CONFIG_OF can be set by a randconfig or by a user -- without setting the
early flattree option (OF_EARLY_FLATTREE). This causes build errors.
However, if randconfig or a user sets USE_OF in the Xtensa config,
the right kconfig symbols are set to fix the build.
Fixes these build errors:
../arch/xtensa/kernel/setup.c:67:19: error: ‘__dtb_start’ undeclared here (not in a function); did you mean ‘dtb_start’?
67 | void *dtb_start = __dtb_start;
| ^~~~~~~~~~~
../arch/xtensa/kernel/setup.c: In function 'xtensa_dt_io_area':
../arch/xtensa/kernel/setup.c:201:14: error: implicit declaration of function 'of_flat_dt_is_compatible'; did you mean 'of_machine_is_compatible'? [-Werror=implicit-function-declaration]
201 | if (!of_flat_dt_is_compatible(node, "simple-bus"))
../arch/xtensa/kernel/setup.c:204:18: error: implicit declaration of function 'of_get_flat_dt_prop' [-Werror=implicit-function-declaration]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
../arch/xtensa/kernel/setup.c:204:16: error: assignment to 'const __be32 *' {aka 'const unsigned int *'} from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
204 | ranges = of_get_flat_dt_prop(node, "ranges", &len);
| ^
../arch/xtensa/kernel/setup.c: In function 'early_init_devtree':
../arch/xtensa/kernel/setup.c:228:9: error: implicit declaration of function 'early_init_dt_scan'; did you mean 'early_init_devtree'? [-Werror=implicit-function-declaration]
228 | early_init_dt_scan(params);
../arch/xtensa/kernel/setup.c:229:9: error: implicit declaration of function 'of_scan_flat_dt' [-Werror=implicit-function-declaration]
229 | of_scan_flat_dt(xtensa_dt_io_area, NULL);
xtensa-elf-ld: arch/xtensa/mm/mmu.o:(.text+0x0): undefined reference to `xtensa_kio_paddr'
Fixes: da844a81779e ("xtensa: add device trees support") Fixes: 6cb971114f63 ("xtensa: remap io area defined in device tree") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The MIC2025 switch input signal nEN is active low, describe it as such
in the DT. The previous change to this regulator polarity was incorrectly
influenced by broken quirks in gpiolib-of.c, which is now long fixed. So
fix this regulator polarity setting here once and for all.
Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The panel already contains pinctrl-0 phandle, but it is missing
the default pinctrl-names property, so the pin configuration is
ignored. Fill in the missing pinctrl-names property, so the pin
configuration is applied.
Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
The 28NM DSI PLL driver for msm8960 calculates with a 27MHz reference
clock and should hence use PXO, not CXO which runs at 19.2MHz.
Note that none of the DSI PHY/PLL drivers currently use this "ref"
clock; they all rely on (sometimes inexistant) global clock names and
usually function normally without a parent clock. This discrepancy will
be corrected in a future patch, for which this change needs to be in
place first.
Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20210829203027.276143-2-marijn.suijten@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Set qcom_socinfo pointer as data being stored instead of pointer
to soc_device structure. Aligns with future calls to platform_get_data()
which expects qcom_socinfo pointer.
The conditional branch instructions on MIPS use 18-bit signed offsets
allowing for a branch range of 128 KBytes (backward and forward).
However, this limit is not observed by the cBPF JIT compiler, and so
the JIT compiler emits out-of-range branches when translating certain
cBPF programs. A specific example of such a cBPF program is included in
the "BPF_MAXINSNS: exec all MSH" test from lib/test_bpf.c that executes
anomalous machine code containing incorrect branch offsets under JIT.
Furthermore, this issue can be abused to craft undesirable machine
code, where the control flow is hijacked to execute arbitrary Kernel
code.
The following steps can be used to reproduce the issue:
Commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32
architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has
previously only been availailable for MIPS64. It was my understanding at
the time that the BPF test suite was passing & JITing a comparable
number of tests to our cBPF JIT [1], but it turns out that was not the
case.
The eBPF JIT has a number of problems on MIPS32:
- Most notably various code paths still result in emission of MIPS64
instructions which will cause reserved instruction exceptions & kernel
panics when run on MIPS32 CPUs.
- The eBPF JIT doesn't account for differences between the O32 ABI used
by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably
arguments beyond the first 4 are passed on the stack in O32, and this
is entirely unhandled when JITing a BPF_CALL instruction. Stack space
must be reserved for arguments even if they all fit in registers, and
the callee is free to assume that stack space has been reserved for
its use - with the eBPF JIT this is not the case, so calling any
function can result in clobbering values on the stack & unpredictable
behaviour. Function arguments in eBPF are always 64-bit values which
is also entirely unhandled - the JIT still uses a single (32-bit)
register per argument. As a result all function arguments are always
passed incorrectly when JITing a BPF_CALL instruction, leading to
kernel crashes or strange behavior.
- The JIT attempts to bail our on use of ALU64 instructions or 64-bit
memory access instructions. The code doing this at the start of
build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW,
when it should really be checking BPF_SIZE() & only doing so when
BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false
positives that cause more bailouts than intended, and that in turns
hides some of the problems described above.
- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF
instructions that the MIPS32 eBPF JIT bails out on, leading to most
cBPF programs not being JITed at all.
Until these problems are resolved, revert the removal of the cBPF JIT
performed by commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for
MIPS32 architecture."). Together with commit f8fffebdea75 ("MIPS: BPF:
Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to
the same state it was prior to the introduction of the broken eBPF JIT
support.
Also resolves these kernel warnings for APQ8064:
adreno 4300000.adreno-3xx: Using legacy qcom,chipid binding!
adreno 4300000.adreno-3xx: Use compatible qcom,adreno-320.2 instead.
Tested on Nexus 7 2013, no functional changes.
Cc: <stable@vger.kernel.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210818065317.19822-1-david@ixit.cz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
RFC3530 notes that the 'dircount' field may be zero, in which case the
recommendation is to ignore it, and only enforce the 'maxcount' field.
In RFC5661, this recommendation to ignore a zero valued field becomes a
requirement.
Fixes: aee377644146 ("nfsd4: fix rd_dircount enforcement") Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
init_nfsd() should not unregister pernet subsys if the register fails
but should instead unwind from the last successful operation which is
register_filesystem().
Unregistering a failed register_pernet_subsys() call can result in
a kernel GPF as revealed by programmatically injecting an error in
register_pernet_subsys().
Verified the fix handled failure gracefully with no lingering nfsd
entry in /proc/filesystems. This change was introduced by the commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first"),
the original error handling logic was correct.
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") Cc: stable@vger.kernel.org Signed-off-by: Patrick Ho <Patrick.Ho@netapp.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The memory at the end of the controller only accepts 32bit read/write
accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit
(which will be split into two 32bit access) and 8bit leading to incomplete
copies to/from this memory when the buffer is not multiple of 8bytes.
Add a local copy using writel/readl accesses to make sure we use the right
memory access width.
The switch to memcpy_to/fromio was done because of 285133040e6c
("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy
worked before since it mainly used 32bit memory acceses.
Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
xen_pfn_t is the same size as int only on 32-bit builds (and not even
on Arm32). Hence pfns[] can't be used directly to read individual error
values returned from xen_remap_domain_mfn_array(); every other error
indicator would be skipped/ignored on 64-bit.
Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/aa6d6a67-6889-338a-a910-51e889f792d5@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in
SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state
which is not satisfied with the Type-C spec.
Per Type-C spec:
DRP port should move to Unattached.SNK instead of Unattached.SRC if sink
removed.
Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging")
cc: <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20210928111639.3854174-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.
Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.
Fix this by holding the read lock also when inserting characters from
the bulk endpoint.
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls") Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210929090937.7410-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for
USB_LED_TRIG. This config symbol has bool type and enables extra code
in usb_common itself, not a separate driver. Enabling it should not
force usb_common to be built-in!
Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency") Cc: stable <stable@vger.kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Link: https://lore.kernel.org/r/20210921143442.340087-1-carnil@debian.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Many users are reporting that the Samsung 860 and 870 SSD are having
various issues when combined with AMD/ATI (vendor ID 0x1002) SATA
controllers and only completely disabling NCQ helps to avoid these
issues.
Always disabling NCQ for Samsung 860/870 SSDs regardless of the host
SATA adapter vendor will cause I/O performance degradation with well
behaved adapters. To limit the performance impact to ATI adapters,
introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ
only for these adapters.
Also, two libata.force parameters (noncqati and ncqati) are introduced
to disable and enable the NCQ for the system which equipped with ATI
SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ
function to be enabled or disabled according to the demand.
After verifying the chipset from the user reports, the issue appears
on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on
recent AMD SATA adapters. The vendor ID of ATI should be 0x1002.
Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to
ATA_HORKAGE_NO_NCQ_ON_ATI.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Cc: Krzysztof Olędzki <ole@ans.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
silence nfscache allocation warnings with kvzalloc
Currently nfsd_reply_cache_init attempts hash table allocation through
kmalloc, and manually falls back to vzalloc if that fails. This makes
the code a little larger than needed, and creates a significant amount
of serial console spam if you have enough systems.
Switching to kvzalloc gets rid of the allocation warnings, and makes
the code a little cleaner too as a side effect.
Freeing of nn->drc_hashtbl is already done using kvfree currently.
Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Cc: Krzysztof Olędzki <ole@ans.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).
Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.
This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.
Signed-off-by: Anand K Mistry <amistry@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Intel PMU MSRs is in msrs_to_save_all[], so add AMD PMU MSRs to have a
consistent behavior between Intel and AMD when using KVM_GET_MSRS,
KVM_SET_MSRS or KVM_GET_MSR_INDEX_LIST.
We have to add legacy and new MSRs to handle guests running without
X86_FEATURE_PERFCTR_CORE.
Signed-off-by: Fares Mehanna <faresx@amazon.de>
Message-Id: <20210915133951.22389-1-faresx@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
grow_halt_poll_ns() ignores values between 0 and
halt_poll_ns_grow_start (10000 by default). However,
when we shrink halt_poll_ns we may fall way below
halt_poll_ns_grow_start and endup with halt_poll_ns
values that don't make a lot of sense: like 1 or 9,
or 19.
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Setting SCSI logging level with error=3, we saw some errors from enclosues:
[108017.360833] ses 0:0:9:0: tag#641 Done: NEEDS_RETRY Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=0s
[108017.360838] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427778] ses 0:0:9:0: Power-on or device reset occurred
[108017.427784] ses 0:0:9:0: tag#641 Done: SUCCESS Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[108017.427788] ses 0:0:9:0: tag#641 CDB: Receive Diagnostic 1c 01 01 00 20 00
[108017.427791] ses 0:0:9:0: tag#641 Sense Key : Unit Attention [current]
[108017.427793] ses 0:0:9:0: tag#641 Add. Sense: Bus device reset function occurred
[108017.427801] ses 0:0:9:0: Failed to get diagnostic page 0x1
[108017.427804] ses 0:0:9:0: Failed to bind enclosure -19
[108017.427895] ses 0:0:10:0: Attached Enclosure device
[108017.427942] ses 0:0:10:0: Attached scsi generic sg18 type 13
Retry if the Send/Receive Diagnostic commands complete with a transient
error status (NOT_READY or UNIT_ATTENTION with ASC 0x29).
Link: https://lore.kernel.org/r/1631849061-10210-2-git-send-email-wenxiong@linux.ibm.com Reviewed-by: Brian King <brking@linux.ibm.com> Reviewed-by: James Bottomley <jejb@linux.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix get_warnings_count() to check fscanf() return value to get rid
of the following warning:
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
85 | fscanf(f, "%d", &warnings);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
LKP/0Day reported some building errors about kvm, and errors message
are not always same:
- lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared
(first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’?
- lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use
in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j
is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built
first.
CC: Philip Li <philip.li@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.
sudo ./testusb -a
high speed /dev/bus/usb/001/011 0
/dev/bus/usb/001/011 test 0, 0.000015 secs
/dev/bus/usb/001/011 test 1, 0.194208 secs
/dev/bus/usb/001/011 test 2, 0.077289 secs
/dev/bus/usb/001/011 test 3, 0.170604 secs
/dev/bus/usb/001/011 test 4, 0.108335 secs
/dev/bus/usb/001/011 test 5, 2.788076 secs
/dev/bus/usb/001/011 test 6, 2.594610 secs
/dev/bus/usb/001/011 test 7, 2.905459 secs
/dev/bus/usb/001/011 test 8, 2.795193 secs
/dev/bus/usb/001/011 test 9, 8.372651 secs
/dev/bus/usb/001/011 test 10, 6.919731 secs
/dev/bus/usb/001/011 test 11, 16.372687 secs
/dev/bus/usb/001/011 test 12, 16.375233 secs
/dev/bus/usb/001/011 test 13, 2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17, 0.148826 secs
/dev/bus/usb/001/011 test 18, 0.068718 secs
/dev/bus/usb/001/011 test 19, 0.125992 secs
/dev/bus/usb/001/011 test 20, 0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24, 4.133763 secs
/dev/bus/usb/001/011 test 27, 2.140066 secs
/dev/bus/usb/001/011 test 28, 2.120713 secs
/dev/bus/usb/001/011 test 29, 0.507762 secs
Signed-off-by: Faizel K B <faizel.kb@dicortech.com> Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
After a device is initialized via device_initialize() it should be freed
via put_device(). sd_probe() currently gets this wrong, fix it up.
Link: https://lore.kernel.org/r/20210906090112.531442-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix this by using WARN() to print an error message and a stack trace
instead of using ext2_error().
Link: https://lore.kernel.org/r/20210921203233.GA16529@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Guenter reported [1] that the pci_iounmap() changes remain problematic,
with sparc64 allnoconfig and tinyconfig still not building due to the
header file changes and confusion with the arch-specific pci_iounmap()
implementation.
I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of
doing its own thing, since it turns out that the sparc64 version of
pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this
just fixes the build by avoiding the trivial re-definition of the empty
case.
When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.
Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").
So introduce a ->shutdown method in the MDIO device driver structure.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Tim Gardner [Thu, 4 Nov 2021 18:38:01 +0000 (12:38 -0600)]
UBUNTU: SAUCE: aws: Fix backport of RDMA/efa: Expose maximum TX doorbell batch
BugLink: https://bugs.launchpad.net/bugs/1949882
The backport of ("RDMA/efa: Expose maximum TX doorbell batch") was incorrect in
that it missed the addition of a structure variable. Though unused by
the driver, it is a shared structure between the device and the driver,
and must therefore have the correct offsets.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
KVM: x86: Properly reset MMU context at vCPU RESET/INIT
BugLink: https://bugs.launchpad.net/bugs/1948862
Reset the MMU context at vCPU INIT (and RESET for good measure) if CR0.PG
was set prior to INIT. Simply re-initializing the current MMU is not
sufficient as the current root HPA may not be usable in the new context.
E.g. if TDP is disabled and INIT arrives while the vCPU is in long mode,
KVM will fail to switch to the 32-bit pae_root and bomb on the next
VM-Enter due to running with a 64-bit CR3 in 32-bit mode.
This bug was papered over in both VMX and SVM, but still managed to rear
its head in the MMU role on VMX. Because EFER.LMA=1 requires CR0.PG=1,
kvm_calc_shadow_mmu_root_page_role() checks for EFER.LMA without first
checking CR0.PG. VMX's RESET/INIT flow writes CR0 before EFER, and so
an INIT with the vCPU in 64-bit mode will cause the hack-a-fix to
generate the wrong MMU role.
In VMX, the INIT issue is specific to running without unrestricted guest
since unrestricted guest is available if and only if EPT is enabled.
Commit 8668a3c468ed ("KVM: VMX: Reset mmu context when entering real
mode") resolved the issue by forcing a reset when entering emulated real
mode.
In SVM, commit ebae871a509d ("kvm: svm: reset mmu on VCPU reset") forced
a MMU reset on every INIT to workaround the flaw in common x86. Note, at
the time the bug was fixed, the SVM problem was exacerbated by a complete
lack of a CR4 update.
The vendor resets will be reverted in future patches, primarily to aid
bisection in case there are non-INIT flows that rely on the existing VMX
logic.
Because CR0.PG is unconditionally cleared on INIT, and because CR0.WP and
all CR4/EFER paging bits are ignored if CR0.PG=0, simply checking that
CR0.PG was '1' prior to INIT/RESET is sufficient to detect a required MMU
context reset.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(backported from 0aa1837533e5f4be8cc21bbc06314c23ba2c5447) Signed-off-by: Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by: Matthew Ruffell <matthew.ruffell@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1948470
For some cases, aufs calls vfs_getattr() with setting NULL to
path->mnt (via vfsub_update_h_iattr() and vfsub_getattr()).
This commit always sets the correct value to it.
Reported-by: Mauricio Faria de Oliveira <mfo@canonical.com> Originally-patched-by: Mauricio Faria de Oliveira <mfo@canonical.com>
See-also: https://www.mail-archive.com/aufs-users@lists.sourceforge.net/msg05862.html and its thread Signed-off-by: J. R. Okajima <hooanon05g@gmail.com>
(cherry picked from commit 71dfddc730395d2bae4e1ae3c9259635a719cf69 aufs5-linux.git) Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Guillaume Nault [Tue, 19 Oct 2021 14:50:00 +0000 (16:50 +0200)]
net: handle ARPHRD_IP6GRE in dev_is_mac_header_xmit()
BugLink: https://bugs.launchpad.net/bugs/1947164
Similar to commit 3b707c3008ca ("net: dev_is_mac_header_xmit() true for
ARPHRD_RAWIP"), add ARPHRD_IP6GRE to dev_is_mac_header_xmit(), to make
ip6gre compatible with act_mirred and __bpf_redirect().
Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a3fa449ffcf5bcf9c3dddf62c11599cdc79ef54a) Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Bluetooth: hci_ldisc: require CAP_NET_ADMIN to attach N_HCI ldisc
BugLink: https://bugs.launchpad.net/bugs/1949516
Any unprivileged user can attach N_HCI ldisc and send packets coming from a
virtual controller by using PTYs.
Require initial namespace CAP_NET_ADMIN to do that.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
(cherry picked from commit c05731d0c6bd9a625e27ea5c5157ebf1303229e0) Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Gang He [Thu, 14 Oct 2021 13:51:00 +0000 (15:51 +0200)]
ocfs2: fix remounting needed after setfacl command
BugLink: https://bugs.launchpad.net/bugs/1947161
When use setfacl command to change a file's acl, the user cannot get the
latest acl information from the file via getfacl command, until remounting
the file system.
e.g.
setfacl -m u:ivan:rw /ocfs2/ivan
getfacl /ocfs2/ivan
getfacl: Removing leading '/' from absolute path names
file: ocfs2/ivan
owner: root
group: root
user::rw-
group::r--
mask::r--
other::r--
The latest acl record("u:ivan:rw") cannot be returned via getfacl
command until remounting.
Signed-off-by: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Link: http://lkml.kernel.org/r/20200717023751.9922-1-ghe@suse.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 504ec37dfdfbf9c65166c51f7b12126d2a9b18dc) Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
(backported from commit 8bbc9d822421d9ac8ff9ed26a3713c9afc69d6c8)
[cascardo: use PPC_LI instead of EMIT(PPC_RAW_LI)] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
9a24ce5b66f9 ("cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active")
This SAUCE patch is not needed anymore, and even worse, it's adding a
potential NULL pointer dereference in cachefiles_read_backing_file(),
because we do a put_page(newpage) and set newpage = NULL in the main
loop in case of -EEXIST and afterwards we call put_page(newpage) again.
Dropping the SAUCE patch is enough to have the page leaking issue fixed
and prevent the NULL pointer dereference.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Niklas Schnelle [Wed, 3 Nov 2021 13:56:00 +0000 (14:56 +0100)]
s390/pci: fix zpci_zdev_put() on reserve
BugLink: https://bugs.launchpad.net/bugs/1943464
Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcibios_release_device() which was supposed to
prevent the zpci_dev from being freed while the common PCI code has
access to it. It was missed however that the handling of zPCI
availability events assumed that once zpci_zdev_put() was called no
later availability event would still see the device. With the previously
mentioned commit however this assumption no longer holds and we must
make sure that we only drop the initial long-lived reference the zPCI
subsystem holds exactly once.
Do so by introducing a zpci_device_reserved() function that handles when
a device is reserved. Here we make sure the zpci_dev will not be
considered for further events by removing it from the zpci_list.
This also means that the device actually stays in the
ZPCI_FN_STATE_RESERVED state between the time we know it has been
reserved and the final reference going away. We thus need to consider it
a real state instead of just a conceptual state after the removal. The
final cleanup of PCI resources, removal from zbus, and destruction of
the IOMMU stays in zpci_release_device() to make sure holders of the
reference do see valid data until the release.
Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
(backported from commit a46044a92add6a400f4dada7b943b30221f7cc80) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Niklas Schnelle [Wed, 3 Nov 2021 13:56:00 +0000 (14:56 +0100)]
s390/pci: fix use after free of zpci_dev
BugLink: https://bugs.launchpad.net/bugs/1943464
The struct pci_dev uses reference counting but zPCI assumed erroneously
that the last reference would always be the local reference after
calling pci_stop_and_remove_bus_device(). This is usually the case but
not how reference counting works and thus inherently fragile.
In fact one case where this causes a NULL pointer dereference when on an
SRIOV device the function 0 was hot unplugged before another function of
the same multi-function device. In this case the second function's
pdev->sriov->dev reference keeps the struct pci_dev of function 0 alive
even after the unplug. This bug was previously hidden by the fact that
we were leaking the struct pci_dev which in turn means that it always
outlived the struct zpci_dev. This was fixed in commit 0b13525c20fe
("s390/pci: fix leak of PCI device structure") exposing the broken
behavior.
Fix this by accounting for the long living reference a struct pci_dev
has to its underlying struct zpci_dev via the zbus->function[] array and
only release that in pcibios_release_device() ensuring that the struct
pci_dev is not left with a dangling reference. This is a minimal fix in
the future it would probably better to use fine grained reference
counting for struct zpci_dev.
Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus") Cc: stable@vger.kernel.org Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
(backported from commit 2a671f77ee49f3e78997b77fdee139467ff6a598) Signed-off-by: Frank Heimes <frank.heimes@canonical.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Niklas Schnelle [Wed, 3 Nov 2021 13:56:00 +0000 (14:56 +0100)]
s390/pci: fix leak of PCI device structure
BugLink: https://bugs.launchpad.net/bugs/1943464
In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().
Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().
Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.
Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.
Johan Hovold [Fri, 22 Oct 2021 07:22:00 +0000 (09:22 +0200)]
USB: serial: pl2303: fix line-speed handling on newer chips
BugLink: https://bugs.launchpad.net/bugs/1948377
The latest chip family (HXN) apparently does not support setting the
line speed using divisors and instead needs to use the direct encoding
scheme for all rates.
This specifically enables 50, 110, 134, 200 bps and other rates not
supported by the original chip type.
Fixes: ebd09f1cd417 ("USB: serial: pl2303: add support for PL2303HXN") Cc: stable@vger.kernel.org # 5.5 Cc: Charles Yeh <charlesyeh522@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
(cherry picked from commit 979d9cbe75b922ab1695b8ad5576115774f72e62) Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Charles Yeh [Fri, 22 Oct 2021 07:22:00 +0000 (09:22 +0200)]
USB: serial: pl2303: add support for PL2303HXN
BugLink: https://bugs.launchpad.net/bugs/1948377
Prolific has developed a new USB to UART chip: PL2303HXN
PL2303HXN : PL2303GC/PL2303GS/PL2303GT/PL2303GL/PL2303GE/PL2303GB
The Vendor request used by the PL2303HXN (TYPE_HXN) is different from
the existing PL2303 series (TYPE_HX & TYPE_01).
Therefore, different Vendor requests are used to issue related commands.
1. Added a new TYPE_HXN type in pl2303_type_data, and then executes
new Vendor request,new flow control and other related instructions
if TYPE_HXN is recognized.
2. Because the new PL2303HXN only accept the new Vendor request,
the old Vendor request cannot be accepted (the error message
will be returned)
So first determine the TYPE_HX or TYPE_HXN through
PL2303_READ_TYPE_HX_STATUS in pl2303_startup.
2.1 If the return message is "1", then the PL2303 is the existing
TYPE_HX/ TYPE_01 series.
The other settings in pl2303_startup are to continue execution.
2.2 If the return message is "not 1", then the PL2303 is the new
TYPE_HXN series.
The other settings in pl2303_startup are ignored.
(PL2303HXN will directly use the default value in the hardware,
no need to add additional settings through the software)
3. In pl2303_open: Because TYPE_HXN is different from the instruction of reset
down/up stream used by TYPE_HX.
Therefore, we will also execute different instructions here.
4. In pl2303_set_termios: The UART flow control instructions used by
TYPE_HXN/TYPE_HX/TYPE_01 are different.
Therefore, we will also execute different instructions here.
5. In pl2303_vendor_read & pl2303_vendor_write, since TYPE_HXN is different
from the vendor request instruction used by TYPE_HX/TYPE_01,
it will also execute different instructions here.
6. In pl2303_update_reg: TYPE_HXN used different register for flow control.
Therefore, we will also execute different instructions here.
Signed-off-by: Charles Yeh <charlesyeh522@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
(cherry picked from commit ebd09f1cd417fce9c85de3abcabf51eadf907a2a) Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver.
The problem is the driver assumes the device must have an input report but
some malicious devices violate this assumption.
So this patch checks hid_device's input is non empty before it's been used.
1) If we ccp_init_data() fails for &src then we need to free aad.
Use goto e_aad instead of goto e_ctx.
2) The label to free the &final_wa was named incorrectly as "e_tag" but
it should have been "e_final_wa". One error path leaked &final_wa.
3) The &tag was leaked on one error path. In that case, I added a free
before the goto because the resource was local to that block.
Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" <minihanshen@tencent.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: John Allen <john.allen@amd.com> Tested-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
There are two invocation sites of hso_free_net_device. After
refactoring hso_create_net_device, this parameter is useless.
Remove the bailout in the hso_free_net_device and change the invocation
sites of this function.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The current error handling code of hso_create_net_device is
hso_free_net_device, no matter which errors lead to. For example,
WARNING in hso_free_net_device [1].
Fix this by refactoring the error handling code of
hso_create_net_device by handling different errors by different code.
Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The driver tries to reuse code for disconnect in case
of a failed probe.
If resources need to be freed after an error in probe, the
netdev must not be freed because it has never been registered.
Fix it by telling the helper which path we are in.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Cc: <stable@vger.kernel.org> Signed-off-by: sumiyawang <sumiyawang@tencent.com> Reviewed-by: yongduan <yongduan@tencent.com> Link: https://lore.kernel.org/r/1629632949-14749-1-git-send-email-sumiyawang@tencent.com Fixes: 50f44ee7248a ("mm/devm_memremap_pages: fix final page put race") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[tyhicks: Minor contextual change in pmem_attach_disk() due to the
transition to 'struct range' not yet taking place. Preserve the
memcpy() call rather than initializing the range struct. That change
was introduced in v5.10 with commit a4574f63edc6 ("mm/memremap_pages:
convert to 'struct range'")] Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
The PCI code has several paths where the struct pci_host_bridge is freed
directly. This is wrong because it contains a struct device which is
refcounted and should be freed using put_device(). This can result in
use-after-free errors. I think this problem has existed since 2012 with
commit 7b5436635800 ("PCI: add generic device into pci_host_bridge
struct"). It generally hasn't mattered as most host bridge drivers are
still built-in and can't unbind.
The problem is a struct device should never be freed directly once
device_initialize() is called and a ref is held, but that doesn't happen
until pci_register_host_bridge(). There's then a window between allocating
the host bridge and pci_register_host_bridge() where kfree should be used.
This is fragile and requires callers to do the right thing. To fix this, we
need to split device_register() into device_initialize() and device_add()
calls, so that the host bridge struct is always freed by using a
put_device().
devm_pci_alloc_host_bridge() is using devm_kzalloc() to allocate struct
pci_host_bridge which will be freed directly. Instead, we can use a custom
devres action to call put_device().
Link: https://lore.kernel.org/r/20200513223859.11295-2-robh@kernel.org Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
[tyhicks: Minor contextual change in pci_init_host_bridge() due to the
lack of a native_dpc member in the pci_host_bridge struct. It was added
in v5.7 with commit ac1c8e35a326 ("PCI/DPC: Add Error Disconnect
Recover (EDR) support")] Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Commit 14b41a2959fb ("net: stmmac: Delete txtimer in suspend") was the
first attempt to fix a race between mod_timer() and setup_timer()
during stmmac_resume(). However the issue still exists as the commit
only addressed half of the issue.
Same race can still happen as stmmac_resume() re-attaches interface
way too early - even before hardware is fully initialized. Worse,
doing so allows network traffic to restart and stmmac_tx_timer_arm()
being called in the middle of stmmac_resume(), which re-init tx timers
in stmmac_init_coalesce(). timer_list will be corrupted and system
crashes as a result of race between mod_timer() and setup_timer().
Fix this by deferring netif_device_attach() to the end of
stmmac_resume().
Signed-off-by: Leon Yu <leoyu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Since the actual_length calculation is performed unsigned, packets
shorter than 7 bytes (e.g. packets without data or otherwise truncated)
or non-received packets ("zero" bytes) can cause buffer overflow.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214437 Fixes: 42337b9d4d958("HID: add driver for U2F Zero built-in LED and RNG") Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
Cc: stable@kernel.org Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Registration of the ipoctal tty devices is unlikely to fail, but if it
ever does, make sure not to deregister a never registered tty device
(and dereference a NULL pointer) when the driver is later unbound.
The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).
Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.
Fixing the ABI is a separate issue, but this at least plugs the security
hole.
Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") we still leave MAP_FIXED_NOREPLACE in place for
load_elf_interp.
Unfortunately, this will cause kernel to fail to start with:
1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already
Failed to execute /init (error -17)
The reason is that the elf interpreter (ld.so) has overlapping segments.
readelf -l ld-2.31.so
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x000000000002c94c 0x000000000002c94c R E 0x10000
LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0
0x00000000000021e8 0x0000000000002320 RW 0x10000
LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00
0x00000000000011ac 0x0000000000001328 RW 0x10000
The reason for this problem is the same as described in commit ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments").
Not only executable binaries, elf interpreters (e.g. ld.so) can have
overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go
back to MAP_FIXED in load_elf_interp.
Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: <stable@vger.kernel.org> # v4.19 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.
In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.
Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.
Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.
KASAN trace:
[ 352.773640] ==================================================================
[ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987
hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.
The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1
[ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]
Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.
Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.
When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.
Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.
The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.
The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).
The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.
The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.
The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.
It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!
In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).
Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.
Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.
Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.
This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.
Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.
Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
For both local and remote sensors all the supported ICs can report an
"undervoltage lockout" condition which means the conversion wasn't
properly performed due to insufficient power supply voltage and so the
measurement results can't be trusted.
Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize") Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx
that our handling of the hrtimer here is wrong: If the timer fires
late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot)
then it tries to actually rearm the timer at the next deadline,
which might be in the past already:
1 2 3 N N+1
| | | ... | |
^ intended to fire here (1)
^ next deadline here (2)
^ actually fired here
The next time it fires, it's later, but will still try to schedule
for the next deadline (now 3), etc. until it catches up with N,
but that might take a long time, causing stalls etc.
Now, all of this is simulation, so we just have to fix it, but
note that the behaviour is wrong even per spec, since there's no
value then in sending all those beacons unaligned - they should be
aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a
bit (or a lot) late, then just resume at that point.
Therefore, change the code to use hrtimer_forward_now() which will
ensure that the next firing of the timer would be at N+1 (in the
picture), i.e. the next interval point after the current time.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the
end of skb_shinfo(head)->frag_list, and use it to bind other skb in
the end of this function. But when execute ieee80211_amsdu_aggregate()
->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of
skb_shinfo(head)->frag_list will be changed. However, the
ieee80211_amsdu_aggregate() not update frag_tail after call
pskb_expand_head(). That will cause the second skb can't bind to the
head skb appropriately.So we update the address of frag_tail to fix it.
Fan speed minimum can be enforced from sysfs. For example, setting
current fan speed to 20 is used to enforce fan speed to be at 100%
speed, 19 - to be not below 90% speed, etcetera. This feature provides
ability to limit fan speed according to some system wise
considerations, like absence of some replaceable units or high system
ambient temperature.
Request for changing fan minimum speed is configuration request and can
be set only through 'sysfs' write procedure. In this situation value of
argument 'state' is above nominal fan speed maximum.
Return non-zero code in this case to avoid
thermal_cooling_device_stats_update() call, because in this case
statistics update violates thermal statistics table range.
The issues is observed in case kernel is configured with option
CONFIG_THERMAL_STATISTICS.
Here is the trace from KASAN:
[ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444
[ 159.545625] Call Trace:
[ 159.548366] dump_stack+0x92/0xc1
[ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0
[ 159.635869] thermal_zone_device_update+0x345/0x780
[ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0
[ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]
[ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]
[ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core]
[ 160.070233] RIP: 0033:0x7fd995909970
[ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..
[ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970
[ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001
[ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700
[ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013
[ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013
[ 160.143671]
[ 160.145338] Allocated by task 2924:
[ 160.149242] kasan_save_stack+0x19/0x40
[ 160.153541] __kasan_kmalloc+0x7f/0xa0
[ 160.157743] __kmalloc+0x1a2/0x2b0
[ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0
[ 160.167687] __thermal_cooling_device_register+0x1b5/0x500
[ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0
[ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]
[ 160.248140]
[ 160.249807] The buggy address belongs to the object at ffff888116163400
[ 160.249807] which belongs to the cache kmalloc-1k of size 1024
[ 160.263814] The buggy address is located 64 bytes to the right of
[ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800)
[ 160.277536] The buggy address belongs to the page:
[ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160
[ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0
[ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 160.309694] raw: 0200000000010200ffffea00046f7208ffffea0004928208ffff88810004dbc0
[ 160.318367] raw: ffff88811616700000000000000a000600000001ffffffff0000000000000000
[ 160.327033] page dumped because: kasan: bad access detected
[ 160.333270]
[ 160.334937] Memory state around the buggy address:
[ 160.356469] >ffff888116163800: fc ..
Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
ip_vs_conn_tab_bits may be provided by the user through the
conn_tab_bits module parameter. If this value is greater than 31, or
less than 0, the shift operator used to derive tab_size causes undefined
behaviour.
Fix this checking ip_vs_conn_tab_bits value to be in the range specified
in ipvs Kconfig. If not, simply use default value.
Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size") Reported-by: Yi Chen <yiche@redhat.com> Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kelsey Skunberg <kelsey.skunberg@canonical.com>
projects / mirror_ubuntu-focal-kernel.git / log