Merge tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- tm: Always reclaim in start_thread() for exec() class syscalls from
Cyril Bur
- tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael
Neuling
- eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan
- Initialise pci_io_base as early as possible from Darren Stevens
* tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Initialise pci_io_base as early as possible
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
powerpc/eeh: Fix wrong argument passed to eeh_rmv_device()
powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
Merge tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes frlm Dave Airlie:
"Just some AMD and Intel fixes, the AMD ones are further production
Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID
changes and a couple of other fixes.
Still a bit Internet challenged here, hopefully end of next week will
solve it"
* tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
drm/amd/powerplay: workaround for UVD clock issue
drm/amdgpu: add ACLK_CNTL setting for polaris10
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
drm/i915: Add more Kabylake PCI IDs.
drm/i915: Avoid early timeout during AUX transfers
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
drm/i915/lpt: Avoid early timeout during FDI PHY reset
drm/i915/bxt: Avoid early timeout during PLL enable
drm/i915: Refresh cached DP port register value on resume
drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
drm/amd/powerplay: disable FFC.
drm/amd/powerplay: add some definition for FFC feature on polaris.
Merge tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver-specific fixes for SPI, all in the normal important
if you hit them category especially the rockchip driver fix which
addresses a race which has been exposed more frequently with some
recent performance improvements"
* tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sunxi: fix transfer timeout
spi: sun4i: fix FIFO limit
spi: rockchip: Signal unfinished DMA transfers
spi: spi-ti-qspi: Suspend the queue before removing the device
Merge tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two small fixes for the regulator subsystem - one fixing a crash with
one of the devices supported by the max77620 driver, another fixing
startup for the anatop regulator when it starts up with the regulator
in bypass mode"
* tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max77620: check for valid regulator info
regulator: anatop: allow regulator to be in bypass mode
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A small fix for the newly added oxnas clk driver and a handful of
rockchip clk driver fixes for newly added rk3399 support"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Fix return value check in oxnas_stdclk_probe()
clk: rockchip: release io resource when failing to init clk on rk3399
clk: rockchip: fix cpuclk registration error handling
clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
clk: rockchip: mark rk3399 GIC clocks as critical
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
Dave Airlie [Sat, 2 Jul 2016 05:50:41 +0000 (15:50 +1000)]
Merge tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel into drm-fixes
here's a batch of i915 fixes for 4.7.
* tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
drm/i915: Add more Kabylake PCI IDs.
drm/i915: Avoid early timeout during AUX transfers
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
drm/i915/lpt: Avoid early timeout during FDI PHY reset
drm/i915/bxt: Avoid early timeout during PLL enable
drm/i915: Refresh cached DP port register value on resume
Dave Airlie [Sat, 2 Jul 2016 05:48:33 +0000 (15:48 +1000)]
Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Just a few more late fixes for Polaris cards.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: workaround for UVD clock issue
drm/amdgpu: add ACLK_CNTL setting for polaris10
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
drm/amd/powerplay: disable FFC.
drm/amd/powerplay: add some definition for FFC feature on polaris.
Merge tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an expression in the ACPI PCI IRQ management code added by a
recent commit that overlooked missing parens in it, so the result of
the computation is incorrect in some cases (Sinan Kaya)"
* tag 'acpi-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI,PCI,IRQ: correct operator precedence
Merge tag 'pm-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Three cpufreq fixes, one in the core (stable-candidate) and two in
drivers (intel_pstate and cpufreq-dt).
Specifics:
- Fix a recent intel_pstate regression that caused the number of
wakeups to increase significantly on an idle system in some cases
due to excessive synchronize_sched() invocations (Rafael Wysocki).
- Fix unnecessary invocations of WARN_ON() in the cpufreq core after
cpufreq has been suspended introduced during the 4.6 cycla (Rafael
Wysocki).
- Fix an error code path in the cpufreq-dt-platdev driver that
forgets to drop a reference to a DT node (Masahiro Yamada)"
* tag 'pm-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy()
cpufreq: dt: call of_node_put() before error out
intel_pstate: Do not clear utilization update hooks on policy changes
Merge tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux
Pull lockd/locks fixes from Bruce Fields:
"One fix for lockd soft lookups in an error path, and one fix for file
leases on overlayfs"
* tag 'nfsd-4.7-3' of git://linux-nfs.org/~bfields/linux:
locks: use file_inode()
lockd: unregister notifier blocks if the service fails to come up completely
Merge tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull more MFD fixes from Lee Jones:
"Apologies for missing these from the first pull request.
Final patches fixing Reset API change"
* tag 'mfd-fixes-4.7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
phy: miphy28lp: Inform the reset framework that our reset line may be shared
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"1/ Two regression fixes since v4.6: one for the byte order of a sysfs
attribute (bz121161) and another for QEMU 2.6's NVDIMM _DSM (ACPI
Device Specific Method) implementation that gets tripped up by new
auto-probing behavior in the NFIT driver.
2/ A fix tagged for -stable that stops the kernel from
clobbering/ignoring changes to the configuration of a 'pfn'
instance ("struct page" driver). For example changing the
alignment from 2M to 1G may silently revert to 2M if that value is
currently stored on media.
3/ A fix from Eric for an xfstests failure in dax. It is not
currently tagged for -stable since it requires an 8-exabyte file
system to trigger, and there appear to be no user visible side
effects"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nfit: fix format interface code byte order
dax: fix offset overflow in dax_io
acpi, nfit: fix acpi_check_dsm() vs zero functions implemented
libnvdimm, pfn, dax: fix initialization vs autodetect for mode + alignment
Merge tag 'tty-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two tty fixes for some reported issues. One resolves a crash
in devpts, and the other resolves a problem with the fbcon cursor
blink causing lockups.
Both have been in linux-next with no reported problems"
* tag 'tty-4.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
devpts: fix null pointer dereference on failed memory allocation
tty: vt: Fix soft lockup in fbcon cursor blink timer.
Merge tag 'iommu-fixes-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Three fixes:
- Fix use of smp_processor_id() in preemptible code in the IOVA
allocation code. This got introduced with the scalability
improvements in this release cycle.
- A VT-d fix for out-of-bounds access of the iommu->domains array.
The bug showed during suspend/resume.
- AMD IOMMU fix to print the correct device id in the ACPI parsing
code"
* tag 'iommu-fixes-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Initialize devid variable before using it
iommu/vt-d: Fix overflow of iommu->domains array
iommu/iova: Disable preemption around use of this_cpu_ptr()
ltp fcntl33 testcase caused an Oops in selinux_file_send_sigiotask.
The reason is that generic_add_lease() used filp->f_path.dentry->inode
while all the others use file_inode(). This makes a difference for files
opened on overlayfs since the former will point to the overlay inode the
latter to the underlying inode.
So generic_add_lease() added the lease to the overlay inode and
generic_delete_lease() removed it from the underlying inode. When the file
was released the lease remained on the overlay inode's lock list, resulting
in use after free.
Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Lee Jones [Tue, 28 Jun 2016 08:24:40 +0000 (09:24 +0100)]
usb: dwc3: st: Use explicit reset_control_get_exclusive() API
We're making all reset line users specify whether their lines are
shared with other IP or they operate them exclusively. In this case
the line is exclusively used only by this IP, so use the *_exclusive()
API accordingly.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Tue, 28 Jun 2016 08:33:55 +0000 (09:33 +0100)]
phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API
We're making all reset line users specify whether their lines are
shared with other IP or they operate them exclusively. In this case
the line is exclusively used only by this IP, so use the *_exclusive()
API accordingly.
Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Fri, 3 Jun 2016 10:44:28 +0000 (11:44 +0100)]
phy: miphy28lp: Inform the reset framework that our reset line may be shared
On the STiH410 B2120 development board the MiPHY28lp shares its reset
line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device
(DRD). New functionality in the reset subsystems forces consumers to
be explicit when requesting shared/exclusive reset lines.
Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
namespace: update event counter when umounting a deleted dentry
- m_start() in fs/namespace.c expects that ns->event is incremented each
time a mount added or removed from ns->list.
- umount_tree() removes items from the list but does not increment event
counter, expecting that it's done before the function is called.
- There are some codepaths that call umount_tree() without updating
"event" counter. e.g. from __detach_mounts().
- When this happens m_start may reuse a cached mount structure that no
longer belongs to ns->list (i.e. use after free which usually leads
to infinite loop).
This change fixes the above problem by incrementing global event counter
before invoking umount_tree().
Miklos Szeredi [Wed, 29 Jun 2016 08:54:23 +0000 (10:54 +0200)]
9p: use file_dentry()
v9fs may be used as lower layer of overlayfs and accessing f_path.dentry
can lead to a crash. In this case it's a NULL pointer dereference in
p9_fid_create().
Fix by replacing direct access of file->f_path.dentry with the
file_dentry() accessor, which will always return a native object.
Reported-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Tested-by: Alessio Igor Bogani <alessioigorbogani@gmail.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Scott Mayhew [Thu, 30 Jun 2016 14:39:32 +0000 (10:39 -0400)]
lockd: unregister notifier blocks if the service fails to come up completely
If the lockd service fails to start up then we need to be sure that the
notifier blocks are not registered, otherwise a subsequent start of the
service could cause the same notifier to be registered twice, leading to
soft lockups.
Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Fixes: 0751ddf77b6a "lockd: Register callbacks on the inetaddr_chain..." Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Linus Torvalds [Thu, 30 Jun 2016 16:57:52 +0000 (09:57 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.
KVM: LAPIC: cap __delay at lapic_timer_advance_ns
KVM: x86: move nsec_to_cycles from x86.c to x86.h
pvclock: Get rid of __pvclock_read_cycles in function pvclock_read_flags
pvclock: Cleanup to remove function pvclock_get_nsec_offset
pvclock: Add CPU barriers to get correct version value
KVM: arm/arm64: Stop leaking vcpu pid references
arm64: KVM: fix build with CONFIG_ARM_PMU disabled
Linus Torvalds [Thu, 30 Jun 2016 16:53:43 +0000 (09:53 -0700)]
Merge tag 'arc-4.7-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fix from Vineet Gupta:
"Reinstate dwarf unwinder/loadable-modules with new gnu tools"
* tag 'arc-4.7-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: unwind: warn only once if DW2_UNWIND is disabled
ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)
Linus Torvalds [Thu, 30 Jun 2016 16:44:34 +0000 (09:44 -0700)]
Merge tag 'mfd-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"Contained are some standard fixes and unusually an extension to the
Reset API. Some of those changes are required to fix a bug introduced
in -rc1, which introduces extra 'reset line checks' i.e. whether the
line is shared or not. If a line is shared and the new *_shared() API
is not used, the request fails with an error. This breaks USB in v4.7
for ST's platforms.
Admittedly, there are some patches contained in our (MFD/Reset)
immutable branch which are not true -fixes, but there isn't anything I
can do about that. Rest assured though, there aren't any API
'changes'. Everything is the same from the consumer's perspective.
- Use new reset_*_get_shared() variant to prevent reset line
obtainment failure (Fixes commit 0b52297f2288: "reset: Add support
for shared reset controls")
- Fix unintentional switch() fall-through into error path
- Fix uninitialised variable compiler warning"
* tag 'mfd-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: da9053: Fix compiler warning message for uninitialised variable
mfd: max77620: Fix FPS switch statements
phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
usb: dwc3: st: Inform the reset framework that our reset line may be shared
usb: host: ehci-st: Inform the reset framework that our reset line may be shared
usb: host: ohci-st: Inform the reset framework that our reset line may be shared
reset: TRIVIAL: Add line break at same place for similar APIs
reset: Supply *_shared variant calls when using *_optional APIs
reset: Supply *_shared variant calls when using of_* API
reset: Ensure drivers are explicit when requesting reset lines
reset: Reorder inline reset_control_get*() wrappers
Sinan Kaya [Wed, 29 Jun 2016 08:27:38 +0000 (04:27 -0400)]
ACPI,PCI,IRQ: correct operator precedence
The omitted parenthesis prevents the addition operation when
acpi_penalize_isa_irq function is called.
Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Darren Stevens [Wed, 29 Jun 2016 20:06:28 +0000 (21:06 +0100)]
powerpc: Initialise pci_io_base as early as possible
Commit d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for
radix") turned kernel memory and IO addresses from #defined constants to
variables initialised at runtime.
On PA6T (pasemi) systems the setup_arch() machine call initialises the
onboard PCI-e root-ports, and uses pci_io_base to do this, which is now
before its value has been set, resulting in a panic early in boot before
console IO is initialised.
Move the pci_io_base initialisation to the same place as vmalloc ranges
are set (hash__early_init_mmu()/radix__early_init_mmu()) - this is the
earliest possible place we can initialise it.
Fixes: d6a9996e84ac ("powerpc/mm: vmalloc abstraction in preparation for radix") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Darren Stevens <darren@stevens-zone.net> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Add #ifdef CONFIG_PCI, massage change log slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Steve Twiss [Mon, 27 Jun 2016 15:06:36 +0000 (16:06 +0100)]
mfd: da9053: Fix compiler warning message for uninitialised variable
Fix compiler warning caused by an uninitialised variable inside
da9052_group_write() function. Defaulting the value to zero covers
the trivial case.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Rhyland Klein [Thu, 12 May 2016 17:45:04 +0000 (13:45 -0400)]
mfd: max77620: Fix FPS switch statements
When configuring FPS during probe, assuming a DT node is present for
FPS, the code can run into a problem with the switch statements in
max77620_config_fps() and max77620_get_fps_period_reg_value(). Namely,
in the case of chip->chip_id == MAX77620, it will set
fps_[mix|max]_period but then fall through to the default switch case
and return -EINVAL. Returning this from max77620_config_fps() will
cause probe to fail.
Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Tue, 28 Jun 2016 08:32:12 +0000 (09:32 +0100)]
phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared
On the STiH410 B2120 development board the ports on the Generic PHY
share their reset lines with each other. New functionality in the
reset subsystems forces consumers to be explicit when requesting
shared/exclusive reset lines.
Lee Jones [Tue, 28 Jun 2016 08:23:58 +0000 (09:23 +0100)]
usb: dwc3: st: Inform the reset framework that our reset line may be shared
On the STiH410 B2120 development board the MiPHY28lp shares its reset
line with the Synopsys DWC3 SuperSpeed (SS) USB 3.0 Dual-Role-Device
(DRD). New functionality in the reset subsystems forces consumers to
be explicit when requesting shared/exclusive reset lines.
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Mon, 6 Jun 2016 17:08:53 +0000 (18:08 +0100)]
usb: host: ehci-st: Inform the reset framework that our reset line may be shared
On the STiH410 B2120 development board the ST EHCI IP shares its reset
line with the OHCI IP. New functionality in the reset subsystems forces
consumers to be explicit when requesting shared/exclusive reset lines.
Acked-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lee Jones [Mon, 6 Jun 2016 17:08:54 +0000 (18:08 +0100)]
usb: host: ohci-st: Inform the reset framework that our reset line may be shared
On the STiH410 B2120 development board the ST EHCI IP shares its reset
line with the OHCI IP. New functionality in the reset subsystems forces
consumers to be explicit when requesting shared/exclusive reset lines.
Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Linus Torvalds [Wed, 29 Jun 2016 22:30:26 +0000 (15:30 -0700)]
Merge tag 'nfs-for-4.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Stable bugfixes:
- Fix _cancel_empty_pagelist
- Fix a double page unlock
- Make nfs_atomic_open() call d_drop() on all ->open_context() errors.
- Fix another OPEN_DOWNGRADE bug
Other bugfixes:
- Ensure we handle delegation errors in nfs4_proc_layoutget()
- Layout stateids start out as being invalid
- Add sparse lock annotations for pnfs_find_alloc_layout
- Handle bad delegation stateids in nfs4_layoutget_handle_exception
- Fix up O_DIRECT results
- Fix potential use after free of state in nfs4_do_reclaim.
- Mark the layout stateid invalid when all segments are removed
- Don't let readdirplus revalidate an inode that was marked as stale
- Fix potential race in nfs_fhget()
- Fix an unused variable warning"
* tag 'nfs-for-4.7-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix another OPEN_DOWNGRADE bug
make nfs_atomic_open() call d_drop() on all ->open_context() errors.
NFS: Fix an unused variable warning
NFS: Fix potential race in nfs_fhget()
NFS: Don't let readdirplus revalidate an inode that was marked as stale
NFSv4.1/pnfs: Mark the layout stateid invalid when all segments are removed
NFS: Fix a double page unlock
pnfs_nfs: fix _cancel_empty_pagelist
nfs4: Fix potential use after free of state in nfs4_do_reclaim.
NFS: Fix up O_DIRECT results
NFS/pnfs: handle bad delegation stateids in nfs4_layoutget_handle_exception
NFSv4.1/pnfs: Add sparse lock annotations for pnfs_find_alloc_layout
NFSv4.1/pnfs: Layout stateids start out as being invalid
NFSv4.1/pnfs: Ensure we handle delegation errors in nfs4_proc_layoutget()
Linus Torvalds [Wed, 29 Jun 2016 22:18:47 +0000 (15:18 -0700)]
Merge branch 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
"Two small patches to fix audit problems in 4.7-rcX: the first fixes a
potential kref leak, the second removes some header file noise.
The first is an important bug fix that really should go in before 4.7
is released, the second is not critical, but falls into the very-nice-
to-have category so I'm including in the pull request.
Both patches are straightforward, self-contained, and pass our
testsuite without problem"
* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
audit: move audit_get_tty to reduce scope and kabi changes
audit: move calcs after alloc and check when logging set loginuid
Merge tag 'iio-fixes-for-4.7c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Third set of fixes for IIO in the 4.7 cycle.
A couple of really old bugs and the results of Mark taking a close look at
some nasty regulator handling.
* ad7266
- Fix broken regulator handling that won't play well with dummy regulators.
- Correctly handle and optional regulator.
- Fix probe deferral for the vref regulator.
* kxsd9
- Fix a wrong error check that leads to an inability to write or read
the scale.
* sca3000
- Fix a wrong error check that leads to an inability to read back the
sampling frequency.
Lee Jones [Mon, 6 Jun 2016 15:56:52 +0000 (16:56 +0100)]
reset: Supply *_shared variant calls when using *_optional APIs
Consumers need to be able to specify whether they are requesting an
'exclusive' or 'shared' reset line no matter which API (of_*, devm_*,
etc) they are using. This change allows users of the optional_* API
in particular to specify that their request is for a 'shared' line.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Lee Jones [Mon, 6 Jun 2016 15:56:51 +0000 (16:56 +0100)]
reset: Supply *_shared variant calls when using of_* API
Consumers need to be able to specify whether they are requesting an
'exclusive' or 'shared' reset line no matter which API (of_*, devm_*,
etc) they are using. This change allows users of the of_* API in
particular to specify that their request is for a 'shared' line.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Lee Jones [Mon, 6 Jun 2016 15:56:50 +0000 (16:56 +0100)]
reset: Ensure drivers are explicit when requesting reset lines
Phasing out generic reset line requests enables us to make some better
decisions on when and how to (de)assert said lines. If an 'exclusive'
line is requested, we know a device *requires* a reset and that it's
preferable to act upon a request right away. However, if a 'shared'
reset line is requested, we can reasonably assume sure that placing a
device into reset isn't a hard requirement, but probably a measure to
save power and is thus able to cope with not being asserted if another
device is still in use.
In order allow gentle adoption and not to forcing all consumers to
move to the API immediately, causing administration headache between
subsystems, this patch adds some temporary stand-in shim-calls. This
will ease the burden at merge time and allow subsystems to migrate over
to the new API in a more realistic time-frame.
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We're about to split the current API into two, where consumers will
be forced to be explicit when requesting reset lines. The choice
will be to either the call the *_exclusive or *_shared variant
depending on whether they can actually tolorate not being asserted
when that request is made.
The new API will look like this once reorded and complete:
Pull networking fixes from David Miller:
"I've been traveling so this accumulates more than week or so of bug
fixing. It perhaps looks a little worse than it really is.
1) Fix deadlock in ath10k driver, from Ben Greear.
2) Increase scan timeout in iwlwifi, from Luca Coelho.
3) Unbreak STP by properly reinjecting STP packets back into the
stack. Regression fix from Ido Schimmel.
4) Mediatek driver fixes (missing malloc failure checks, leaking of
scratch memory, wrong indexing when mapping TX buffers, etc.) from
John Crispin.
5) Fix endianness bug in icmpv6_err() handler, from Hannes Frederic
Sowa.
6) Fix hashing of flows in UDP in the ruseport case, from Xuemin Su.
7) Fix netlink notifications in ovs for tunnels, delete link messages
are never emitted because of how the device registry state is
handled. From Nicolas Dichtel.
8) Conntrack module leaks kmemcache on unload, from Florian Westphal.
9) Prevent endless jump loops in nft rules, from Liping Zhang and
Pablo Neira Ayuso.
10) Not early enough spinlock initialization in mlx4, from Eric
Dumazet.
11) Bind refcount leak in act_ipt, from Cong WANG.
12) Missing RCU locking in HTB scheduler, from Florian Westphal.
13) Several small MACSEC bug fixes from Sabrina Dubroca (missing RCU
barrier, using heap for SG and IV, and erroneous use of async flag
when allocating AEAD conext.)
14) RCU handling fix in TIPC, from Ying Xue.
15) Pass correct protocol down into ipv4_{update_pmtu,redirect}() in
SIT driver, from Simon Horman.
16) Socket timer deadlock fix in TIPC from Jon Paul Maloy.
17) Fix potential deadlock in team enslave, from Ido Schimmel.
18) Memory leak in KCM procfs handling, from Jiri Slaby.
19) ESN generation fix in ipv4 ESP, from Herbert Xu.
20) Fix GFP_KERNEL allocations with locks held in act_ife, from Cong
WANG.
21) Use after free in netem, from Eric Dumazet.
22) Uninitialized last assert time in multicast router code, from Tom
Goff.
23) Skip raw sockets in sock_diag destruction broadcast, from Willem
de Bruijn.
24) Fix link status reporting in thunderx, from Sunil Goutham.
25) Limit resegmentation of retransmit queue so that we do not
retransmit too large GSO frames. From Eric Dumazet.
26) Delay bpf program release after grace period, from Daniel
Borkmann"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (141 commits)
openvswitch: fix conntrack netlink event delivery
qed: Protect the doorbell BAR with the write barriers.
neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()
e1000e: keep VLAN interfaces functional after rxvlan off
cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header
qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag()
bpf, perf: delay release of BPF prog after grace period
net: bridge: fix vlan stats continue counter
tcp: do not send too big packets at retransmit time
ibmvnic: fix to use list_for_each_safe() when delete items
net: thunderx: Fix TL4 configuration for secondary Qsets
net: thunderx: Fix link status reporting
net/mlx5e: Reorganize ethtool statistics
net/mlx5e: Fix number of PFC counters reported to ethtool
net/mlx5e: Prevent adding the same vxlan port
net/mlx5e: Check for BlueFlame capability before allocating SQ uar
net/mlx5e: Change enum to better reflect usage
net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices
net/mlx5: Update command strings
net: marvell: Add separate config ANEG function for Marvell 88E1111
...
Linus Torvalds [Wed, 29 Jun 2016 18:48:05 +0000 (11:48 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Another two bug fixes for 4.7:
- The revert of patch which removed boot information for systems
using an intermediate boot kernel, e.g. the SLES12 grub setup.
- A fix for an incorrect inline assembly constraint that causes
broken code to be generated with gcc 4.8.5"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix test_fp_ctl inline assembly contraints
Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"
Dan Williams [Wed, 29 Jun 2016 18:19:32 +0000 (11:19 -0700)]
nfit: fix format interface code byte order
Per JEDEC Annex L Release 3 the SPD data is:
Bits 9~5 00 000 = Function Undefined
00 001 = Byte addressable energy backed
00 010 = Block addressed
00 011 = Byte addressable, no energy backed
All other codes reserved
Bits 4~0 0 0000 = Proprietary interface
0 0001 = Standard interface 1
All other codes reserved; see Definitions of Functions
...and per the ACPI 6.1 spec:
byte0: Bits 4~0 (0 or 1)
byte1: Bits 9~5 (1, 2, or 3)
...so a format interface code displayed as 0x301 should be stored in the
nfit as (0x1, 0x3), little-endian.
Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Robert Moore <robert.moore@intel.com> Cc: Robert Elliott <elliott@hpe.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=121161 Fixes: 30ec5fd464d5 ("nfit: fix format interface code byte order per ACPI6.1") Fixes: 5ad9a7fde07a ("acpi/nfit: Update nfit driver to comply with ACPI 6.1") Reported-by: Kristin Jacque <kristin.jacque@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
regulator: max77620: check for valid regulator info
SD4 regulator is not registered with regulator core
framework in probe as there is no support in MAX77620 PMIC,
removing SD4 entry from MAX77620 regulator information list
and checking for valid regulator information data before
configuring FPS source and FPS power up/down period to avoid
NULL pointer exception if regulator not registered with core.
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Wed, 29 Jun 2016 17:05:44 +0000 (10:05 -0700)]
Merge tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are a bunch of fixes for pin control. Just drivers and a
MAINTAINERS fixup:
- Driver fixes for i.MX, single register, Tegra and BayTrail.
- MAINTAINERS entry for the documentation"
* tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Fix mingled clock pins
MAINTAINERS: belong Documentation/pinctrl.txt properly
pinctrl: tegra: Fix build dependency
gpio: tegra: Make lockdep class file-scoped
pinctrl: single: Fix missing flush of posted write for a wakeirq
pinctrl: imx: Do not treat a PIN without MUX register as an error
Linus Torvalds [Wed, 29 Jun 2016 17:04:42 +0000 (10:04 -0700)]
Merge branch 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Three fix patches. Two are for cgroup / css init failure path. The
last one makes css_set_lock irq-safe as the deadline scheduler ends up
calling put_css_set() from irq context"
* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Disable IRQs while holding css_set_lock
cgroup: set css->id to -1 during init
cgroup: remove redundant cleanup in css_create
Rex Zhu [Mon, 27 Jun 2016 09:30:24 +0000 (17:30 +0800)]
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
1. Populate correct value of VDDCI voltage for SMC SAMU, VCE,
and UVD levels depending on whether VDDCi control is SVI2 or GPIO.
2. Populate SMC ACPI minimum voltage using VBIOS boot SCLK and MCLK
When static voltage is configured as VDDCI, driver still tries to program
a voltage for MM minVoltage using VDDC-VDDCI delta requirement.
minVoltage should be set as boot up voltage.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David S. Miller [Wed, 29 Jun 2016 12:33:46 +0000 (08:33 -0400)]
Merge tag 'mac80211-for-davem-2016-06-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two small fixes
* fix mesh peer link counter, decrement wasn't always done at all
* fix ethertype (length) for packets without RFC 1042 or bridge
tunnel header
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Gauthier [Tue, 28 Jun 2016 15:22:26 +0000 (17:22 +0200)]
openvswitch: fix conntrack netlink event delivery
Only the first and last netlink message for a particular conntrack are
actually sent. The first message is sent through nf_conntrack_confirm when
the conntrack is committed. The last one is sent when the conntrack is
destroyed on timeout. The other conntrack state change messages are not
advertised.
When the conntrack subsystem is used from netfilter, nf_conntrack_confirm
is called for each packet, from the postrouting hook, which in turn calls
nf_ct_deliver_cached_events to send the state change netlink messages.
This commit fixes the problem by calling nf_ct_deliver_cached_events in the
non-commit case as well.
Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") CC: Joe Stringer <joestringer@nicira.com> CC: Justin Pettit <jpettit@nicira.com> CC: Andy Zhou <azhou@nicira.com> CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: Protect the doorbell BAR with the write barriers.
SPQ doorbell is currently protected with the compilation barrier. Under the
stress scenarios, we may get into a state where (due to the weak ordering)
several ramrod doorbells were written to the BAR with an out-of-order
producer values. Need to change the barrier type to a write barrier to make
sure that the write buffer is flushed after each doorbell.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Barroso [Tue, 28 Jun 2016 08:16:43 +0000 (11:16 +0300)]
neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit()
neigh_xmit() expects to be called inside an RCU-bh read side critical
section, and while one of its two current callers gets this right, the
other one doesn't.
More specifically, neigh_xmit() has two callers, mpls_forward() and
mpls_output(), and while both callers call neigh_xmit() under
rcu_read_lock(), this provides sufficient protection for neigh_xmit()
only in the case of mpls_forward(), as that is always called from
softirq context and therefore doesn't need explicit BH protection,
while mpls_output() can be called from process context with softirqs
enabled.
When mpls_output() is called from process context, with softirqs
enabled, we can be preempted by a softirq at any time, and RCU-bh
considers the completion of a softirq as signaling the end of any
pending read-side critical sections, so if we do get a softirq
while we are in the part of neigh_xmit() that expects to be run inside
an RCU-bh read side critical section, we can end up with an unexpected
RCU grace period running right in the middle of that critical section,
making things go boom.
This patch fixes this impedance mismatch in the callee, by making
neigh_xmit() always take rcu_read_{,un}lock_bh() around the code that
expects to be treated as an RCU-bh read side critical section, as this
seems a safer option than fixing it in the callers.
Fixes: 4fd3d7d9e868f ("neigh: Add helper function neigh_xmit") Signed-off-by: David Barroso <dbarroso@fastly.com> Signed-off-by: Lennert Buytenhek <lbuytenhek@fastly.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarod Wilson [Wed, 29 Jun 2016 03:41:31 +0000 (20:41 -0700)]
e1000e: keep VLAN interfaces functional after rxvlan off
I've got a bug report about an e1000e interface, where a VLAN interface is
set up on top of it:
$ ip link add link ens1f0 name ens1f0.99 type vlan id 99
$ ip link set ens1f0 up
$ ip link set ens1f0.99 up
$ ip addr add 192.168.99.92 dev ens1f0.99
At this point, I can ping another host on vlan 99, ip 192.168.99.91.
However, if I do the following:
$ ethtool -K ens1f0 rxvlan off
Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on
again. I'm not sure if this is actually intended behavior, or if there's a
lack of software VLAN stripping fallback, or what, but things continue to
work if I simply don't call e1000e_vlan_strip_disable() if there are
active VLANs (plagiarizing a function from the e1000 driver here) on the
interface.
Also slipped a related-ish fix to the kerneldoc text for
e1000e_vlan_strip_disable here...
Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Wed, 29 Jun 2016 08:36:39 +0000 (10:36 +0200)]
cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header
The PDU length of incoming LLC frames is set to the total skb payload size
in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly
includes the length of the IEEE 802.11 header.
The resulting LLC frame header has a too large PDU length, causing the
llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming
skb, effectively breaking STP.
Solve the problem by properly substracting the IEEE 802.11 frame header size
from the PDU length, allowing the LLC processor to pick up the incoming
control messages.
Special thanks to Gerry Rozema for tracking down the regression and proposing
a suitable patch.
Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer") Cc: stable@vger.kernel.org Reported-by: Gerry Rozema <gerryr@rozeware.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Dan Carpenter [Mon, 27 Jun 2016 20:50:29 +0000 (23:50 +0300)]
qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag()
There is a static checker warning here "warn: mask and shift to zero"
and the code sets "ring" to zero every time. From looking at how
QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the
qlcnic_83xx_hndl() should be removed.
Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 27 Jun 2016 19:38:11 +0000 (21:38 +0200)]
bpf, perf: delay release of BPF prog after grace period
Commit dead9f29ddcc ("perf: Fix race in BPF program unregister") moved
destruction of BPF program from free_event_rcu() callback to __free_event(),
which is problematic if used with tail calls: if prog A is attached as
trace event directly, but at the same time present in a tail call map used
by another trace event program elsewhere, then we need to delay destruction
via RCU grace period since it can still be in use by the program doing the
tail call (the prog first needs to be dropped from the tail call map, then
trace event with prog A attached destroyed, so we get immediate destruction).
Fixes: dead9f29ddcc ("perf: Fix race in BPF program unregister") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Jann Horn <jann@thejh.net> Signed-off-by: David S. Miller <davem@davemloft.net>
I made a dumb off-by-one mistake when I added the vlan stats counter
dumping code. The increment should happen before the check, not after
otherwise we miss one entry when we continue dumping.
Fixes: a60c090361ea ("bridge: netlink: export per-vlan stats") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 27 Jun 2016 15:38:50 +0000 (17:38 +0200)]
tcp: do not send too big packets at retransmit time
Arjun reported a bug in TCP stack and bisected it to a recent commit.
In case where we process SACK, we can coalesce multiple skbs
into fat ones (tcp_shift_skb_data()), to lower write queue
overhead, because we do not expect to retransmit these packets.
However, SACK reneging can happen, forcing the sender to retransmit
all these packets. If skb->len is above 64KB, we then send buggy
IP packets that could hang TSO engine on cxgb4.
Neal suggested to use tcp_tso_autosize() instead of tp->gso_segs
so that we cook packets of optimal size vs TCP/pacing.
Thanks to Arjun for reporting the bug and running the tests !
Fixes: 10d3be569243 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Arjun V <arjun@chelsio.com> Tested-by: Arjun V <arjun@chelsio.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jun 2016 10:00:03 +0000 (15:30 +0530)]
net: thunderx: Fix TL4 configuration for secondary Qsets
TL4 calculation for a given SQ of secondary Qsets is incorrect
and goes out of bounds and also for some SQ's TL4 chosen will
transmit data via a different BGX interface and not same as
primary Qset's interface.
This patch fixes this issue.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jun 2016 10:00:02 +0000 (15:30 +0530)]
net: thunderx: Fix link status reporting
Check for SMU RX local/remote faults along with SPU LINK
status. Otherwise at times link is UP at our end but DOWN
at link partner's side. Also due to an issue in BGX it's
rarely seen that initialization doesn't happen properly
and SMU RX reports faults with everything fine at SPU.
This patch tries to reinitialize LMAC to fix it.
Also fixed LMAC disable sequence to properly bring down link.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Tao Wang <tao.wang@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 29 Jun 2016 08:28:59 +0000 (04:28 -0400)]
Merge branch 'mlx5-100G-fixes'
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes#2 for 4.7-rc
The following series provides one-liners fixes for mlx5 driver plus one
medium patch to reorganize ethtool counters reporting.
Highlights:
- Added MODIFY_FLOW_TABLE to command strings table
- Add ConnectX-5 PCIe 4.0 to list of supported devices
- Rename ASYNC_EVENTS enum
- Enable BlueFlame only when supported by device
- Avoid adding same vxlan port twice
- Report the correct number of PFC counters
- Reorganize ethtool reported counters and remove duplications
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Mon, 27 Jun 2016 09:08:38 +0000 (12:08 +0300)]
net/mlx5e: Reorganize ethtool statistics
Categorize and reorganize ethtool statistics counters by renaming to
"rx_*" and "tx_*" and removing redundant and duplicated counters, this
way they are easier to grasp and more user friendly.
Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Mon, 27 Jun 2016 09:08:37 +0000 (12:08 +0300)]
net/mlx5e: Fix number of PFC counters reported to ethtool
Number of PFC counters used to count only number of priorities with PFC
enabled, but each priority has more than one counter, hence the need to
multiply it by the number of PFC counters per priority.
Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Finlay [Mon, 27 Jun 2016 09:08:36 +0000 (12:08 +0300)]
net/mlx5e: Prevent adding the same vxlan port
Do not allow the same vxlan udp port to be added to the device more than
once.
Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman [Mon, 27 Jun 2016 09:08:35 +0000 (12:08 +0300)]
net/mlx5e: Check for BlueFlame capability before allocating SQ uar
Previous to this patch mapping was always set to write combining without
checking whether BlueFlame is supported in the device.
Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Mon, 27 Jun 2016 09:08:34 +0000 (12:08 +0300)]
net/mlx5e: Change enum to better reflect usage
Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to
MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an
operation.
Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Majd Dibbiny [Mon, 27 Jun 2016 09:08:33 +0000 (12:08 +0300)]
net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices
Add the upcoming ConnectX-5 PCIe 4.0 device to the list of
supported devices by the mlx5 driver.
Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Imre Deak [Tue, 28 Jun 2016 10:37:33 +0000 (13:37 +0300)]
drm/i915: Avoid early timeout during AUX transfers
Since wait_for_atomic doesn't re-check the wait-for condition after
expiry of the timeout it can fail when called from non-atomic context
even if the condition is set correctly before the expiry. Fix this by
using the non-atomic wait_for instead.
Due to the relatively long 10ms timeout, probably this didn't cause any
real problems, but fix it in any case for consistency.
Imre Deak [Tue, 28 Jun 2016 10:37:32 +0000 (13:37 +0300)]
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
Since wait_for_atomic doesn't re-check the wait-for condition after
expiry of the timeout it can fail when called from non-atomic context
even if the condition is set correctly before the expiry. Fix this by
using the non-atomic wait_for instead.
Imre Deak [Tue, 28 Jun 2016 10:37:31 +0000 (13:37 +0300)]
drm/i915/lpt: Avoid early timeout during FDI PHY reset
Since wait_for_atomic doesn't re-check the wait-for condition after
expiry of the timeout it can fail when called from non-atomic context
even if the condition is set correctly before the expiry. Fix this by
using the non-atomic wait_for instead.
Imre Deak [Tue, 28 Jun 2016 10:37:30 +0000 (13:37 +0300)]
drm/i915/bxt: Avoid early timeout during PLL enable
Since wait_for_atomic doesn't re-check the wait-for condition after
expiry of the timeout it can fail when called from non-atomic context
even if the condition is set correctly before the expiry. Fix this by
using the non-atomic wait_for instead.
I noticed this via the PLL locking timing out incorrectly, with this fix
I couldn't reproduce the problem.
Ville Syrjälä [Fri, 13 May 2016 17:53:56 +0000 (20:53 +0300)]
drm/i915: Refresh cached DP port register value on resume
During hibernation the cached DP port register value will be left with
whatever value we have there when we create the hibernation image.
Currently that means the port (and eDP PLL) will be off in the cached
value. However when we resume there is no guarantee that the value
in the actual register will match the cached value. If i915 isn't
loaded in the kernel that loads the hibernation image, the port may
well be on (eg. left on by the BIOS). The encoder state readout
does the right thing in this case and updates our encoder state
to reflect the actual hardware state. However the post-resume modeset
will then use the stale cached port register value in
intel_dp_link_down() and potentially confuse the hardware.
This was caught by the following assert
WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915]
eDP PLL state assertion failure (expected on, current off)
on account of the eDP PLL getting prematurely turned off when
shutting down the port, since the DP_PLL_ENABLE bit wasn't set
in the cached register value.
Presumably I introduced this problem in
commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup")
as before that we didn't update the cached value after shuttting the
port down. That's assuming the port got enabled at least once prior
to hibernating. If that didn't happen then the cached value would
still have been totally out of sync with reality (eg. first boot w/o
eDP on, then hibernate, and then resume with eDP on).
So, let's fix this properly and refresh the cached register value from
the hardware register during resume.
DDI platforms shouldn't use the cached value during port disable at
least, so shouldn't have this particular issue. They might still have
issues if we skip the initial modeset and then try to retrain the link
or something. But untangling this DP vs. DDI mess is a bigger topic,
so let's jut punt on DDI for now.
Harini Katakam [Mon, 27 Jun 2016 07:39:59 +0000 (13:09 +0530)]
net: marvell: Add separate config ANEG function for Marvell 88E1111
Marvell 88E1111 currently uses the generic marvell config ANEG function.
This function has a sequence accessing Page 5 and Register 31,
both of which are not defined or reserved for this PHY.
Hence this patch adds a new config ANEG function for Marvell 88E1111
without these erroneous accesses.
Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 29 Jun 2016 08:01:53 +0000 (04:01 -0400)]
Merge branch 'batman-adv-fixes'
Sven Eckelmann says:
====================
batman-adv: Fixes for Linux 4.7
Antonio currently seems to be occupied. This is currently rather unfortunate
because there are patches waiting in the batman-adv development repository
maint(enance) branch [1] since up to 6 weeks. I am now getting asked when
these patches will hit the distribution kernels and therefore decided to
submit these patches directly to netdev.
The patch from Simon works around the problem that warnings could be triggered
in the translation table code via packets using a VLAN not configured on the
target host. This warning was replaced with a rate limited info message.
Ben Hutchings found an superfluous batadv_softif_vlan_put in the error
handling code of the translation table while he backported the "batman-adv:
Fix reference counting of vlan object for tt_local_entry" patch to the stable
kernels. He noticed correctly that this batadv_softif_vlan_put should also
have been removed by the said patch.
The most requested fix at the moment is related to a double free in the
translation table code. It is a race condition which mostly happens on systems
with multiple cores and multiple network interface attached to batman-adv. Two
Freifunk communities which were haunted by weird crashes (with backtraces
reporting problems in other parts of the kernel) were kind enough to test this
patch. They reported that there systems are now running stable after applying
this patch.
An invalid memory access was detected in the batadv_icmp_packet_rr handling
code when receiving a skbuff with fragments. The last patch is fixing a memory
leak when the interface is removed via .dellink. The code to fix it was copied
from the code handling the legacy sysfs interface to remove netdevices from a
batman-adv netdevice.
There are still 28 patches in the development tree for v4.8 but I will leave
them to Antonio because these are cleanups and features and therefore for net-
next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Sun, 26 Jun 2016 09:16:13 +0000 (11:16 +0200)]
batman-adv: Clean up untagged vlan when destroying via rtnl-link
The untagged vlan object is only destroyed when the interface is removed
via the legacy sysfs interface. But it also has to be destroyed when the
standard rtnl-link interface is used.
Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Sun, 26 Jun 2016 09:16:12 +0000 (11:16 +0200)]
batman-adv: Fix ICMP RR ethernet access after skb_linearize
The skb_linearize may reallocate the skb. This makes the calculated pointer
for ethhdr invalid. But it the pointer is used later to fill in the RR
field of the batadv_icmp_packet_rr packet.
Instead re-evaluate eth_hdr after the skb_linearize+skb_cow to fix the
pointer and avoid the invalid read.
Fixes: da6b8c20a5b8 ("batman-adv: generalize batman-adv icmp packet handling") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hutchings [Sun, 26 Jun 2016 09:16:11 +0000 (11:16 +0200)]
batman-adv: Fix double-put of vlan object
Each batadv_tt_local_entry hold a single reference to a
batadv_softif_vlan. In case a new entry cannot be added to the hash
table, the error path puts the reference, but the reference will also
now be dropped by batadv_tt_local_entry_release().
Fixes: a33d970d0b54 ("batman-adv: Fix reference counting of vlan object for tt_local_entry") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Eckelmann [Sun, 26 Jun 2016 09:16:10 +0000 (11:16 +0200)]
batman-adv: Fix use-after-free/double-free of tt_req_node
The tt_req_node is added and removed from a list inside a spinlock. But the
locking is sometimes removed even when the object is still referenced and
will be used later via this reference. For example batadv_send_tt_request
can create a new tt_req_node (including add to a list) and later
re-acquires the lock to remove it from the list and to free it. But at this
time another context could have already removed this tt_req_node from the
list and freed it.
CPU#0
batadv_batman_skb_recv from net_device 0
-> batadv_iv_ogm_receive
-> batadv_iv_ogm_process
-> batadv_iv_ogm_process_per_outif
-> batadv_tvlv_ogm_receive
-> batadv_tvlv_ogm_receive
-> batadv_tvlv_containers_process
-> batadv_tvlv_call_handler
-> batadv_tt_tvlv_ogm_handler_v1
-> batadv_tt_update_orig
-> batadv_send_tt_request
-> batadv_tt_req_node_new
spin_lock(...)
allocates new tt_req_node and adds it to list
spin_unlock(...)
return tt_req_node
CPU#1
batadv_batman_skb_recv from net_device 1
-> batadv_recv_unicast_tvlv
-> batadv_tvlv_containers_process
-> batadv_tvlv_call_handler
-> batadv_tt_tvlv_unicast_handler_v1
-> batadv_handle_tt_response
spin_lock(...)
tt_req_node gets removed from list and is freed
spin_unlock(...)
CPU#0
<- returned to batadv_send_tt_request
spin_lock(...)
tt_req_node gets removed from list and is freed
MEMORY CORRUPTION/SEGFAULT/...
spin_unlock(...)
This can only be solved via reference counting to allow multiple contexts
to handle the list manipulation while making sure that only the last
context holding a reference will free the object.
Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann <sven@narfation.org> Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net> Tested-by: Amadeus Alfa <amadeus@chemnitz.freifunk.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Wunderlich [Sun, 26 Jun 2016 09:16:09 +0000 (11:16 +0200)]
batman-adv: replace WARN with rate limited output on non-existing VLAN
If a VLAN tagged frame is received and the corresponding VLAN is not
configured on the soft interface, it will splat a WARN on every packet
received. This is a quite annoying behaviour for some scenarios, e.g. if
bat0 is bridged with eth0, and there are arbitrary VLAN tagged frames
from Ethernet coming in without having any VLAN configuration on bat0.
The code should probably create vlan objects on the fly and
transparently transport these VLAN-tagged Ethernet frames, but until
this is done, at least the WARN splat should be replaced by a rate
limited output.
Fixes: 354136bcc3c4 ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 24 Jun 2016 23:25:24 +0000 (16:25 -0700)]
net: phy: Manage fixed PHY address space using IDA
If we have a system which uses fixed PHY devices and calls
fixed_phy_register() then fixed_phy_unregister() we can exhaust the
number of fixed PHYs available after a while, since we keep incrementing
the variable phy_fixed_addr, but we never decrement it.
This patch fixes that by converting the fixed PHY allocation to using
IDA, which takes care of the allocation/dealloaction of the PHY
addresses for us.
Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Neuling [Tue, 28 Jun 2016 03:01:04 +0000 (13:01 +1000)]
powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
Currently we have 2 segments that are bolted for the kernel linear
mapping (ie 0xc000... addresses). This is 0 to 1TB and also the kernel
stacks. Anything accessed outside of these regions may need to be
faulted in. (In practice machines with TM always have 1T segments)
If a machine has < 2TB of memory we never fault on the kernel linear
mapping as these two segments cover all physical memory. If a machine
has > 2TB of memory, there may be structures outside of these two
segments that need to be faulted in. This faulting can occur when
running as a guest as the hypervisor may remove any SLB that's not
bolted.
When we treclaim and trecheckpoint we have a window where we need to
run with the userspace GPRs. This means that we no longer have a valid
stack pointer in r1. For this window we therefore clear MSR RI to
indicate that any exceptions taken at this point won't be able to be
handled. This means that we can't take segment misses in this RI=0
window.
In this RI=0 region, we currently access the thread_struct for the
process being context switched to or from. This thread_struct access
may cause a segment fault since it's not guaranteed to be covered by
the two bolted segment entries described above.
We've seen this with a crash when running as a guest with > 2TB of
memory on PowerVM:
This fixes this by copying the required data from the thread_struct to
the stack before we clear MSR RI. Then once we clear RI, we only access
the stack, guaranteeing there's no segment miss.
We also tighten the region over which we set RI=0 on the treclaim()
path. This may have a slight performance impact since we're adding an
mtmsr instruction.
Fixes: 090b9284d725 ("powerpc/tm: Clear MSR RI in non-recoverable TM code") Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trond Myklebust [Sat, 25 Jun 2016 23:19:28 +0000 (19:19 -0400)]
NFS: Fix another OPEN_DOWNGRADE bug
Olga Kornievskaia reports that the following test fails to trigger
an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE.
fd0 = open(foo, RDRW) -- should be open on the wire for "both"
fd1 = open(foo, RDONLY) -- should be open on the wire for "read"
close(fd0) -- should trigger an open_downgrade
read(fd1)
close(fd1)
The issue is that we're missing a check for whether or not the current
state transitioned from an O_RDWR state as opposed to having transitioned
from a combination of O_RDONLY and O_WRONLY.
Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: cd9288ffaea4 ("NFSv4: Fix another bug in the close/open_downgrade code") Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
audit: move audit_get_tty to reduce scope and kabi changes
The only users of audit_get_tty and audit_put_tty are internal to
audit, so move it out of include/linux/audit.h to kernel.h and create
a proper function rather than inlining it. This also reduces kABI
changes.
Suggested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: line wrapped description] Signed-off-by: Paul Moore <paul@paul-moore.com>
audit: move calcs after alloc and check when logging set loginuid
Move the calculations of values after the allocation in case the
allocation fails. This avoids wasting effort in the rare case that it
fails, but more importantly saves us extra logic to release the tty
ref.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds [Tue, 28 Jun 2016 19:11:31 +0000 (12:11 -0700)]
Merge branch 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Two trivial fixes - one for a bug in the allocation failure path and
the other a compiler warning fix"
* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: sata_mv: fix mis-conversion in mv_write_cached_reg()
ata: fix return value check in ahci_seattle_get_port_info()
projects / mirror_ubuntu-eoan-kernel.git / log