Staging: drivers: Bool initializations should use true/false
This patch replaces bool initializations of 1/0 with true/false in order
to increase readability and respect the standards. Warning found by
coccinelle.
This patch removes if conditions with no exececutable
statements in the bodies of those ifs and also no variable
assignments in the if conditional checks. The call to
rtllib_act_scanning in the condition doesn't have any side
effects as it too performs conditional checks without changing
any values. Hence, it's safe to remove the if condition.
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 07:00:02 +0000 (09:00 +0200)]
staging: rtl8712: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that defines the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
Aya Mahfouz [Wed, 4 Mar 2015 06:56:45 +0000 (08:56 +0200)]
staging: rtl8188eu: replace memset(x,0,ETH_ALEN)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that define the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
Aya Mahfouz [Wed, 4 Mar 2015 06:20:14 +0000 (08:20 +0200)]
staging: unisys: virthba: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:50 +0000 (08:19 +0200)]
staging: slicoss: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:19:24 +0000 (08:19 +0200)]
staging: rts5208: remove extra parentheses around left bit shift operation
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:47 +0000 (08:18 +0200)]
staging: ozwpan: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The case handled is when resultant value is assigned to a variable.
The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 06:18:19 +0000 (08:18 +0200)]
staging: lustre: remove extra parentheses around left bit shift operations
Removes extra parentheses around bitwise left shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
<<
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
<<
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
<<
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:48 +0000 (07:35 +0200)]
staging: xgifb: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:35:28 +0000 (07:35 +0200)]
staging: speakup: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:52 +0000 (07:34 +0200)]
staging: slicoss: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:34:07 +0000 (07:34 +0200)]
staging: rtl8723au: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:39 +0000 (07:33 +0200)]
staging: rtl8712: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:33:06 +0000 (07:33 +0200)]
staging: rtl8192u: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:32:30 +0000 (07:32 +0200)]
staging: rtl8192e: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The cases handled are when the resultant value is assigned to
a variable or when a shift operation is carried out for a function
argument. The issues were detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Some coding style issues were handled manually to avoid
checkpatch warnings and errors.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:56 +0000 (07:31 +0200)]
staging: rtl8188eu: remove extra parentheses around right bit shift operations
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when resultant values are assigned to
variables. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:31:19 +0000 (07:31 +0200)]
staging: media: lirc: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:49 +0000 (07:30 +0200)]
staging: media: bcm2048: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:30:18 +0000 (07:30 +0200)]
staging: lustre: llite: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operation.
The case handled here is when the resultant value is assigned to
a variable. The issue was detected and resolved using the following
coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Mahfouz [Wed, 4 Mar 2015 05:29:28 +0000 (07:29 +0200)]
staging: lustre: lclient: remove extra parentheses around right bit shift operation
Removes extra parentheses around bitwise right shift operations.
The cases handled here are when the resultant value is assigned
to a variable. The issue was detected and resolved using the
following coccinelle script:
@@
expression e, e1;
constant c;
@@
e =
-(e1
+e1
>>
-c);
+c;
@@
identifier i;
constant c;
type t;
expression e;
@@
t i =
-(e
+e
>>
-c);
+c;
@@
expression e, e1;
identifier f;
constant c;
@@
e1 = f(...,
-(e
+e
>>
-c)
+c
,...);
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of API function setup_timer
instead of driver specific function _init_timer as it is
the preferred and standard way to setup and set the timer.
To be compatible with the change, argument types of
referenced functions are changed. Also, definition of
function _init_timer is removed as it is no longer needed
after this change.
This is done using Coccinelle and semantic patch used for
this is as follows:
@@ expression x, y; identifier a, b;@@
- _init_timer (&x, y, a, b);
+ setup_timer (&x, a, (unsigned long)b);
Aya Mahfouz [Tue, 3 Mar 2015 14:08:38 +0000 (16:08 +0200)]
staging: rtl8192u: ieee80211: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
Aya Mahfouz [Tue, 3 Mar 2015 14:06:19 +0000 (16:06 +0200)]
staging: rtl8192u: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
Aya Mahfouz [Tue, 3 Mar 2015 14:04:20 +0000 (16:04 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
Aya Mahfouz [Tue, 3 Mar 2015 14:03:35 +0000 (16:03 +0200)]
staging: rtl8192e: replace memset(x,0,ETH_ALEN) by eth_zero_addr(x)
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The replacement was done by the
following coccinelle script:
Aya Mahfouz [Tue, 3 Mar 2015 14:27:37 +0000 (16:27 +0200)]
staging: iio: meter: add check on return variables
adds checks on variables that are used to return values. If
the value is less than zero, this indicates that an error
occurred and hence a message is printed through dev_err.
Checks are made on negative values only since spi_* functions
return negative error codes.
The functions were found using the following script but the
aforementioned modification was what was carried out in the end:
@@
identifier len,f;
@@
-int len;
... when != len
when strict
-len =
+return
f(...);
-return len;
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a if condition which has a semicolon
after it. As the conditional check is redundant, the comment
before it is also changed. The following
coccinelle script was used to detect the pattern of a
semicolon after if.
@r1@
position p;
@@
if (...);@p
@script:python@
p0 << r1.p;
@@
// Emacs org-mode output
cocci.print_main("", p0)
cocci.print_secs("", p0)
Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Johnson [Mon, 2 Mar 2015 18:10:26 +0000 (23:40 +0530)]
staging: lustre: lustre: libcfs: Replaced printk() with pr_err() and pr_cont()
The following checkpatch warning was fixed:
Prefer [subsystem eg: netdev]_err([subsystem]dev
with the help of Coccinelle. pr_cont() was used to replace those printk
statements which followed a printk that did not end with a '\n'. The following
semantic patch was used to replace printk() with pr_err():
@a@
expression e;
@@
printk(e,...);
@script:python b@
e << a.e;
y;
@@
import re
match = re.match('KERN_ERR ', e);
if (match == None):
cocci.include_match(False)
else:
m = re.sub('KERN_ERR ', '', e)
coccinelle.y = m;
@c@
expression a.e;
identifier b.y;
@@
- printk(e,
+ pr_err(y,
...);
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 18:37:38 +0000 (21:37 +0300)]
Staging: emxx_udc: Replace custom printk macro ERR with dev_err or pr_err
This patch removes the use of custom printk macros ERR and replace it
with dev_err, or pr_err in the following cases:
- if no appropriate struct device *dev field where found for dev_err.
- or dev could be null eg. "dev_err(udc->dev" not possible inside "if
(udc == null)"
Issue addressed by checkpatch.pl.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Mon, 2 Mar 2015 17:01:42 +0000 (20:01 +0300)]
Staging: emxx_udc: Fix do not add new typedefs and remove volatile
This patch fixes the following checkpatch.pl warnings:"do not add new
typedefs" and "Use of volatile is usually wrong".
Remove typedefs keyword and rename identifiers appropriately.
Remove volatile from union usb_regs_access
Update related files.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Tue, 3 Mar 2015 07:39:36 +0000 (02:39 -0500)]
staging/lustre/llite: Fix obd name after c&p error
commit 95745e9b1de2 ("staging: lustre: Use kasprintf.") introduced
a copy and paste error causing two different obd types to be assigned
same content causing lustre to fail on mount with a warning from procfs
followed by a bizzare error about OST not having enough MDS
capabilities.
This patch unbreaks Lustre client again.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru> CC: Navya Sri Nizamkari <navyasri.tech@gmail.com> CC: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That's for a PLX PCI 9050/9052 PCI interface chip with custom subvendor
and subdevice ID. The "%String6208%" macro expands to "ADLINK PCI-6208"
in the INF file.
Add a corresponding entry to this driver module's PCI device table.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 27 Feb 2015 15:07:36 +0000 (15:07 +0000)]
staging: comedi: adl_pci6208: remove multiple board type support
This driver module now only supports a single board type, so remove the
infrastructure for describing multiple board types. The comedi
"auto_attach" handler, `pci6208_auto_attach()` doesn't need to set the
comedi device's `board_name` or `board_ptr` members. The former is
automatically pointed to the comedi driver's `driver_name` by the core
comedi module, and the latter is not used anywhere else. The AO
subdevice's `n_chans` member can be set to 16 without looking it up in
the single element of `pci6208_boards[]`. There is no need to pass a
board index from the PCI device table to the "auto_attach" handler.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 27 Feb 2015 15:07:35 +0000 (15:07 +0000)]
staging: comedi: adl_pci6208: combine PCI-6208 and PCI-6216 support
This module's PCI device table has separate PCI device IDs for PCI-6208
and PCI-6216, but in reality, both boards and their cPCI and PCIe
variants seem to have the same PCI device ID: 0x6208. The PCI subdevice
ID doesn't seem to help either.
It shouldn't do any harm to claim 16 AO channels for all devices
supported by this driver. The original PCI-6216 is just a PCI-6208 with
a daughter board providing the extra DACs. The data is clocked out to
the DACs serially with no acknowledgment. I assume this would still
happen when the DACs for the upper 8 channels are missing. Therefore,
change the driver to support a single board type with 16 AO channels,
and remove the suspicious PCI device ID for the PCI-6216.
Evidence about lack of a separate PCI device ID for PCI-6216 follows....
1. Jesus Vasquez reports the following lspci output for a PCIe-6216 on
his Ubuntu 12.04 system:
lspci -n -vvv
07:00.0 1180: 144a:6208 (rev 02)
Subsystem: 144a:6208
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at f6000000 (32-bit, non-prefetchable)
[size=128]
Region 1: I/O ports at c100 [size=128]
Region 2: I/O ports at c000 [size=256]
Kernel driver in use: adl_pci6208
Kernel modules: adl_pci6208
That system's "adl_pci6208" module only has the single PCI device ID for
the PCI-6208, but works for his PCIe-6216 except that it only supports 8
analog output channels instead of 16.
2. ADLINK's binary Linux module "pci6208.ko" (there is no separate
module for the PCI-6216) has a single alias:
alias: pci:v0000144Ad00006208sv*sd*bc*sc*i*
3. The MS Windows drivers include this set of hardware IDs for the
PCI-6208 series, with nothing more specific for the PCI-6216 (they are
all tied to the same name "ADLINK PCI-6208" and there is no mention of
PCI-6216):
staging: comedi: cb_pcimdas: add 8254 timer (pacer) support
The hardware has an 8254 timer/counter. Channe; 0 is available as a
generic counter/timer with the clock, gate, and output signals all
availabe on the main 37 pin connector. Channels 1 and 2 are used for
the pacer.
Add support for the 8254 timer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcimdas: tidy up cb_pcimdas_auto_attach()
For aesthetics, add some whitespace to the subdevice init.
Remove the unnecessary comments as well as the initialization of the
analog input subdevice 'len_chanlist'. That member is only used by
subdevices that support async commands.
For aesthetics, rename the analog input subdevice (*insn_read) function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcimdas: provide analog output range table
The analog output range is not programmable. The DAC ranges are
jumper-settable on the board. For aesthetics, provide a range table
for the user with all possible ranges.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcimdas: support analog input programmable ranges
The hardware uses a switch on the board to select if the analog inputs
are bipolar or uinipolar. The gain is programmable to allow the following
input ranges:
Gain Bipolar Unipolar
0 +/-10V 0 to 10V
1 +/-5V 0 to 5V
2 +/-2.5V 0 to 2.5V
3 +/-1.25V 0 to 1.25V
Add the necessary code to the driver to allow the user to select the
desired range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / mirror_ubuntu-hirsute-kernel.git / log