Current code expects there to be a single thread that is responsible
for creating rstp and creating and deleting rstp_port objects. rstp
objects are also deleted from other threads, as managed by reference
counting.
rstp port objects are not reference counted, which means that
references to rstp ports may only be held while holding the rstp
mutex, or by the thread that creates and deletes them.
This patch adds reference counting to RSTP ports, which allows ports
to be passed from ofproto-dpif to ofproto-dpif-xlate without using the
RSTP port number. This simplifies RSTP port reconfiguration, as the
port need not be resynchronized with xlate if just the port number
changes. This also avoids lookups on the processing of RSTP BPDUs.
This patch also:
1. Exposes the rstp mutex so that related thread safety annotations
can be used also within rstp-state-machines.c.
2. Internal variants of most setter an getter functions are defined,
suffixed with two underscores. These are annotated to be callable
only when the mutex is held.
3. Port setters were only called in a specific pattern. The new external
port setter combines them in a single rspt_port_set() function.
dpif_netdev_execute may be called while doing upcall processing.
Since the context of the input port is not tracked upto this point, we
use the shared dp->emc_cache for packet execution, where the emc_cache
is needed for recirculation.
While recursive mutexes can make thread safety analysis hard, for now
we change emc_mutex to be recursive. Forthcoming new unit tests will
fail with the current non-recursive mutex. Later improvements may
remove the need for this recursion.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Daniele Di Proietto <ddiproietto@vmware.com>
Use the "+-" syntax more uniformly when printing masked flags, and use
the syntax of delimited 1-flags also for formatting fully masked TCP
flags.
The "+-" syntax only deals with masked flags, but if there are many of
those, the printout becomes long and confusing. Typically there are
many flags only when flags are fully masked, but even then most of
them are zeros, so it makes sense to print the flags that are set
(ones) and omit the zero flags.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Some attributes are exact matches even when all bits are not ones.
Make odp_mask_attr_is_exact() to return true if the mask is set for
all the bits we actually care about.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
lib/odp: Masked set action execution and printing.
Add a new action type OVS_ACTION_ATTR_SET_MASKED, and support for
parsing, printing, and committing them.
Masked set actions add a mask, immediately following the netlink
attribute data, within the netlink attribute itself. Thus the key
attribute size for a masked set action is exactly double of the
non-masked set action.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Alex Wang [Mon, 8 Sep 2014 17:41:36 +0000 (10:41 -0700)]
ofproto-dpif-upcall: Fix a free of uninitialized memory.
On current master, when 'upcall_receive()' returns error, the
ofpbuf 'upcall->put_actions' is uninitialized. In some usecase,
the failure of 'upcall_receive()' will cause uninitialize of
'upcall->put_actions' and free of uninitialized pointer.
This commit fixes the issue by making the caller not conduct
the uninitialize of the 'upcall' when there is error.
Found by inspection.
Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
packet execute is setting egress_tun_info in skb->cb, rather
than packet->cb. skb is netlink msg skb. This causes corruption
in netlink skb state stored in skb->cb (NETLINK_CB) which
results in following deadlock in netlink code.
=============================================
[ INFO: possible recursive locking detected ]
3.2.62 #2
---------------------------------------------
handler55/22851 is trying to acquire lock:
(genl_mutex){+.+.+.}, at: [<ffffffff81471ad7>] genl_lock+0x17/0x20
but task is already holding lock:
(genl_mutex){+.+.+.}, at: [<ffffffff81471ad7>] genl_lock+0x17/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(genl_mutex);
lock(genl_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by handler55/22851:
#0: (genl_mutex){+.+.+.}, at: [<ffffffff81471ad7>] genl_lock+0x17/0x20
When there are multiple vlan headers present in a received frame, the
first one is put into vlan_tci and protocol is set to ETH_P_8021Q.
Anything in the skb beyond the VLAN TPID may be still non-linear,
including the inner TCI and ethertype. While ovs_flow_extract takes
care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later,
if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the
next vlan header into vlan_tci.
This leads to two things:
1. Part of the resulting ethernet header is in the non-linear part of
the skb. When eth_type_trans is called later as the result of
OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also,
__pop_vlan_tci is in fact accessing random data when it reads
past the TPID.
2. network_header points into the ethernet header instead of behind it.
mac_len is set to a wrong value (10), too.
Reported-by: Yulong Pei <ypei@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com>
I have dropped second change. Since it assumes inner mac header is of
ETH_HLEN len which is not always true. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Andy Zhou [Mon, 11 Aug 2014 07:14:05 +0000 (00:14 -0700)]
datapath: Implement recirc action without recursion
Since kernel stack is limited in size, it is not wise to using
recursive function with large stack frames.
This patch provides an alternative implementation of recirc action
without using recursion.
A per CPU fixed sized, 'deferred action FIFO', is used to store either
recirc or sample actions encountered during execution of an action
list. Not executing recirc or sample action in place, but rather execute
them laster as 'deferred actions' avoids recursion.
Deferred actions are only executed after all other actions has been
executed, including the ones triggered by loopback from the kernel
network stack.
The size of the private FIFO, currently set to 20, limits the number
of total 'deferred actions' any one packet can accumulate.
Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
Alex Wang [Fri, 5 Sep 2014 06:17:32 +0000 (06:17 +0000)]
ovs-numa: Relax the ovs_numa_*() input argument check.
Many of the ovs_numa_*() functions abort the program when the
input cpu socket or core id is invalid. This commit relaxes
the input check and makes these functions return OVS_*_UNSPEC
when the check fails.
Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
Alex Wang [Fri, 5 Sep 2014 06:17:31 +0000 (06:17 +0000)]
ovs-numa: Replace name 'cpu_socket' with 'numa_node'.
'numa' and 'socket' are currently used interchangeably in ovs-numa.
But they are not always equivalent as some platform can have multiple
sockets on a numa node. To avoid confusion, this commit renames all
the 'cpu_socket' to 'numa_node'.
Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
MSVC has a '-O2' compiler optimization flag which makes code run
fast and is the recommended option for released code. For e.g.,
running "./tests/ovstest.exe test-cmap benchmark 1000000 3 1"
shows a 3x improvement for some cmap micro-benchmarks.
In the Visual Studio world, there is a concept of "release" build
(fast code, harder to debug) and a "debug" build (easier to debug).
The IDE provides this option and the IDE users expect something similar
for command line build.
So this commit, introduces a "--with-debug" configure option for Windows
and does not use '-O2' as a compiler option when specified. This can
be extended further if there are more compiler options that distinguish
a "release" build vs "debug" build.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com> Acked-by: Saurabh Shah <ssaurabh@vmware.com>
The /FS option allows serial access to PDB file creation letting
parallel builds succeed with mingw32-make (with some tricks). The
'make' that comes with MSYS has a bug that causes hangs with
parallel builds which supposedly has been fixed in the upcoming
1.0.19 release.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com> Acked-by: Saurabh Shah <ssaurabh@vmware.com>
Before this change (i.e., with pthread locks for atomics on Windows),
the benchmark for cmap and hmap was as follows:
$ ./tests/ovstest.exe test-cmap benchmark 10000000 3 1
Benchmarking with n=10000000, 3 threads, 1.00% mutations:
cmap insert: 61070 ms
cmap iterate: 2750 ms
cmap search: 14238 ms
cmap destroy: 8354 ms
hmap insert: 1701 ms
hmap iterate: 985 ms
hmap search: 3755 ms
hmap destroy: 1052 ms
After this change, the benchmark is as follows:
$ ./tests/ovstest.exe test-cmap benchmark 10000000 3 1
Benchmarking with n=10000000, 3 threads, 1.00% mutations:
cmap insert: 3666 ms
cmap iterate: 365 ms
cmap search: 2016 ms
cmap destroy: 1331 ms
hmap insert: 1495 ms
hmap iterate: 1026 ms
hmap search: 4167 ms
hmap destroy: 1046 ms
So there is clearly a big improvement for cmap.
But the correspondig test on Linux (with gcc 4.6) yeilds the following:
./tests/ovstest test-cmap benchmark 10000000 3 1
Benchmarking with n=10000000, 3 threads, 1.00% mutations:
cmap insert: 3917 ms
cmap iterate: 355 ms
cmap search: 871 ms
cmap destroy: 1158 ms
hmap insert: 1988 ms
hmap iterate: 1005 ms
hmap search: 5428 ms
hmap destroy: 980 ms
So for this particular test, except for "cmap search", Windows and
Linux have similar performance. Windows is around 2.5x slower in "cmap search"
compared to Linux. This has to be investigated.
Signed-off-by: Gurucharan Shetty <gshetty@nicira.com>
[With a lot of inputs and help from Jarno] Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com>
Nithin Raju [Fri, 29 Aug 2014 22:48:10 +0000 (15:48 -0700)]
datapath-windows: add support for GET_DP command to dump datpaths
In this patch, we add support for the GET_DP netlink command to dump
the datpaaths. The userspace workflow to get this to work is the same
as on Linux. dpif-linux.c initiates a dump start by writing a netlink
message, and after that continues to read data from the kernel while
the kernel has data. The state is maintained in the kernel, and not in
userspace. This approach was taken since there was not great benefit
of maintaining state in userspace, and also to avoid userspace changes
specific to Windows.
This hopefully serves as a template to base the other dump commands on.
validation:
- With a hacked up dpif-linux.c to work on Windows,
dpif_linux_enumerate() successfully enumerated the datapaths in the
kernel.
Signed-off-by: Nithin Raju <nithin@vmware.com> Signed-off-by: Ankur Sharma <ankursharma@vmware.com> Acked-by: Ankur Sharma <ankursharma@vmware.com> Acked-by: Saurabh Shah <ssaurabh@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
Nithin Raju [Fri, 29 Aug 2014 22:47:49 +0000 (15:47 -0700)]
datapath-windows: add a context structure for user parameters
In this patch we add a context structure for collecting all the parameters
passed from usersapce in one place. The idea is to reduce the number of
parameters being passed to the netlink command handler functions.
It can be argued that not all functions require all the arguments, but this
approach keeps the code clean, IMO.
Signed-off-by: Nithin Raju <nithin@vmware.com> Signed-off-by: Ankur Sharma <ankursharma@vmware.com> Acked-by: Ankur Sharma <ankursharma@vmware.com> Acked-by: Saurabh Shah <ssaurabh@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
Jean Tourrilhes [Thu, 21 Aug 2014 17:40:51 +0000 (10:40 -0700)]
ofp-errors: Migrate EXT-444 errors to ONF experimenter ID.
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
[blp@nicira.com removed the definitions of these errors in OF1.1 and OF1.2] Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Ben Pfaff [Thu, 21 Aug 2014 17:38:15 +0000 (10:38 -0700)]
ofp-errors: Fix bugs in treatment of OpenFlow experimenter errors.
OpenFlow 1.2 and later have "experimenter errors". The OVS implementation
was buggy in a few ways. First, a bug in extract-ofp-errors prevented
OF1.2+ experimenter errors from being properly decoded. Second,
OF1.2+ experimenter errors have only a type, not a code, whereas all other
types of errors (standard errors, OF1.0/1.1 Nicira extension errors) have
both, but extract-ofp-errors didn't properly enforce that.
This commit fixes both problems and improves existing tests to verify that
encoding and decoding of experimenter errors now works properly.
This commit also fixes the definition of OFPBIC_DUP_INST. It claimed to
have an OF1.1 experimenter error value although OF1.1 didn't have
experimenter errors. This commit changes it to use a Nicira extension
error in OF1.1 instead.
Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Ben Pfaff [Thu, 21 Aug 2014 03:59:43 +0000 (20:59 -0700)]
nx-match: Serialize standard xregs instead of Nicira registers, in OF1.5.
Commit 79fe0f4611b60 (meta-flow: Add 64-bit registers.) added support for
the OpenFlow 1.5 (draft) standardized registers, but neglected to cause
them to be serialized when Open vSwitch composes flow matches. This meant
that they were always sent to a controller as pairs of Nicira extension
registers. This commit fixes the problem.
Found by inspection.
ONF-JIRA: EXT-244 Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
In this change we have introduced buffer mgmt apis which will be
used while creating netlink messages. The basic functionality provided
by apis is on similar lines to ofpbuf in userspace with an exception
that it will not do run time buffer reallocation.
Signed-off-by: Ankur Sharma <ankursharma@vmware.com> Tested-by: Ankur Sharma <ankursharma@vmware.com>
Reported-at: https://github.com/openvswitch/ovs-issues/issues/37 Acked-by: Eitan Eliahu <eliahue@vmware.com> Acked-by: Alin Gabriel Serdean <aserdean at cloudbasesolutions.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
datapath-windows: Move netlink files to a new directory.
In this change we have created a new directory named Netlink
inside datapath-windows/ovsext/. This directory will be used to
keep all the netlink related files.
The reason we have created new directory is that for 'put' related
APIs we will be adding netlink buffer mgmt files as well. These files
will take the count of netlink related files to 5. Hence
we decided to club the netlink files in a single directory.
Signed-off-by: Ankur Sharma <ankursharma@vmware.com> Tested-by: Ankur Sharma <ankursharma@vmware.com>
Reported-at: https://github.com/openvswitch/ovs-issues/issues/37 Acked-by: Eitan Eliahu <eliahue@vmware.com> Acked-by: Alin Gabriel Serdean <aserdean at cloudbasesolutions.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
Alex Wang [Thu, 21 Aug 2014 22:54:07 +0000 (15:54 -0700)]
dpif-netdev: Introduce port_try_ref() to prevent a race.
When pmd thread interates through all ports for queue loading,
the main thread may unreference and 'rcu-free' a port before
pmd thread take new reference of it. This could cause pmd
thread fail the reference and access freed memory later.
This commit fixes this race by introducing port_try_ref()
which uses ovs_refcount_try_ref_rcu(). And the pmd thread
will only load the port's queue, if port_try_ref() returns
true.
Found by inspection.
Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
vtep: additions to BFD configuration and status reporting
This commit adds default values for some BFD configuration keys
(bfd_config_local:bfd_dst_mac and bfd_params:enable). It also adds new
BFD status keys (bfd_enabled and bfd_info).
Alex Wang [Tue, 17 Jun 2014 00:19:11 +0000 (17:19 -0700)]
netdev-dpdk: Make memory pool name contain the socket id.
This commit makes the memory pool name contain the socket id.
Since dpdk library do not allow creation of memory pool with
same name, this commit serves as a simple way of making each
name unique.
Signed-off-by: Alex Wang <alexw@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
getopt_long: Fix broken sequence of casts in __UNCONST macor.
Unlike the compilation mode used for OVS x64 Linux Windows long word is
4 bytes for both 32 and 64 bit builds.
Replaced _UNCONST macro with CONST_CAST to avoid the intermediate casting
to an integer.
Testing: 32 and 64 Windows builds. Signed-off-by: Eitan Eliahu eliahue@vmware.com Signed-off-by: Ben Pfaff <blp@nicira.com>
ofp-actions: Support "resubmit" actions in action sets.
Fixing issue where "resubmit" action in a group action set was not
considered sufficient to retain the full action set. This patch allows
a group action set (considered terminal with OF1.4 and earlier spec)
to have the "output" action come from a different table.
Thomas Graf [Fri, 29 Aug 2014 23:43:03 +0000 (01:43 +0200)]
travis: Run 'make distcheck' instead of 'make check'
make distcheck runs a superset of make check and will additionally
catch failures in adding new files to the Makefile. It will also test
installation and uninstallation of the package.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
These function are used to stored the packet hash. 'netdev-dpdk'
automatically set this value to the RSS hash returned by the
NIC. Other 'netdev's set it to 0 (which is an invalid hash
value), so that callers can compute the hash on their own.
If DPDK support is enabled, struct dpif_packet's member
'dp_hash' is removed and 'pkt.hash.rss' from DPDK mbuf is used
This commit also configure DPDK devices to compute RSS hash
for UDP and IPv6 packets
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 23:15:44 +0000 (16:15 -0700)]
lib/ovs-thread: Use atomic_count.
barrier->count is used as a simple counter and is not expected the
synchronize the state of any other variable, so we can use atomic_count,
which uses relaxed atomics.
Ditto for the 'next_id' within ovsthread_wrapper().
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 23:15:44 +0000 (16:15 -0700)]
lib/seq: Document acquire-release semantics.
Seq objects would be really hard to use if they did not provide
acquire-release semantics. Currently they do that via
ovs_mutex_lock()/ovs_mutex_unlock(), respectively. Document the
behavior so that it is safer to rely on that elsewhere.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
This commit introduces the BUILD_MESSAGE() macro. It uses _Pragma("message"),
with compilers that support that, to output a warning-like compile-time message
without blocking the compilation.
Used by next commit.
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Andy Zhou [Fri, 29 Aug 2014 20:20:23 +0000 (13:20 -0700)]
datapath: simplify sample action implementation
The current sample() function implementation is more complicated
than necessary in handling single user space action optimization
and skb reference counting. There is no functional changes.
Signed-off-by: Andy Zhou <azhou@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com>
Jesse Gross [Fri, 15 Aug 2014 18:01:54 +0000 (11:01 -0700)]
datapath: Fix checksum calculation when modifying ICMPv6 packets.
The checksum of ICMPv6 packets uses the IP pseudoheader as part of
the calculation, unlike ICMP in IPv4. This was not implemented,
which means that modifying the IP addresses of an ICMPv6 packet
would cause the checksum to no longer be correct as the psuedoheader
did not match.
Thomas Graf [Fri, 29 Aug 2014 10:21:49 +0000 (12:21 +0200)]
thread: Use explicit wide type when shifting > 32 bits
Without the explicit wide type, the shift operation may be performed
on a int which will result in implementation defined behaviour on a
system with more than 32 CPUs.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 17:34:53 +0000 (10:34 -0700)]
ofproto/ofproto: Use relaxed atomics.
Neither 'miss_config', 'n_missed', nor 'n_matched' is used to
synchronize the state of any other variable, so we can use relaxed
atomic operations on them.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 17:34:53 +0000 (10:34 -0700)]
ofproto/ofproto-dpif-upcall: Use relaxed atomic operations.
Neither 'enable_megaflows', 'udpif->flow_limit', 'udpif->n_flows', nor
'udpif->n_flows_timestamp' are used to synchronize the state of any
other variables, so we can use relaxed atomic operations to access
them.
Move the atomic read operation of 'enable_megaflows' outside the loop
in handle_upcalls().
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 17:34:53 +0000 (10:34 -0700)]
lib/netdev-dummy: Use relaxed atomics for a trivial counter.
Even though there is no need to optimize netdev-dummy, it might be
good to do this right, in case it serves as an inspiration for
something else later.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Jarno Rajahalme [Fri, 29 Aug 2014 17:34:52 +0000 (10:34 -0700)]
lib/ovs-atomic: Add helpers for relaxed atomic access.
When an atomic variable is not serving to synchronize threads about
the state of other (atomic or non-atomic) variables, no memory barrier
is needed with the atomic operation. However, the default memory
order for an atomic operation is memory_order_seq_cst, which always
causes a system-wide locking of the memory bus and prevents both the
CPU and the compiler from reordering memory accesses accross the
atomic operation. This can add considerable stalls as each atomic
operation (regardless of memory order) always includes a memory
access.
In most cases we can let the compiler reorder memory accesses to
minimize the time we spend waiting for the completion of the atomic
memory accesses by using the relaxed memory order. This patch adds
helpers to make such accesses a little easier on the eye (and the
fingers :-), but does not try to hide them completely.
Following patches make use of these and remove all the (implied)
memory_order_seq_cst use from the OVS code base.
Signed-off-by: Jarno Rajahalme <jrajahalme@nicira.com> Acked-by: Ben Pfaff <blp@nicira.com>
Pravin B Shelar [Wed, 27 Aug 2014 14:24:44 +0000 (07:24 -0700)]
datapath: Always initialize fix_segment for GSO packet.
OVS tunnel compat code depends on this function pointer to
handle GSO packet. Currently we do not initialize for all
GRE GSO packets. Following patch fixes that.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jesse Gross <jesse@nicira.com>
Samuel Ghinet [Fri, 29 Aug 2014 04:06:48 +0000 (04:06 +0000)]
datapath-windows: Rename files.
This patch includes the file renaming and accommodations needed for the file
renaming to build the forwarding extension for Hyper-V.
This patch is also a follow-up for the thread:
http://openvswitch.org/pipermail/dev/2014-August/044005.html
Signed-off-by: Samuel Ghinet <sghinet@cloudbasesolutions.com> Co-authored-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com> Signed-off-by: Ben Pfaff <blp@nicira.com>
Nithin Raju [Wed, 27 Aug 2014 15:36:19 +0000 (08:36 -0700)]
netlink-socket: Use read/write ioctl instead of ReadFile/WriteFile.
The Windows datapath supports a READ/WRITE ioctl instead of ReadFile/WriteFile.
In this change, we update the following:
- WriteFile() in nl_sock_send__() to use DeviceIoControl(OVS_IOCTL_WRITE)
- ReadFile() in nl_sock_recv__() to use DeviceIoControl(OVS_IOCTL_READ)
The WriteFile() call in nl_sock_transact_multiple__() has not been touched
since it is not needed yet.
Main motive for this change is to be able to unblock the DP Dump workflow.
Signed-off-by: Nithin Raju <nithin@vmware.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Eitan Eliahu <eliahue@vmware.com> Acked-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com>
Ben Pfaff [Thu, 28 Aug 2014 15:50:13 +0000 (08:50 -0700)]
CodingStyle: Relax restrictions on types of bit-fields.
C99 only requires compilers to support four types for bit-fields: signed
int, unsigned int, int, and _Bool. "int" should not be used because it
is implementation-defined whether it is signed. In practice, we have found
that compilers (in particular, GCC, Clang, and MSVC 2013) support any
integer type.
Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
Alin Serdean [Thu, 28 Aug 2014 13:49:24 +0000 (13:49 +0000)]
Add build of ovsext.sln using MSBuild
This commit adds to the automake build system the full build required
by the forwarding extension solution.
It will help a lot in the future CI to check the full build of the project.
To configure the forwarding extension to be built one could use the following:
./configure CC=./build-aux/cccl LD="`which link`" LIBS="-lws2_32" \
--prefix="C:/openvswitch/usr" --localstatedir="C:/openvswitch/var" \
--sysconfdir="C:/openvswitch/etc" --with-pthread="C:/pthread" \
--with-vstudioddk="Win8.1 Release"
Documentation will be updated in another patch.
Signed-off-by: Alin Gabriel Serdean <aserdean@cloudbasesolutions.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Saurabh Shah <ssaurabh@vmware.com>
Thomas Graf [Thu, 28 Aug 2014 12:40:50 +0000 (14:40 +0200)]
ovsdb: Fix error leak for negative timeout and invalid until case
Although the check for negative timeout is present, the error string
is overwritten if an invalid "until" is found right after. This leaks
an error string and results in not reporting the negative timeout back
to the user even though it is encountered first.
Signed-off-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Ben Pfaff <blp@nicira.com>