1535): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: ivpu_drv.c:(.text+0x1562): undefined reference to `drmm_kmalloc'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_remove':
ivpu_drv.c:(.text+0x1faa): undefined reference to `drm_dev_unregister'
x86_64-linux-ld: drivers/accel/ivpu/ivpu_drv.o: in function `ivpu_probe':
ivpu_drv.c:(.text+0x1fef): undefined reference to `__devm_drm_dev_alloc'
The problem is that DRM_ACCEL is a 'bool' symbol, so driver that
only depend on DRM_ACCEL but not also on DRM do not see the restriction
to =m configs.
To ensure that each accel driver has an implied dependency on CONFIG_DRM,
enclose the entire Kconfig file in an if/endif check.
Fixes: 8bf4889762a8 ("drivers/accel: define kconfig and register a new major") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127221504.2522909-1-arnd@kernel.org
(cherry picked from commit 3524c96a121952f214271622bb372661ced86101) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
reg_base and reg_downshift currently don't have any effect if used with
a regmap_bus or regmap_config which only offers single register
operations (ie. reg_read, reg_write and optionally reg_update_bits).
Fix that and take them into account also for regmap_bus with only
reg_read and read_write operations by applying reg_base and
reg_downshift in _regmap_bus_reg_write, _regmap_bus_reg_read.
Also apply reg_base and reg_downshift in _regmap_update_bits, but only
in case the operation is carried out with a reg_update_bits call
defined in either regmap_bus or regmap_config.
Fixes: 0074f3f2b1e43d ("regmap: allow a defined reg_base to be added to every address") Fixes: 86fc59ef818beb ("regmap: add configurable downshift for addresses") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/Y9clyVS3tQEHlUhA@makrotopia.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.
Issues identified:
- reinit_completion() may be called while waiting for completion
which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
will signal only one waiting thread per interrupt which may lead to
timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
ISR may disable interrupt for threads that were just enabled it.
To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.
To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.
The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.
As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).
The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.
Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
By convention platform_data refers to structures passed to drivers by
code that registers devices. When talking about model-specific data
structures associated with OF compatibles, we usually call them chip_data.
In order to avoid confusion rename all mentions of platform_data to
chip_data.
The mt8186-disp-ccorr is not fully compatible with the mt8183-disp-ccorr
implementation. It causes a crash when system resumes if it binds to the
device.
We should use mt8192-disp-ccorr as fallback of mt8186-disp-ccorr.
commit d3268a40d4b19f ("ASoC: soc-compress.c: fix NULL dereference")
enables DPCM capture, but it should independent from playback.
This patch fixup it.
mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Use NULL for NULL pointer to fix the following sparse warning:
drivers/gpu/drm/mediatek/mtk_drm_gem.c:265:27: sparse: warning: Using plain integer as NULL pointer
Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230111024443.24559-1-miles.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
According to Figure 16 Turnaround Procedure on page 36 in [1], you
can see the status of LP-00 -> LP10 -> LP11. This state can correspond
to the state of DSI from LP00 -> LP11 in mtk_dsi_lane_ready function
in mtk_dsi.c.
LP-00 -> LP10 -> LP11 takes about 2*TLPX time (refer to [1] page 51
to see that TLPX is 50ns)
The delay at the end of the mtk_dsi_lane_ready function should be
greater than the 2*TLPX specified by the DSI spec, and less than
the time specified by the DSI_RX (generally 6ms to 40ms), to avoid
problems caused by the RX specification
[1]:mipi_D-PHY_specification_v1-1
Fixes: 39e8d062b03c ("drm/mediatek: Keep dsi as LP00 before dcs cmds transfer") Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/1673330093-6771-2-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The function dpu_plane_sspp_atomic_update() updates pdpu->is_rt_pipe
flag, but after the commit 854f6f1c653b ("drm/msm/dpu: update the qos
remap only if the client type changes") it sets the flag late, after all
the qos functions have updated QoS programming. Move the flag update
back to the place where it happened before the mentioned commit to let
the pipe be programmed according to its current RT/non-RT state.
Fixes: 854f6f1c653b ("drm/msm/dpu: update the qos remap only if the client type changes") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/516239/ Link: https://lore.kernel.org/r/20221229191856.3508092-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
GAMSTLB_CTRL and GAMCNTRL_CTRL became multicast/replicated registers on
Xe_HP. They should be defined accordingly and use MCR-aware operations.
These registers have only been used for some dg2/xehpsdv workarounds, so
this fix is mostly just for consistency/future-proofing; even lacking
the MCR annotation, workarounds will always be properly applied in a
multicast manner on these platforms.
Cc: Gustavo Sousa <gustavo.sousa@intel.com> Fixes: 58bc2453ab8a ("drm/i915: Define multicast registers as a new type") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230125234159.3015385-3-matthew.d.roper@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.
Register reset characteristics (i.e., whether the register maintains or
loses its value on engine reset) is an important factor that determines
which wa_list we want to add workarounds to. We recently found out that
the bspec documentation for the Xe_HP's "GAM" registers in the 0xC800 -
0xCFFF range was misleading; these registers do not actually lose their
value on engine resets as the documentation implied. This means there's
no need to re-apply workarounds touching these registers after a reset,
and the corresponding workarounds should be moved from the 'engine'
lists back to the 'gt' list.
v2:
- Don't add Wa_18018781329 to xehpsdv; the original condition didn't
include that platform. (Gustavo)
- Move the MTL code to the GT function as-is for now; we'll take care
of the additional fixes needed in a follow-up patch.
Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.
Fixes: 1cff7440a86e ("drm/msm: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/514163/ Link: https://lore.kernel.org/r/20221206080517.43786-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The Exynos UFS controller only supports scatter/gather list elements that
are aligned on a 4 KiB boundary. Fix DMA alignment in case PAGE_SIZE !=
4096. Rename UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE into
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT.
Cc: Kiwoong Kim <kwmad.kim@samsung.com> Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
v2.5.0 support was originally added for SC7280, but this hw is also
present on SM8350, which has one more DSI host. Bump up the dsi count
and fill in the register of the secondary host to allow it to probe.
This should not have any adverse effects on SC7280, as the secondary
CTRL will only be touched if it's defined, anyway.
Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/519513/ Link: https://lore.kernel.org/r/20230120210101.2146852-1-konrad.dybcio@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331b8 ("drm/dsi: Implement DCS set/get display brightness") Signed-off-by: Daniel Mentz <danielmentz@google.com> Link: https://android.googlesource.com/kernel/msm/+/754affd62d0ee268c686c53169b1dbb7deac8550
[richard: fix 16-bit brightness_get] Signed-off-by: Richard Acayan <mailingradian@gmail.com> Tested-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Instead of having several fixed values for the pcr register, calculate
it before programming. This allows the bridge to support most of the
display modes.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The driver will reset the bridge in the atomic_pre_enable(). However
this will also drop the HPD interrupt state. Instead of resetting the
bridge, properly wake it up. This fixes the HPD interrupt delivery after
the disable/enable cycle.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
On atomic_post_disable the bridge goes to the low power state. However
the code disables too much of the chip, so the HPD event is not being
detected and delivered to the host. Reduce the power saving in order to
get the HPD event.
Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).
To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.
^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.
Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6") Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
The current CLRSIPO count is still marginal and does not work with high
DSI clock rates in burst mode. Increase it further to allow the DSI link
to work at up to 1Gbps lane speed. This returns the counts to defaults
as provided by datasheet.
Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().
When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.
Fixes: a3f7dcc9cc03 ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
drivers/scsi/qla2xxx/qla_edif_bsg.h:93:12: warning: field remote_pid
within 'struct app_pinfo_req' is less aligned than 'port_id_t' and is
usually due to 'struct app_pinfo_req' being packed, which can lead to
unaligned accesses [-Wunaligned-access]
port_id_t remote_pid;
^
2 warnings generated.
Remove u32 field in remote_pid to silence warning.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.
Check for exchange availability before command submission.
projects / mirror_ubuntu-kernels.git / log