Will Deacon [Wed, 6 Dec 2017 11:24:02 +0000 (11:24 +0000)]
arm64: kaslr: Put kernel vectors address in separate data page
The literal pool entry for identifying the vectors base is the only piece
of information in the trampoline page that identifies the true location
of the kernel.
This patch moves it into a page-aligned region of the .rodata section
and maps this adjacent to the trampoline text via an additional fixmap
entry, which protects against any accidental leakage of the trampoline
contents.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Fri, 1 Dec 2017 17:33:48 +0000 (17:33 +0000)]
arm64: mm: Introduce TTBR_ASID_MASK for getting at the ASID in the TTBR
There are now a handful of open-coded masks to extract the ASID from a
TTBR value, so introduce a TTBR_ASID_MASK and use that instead.
Suggested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Mon, 27 Nov 2017 15:49:53 +0000 (15:49 +0000)]
perf: arm_spe: Fail device probe when arm64_kernel_unmapped_at_el0()
When running with the kernel unmapped whilst at EL0, the virtually-addressed
SPE buffer is also unmapped, which can lead to buffer faults if userspace
profiling is enabled and potentially also when writing back kernel samples
unless an expensive drain operation is performed on exception return.
For now, fail the SPE driver probe when arm64_kernel_unmapped_at_el0().
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:41:01 +0000 (14:41 +0000)]
arm64: Kconfig: Add CONFIG_UNMAP_KERNEL_AT_EL0
Add a Kconfig entry to control use of the entry trampoline, which allows
us to unmap the kernel whilst running in userspace and improve the
robustness of KASLR.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:38:19 +0000 (14:38 +0000)]
arm64: entry: Add fake CPU feature for unmapping the kernel at EL0
Allow explicit disabling of the entry trampoline on the kernel command
line (kpti=off) by adding a fake CPU feature (ARM64_UNMAP_KERNEL_AT_EL0)
that can be used to toggle the alternative sequences in our entry code and
avoid use of the trampoline altogether if desired. This also allows us to
make use of a static key in arm64_kernel_unmapped_at_el0().
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:33:28 +0000 (14:33 +0000)]
arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks
When unmapping the kernel at EL0, we use tpidrro_el0 as a scratch register
during exception entry from native tasks and subsequently zero it in
the kernel_ventry macro. We can therefore avoid zeroing tpidrro_el0
in the context-switch path for native tasks using the entry trampoline.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:29:19 +0000 (14:29 +0000)]
arm64: erratum: Work around Falkor erratum #E1003 in trampoline code
We rely on an atomic swizzling of TTBR1 when transitioning from the entry
trampoline to the kernel proper on an exception. We can't rely on this
atomicity in the face of Falkor erratum #E1003, so on affected cores we
can issue a TLB invalidation to invalidate the walk cache prior to
jumping into the kernel. There is still the possibility of a TLB conflict
here due to conflicting walk cache entries prior to the invalidation, but
this doesn't appear to be the case on these CPUs in practice.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:24:29 +0000 (14:24 +0000)]
arm64: entry: Hook up entry trampoline to exception vectors
Hook up the entry trampoline to our exception vectors so that all
exceptions from and returns to EL0 go via the trampoline, which swizzles
the vector base register accordingly. Transitioning to and from the
kernel clobbers x30, so we use tpidrro_el0 and far_el1 as scratch
registers for native tasks.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:20:21 +0000 (14:20 +0000)]
arm64: entry: Explicitly pass exception level to kernel_ventry macro
We will need to treat exceptions from EL0 differently in kernel_ventry,
so rework the macro to take the exception level as an argument and
construct the branch target using that.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:14:17 +0000 (14:14 +0000)]
arm64: mm: Map entry trampoline into trampoline and kernel page tables
The exception entry trampoline needs to be mapped at the same virtual
address in both the trampoline page table (which maps nothing else)
and also the kernel page table, so that we can swizzle TTBR1_EL1 on
exceptions from and return to EL0.
This patch maps the trampoline at a fixed virtual address in the fixmap
area of the kernel virtual address space, which allows the kernel proper
to be randomized with respect to the trampoline when KASLR is enabled.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Tue, 14 Nov 2017 14:07:40 +0000 (14:07 +0000)]
arm64: entry: Add exception trampoline page for exceptions from EL0
To allow unmapping of the kernel whilst running at EL0, we need to
point the exception vectors at an entry trampoline that can map/unmap
the kernel on entry/exit respectively.
This patch adds the trampoline page, although it is not yet plugged
into the vector table and is therefore unused.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 13:13:33 +0000 (14:13 +0100)]
arm64: mm: Invalidate both kernel and user ASIDs when performing TLBI
Since an mm has both a kernel and a user ASID, we need to ensure that
broadcast TLB maintenance targets both address spaces so that things
like CoW continue to work with the uaccess primitives in the kernel.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
In order for code such as TLB invalidation to operate efficiently when
the decision to map the kernel at EL0 is determined at runtime, this
patch introduces a helper function, arm64_kernel_unmapped_at_el0, to
determine whether or not the kernel is mapped whilst running in userspace.
Currently, this just reports the value of CONFIG_UNMAP_KERNEL_AT_EL0,
but will later be hooked up to a fake CPU capability using a static key.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 13:10:28 +0000 (14:10 +0100)]
arm64: mm: Allocate ASIDs in pairs
In preparation for separate kernel/user ASIDs, allocate them in pairs
for each mm_struct. The bottom bit distinguishes the two: if it is set,
then the ASID will map only userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 12:58:16 +0000 (13:58 +0100)]
arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN
With the ASID now installed in TTBR1, we can re-enable ARM64_SW_TTBR0_PAN
by ensuring that we switch to a reserved ASID of zero when disabling
user access and restore the active user ASID on the uaccess enable path.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 12:34:30 +0000 (13:34 +0100)]
arm64: mm: Rename post_ttbr0_update_workaround
The post_ttbr0_update_workaround hook applies to any change to TTBRx_EL1.
Since we're using TTBR1 for the ASID, rename the hook to make it clearer
as to what it's doing.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 12:29:06 +0000 (13:29 +0100)]
arm64: mm: Remove pre_ttbr0_update_workaround for Falkor erratum #E1003
The pre_ttbr0_update_workaround hook is called prior to context-switching
TTBR0 because Falkor erratum E1003 can cause TLB allocation with the wrong
ASID if both the ASID and the base address of the TTBR are updated at
the same time.
With the ASID sitting safely in TTBR1, we no longer update things
atomically, so we can remove the pre_ttbr0_update_workaround macro as
it's no longer required. The erratum infrastructure and documentation
is left around for #E1003, as it will be required by the entry
trampoline code in a future patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 12:19:09 +0000 (13:19 +0100)]
arm64: mm: Move ASID from TTBR0 to TTBR1
In preparation for mapping kernelspace and userspace with different
ASIDs, move the ASID to TTBR1 and update switch_mm to context-switch
TTBR0 via an invalid mapping (the zero page).
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 12:04:48 +0000 (13:04 +0100)]
arm64: mm: Temporarily disable ARM64_SW_TTBR0_PAN
We're about to rework the way ASIDs are allocated, switch_mm is
implemented and low-level kernel entry/exit is handled, so keep the
ARM64_SW_TTBR0_PAN code out of the way whilst we do the heavy lifting.
It will be re-enabled in a subsequent patch.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Will Deacon [Thu, 10 Aug 2017 11:56:18 +0000 (12:56 +0100)]
arm64: mm: Use non-global mappings for kernel space
In preparation for unmapping the kernel whilst running in userspace,
make the kernel mappings non-global so we can avoid expensive TLB
invalidation on kernel exit to userspace.
Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Jiri Slaby [Thu, 30 Nov 2017 14:35:44 +0000 (15:35 +0100)]
futex: futex_wake_op, fix sign_extend32 sign bits
sign_extend32 counts the sign bit parameter from 0, not from 1. So we
have to use "11" for 12th bit, not "12".
This mistake means we have not allowed negative op and cmp args since
commit 30d6e0a4190d ("futex: Remove duplicated code and fix undefined
behaviour") till now.
Fixes: 30d6e0a4190d ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 Dec 2017 16:30:04 +0000 (08:30 -0800)]
Merge tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This contains a few fixes (error handling, quota leak, FUA vs
nobarrier mount option).
There's one one worth mentioning separately - an off-by-one fix that
leads to overwriting first byte of an adjacent page with 0, out of
bounds of the memory allocated by an ioctl. This is under a privileged
part of the ioctl, can be triggerd in some subvolume layouts"
* tag 'for-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
Btrfs: disable FUA if mounted with nobarrier
btrfs: fix missing error return in btrfs_drop_snapshot
btrfs: handle errors while updating refcounts in update_ref_for_cow
btrfs: Fix quota reservation leak on preallocated files
Linus Torvalds [Sun, 10 Dec 2017 16:26:59 +0000 (08:26 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- A revert of all SCPI changes from the 4.15 merge window. They had
regressions on the Amlogic platforms, and the submaintainer isn't
around to fix these bugs due to vacation, etc. So we agreed to revert
and revisit in next release cycle.
- A series fixing a number of bugs for ARM CCN interconnect, around
module unload, smp_processor_id() in preemptable context, and fixing
some memory allocation failure checks.
- A handful of devicetree fixes for different platforms, fixing
warnings and errors that were previously ignored by the compiler.
- The usual set of mostly minor fixes for different platforms.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM64: dts: meson-gx: fix UART pclk clock name
ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
ARM: dts: Fix dm814x missing phy-cells property
ARM: dts: Fix elm interrupt compiler warning
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Simplify code
bus: arm-ccn: Check memory allocation failure
bus: arm-ccn: constify attribute_group structures.
firmware: arm_scpi: Revert updates made during v4.15 merge window
arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
arm64: dts: sort vendor subdirectories in Makefile alphabetically
meson-gx-socinfo: Fix package id parsing
ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
ARM: dts: meson: fix the memory region of the GPIO interrupt controller
ARM: dts: meson: correct the sort order for the the gpio_intc node
MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
arm64: dts: uniphier: remove unnecessary interrupt-parent
...
Linus Torvalds [Sun, 10 Dec 2017 16:24:16 +0000 (08:24 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- A number of issues in the vgic discovered using SMATCH
- A bit one-off calculation in out stage base address mask (32-bit
and 64-bit)
- Fixes to single-step debugging instructions that trap for other
reasons such as MMMIO aborts
- Printing unavailable hyp mode as error
- Potential spinlock deadlock in the vgic
- Avoid calling vgic vcpu free more than once
- Broken bit calculation for big endian systems
s390:
- SPDX tags
- Fence storage key accesses from problem state
- Make sure that irq_state.flags is not used in the future
x86:
- Intercept port 0x80 accesses to prevent host instability (CVE)
- Use userspace FPU context for guest FPU (mainly an optimization
that fixes a double use of kernel FPU)
- Do not leak one page per module load
- Flush APIC page address cache from MMU invalidation notifiers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: x86: fix APIC page invalidation
KVM: s390: Fix skey emulation permission check
KVM: s390: mark irq_state.flags as non-usable
KVM: s390: Remove redundant license text
KVM: s390: add SPDX identifiers to the remaining files
KVM: VMX: fix page leak in hardware_setup()
KVM: VMX: remove I/O port 0x80 bypass on Intel hosts
x86,kvm: remove KVM emulator get_fpu / put_fpu
x86,kvm: move qemu/guest FPU switching out to vcpu_run
KVM: arm/arm64: Fix broken GICH_ELRSR big endian conversion
KVM: arm/arm64: kvm_arch_destroy_vm cleanups
KVM: arm/arm64: Fix spinlock acquisition in vgic_set_owner
kvm: arm: don't treat unavailable HYP mode as an error
KVM: arm/arm64: Avoid attempting to load timer vgic state without a vgic
kvm: arm64: handle single-step of hyp emulated mmio instructions
kvm: arm64: handle single-step during SError exceptions
kvm: arm64: handle single-step of userspace mmio instructions
kvm: arm64: handle single-stepping trapped instructions
KVM: arm/arm64: debug: Introduce helper for single-step
arm: KVM: Fix VTTBR_BADDR_MASK BUG_ON off-by-one
...
Olof Johansson [Sun, 10 Dec 2017 04:23:29 +0000 (20:23 -0800)]
Merge tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes
Amlogic fixes for v4.15-rc
- GPIO interrupt fixes
- socinfo fix for GX series
- fix typo
* tag 'amlogic-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gx: fix UART pclk clock name
meson-gx-socinfo: Fix package id parsing
ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
ARM: dts: meson: fix the memory region of the GPIO interrupt controller
ARM: dts: meson: correct the sort order for the the gpio_intc node
Olof Johansson [Sun, 10 Dec 2017 04:22:46 +0000 (20:22 -0800)]
Merge tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux into fixes
bus: ARM CCN and CCI PMU driver fixes
This is a bunch of fixes CCN and (guest starring this time) CCI drivers.
* Check for potential of failed allocation for the driver name string
* Manage CPU ID properly at allocation (both CCN and CCI)
* Fix module unload warnings related to objects release order
* Small improvements like using allocating printfs and proper
attributes constification
The one fixing potential issues have been cc-ed to stable.
* tag 'ccn/fixes-for-4.15' of git://git.linaro.org/people/pawel.moll/linux:
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Simplify code
bus: arm-ccn: Check memory allocation failure
bus: arm-ccn: constify attribute_group structures.
Michal Hocko [Wed, 6 Dec 2017 10:27:57 +0000 (11:27 +0100)]
kmemcheck: rip it out for real
Commit 4675ff05de2d ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place. This looks like a rebase
mistake in the mmotm tree or the merge mistake. Let's drop those
leftovers as well.
Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
Linus Torvalds [Fri, 8 Dec 2017 21:18:47 +0000 (13:18 -0800)]
Merge tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the media subsytem:
- The largest amount of fixes in this series is with regards to
comments that aren't kernel-doc, but start with "/**".
A new check added for 4.15 makes it to produce a *huge* amount of
new warnings (I'm compiling here with W=1). Most of the patches in
this series fix those.
No code changes - just comment changes at the source files
- rc: some fixed in order to better handle RC repetition codes
- v4l-async: use the v4l2_dev from the root notifier when matching
sub-devices
- v4l2-fwnode: Check subdev count after checking port
- ov 13858 and et8ek8: compilation fix with randconfigs
- usbtv: a trivial new USB ID addition
- dibusb-common: don't do DMA on stack on firmware load
Linus Torvalds [Fri, 8 Dec 2017 21:11:57 +0000 (13:11 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This pull is a bit larger than I'd like but a large bunch of it is
license fixes, AMD wanted to fix the licenses for a bunch of files
that were missing them,
Otherwise a bunch of TTM regression fix since the hugepage support,
some i915 and gvt fixes, a core connector free in a safe context fix,
and one bridge fix"
* tag 'drm-fixes-for-v4.15-rc3' of git://people.freedesktop.org/~airlied/linux: (26 commits)
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/exynos: remove unnecessary function declaration
drm/exynos: remove unnecessary descrptions
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
drm/exynos: Fix dma-buf import
drm/ttm: swap consecutive allocated pooled pages v4
drm: safely free connectors from connector_iter
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/ttm: swap consecutive allocated cached pages v3
drm/ttm: roundup the shrink request to prevent skip huge pool
drm/ttm: add page order support in ttm_pages_put
drm/ttm: add set_pages_wb for handling page order more than zero
drm/ttm: add page order in page pool
...
Linus Torvalds [Fri, 8 Dec 2017 21:03:02 +0000 (13:03 -0800)]
Merge tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull md fixes from Shaohua Li:
"Some MD fixes.
The notable one is a raid5-cache deadlock bug with dm-raid, others are
not significant"
* tag 'md/4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid1/10: add missed blk plug
md: limit mdstat resync progress to max_sectors
md/r5cache: move mddev_lock() out of r5c_journal_mode_set()
md/raid5: correct degraded calculation in raid5_error
Linus Torvalds [Fri, 8 Dec 2017 20:58:51 +0000 (12:58 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio bugfixes from Michael Tsirkin:
"A couple of minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_net: fix return value check in receive_mergeable()
virtio_mmio: add cleanup for virtio_mmio_remove
virtio_mmio: add cleanup for virtio_mmio_probe
Linus Torvalds [Fri, 8 Dec 2017 20:53:43 +0000 (12:53 -0800)]
Merge tag 'for-linus-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Just two small fixes for the new pvcalls frontend driver"
* tag 'for-linus-4.15-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvcalls: Fix a check in pvcalls_front_remove()
xen/pvcalls: check for xenbus_read() errors
Linus Torvalds [Fri, 8 Dec 2017 20:52:09 +0000 (12:52 -0800)]
Merge tag 'powerpc-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix for kexec on Power9, where we were not clearing MMU
PID properly which sometimes leads to hangs. Finally debugged to a
root cause by Nick.
A revert of a patch which tried to rework our panic handling to get
more output on the console, but inadvertently broke reporting the
panic to the hypervisor, which apparently people care about.
Then a fix for an oops in the PMU code, and finally some s/%p/%px/ in
xmon.
Thanks to: David Gibson, Nicholas Piggin, Ravi Bangoria"
* tag 'powerpc-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xmon: Don't print hashed pointers in xmon
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
powerpc/perf: Fix oops when grouping different pmu events
David S. Miller [Fri, 8 Dec 2017 19:53:54 +0000 (14:53 -0500)]
Merge tag 'linux-can-fixes-for-4.15-20171208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-12-08
this is a pull request of 6 patches for net/master.
Martin Kelly provides 5 patches for various USB based CAN drivers, that
properly cancel the URBs on adapter unplug, so that the driver doesn't
end up in an endless loop. Stephane Grosjean provides a patch to restart
the tx queue if zero length packages are transmitted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 8 Dec 2017 19:48:49 +0000 (14:48 -0500)]
Merge tag 'wireless-drivers-for-davem-2017-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
Second set of fixes for 4.15. This time a lot of iwlwifi patches and
two brcmfmac patches. Most important here are the MIC and IVC fixes
for iwlwifi to unbreak 9000 series.
iwlwifi
* fix rate-scaling to not start lowest possible rate
* fix the TX queue hang detection for AP/GO modes
* fix the TX queue hang timeout in monitor interfaces
* fix packet injection
* remove a wrong error message when dumping PCI registers
* fix race condition with RF-kill
* tell mac80211 when the MIC has been stripped (9000 series)
* tell mac80211 when the IVC has been stripped (9000 series)
* add 2 new PCI IDs, one for 9000 and one for 22000
* fix a queue hang due during a P2P Remain-on-Channel operation
brcmfmac
* fix a race which sometimes caused a crash during sdio unbind
* fix a kernel-doc related build error
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Fri, 8 Dec 2017 09:24:20 +0000 (10:24 +0100)]
net: mvpp2: fix the RSS table entry offset
The macro used to access or set an RSS table entry was using an offset
of 8, while it should use an offset of 0. This lead to wrongly configure
the RSS table, not accessing the right entries.
Fixes: 1d7d15d79fb4 ("net: mvpp2: initialize the RSS tables") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:33 +0000 (11:33 -0800)]
tcp: evaluate packet losses upon RTT change
RACK skips an ACK unless it advances the most recently delivered
TX timestamp (rack.mstamp). Since RACK also uses the most recent
RTT to decide if a packet is lost, RACK should still run the
loss detection whenever the most recent RTT changes. For example,
an ACK that does not advance the timestamp but triggers the cwnd
undo due to reordering, would then use the most recent (higher)
RTT measurement to detect further losses.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:31 +0000 (11:33 -0800)]
tcp: always evaluate losses in RACK upon undo
When sender detects spurious retransmission, all packets
marked lost are remarked to be in-flight. However some may
be considered lost based on its timestamps in RACK. This patch
forces RACK to re-evaluate, which may be skipped previously if
the ACK does not advance RACK timestamp.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 7 Dec 2017 19:33:30 +0000 (11:33 -0800)]
tcp: correctly test congestion state in RACK
RACK does not test the loss recovery state correctly to compute
the reordering window. It assumes if lost_out is zero then TCP is
not in loss recovery. But it can be zero during recovery before
calling tcp_rack_detect_loss(): when an ACK acknowledges all
packets marked lost before receiving this ACK, but has not yet
to discover new ones by tcp_rack_detect_loss(). The fix is to
simply test the congestion state directly.
Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Priyaranjan Jha <priyarjha@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Calvin Owens [Fri, 8 Dec 2017 17:05:26 +0000 (09:05 -0800)]
bnxt_en: Fix sources of spurious netpoll warnings
After applying 2270bc5da3497945 ("bnxt_en: Fix netpoll handling") and 903649e718f80da2 ("bnxt_en: Improve -ENOMEM logic in NAPI poll loop."),
we still see the following WARN fire:
This happens because we increment rx_pkts on -ENOMEM and -EIO, resulting
in rx_pkts > 0. Fix this by only bumping rx_pkts if we were actually
given a non-zero budget.
Signed-off-by: Calvin Owens <calvinowens@fb.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Armstrong [Mon, 4 Dec 2017 09:04:53 +0000 (10:04 +0100)]
ARM64: dts: meson-gx: fix UART pclk clock name
The clock-names for pclk was wrongly set to "core", but the bindings
specifies "pclk".
This was not cathed until the legacy non-documented bindings were removed.
Reported-by: Andreas Färber <afaerber@suse.de> Fixes: f72d6f6037b7 ("ARM64: dts: meson-gx: use stable UART bindings with correct gate clock") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
David S. Miller [Fri, 8 Dec 2017 18:27:44 +0000 (13:27 -0500)]
Merge branch 'tcp-bbr-sampling-fixes'
Neal Cardwell says:
====================
TCP BBR sampling fixes for loss recovery undo
This patch series has a few minor bug fixes for cases where spurious
loss recoveries can trick BBR estimators into estimating that the
available bandwidth is much lower than the true available bandwidth.
In both cases the fix here is to just reset the estimator upon loss
recovery undo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:32 +0000 (12:43 -0500)]
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
Fix BBR so that upon notification of a loss recovery undo BBR resets
long-term bandwidth sampling.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
can cause BBR to spuriously estimate that we are seeing loss rates
high enough to trigger long-term bandwidth estimation. To avoid that
problem, this commit resets long-term bandwidth sampling on loss
recovery undo events.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:31 +0000 (12:43 -0500)]
tcp_bbr: reset full pipe detection on loss recovery undo
Fix BBR so that upon notification of a loss recovery undo BBR resets
the full pipe detection (STARTUP exit) state machine.
Under high reordering, reordering events can be interpreted as loss.
If the reordering and spurious loss estimates are high enough, this
could previously cause BBR to spuriously estimate that the pipe is
full.
Since spurious loss recovery means that our overall sending will have
slowed down spuriously, this commit gives a flow more time to probe
robustly for bandwidth and decide the pipe is really full.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Thu, 7 Dec 2017 17:43:30 +0000 (12:43 -0500)]
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
This commit records the "full bw reached" decision in a new
full_bw_reached bit. This is a pure refactor that does not change the
current behavior, but enables subsequent fixes and improvements.
In particular, this enables simple and clean fixes because the full_bw
and full_bw_cnt can be unconditionally zeroed without worrying about
forgetting that we estimated we filled the pipe in Startup. And it
enables future improvements because multiple code paths can be used
for estimating that we filled the pipe in Startup; any new code paths
only need to set this bit when they think the pipe is full.
Note that this fix intentionally reduces the width of the full_bw_cnt
counter, since we have never used the most significant bit.
Signed-off-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bert Kenward [Thu, 7 Dec 2017 17:18:58 +0000 (17:18 +0000)]
sfc: pass valid pointers from efx_enqueue_unwind
The bytes_compl and pkts_compl pointers passed to efx_dequeue_buffers
cannot be NULL. Add a paranoid warning to check this condition and fix
the one case where they were NULL.
efx_enqueue_unwind() is called very rarely, during error handling.
Without this fix it would fail with a NULL pointer dereference in
efx_dequeue_buffer, with efx_enqueue_skb in the call stack.
Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Reported-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Tested-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Claudiu Manoil [Thu, 7 Dec 2017 16:44:23 +0000 (18:44 +0200)]
gianfar: Disable EEE autoneg by default
This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Tested-by: Yangbo Lu <Yangbo.lu@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 8 Dec 2017 18:10:17 +0000 (10:10 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- three more patches in regard to the SPDX license tags. The missing
tags for the files in arch/s390/kvm will be merged via the KVM tree.
With that all s390 related files should have their SPDX tags.
- a patch to get rid of 'struct timespec' in the DASD driver.
- bug fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix compat system call table
s390/mm: fix off-by-one bug in 5-level page table handling
s390: Remove redudant license text
s390: add a few more SPDX identifiers
s390/dasd: prevent prefix I/O error
s390: always save and restore all registers on context switch
s390/dasd: remove 'struct timespec' usage
s390/qdio: restrict target-full handling to IQDIO
s390/qdio: consider ERROR buffers for inbound-full condition
s390/virtio: add BSD license to virtio-ccw
Linus Torvalds [Fri, 8 Dec 2017 18:08:23 +0000 (10:08 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Fix some more FP register fallout from the SVE patches and also some
problems with the PGD tracking in our software PAN emulation code,
after we received a crash report from a 3.18 kernel running a
backport.
Summary:
- fix SW PAN pgd shadowing for kernel threads, EFI and exiting user
tasks
- fix FP register leak when a task_struct is re-allocated
- fix potential use-after-free in FP state tracking used by KVM"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Avoid dereference of dead task_struct in KVM guest entry
arm64: SW PAN: Update saved ttbr0 value on enter_lazy_tlb
arm64: SW PAN: Point saved ttbr0 at the zero page when switching to init_mm
arm64: fpsimd: Abstract out binding of task's fpsimd context to the cpu.
arm64: fpsimd: Prevent registers leaking from dead tasks
Linus Torvalds [Fri, 8 Dec 2017 17:58:10 +0000 (09:58 -0800)]
Merge tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes an issue in the device runtime PM framework that prevents
customer devices from resuming if runtime PM is disabled for one or
more of their supplier devices (as reflected by device links between
those devices)"
* tag 'pm-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Fix handling of suppliers with disabled runtime PM
of: overlay: Make node skipping in init_overlay_changeset() clearer
Make it more clear that nodes without "__overlay__" subnodes are
skipped, by reverting the logic and using continue.
This also reduces indentation level.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
of: overlay: Fix out-of-bounds write in init_overlay_changeset()
If an overlay has no "__symbols__" node, but it has nodes without
"__overlay__" subnodes at the end (e.g. a "__fixups__" node), after
filling in all fragments for nodes with "__overlay__" subnodes,
"fragment = &fragments[cnt]" will point beyond the end of the allocated
array.
Hence writing to "fragment->overlay" will overwrite unallocated memory,
which may lead to a crash later.
Fix this by deferring both the assignment to "fragment" and the
offending write afterwards until we know for sure the node has an
"__overlay__" subnode, and thus a valid entry in "fragments[]".
Fixes: 61b4de4e0b384f4a ("of: overlay: minor restructuring") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
Eric Biggers [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
X.509: fix comparisons of ->pkey_algo
->pkey_algo used to be an enum, but was changed to a string by commit 4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum"). But
two comparisons were not updated. Fix them to use strcmp().
This bug broke signature verification in certain configurations,
depending on whether the string constants were deduplicated or not.
Fixes: 4e8ae72a75aa ("X.509: Make algo identifiers text instead of enum") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
KEYS: reject NULL restriction string when type is specified
keyctl_restrict_keyring() allows through a NULL restriction when the
"type" is non-NULL, which causes a NULL pointer dereference in
asymmetric_lookup_restriction() when it calls strcmp() on the
restriction string.
But no key types actually use a "NULL restriction" to mean anything, so
update keyctl_restrict_keyring() to reject it with EINVAL.
Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 97d3aa0f3134 ("KEYS: Add a lookup_restriction function for the asymmetric key type") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Colin Ian King [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
security: keys: remove redundant assignment to key_ref
Variable key_ref is being assigned a value that is never read;
key_ref is being re-assigned a few statements later. Hence this
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:29 +0000 (15:13 +0000)]
KEYS: be careful with error codes in public_key_verify_signature()
In public_key_verify_signature(), if akcipher_request_alloc() fails, we
return -ENOMEM. But that error code was set 25 lines above, and by
accident someone could easily insert new code in between that assigns to
'ret', which would introduce a signature verification bypass. Make the
code clearer by moving the -ENOMEM down to where it is used.
Additionally, the callers of public_key_verify_signature() only consider
a negative return value to be an error. This means that if any positive
return value is accidentally introduced deeper in the call stack (e.g.
'return EBADMSG' instead of 'return -EBADMSG' somewhere in RSA),
signature verification will be bypassed. Make things more robust by
having public_key_verify_signature() warn about positive errors and
translate them into -EINVAL.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:28 +0000 (15:13 +0000)]
pkcs7: fix check for self-signed certificate
pkcs7_validate_trust_one() used 'x509->next == x509' to identify a
self-signed certificate. That's wrong; ->next is simply the link in the
linked list of certificates in the PKCS#7 message. It should be
checking ->signer instead. Fix it.
Fortunately this didn't actually matter because when we re-visited
'x509' on the next iteration via 'x509->signer', it was already seen and
not verified, so we returned -ENOKEY anyway.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:28 +0000 (15:13 +0000)]
509: fix printing uninitialized stack memory when OID is empty
Callers of sprint_oid() do not check its return value before printing
the result. In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed. Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.
Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:28 +0000 (15:13 +0000)]
X.509: fix buffer overflow detection in sprint_oid()
In sprint_oid(), if the input buffer were to be more than 1 byte too
small for the first snprintf(), 'bufsize' would underflow, causing a
buffer overflow when printing the remainder of the OID.
Fortunately this cannot actually happen currently, because no users pass
in a buffer that can be too small for the first snprintf().
Regardless, fix it by checking the snprintf() return value correctly.
For consistency also tweak the second snprintf() check to look the same.
Fixes: 4f73175d0375 ("X.509: Add utility functions to render OIDs as strings") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
X.509: reject invalid BIT STRING for subjectPublicKey
Adding a specially crafted X.509 certificate whose subjectPublicKey
ASN.1 value is zero-length caused x509_extract_key_data() to set the
public key size to SIZE_MAX, as it subtracted the nonexistent BIT STRING
metadata byte. Then, x509_cert_parse() called kmemdup() with that bogus
size, triggering the WARN_ON_ONCE() in kmalloc_slab().
This appears to be harmless, but it still must be fixed since WARNs are
never supposed to be user-triggerable.
Fix it by updating x509_cert_parse() to validate that the value has a
BIT STRING metadata byte, and that the byte is 0 which indicates that
the number of bits in the bitstring is a multiple of 8.
It would be nice to handle the metadata byte in asn1_ber_decoder()
instead. But that would be tricky because in the general case a BIT
STRING could be implicitly tagged, and/or could legitimately have a
length that is not a whole number of bytes.
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
ASN.1: check for error from ASN1_OP_END__ACT actions
asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT. In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes). Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.
This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).
In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest. But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.
Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <james.l.morris@oracle.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
ASN.1: fix out-of-bounds read when parsing indefinite length item
In asn1_ber_decoder(), indefinitely-sized ASN.1 items were being passed
to the action functions before their lengths had been computed, using
the bogus length of 0x80 (ASN1_INDEFINITE_LENGTH). This resulted in
reading data past the end of the input buffer, when given a specially
crafted message.
Fix it by rearranging the code so that the indefinite length is resolved
before the action is called.
This bug was originally found by fuzzing the X.509 parser in userspace
using libFuzzer from the LLVM project.
KASAN report (cleaned up slightly):
BUG: KASAN: slab-out-of-bounds in memcpy ./include/linux/string.h:341 [inline]
BUG: KASAN: slab-out-of-bounds in x509_fabricate_name.constprop.1+0x1a4/0x940 crypto/asymmetric_keys/x509_cert_parser.c:366
Read of size 128 at addr ffff880035dd9eaf by task keyctl/195
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
KEYS: add missing permission check for request_key() destination
When the request_key() syscall is not passed a destination keyring, it
links the requested key (if constructed) into the "default" request-key
keyring. This should require Write permission to the keyring. However,
there is actually no permission check.
This can be abused to add keys to any keyring to which only Search
permission is granted. This is because Search permission allows joining
the keyring. keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_SESSION_KEYRING)
then will set the default request-key keyring to the session keyring.
Then, request_key() can be used to add keys to the keyring.
Both negatively and positively instantiated keys can be added using this
method. Adding negative keys is trivial. Adding a positive key is a
bit trickier. It requires that either /sbin/request-key positively
instantiates the key, or that another thread adds the key to the process
keyring at just the right time, such that request_key() misses it
initially but then finds it in construct_alloc_key().
Fix this bug by checking for Write permission to the keyring in
construct_get_dest_keyring() when the default keyring is being used.
We don't do the permission check for non-default keyrings because that
was already done by the earlier call to lookup_user_key(). Also,
request_key_and_link() is currently passed a 'struct key *' rather than
a key_ref_t, so the "possessed" bit is unavailable.
We also don't do the permission check for the "requestor keyring", to
continue to support the use case described by commit 8bbf4976b59f
("KEYS: Alter use of key instantiation link-to-keyring argument") where
/sbin/request-key recursively calls request_key() to add keys to the
original requestor's destination keyring. (I don't know of any users
who actually do that, though...)
Fixes: 3e30148c3d52 ("[PATCH] Keys: Make request-key create an authorisation key") Cc: <stable@vger.kernel.org> # v2.6.13+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Eric Biggers [Fri, 8 Dec 2017 15:13:27 +0000 (15:13 +0000)]
KEYS: remove unnecessary get/put of explicit dest_keyring
In request_key_and_link(), in the case where the dest_keyring was
explicitly specified, there is no need to get another reference to
dest_keyring before calling key_link(), then drop it afterwards. This
is because by definition, we already have a reference to dest_keyring.
This change is useful because we'll be making
construct_get_dest_keyring() able to return an error code, and we don't
want to have to handle that error here for no reason.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com>
Yousuk Seung [Thu, 7 Dec 2017 21:41:34 +0000 (13:41 -0800)]
tcp: invalidate rate samples during SACK reneging
Mark tcp_sock during a SACK reneging event and invalidate rate samples
while marked. Such rate samples may overestimate bw by including packets
that were SACKed before reneging.
In above example the rate sample taken after the last ack will count
7001-38001 as delivered while the actual delivery rate likely could
be much lower i.e. 7001-8001.
This patch adds a new field tcp_sock.sack_reneg and marks it when we
declare SACK reneging and entering TCP_CA_Loss, and unmarks it after
the last rate sample was taken before moving back to TCP_CA_Open. This
patch also invalidates rate samples taken while tcp_sock.is_sack_reneg
is set.
Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Yousuk Seung <ysseung@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
can: peak/pcie_fd: fix potential bug in restarting tx queue
Don't rely on can_get_echo_skb() return value to wake the network tx
queue up: can_get_echo_skb() returns 0 if the echo array slot was not
occupied, but also when the DLC of the released echo frame was 0.
Martin Kelly [Tue, 5 Dec 2017 19:15:50 +0000 (11:15 -0800)]
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:49 +0000 (11:15 -0800)]
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:48 +0000 (11:15 -0800)]
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 19:15:47 +0000 (11:15 -0800)]
can: ems_usb: cancel urb on -EPIPE and -EPROTO
In mcba_usb, we have observed that when you unplug the device, the driver will
endlessly resubmit failing URBs, which can cause CPU stalls. This issue
is fixed in mcba_usb by catching the codes seen on device disconnect
(-EPIPE and -EPROTO).
This driver also resubmits in the case of -EPIPE and -EPROTO, so fix it
in the same way.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Kelly [Tue, 5 Dec 2017 18:34:03 +0000 (10:34 -0800)]
can: mcba_usb: cancel urb on -EPROTO
When we unplug the device, we can see both -EPIPE and -EPROTO depending
on exact timing and what system we run on. If we continue to resubmit
URBs, they will immediately fail, and they can cause stalls, especially
on slower CPUs.
Fix this by not resubmitting on -EPROTO, as we already do on -EPIPE.
Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dave Airlie [Thu, 7 Dec 2017 22:17:53 +0000 (08:17 +1000)]
Merge tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
regression fix for vc4 + rpm stable fix for analogix bridge
* tag 'drm-misc-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
drm/vc4: Fix false positive WARN() backtrace on refcount_inc() usage
Dave Airlie [Thu, 7 Dec 2017 22:17:09 +0000 (08:17 +1000)]
Merge tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for fd.o bug #103997 CNL eDP + HDMI causing a machine hard hang (James)
- Fix to allow suspending with a wedged GPU to hopefully unwedge it (Chris)
- Fix for Gen2 vblank timestap/frame counter jumps (Ville)
- Revert of a W/A for enabling FBC on CNL/GLK for certain images
and sizes (Rodrigo)
- Lockdep fix for i915 userptr code (Chris)
gvt-fixes-2017-12-06
- Fix invalid hw reg read value for vGPU (Xiong)
- Fix qemu warning on PCI ROM bar missing (Changbin)
- Workaround preemption regression (Zhenyu)
* tag 'drm-intel-fixes-2017-12-07' of git://anongit.freedesktop.org/drm/drm-intel:
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Call i915_gem_init_userptr() before taking struct_mutex
drm/i915/gvt: set max priority for gvt context
drm/i915/gvt: Don't mark vgpu context as inactive when preempted
drm/i915/gvt: Limit read hw reg to active vgpu
drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()
drm/i915/gvt: Emulate PCI expansion ROM base address register
drm/i915/cnl: Mask previous DDI - PLL mapping
drm/i915: Fix vblank timestamp/frame counter jumps on gen2
drm/i915: Skip switch-to-kernel-context on suspend when wedged
Dave Airlie [Thu, 7 Dec 2017 22:15:09 +0000 (08:15 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- fix page fault issue due to using wrong device object in prime import.
- drop NONCONTIG flag without IOMMU support.
- remove unnecessary members and declaration.
* tag 'exynos-drm-fixes-for-v4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove unnecessary function declaration
drm/exynos: remove unnecessary descrptions
drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
drm/exynos: Fix dma-buf import
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fixing broken uapi for BPF tracing programs for s390 and arm64
architectures due to pt_regs being in-kernel only, and not part
of uapi right now. A wrapper is added that exports pt_regs in
an asm-generic way. For arm64 this maps to existing user_pt_regs
structure and for s390 a user_pt_regs structure exporting the
beginning of pt_regs is added and uapi-exported, thus fixing the
BPF issues seen in perf (and BPF selftests), all from Hendrik.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjørn Mork [Wed, 6 Dec 2017 19:21:24 +0000 (20:21 +0100)]
usbnet: fix alignment for frames with no ethernet header
The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".
Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.
Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <jay@systech.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 6 Dec 2017 19:08:19 +0000 (11:08 -0800)]
tcp: use current time in tcp_rcv_space_adjust()
When I switched rcv_rtt_est to high resolution timestamps, I forgot
that tp->tcp_mstamp needed to be refreshed in tcp_rcv_space_adjust()
Using an old timestamp leads to autotuning lags.
Fixes: 645f4c6f2ebd ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 7 Dec 2017 04:09:12 +0000 (20:09 -0800)]
netlink: Relax attr validation for fixed length types
Commit 28033ae4e0f5 ("net: netlink: Update attr validation to require
exact length for some types") requires attributes using types NLA_U* and
NLA_S* to have an exact length. This change is exposing bugs in various
userspace commands that are sending attributes with an invalid length
(e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While
the commands are clearly broken and need to be fixed, users are arguing
that the sudden change in enforcement is breaking older commands on
newer kernels for use cases that otherwise "worked".
Relax the validation to print a warning mesage similar to what is done
for messages containing extra bytes after parsing.
Fixes: 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types") Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels")
introduced new exit point in ipxip6_rcv. however rcu_read_unlock is
missing there. this diff is fixing this
v1->v2:
instead of doing rcu_read_unlock in place, we are going to "drop"
section (to prevent skb leakage)
Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 7 Dec 2017 18:53:05 +0000 (13:53 -0500)]
Merge branch 'mv88e6xxx-error-patch-fixes'
Andrew Lunn says:
====================
mv88e6xxx error patch fixes
While trying to bring up a new PHY on a board, i exercised the error
paths a bit, and discovered some bugs. The unwind for interrupt
handling deadlocks, and the MDIO code hits a BUG() when a registered
MDIO device is freed without first being unregistered.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 7 Dec 2017 00:05:57 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Unregister MDIO bus on error path
The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 7 Dec 2017 00:05:56 +0000 (01:05 +0100)]
net: dsa: mv88e6xxx: Fix interrupt masking on removal
When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.
Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.
Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Jordan [Wed, 6 Dec 2017 14:23:23 +0000 (15:23 +0100)]
net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case
add appropriate calls to clk_disable_unprepare() by jumping to out_mdio
in case orion_mdio_probe() returns -EPROBE_DEFER.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
weiping zhang [Wed, 6 Dec 2017 13:59:16 +0000 (21:59 +0800)]
virtio_mmio: add cleanup for virtio_mmio_probe
As mentioned at drivers/base/core.c:
/*
* NOTE: _Never_ directly free @dev after calling this function, even
* if it returned an error! Always use put_device() to give up the
* reference initialized in this function instead.
*/
so we don't free vm_dev until vm_dev.dev.release be called.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
projects / mirror_ubuntu-kernels.git / log