Markos Chandras [Thu, 4 Jun 2015 10:56:11 +0000 (11:56 +0100)]
MIPS: BPF: Free up some callee-saved registers
Move the two scratch registers from s0 and s1 to t4 and t5 in order
to free up some callee-saved registers. We will use these callee-saved
registers to store some permanent data on them in a subsequent patch.
Paul Burton [Sun, 24 May 2015 15:31:44 +0000 (16:31 +0100)]
MIPS: Optimise non-EVA kernel user memory accesses
Commits ac1d8590d3ae (MIPS: asm: uaccess: Use EVA instructions
wrappers), 05c6516005c4 (MIPS: asm: uaccess: Add EVA support to
copy_{in, to,from}_user) & e3a9b07a9caf (MIPS: asm: uaccess: Add EVA
support for str*_user operations) added checks to various user memory
access functions & macros in order to determine whether to perform
standard memory accesses or their EVA userspace equivalents. In kernels
built without support for EVA these checks are entirely redundant. Avoid
emitting them & allow the compiler to optimise out the EVA userspace
code in such kernels by checking config_enabled(CONFIG_EVA).
This reduces the size of a malta_defconfig kernel built using GCC 4.9.2
by approximately 33KB (from 5995072 to 5962304 bytes).
Ben Hutchings [Mon, 25 May 2015 19:27:29 +0000 (20:27 +0100)]
MIPS: Octeon: Set OHCI and EHCI MMIO byte order to match CPU
The Octeon OHCI is now supported by the ohci-platform driver, and
USB_OCTEON_OHCI is marked as deprecated. However, it is currently
still necessary to enable it in order to select
USB_OHCI_BIG_ENDIAN_MMIO. Make CPU_CAVIUM_OCTEON select that as well,
so that USB_OCTEON_OHCI is really obsolete.
The old ohci-octeon and ehci-octeon drivers also only enabled big-endian
MMIO in case the CPU was big-endian. Make the selections of
USB_EHCI_BIG_ENDIAN_MMIO and USB_OHCI_BIG_ENDIAN_MMIO conditional, to
match this.
Fixes: 2193dda5eec6 ("USB: host: Remove ehci-octeon and ohci-octeon drivers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Chandrakala Chavva <cchavva@caviumnetworks.com> Cc: Paul Martin <paul.martin@codethink.co.uk>
Patchwork: https://patchwork.linux-mips.org/patch/10178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Jonas Gorski [Sun, 12 Apr 2015 10:24:59 +0000 (12:24 +0200)]
MIPS: Add support for vmlinuz.bin appended dtb
Add support for detecting a vmlinuz.bin appended dtb and overriding
the boot arguments to match the UHI interface.
To ensure _edata / __apendend_dtb points to the actual end of the
binary, align the data section to 16 bytes instead of the address
cursor.
Due to ld.script not going through the preprocessor, we can't check
for MIPS_ZBOOT_APPENDED_DTB being enabled, so always reserve space
for it. It should have no consequences for booting without it enabled
except 1 MiB more ram usage during the uncompressing stage.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: John Crispin <blogic@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hartley <James.Hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/9741/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Jonas Gorski [Sun, 12 Apr 2015 10:24:58 +0000 (12:24 +0200)]
MIPS: Add support for vmlinux.bin appended dtb
Add support for detecting a vmlinux.bin appended dtb and overriding
the boot arguments to match the UHI interface.
Due to the PERCPU section being empty for !SMP, but still modifying
the current address by aligning it to the page size, do not define
it for !SMP builds to allow __appended_dtb to still point to
the actual end of the data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: John Crispin <blogic@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hartley <James.Hartley@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/9739/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rob Herring [Tue, 2 Jun 2015 22:46:42 +0000 (17:46 -0500)]
MIPS: prepare for user enabling of CONFIG_OF
In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled, device_tree_init cannot be resolved. This is
trivially fixed by using CONFIG_USE_OF instead of CONFIG_OF for prom.h.
Joshua Kinard [Tue, 2 Jun 2015 22:21:33 +0000 (18:21 -0400)]
MIPS: R12000: Enable branch prediction global history
The R12000 added a new feature to enhance branch prediction called
"global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM),
Coprocessor 0, Diagnostic Register (22):
"""
If bit 26 is set, branch prediction uses all eight bits of the global
history register. If bit 26 is not set, then bits 25:23 specify a count
of the number of bits of global history to be used. Thus if bits 26:23
are all zero, global history is disabled.
The global history contains a record of the taken/not-taken status of
recently executed branches, and when used is XOR'ed with the PC of a
branch being predicted to produce a hashed value for indexing the BPT.
Some programs with small "working set of conditional branches" benefit
significantly from the use of such hashing, some see slight performance
degradation.
"""
This patch enables global history on R12000 CPUs and up by setting bit
26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits
25:23 are left alone so that all eight bits of the global history
register are available for branch prediction.
Joshua Kinard [Tue, 2 Jun 2015 22:03:31 +0000 (18:03 -0400)]
MIPS: IP27: Update/restructure CPU overrides
Inspired by Maciej's recent patch to update DEC cpu-feature-overrides.h,
I updated IP27's as well to disable features known to not apply to the
IP27 platform or the R10K-series of CPUs.
Before:
text data bss dec hex filename 8616648 463200 472240 9552088 91c0d8 vmlinux
After:
text data bss dec hex filename 8592256 471392 472240 9535888 918190 vmlinux
I believe the increase in the size of the data section is for the same
reasons as in the DEC patch.
Paul Gortmaker [Tue, 2 Jun 2015 20:16:07 +0000 (16:16 -0400)]
mips: make loongsoon serial driver explicitly modular
The file looks as if it is non-modular, but it piggy-backs
off CONFIG_SERIAL_8250 which is tristate. If set to "=m"
we will get this after the init/module header cleanup:
arch/mips/loongson/common/serial.c:76:1: error: data definition has no type or storage class [-Werror]
arch/mips/loongson/common/serial.c:76:1: error: type defaults to 'int' in declaration of 'device_initcall' [-Werror=implicit-int]
arch/mips/loongson/common/serial.c:76:1: error: parameter names (without types) in function declaration [-Werror]
arch/mips/loongson/common/serial.c:58:19: error: 'serial_init' defined but not used [-Werror=unused-function]
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/loongson/common/serial.o] Error 1
Make it clearly modular, and add a module_exit function,
so that we avoid the above breakage.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Sergei Shtylyov [Sun, 31 May 2015 21:40:32 +0000 (00:40 +0300)]
MIPS: Get rid of 'kgdb_early_setup' cruft.
Commit 854700115ecf ([MIPS] kgdb: add arch support for the kernel's kgdb core)
added the 'kgdb_early_setup' flag to avoid calling trap_init() and init_IRQ()
the second time, however the code that called these functions earlier, from
kgdb_arch_init(), had been already removed by that time, so the flag never
served any useful purpose. Remove the related code along with ugly #ifdef'ery
at last.
[ralf@linux-mips.org: Folded in Guenter Roeck's fix.]
Alban Bedel [Sun, 31 May 2015 00:18:26 +0000 (02:18 +0200)]
MIPS: Add basic support for the TL-WR1043ND version 1
Add a DTS for TL-WR1043ND version 1 and allow to have it built in the
kernel to circumvent the broken u-boot found on these boards.
Currently only the UART, LEDs and buttons are supported.
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Alban Bedel [Sat, 30 May 2015 23:52:26 +0000 (01:52 +0200)]
DEVICETREE: Add bindings for the ATH79 DDR controllers
The DDR controller of the ARxxx and AR9xxx families provides an
interface to flush the FIFO between various devices and the DDR.
This is mainly used by the IRQ controller to flush the FIFO before
running the interrupt handler of such devices.
Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hante Meuleman [Thu, 21 May 2015 13:27:23 +0000 (15:27 +0200)]
mips: bcm47xx: allow retrieval of complete nvram contents
Host platforms such as routers supported by OpenWrt can
support NVRAM reading directly from internal NVRAM store.
The brcmfmac for one requires the complete nvram contents
to select what needs to be sent to wireless device.
Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Currently, code of Loongson-2/3 is under loongson directory and code of
Loongson-1 is under loongson1 directory. Besides, there are Kconfig
options such as MACH_LOONGSON and MACH_LOONGSON1. This naming style is
very ugly and confusing. Since Loongson-2/3 are both 64-bit general-
purpose CPU while Loongson-1 is 32-bit SoC, we rename both file names
and Kconfig symbols from loongson/loongson1 to loongson64/loongson32.
[ralf@linux-mips.org: Resolve a number of simple conflicts.]
Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Kelvin Cheung <keguang.zhang@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9790/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Mon, 27 Apr 2015 14:07:19 +0000 (15:07 +0100)]
MIPS: Malta: Select 32bit DMA zone for 64-bit kernels
Enable the 32-bit DMA zone for 64-bit Malta kernels so that devices with
32-bit coherent DMA masks aren't constrained to the low 16MB DMA zone,
which can easily be exhausted when there is lots of static kernel data
due to lock and RCU debugging.
Commit c5b367835cfc ("MIPS: Add support for XPA.") added generation of a
shift by _PAGE_PRESENT_SHIFT in build_pte_present() and
build_pte_writable(), however except for the XPA case this is always
zero making it unnecessary.
Make the shift conditional upon _PAGE_PRESENT_SHIFT being non-zero to
save an instruction in those cases.
Fixes: c5b367835cfc ("MIPS: Add support for XPA.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9889/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Mon, 27 Apr 2015 14:07:17 +0000 (15:07 +0100)]
MIPS: tlbex: Fix broken offsets on r2 without XPA
Commit c5b367835cfc ("MIPS: Add support for XPA.") changed
build_pte_present() and build_pte_writable() to assume a constant offset
of _PAGE_READ and _PAGE_WRITE relative to _PAGE_PRESENT, however this is
no longer true for some MIPS32R2 builds since commit be0c37c985ed
("MIPS: Rearrange PTE bits into fixed positions.") which moved the
_PAGE_READ PTE bit away from the _PAGE_PRESENT bit, with the _PAGE_WRITE
bit falling into its place.
Make use of the _PAGE_READ and _PAGE_WRITE definitions to calculate the
correct mask to apply instead of hard coding 3 (for _PAGE_PRESENT |
_PAGE_READ) or 5 (for _PAGE_PRESENT | _PAGE_WRITE).
Fixes: c5b367835cfc ("MIPS: Add support for XPA.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9888/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Mon, 27 Apr 2015 14:07:16 +0000 (15:07 +0100)]
MIPS: Fix KVM guest fixmap address
KVM guest kernels for trap & emulate run in user mode, with a modified
set of kernel memory segments. However the fixmap address is still in
the normal KSeg3 region at 0xfffe0000 regardless, causing problems when
cache alias handling makes use of them when handling copy on write.
Therefore define FIXADDR_TOP as 0x7ffe0000 in the guest kernel mapped
region when CONFIG_KVM_GUEST is defined.
Alban Bedel [Sun, 19 Apr 2015 12:30:03 +0000 (14:30 +0200)]
MIPS: ath79: Improve the DDR controller interface
The DDR controller need to be used by the IRQ controller to flush
the write buffer of some devices before running the IRQ handler.
It is also used by the PCI controller to setup the PCI memory windows.
The current interface used to access the DDR controller doesn't
provides any useful abstraction and simply rely on a shared global
pointer.
Replace this by a simple API to setup the PCI memory windows and use
the write buffer flush independently of the SoC type. That remove the
need for the shared global pointer, simplify the IRQ handler code.
[ralf@linux-mips.org: Folded in Alban Bedel's follup fix.]
Alban Bedel [Sun, 19 Apr 2015 12:30:02 +0000 (14:30 +0200)]
MIPS: ath79: Correctly name the defines for the PLL_FB register
This register is named PLL_FB and is not a divider but a multiplier.
To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and
ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and
ARxxxx_PLL_FB_MASK.
Paul Gortmaker [Mon, 27 Apr 2015 22:47:59 +0000 (18:47 -0400)]
MIPS: tlbex.c: Remove new instance of __cpuinitdata that crept back in
We removed __cpuinit support (leaving no-op stubs) quite some time ago.
However a new instance was added in commit c5b367835cfc7a8ef53b9670a409ff
("MIPS: Add support for XPA.")
Since we want to clobber the stubs soon, get this removed now.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Gortmaker [Mon, 27 Apr 2015 22:47:57 +0000 (18:47 -0400)]
MIPS: c-r4k: Remove legacy __cpuinit section that crept in
We removed __cpuinit support (leaving no-op stubs) quite some time ago.
However a new instance was added in commit 4caa906ee949b7002cc1558bbe3744
("MIPS: mm: c-r4k: Build EVA {d,i}cache flushing functions")
Since we want to clobber the stubs soon, get this removed now.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9893/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Gortmaker [Mon, 27 Apr 2015 22:47:56 +0000 (18:47 -0400)]
MIPS: BCM77xx: Remove legacy __cpuinit{,data} sections that crept in
We removed __cpuinit support (leaving no-op stubs) quite some time ago.
However a few more crept in as of commit 6ee1d93455384cef8a0426effe85da2
("MIPS: BCM47XX: Detect more then 128 MiB of RAM (HIGHMEM)")
Since we want to clobber the stubs soon, get this removed now.
Paul Gortmaker [Mon, 27 Apr 2015 22:47:55 +0000 (18:47 -0400)]
MIPS: ATH25: Remove legacy __cpuinit section that crept in
We removed __cpuinit support (leaving no-op stubs) quite some time ago.
However this one crept back in as of commit 43cc739fd98b8c517ad45756d869f
("MIPS: ath25: add common parts")
Since we want to clobber the stubs soon, get this removed now.
MIPS: BMIPS: Add support for Broadcom BCM97435SVMB
Add a DTS file and Kconfig entry for the BCM97435SVMB evaluation board
using bcm7435.dtsi as an example.
The current code needs some tweaking to allow us to use the
dual-threaded dual BMIPS5200 CPUs, so for now we limit ourselves to
allowing just a single CPU to be booted.
Since BCM63xx runs on BMIPS3300 which requires the use of a FIXADDR_TOP
to avoid collisions with the SBR, utilize asm/bmips-spaces.h which
defines FIXADDR_TOP for us now.
MIPS: BMIPS: Define BMIPS_FIXADDR_TOP in asm/bmips-spaces.h
The FIXADDR_TOP value used by mach-bmips is in fact required whenever we
run on BMIPS3300 BMIPS CPUs, and is not machine, but CPU-specific, move
this constant to asm/bmips-spaces.h and use it in mach-bmips/spaces.h.
Paul Burton [Sun, 24 May 2015 15:11:44 +0000 (16:11 +0100)]
serial: 8250_ingenic: support for Ingenic SoC UARTs
Introduce a driver suitable for use with the UARTs present in
Ingenic SoCs such as the JZ4740 & JZ4780. These are described as being
ns16550 compatible but aren't quite - they require the setting of an
extra bit in the FCR register to enable the UART module. The serial_out
implementation is the same as that in arch/mips/jz4740/serial.c - which
will shortly be removed.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-serial@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-kernel@vger.kernel.org Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:42 +0000 (16:11 +0100)]
MIPS: JZ4740: only detect RAM size if not specified in DT
Allow a devicetree to specify the memory present in the system rather
than probing it from the memory controller. This both saves the probing
for systems where the amount of memory is fixed, and will simplify the
bringup of later Ingenic SoCs where the memory controller register
layout differs.
Paul Burton [Sun, 24 May 2015 15:11:41 +0000 (16:11 +0100)]
MIPS: JZ4740: remove clock.h
The only thing remaining in arch/mips/jz4740/clock.h is declarations of
the jz4740_clock_{suspend,resume} functions. Move these to
arch/mips/include/asm/mach-jz4740/clock.h for consistency with similar
functions, and remove the redundant arch/mips/jz4740/clock.h header.
Paul Burton [Sun, 24 May 2015 15:11:39 +0000 (16:11 +0100)]
MIPS, clk: move jz4740 clock suspend, resume functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_{suspend,resume} functions there for
such consistency. The arch/mips/jz4740/clock.c file now contains nothing
more of use & so is removed.
Paul Burton [Sun, 24 May 2015 15:11:38 +0000 (16:11 +0100)]
MIPS, clk: move jz4740 UDC auto suspend functions to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move the jz4740_clock_udc_{dis,en}able_auto_suspend functions
there for such consistency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10154/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:37 +0000 (16:11 +0100)]
MIPS,clk: move jz4740_clock_set_wait_mode to jz4740-cgu
The jz4740-cgu driver already has access to the CGU, so it makes sense
to move the few remaining accesses to the CGU from arch/mips/jz4740
there too. Move jz4740_clock_set_wait_mode for such consistency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10153/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:36 +0000 (16:11 +0100)]
MIPS,clk: migrate JZ4740 to common clock framework
Migrate the JZ4740 & the qi_lb60 board to use common clock framework
via the new Ingenic SoC CGU driver. Note that the JZ4740-specific
debugfs code is removed since common clock framework provides its own
debug capabilities.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Co-authored-by: Paul Cercueil <paul@crapouillou.net> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Fabian Frederick <fabf@skynet.be> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:35 +0000 (16:11 +0100)]
clk: ingenic: add driver for Ingenic SoC CGU clocks
This driver supports the CGU clocks for Ingenic SoCs. It is generic
enough to be usable across at least the JZ4740 to the JZ4780, and will
be made use of on such devices in subsequent commits. This patch by
itself only adds the SoC-agnostic infrastructure that forms the bulk of
the CGU driver for the aforementioned further commits to make use of.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Co-authored-by: Paul Cercueil <paul@crapouillou.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mike Turquette <mturquette@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10150/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:34 +0000 (16:11 +0100)]
DEVICETREE: Add Ingenic CGU binding documentation
Document the devicetree binding for Ingenic SoC CGUs, and add headers
defining the clock specifiers for clocks provided by the JZ4740 & JZ4780
CGU blocks.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10152/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:33 +0000 (16:11 +0100)]
MIPS: JZ4740: replace use of jz4740_clock_bdata
Replace uses of the jz4740_clock_bdata struct with calls to clk_get_rate
for the appropriate clock. This is in preparation for migrating the
clocks towards common clock framework & devicetree.
Paul Burton [Sun, 24 May 2015 15:11:32 +0000 (16:11 +0100)]
MIPS: JZ4740: Call jz4740_clock_init earlier
Call jz4740_clock_init before any uses of jz4740_clock_bdata occur. This
is in preparation for replacing uses of that struct with calls to
clk_get_rate, which will allow the clocks to be migrated towards common
clock framework & devicetree.
Paul Burton [Sun, 24 May 2015 15:11:29 +0000 (16:11 +0100)]
MIPS: JZ4740: Avoid JZ4740-specific naming
Rename the functions including jz4740 in their names to be more generic
in preparation for supporting further SoCs, and for moving this
interrupt controller code to drivers/irqchip.
Paul Burton [Sun, 24 May 2015 15:11:28 +0000 (16:11 +0100)]
MIPS: JZ4740: read intc base address from DT
Read the base address of the SoC interrupt controller from the device
tree rather than relying upon the JZ4740_INTC_BASE_ADDR macro, in order
to remove the dependency on the asm/mach-jz4740/base.h header.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10145/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:27 +0000 (16:11 +0100)]
MIPS: JZ4740: define IRQ numbers based on number of intc IRQs
For interrupts numbered after those of the interrupt controller, define
their numbers based upon the number of interrupts provided by the SoC
interrupt controller. This is in preparation for supporting newer
Ingenic SoCs which provide more interrupts.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10143/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:26 +0000 (16:11 +0100)]
MIPS: JZ4740: support >32 interrupts
On newer Ingenic SoCs the interrupt controller supports more than 32
interrupts, which it does by duplicating the registers at intervals
of 0x20 bytes within its address space. Add support for an arbitrary
number of interrupts using multiple generic chips, and provide the
number of chips to register from the interrupt controller probe
function.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10141/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:24 +0000 (16:11 +0100)]
MIPS: JZ4740: drop intc debugfs code
The debugfs code becomes a nuisance when attempting to avoid globals,
since the interrupt controller probe function run too early for it to be
safe to create the debugfs files. Drop it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10139/ Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:23 +0000 (16:11 +0100)]
MIPS: JZ4740: register an irq_domain for the interrupt controller
When probing the interrupt controller, register an IRQ domain such
that the interrupts can be translated by devicetree code & thus used
from devicetree.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10140/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:22 +0000 (16:11 +0100)]
MIPS: JZ4740: parse SoC interrupt controller parent IRQ from DT
Rather than hardcoding the IRQ number used to cascade interrupts from
the SoC interrupt controller to the CPU interrupt controller, read that
IRQ number from the DT describing the system.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:21 +0000 (16:11 +0100)]
MIPS: JZ4740: probe interrupt controller via DT
Declare the JZ4740 interrupt controller for probe via DT using the
standard irqchip_init function, and make use of that function to probe
the controller by adding the appropriate node to the JZ4740 dtsi.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10135/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:19 +0000 (16:11 +0100)]
MIPS: JZ4740: Move arch_init_irq out of arch/mips/jz4740/irq.c
In preparation for moving the JZ4740 interrupt controller driver to
drivers/irqchip, move arch_init_irq into setup.c such that everything
remaining in irq.c is related to said JZ4740 interrupt controller.
Paul Burton [Sun, 24 May 2015 15:11:18 +0000 (16:11 +0100)]
MIPS: JZ4740: use generic plat_irq_dispatch
Make use of the generic plat_irq_dispatch function introduced by commit 85f7cdacbb81 "MIPS: Provide a generic plat_irq_dispatch", in order to
reduce unnecessary code duplication.
Paul Burton [Sun, 24 May 2015 22:37:42 +0000 (23:37 +0100)]
MIPS: JZ4740: probe CPU interrupt controller via DT
Use the generic irqchip_init function to probe irqchip drivers using DT,
and add the appropriate node to the JZ4740 devicetree in place of the
call to mips_cpu_irq_init.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Patchwork: https://patchwork.linux-mips.org/patch/10166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:16 +0000 (16:11 +0100)]
IRQCHIP: irq_cpu: declare irqchip table entry
Allow the MIPS CPU interrupt controller to be probed from DT using the
generic __irqchip_of_table for platforms which use irqchip_init. This
will avoid such platforms needing to duplicate the compatible string &
init function pointer.
[ralf@linux-mips.org: Resolved conflict due the preceeding commit that
moves irq-cpu.c.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Cc: Felix Fietkau <nbd@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10131/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:15 +0000 (16:11 +0100)]
MIPS: JZ4740: require & include DT
Require a DT for JZ4740 based systems, and add a stub one for the
qi_lb60 (Ben NanoNote) board. Devices will be migrated to being probed
via this DT over time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:14 +0000 (16:11 +0100)]
MIPS: ingenic: Add newer vendor IDs
Ingenic have actually varied the vendor/company ID of the XBurst cores
across their range of SoCs, whilst keeping the product ID & revision
constant... Add definitions for vendor IDs known to be used in some of
Ingenic's newer SoCs, and handle them in the same way as the existing
Ingenic vendor ID from the JZ4740.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Co-authored-by: Paul Cercueil <paul@crapouillou.net> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/10128/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Burton [Sun, 24 May 2015 15:11:13 +0000 (16:11 +0100)]
MIPS: JZ4740: introduce CONFIG_MACH_INGENIC
In preparation for supporting Ingenic SoCs other than the JZ4740,
introduce MACH_INGENIC to Kconfig & move MACH_JZ4740 to a separate
entry selected by the board when appropriate. This allows MACH_INGENIC
to be used to enable things generic across Ingenic SoCs.
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Andrew Bresticker <abrestic@chromium.org>
Patchwork: https://patchwork.linux-mips.org/patch/10130/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The data size increase is due to the special alignment requirement of
`init_thread_union' aka `.data..init_task' moving it up to the nearest
page boundary and making the amount of padding at its front rely on how
far within a page text ends.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10197/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: tlb-r3k: Move CP0.Wired register initialisation to `tlb_init'
Move the initialisation of the CP0.Wired register implemented by Toshiba
TX3922 and TX3927 processors from `tx39_cache_init' to `tlb_init' where
it belongs, correcting code structure and making sure initialisation
does not rely on `tx39_cache_init' being called before `tlb_init' to
work correctly.
Make `r3k_have_wired_reg' static as it's no longer externally referred
to; remove a stale declaration too.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10195/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: tlb-r3k: Also invalidate wired TLB entries on boot
Most R3k processor implementations have their 8 first TLB entries fixed
as wired, so we always skip them in TLB invalidation. That however
means any leftover entries present there at boot will stay throughout
the life of the kernel, unless replaced with new ones.
So rename `local_flush_tlb_all' to `local_flush_tlb_from' and make it
accept the TLB entry to start from. Then use 0 initially at bootstrap,
and the first regular entry later on, bypassing any wired entries.
Wrap the latter arrangement into a new `local_flush_tlb_all' entry
point.
There is no need to disable interrupts in the call made from `tlb_init'
because it's made before the interrupt subsystem has been initialised;
this is also true for secondary processors, should we ever support R3k
SMP. So move this piece of code to new `local_flush_tlb_all'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10194/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 19 May 2015 08:50:38 +0000 (09:50 +0100)]
MIPS: dump_tlb: Take XPA into account
XPA extends the physical addresses on MIPS32, including the EntryLo
registers. Update dump_tlb() to concatenate the PFNX field from the high
end of the EntryLo registers (as read by mfhc0).
The width of physical and virtual addresses are also separated to show
only 8 nibbles of virtual but 11 nibbles of physical with XPA.
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10077/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 19 May 2015 08:50:37 +0000 (09:50 +0100)]
MIPS: dump_tlb: Take RI/XI bits into account
The RI/XI bits when present are above the PFN field in the EntryLo
registers, at bits 63,62 when read with dmfc0, and bits 31,30 when read
with mfc0. This makes them appear as part of the physical address, since
the other bits are masked with PAGE_MASK, for example:
The physical addresses have bit 36 set, which corresponds to bit 30 of
EntryLo1, the XI bit.
Explicitly mask off the RI and XI bits from the printed physical
address, and print the RI and XI bits separately if they exist, giving
output more like this:
James Hogan [Tue, 19 May 2015 08:50:36 +0000 (09:50 +0100)]
MIPS: dump_tlb: Take EHINV bit into account
The EHINV bit in EntryHi allows a TLB entry to be properly marked
invalid so that EntryHi doesn't have to be set to a unique value to
avoid machine check exceptions due to multiple matching entries.
Unfortunately dump_tlb() doesn't take this into account so it will print
all the uninteresting invalid TLB entries if the current ASID happens to
be 00. Therefore add a condition to skip entries which are marked
invalid with the EHINV bit.
projects / mirror_ubuntu-bionic-kernel.git / log