]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/log
mirror_ubuntu-bionic-kernel.git
7 years agoperf tools: Only increase index if perf_evsel__new_idx() succeeds
Taeung Song [Wed, 1 Feb 2017 12:34:04 +0000 (21:34 +0900)]
perf tools: Only increase index if perf_evsel__new_idx() succeeds

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf probe: Add option --symfs
Uwe Kleine-König [Thu, 21 Jul 2016 09:48:32 +0000 (11:48 +0200)]
perf probe: Add option --symfs

perf probe makes use of debug symbols, so add --symfs as the other
commands have.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/1469094512-13440-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf symbols: Take into account symfs setting when reading file build ID
Victor Kamensky [Mon, 6 Feb 2017 23:48:28 +0000 (15:48 -0800)]
perf symbols: Take into account symfs setting when reading file build ID

After commit 5baecbcd9c9a ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option.  One can see message like this:

  bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols

It happens because code added by 5baecbcd9c9a opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.

Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.

Also note in latter tree after 5baecbcd9c9a commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.

Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf sdt: Show proper hint when event not yet in place via 'perf probe'
Ravi Bangoria [Fri, 3 Feb 2017 10:26:42 +0000 (15:56 +0530)]
perf sdt: Show proper hint when event not yet in place via 'perf probe'

All events from 'perf list', except SDT events, can be directly recorded
with 'perf record'. But, the flow is little different for SDT events.

Probe points for SDT event needs to be created using 'perf probe' before
recording it using 'perf record'.

Perf shows misleading hint when a user tries to record SDT event without
first creating a probe point. Show proper hint there.

Before patch:

  $ perf record -a -e sdt_glib:idle__add
    event syntax error: 'sdt_glib:idle__add'
                         \___ unknown tracepoint

    Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
    Hint:  Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
    ...

After patch:

  $ perf record -a -e sdt_glib:idle__add
    event syntax error: 'sdt_glib:idle__add'
                         \___ unknown tracepoint

    Error: File /sys/kernel/debug/tracing/events/sdt_glib/idle__add not found.
    Hint:  SDT event cannot be directly recorded on.
           Please first use 'perf probe sdt_glib:idle__add' before recording it.
    ...

  $ perf probe sdt_glib:idle__add
    Added new event:
      sdt_glib:idle__add   (on %idle__add in /usr/lib64/libglib-2.0.so.0.5000.2)

    You can now use it in all perf tools, such as:

        perf record -e sdt_glib:idle__add -aR sleep 1

  $ perf record -a -e sdt_glib:idle__add
    [ perf record: Woken up 1 times to write data ]
    [ perf record: Captured and wrote 0.175 MB perf.data ]

Suggested-and-Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170203102642.17258-1-ravi.bangoria@linux.vnet.ibm.com
[ s/Please use/Please first use/ and break the Hint line in two ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf list: Add debug support for outputing alias string
Andi Kleen [Sat, 28 Jan 2017 02:03:40 +0000 (18:03 -0800)]
perf list: Add debug support for outputing alias string

For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure.  For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.

Before:

% perf list
...
cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]

After

% perf list --debug
...
cache:
  l1d.replacement
       [L1D data line replacements]
        cpu/umask=0x1,period=2000003,event=0x51/
  l1d_pend_miss.fb_full
       [Cycles a demand request was blocked due to Fill Buffers inavailability]
        cpu/umask=0x2,period=2000003,cmask=1,event=0x48/

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf pmu: Support event aliases for non cpu// pmus
Andi Kleen [Sat, 28 Jan 2017 02:03:39 +0000 (18:03 -0800)]
perf pmu: Support event aliases for non cpu// pmus

The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.

This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias.  This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf pmu: Support per pmu json aliases
Andi Kleen [Sat, 28 Jan 2017 02:03:38 +0000 (18:03 -0800)]
perf pmu: Support per pmu json aliases

Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU.  Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).

To avoid printing the events multiple times in perf list filter out
duplicated events during printing.

v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf jevents: Add support for parsing uncore json files
Andi Kleen [Sat, 28 Jan 2017 02:03:37 +0000 (18:03 -0800)]
perf jevents: Add support for parsing uncore json files

Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.

Handle the "ExtSel" field, which just extends the event mask with an
additional bit.

Handle the "Filter" field which adds parameters to the main event
to configure filtering.

Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)

Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)

Then output the fields into the pmu-events data structures which are
compiled into perf.

Filter out zero fields, except for the event itself.

v2: Fix compilation. Add uncore_ prefix at pre-processing time.
    Move eventcode change to separate patch.

v3: Remove extra __maybe_unused

v4: dont duplicate aliases for cpu pmu events

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf jevents: Parse eventcode as number
Andi Kleen [Sat, 28 Jan 2017 02:03:36 +0000 (18:03 -0800)]
perf jevents: Parse eventcode as number

The next patch needs to modify event code. Previously eventcode was just
passed through as a string. Now parse it as a number.

v2: Don't special case 0

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf bpf: Add missing newline in debug messages
He Kuang [Tue, 7 Feb 2017 07:34:12 +0000 (07:34 +0000)]
perf bpf: Add missing newline in debug messages

These two debug messages are missing the trailing newline.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-2-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools arm64: Add support for generating bpf prologue
He Kuang [Tue, 7 Feb 2017 07:34:11 +0000 (07:34 +0000)]
perf tools arm64: Add support for generating bpf prologue

Since HAVE_KPROBES can be enabled in arm64, this patch introduces
regs_query_register_offset() to convert register name to offset for
arm64, so the BPF prologue feature is ready to use.

Signed-off-by: He Kuang <hekuang@huawei.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoMerge remote-tracking branch 'tip/perf/urgent' into perf/core
Arnaldo Carvalho de Melo [Mon, 6 Feb 2017 14:09:26 +0000 (11:09 -0300)]
Merge remote-tracking branch 'tip/perf/urgent' into perf/core

To pick fixes that are affecting tests of new 'perf diff' features in
perf/core.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoMerge tag 'perf-urgent-for-mingo-4.10-20170203' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Fri, 3 Feb 2017 19:42:30 +0000 (20:42 +0100)]
Merge tag 'perf-urgent-for-mingo-4.10-20170203' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

- Reference count maps in callchains, fixing a SEGFAULT when referencing a
  map after it is freed (Krister Johansen)

- Fix segfault on 'perf diff -o N' option (Namhyung Kim)

- Fix 'perf diff -o/--order' option behavior (Namhyung Kim)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 2 Feb 2017 22:08:58 +0000 (14:08 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - two microcode loader fixes

   - two FPU xstate handling fixes

   - an MCE timer handling related crash fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make timer handling more robust
  x86/microcode: Do not access the initrd after it has been freed
  x86/fpu/xstate: Fix xcomp_bv in XSAVES header
  x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
  x86/microcode/intel: Drop stashed AP patch pointer optimization

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 2 Feb 2017 21:30:19 +0000 (13:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Five kernel fixes:

   - an mmap tracing ABI fix for certain mappings

   - a use-after-free fix, found via KASAN

   - three CPU hotplug related x86 PMU driver fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Make package handling more robust
  perf/x86/intel/uncore: Clean up hotplug conversion fallout
  perf/x86/intel/rapl: Make package handling more robust
  perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
  perf/core: Fix use-after-free bug

7 years agoMerge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 2 Feb 2017 21:20:23 +0000 (13:20 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
 "Two EFI boot fixes, one for arm64 and one for x86 systems with certain
  firmware versions"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/fdt: Avoid FDT manipulation after ExitBootServices()
  x86/efi: Always map the first physical page into the EFI pagetables

7 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 2 Feb 2017 20:54:45 +0000 (12:54 -0800)]
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull  objtool fix from Ingo Molnar:
 "A fix for a bad opcode in objtool's instruction decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix IRET's opcode

7 years agoMerge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 2 Feb 2017 20:49:58 +0000 (12:49 -0800)]
Merge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux

Pull nfsd fixes from Bruce Fields:
 "Three more miscellaneous nfsd bugfixes"

* tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux:
  svcrpc: fix oops in absence of krb5 module
  nfsd: special case truncates some more
  NFSD: Fix a null reference case in find_or_create_lock_stateid()

7 years agoMerge tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa
Linus Torvalds [Thu, 2 Feb 2017 20:39:10 +0000 (12:39 -0800)]
Merge tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fix from Max Filippov:
 "A for an Xtensa build error introduced in reset code refactoring
  series in v4.9:

   - fix noMMU build on cores with MMU"

* tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix noMMU build on cores with MMU

7 years agoMerge tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Thu, 2 Feb 2017 20:34:27 +0000 (12:34 -0800)]
Merge tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL
  pointer dereference on topologies including these bridges)"

* tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies

7 years agoperf callchain: Reference count maps
Krister Johansen [Fri, 6 Jan 2017 06:23:31 +0000 (22:23 -0800)]
perf callchain: Reference count maps

If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor.  Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa2889 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf diff: Fix -o/--order option behavior (again)
Namhyung Kim [Wed, 18 Jan 2017 05:14:57 +0000 (14:14 +0900)]
perf diff: Fix -o/--order option behavior (again)

Commit 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field
interface") changed list_add() to perf_hpp__register_sort_field().

This resulted in a behavior change since the field was added to the tail
instead of the head.  So the -o option is mostly ignored due to its
order in the list.

This patch fixes it by adding perf_hpp__prepend_sort_field().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface")
Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf diff: Fix segfault on 'perf diff -o N' option
Namhyung Kim [Wed, 18 Jan 2017 05:14:56 +0000 (14:14 +0900)]
perf diff: Fix segfault on 'perf diff -o N' option

The -o/--order option is to select column number to sort a diff result.

It does the job by adding a hpp field at the beginning of the sort list.
But it should not be added to the output field list as it has no
callbacks required by a output field.

During the setup_sorting(), the perf_hpp__setup_output_field() appends
the given sort keys to the output field if it's not there already.

Originally it was checked by fmt->list being non-empty.  But commit
3f931f2c4274 ("perf hists: Make hpp setup function generic") changed it
to check the ->equal callback.

Anyways, we don't need to add the pseudo hpp field to the output field
list since it won't be used for output.  So just skip fields if they
have no ->color or ->entry callbacks.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 3f931f2c4274 ("perf hists: Make hpp setup function generic")
Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoefi/fdt: Avoid FDT manipulation after ExitBootServices()
Ard Biesheuvel [Wed, 1 Feb 2017 17:45:02 +0000 (17:45 +0000)]
efi/fdt: Avoid FDT manipulation after ExitBootServices()

Some AArch64 UEFI implementations disable the MMU in ExitBootServices(),
after which unaligned accesses to RAM are no longer supported.

Commit:

  abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel")

fixed an issue in the memory map handling of the stub FDT code, but
inadvertently created an issue with such firmware, by moving some
of the FDT manipulation to after the invocation of ExitBootServices().

Given that the stub's libfdt implementation uses the ordinary, accelerated
string functions, which rely on hardware handling of unaligned accesses,
manipulating the FDT with the MMU off may result in alignment faults.

So fix the situation by moving the update_fdt_memmap() call into the
callback function invoked by efi_exit_boot_services() right before it
calls the ExitBootServices() UEFI service (which is arguably a better
place for it anyway)

Note that disabling the MMU in ExitBootServices() is not compliant with
the UEFI spec, and carries great risk due to the fact that switching from
cached to uncached memory accesses halfway through compiler generated code
(i.e., involving a stack) can never be done in a way that is architecturally
safe.

Fixes: abfb7b686a3e ("efi/libstub/arm*: Pass latest memory map to the kernel")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: mark.rutland@arm.com
Cc: linux-efi@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: leif.lindholm@linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1485971102-23330-2-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 1 Feb 2017 19:52:27 +0000 (11:52 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix handling of interrupt status in stmmac driver. Just because we
    have masked the event from generating interrupts, doesn't mean the
    bit won't still be set in the interrupt status register. From Alexey
    Brodkin.

 2) Fix DMA API debugging splats in gianfar driver, from Arseny Solokha.

 3) Fix off-by-one error in __ip6_append_data(), from Vlad Yasevich.

 4) cls_flow does not match on icmpv6 codes properly, from Simon Horman.

 5) Initial MAC address can be set incorrectly in some scenerios, from
    Ivan Vecera.

 6) Packet header pointer arithmetic fix in ip6_tnl_parse_tlv_end_lim(),
    from Dan Carpenter.

 7) Fix divide by zero in __tcp_select_window(), from Eric Dumazet.

 8) Fix crash in iwlwifi when unregistering thermal zone, from Jens
    Axboe.

 9) Check for DMA mapping errors in starfire driver, from Alexey
    Khoroshilov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits)
  tcp: fix 0 divide in __tcp_select_window()
  ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
  net: fix ndo_features_check/ndo_fix_features comment ordering
  net/sched: matchall: Fix configuration race
  be2net: fix initial MAC setting
  ipv6: fix flow labels when the traffic class is non-0
  net: thunderx: avoid dereferencing xcv when NULL
  net/sched: cls_flower: Correct matching on ICMPv6 code
  ipv6: Paritially checksum full MTU frames
  net/mlx4_core: Avoid command timeouts during VF driver device shutdown
  gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
  net: ethtool: add support for 2500BaseT and 5000BaseT link modes
  can: bcm: fix hrtimer/tasklet termination in bcm op removal
  net: adaptec: starfire: add checks for dma mapping errors
  net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause
  can: Fix kernel panic at security_sock_rcv_skb
  net: macb: Fix 64 bit addressing support for GEM
  stmmac: Discard masked flags in interrupt status register
  net/mlx5e: Check ets capability before ets query FW command
  net/mlx5e: Fix update of hash function/key via ethtool
  ...

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Wed, 1 Feb 2017 18:30:56 +0000 (10:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull fscache fixes from Al Viro.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fscache: Fix dead object requeue
  fscache: Clear outstanding writes when disabling a cookie
  FS-Cache: Initialise stores_lock in netfs cookie

7 years agotcp: fix 0 divide in __tcp_select_window()
Eric Dumazet [Wed, 1 Feb 2017 16:33:53 +0000 (08:33 -0800)]
tcp: fix 0 divide in __tcp_select_window()

syszkaller fuzzer was able to trigger a divide by zero, when
TCP window scaling is not enabled.

SO_RCVBUF can be used not only to increase sk_rcvbuf, also
to decrease it below current receive buffers utilization.

If mss is negative or 0, just return a zero TCP window.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()
Dan Carpenter [Wed, 1 Feb 2017 08:46:32 +0000 (11:46 +0300)]
ipv6: pointer math error in ip6_tnl_parse_tlv_enc_lim()

Casting is a high precedence operation but "off" and "i" are in terms of
bytes so we need to have some parenthesis here.

Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Wed, 1 Feb 2017 17:24:00 +0000 (09:24 -0800)]
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a bug in CBC/CTR on ARM64 that breaks chaining as well as a
  bug in the core API that causes registration failures when a driver
  unloads and then reloads an algorithm"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/aes-blk - honour iv_out requirement in CBC and CTR modes
  crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg

7 years agoMerge tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Wed, 1 Feb 2017 17:22:08 +0000 (09:22 -0800)]
Merge tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "A couple of fixes showed up late in the cycle so sending them up and
  sending early in the week and not on Friday :).

  They fix a double lock in pl330 driver and runtime pm fixes for cppi
  driver"

* tag 'dmaengine-fix-4.10-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: pl330: fix double lock
  dmaengine: cppi41: Clean up pointless warnings
  dmaengine: cppi41: Fix oops in cppi41_runtime_resume
  dmaengine: cppi41: Fix runtime PM timeouts with USB mass storage

7 years agonet: fix ndo_features_check/ndo_fix_features comment ordering
Dimitris Michailidis [Wed, 1 Feb 2017 00:03:13 +0000 (16:03 -0800)]
net: fix ndo_features_check/ndo_fix_features comment ordering

Commit cdba756f5803a2 ("net: move ndo_features_check() close to
ndo_start_xmit()") inadvertently moved the doc comment for
.ndo_fix_features instead of .ndo_features_check. Fix the comment
ordering.

Fixes: cdba756f5803a2 ("net: move ndo_features_check() close to ndo_start_xmit()")
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/sched: matchall: Fix configuration race
Yotam Gigi [Tue, 31 Jan 2017 13:14:29 +0000 (15:14 +0200)]
net/sched: matchall: Fix configuration race

In the current version, the matchall internal state is split into two
structs: cls_matchall_head and cls_matchall_filter. This makes little
sense, as matchall instance supports only one filter, and there is no
situation where one exists and the other does not. In addition, that led
to some races when filter was deleted while packet was processed.

Unify that two structs into one, thus simplifying the process of matchall
creation and deletion. As a result, the new, delete and get callbacks have
a dummy implementation where all the work is done in destroy and change
callbacks, as was done in cls_cgroup.

Fixes: bf3994d2ed31 ("net/sched: introduce Match-all classifier")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Wed, 1 Feb 2017 16:34:13 +0000 (08:34 -0800)]
Merge tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Another week, another set of pin control fixes. The subsystem has seen
  high patch-spot activity recently.

  The majority of the patches are for Intel, I vaguely think it mostly
  concern phones, tablets and maybe chromebooks and even laptops with
  this Intel Atom family chips.

  Driver fixes only:

   - one fix to the Berlin driver making the SD card work fully again.

   - one fix to the Allwinner/sunxi bias function: one premature change
     needs to be partially reverted.

   - the remaining four patches are to Intel embedded SoCs: baytrail
     (three patches) and merrifield (one patch): register access
     debounce fixes and a missing spinlock"

* tag 'pinctrl-v4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler
  pinctrl: baytrail: Debounce register is one per community
  pinctrl: baytrail: Rectify debounce support (part 2)
  pinctrl: intel: merrifield: Add missed check in mrfld_config_set()
  pinctrl: sunxi: Don't enforce bias disable (for now)
  pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES

7 years agobe2net: fix initial MAC setting
Ivan Vecera [Tue, 31 Jan 2017 19:01:31 +0000 (20:01 +0100)]
be2net: fix initial MAC setting

Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged
BE3 VFs") allows privileged BE3 VFs to set its MAC address during
initialization. Although the initial MAC for such VFs is already
programmed by parent PF the subsequent setting performed by VF is OK,
but in certain cases (after fresh boot) this command in VF can fail.

The MAC should be initialized only when:
1) no MAC is programmed (always except BE3 VFs during first init)
2) programmed MAC is different from requested (e.g. MAC is set when
   interface is down). In this case the initial MAC programmed by PF
   needs to be deleted.

The adapter->dev_mac contains MAC address currently programmed in HW so
it should be zeroed when the MAC is deleted from HW and should not be
filled when MAC is set when interface is down in be_mac_addr_set() as
no programming is performed in this case.

Example of failure without the fix (immediately after fresh boot):

# ip link set eth0 up  <- eth0 is BE3 PF
be2net 0000:01:00.0 eth0: Link is Up

# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create 1 VF
...
be2net 0000:01:04.0: Emulex OneConnect(be3): VF  port 0

# ip link set eth8 up  <- eth8 is created privileged VF
be2net 0000:01:04.0: opcode 59-1 failed:status 1-76
RTNETLINK answers: Input/output error

# echo 0 > /sys/class/net/eth0/device/sriov_numvfs  <- Delete VF
iommu: Removing device 0000:01:04.0 from group 33
...

# echo 1 > /sys/class/net/eth0/device/sriov_numvfs  <- Create it again
iommu: Removing device 0000:01:04.0 from group 33
...

# ip link set eth8 up
be2net 0000:01:04.0 eth8: Link is Up

Initialization is now OK.

v2 - Corrected the comment and condition check suggested by Suresh & Harsha

Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs")
Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ivan Vecera <cera@cera.cz>
Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'perf-core-for-mingo-4.11-20170201' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Wed, 1 Feb 2017 14:32:36 +0000 (15:32 +0100)]
Merge tag 'perf-core-for-mingo-4.11-20170201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Allow configuring a 'perf ftrace' default --tracer (Taeung Song)

Infrastructure changes:

- Sync tools/arch/{powerpc,arm}/include/uapi/asm/kvm.h and
       tools/arch/x86/include/asm/cpufeatures.h (Ingo Molnar)

- Add BPF program file system pinning APIs and respective
  'perf test' entry (Joe Stringer)

- Make tools tree support 'make -s' (Josh Poimboeuf)

- Reference count maps in callchains, fixing SEGFAULT when
  referencing maps after it is freed (Krister Johansen)

- Create for_each_event trace points iterator (Taeung Song)

- Do not consider an error not to have any perfconfig file
  (Arnaldo Carvalho de Melo

- Propagate perf_config() errors (Arnaldo Carvalho de Melo)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/intel/pt: Add format strings for PTWRITE and power event tracing
Alexander Shishkin [Fri, 27 Jan 2017 15:16:43 +0000 (17:16 +0200)]
perf/x86/intel/pt: Add format strings for PTWRITE and power event tracing

Commit:

  8ee83b2ab3 ("perf/x86/intel/pt: Add support for PTWRITE and power event tracing")

forgot to add format strings to the PT driver. So one could enable these features
by setting corresponding bits in the event config, but not by their mnemonic names.

This patch adds the format strings.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Fixes: 8ee83b2ab3 ("perf/x86/intel/pt: Add support for PTWRITE...")
Link: http://lkml.kernel.org/r/20170127151644.8585-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/intel/uncore: Make package handling more robust
Thomas Gleixner [Tue, 31 Jan 2017 22:58:40 +0000 (23:58 +0100)]
perf/x86/intel/uncore: Make package handling more robust

The package management code in uncore relies on package mapping being
available before a CPU is started. This changed with:

  9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")

because the ACPI/BIOS information turned out to be unreliable, but that
left uncore in broken state. This was not noticed because on a regular boot
all CPUs are online before uncore is initialized.

Move the allocation to the CPU online callback and simplify the hotplug
handling. At this point the package mapping is established and correct.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
Link: http://lkml.kernel.org/r/20170131230141.377156255@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/intel/uncore: Clean up hotplug conversion fallout
Thomas Gleixner [Tue, 31 Jan 2017 22:58:39 +0000 (23:58 +0100)]
perf/x86/intel/uncore: Clean up hotplug conversion fallout

The recent conversion to the hotplug state machine kept two mechanisms from
the original code:

 1) The first_init logic which adds the number of online CPUs in a package
    to the refcount. That's wrong because the callbacks are executed for
    all online CPUs.

    Remove it so the refcounting is correct.

 2) The on_each_cpu() call to undo box->init() in the error handling
    path. That's bogus because when the prepare callback fails no box has
    been initialized yet.

    Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Fixes: 1a246b9f58c6 ("perf/x86/intel/uncore: Convert to hotplug state machine")
Link: http://lkml.kernel.org/r/20170131230141.298032324@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/intel/rapl: Make package handling more robust
Thomas Gleixner [Tue, 31 Jan 2017 22:58:38 +0000 (23:58 +0100)]
perf/x86/intel/rapl: Make package handling more robust

The package management code in RAPL relies on package mapping being
available before a CPU is started. This changed with:

  9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")

because the ACPI/BIOS information turned out to be unreliable, but that
left RAPL in broken state. This was not noticed because on a regular boot
all CPUs are online before RAPL is initialized.

A possible fix would be to reintroduce the mess which allocates a package
data structure in CPU prepare and when it turns out to already exist in
starting throw it away later in the CPU online callback. But that's a
horrible hack and not required at all because RAPL becomes functional for
perf only in the CPU online callback. That's correct because user space is
not yet informed about the CPU being onlined, so nothing caan rely on RAPL
being available on that particular CPU.

Move the allocation to the CPU online callback and simplify the hotplug
handling. At this point the package mapping is established and correct.

This also adds a missing check for available package data in the
event_init() function.

Reported-by: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 9d85eb9119f4 ("x86/smpboot: Make logical package management more robust")
Link: http://lkml.kernel.org/r/20170131230141.212593966@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoxtensa: fix noMMU build on cores with MMU
Max Filippov [Wed, 1 Feb 2017 02:35:37 +0000 (18:35 -0800)]
xtensa: fix noMMU build on cores with MMU

Commit bf15f86b343ed8 ("xtensa: initialize MMU before jumping to reset
vector") calls MMU management functions even when CONFIG_MMU is not
selected. That breaks noMMU build on cores with MMU.

Don't manage MMU when CONFIG_MMU is not selected.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
7 years agoMerge tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Wed, 1 Feb 2017 00:32:40 +0000 (16:32 -0800)]
Merge tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "It was reported to me that the thread created by the hwlat tracer does
  not migrate after the first instance. I found that there was as small
  bug in the logic, and fixed it. It's minor, but should be fixed
  regardless. There's not much impact outside the hwlat tracer"

* tag 'trace-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix hwlat kthread migration

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 31 Jan 2017 21:59:10 +0000 (13:59 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem fixes from Dmitry Torokhov:
 "A fix for a crash in the wm97xx driver and synaptics-rmi4 will stop
  throwing erroneous warnings."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake
  Input: wm97xx - make missing platform data non-fatal

7 years agoMerge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Tue, 31 Jan 2017 21:54:41 +0000 (13:54 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
 "The cgroup creation path was getting the order of operations wrong and
  exposing cgroups which don't have their names set yet to controllers
  which can lead to NULL derefs.

  This contains the fix for the bug"

* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: don't online subsystems before cgroup_name/path() are operational

7 years agoMerge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Tue, 31 Jan 2017 21:10:59 +0000 (13:10 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

Pull percpu fix from Tejun Heo:
 "Douglas found and fixed a ref leak bug in percpu_ref_tryget[_live]().

  The bug is caused by storing the return value of atomic_long_inc_not_zero()
  into an int temp variable before returning it as a bool. The interim
  cast to int loses the upper bits and can lead to false negatives. As
  percpu_ref uses a high bit to mark a draining counter, this can happen
  relatively easily.

  Fixed by using bool for the temp variable"

* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-refcount: fix reference leak during percpu-atomic transition

7 years agoMerge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Tue, 31 Jan 2017 21:07:04 +0000 (13:07 -0800)]
Merge branch 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
 "Three libata fixes: an error handling fix, blacklist addition for
  another fallout from upping the default max sectors, and fix for a
  sense data reporting bug which affects new harddrives which can report
  sense data"

* 'for-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: sata_mv:- Handle return value of devm_ioremap.
  libata: Fix ATA request sense
  libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 31 Jan 2017 21:05:15 +0000 (13:05 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

 - regression fix (sleeping while atomic) for cp2112, from Johan Hovold

 - regression fix for proximity handling under certain circumstances in
   Wacom driver, from Jason Gerecke

 - functional fix for Logitech Rumblepad 2, from Ardinartsev Nikita

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: cp2112: fix gpio-callback error handling
  HID: cp2112: fix sleep-while-atomic
  HID: hid-lg: Fix immediate disconnection of Logitech Rumblepad 2
  HID: usbhid: Quirk a AMI virtual mouse and keyboard with ALWAYS_POLL
  HID: wacom: Fix poor prox handling in 'wacom_pl_irq'

7 years agox86/mce: Make timer handling more robust
Thomas Gleixner [Tue, 31 Jan 2017 08:37:34 +0000 (09:37 +0100)]
x86/mce: Make timer handling more robust

Erik reported that on a preproduction hardware a CMCI storm triggers the
BUG_ON in add_timer_on(). The reason is that the per CPU MCE timer is
started by the CMCI logic before the MCE CPU hotplug callback starts the
timer with add_timer_on(). So the timer is already queued which triggers
the BUG.

Using add_timer_on() is pretty pointless in this code because the timer is
strictlty per CPU, initialized as pinned and all operations which arm the
timer happen on the CPU to which the timer belongs.

Simplify the whole machinery by using mod_timer() instead of add_timer_on()
which avoids the problem because mod_timer() can handle already queued
timers. Use __start_timer() everywhere so the earliest armed expiry time is
preserved.

Reported-by: Erik Veijola <erik.veijola@intel.com>
Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701310936080.3457@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
7 years agoMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Tue, 31 Jan 2017 20:36:39 +0000 (12:36 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fix from Steve French:
 "A small cifs fix for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: initialize file_info_lock

7 years agoperf ftrace: Add ftrace.tracer config option
Taeung Song [Tue, 31 Jan 2017 11:38:29 +0000 (20:38 +0900)]
perf ftrace: Add ftrace.tracer config option

Currently 'perf ftrace' command allows selecting 'function_graph' or
'function', defaulting to 'function_graph'.

Add ftrace.tracer config option to select the default tracer:

    # cat ~/.perfconfig
    [ftrace]
        tracer = function

    # perf ftrace usleep 123456 | head -10
      <...>-14450 [002] d... 10089.284231: finish_task_switch <-__schedule
      <...>-14450 [002] .... 10089.284232: finish_wait <-pipe_wait
      <...>-14450 [002] .... 10089.284232: mutex_lock <-pipe_wait
      <...>-14450 [002] .... 10089.284232: _cond_resched <-mutex_lock

Committer notes:

Retesting it with invalid variables, invalid values for ftrace.tracer,
and a valid one:

  # cat ~/.perfconfig
  [ftrace]
        trace = function
  # perf ftrace usleep 1
  Error: wrong config key-value pair ftrace.trace=function
  # cat ~/.perfconfig
  [ftrace]
        tracer = functin
  # perf ftrace usleep 1
  Please select "function_graph" (default) or "function"
  Error: wrong config key-value pair ftrace.tracer=functin
  # cat ~/.perfconfig
  [ftrace]
        tracer = function
  # perf ftrace usleep 1 | head -5
          <idle>-0     [000] d...  3855.820847: switch_mm_irqs_off <-__schedule
           <...>-18550 [000] d...  3855.820849: finish_task_switch <-__schedule
           <...>-18550 [000] d...  3855.820851: smp_irq_work_interrupt <-irq_work_interrupt
           <...>-18550 [000] d...  3855.820851: irq_enter <-smp_irq_work_interrupt
           <...>-18550 [000] d...  3855.820851: rcu_irq_enter <-irq_enter
  #

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485862711-20216-3-git-send-email-treeze.taeung@gmail.com
[ Added missign space in error message, changed the logic to make it more compact and less error prone ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf tools: Create for_each_event macro for tracepoints iteration
Taeung Song [Tue, 31 Jan 2017 11:38:28 +0000 (20:38 +0900)]
perf tools: Create for_each_event macro for tracepoints iteration

Similar to for_each_subsystem and for_each_event in util/parse-events.c,
add new macro 'for_each_event' for easy iteration over the tracepoints
in order to be more compact and readable.

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485862711-20216-2-git-send-email-treeze.taeung@gmail.com
[ Slight change to keep existing style for checking strcmp() return ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf test: Add libbpf pinning test
Joe Stringer [Thu, 26 Jan 2017 21:20:01 +0000 (13:20 -0800)]
perf test: Add libbpf pinning test

Add a test for the newly added BPF object pinning functionality.

For example:

  # tools/perf/perf test 37
    37: BPF filter                                 :
    37.1: Basic BPF filtering                      : Ok
    37.2: BPF pinning                              : Ok
    37.3: BPF prologue generation                  : Ok
    37.4: BPF relocation checker                   : Ok

  # tools/perf/perf test 37 -v 2>&1 | grep pinned
    libbpf: pinned map '/sys/fs/bpf/perf_test/flip_table'
    libbpf: pinned program '/sys/fs/bpf/perf_test/func=SyS_epoll_wait/0'

Signed-off-by: Joe Stringer <joe@ovn.org>
Requested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-7-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools lib api fs: Add bpf_fs filesystem detector
Joe Stringer [Thu, 26 Jan 2017 21:20:00 +0000 (13:20 -0800)]
tools lib api fs: Add bpf_fs filesystem detector

Allow mounting of the BPF filesystem at /sys/fs/bpf.

Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-6-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools perf util: Make rm_rf(path) argument const
Joe Stringer [Thu, 26 Jan 2017 21:19:59 +0000 (13:19 -0800)]
tools perf util: Make rm_rf(path) argument const

rm_rf() doesn't modify its path argument, and a future caller will pass
a string constant into it to delete.

Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools lib bpf: Add bpf_object__pin()
Joe Stringer [Thu, 26 Jan 2017 21:19:58 +0000 (13:19 -0800)]
tools lib bpf: Add bpf_object__pin()

Add a new API to pin a BPF object to the filesystem. The user can
specify the path within a BPF filesystem to pin the object.
Programs will be pinned under a subdirectory named the same as the
program, with each instance appearing as a numbered file under that
directory, and maps will be pinned under the path using the name of
the map as the file basename.

For example, with the directory '/sys/fs/bpf/foo' and a BPF object which
contains two instances of a program named 'bar', and a map named 'baz':

/sys/fs/bpf/foo/bar/0
/sys/fs/bpf/foo/bar/1
/sys/fs/bpf/foo/baz

Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-4-joe@ovn.org
[ Check snprintf >= for truncation, as snprintf(bf, size, ...) == size also means truncation ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools lib bpf: Add bpf_map__pin()
Joe Stringer [Thu, 26 Jan 2017 21:19:57 +0000 (13:19 -0800)]
tools lib bpf: Add bpf_map__pin()

Add a new API to pin a BPF map to the filesystem. The user can specify
the path full path within a BPF filesystem to pin the map.

Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-3-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agotools lib bpf: Add BPF program pinning APIs
Joe Stringer [Thu, 26 Jan 2017 21:19:56 +0000 (13:19 -0800)]
tools lib bpf: Add BPF program pinning APIs

Add new APIs to pin a BPF program (or specific instances) to the
filesystem.  The user can specify the path full path within a BPF
filesystem to pin the program.

bpf_program__pin_instance(prog, path, n) will pin the nth instance of
'prog' to the specified path.

bpf_program__pin(prog, path) will create the directory 'path' (if it
does not exist) and pin each instance within that directory. For
instance, path/0, path/1, path/2.

Committer notes:

- Add missing headers for mkdir()

- Check strdup() for failure

- Check snprintf >= size, not >, as == also means truncated, see 'man
  snprintf', return value.

- Conditionally define BPF_FS_MAGIC, as it isn't in magic.h in older
  systems and we're not yet having a tools/include/uapi/linux/magic.h
  copy.

- Do not include linux/magic.h, not present in older distros.

Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-2-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agoperf callchain: Reference count maps
Krister Johansen [Fri, 6 Jan 2017 06:23:31 +0000 (22:23 -0800)]
perf callchain: Reference count maps

If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor.  Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.

Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa2889 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agofscache: Fix dead object requeue
David Howells [Tue, 31 Jan 2017 09:45:28 +0000 (09:45 +0000)]
fscache: Fix dead object requeue

Under some circumstances, an fscache object can become queued such that it
fscache_object_work_func() can be called once the object is in the
OBJECT_DEAD state.  This results in the kernel oopsing when it tries to
invoke the handler for the state (which is hard coded to 0x2).

The way this comes about is something like the following:

 (1) The object dispatcher is processing a work state for an object.  This
     is done in workqueue context.

 (2) An out-of-band event comes in that isn't masked, causing the object to
     be queued, say EV_KILL.

 (3) The object dispatcher finishes processing the current work state on
     that object and then sees there's another event to process, so,
     without returning to the workqueue core, it processes that event too.
     It then follows the chain of events that initiates until we reach
     OBJECT_DEAD without going through a wait state (such as
     WAIT_FOR_CLEARANCE).

     At this point, object->events may be 0, object->event_mask will be 0
     and oob_event_mask will be 0.

 (4) The object dispatcher returns to the workqueue processor, and in due
     course, this sees that the object's work item is still queued and
     invokes it again.

 (5) The current state is a work state (OBJECT_DEAD), so the dispatcher
     jumps to it - resulting in an OOPS.

When I'm seeing this, the work state in (1) appears to have been either
LOOK_UP_OBJECT or CREATE_OBJECT (object->oob_table is
fscache_osm_lookup_oob).

The window for (2) is very small:

 (A) object->event_mask is cleared whilst the event dispatch process is
     underway - though there's no memory barrier to force this to the top
     of the function.

     The window, therefore is from the time the object was selected by the
     workqueue processor and made requeueable to the time the mask was
     cleared.

 (B) fscache_raise_event() will only queue the object if it manages to set
     the event bit and the corresponding event_mask bit was set.

     The enqueuement is then deferred slightly whilst we get a ref on the
     object and get the per-CPU variable for workqueue congestion.  This
     slight deferral slightly increases the probability by allowing extra
     time for the workqueue to make the item requeueable.

Handle this by giving the dead state a processor function and checking the
for the dead state address rather than seeing if the processor function is
address 0x2.  The dead state processor function can then set a flag to
indicate that it's occurred and give a warning if it occurs more than once
per object.

If this race occurs, an oops similar to the following is seen (note the RIP
value):

BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
IP: [<0000000000000002>] 0x1
PGD 0
Oops: 0010 [#1] SMP
Modules linked in: ...
CPU: 17 PID: 16077 Comm: kworker/u48:9 Not tainted 3.10.0-327.18.2.el7.x86_64 #1
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
Workqueue: fscache_object fscache_object_work_func [fscache]
task: ffff880302b63980 ti: ffff880717544000 task.ti: ffff880717544000
RIP: 0010:[<0000000000000002>]  [<0000000000000002>] 0x1
RSP: 0018:ffff880717547df8  EFLAGS: 00010202
RAX: ffffffffa0368640 RBX: ffff880edf7a4480 RCX: dead000000200200
RDX: 0000000000000002 RSI: 00000000ffffffff RDI: ffff880edf7a4480
RBP: ffff880717547e18 R08: 0000000000000000 R09: dfc40a25cb3a4510
R10: dfc40a25cb3a4510 R11: 0000000000000400 R12: 0000000000000000
R13: ffff880edf7a4510 R14: ffff8817f6153400 R15: 0000000000000600
FS:  0000000000000000(0000) GS:ffff88181f420000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000002 CR3: 000000000194a000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffffffffa0363695 ffff880edf7a4510 ffff88093f16f900 ffff8817faa4ec00
 ffff880717547e60 ffffffff8109d5db 00000000faa4ec18 0000000000000000
 ffff8817faa4ec18 ffff88093f16f930 ffff880302b63980 ffff88093f16f900
Call Trace:
 [<ffffffffa0363695>] ? fscache_object_work_func+0xa5/0x200 [fscache]
 [<ffffffff8109d5db>] process_one_work+0x17b/0x470
 [<ffffffff8109e4ac>] worker_thread+0x21c/0x400
 [<ffffffff8109e290>] ? rescuer_thread+0x400/0x400
 [<ffffffff810a5acf>] kthread+0xcf/0xe0
 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140
 [<ffffffff816460d8>] ret_from_fork+0x58/0x90
 [<ffffffff810a5a00>] ? kthread_create_on_node+0x140/0x140

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeremy McNicoll <jeremymc@redhat.com>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
7 years agofscache: Clear outstanding writes when disabling a cookie
David Howells [Wed, 18 Jan 2017 14:29:25 +0000 (14:29 +0000)]
fscache: Clear outstanding writes when disabling a cookie

fscache_disable_cookie() needs to clear the outstanding writes on the
cookie it's disabling because they cannot be completed after.

Without this, fscache_nfs_open_file() gets stuck because it disables the
cookie when the file is opened for writing but can't uncache the pages till
afterwards - otherwise there's a race between the open routine and anyone
who already has it open R/O and is still reading from it.

Looking in /proc/pid/stack of the offending process shows:

[<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache]
[<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache]
[<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs]
[<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4]
[<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7
[<ffffffff811743ac>] vfs_open+0x5c/0x65
[<ffffffff81184185>] path_openat+0x785/0x8fb
[<ffffffff81184343>] do_filp_open+0x48/0x9e
[<ffffffff81174710>] do_sys_open+0x13b/0x1cb
[<ffffffff811747b9>] SyS_open+0x19/0x1b
[<ffffffff81001c44>] do_syscall_64+0x80/0x17a
[<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a
[<ffffffffffffffff>] 0xffffffffffffffff

Reported-by: Jianhong Yin <jiyin@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
7 years agoFS-Cache: Initialise stores_lock in netfs cookie
David Howells [Wed, 18 Jan 2017 14:29:17 +0000 (14:29 +0000)]
FS-Cache: Initialise stores_lock in netfs cookie

Initialise the stores_lock in fscache netfs cookies.  Technically, it
shouldn't be necessary, since the netfs cookie is an index and stores no
data, but initialising it anyway adds insignificant overhead.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
7 years agoipv6: fix flow labels when the traffic class is non-0
Dimitris Michailidis [Mon, 30 Jan 2017 22:09:42 +0000 (14:09 -0800)]
ipv6: fix flow labels when the traffic class is non-0

ip6_make_flowlabel() determines the flow label for IPv6 packets. It's
supposed to be passed a flow label, which it returns as is if non-0 and
in some other cases, otherwise it calculates a new value.

The problem is callers often pass a flowi6.flowlabel, which may also
contain traffic class bits. If the traffic class is non-0
ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and
returns the whole thing. Thus it can return a 'flow label' longer than
20b and the low 20b of that is typically 0 resulting in packets with 0
label. Moreover, different packets of a flow may be labeled differently.
For a TCP flow with ECN non-payload and payload packets get different
labels as exemplified by this pair of consecutive packets:

(pure ACK)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49
    Payload Length: 32
    Next Header: TCP (6)

(payload)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000
    Payload Length: 688
    Next Header: TCP (6)

This patch allows ip6_make_flowlabel() to be passed more than just a
flow label and has it extract the part it really wants. This was simpler
than modifying the callers. With this patch packets like the above become

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 32
    Next Header: TCP (6)

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 688
    Next Header: TCP (6)

Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: thunderx: avoid dereferencing xcv when NULL
Vincent [Mon, 30 Jan 2017 14:06:43 +0000 (15:06 +0100)]
net: thunderx: avoid dereferencing xcv when NULL

This fixes the following smatch and coccinelle warnings:

  drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119 xcv_setup_link() error: we previously assumed 'xcv' could be null (see line 118) [smatch]
  drivers/net/ethernet/cavium/thunder/thunder_xcv.c:119:16-20: ERROR: xcv is NULL but dereferenced. [coccinelle]

Fixes: 6465859aba1e66a5 ("net: thunderx: Add RGMII interface type support")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosvcrpc: fix oops in absence of krb5 module
J. Bruce Fields [Tue, 31 Jan 2017 16:37:50 +0000 (11:37 -0500)]
svcrpc: fix oops in absence of krb5 module

Olga Kornievskaia says: "I ran into this oops in the nfsd (below)
(4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try
to mount the server with krb5 where the server doesn't have the
rpcsec_gss_krb5 module built."

The problem is that rsci.cred is copied from a svc_cred structure that
gss_proxy didn't properly initialize.  Fix that.

[120408.542387] general protection fault: 0000 [#1] SMP
...
[120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16
[120408.567037] Hardware name: VMware, Inc. VMware Virtual =
Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000
[120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss]
...
[120408.584946]  ? rsc_free+0x55/0x90 [auth_rpcgss]
[120408.585901]  gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss]
[120408.587017]  svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss]
[120408.588257]  ? __enqueue_entity+0x6c/0x70
[120408.589101]  svcauth_gss_accept+0x391/0xb90 [auth_rpcgss]
[120408.590212]  ? try_to_wake_up+0x4a/0x360
[120408.591036]  ? wake_up_process+0x15/0x20
[120408.592093]  ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc]
[120408.593177]  svc_authenticate+0xe1/0x100 [sunrpc]
[120408.594168]  svc_process_common+0x203/0x710 [sunrpc]
[120408.595220]  svc_process+0x105/0x1c0 [sunrpc]
[120408.596278]  nfsd+0xe9/0x160 [nfsd]
[120408.597060]  kthread+0x101/0x140
[120408.597734]  ? nfsd_destroy+0x60/0x60 [nfsd]
[120408.598626]  ? kthread_park+0x90/0x90
[120408.599448]  ret_from_fork+0x22/0x30

Fixes: 1d658336b05f "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth"
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
7 years agonfsd: special case truncates some more
Christoph Hellwig [Tue, 24 Jan 2017 08:22:41 +0000 (09:22 +0100)]
nfsd: special case truncates some more

Both the NFS protocols and the Linux VFS use a setattr operation with a
bitmap of attributs to set to set various file attributes including the
file size and the uid/gid.

The Linux syscalls never mixes size updates with unrelated updates like
the uid/gid, and some file systems like XFS and GFS2 rely on the fact
that truncates might not update random other attributes, and many other
file systems handle the case but do not update the different attributes
in the same transaction.  NFSD on the other hand passes the attributes
it gets on the wire more or less directly through to the VFS, leading to
updates the file systems don't expect.  XFS at least has an assert on
the allowed attributes, which caught an unusual NFS client setting the
size and group at the same time.

To handle this issue properly this switches nfsd to call vfs_truncate
for size changes, and then handle all other attributes through
notify_change.  As a side effect this also means less boilerplace code
around the size change as we can now reuse the VFS code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
7 years agoNFSD: Fix a null reference case in find_or_create_lock_stateid()
Kinglong Mee [Wed, 18 Jan 2017 11:04:42 +0000 (19:04 +0800)]
NFSD: Fix a null reference case in find_or_create_lock_stateid()

nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid().

If nfsd doesn't go through init_lock_stateid() and put stateid at end,
there is a NULL reference to .sc_free when calling nfs4_put_stid(ns).

This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid().

Cc: stable@vger.kernel.org
Fixes: 356a95ece7aa "nfsd: clean up races in lock stateid searching..."
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
7 years agotracing: Fix hwlat kthread migration
Steven Rostedt (VMware) [Tue, 31 Jan 2017 00:27:10 +0000 (19:27 -0500)]
tracing: Fix hwlat kthread migration

The hwlat tracer creates a kernel thread at start of the tracer. It is
pinned to a single CPU and will move to the next CPU after each period of
running. If the user modifies the migration thread's affinity, it will not
change after that happens.

The original code created the thread at the first instance it was called,
but later was changed to destroy the thread after the tracer was finished,
and would not be created until the next instance of the tracer was
established. The code that initialized the affinity was only called on the
initial instantiation of the tracer. After that, it was not initialized, and
the previous affinity did not match the current newly created one, making
it appear that the user modified the thread's affinity when it did not, and
the thread failed to migrate again.

Cc: stable@vger.kernel.org
Fixes: 0330f7aa8ee6 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
7 years agoHID: cp2112: fix gpio-callback error handling
Johan Hovold [Mon, 30 Jan 2017 10:26:39 +0000 (11:26 +0100)]
HID: cp2112: fix gpio-callback error handling

In case of a zero-length report, the gpio direction_input callback would
currently return success instead of an errno.

Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
7 years agoHID: cp2112: fix sleep-while-atomic
Johan Hovold [Mon, 30 Jan 2017 10:26:38 +0000 (11:26 +0100)]
HID: cp2112: fix sleep-while-atomic

A recent commit fixing DMA-buffers on stack added a shared transfer
buffer protected by a spinlock. This is broken as the USB HID request
callbacks can sleep. Fix this up by replacing the spinlock with a mutex.

Fixes: 1ffb3c40ffb5 ("HID: cp2112: make transfer buffers DMA capable")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
7 years agoInput: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake
Christophe JAILLET [Tue, 31 Jan 2017 08:47:30 +0000 (00:47 -0800)]
Input: synaptics-rmi4 - fix reversed conditions in enable/disable_irq_wake

These tests are reversed.  A warning should be displayed if an error is
returned, not on success.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Mon, 30 Jan 2017 23:47:19 +0000 (15:47 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
 "Several small bug fixes and tidies, along with a fix for non-resumable
  memory errors triggered by userspace"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Handle PIO & MEM non-resumable errors.
  sparc64: Zero pages on allocation for mondo and error queues.
  sparc: Fixed typo in sstate.c. Replaced panicing with panicking
  sparc: use symbolic names for tsb indexing

7 years agoMerge branch 'sparc64-non-resumable-user-error-recovery'
David S. Miller [Mon, 30 Jan 2017 22:28:22 +0000 (14:28 -0800)]
Merge branch 'sparc64-non-resumable-user-error-recovery'

Liam R. Howlett says:

====================
sparc64: Recover from userspace non-resumable PIO & MEM errors

A non-resumable error from userspace is able to cause a kernel panic or trap
loop due to the setup and handling of the queued traps once in the kernel.
This patch series addresses both of these issues.

The queues are fixed by simply zeroing the memory before use.

PIO errors from userspace will result in a SIGBUS being sent to the user
process.

The MEM errors form userspace will result in a SIGKILL and also cause the
offending pages to be claimed so they are no longer used in future tasks.
SIGKILL is used to ensure that the process does not try to coredump and result
in an attempt to read the memory again from within kernel space.  Although
there is a HV call to scrub the memory (mem_scrub), there is no easy way to
guarantee that the real memory address(es) are not used by other tasks.
Clearing the error with mem_scrub would zero the memory and cause the other
processes to proceed with bad data.

The handling of other non-resumable errors remain unchanged and will cause a
panic.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosparc64: Handle PIO & MEM non-resumable errors.
Liam R. Howlett [Tue, 17 Jan 2017 15:59:03 +0000 (10:59 -0500)]
sparc64: Handle PIO & MEM non-resumable errors.

User processes trying to access an invalid memory address via PIO will
receive a SIGBUS signal instead of causing a panic.  Memory errors will
receive a SIGKILL since a SIGBUS may result in a coredump which may
attempt to repeat the faulting access.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosparc64: Zero pages on allocation for mondo and error queues.
Liam R. Howlett [Tue, 17 Jan 2017 15:59:02 +0000 (10:59 -0500)]
sparc64: Zero pages on allocation for mondo and error queues.

Error queues use a non-zero first word to detect if the queues are full.
Using pages that have not been zeroed may result in false positive
overflow events.  These queues are set up once during boot so zeroing
all mondo and error queue pages is safe.

Note that the false positive overflow does not always occur because the
page allocation for these queues is so early in the boot cycle that
higher number CPUs get fresh pages.  It is only when traps are serviced
with lower number CPUs who were given already used pages that this issue
is exposed.

Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/sched: cls_flower: Correct matching on ICMPv6 code
Simon Horman [Mon, 30 Jan 2017 15:19:02 +0000 (16:19 +0100)]
net/sched: cls_flower: Correct matching on ICMPv6 code

When matching on the ICMPv6 code ICMPV6_CODE rather than
ICMPV4_CODE attributes should be used.

This corrects what appears to be a typo.

Sample usage:

tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
indev eth0 ip_proto icmpv6 type 128 code 0 action drop

Without this change the code parameter above is effectively ignored.

Fixes: 7b684884fbfa ("net/sched: cls_flower: Support matching on ICMP type and code")
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'linux-can-fixes-for-4.10-20170130' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Mon, 30 Jan 2017 21:38:39 +0000 (16:38 -0500)]
Merge tag 'linux-can-fixes-for-4.10-20170130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2017-01-30

this is a pull request of one patch.

The patch is by Oliver Hartkopp and fixes the hrtimer/tasklet termination in
bcm op removal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni...
Linus Torvalds [Mon, 30 Jan 2017 21:18:12 +0000 (13:18 -0800)]
Merge tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC fix from Alexandre Belloni:
 "A single fix for this cycle. It is worth taking it for 4.10 so that
  distributions will not have CONFIG_RTC_DRV_JZ4740 switching from m to
  y in their config.

  Summary:
   - Allow jz4740 to build as a module again by using kernel_halt()"

* tag 'rtc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: jz4740: make the driver buildable as a module again

7 years agoipv6: Paritially checksum full MTU frames
Vlad Yasevich [Mon, 30 Jan 2017 03:52:53 +0000 (22:52 -0500)]
ipv6: Paritially checksum full MTU frames

IPv6 will mark data that is smaller that mtu - headersize as
CHECKSUM_PARTIAL, but if the data will completely fill the mtu,
the packet checksum will be computed in software instead.
Extend the conditional to include the data that fills the mtu
as well.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4_core: Avoid command timeouts during VF driver device shutdown
Jack Morgenstein [Mon, 30 Jan 2017 13:11:45 +0000 (15:11 +0200)]
net/mlx4_core: Avoid command timeouts during VF driver device shutdown

Some Hypervisors detach VFs from VMs by instantly causing an FLR event
to be generated for a VF.

In the mlx4 case, this will cause that VF's comm channel to be disabled
before the VM has an opportunity to invoke the VF device's "shutdown"
method.

The result is that the VF driver on the VM will experience a command
timeout during the shutdown process when the Hypervisor does not deliver
a command-completion event to the VM.

To avoid FW command timeouts on the VM when the driver's shutdown method
is invoked, we detect the absence of the VF's comm channel at the very
start of the shutdown process. If the comm-channel has already been
disabled, we cause all FW commands during the device shutdown process to
immediately return success (and thus avoid all command timeouts).

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'mlx5-fixes-2017-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Mon, 30 Jan 2017 20:44:05 +0000 (15:44 -0500)]
Merge tag 'mlx5-fixes-2017-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2017-01-27

A couple of mlx5 core and ethernet driver fixes.

From Or, A couple of error return values and error handling fixes.
From Hadar, Support TC encapsulation offloads even when the mlx5e uplink
device is stacked  under an upper device.
From Gal, Two patches to fix RSS hash modifications via ethtool.
From Moshe, Added a needed ets capability check.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'wireless-drivers-for-davem-2017-01-29' of git://git.kernel.org/pub/scm...
David S. Miller [Mon, 30 Jan 2017 20:19:23 +0000 (15:19 -0500)]
Merge tag 'wireless-drivers-for-davem-2017-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.10

Most important here are fixes to two iwlwifi crashes, but there's also
a firmware naming fix for iwlwifi and a revert of an older bcma patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agotools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h, {tools/,}arch/x86...
Ingo Molnar [Mon, 30 Jan 2017 08:11:31 +0000 (09:11 +0100)]
tools headers: Sync {tools/,}arch/powerpc/include/uapi/asm/kvm.h, {tools/,}arch/x86/include/asm/cpufeatures.h and {tools/,}arch/arm/include/uapi/asm/kvm.h

The following upstream headers were updated:

 - The x86 cpufeatures.h file picked up a couple of new feature entries
 - The PowerPC and ARM KVM headers picked up new features

None of which requires changes to perf tooling, so refresh the tooling copy.

Solves these build time warnings:

 Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
 Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
 Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170130081131.GA8322@gmail.com
[ resync tools/arch/x86/include/asm/cpufeatures.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agogianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page
Arseny Solokha [Sun, 29 Jan 2017 12:52:20 +0000 (19:52 +0700)]
gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page

In spite of switching to paged allocation of Rx buffers, the driver still
called dma_unmap_single() in the Rx queues tear-down path.

The DMA region unmapping code in free_skb_rx_queue() basically predates
the introduction of paged allocation to the driver. While being refactored,
it apparently hasn't reflected the change in the DMA API usage by its
counterpart gfar_new_page().

As a result, setting an interface to the DOWN state now yields the following:

  # ip link set eth2 down
  fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40]
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28
  CPU: 1 PID: 189 Comm: ip Tainted: G           O    4.9.5 #1
  task: dee73400 task.stack: dede2000
  NIP: c02101e8 LR: c02101e8 CTR: c0260d74
  REGS: dede3bb0 TRAP: 0700   Tainted: G           O     (4.9.5)
  MSR: 00021000 <CE,ME>  CR: 28002222  XER: 00000000

  GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000
  GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000
  GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000
  GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540
  NIP [c02101e8] check_unmap+0x8e0/0xa28
  LR [c02101e8] check_unmap+0x8e0/0xa28
  Call Trace:
  [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable)
  [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c
  [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404
  [dede3d80] [c02e39b4] gfar_close+0x24/0xc8
  [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8
  [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c
  [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174
  [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60
  [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824
  [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298
  [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854
  [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74
  [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c
  --- interrupt: c01 at 0xff45da0
      LR = 0xff45cd0
  Instruction dump:
  811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052
  386309ac 90c10008 4cc63182 4826b845 <0fe000004bfffa60 3c80c052 388402c4
  ---[ end trace 695ae6d7ac1d0c47 ]---
  Mapped at:
   [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248
   [<c02e3ef0>] startup_gfar+0x368/0x570
   [<c036aeb4>] __dev_open+0xdc/0x150
   [<c036b1b8>] __dev_change_flags+0xa0/0x174
   [<c036b2ac>] dev_change_flags+0x20/0x60

Even though the issue was discovered in 4.9 kernel, the code in question
is identical in the current net and net-next trees.

Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethtool: add support for 2500BaseT and 5000BaseT link modes
Pavel Belous [Sat, 28 Jan 2017 19:53:28 +0000 (22:53 +0300)]
net: ethtool: add support for 2500BaseT and 5000BaseT link modes

This patch introduce support for 2500BaseT and 5000BaseT link modes.
These modes are included in the new IEEE 802.3bz standard.

Signed-off-by: Pavel Belous <pavel.s.belous@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agopinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler
Alexander Stein [Mon, 30 Jan 2017 11:35:28 +0000 (12:35 +0100)]
pinctrl: baytrail: Add missing spinlock usage in byt_gpio_irq_handler

According to VLI64 Intel Atom E3800 Specification Update (#329901)
concurrent read accesses may result in returning 0xffffffff and write
accesses may be dropped silently.
To workaround all accesses must be protected by locks.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
7 years agopinctrl: baytrail: Debounce register is one per community
Andy Shevchenko [Thu, 26 Jan 2017 17:24:08 +0000 (19:24 +0200)]
pinctrl: baytrail: Debounce register is one per community

Debounce value is set globally per community. Otherwise user will easily
get a kernel crash when they start using the feature:

BUG: unable to handle kernel paging request at ffffc900003be000
IP: byt_gpio_dbg_show+0xa9/0x430

Make it clear in byt_gpio_reg().

Note that this fix just prevents kernel to crash, but doesn't make any
difference to the existing logic. It means the last caller will win the
trade and debounce value will be configured accordingly. The actual
logic fix needs to be thought about and it's not as important as crash
fix. That's why the latter goes separately and right now.

Fixes: 658b476c742f ("pinctrl: baytrail: Add debounce configuration")
Cc: Cristina Ciocan <cristina.ciocan@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
7 years agopinctrl: baytrail: Rectify debounce support (part 2)
Andy Shevchenko [Thu, 26 Jan 2017 17:24:07 +0000 (19:24 +0200)]
pinctrl: baytrail: Rectify debounce support (part 2)

The commit 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support")
almost fixes the logic of debuonce but missed couple of things, i.e.
typo in mask when disabling debounce and lack of enabling it back.

This patch addresses above issues.

Reported-by: Jean Delvare <jdelvare@suse.de>
Fixes: 04ff5a095d66 ("pinctrl: baytrail: Rectify debounce support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
7 years agoperf/x86/events: Add an AMD-specific Makefile
Borislav Petkov [Thu, 26 Jan 2017 08:08:19 +0000 (09:08 +0100)]
perf/x86/events: Add an AMD-specific Makefile

Move the AMD pieces from the generic Makefile so that

  $ make arch/x86/events/amd/<file>.s

can work too. Otherwise you get:

  $ make arch/x86/events/amd/ibs.s
  scripts/Makefile.build:44: arch/x86/events/amd/Makefile: No such file or directory
  make[1]: *** No rule to make target 'arch/x86/events/amd/Makefile'.  Stop.
  Makefile:1636: recipe for target 'arch/x86/events/amd/ibs.s' failed
  make: *** [arch/x86/events/amd/ibs.s] Error 2

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170126080819.417-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/amd/uncore: Update sysfs attributes for Family17h processors
Janakarajan Natarajan [Mon, 16 Jan 2017 23:36:23 +0000 (17:36 -0600)]
perf/x86/amd/uncore: Update sysfs attributes for Family17h processors

This patch updates the sysfs attributes for AMD Family17h processors. In
Family17h, the event bit position is changed for both the NorthBridge
and Last level cache counters.

The sysfs attributes are assigned based on the family and the type of
the counter.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/617570ed3634e804991f95db62c3cf3856a9d2a7.1484598705.git.Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/amd/uncore: Update the number of uncore counters
Janakarajan Natarajan [Mon, 16 Jan 2017 23:36:22 +0000 (17:36 -0600)]
perf/x86/amd/uncore: Update the number of uncore counters

This patch updates the AMD uncore driver to support AMD Family17h
processors. In Family17h, there are two extra last level cache counters.

The maximum available counters is increased and the number of counters
for each uncore type is now based on the family.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/799f9c5be8963cc209d9169a08f4a2643b748dc7.1484598705.git.Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/x86/amd/uncore: Rename 'L2' to 'LLC'
Janakarajan Natarajan [Mon, 16 Jan 2017 23:36:21 +0000 (17:36 -0600)]
perf/x86/amd/uncore: Rename 'L2' to 'LLC'

This patch renames L2 counters to LLC counters. In AMD Family17h
processors, L3 cache counter is supported.

Since older families have at most L2 counters, last level cache (LLC)
indicates L2/L3 based on the family.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/5d8cd8736d8d578354597a548e64ff16210c319b.1484598705.git.Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Try parent PMU first when initializing a child event
Kan Liang [Wed, 18 Jan 2017 13:21:01 +0000 (08:21 -0500)]
perf/core: Try parent PMU first when initializing a child event

perf has additional overhead when monitoring the task which
frequently generates child tasks.

perf_init_event() is one of the hotspots for the additional overhead:

Currently, to get the PMU, it tries to search the type in pmu_idr at
first. But it is not always successful, especially for the widely used
PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE events. So it has to go to the
slow path which go through the whole PMUs list.

It will be a big performance issue, if the PMUs list is long (e.g. server
with many uncore boxes) and the task frequently generates child tasks.

The child event inherits its parent event. So the child event should
try its parent PMU first.

Here is some data from the overhead test on Broadwell server:

  perf record -e $TEST_EVENTS -- ./loop.sh 50000

  loop.sh
    start=$(date +%s%N)
    i=0
    while [ "$i" -le "$1" ]
    do
            date > /dev/null
            i=`expr $i + 1`
    done
    end=$(date +%s%N)
    elapsed=`expr $end - $start`

  Event# Original elapsed time Elapsed time with patch delta
  1 196,573,192,397 189,162,029,998 -3.77%
  2 257,567,753,013 241,620,788,683 -6.19%
  4 398,730,726,971 370,518,938,714 -7.08%
  8 824,983,761,120 740,702,489,329 -10.22%
  16 1,883,411,923,498 1,672,027,508,355 -11.22%

... which shows a nice performance improvement.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1484745662-15928-2-git-send-email-kan.liang@intel.com
[ Tidied up the changelog and the code comment. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Optimize event rescheduling on active contexts
Alexander Shishkin [Thu, 19 Jan 2017 16:43:30 +0000 (18:43 +0200)]
perf/core: Optimize event rescheduling on active contexts

When new events are added to an active context, we go and reschedule
all cpu groups and all task groups in order to preserve the priority
(cpu pinned, task pinned, cpu flexible, task flexible), but in
reality we only need to reschedule groups of the same priority as
that of the events being added, and below.

This patch changes the behavior so that only groups that need to be
rescheduled are rescheduled.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170119164330.22887-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Don't re-schedule CPU flexible events needlessly
Alexander Shishkin [Thu, 19 Jan 2017 16:43:29 +0000 (18:43 +0200)]
perf/core: Don't re-schedule CPU flexible events needlessly

In the sched-in path, we first remove a CPU's flexible events in order to
give priority to the task's pinned events. However, this step can be safely
skipped if the task doesn't have its own pinned events.

This patch implements this skipping.

Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170119164330.22887-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Remove perf_cpu_context::unique_pmu
David Carrillo-Cisneros [Wed, 18 Jan 2017 19:24:54 +0000 (11:24 -0800)]
perf/core: Remove perf_cpu_context::unique_pmu

cpuctx->unique_pmu was originally introduced as a way to identify cpuctxs
with shared pmus in order to avoid visiting the same cpuctx more than once
in a for_each_pmu loop.

cpuctx->unique_pmu == cpuctx->pmu in non-software task contexts since they
have only one pmu per cpuctx. Since perf_pmu_sched_task() is only called in
hw contexts, this patch replaces cpuctx->unique_pmu by cpuctx->pmu in it.

The change above, together with the previous patch in this series, removed
the remaining uses of cpuctx->unique_pmu, so we remove it altogether.

Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170118192454.58008-3-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Make cgroup switch visit only cpuctxs with cgroup events
David Carrillo-Cisneros [Wed, 18 Jan 2017 19:24:53 +0000 (11:24 -0800)]
perf/core: Make cgroup switch visit only cpuctxs with cgroup events

This patch follows from a conversation in CQM/CMT's last series about
speeding up the context switch for cgroup events:

  https://patchwork.kernel.org/patch/9478617/

This is a low-hanging fruit optimization. It replaces the iteration over
the "pmus" list in cgroup switch by an iteration over a new list that
contains only cpuctxs with at least one cgroup event.

This is necessary because the number of PMUs have increased over the years
e.g modern x86 server systems have well above 50 PMUs.

The iteration over the full PMU list is unneccessary and can be costly in
heavy cache contention scenarios.

Below are some instrumentation measurements with 10, 50 and 90 percentiles
of the total cost of context switch before and after this optimization for
a simple array read/write microbenchark.

  Contention
    Level    Nr events      Before (us)            After (us)       Median
  L2    L3     types      (10%, 50%, 90%)       (10%, 50%, 90%     Speedup
  --------------------------------------------------------------------------
  Low   Low       1       (1.72, 2.42, 5.85)    (1.35, 1.64, 5.46)     29%
  High  Low       1       (2.08, 4.56, 19.8)    (1720, 2.20, 13.7)     51%
  High  High      1       (2.86, 10.4, 12.7)    (2.54, 4.32, 12.1)     58%

  Low   Low       2       (1.98, 3.20, 6.89)    (1.68, 2.41, 8.89)     24%
  High  Low       2       (2.48, 5.28, 22.4)    (2150, 3.69, 14.6)     30%
  High  High      2       (3.32, 8.09, 13.9)    (2.80, 5.15, 13.7)     36%

where:

  1 event type  = cycles
  2 event types = cycles,intel_cqm/llc_occupancy/

   Contention L2 Low: workset  <  L2 cache size.
                 High:  "     >>  L2   "     " .
   Contention L3 Low: workset of task on all sockets  <  L3 cache size.
                 High:   "     "   "   "   "    "    >>  L3   "     " .

   Median Speedup is (50%ile Before - 50%ile After) /  50%ile Before

Unsurprisingly, the benefits of this optimization decrease with the number
of cpuctxs with a cgroup events, yet, is never detrimental.

Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170118192454.58008-2-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoMerge branch 'perf/urgent' into perf/core, to pick up fixes
Ingo Molnar [Mon, 30 Jan 2017 10:47:00 +0000 (11:47 +0100)]
Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory
Peter Zijlstra [Thu, 26 Jan 2017 22:15:08 +0000 (23:15 +0100)]
perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory

Andres reported that MMAP2 records for anonymous memory always have
their protection field 0.

Turns out, someone daft put the prot/flags generation code in the file
branch, leaving them unset for anonymous memory.

Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Don Zickus <dzickus@redhat.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: anton@ozlabs.org
Cc: namhyung@kernel.org
Cc: stable@vger.kernel.org # v3.16+
Fixes: f972eb63b100 ("perf: Pass protection and flags bits through mmap2 interface")
Link: http://lkml.kernel.org/r/20170126221508.GF6536@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf/core: Fix use-after-free bug
Peter Zijlstra [Thu, 26 Jan 2017 15:39:55 +0000 (16:39 +0100)]
perf/core: Fix use-after-free bug

Dmitry reported a KASAN use-after-free on event->group_leader.

It turns out there's a hole in perf_remove_from_context() due to
event_function_call() not calling its function when the task
associated with the event is already dead.

In this case the event will have been detached from the task, but the
grouping will have been retained, such that group operations might
still work properly while there are live child events etc.

This does however mean that we can miss a perf_group_detach() call
when the group decomposes, this in turn can then lead to
use-after-free.

Fix it by explicitly doing the group detach if its still required.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v4.5+
Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: 63b6da39bb38 ("perf: Fix perf_event_exit_task() race")
Link: http://lkml.kernel.org/r/20170126153955.GD6515@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agocan: bcm: fix hrtimer/tasklet termination in bcm op removal
Oliver Hartkopp [Wed, 18 Jan 2017 20:30:51 +0000 (21:30 +0100)]
can: bcm: fix hrtimer/tasklet termination in bcm op removal

When removing a bcm tx operation either a hrtimer or a tasklet might run.
As the hrtimer triggers its associated tasklet and vice versa we need to
take care to mutually terminate both handlers.

Reported-by: Michael Josenhans <michael.josenhans@web.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Michael Josenhans <michael.josenhans@web.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
7 years agox86/microcode: Do not access the initrd after it has been freed
Borislav Petkov [Wed, 25 Jan 2017 20:00:48 +0000 (21:00 +0100)]
x86/microcode: Do not access the initrd after it has been freed

When we look for microcode blobs, we first try builtin and if that
doesn't succeed, we fallback to the initrd supplied to the kernel.

However, at some point doing boot, that initrd gets jettisoned and we
shouldn't access it anymore. But we do, as the below KASAN report shows.
That's because find_microcode_in_initrd() doesn't check whether the
initrd is still valid or not.

So do that.

  ==================================================================
  BUG: KASAN: use-after-free in find_cpio_data
  Read of size 1 by task swapper/1/0
  page:ffffea0000db9d40 count:0 mapcount:0 mapping:          (null) index:0x1
  flags: 0x100000000000000()
  raw: 0100000000000000 0000000000000000 0000000000000001 00000000ffffffff
  raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
  page dumped because: kasan: bad access detected
  CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.10.0-rc5-debug-00075-g2dbde22 #3
  Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 1.2.3 12/01/2016
  Call Trace:
   dump_stack
   ? _atomic_dec_and_lock
   ? __dump_page
   kasan_report_error
   ? pointer
   ? find_cpio_data
   __asan_report_load1_noabort
   ? find_cpio_data
   find_cpio_data
   ? vsprintf
   ? dump_stack
   ? get_ucode_user
   ? print_usage_bug
   find_microcode_in_initrd
   __load_ucode_intel
   ? collect_cpu_info_early
   ? debug_check_no_locks_freed
   load_ucode_intel_ap
   ? collect_cpu_info
   ? trace_hardirqs_on
   ? flat_send_IPI_mask_allbutself
   load_ucode_ap
   ? get_builtin_firmware
   ? flush_tlb_func
   ? do_raw_spin_trylock
   ? cpumask_weight
   cpu_init
   ? trace_hardirqs_off
   ? play_dead_common
   ? native_play_dead
   ? hlt_play_dead
   ? syscall_init
   ? arch_cpu_idle_dead
   ? do_idle
   start_secondary
   start_cpu
  Memory state around the buggy address:
   ffff880036e74f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff880036e74f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  >ffff880036e75000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                     ^
   ffff880036e75080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   ffff880036e75100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  ==================================================================

Reported-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170126165833.evjemhbqzaepirxo@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>