[media] siano: use a separate completion for stats
Instead of re-use tune_done also for stats, the better is to use
a different completion.
Also, it was noticed that sometimes, the driver answers with
MSG_SMS_SIGNAL_DETECTED_IND for status request. Fix the code to
also handle those other signal indicators.
Some cleanups at smscoreapi. Most are just CodingStyle.
Also, use kzalloc when allocating a new buffer, as it initializes
the allocated space with zero.
Without smsdvb, the driver actually does nothing, as it
lacks the userspace API.
While I wrote it independently, in order to make a sms2270 board
I have here to work, this patch is functionally identical to this
patch from Doron Cohen:
http://patchwork.linuxtv.org/patch/7894/
As there are some changes that seem to be firmware-dependent,
we need to store the firmware version, as we don't want to break
support for existing cards that use a legacy (and sometimes
custom) firmware.
[media] siano: use USB endpoint descriptors for in/out endp
Instead of using hardcoded descriptors, detect them from the
USB descriptors.
This patch is rebased form Doron Cohen's patch:
http://patchwork.linuxtv.org/patch/7883/
Convert from #define into an enum and add the newer message
macros as found on this patch from Doron Cohen:
http://patchwork.linuxtv.org/patch/7882/
No messages got supressed.
[media] siano: remove a duplicated structure definition
The same GPIO config struct was declared twice at the
driver, with different names and different macros:
struct smscore_config_gpio
struct smscore_config_gpio
Remove the one that uses CamelCase and fix the references to
its attributes/macros.
No functional changes.
Siano changed the namespace on more recent API, and re-used some
of the old names. In order to be able to update the API to support
newer chips, the better is to follow this change.
Lad, Prabhakar [Fri, 8 Mar 2013 09:22:10 +0000 (06:22 -0300)]
[media] davinci: vpbe: fix module build
add a null entry in platform_device_id {}.
This patch fixes following error:
drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is 24 bytes. The last of 3 is:
0x64 0x6d 0x33 0x35 0x35 0x2c 0x76 0x70 0x62 0x65 0x2d 0x76 0x65 0x6e 0x63 0x00 0x00 0x00 0x00 0x00 0x03 0x00 0x00 0x00
FATAL: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is not terminated with a NULL entry!
make[1]: *** [__modpost] Error 1
Reported-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 18:12:01 +0000 (15:12 -0300)]
[media] blackfin: replace V4L2_IN/OUT_CAP_CUSTOM_TIMINGS by DV_TIMINGS
The use of V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is obsolete, use DV_TIMINGS instead.
Note that V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is just a #define for
V4L2_IN/OUT_CAP_DV_TIMINGS.
At some point in the future these CUSTOM_TIMINGS defines might be removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 4 Mar 2013 10:18:38 +0000 (07:18 -0300)]
[media] davinci/dm644x_ccdc: fix compiler warning
drivers/media/platform/davinci/dm644x_ccdc.c: In function ‘validate_ccdc_param’:
drivers/media/platform/davinci/dm644x_ccdc.c:233:32: warning: comparison between ‘enum ccdc_gama_width’ and ‘enum ccdc_data_size’ [-Wenum-compare]
It took a bit of work, see this thread of an earlier attempt to fix this:
https://patchwork.kernel.org/patch/1923091/
I've chosen not to follow the suggestions in that thread since gamma_width is
really a different property from data_size. What you really want is to know if
gamma_width fits inside data_size and for that you need to translate each
enum into a maximum bit number so you can safely compare the two.
So I put in two static inline translation functions instead, keeping the rest
of the code the same (except for fixing the 'gama' typo).
Hans Verkuil [Fri, 15 Feb 2013 18:10:45 +0000 (15:10 -0300)]
[media] davinci: replace V4L2_OUT_CAP_CUSTOM_TIMINGS by V4L2_OUT_CAP_DV_TIMINGS
The use of V4L2_OUT_CAP_CUSTOM_TIMINGS is deprecated, use DV_TIMINGS instead.
Note that V4L2_OUT_CAP_CUSTOM_TIMINGS is just a #define for
V4L2_OUT_CAP_DV_TIMINGS.
At some point in the future these CUSTOM_TIMINGS defines might be removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 18:06:28 +0000 (15:06 -0300)]
[media] davinci: remove VPBE_ENC_DV_PRESET and rename VPBE_ENC_CUSTOM_TIMINGS
Remove VPBE_ENC_DV_PRESET (the DV_PRESET API is no longer supported) and
VPBE_ENC_CUSTOM_TIMINGS is renamed to VPBE_ENC_DV_TIMINGS since the old
"CUSTOM_TIMINGS" name is deprecated in favor of "DV_TIMINGS".
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 17:49:15 +0000 (14:49 -0300)]
[media] tvp7002: remove dv_preset support
Finally remove the dv_preset support from this driver. Note that dv_preset
support was already removed from any bridge drivers that use this i2c
driver, so the dv_preset ops were no longer called and can be removed
safely.
Hans Verkuil [Fri, 15 Feb 2013 17:46:40 +0000 (14:46 -0300)]
[media] tvp7002: use dv_timings structs instead of presets
In the functions tvp7002_mbus_fmt(), tvp7002_log_status and tvp7002_probe()
we should use the dv_timings data structures instead of dv_preset data
structures and functions.
This is the second step towards removing the deprecated preset support of this
driver.
John Smith [Tue, 5 Mar 2013 21:02:43 +0000 (18:02 -0300)]
[media] dvb_demux: Transport stream continuity check fix
This patch avoids incrementing continuity counter
demux->cnt_storage[pid] for TS packets without payload in accordance
with ISO /IEC 13818-1.
[mchehab@redhat.com: unmangle whitespacing and fix CodingStyle.
Also checked ISO/IEC spec: patch is according with it] Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: John Smith <johns90812@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sean Young [Sat, 16 Feb 2013 20:25:44 +0000 (17:25 -0300)]
[media] redrat3: remove memcpys and fix unaligned memory access
In stead of doing a memcpy from #defined offset, declare structs which
describe the incoming and outgoing data accurately.
Tested on first generation RedRat.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
John Sheu [Wed, 6 Feb 2013 23:03:01 +0000 (20:03 -0300)]
[media] v4l2-mem2mem: drop rdy_queue on STREAMOFF
When a v4l2-mem2mem context gets a STREAMOFF call on either its CAPTURE
or OUTPUT queues, we should:
* Drop the corresponding rdy_queue, since a subsequent STREAMON expects
an empty queue.
* Deschedule the context, as it now has at least one empty queue and
cannot run.
Sakari Ailus [Tue, 22 Jan 2013 15:27:56 +0000 (12:27 -0300)]
[media] media: implement 32-on-64 bit compat IOCTL handling
Use the same handlers where the structs are the same. Implement a new
handler for link enumeration since struct media_links_enum is different on
32-bit and 64-bit systems.
I'm pasting the original code and my proposal on the commit message for
make it easy to compare the two versions.
Line 62 of cx25821-audio-upstream.h contains:
char *_defaultAudioName = "/root/audioGOOD.wav";
Original code after replace kmemdup for kstrdup, and after fix return error
code:
if (dev->input_audiofilename) {
dev->_audiofilename = kstrdup(dev->input_audiofilename,
GFP_KERNEL);
if (!dev->_audiofilename) {
err = -ENOMEM;
goto error;
}
/* Default if filename is empty string */
if (strcmp(dev->input_audiofilename, "") == 0)
dev->_audiofilename = "/root/audioGOOD.wav";
} else {
dev->_audiofilename = kstrdup(_defaultAudioName,
GFP_KERNEL);
if (!dev->_audiofilename) {
err = -ENOMEM;
goto error;
}
}
Code proposed in this patch:
if ((dev->input_audiofilename) &&
(strcmp(dev->input_audiofilename, "") != 0))
dev->_audiofilename = kstrdup(dev->input_audiofilename,
GFP_KERNEL);
else
dev->_audiofilename = kstrdup(_defaultAudioName,
GFP_KERNEL);
if (!dev->_audiofilename) {
err = -ENOMEM;
goto error;
}
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[media] dvb_frontend: Simplify the emulation logic
The current logic was broken and too complex; while it works
fine for DVB-S2/DVB-S, it is broken for ISDB-T.
Make the logic simpler, fixes it for ISDB-T and make it clearer.
This function is complex, and has different workflows, one for
DVBv3 calls, and another one for DVBv5 calls. Break it into 3
functions, in order to make easier to understand what each
block does.
No functional changes so far. A few comments got improved.
Frank Schaefer [Sun, 10 Mar 2013 10:25:25 +0000 (07:25 -0300)]
[media] em28xx-i2c: relax error check in em28xx_i2c_recv_bytes()
It turned out that some devices return less bytes then requested via i2c when
ALL of the following 3 conditions are met:
- i2c bus B is used
- there was no attempt to write to the specified slave address before
- no device present at the specified slave address
With the current code, this triggers an -EIO error and prints a message to the
system log.
Because it can happen very often during device probing, it is better to ignore
this error and bail out silently after the follwing i2c transaction success
check with -ENODEV.
[mchehab@redhat.com: a small CodingStyle fix] Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frank Schaefer [Sat, 9 Mar 2013 09:53:01 +0000 (06:53 -0300)]
[media] em28xx: set the timestamp type for video and vbi vb2_queues
The em28xx driver obtains the timestamps using function v4l2_get_timestamp(),
which produces a montonic timestamp.
Fixes the warnings appearing in the system log since commit 6aa69f99
"[media] vb2: Add support for non monotonic timestamps"
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[media] em28xx: add support for registering multiple i2c buses
Register both buses 0 and 1 via I2C API. For now, bus 0 is used
only by eeprom on all known devices. Later patches will be needed
if this changes in the future.
[media] em28xx: Add a separate config dir for secondary bus
Prepare to register a separate bus for the second bus.
For now, just add a new field. A latter patch will add the
bits to make it work.
This patch was generated by this script:
perl -e 'while (<>) { if (s/EM2874_I2C_SECONDARY_BUS_SELECT.*\n//) {
printf "\t\t.def_i2c_bus = 1,\n"; $found = 1; print $_ } else { if ($found) { s/^\s+// }; $found = 0; print $_; } }' \
drivers/media/usb/em28xx/em28xx-cards.c >a && mv a drivers/media/usb/em28xx/em28xx-cards.c
[media] em28xx: Prepare to support 2 different I2C buses
Newer em28xx devices have 2 buses. Change the logic to allow
using both buses.
This patch was generated by this small script:
for i in drivers/media/usb/em28xx/*.c; do
sed 's,->i2c_adap,->i2c_adap[dev->def_i2c_bus],g;s,->i2c_client,->i2c_client[dev->def_i2c_bus],'
done
Of course, em28xx.h needed manual edit.
[media] media/v4l2: VIDEOBUF2_DMA_CONTIG should depend on HAS_DMA
m68k/sun3:
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_mmap’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:204: error: implicit declaration of function ‘dma_mmap_coherent’
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function ‘vb2_dc_get_base_sgt’:
drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function ‘dma_get_sgtable’
Make VIDEOBUF2_DMA_CONTIG and VIDEO_SH_VEU (which selects the former and
doesn't have a platform dependency) depend on HAS_DMA to fix this.
Paul Bolle [Mon, 4 Mar 2013 12:43:20 +0000 (09:43 -0300)]
[media] m920x: let GCC see 'ret' is used initialized
Since commit 7543f344e9b06afe86b55a2620f5c11b38bd5642 ("[media] m920x:
factor out a m920x_write_seq() function") building m920x.o triggers this
GCC warning:
drivers/media/usb/dvb-usb/m920x.c: In function ‘m920x_probe’:
drivers/media/usb/dvb-usb/m920x.c:91:6: warning: ‘ret’ may be used uninitialized in this function [-Wuninitialized]
This warning is caused by m920x_write_seq(), which is apparently inlined
into m920x_probe(). It is clear why GCC thinks 'ret' may be used
uninitialized. But in practice the first seq->address will always be
non-zero when this function is called. That means we can change the
while()-do{} loop into a do{}-while() loop. And that suffices to make
GCC see that 'ret' will not be used uninitialized.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Apparently a copy-paste mistake; the similar sh_vou.h exists, and both
were added to MAINTAINERS by commit b618b69 ([media] MAINTAINERS: add
entries for sh_veu and sh_vou V4L2 drivers).
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Matt Gomboc [Fri, 1 Mar 2013 22:53:30 +0000 (19:53 -0300)]
[media] cx231xx : Add support for OTG102 aka EZGrabber2
Thanks for the response, I have done as you suggested.
Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8.
With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed.
Signed-off-by: Matt Gomboc <gomboc0@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Chen Gang [Thu, 28 Feb 2013 06:08:02 +0000 (03:08 -0300)]
[media] drivers/staging/media/as102: using ccflags-y instead of EXTRA_FLAGS in Makefile
need using ccflags-y instead of EXTRA_CFLAGS
can reference scripts/checkpatch.pl (1755..1766)
when make EXTRA_CFLAGS=-W, the compiling issue will be occured.
Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.
Similarly probe() methods should not be marked __init unless
platform_driver_probe() is used.
Terratec Cinergy S2 USB HD Rev.2 support.
This commit is a corrected cherry-pick of 03228792 which got reverted in b7e38636 because it was rebased incorrectly and introduced compilation
errors.
Signed-off-by: Stephan Hilb <stephan@ecshi.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[media] stv090x: do not unlock unheld mutex in stv090x_sleep()
goto err and goto err_gateoff before mutex_lock(&state->internal->demod_lock)
lead to unlock of unheld mutex in stv090x_sleep().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[media] cx231xx: fix undefined function cx231xx_g_chip_ident()
This patch:
http://git.linuxtv.org/media_tree.git/commit/b86d15440b683f8634c0cb26fc0861a5bc4913ac
is missing a chunk when compared to an older version:
https://patchwork.kernel.org/patch/2063281/
probably because of an unresolved merging conflict.
This causes the following error:
WARNING: "cx231xx_g_chip_ident" [/home/jena/media_build/v4l/cx231xx.ko] undefined!
Hans Verkuil [Fri, 15 Feb 2013 09:07:13 +0000 (06:07 -0300)]
[media] s2255: don't zero struct v4l2_streamparm
All fields after 'type' are already zeroed by the core framework.
Clearing the full struct also clears 'type', which causes a wrong
type value to be returned.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 09:12:58 +0000 (06:12 -0300)]
[media] s2255: fixes in the way standards are handled
Instead of comparing against STD_NTSC and STD_PAL compare against 60 and
50 Hz formats. That's what you really want.
When the standard is changed, make sure the width and height of the format
are also updated to reflect the current standard.
Also replace the deprecated current_norm by the g_std ioctl.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead use v4l2_dbg and v4l2_err. Note that the PDEBUG macro is kept to
make this patch-set less invasive, but it is simply a wrapper around
v4l2_dbg now. Most of the other changes are there to make the dev parameter
for the v4l2_xxx macros available everywhere we do logging.
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / mirror_ubuntu-eoan-kernel.git / log