Daniel Mack [Tue, 27 Apr 2010 10:24:42 +0000 (12:24 +0200)]
ARM: mx3: Fix a race condition in mxcmmc
From cefcdab08d1c9636c4a7290bc2bbe937d051bce4 Mon Sep 17 00:00:00 2001
From: Volker Ernst <volker.ernst@txtr.com>
Date: Mon, 26 Apr 2010 22:51:07 +0200
Subject: [PATCH] ARM: mx3: Fix a race condition in mxcmmc
This fixes a race condition regarding interrupt bits in the SDHC
controller driver code.
In case of PIO-transfer it does not clear SDHC-status bit#11/12
in the INT-handler anymore. INT-handler might be called during
an ongoing PIO-data-transfer (with some other INT-flag set) and
PIO-transfer depends on these bits being set to detect the end
of the data-transfer. This also means that at the end of PIO-
transfer that PIO-software has to clear these bits itself.
However in case of DMA-transfer these bits have to be cleared
in the INT-handler, because they are used to generate INTs then.
Works solid, no more problems here, can transfer big files.
Signed-off-by: Volker Ernst <volker.ernst@txtr.com> Acked-by: Daniel Mack <daniel@caiaq.de> Cc: Andy Green <andy@warmcat.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Dinh Nguyen [Mon, 10 May 2010 18:45:59 +0000 (13:45 -0500)]
mx5: enable usb gadget for freescale mx51 babbage board
This patch enables usb gadget for freescale mx51 babbage hw. By default,
the OTG port will be in device mode. To put the OTG port into Host mode,
pass "otg_mode=host" in the exec command.
This patch adds USB HW initializiation code to /plat-mxc/ehci.c.
-Sets some specific PHY settings
Renames mxc_set_usbcontrol to mxc_initialize_usb_hw.
Adds new register bit defines for the USB HW on Freescale
SoCs.
mx5: Enable board specific functions for enabling USB host on Babbage
This patch enables USB host functionality for Host1 and OTG port on
Freescale MX51 Babbage HW. This patch contains the board specific
HW initialization of the USB HW.
mx5: Add USB device definitions for Freescale MX51 Babbage HW
This patch is part of enabling USB for Freescale MX51 Babbage HW. This
patch adds device structures for USB Host1 and OTG port, and adds
clocking information for USB HW.
mxc: Update GPIO for USB support on Freescale MX51 Babbage HW
This patch is part of enabling USB for Freescale MX51 Babbage HW. This
patch updates the iomux pins for USB, and gpio line for reset the
USB hub on the MX51 Babbage HW.
Daniel Mack [Thu, 1 Apr 2010 08:03:25 +0000 (10:03 +0200)]
ARM: MXC: mxcmmc: work around a bug in the SDHC busy line handling
MX3 SoCs have a silicon bug which corrupts CRC calculation of
multi-block transfers when connected SDIO peripheral doesn't drive the
BUSY line as required by the specs.
One way to prevent this is to only allow 1-bit transfers.
Another way is playing tricks with the DMA engine, but this isn't
mainline yet. So for now, we live with the performance drawback of 1-bit
transfers until a nicer solution is found.
This patch introduces a new host controller callback 'init_card' which
is for now only called from mmc_sdio_init_card().
Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ivo Clarysse [Thu, 8 Apr 2010 14:16:51 +0000 (16:16 +0200)]
MXC: mxc_nand: support i.MX21
On i.MX21 SoCs, if the NFC_CONFIG1:NFC_INT_MASK bit is set,
NFC_CONFIG2:NFC_INT always reads out zero, even if an
operation is completed. This patch uses enable_irq and
disable_irq_nosync instead of NFC_CONFIG1:NFC_INT_MASK to
mask NFC interrupts. This allows NFC_CONFIG2:NFC_INT to also
be used to detect operation completion on i.MX21.
The i.MX21 NFC does not signal reset completion using
NFC_CONFIG1:NFC_INT_MASK, so instead reset completion is
tested by checking if NFC_CONFIG2 becomes 0.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ivo Clarysse [Thu, 8 Apr 2010 14:14:44 +0000 (16:14 +0200)]
MXC: mxc_nand: set NFC registers after reset
This patch allows the mxc_nand driver to reset the NAND
flash controller. NFC registers are (re-)set after
completion of the reset, as a reset will have reverted
the NFC registers to their default values.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFSv4: fix delegated locking
NFS: Ensure that the WRITE and COMMIT RPC calls are always uninterruptible
NFS: Fix a race with the new commit code
NFS: Ensure that writeback_single_inode() calls write_inode() when syncing
NFS: Fix the mode calculation in nfs_find_open_context
NFSv4: Fall back to ordinary lookup if nfs4_atomic_open() returns EISDIR
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Add some more commentary to __raw_local_irq_save()
sparc64: Fix memory leak in pci_register_iommu_region().
sparc64: Add kmemleak annotation to sun4v_build_virq()
sparc64: Support kmemleak.
sparc64: Add function graph tracer support.
sparc64: Give a stack frame to the ftrace call sites.
sparc64: Use a seperate counter for timer interrupts and NMI checks, like x86.
sparc64: Remove profiling from some low-level bits.
sparc64: Kill unnecessary static on local var in ftrace_call_replace().
sparc64: Kill CONFIG_STACK_DEBUG code.
sparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up.
sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs.
sparc64: Use kstack_valid() in die_if_kernel().
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
smc91c92_cs: define multicast_table as unsigned char
can: avoids a false warning
e1000e: stop cleaning when we reach tx_ring->next_to_use
igb: restrict WoL for 82576 ET2 Quad Port Server Adapter
virtio_net: missing sg_init_table
Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"
iwlwifi: need check for valid qos packet before free
tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb
udp: fix for unicast RX path optimization
myri10ge: fix rx_pause in myri10ge_set_pauseparam
net: corrected documentation for hardware time stamping
stmmac: use resource_size()
x.25 attempts to negotiate invalid throughput
x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.
bridge: Fix IGMP3 report parsing
cnic: Fix crash during bnx2x MTU change.
qlcnic: fix set mac addr
r6040: fix r6040_multicast_list
vhost-net: fix vq_memory_access_ok error checking
ath9k: fix double calls to ath_radio_enable
...
Eric Dumazet [Fri, 9 Apr 2010 23:47:31 +0000 (23:47 +0000)]
can: avoids a false warning
At this point optlen == sizeof(sfilter) but some compilers are dumb.
Reported-by: Németh Márton <nm127@freemail.h Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Terry Loftin [Fri, 9 Apr 2010 10:29:49 +0000 (10:29 +0000)]
e1000e: stop cleaning when we reach tx_ring->next_to_use
Tx ring buffers after tx_ring->next_to_use are volatile and could
change, possibly causing a crash. Stop cleaning when we hit
tx_ring->next_to_use.
Signed-off-by: Terry Loftin <terry.loftin@hp.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Assmann [Fri, 9 Apr 2010 09:51:34 +0000 (09:51 +0000)]
igb: restrict WoL for 82576 ET2 Quad Port Server Adapter
Restrict Wake-on-LAN to first port on 82576 ET2 quad port NICs, as it is
only supported there.
Signed-off-by: Stefan Assmann <sassmann@redhat.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 11 Apr 2010 03:26:55 +0000 (20:26 -0700)]
sparc64: Fix memory leak in pci_register_iommu_region().
Found by kmemleak.
If request_resource() fails, we leak the struct resource we
allocated to represent the IOMMU mapping area.
This actually happens on sun4v machines because the IOMEM area is only
reported sans the IOMMU region, unlike all previous systems. I'll
need to fix that at some point, but for now fix the leak.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 11 Apr 2010 03:24:22 +0000 (20:24 -0700)]
sparc64: Add kmemleak annotation to sun4v_build_virq()
The only reference we store to this memory is in the form of a
physical address, so kmemleak can't see it.
Add a kmemleak_not_leak() annotation.
It's probably useful to be able to look at a dump of these things
either via debugfs or similar, and thus we could at some point store
them in some kind of table and therefore get rid of this annotation.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 13 Apr 2010 05:21:52 +0000 (22:21 -0700)]
sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs.
If we are in an NMI then doing a plain raw_local_irq_disable() will
write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus
we'll re-enable NMIs and recurse.
Doing a simple:
%pil = %pil | PIL_NORMAL_MAX
does what we want, if we're already at PIL_NMI (15) we leave it at
that setting, else we set it to PIL_NORMAL_MAX (14).
This should get the function tracer working on sparc64.
Signed-off-by: David S. Miller <davem@davemloft.net>
Shirley Ma [Mon, 29 Mar 2010 15:19:15 +0000 (15:19 +0000)]
virtio_net: missing sg_init_table
Add missing sg_init_table for sg_set_buf in virtio_net which
induced in defer skb patch.
Reported-by: Thomas Müller <thomas@mathtm.de> Tested-by: Thomas Müller <thomas@mathtm.de> Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* anonvma:
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma
anon_vma: clone the anon_vma chain in the right order
vma_adjust: fix the copying of anon_vma chains
Simplify and comment on anon_vma re-use for anon_vma_prepare()
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits)
ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
ARM: 6031/1: fix Thumb-2 decompressor
ARM: 6029/1: ep93xx: gpio.c: local functions should be static
ARM: 6028/1: ARM: add MAINTAINERS for U300
ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c
MXC: mach_armadillo5x0: Add USB Host support.
ARM mach-mx3: duplicated include
ARM mach-mx3: duplicated include
imx31: add watchdog device on litekit board.
imx3: Add watchdog platform device support
MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.
MXC: mach-mx31_3ds: Add SPI1 device support.
MXC: mach-mx31_3ds: Add support for on board NAND Flash.
MXC: mach-mx31_3ds: Update variable names over recent mach name modification.
imx31: fix parent clock for rtc
i.MX51: remove NFC AXI static mapping
i.MX51: determine silicon revision dynamically
i.MX51: map TZIC dynamically
i.MX51: Use correct clock for gpt
...
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: make sure the chunk allocator doesn't create zero length chunks
Btrfs: fix data enospc check overflow
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Fix possible dq_flags corruption
quota: Hide warnings about writes to the filesystem before quota was turned on
ext3: symlink must be handled via filesystem specific operation
ext2: symlink must be handled via filesystem specific operation
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits)
MIPS: Calculate proper ebase value for 64-bit kernels
MIPS: Alchemy: DB1200: Remove custom wait implementation
MIPS: Big Sur: Make defconfig more useful.
MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules
MIPS: Sibyte: Fix M3 TLB exception handler workaround.
MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
MIPS: uasm: Add OR instruction.
MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.
MIPS: BCM63xx: Add support for second uart.
MIPS: BCM63xx: Fix double gpio registration.
MIPS: BCM63xx: Add DWVS0 board
MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.
MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count
MIPS: libgcc.h: Checkpatch cleanup
MIPS: Loongson-2F: Flush the branch target history in BTB and RAS
MIPS: Move signal trampolines off of the stack.
MIPS: Preliminary VDSO
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix typo "numer" -> "number" in alloc.c
nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
nilfs2: fix a wrong type conversion in nilfs_ioctl()
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma
Otherwise we might be mapping in a page in a new mapping, but that page
(through the swapcache) would later be mapped into an old mapping too.
The page->mapping must be the case that works for everybody, not just
the mapping that happened to page it in first.
Here's the scenario:
- page gets allocated/mapped by process A. Let's call the anon_vma we
associate the page with 'A' to keep it easy to track.
- Process A forks, creating process B. The anon_vma in B is 'B', and has
a chain that looks like 'B' -> 'A'. Everything is fine.
- Swapping happens. The page (with mapping pointing to 'A') gets swapped
out (perhaps not to disk - it's enough to assume that it's just not
mapped any more, and lives entirely in the swap-cache)
In particular, what happens is that this will now be the "first"
mapping of that page, so page_add_anon_rmap() used to do
if (first)
__page_set_anon_rmap(page, vma, address);
and notice what anon_vma it will use? It will use the anon_vma for
process B!
What happens then? Trivial: process 'A' also pages it in (nothing
happens, it's not the first mapping), and then process 'B' execve's
or exits or unmaps, making anon_vma B go away.
End result: process A has a page that points to anon_vma B, but
anon_vma B does not exist any more. This can go on forever. Forget
about RCU grace periods, forget about locking, forget anything like
that. The bug is simply that page->mapping points to an anon_vma
that was correct at one point, but was _not_ the one that was shared
by all users of that possible mapping.
Changing it to always use the deepest anon_vma in the anonvma chain gets
us to the safest model.
This can be improved in certain cases: if we know the page is private to
just this particular mapping (for example, it's a new page, or it is the
only swapcache entry), we could pick the top (most specific) anon_vma.
But that's a future optimization. Make it _work_ reliably first.
Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
anon_vma: clone the anon_vma chain in the right order
We want to walk the chain in reverse order when cloning it, so that the
order of the result chain will be the same as the order in the source
chain. When we add entries to the chain, they go at the head of the
chain, so we want to add the source head last.
Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "No, it still oopses" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we move the boundaries between two vma's due to things like
mprotect, we need to make sure that the anon_vma of the pages that got
moved from one vma to another gets properly copied around. And that was
not always the case, in this rather hard-to-follow code sequence.
Clarify the code, and fix it so that it copies the anon_vma from the
right source.
Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "Yeah, not so much this one either" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify and comment on anon_vma re-use for anon_vma_prepare()
This changes the anon_vma reuse case to require that we only reuse
simple anon_vma's - ie the case when the vma only has a single anon_vma
associated with it.
This means that a reuse of an anon_vma from an adjacent vma will always
guarantee that both vma's are associated not only with the same
anon_vma, they will also have the same anon_vma chain (of just a single
entry in this case).
And since anon_vma re-use was the only case where the same anon_vma
might be associated with different chains of anon_vma's, we now have the
case that every vma that shares the same anon_vma will always also have
the same chain. That makes it much easier to think about merging vma's
that share the same anon_vma's: you can always just drop the other
anon_vma chain in anon_vma_merge() since you know that they are always
identical.
This also splits up the function to validate the anon_vma re-use, and
adds a lot of commentary about the possible races.
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty. Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.
Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara [Tue, 6 Apr 2010 16:52:47 +0000 (18:52 +0200)]
quota: Hide warnings about writes to the filesystem before quota was turned on
For a root filesystem write to the filesystem before quota is turned on happens
regularly and there's no way around it because of writes to syslog, /etc/mtab,
and similar. So the warning is rather pointless for ordinary users. It's
still useful during development so we just hide the warning behind
__DQUOT_PARANOIA config option.
David Daney [Tue, 6 Apr 2010 20:29:50 +0000 (13:29 -0700)]
MIPS: Calculate proper ebase value for 64-bit kernels
The ebase is relative to CKSEG0 not CAC_BASE. On a 32-bit kernel they
are the same thing, for a 64-bit kernel they are not.
It happens to kind of work on a 64-bit kernel as they both reference
the same physical memory. However since the CPU uses the CKSEG0 base,
determining if a J instruction will reach always gives the wrong result
unless we use the same number the CPU uses.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.
Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All those functions are EXPORT_SYMBOL() so are meant to be allowed to be
used by non-GPL kernel modules. These calls all take page protection as
an argument which is normally a constant like PAGE_KERNEL.
This commit causes all protection constants like PAGE_KERNEL to not be
constants and instead to contain the GPL-only symbol _page_cachable_default.
This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL
modules to fail to link with the complaint that they are trying to use the
GPL-only symbol _page_cachable_default...
Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for
non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Cc: Chris Dearman <chris@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1084/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Tue, 23 Mar 2010 09:30:08 +0000 (10:30 +0100)]
MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below. Move the variables and functions above
board_prom_init.
Ralf Baechle [Mon, 22 Mar 2010 23:02:43 +0000 (00:02 +0100)]
MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
Previously it was unconditionally used on all Sibyte family SOCs. The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment. This is important as required changes to the
M3 workaround will make it more costly.
Maxime Bizon [Sat, 30 Jan 2010 17:34:55 +0000 (18:34 +0100)]
MIPS: BCM63xx: Add support for second uart.
The BCm63xx SOC has two uarts. Some boards use the second one for
bluetooth. This patch changes platform device registration code to
handle this. Changes to the UART driver were already merged in 6a2c7eabfd09ca7986bf96b8958a87ca041a19d8.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/900/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Sat, 13 Mar 2010 04:34:15 +0000 (12:34 +0800)]
MIPS: Loongson-2F: Flush the branch target history in BTB and RAS
As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work
around the Loongson 2F erratum we need to do:
"When switching from user mode to kernel mode, you should flush the
branch target history such as BTB and RAS."
[1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211
[2] English version of chapter 15:
http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source
David Daney [Fri, 19 Feb 2010 00:13:05 +0000 (16:13 -0800)]
MIPS: Move signal trampolines off of the stack.
This is a follow on to the vdso patch.
Since all processes now have signal trampolines permanently mapped, we
can use those instead of putting the trampoline on the stack and
invalidating the corresponding icache across all CPUs. We also get rid
of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code.
[Ralf: GDB 7.1 which has the necessary modifications to allow backtracing
over signal frames will supposedly be released tomorrow. The old signal
frame format obsoleted by this patch exists in two variations, for sane
processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR. So
there was never a GDB which did support backtracing over signal frames
on all MIPS systems. This convinved me this series should be applied and
pushed upstream as soon as possible.]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/974/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 19 Feb 2010 00:13:04 +0000 (16:13 -0800)]
MIPS: Preliminary VDSO
This is a preliminary patch to add a vdso to all user processes. Still
missing are ELF headers and .eh_frame information. But it is enough to
allow us to move signal trampolines off of the stack. Note that emulation
of branch delay slots in the FPU emulator still requires the stack.
We allocate a single page (the vdso) and write all possible signal
trampolines into it. The stack is moved down by one page and the vdso is
mapped into this space.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/975/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Andreas Ferber [Tue, 16 Mar 2010 11:35:51 +0000 (12:35 +0100)]
MIPS: Fix SSB PCIcore IO resource management
The SSB PCIcore code reused the IO resource fixup code from the original
2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack
for doing PCI IO resource configuration back then (the boot loader
doesn't configure PCI devices on this platform).
However, this code is no longer necessary since the kernel now can do
PCI resource management fine all by itself, so remove the old code.
When removing the code, it becomes obvious that the mem_offset setting
in the PCIcore driver was wrong, however this was masked by the fixup
code before, except in a few cases involving yenta_socket. For BCM47xx,
the correct offset is 0, and since this is the only device using PCIcore
in host mode, the offset can simply be removed unconditionally.
Signed-off-by: Andreas Ferber <af@chaos-agency.de> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Markus Wigge <markus@cultcom.de> Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Wed, 10 Mar 2010 08:51:09 +0000 (09:51 +0100)]
MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET
On AR7, we already redefine PHYS_OFFSET to match the system specifities, it
is however not sufficient when unsing dma_{map,unmap}_single, specifically
in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA
to work correctly. This patch fixes the following issue, seen in cpmac_open:
Robert P. J. Day [Sat, 27 Feb 2010 17:02:51 +0000 (12:02 -0500)]
MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1008/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Thu, 11 Mar 2010 07:48:14 +0000 (08:48 +0100)]
MIPS: Fix elfcore.c build warning
kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>. In
<asm/elf.h>, struct pt_regs is declared inside the parameter list of the
elf_dump_regs function which causes a kernel build warning.
Fixed by adding a forward declaration of struct pt_regs.
Yang Shi [Wed, 3 Mar 2010 08:43:20 +0000 (16:43 +0800)]
MIPS: Octeon: Remove redundant declaration of octeon_reserve32_memory
octeon_reserve32_memory is defined In Octeon's setup.c, so remove the
redundant extern declaration of this variable.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
To: f.fainelli@gmail.com Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1022/ Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wu Zhangjin [Tue, 9 Mar 2010 16:27:28 +0000 (00:27 +0800)]
MIPS: Trace: Don't trace irqsoff for the idle process
Like x86 did in arch/x86/kernel/{process_32.c,process_64.c}, also don't
trace irqsoff for idle.
If there's no useful work to be done, we don't care about the irqsoff
duration. If we trace the idle process, the max duration of irqsoff will
be the idle time and make the irqsoff tracer useless.
projects / mirror_ubuntu-jammy-kernel.git / log