Ken Cox [Tue, 4 Mar 2014 13:58:11 +0000 (07:58 -0600)]
staging: virthba driver to access shared SCSI hba
The virthba module provides access to a shared SCSI host bus adapter
and one or more disk devices, by proxying SCSI commands between the
guest and the service partition that owns the shared SCSI adapter,
using a channel between the guest and the service partition. The disks
that appear on the shared bus are defined by the s-Par configuration
and enforced by the service partition, while the guest driver handles
sending commands and handling responses. Each disk is shared as a
whole to a guest. Sharing the bus adapter in this way provides
resiliency; should the device encounter an error, only the service
partition is rebooted, and the device is reinitialized. This allows
guests to continue running and to recover from the error.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Tue, 4 Mar 2014 13:58:07 +0000 (07:58 -0600)]
staging: visorchipset driver to provide registration and other services
The visorchipset module receives device creation and destruction
events from the Command service partition of s-Par, as well as
controlling registration of shared device drivers with the s-Par
driver core. The events received are used to populate other s-Par
modules with their assigned shared devices. Visorchipset is required
for shared device drivers to function properly. Visorchipset also
stores information for handling dump disk device creation during
kdump.
In operation, the visorchipset module processes device creation and
destruction messages sent by s-Par's Command service partition through
a channel. These messages result in creation (or destruction) of each
virtual bus and virtual device. Each bus and device is also associated
with a communication channel, which is used to communicate with one or
more IO service partitions to perform device IO on behalf of the
guest.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ken Cox [Tue, 4 Mar 2014 13:58:05 +0000 (07:58 -0600)]
staging: visorutil driver to provide common functionality to other s-Par drivers
The visorutil module is a support library required by all other s-Par
driver modules. Among its features it abstracts reading, writing, and
manipulating a block of memory.
Signed-off-by: Ken Cox <jkc@redhat.com> Cc: Ben Romer <sparmaintainer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Surendra Patil [Tue, 4 Mar 2014 07:57:47 +0000 (23:57 -0800)]
drivers:staging:ozwpan Replaced wrapper functions with actual spin lock function
* Replaced all the spin lock/unlock wrappers from oz_polling_lock_bh()
and oz_polllin_unlock_bh() with spin_lock_bh(&g_polling_lock) and
spin_unlock_bh(&g_polling_lock).Completely erased the wrappers defination
and declaration.
* declared g_polling_lock as global variable in header file and added comments to it.
Module builded successfully with sparse without warnings.
Aaro Koskinen [Sat, 1 Mar 2014 22:09:05 +0000 (00:09 +0200)]
staging: octeon-ethernet: drop CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS
We don't have such Kconfig option, so the current code is dead and
the documentation is wrong. Users can adjust this setting by using
module parameter or kernel command line, so we can delete this code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core expects the (*insn_write) functions to write insn->n
values. Fix this function to work like the core expects.
The counters are actually 25-bit (24-bits + 1 sign bit). The comedi core
validates that all the data is in range before calling the (*insn_write),
fix the subdevice maxdata so that the sign bit can actually be changed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is only used in the pci_device_id table and does not add
any significant clarity to the code. Remove the define and just open
code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shaun Laing [Tue, 4 Mar 2014 19:44:21 +0000 (12:44 -0700)]
staging: cxt1e1: Add extern keyword for sparse 'static' warning
Resolve sparse "warning: symbol '...' was not declared. Should it be static?"
messages. Includes "comet_tables.h", which contains extern declarations for
the variables defined in comet_tables.c.
Masood Mehmood [Sat, 1 Mar 2014 11:57:02 +0000 (03:57 -0800)]
Staging:tidspbridge: Fixed braces, spaces and long line coding style
This patch applies following code style changes to the whole driver.
- Removing braces from single statements following a 'if' statement.
- Removing unnessasary spaces and braces from files.
- Re-order statements crossing 80 columns limitation.
- Fixed one quoted string split across lines.
Shuah Khan [Mon, 3 Mar 2014 23:38:45 +0000 (16:38 -0700)]
staging/usbip: change usbip userspace to include new uapi usbip.h
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
userspace to include uapi usbip.h for usbip device status.
Shuah Khan [Mon, 3 Mar 2014 23:38:44 +0000 (16:38 -0700)]
staging/usbip: change usbip to include new uapi usbip.h
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
kernel space to include uapi usbip.h for usbip device status.
Shuah Khan [Mon, 3 Mar 2014 23:38:43 +0000 (16:38 -0700)]
staging/usbip: add uapi header to export usbip kernel interfaces
usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. Adding an usbip uapi header file will
define the kernel - userspace interface for this device status. This
new uapi file is added under usbip/uapi to keep the staging tree code
self-contained. When usbip moves to mainline drivers, this file should
be moved under uapi/linux
Linus Torvalds [Sun, 2 Mar 2014 23:15:07 +0000 (15:15 -0800)]
Merge tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 2 USB patches for 3.14-rc5, one a new device id, and the
other fixes a reported problem with threaded irqs and the USB EHCI
driver"
* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ehci: fix deadlock when threadirqs option is used
USB: ftdi_sio: add Cressi Leonardo PID
Linus Torvalds [Sun, 2 Mar 2014 23:12:54 +0000 (15:12 -0800)]
Merge tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are a few IIO fixes, and a new device id for a staging driver for
3.14-rc5. All have been in linux-next for a while, I did a final
merge to get the IIO fixes into this tree, they were incorrectly in
the char-misc tree for a few weeks, and I forgot to tell you to pull
them from there. This makes it a single pull request for you"
* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
iio:gyro: bug on L3GD20H gyroscope support
iio: cm32181: Change cm32181 ambient light sensor driver
iio: cm36651: Fix read/write integration time function.
Dave Airlie [Sun, 2 Mar 2014 23:04:41 +0000 (09:04 +1000)]
Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
more radeon fixes
* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: enable speaker allocation setup on dce3.2
drm/radeon: change audio enable logic
drm/radeon: fix audio disable on dce6+
drm/radeon: free uvd ring on unload
drm/radeon: disable pll sharing for DP on DCE4.1
drm/radeon: fix missing bo reservation
drm/radeon: print the supported atpx function mask
Dave Airlie [Sun, 2 Mar 2014 10:54:31 +0000 (20:54 +1000)]
Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of minor fixes.
Pull request of 2014-03-02
* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: avoid null pointer dereference at failure paths
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
drm/vmwgfx: Remove some unused surface formats
drm/vmwgfx: avoid null pointer dereference at failure paths
vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Fri, 28 Feb 2014 12:33:21 +0000 (13:33 +0100)]
drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.
Also update driver date.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
Linus Torvalds [Sun, 2 Mar 2014 04:48:14 +0000 (22:48 -0600)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"The VMCOREINFO patch I'll pushing for this release to avoid having a
release with kASLR and but without that information.
I was hoping to include the FPU patches from Suresh, but ran into a
problem (see other thread); will try to make them happen next week"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kaslr: add missed "static" declarations
x86, kaslr: export offset in VMCOREINFO ELF notes
Pull SCSI target fixes from Nicholas Bellinger:
"The bulk of the series are bugfixes for qla2xxx target NPIV support
that went in for v3.14-rc1. Also included are a few DIF related
fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
protocol version related fix from Venkatesh.
Also just a heads up that a series to address a number of issues with
iser-target active I/O reset/shutdown is still being tested, and will
be included in a separate -rc6 PULL request"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
qla2xxx: Fix kernel panic on selective retransmission request
Target/sbc: Don't use sg as iterator in sbc_verify_read
target: Add DIF sense codes in transport_generic_request_failure
target/sbc: Fix sbc_dif_copy_prot addr offset bug
tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
qla2xxx: Fix qlt_lport_register base_vha callback race
Linus Torvalds [Sun, 2 Mar 2014 03:30:43 +0000 (21:30 -0600)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma fixes from Vinod Koul:
"This request brings you two small fixes. First one for fixing
dereference of freed descriptor and second for fixing sdma bindings
for it to work for imx25.
I was planning to send this about 10days ago but then I had to proceed
on my paternity leave and didnt get chance to send this. Now got a
bit of time from dady duties :)"
Linus Torvalds [Sun, 2 Mar 2014 03:28:38 +0000 (21:28 -0600)]
Merge tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These three commits fix a recent intel_pstate regression and two old
bugs that should be fixed in -stable too, one in the ACPI processor
driver and one in the firmare loader.
Specifics:
- One of the recent intel_pstate driver fixes introduced a rounding
error that on some systems causes the frequency to be stuck at the
lowest level forever. Fix from Dirk Brandewie.
- The firmware_class driver's PM notifier doesn't handle the
PM_RESTORE_PREPARE event during hibernation image restore and that
leads to a deadlock on umhelper_sem in __usermodehelper_disable().
Fix from Sebastian Capella.
- acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
among other things. Fix from Lan Tianyu"
* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Rework processor throttling with work_on_cpu()
PM / hibernate: Fix restore hang in freeze_processes()
intel_pstate: Change busy calculation to use fixed point math.
Liang Zhen [Sat, 1 Mar 2014 02:16:40 +0000 (21:16 -0500)]
lustre/ptlrpc: rq_commit_cb is called for twice
If a ptlrpc_request is already on imp::imp_replay_list, when it's
replayed and replied, after_reply() will call req::rq_commit_cb
for the request, then call it again in ptlrpc_free_committed.
Peng Tao [Sat, 1 Mar 2014 02:16:41 +0000 (21:16 -0500)]
lustre/ptlrpc: skip rpcs that fail ptl_send_rpc
ptl_send_rpc is not dealing with -ENOMEM in some
situations. When the ptl_send_rpc fails we need
set error and skip further processing or trigger
and LBUG
Signed-off-by: Keith Mannthey <keith.mannthey@intel.com> Signed-off-by: Peng Tao <bergwolf@gmail.com>
Reviewed-on: http://review.whamcloud.com/7411
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3698 Reviewed-by: Mike Pershin <mike.pershin@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Sat, 1 Mar 2014 02:16:43 +0000 (21:16 -0500)]
lustre/ptlrpc: re-enqueue ptlrpcd worker
osc_extent_wait can be stuck in scenario like this:
1) thread-1 held an active extent
2) thread-2 called flush cache, and marked this extent as "urgent"
and "sync_wait"
3) thread-3 wants to write to the same extent, osc_extent_find will
get "conflict" because this extent is "sync_wait", so it starts
to wait...
4) cl_writeback_work has been scheduled by thread-4 to write some
other extents, it has sent RPCs but not returned yet.
5) thread-1 finished his work, and called osc_extent_release()->
osc_io_unplug_async()->ptlrpcd_queue_work(), but found
cl_writeback_work is still running, so it's ignored (-EBUSY)
6) thread-3 is stuck because nobody will wake him up.
This patch allows ptlrpcd_work to be rescheduled, so it will not
miss request anymore
Fix 'data race condition' defects found by Coverity version
6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.
Ann Koehler [Sat, 1 Mar 2014 02:16:44 +0000 (21:16 -0500)]
lustre/osc: Don't flush active extents.
The extent is active so we need to abort and let the caller
re-dirty the page. If we continued on here, and we were the
one making the extent active, we could deadlock waiting for
the page writeback to clear but it won't because the extent
is active and won't be written out.
Oleg Drokin [Sat, 1 Mar 2014 02:16:46 +0000 (21:16 -0500)]
lustre/libcfs: warn if all HTs in a core are gone
libcfs cpu partition can't support CPU hotplug, but it is safe
when plug-in new CPU or enabling/disabling hyper-threading.
It has potential risk only if plug-out CPU because it may break CPU
affinity of Lustre threads.
Current libcfs will print warning for all CPU notification, this
patch changed this behavior and only output warning when we lost all
HTs in a CPU core which may have broken affinity of Lustre threads.
Lai Siyao [Sat, 1 Mar 2014 02:16:38 +0000 (21:16 -0500)]
lustre/llite: simplify dentry revalidate
Lustre client dentry validation is protected by LDLM lock, so
any time a dentry is found, it's valid and no need to revalidate
from MDS, and even it does, there is race that it may be
invalidated after revalidation is finished.
Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-on: http://review.whamcloud.com/7475
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544 Reviewed-by: Peng Tao <bergwolf@gmail.com> Reviewed-by: Bob Glossman <bob.glossman@intel.com> Reviewed-by: John L. Hammond <john.hammond@intel.com> Reviewed-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hongchao Zhang [Sat, 1 Mar 2014 02:16:37 +0000 (21:16 -0500)]
lustre/recovery: free open/close request promptly
- For the non-create open or committed open, the open request
should be freed along with the close request as soon as the
close done, despite that the transno of open/close is
greater than the last committed transno known by client or not.
- Move the committed open request into another dedicated list,
that will avoid scanning a huge replay list on receiving each
reply (when there are many open files).
John L. Hammond [Sat, 1 Mar 2014 02:16:36 +0000 (21:16 -0500)]
lustre/mdc: fix bad ERR_PTR usage in mdc_locks.c
In mdc_intent_open_pack() return an ERR_PTR() rather than NULL when
ldlm_prep_enqueue_req() fails. In mdc_intent_getattr_async() check the
return value of mdc_intent_getattr_pack() using IS_ERR(). Clean up the
includes in mdc_locks.c.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7886
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4078 Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John L. Hammond [Sat, 1 Mar 2014 02:16:35 +0000 (21:16 -0500)]
lustre/clio: honor O_NOATIME
Add a ci_noatime bit to struct cl_io. In ll_io_init() set this bit if
O_NOATIME is set in f_flags. Ensure that this bit is propagated down
to lower layers. In osc_io_read_start() don't update atime if this bit
is set. Add sanity test 39n to check that passing O_NOATIME to open()
is honored.
Alexey Lyashkov [Sat, 1 Mar 2014 02:16:34 +0000 (21:16 -0500)]
lustre/mdc: use ibits_known mask for lock match
Before revalidating a lock on the client, mask the lock bits against
the lock bits supported by the server (ibits_known), so newer clients
will find valid locks given by older server versions.
Oleg Drokin [Sat, 1 Mar 2014 02:16:32 +0000 (21:16 -0500)]
lustre/llite: Do not send parent dir fid in getattr by fid
Sending getattr by fid in this case is pointless, as the parent
might havelong changed and we have no control over it, but it's
irrelevant anyway, since we already have the child fid.
John L. Hammond [Sat, 1 Mar 2014 02:16:30 +0000 (21:16 -0500)]
staging/lustre/llite: fix open lock matching in ll_md_blocking_ast()
In ll_md_blocking_ast() match open locks before all others, ensuring
that MDS_INODELOCK_OPEN is not cleared from bits by another open lock
with a different mode. Change the int flags parameter of
ll_md_real_close() to fmode_t fmode. Clean up verious style issues in
both functions.
Merge tag 'fixes-for-3.14d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Fourth set of IIO fixes for the 3.14 kernel.
A single line patch fixing a regression that was introduced in 3.13 in the
reworking of the mxs touch screen and ADC drivers to be interrupt rather
than polling driven. It resulted in a stray double reporting of the release
coordinate in the touch screen driver. The bug lay in the adc side
of the driver which left the statemachine in the wrong state.
Fabio Estevam [Fri, 28 Feb 2014 14:39:42 +0000 (11:39 -0300)]
imx-drm: imx-ldb: Use snprintf()
Use snprintf() in order to fix the following static checker warning:
drivers/staging/imx-drm/imx-ldb.c:340 imx_ldb_get_clk() error: format string overflow. buf_size: 16 length: 18
probably 18 is theory and not real life, but 16 is based on
theory as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chase Southwood [Fri, 28 Feb 2014 07:30:45 +0000 (01:30 -0600)]
Staging: comedi: addi-data: remove unnecessary variable initializations in hwdrv_apci035.c
Nearly every variable in hwdrv_apci035.c is initialized to 0 when it is
declared, and then set to some other value before ever being used. As
such, we can remove all of these initializations. They are accomplishing
nothing.
It's been marked BROKEN for over a year, and no one has stepped up to do
anything with the code, and no one has complained. So just delete it.
If someone wants to fix it up and merge it "properly", they can revert
this commit.
projects / mirror_ubuntu-hirsute-kernel.git / log