hw/ppc: Delete unused ppc405cr_init() code

The function ppc405cr_init() has apparently been unused since it was
added in commit 8ecc7913525ecb in 2007.

Remove this dead code, so we don't have to convert it away from using
ppcuic_init().

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210108171212.16500-3-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

hw/ppc/sam460ex: Drop use of ppcuic_init()

Switch the sam460ex board to directly creating and configuring the
UIC, rather than doing it via the old ppcuic_init() helper function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210108171212.16500-2-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Trivial patches 20210118

Fix memory leaks
Use qemu_log_mask(GUEST_ERROR) rather than error_report().

# gpg: Signature made Mon 18 Jan 2021 11:31:10 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request:
  hw/ide/ahci: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
  misc/mos6522: Use timer_free() in the finalize function to avoid memleak
  pl031: Use timer_free() in the finalize function to avoid memleaks
  hw/virtio-pci: Replace error_report() by qemu_log_mask(GUEST_ERROR)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-180121-2' into staging

Testing, gdbstub and semihosting patches:

  - clean-ups to docker images
  - drop duplicate jobs from shippable
  - prettier tag generation (+gtags)
  - generate browsable source tree
  - more Travis->GitLab migrations
  - fix checkpatch to deal with commits
  - gate gdbstub tests on 8.3.1, expand tests
  - support Xfer:auxv:read gdb packet
  - better gdbstub cleanup
  - use GDB's SVE register layout
  - make arm-compat-semihosting common
  - add riscv semihosting support
  - add HEAPINFO, ELAPSED, TICKFREQ, TMPNAM and ISERROR to semihosting

# gpg: Signature made Mon 18 Jan 2021 10:09:11 GMT
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-and-misc-180121-2: (30 commits)
  semihosting: Implement SYS_ISERROR
  semihosting: Implement SYS_TMPNAM
  semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ
  riscv: Add semihosting support for user mode
  riscv: Add semihosting support
  semihosting: Support SYS_HEAPINFO when env->boot_info is not set
  semihosting: Change internal common-semi interfaces to use CPUState *
  semihosting: Change common-semi API to be architecture-independent
  semihosting: Move ARM semihosting code to shared directories
  target/arm: use official org.gnu.gdb.aarch64.sve layout for registers
  gdbstub: ensure we clean-up when terminated
  gdbstub: drop gdbserver_cleanup in favour of gdb_exit
  gdbstub: drop CPUEnv from gdb_exit()
  gdbstub: add support to Xfer:auxv:read: packet
  gdbstub: implement a softmmu based test
  Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"
  configure: gate our use of GDB to 8.3.1 or above
  test/guest-debug: echo QEMU command as well
  scripts/checkpatch.pl: fix git-show invocation to include diffstat
  gitlab: migrate the minimal tools and unit tests from Travis
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/targets/riscv32-linux-user.mak
# default-configs/targets/riscv64-linux-user.mak

hw/ide/ahci: Replace fprintf() by qemu_log_mask(GUEST_ERROR)

Replace fprintf() calls by qemu_log_mask(LOG_GUEST_ERROR).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210112112955.1849212-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

misc/mos6522: Use timer_free() in the finalize function to avoid memleak

When running device-introspect-test, a memory leak occurred in the mos6522_init
function, this patch use timer_free() in the finalize function to fix it.

ASAN shows memory leak stack:

Direct leak of 96 byte(s) in 2 object(s) allocated from:
    #0 0xfffd5fe9e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xfffd5f7b6800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaae50303d0c in timer_new_full qemu/include/qemu/timer.h:523
    #3 0xaaae50303d0c in timer_new qemu/include/qemu/timer.h:544
    #4 0xaaae50303d0c in timer_new_ns qemu/include/qemu/timer.h:562
    #5 0xaaae50303d0c in mos6522_init qemu/hw/misc/mos6522.c:490
    #6 0xaaae50b77d70 in object_init_with_type qemu/qom/object.c:371
    #7 0xaaae50b7ae84 in object_initialize_with_type qemu/qom/object.c:515
    #8 0xaaae50b7b0f8 in object_new_with_type qemu/qom/object.c:729
    #9 0xaaae50bb6d58 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
    #10 0xaaae50d7e1dc in qmp_marshal_device_list_properties qemu/qapi/qapi-commands-qdev.c:59
    #11 0xaaae50dc87a0 in do_qmp_dispatch_bh qemu/qapi/qmp-dispatch.c:110
    #12 0xaaae50d931a0 in aio_bh_call qemu/util/async.c:136

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210112112705.380534-3-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

pl031: Use timer_free() in the finalize function to avoid memleaks

When running device-introspect-test, a memory leak occurred in the pl031_init
function, this patch use timer_free() in the finalize function to fix it.

ASAN shows memory leak stack:

Direct leak of 48 byte(s) in 1 object(s) allocated from:
    #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
    #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
    #2 0xaaabf5621cfc in timer_new_full qemu/include/qemu/timer.h:523
    #3 0xaaabf5621cfc in timer_new qemu/include/qemu/timer.h:544
    #4 0xaaabf5621cfc in timer_new_ns qemu/include/qemu/timer.h:562
    #5 0xaaabf5621cfc in pl031_init qemu/hw/rtc/pl031.c:194
    #6 0xaaabf6339f6c in object_initialize_with_type qemu/qom/object.c:515
    #7 0xaaabf633a1e0 in object_new_with_type qemu/qom/object.c:729
    #8 0xaaabf6375e40 in qmp_device_list_properties qemu/qom/qom-qmp-cmds.c:153
    #9 0xaaabf5a95540 in qdev_device_help qemu/softmmu/qdev-monitor.c:283
    #10 0xaaabf5a96940 in qmp_device_add qemu/softmmu/qdev-monitor.c:801
    #11 0xaaabf5a96e70 in hmp_device_add qemu/softmmu/qdev-monitor.c:916
    #12 0xaaabf5ac0a2c in handle_hmp_command qemu/monitor/hmp.c:1100

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210112112705.380534-2-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

hw/virtio-pci: Replace error_report() by qemu_log_mask(GUEST_ERROR)

Replace I/O write error reported with error_report() by
qemu_log_mask(GUEST_ERROR) which allow filtering.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20201210172834.178052-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210117-3' into staging

First RISC-V PR for 6.0

This PR:
 - Fixes some issues with the m25p80
 - Improves GDB support for RISC-V
 - Fixes some Linux boot issues, specifiaclly 32-bit boot failures
 - Enforces PMP exceptions correctly
 - Fixes some Coverity issues

# gpg: Signature made Sun 17 Jan 2021 21:53:19 GMT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20210117-3:
  riscv: Pass RISCVHartArrayState by pointer
  target/riscv: Remove built-in GDB XML files for CSRs
  target/riscv: Generate the GDB XML file for CSR registers dynamically
  target/riscv: Add CSR name in the CSR function table
  target/riscv: Make csr_ops[CSR_TABLE_SIZE] external
  hw/misc/sifive_u_otp: handling the fails of blk_pread and blk_pwrite
  hw/riscv: sifive_u: Use SIFIVE_U_CPU for mc->default_cpu_type
  target/riscv/pmp: Raise exception if no PMP entry is configured
  RISC-V: Place DTB at 3GB boundary instead of 4GB
  gdb: riscv: Add target description
  hw/block: m25p80: Implement AAI-WP command support for SST flashes
  hw/block: m25p80: Don't write to flash if write is disabled

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

semihosting: Implement SYS_ISERROR

Part of Semihosting for AArch32 and AArch64 Release 2.0

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-10-keithp@keithp.com>
Message-Id: <20210108224256.2321-21-alex.bennee@linaro.org>

semihosting: Implement SYS_TMPNAM

Part of Semihosting for AArch32 and AArch64 Release 2.0

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-9-keithp@keithp.com>
Message-Id: <20210108224256.2321-20-alex.bennee@linaro.org>

semihosting: Implement SYS_ELAPSED and SYS_TICKFREQ

These are part of Semihosting for AArch32 and AArch64 Release 2.0

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-8-keithp@keithp.com>
Message-Id: <20210108224256.2321-19-alex.bennee@linaro.org>

riscv: Add semihosting support for user mode

This could made testing more easier and ARM/AArch64 has supported on
their linux user mode too, so I think it should be reasonable.

Verified GCC testsuite with newlib/semihosting.

Signed-off-by: Kito Cheng <kito.cheng@sifive.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210107170717.2098982-7-keithp@keithp.com>
Message-Id: <20210108224256.2321-18-alex.bennee@linaro.org>

riscv: Add semihosting support

Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in

   https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>

semihosting: Support SYS_HEAPINFO when env->boot_info is not set

env->boot_info is only set in some ARM startup paths, so we cannot
rely on it to support the SYS_HEAPINFO semihosting function. When not
available, fallback to finding a RAM memory region containing the
current stack and use the base of that.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210107170717.2098982-5-keithp@keithp.com>
Message-Id: <20210108224256.2321-16-alex.bennee@linaro.org>

semihosting: Change internal common-semi interfaces to use CPUState *

This makes all of the internal interfaces architecture-independent and
renames the internal functions to use the 'common_semi' prefix instead
of 'arm' or 'arm_semi'.

To do this, some new architecture-specific internal helper functions
were created:

    static inline target_ulong
    common_semi_arg(CPUState *cs, int argno)

Returns the argno'th semihosting argument, where argno can be
either 0 or 1.

    static inline void
    common_semi_set_ret(CPUState *cs, target_ulong ret)

Sets the semihosting return value.

    static inline bool
    common_semi_sys_exit_extended(CPUState *cs, int nr)

This detects whether the specified semihosting call, which
is either TARGET_SYS_EXIT or TARGET_SYS_EXIT_EXTENDED should
be executed using the TARGET_SYS_EXIT_EXTENDED semantics.

    static inline target_ulong
    common_semi_rambase(CPUState *cs)

Returns the base of RAM region used for heap and stack. This
is used to construct plausible values for the SYS_HEAPINFO
call.

In addition, several existing functions have been changed to flag
areas of code which are architecture specific:

    static target_ulong
    common_semi_flen_buf(CPUState *cs)

Returns the current stack pointer minus 64, which is
where a stat structure will be placed on the stack

    #define GET_ARG(n)

This fetches arguments from the semihosting command's argument
block. The address of this is available implicitly through the
local 'args' variable. This is *mostly* architecture
independent, but does depend on the current ABI's notion of
the size of a 'long' parameter, which may need run-time checks
(as it does on AARCH64)

    #define SET_ARG(n, val)

This mirrors GET_ARG and stores data back into the argument
block.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-4-keithp@keithp.com>
Message-Id: <20210108224256.2321-15-alex.bennee@linaro.org>

semihosting: Change common-semi API to be architecture-independent

The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>

semihosting: Move ARM semihosting code to shared directories

This commit renames two files which provide ARM semihosting support so
that they can be shared by other architectures:

 1. target/arm/arm-semi.c     -> hw/semihosting/common-semi.c
 2. linux-user/arm/semihost.c -> linux-user/semihost.c

The build system was modified use a new config variable,
CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM
softmmu and linux-user default configs. The contents of the source
files has not been changed in this patch.

Signed-off-by: Keith Packard <keithp@keithp.com>
[AJB: rename arm-compat-semi, select SEMIHOSTING]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107170717.2098982-2-keithp@keithp.com>
Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>

target/arm: use official org.gnu.gdb.aarch64.sve layout for registers

While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:

  - report org.gnu.gdb.aarch64.sve
  - use gdb nomenclature for names and types
  - minor re-ordering of the types to match reference
  - re-enable ieee_half (as we know gdb supports it now)
  - $vg is now a 64 bit int
  - check $vN and $zN aliasing in test

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>

gdbstub: ensure we clean-up when terminated

If you kill the inferior from GDB we end up leaving our socket lying
around. Fix this by calling gdb_exit() first.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-10-alex.bennee@linaro.org>

gdbstub: drop gdbserver_cleanup in favour of gdb_exit

Despite it's name it didn't actually clean-up so let us document
gdb_exit() better and use that.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-9-alex.bennee@linaro.org>

gdbstub: drop CPUEnv from gdb_exit()

gdb_exit() has never needed anything from env and I doubt we are going
to start now.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>

gdbstub: add support to Xfer:auxv:read: packet

This allows gdb to access the target’s auxiliary vector,
which can be helpful for telling system libraries important details
about the hardware, operating system, and process.

Signed-off-by: Lirong Yuan <yuanzi@google.com>
[AJB: minor tweaks to test case, update MAINTAINERS, restrict to Linux]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200730193932.3654677-1-yuanzi@google.com>
Message-Id: <20210108224256.2321-7-alex.bennee@linaro.org>

gdbstub: implement a softmmu based test

This adds a new tests that allows us to test softmmu only features
including watchpoints. To do achieve this we need to:

  - add _exit: labels to the boot codes
  - write a memory.py test case
  - plumb the test case into the build system
  - tweak the run_test script to:
    - re-direct output when asked
    - use socket based connection for all tests
    - add a small pause before connection

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-6-alex.bennee@linaro.org>

Revert "tests/tcg/multiarch/Makefile.target: Disable run-gdbstub-sha1 test"

We won't attempt to run the test now it's gated on a newer version of
gdb.

This reverts commit a930cadd83b4681a98ce72abf530a791ee2e42a6.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-5-alex.bennee@linaro.org>

configure: gate our use of GDB to 8.3.1 or above

The support of socket based debugging which we need for linux-user
testing is only really stable as of 8.3.1 so lets gate our use of GDB
on having a relatively modern version.

For direct testing you can just point to a locally compiled version of
gdb via configure, e.g.:

  ../../configure --gdb=$HOME/src/binutils-gdb.git/builds/all/install/bin/gdb

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108224256.2321-4-alex.bennee@linaro.org>

test/guest-debug: echo QEMU command as well

This helps with debugging.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210108224256.2321-3-alex.bennee@linaro.org>

scripts/checkpatch.pl: fix git-show invocation to include diffstat

Without this checkpatch keeps complaining about new/changed files even
when MAINTAINERS has been updated. Normal invocations of checkpatch on
patch files rather than commit IDs are unaffected.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-13-alex.bennee@linaro.org>

gitlab: migrate the minimal tools and unit tests from Travis

These tests are good at shaking out missing stubs which otherwise work
if we have built targets. Rather than create a new job just add the
checks to the existing tools-and-docs build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-12-alex.bennee@linaro.org>

Fix build with new yank feature by adding stubs

Fixes: 50186051f42 ("Introduce yank feature")
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
[AJB: tweak MAINTAINERS]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114141918.5201cc9c@gecko.fritz.box>
Message-Id: <20210114165730.31607-11-alex.bennee@linaro.org>

gitlab: move docs and tools build across from Travis

While we are at it we might as well check the tag generation. For
bonus points we run GNU globals htags into the public pages directory
for publishing with the auto generated pages.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210114165730.31607-10-alex.bennee@linaro.org>

docker: expand debian-amd64 image to include tag tools

This is going to be helpful when we want to both test the tool
integration and in the case of global generate a xref doc build.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-9-alex.bennee@linaro.org>

Makefile: wrap cscope in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-8-alex.bennee@linaro.org>

Makefile: wrap etags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-7-alex.bennee@linaro.org>

Makefile: wrap ctags in quiet-command calls

For prettier output.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-6-alex.bennee@linaro.org>

Add newline when generating Dockerfile

Signed-off-by: Alessandro Di Federico <ale@rev.ng>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1610080146-14968-36-git-send-email-tsimpson@quicinc.com>
Message-Id: <20210114165730.31607-5-alex.bennee@linaro.org>

shippable.yml: Remove jobs duplicated on Gitlab-CI

The following jobs are duplicated on Gitlab-CI since commit
6bcb5fc0f7a ("gitlab-ci: Add cross-compiling build tests"):

- IMAGE=debian-armel-cross

  TARGET_LIST=arm-softmmu               -> cross-armel-system
  TARGET_LIST=arm-linux-user            -> cross-armel-user
  TARGET_LIST=armeb-linux-user          -> cross-armel-user

- IMAGE=debian-armhf-cross

  TARGET_LIST=arm-softmmu               -> cross-armhf-system
  TARGET_LIST=arm-linux-user            -> cross-armhf-user
  TARGET_LIST=armeb-linux-user          -> cross-armhf-user

- IMAGE=debian-arm64-cross

  TARGET_LIST=aarch64-softmmu           -> cross-arm64-system
  TARGET_LIST=aarch64-linux-user        -> cross-arm64-user

- IMAGE=debian-s390x-cross

  TARGET_LIST=s390x-softmmu             -> cross-s390x-system
  TARGET_LIST=s390x-linux-user          -> cross-s390x-user

- IMAGE=debian-mips-cross

  TARGET_LIST=mipsel-linux-user         -> cross-mips-user

- IMAGE=debian-mips64el-cross

  TARGET_LIST=mips64el-softmmu          -> cross-mips64el-system
  TARGET_LIST=mips64el-linux-user       -> cross-mips64el-user

- IMAGE=debian-ppc64el-cross

  TARGET_LIST=ppc64-softmmu             -> cross-ppc64el-system
  TARGET_LIST=ppc64-linux-user          -> cross-ppc64el-user
  TARGET_LIST=ppc64abi32-linux-user     -> cross-ppc64el-user

Remove them from Shippable CI.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210108145103.269353-1-f4bug@amsat.org>
Message-Id: <20210114165730.31607-4-alex.bennee@linaro.org>

Makefile: add GNU global tags support

GNU Global is another tags engine which is more like cscope in being
able to support finding both references and definitions. You will be
un-surprised to know it also integrates well with Emacs.

The main benefit of integrating it into find-src-path is it takes less
time to rebuild the database from scratch when you have a lot of build
directories under your source tree.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-3-alex.bennee@linaro.org>

tests/docker: Remove Debian 9 remnant lines

Debian 9 base container has been removed in commits
e3755276d1f and c9d78b06c06. Remove the last remnants.

Fixes: e3755276d1f ("tests/docker: Remove old Debian 9 containers")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210107072933.3828450-1-f4bug@amsat.org>
Message-Id: <20210114165730.31607-2-alex.bennee@linaro.org>

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: fixes, features

Fixes all over the place.
PXB support for ARM.
boot index for vhost-user-fs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 17 Jan 2021 11:44:55 GMT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  acpi: Update _DSM method in expected files
  acpi: Enable pxb unit-test for ARM virt machine
  Kconfig: Compile PXB for ARM_VIRT
  acpi/gpex: Exclude pxb's resources from PCI0
  acpi/gpex: Inform os to keep firmware resource map
  acpi: Add addr offset in build_crs
  acpi: Fix unmatched expected DSDT.pxb file
  acpi: Allow DSDT acpi table changes
  vhost-user-fs: add the "bootindex" property
  pci/shpc: don't push attention button when ejecting powered-off device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

acpi: Update _DSM method in expected files

A new _DSM #5 method is added.

Update expected DSDT files accordingly, and re-enable their testing.

Full diff of changed files disassembly:

tests/data/acpi/microvm/DSDT.pcie.dsl:
@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/microvm/DSDT.pcie, Thu Jan 14 13:39:35 2021
+ * Disassembly of tests/data/acpi/microvm/DSDT.pcie, Thu Jan 14 13:51:13 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00000BCF (3023)
+ *     Length           0x00000BD7 (3031)
  *     Revision         0x02
- *     Checksum         0x29
+ *     Checksum         0x99
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -1302,9 +1302,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)

tests/data/acpi/virt/DSDT.dsl:
@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/virt/DSDT, Thu Jan 14 13:39:35 2021
+ * Disassembly of tests/data/acpi/virt/DSDT, Thu Jan 14 13:51:13 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x0000144C (5196)
+ *     Length           0x00001454 (5204)
  *     Revision         0x02
- *     Checksum         0xF0
+ *     Checksum         0x60
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -1838,9 +1838,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)

tests/data/acpi/virt/DSDT.memhp.dsl:
@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/virt/DSDT.memhp, Thu Jan 14 13:39:35 2021
+ * Disassembly of tests/data/acpi/virt/DSDT.memhp, Thu Jan 14 13:51:13 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x0000199D (6557)
+ *     Length           0x000019A5 (6565)
  *     Revision         0x02
- *     Checksum         0x11
+ *     Checksum         0x90
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -1840,9 +1840,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)

tests/data/acpi/virt/DSDT.numamem.dsl:
@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/virt/DSDT.numamem, Thu Jan 14 13:39:35 2021
+ * Disassembly of tests/data/acpi/virt/DSDT.numamem, Thu Jan 14 13:51:13 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x0000144C (5196)
+ *     Length           0x00001454 (5204)
  *     Revision         0x02
- *     Checksum         0xF0
+ *     Checksum         0x60
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -1838,9 +1838,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)

tests/data/acpi/virt/DSDT.pxb.dsl:
@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/virt/DSDT.pxb, Thu Jan 14 13:39:35 2021
+ * Disassembly of tests/data/acpi/virt/DSDT.pxb, Thu Jan 14 13:51:13 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001DF9 (7673)
+ *     Length           0x00001E09 (7689)
  *     Revision         0x02
- *     Checksum         0x42
+ *     Checksum         0x30
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -1810,9 +1810,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)
@@ -3025,9 +3030,14 @@
                     {
                         Return (Buffer (One)
                         {
-                             0x01                                             // .
+                             0x21                                             // !
                         })
                     }
+
+                    If ((Arg2 == 0x05))
+                    {
+                        Return (Zero)
+                    }
                 }

                 Return (Buffer (One)

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-9-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Enable pxb unit-test for ARM virt machine

No matter whether the pxb is enabled or not, the CONFIG_PXB macro in test
would keep undefined. And since pxb is now enabled for ARM Virt machine
by default, let's enable pxb unit-test by removing the CONFIG_PXB.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-8-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Kconfig: Compile PXB for ARM_VIRT

PXB is now supported on ARM, so let's compile for arm_virt machine.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-7-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi/gpex: Exclude pxb's resources from PCI0

Exclude the resources of extra root bridges from PCI0's _CRS. Otherwise,
the resource windows would overlap in guest, and the IO resource window
would fail to be registered.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-6-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi/gpex: Inform os to keep firmware resource map

There may be some differences in pci resource assignment between guest os
and firmware.

Eg. A Bridge with Bus [d2]
    -+-[0000:d2]---01.0-[d3]----01.0

    where [d2:01.00] is a pcie-pci-bridge with BAR0 (mem, 64-bit, non-pref) [size=256]
          [d3:01.00] is a PCI Device with BAR0 (mem, 64-bit, pref) [size=128K]
                                          BAR4 (mem, 64-bit, pref) [size=64M]

    In EDK2, the Resource Map would be:
        PciBus: Resource Map for Bridge [D2|01|00]
        Type = PMem64; Base = 0x8004000000;     Length = 0x4100000;     Alignment = 0x3FFFFFF
           Base = 0x8004000000; Length = 0x4000000;     Alignment = 0x3FFFFFF;  Owner = PCI [D3|01|00:20]
           Base = 0x8008000000; Length = 0x20000;       Alignment = 0x1FFFF;    Owner = PCI [D3|01|00:10]
        Type =  Mem64; Base = 0x8008100000;     Length = 0x100; Alignment = 0xFFF
    It would use 0x4100000 to calculate the root bus's PMem64 resource window.

    While in Linux, kernel will use 0x1FFFFFF as the alignment to calculate
    the PMem64 size, which would be 0x6000000. So kernel would try to
    allocate 0x6000000 from the PMem64 resource window, but since the window
    size is 0x4100000 as assigned by EDK2, the allocation would fail.

The diffences could result in resource assignment failure.

Using _DSM #5 method to inform guest os not to ignore the PCI configuration
that firmware has done at boot time could handle the differences.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-5-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Add addr offset in build_crs

AML needs Address Translation offset to describe how a bridge translates
addresses accross the bridge when using an address descriptor, and
especially on ARM, the translation offset of pio resource is usually
non zero.

Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus
number into build_crs.

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Fix unmatched expected DSDT.pxb file

Commit fe1127da11 ("unit-test: Add the binary file and clear diff.h") does
not use the up-to-date expected file for pxb for ARM virt.

Fix the expected DSDT.pxb file.

Full diff of changed file disassembly:

@@ -5,13 +5,13 @@
  *
  * Disassembling to symbolic ASL+ operators
  *
- * Disassembly of tests/data/acpi/virt/DSDT.pxb, Thu Jan 14 09:33:09 2021
+ * Disassembly of tests/data/acpi/virt/DSDT.pxb, Thu Jan 14 13:34:47 2021
  *
  * Original Table Header:
  *     Signature        "DSDT"
- *     Length           0x00001E7A (7802)
+ *     Length           0x00001DF9 (7673)
  *     Revision         0x02
- *     Checksum         0x57
+ *     Checksum         0x42
  *     OEM ID           "BOCHS "
  *     OEM Table ID     "BXPCDSDT"
  *     OEM Revision     0x00000001 (1)
@@ -45,32 +45,6 @@
             })
         }

-        Device (FLS0)
-        {
-            Name (_HID, "LNRO0015")  // _HID: Hardware ID
-            Name (_UID, Zero)  // _UID: Unique ID
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                Memory32Fixed (ReadWrite,
-                    0x00000000,         // Address Base
-                    0x04000000,         // Address Length
-                    )
-            })
-        }
-
-        Device (FLS1)
-        {
-            Name (_HID, "LNRO0015")  // _HID: Hardware ID
-            Name (_UID, One)  // _UID: Unique ID
-            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
-            {
-                Memory32Fixed (ReadWrite,
-                    0x04000000,         // Address Base
-                    0x04000000,         // Address Length
-                    )
-            })
-        }
-
         Device (FWCF)
         {
             Name (_HID, "QEMU0002")  // _HID: Hardware ID
@@ -665,9 +639,6 @@
         {
             Name (_HID, "PNP0A08" /* PCI Express Bus */)  // _HID: Hardware ID
             Name (_CID, "PNP0A03" /* PCI Bus */)  // _CID: Compatible ID
-            Name (_ADR, Zero)  // _ADR: Address
-            Name (_CCA, One)  // _CCA: Cache Coherency Attribute
-            Name (_SEG, Zero)  // _SEG: PCI Segment
             Name (_BBN, 0x80)  // _BBN: BIOS Bus Number
             Name (_UID, 0x80)  // _UID: Unique ID
             Name (_STR, Unicode ("pxb Device"))  // _STR: Description String
@@ -1857,7 +1828,7 @@
             Name (_CID, "PNP0A03" /* PCI Bus */)  // _CID: Compatible ID
             Name (_SEG, Zero)  // _SEG: PCI Segment
             Name (_BBN, Zero)  // _BBN: BIOS Bus Number
-            Name (_UID, "PCI0")  // _UID: Unique ID
+            Name (_UID, Zero)  // _UID: Unique ID
             Name (_STR, Unicode ("PCIe 0 Device"))  // _STR: Description String
             Name (_CCA, One)  // _CCA: Cache Coherency Attribute
             Name (_PRT, Package (0x80)  // _PRT: PCI Routing Table
@@ -2983,41 +2954,37 @@
                 Return (0x0000004010000000)
             }

-            Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
+            Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
             {
-                Return (ResourceTemplate ()
-                {
-                    WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
-                        0x0000,             // Granularity
-                        0x0000,             // Range Minimum
-                        0x007F,             // Range Maximum
-                        0x0000,             // Translation Offset
-                        0x0080,             // Length
-                        ,, )
-                    DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
-                        0x00000000,         // Granularity
-                        0x10000000,         // Range Minimum
-                        0x3EFEFFFF,         // Range Maximum
-                        0x00000000,         // Translation Offset
-                        0x2EFF0000,         // Length
-                        ,, , AddressRangeMemory, TypeStatic)
-                    DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
-                        0x00000000,         // Granularity
-                        0x00000000,         // Range Minimum
-                        0x0000FFFF,         // Range Maximum
-                        0x3EFF0000,         // Translation Offset
-                        0x00010000,         // Length
-                        ,, , TypeStatic, DenseTranslation)
-                    QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
-                        0x0000000000000000, // Granularity
-                        0x0000008000000000, // Range Minimum
-                        0x000000FFFFFFFFFF, // Range Maximum
-                        0x0000000000000000, // Translation Offset
-                        0x0000008000000000, // Length
-                        ,, , AddressRangeMemory, TypeStatic)
-                })
-            }
-
+                WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
+                    0x0000,             // Granularity
+                    0x0000,             // Range Minimum
+                    0x007F,             // Range Maximum
+                    0x0000,             // Translation Offset
+                    0x0080,             // Length
+                    ,, )
+                DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+                    0x00000000,         // Granularity
+                    0x10000000,         // Range Minimum
+                    0x3EFEFFFF,         // Range Maximum
+                    0x00000000,         // Translation Offset
+                    0x2EFF0000,         // Length
+                    ,, , AddressRangeMemory, TypeStatic)
+                DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+                    0x00000000,         // Granularity
+                    0x00000000,         // Range Minimum
+                    0x0000FFFF,         // Range Maximum
+                    0x3EFF0000,         // Translation Offset
+                    0x00010000,         // Length
+                    ,, , TypeStatic, DenseTranslation)
+                QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
+                    0x0000000000000000, // Granularity
+                    0x0000008000000000, // Range Minimum
+                    0x000000FFFFFFFFFF, // Range Maximum
+                    0x0000000000000000, // Translation Offset
+                    0x0000008000000000, // Length
+                    ,, , AddressRangeMemory, TypeStatic)
+            })
             Name (SUPP, Zero)
             Name (CTRL, Zero)
             Method (_OSC, 4, NotSerialized)  // _OSC: Operating System Capabilities

Fixes: fe1127da11 ("unit-test: Add the binary file and clear diff.h")
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-3-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

acpi: Allow DSDT acpi table changes

Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-2-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

riscv: Pass RISCVHartArrayState by pointer

We were accidently passing RISCVHartArrayState by value instead of
pointer. The type is 824 bytes long so let's correct that and pass it by
pointer instead.

Fixes: Coverity CID 1438099
Fixes: Coverity CID 1438100
Fixes: Coverity CID 1438101
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Message-id: f3e04424723e0e222769991896cc82308fd23f76.1610751609.git.alistair.francis@wdc.com

target/riscv: Remove built-in GDB XML files for CSRs

Now that we have switched to generate the RISC-V CSR XML dynamically,
remove the built-in hardcoded XML files.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Generate the GDB XML file for CSR registers dynamically

At present QEMU RISC-V uses a hardcoded XML to report the feature
"org.gnu.gdb.riscv.csr" [1]. There are two major issues with the
approach being used currently:

- The XML does not specify the "regnum" field of a CSR entry, hence
  consecutive numbers are used by the remote GDB client to access
  CSRs. In QEMU we have to maintain a map table to convert the GDB
  number to the hardware number which is error prone.
- The XML contains some CSRs that QEMU does not implement at all,
  which causes an "E14" response sent to remote GDB client.

Change to generate the CSR register list dynamically, based on the
availability presented in the CSR function table. This new approach
will reflect a correct list of CSRs that QEMU actually implements.

[1] https://sourceware.org/gdb/current/onlinedocs/gdb/RISC_002dV-Features.html#RISC_002dV-Features

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210116054123.5457-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Add CSR name in the CSR function table

In preparation to generate the CSR register list for GDB stub
dynamically, let's add the CSR name in the CSR function table.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-3-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv: Make csr_ops[CSR_TABLE_SIZE] external

In preparation to generate the CSR register list for GDB stub
dynamically, change csr_ops[] to non-static so that it can be
referenced externally.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1610427124-49887-2-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/misc/sifive_u_otp: handling the fails of blk_pread and blk_pwrite

Fix code coverage issues by checking return value and handling fail case
of blk_pread() and blk_pwrite(). Return default value 0xff if read fails.

Fixes: Coverity CID 1435959
Fixes: Coverity CID 1435960
Fixes: Coverity CID 1435961
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201104092900.21214-1-green.wan@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/riscv: sifive_u: Use SIFIVE_U_CPU for mc->default_cpu_type

SIFIVE_U_CPU is conditionally set to SIFIVE_U34 or SIFIVE_U54, hence
there is no need to use #idef to set the mc->default_cpu_type.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210109143637.29645-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

target/riscv/pmp: Raise exception if no PMP entry is configured

As per the privilege specification, any access from S/U mode should fail
if no pmp region is configured.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201223192553.332508-1-atish.patra@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

RISC-V: Place DTB at 3GB boundary instead of 4GB

Currently, we place the DTB at 2MB from 4GB or end of DRAM which ever is
lesser. However, Linux kernel can address only 1GB of memory for RV32.
Thus, it can not map anything beyond 3GB (assuming 2GB is the starting address).
As a result, it can not process DT and panic if opensbi dynamic firmware
is used. While at it, place the DTB further away to avoid in memory placement
issues in future.

Fix this by placing the DTB at 16MB from 3GB or end of DRAM whichever is lower.

Fixes: 66b1205bc5ab ("RISC-V: Copy the fdt in dram instead of ROM")
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Message-id: 20210107091127.3407870-1-atish.patra@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

gdb: riscv: Add target description

Target description is not currently implemented in RISC-V
architecture. Thus GDB won't set it properly when attached.
The patch implements the target description response.

Signed-off-by: Sylvain Pelissier <sylvain.pelissier@gmail.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210106204141.14027-1-sylvain.pelissier@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/block: m25p80: Implement AAI-WP command support for SST flashes

Auto Address Increment (AAI) Word-Program is a special command of
SST flashes. AAI-WP allows multiple bytes of data to be programmed
without re-issuing the next sequential address location.

Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 1608688825-81519-2-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

hw/block: m25p80: Don't write to flash if write is disabled

When write is disabled, the write to flash should be avoided
in flash_write8().

Fixes: 82a2499011a7 ("m25p80: Initial implementation of SPI flash device")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-id: 1608688825-81519-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>

Merge remote-tracking branch 'remotes/kraxel/tags/audio-20210115-pull-request' into staging

audio: improvements for sdl, pulse, fsound.
audio: cleanups & codestyle fixes.

# gpg: Signature made Fri 15 Jan 2021 13:20:56 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/audio-20210115-pull-request: (30 commits)
  audio: space prohibited between function name and parenthesis'('
  audio: Suspect code indent for conditional statements
  audio: Don't use '%#' in format strings
  audio: Fix lines over 90 characters
  audio: foo* bar" should be "foo *bar".
  audio: Add spaces around operator/delete redundant spaces
  audio: Add braces for statements/fix braces' position
  dsoundaudio: fix log message
  dsoundaudio: enable f32 audio sample format
  dsoundaudio: rename dsound_open()
  dsoundaudio: replace GetForegroundWindow()
  paaudio: send recorded data in smaller chunks
  paaudio: limit minreq to 75% of audio timer_rate
  paaudio: comment bugs in functions qpa_init_*
  paaudio: remove unneeded code
  paaudio: wait until the playback stream is ready
  paaudio: wait for PA_STREAM_READY in qpa_write()
  paaudio: avoid to clip samples multiple times
  audio: remove remaining unused plive code
  sdlaudio: enable (in|out).mixing-engine=off
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210115-pull-request' into staging

ui/gtk: refresh rate fixes.
ui/vnc: add support for desktop resize and power contol.
ui/vnc: misc bugfixes.

# gpg: Signature made Fri 15 Jan 2021 10:24:10 GMT
# gpg:                using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20210115-pull-request:
  vnc: add support for extended desktop resize
  vnc: move initialization to framebuffer_update_request
  vnc: move check into vnc_cursor_define
  vnc: Fix a memleak in vnc_display_connect()
  ui: add support for remote power control to VNC server
  vnc: fix unfinalized tlscreds for VncDisplay
  ui/gtk: update monitor interval on egl displays
  ui/gtk: expose gd_monitor_update_interval
  ui/gtk: limit virtual console max update interval
  ui/gtk: rename variable window to widget
  ui/gtk: don't try to redefine SI prefixes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/gkurz-gitlab/tags/9p-next-2021-01-15' into staging

Fix for CVE-2021-20181

# gpg: Signature made Fri 15 Jan 2021 08:52:19 GMT
# gpg:                using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg:                 aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg:                 aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3  4910 71D4 D5E5 822F 73D6

* remotes/gkurz-gitlab/tags/9p-next-2021-01-15:
  9pfs: Fully restart unreclaim loop (CVE-2021-20181)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/mips-20210114' into staging

MIPS patches queue

- Simplify CPU/ISA definitions
- Various maintenance code movements in translate.c
- Convert part of the MSA ASE instructions to decodetree
- Convert some instructions removed from Release 6 to decodetree
- Remove deprecated 'fulong2e' machine alias

# gpg: Signature made Thu 14 Jan 2021 16:16:29 GMT
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/mips-20210114: (69 commits)
  docs/system: Remove deprecated 'fulong2e' machine alias
  target/mips: Remove vendor specific CPU definitions
  target/mips: Remove CPU_NANOMIPS32 definition
  target/mips: Remove CPU_R5900 definition
  target/mips: Convert Rel6 LL/SC opcodes to decodetree
  target/mips: Convert Rel6 LLD/SCD opcodes to decodetree
  target/mips: Convert Rel6 LDL/LDR/SDL/SDR opcodes to decodetree
  target/mips: Convert Rel6 LWLE/LWRE/SWLE/SWRE opcodes to decodetree
  target/mips: Convert Rel6 LWL/LWR/SWL/SWR opcodes to decodetree
  target/mips: Convert Rel6 CACHE/PREF opcodes to decodetree
  target/mips: Convert Rel6 COP1X opcode to decodetree
  target/mips: Convert Rel6 Special2 opcode to decodetree
  target/mips: Remove now unreachable LSA/DLSA opcodes code
  target/mips: Introduce decodetree helpers for Release6 LSA/DLSA opcodes
  target/mips: Introduce decodetree helpers for MSA LSA/DLSA opcodes
  target/mips: Extract LSA/DLSA translation generators
  target/mips: Use decode_ase_msa() generated from decodetree
  target/mips: Introduce decode tree bindings for MSA ASE
  target/mips: Pass TCGCond argument to MSA gen_check_zero_element()
  target/mips: Extract MSA translation routines
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

audio: space prohibited between function name and parenthesis'('

Delete spaces between function name and open parenthesis'('

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-8-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Suspect code indent for conditional statements

Fix code indent.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-7-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Don't use '%#' in format strings

Use '0x' prefix instead of '%#'

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-6-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Fix lines over 90 characters

Fix the line width of code.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-5-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: foo* bar" should be "foo *bar".

transfer "foo* " to "foo *"

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-4-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Add spaces around operator/delete redundant spaces

Fix problems about spaces:
-operator needs spaces around it, add them.
-somespaces are redundant, remove them.

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-3-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: Add braces for statements/fix braces' position

Fix problems about braces:
-braces are necessary for all arms of if/for/while statements
-else should follow close brace '}'

Signed-off-by: Zhang Han <zhanghan64@huawei.com>
Message-id: 20210115012431.79533-1-zhanghan64@huawei.com
Message-Id: <20210115012431.79533-2-zhanghan64@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dsoundaudio: fix log message

There is a mismatch between message and used argument. Change
the argument from frequency to format.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-23-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dsoundaudio: enable f32 audio sample format

Enable the f32 audio sample format for the DirectSound backend.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-22-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dsoundaudio: rename dsound_open()

Rename dsound_open() to dsound_set_cooperative_level(). The
only task of that function is to set the cooperative level for
DirectSound.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-21-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dsoundaudio: replace GetForegroundWindow()

GetForegroundWindow() doesn't necessarily return the own window
handle. It just returns a handle to the currently active window
and can even return NULL. At the time dsound_open() gets called
the active window is most likely the shell window and not the
QEMU window.

Replace GetForegroundWindow() with GetDesktopWindow() which
always returns a valid window handle, and at the same time
replace the DirectSound buffer flag DSBCAPS_STICKYFOCUS with
DSBCAPS_GLOBALFOCUS where Windows only expects a valid window
handle for DirectSound function SetCooperativeLevel(). The
Microsoft online docs for IDirectSound::SetCooperativeLevel
recommend this in the remarks.

This fixes a bug where you can't hear sound from the guest.

To reproduce start qemu with -machine pcspk-audiodev=audio0
-device intel-hda -device hda-duplex,audiodev=audio0
-audiodev dsound,id=audio0,out.mixing-engine=off
from a shell and start audio playback with the hda device in the
guest. The guest will be silent. To hear guest audio you have to
activate the shell window once.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-20-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: send recorded data in smaller chunks

Tell PulseAudio to send recorded audio data in smaller chunks
than timer_period, so there's a good chance that qemu can read
recorded audio data every time it looks for new data.

PulseAudio tries to send buffer updates at a fragsize / 2 rate.
With fragsize = timer_period / 2 * 3 the update rate is 75% of
timer_period. The lower limit for the recording buffer size
maxlength is fragsize * 2.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-19-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: limit minreq to 75% of audio timer_rate

Currently with the playback buffer attribute minreq = -1 and flag
PA_STREAM_EARLY_REQUESTS PulseAudio uses minreq = tlength / 4.
To improve audio playback with larger PulseAudio server side
buffers, limit minreq to a maximum of 75% of audio timer_rate.
That way there is a good chance qemu receives a stream buffer
size update before it tries to write data to the playback stream.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-18-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: comment bugs in functions qpa_init_*

The audio buffer size in audio/paaudio.c is typically larger
than expected. Just comment the bugs in qpa_init_in() and
qpa_init_out() for now. Fixing these bugs may break glitch free
audio playback with fine tuned user audio settings.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-17-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: remove unneeded code

Commit baea032ec7 "audio/paaudio: fix ignored buffer_length setting"
added code to handle buffer_length defaults. This was unnecessary
because the audio_buffer_* functions in audio/audio.c already handle
this. Remove the unneeded code.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-16-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: wait until the playback stream is ready

Don't call pa_stream_writable_size() in qpa_get_buffer_out()
before the playback stream is ready. This prevents a lot of the
following pulseaudio error messages.

pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state

To reproduce start qemu with
-parallel none -device gus,audiodev=audio0 -audiodev pa,id=audio0

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-15-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: wait for PA_STREAM_READY in qpa_write()

Don't call pa_stream_writable_size() in qpa_write() before the
playback stream is ready. This prevents a lot of the following
pulseaudio error messages.

pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state

To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-14-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

paaudio: avoid to clip samples multiple times

The pulseaudio backend currently converts, clips and copies audio
playback samples in the mixing-engine sample buffer multiple
times.

In qpa_get_buffer_out() the function pa_stream_begin_write()
returns a rather large buffer and this allows audio_pcm_hw_run_out()
in audio/audio.c to copy all samples in the mixing-engine buffer
to the pulse audio buffer. Immediately after copying, qpa_write()
notices with a call to pa_stream_writable_size() that pulse audio
only needs a smaller part of the copied samples and ignores the
rest. This copy and ignore process happens several times for each
audio sample.

To fix this behaviour, call pa_stream_writable_size() in
qpa_get_buffer_out() to limit the number of samples
audio_pcm_hw_run_out() will convert. With this change the
pulseaudio pcm_ops functions put_buffer_out and write are no
longer identical and a separate qpa_put_buffer_out is needed.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-13-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: remove remaining unused plive code

Commit 73ad33ef7b "audio: remove plive" forgot to remove this code.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: enable (in|out).mixing-engine=off

Enable the SDL2 backend options -audiodev sdl,out.mixing-
engine=off,in.mixing-engine=off.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: break generic buffer dependency on mixing-engine

Break the unnecessary dependency of the generic buffer management
code on mixing-engine. This is required for the next patch.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: add recording functions

Add audio recording functions. SDL 2.0.5 or later is required to
use the recording functions. Playback continues to work with
earlier SDL 2.0 versions.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: split pcm_ops function get_buffer_in

Split off pcm_ops function run_buffer_in from get_buffer_in and
call run_buffer_in before get_buffer_in.

The next patch only needs the generic buffer management part
from audio_generic_get_buffer_in().

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: replace legacy functions with modern ones

With the modern audio functions it's possible to add new
features like audio recording.

As a side effect this patch fixes a bug where SDL2 can't be used
on Windows. This bug was reported on the qemu-devel mailing list at

https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg04043.html

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: fill remaining sample buffer with silence

Fill the remaining sample buffer with silence. To fill it with
zeroes is wrong for unsigned samples because this is silence
with a DC bias.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: always clear the sample buffer

Always fill the remaining audio callback buffer with silence.
SDL 2.0 doesn't initialize the audio callback buffer. This was
an incompatible change compared to SDL 1.2. For reference read
the SDL 1.2 to 2.0 migration guide.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: don't start playback in init routine

Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device. This patch
keeps the SDL2 device pause state in sync with hw->enabled.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: add -audiodev sdl,out.buffer-count option

Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.

Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.

The in.buffer-count option will be used with one of the next
patches.

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

audio: fix bit-rotted code

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

sdlaudio: remove leftover SDL1.2 code

Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vnc: add support for extended desktop resize

The extended desktop resize encoding adds support for (a) clients
sending resize requests to the server, and (b) multihead support.

This patch implements (a).  All resize requests are rejected by qemu.
Qemu can't resize the framebuffer on its own, this is in the hands of
the guest, so all qemu can do is forward the request to the guest.
Should the guest actually resize the framebuffer we can notify the vnc
client later with a separate message.

This requires support in the display device.  Works with virtio-gpu.

https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#extendeddesktopsize-pseudo-encoding

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-4-kraxel@redhat.com

vnc: move initialization to framebuffer_update_request

qemu sends various state info like current cursor shape to newly connected
clients in response to a set_encoding message.  This is not correct according
to the rfb spec.  Send that information in response to a full (incremental=0)
framebuffer update request instead.  Also send the resize information
unconditionally, not only in case of an actual server-side change.

This makes the qemu vnc server conform to the spec and allows clients to
request the complete vnc server state without reconnect.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-3-kraxel@redhat.com

vnc: move check into vnc_cursor_define

Move the check whenever a cursor exists into the vnc_cursor_define()
function so callers don't have to do it.

Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-2-kraxel@redhat.com

vnc: Fix a memleak in vnc_display_connect()

Free the 'sioc' when the qio_channel_socket_connect_sync() fails.

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201126065702.35095-1-alex.chen@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

ui: add support for remote power control to VNC server

The "XVP" (Xen VNC Proxy) extension defines a mechanism for a VNC client
to issue power control requests to trigger graceful shutdown, reboot, or
hard reset.

This option is not enabled by default, since we cannot assume that users
with VNC access implicitly have administrator access to the guest OS.

Thus is it enabled with a boolean "power-control" option e.g.

   -vnc :1,power-control=on

While, QEMU can easily support shutdown and reset, there's no easy way
to wire up reboot support at this time. In theory it could be done by
issuing a shutdown, followed by a reset, but there's no convenient
wiring for such a pairing in QEMU. It also isn't possible to have the
VNC server directly talk to QEMU guest agent, since the agent chardev is
typically owned by an external mgmt app.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[ kraxel: rebase to master  ]
[ kraxel: add missing break ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

vnc: fix unfinalized tlscreds for VncDisplay

In vnc_display_open(), if tls-creds is enabled, do object_ref(object
ref 1->2) for tls-creds. While in vnc_display_close(), object_unparent
sets object ref to 1(2->1) and  unparent the object for root.
Problem:
1. the object can not be found from the objects_root, while the object
is not finalized.
2. the qemu_opts of tls-creds(id: creds0) is not deleted, so new tls
object with the same id(creds0) can not be delete & add.

Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210111131911.805-1-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>