Linus Torvalds [Fri, 16 Oct 2009 16:25:11 +0000 (09:25 -0700)]
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
sata_mv: Prevent PIO commands to be defered too long if traffic in progress.
pata_sc1200: Fix crash on boot
libata: fix internal command failure handling
libata: fix PMP initialization
sata_nv: make sure link is brough up online when skipping hardreset
ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2
ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets.
pata_via: extend the rev_max for VT6330
Gwendal Grignou [Mon, 12 Oct 2009 22:44:00 +0000 (15:44 -0700)]
sata_mv: Prevent PIO commands to be defered too long if traffic in progress.
Use excl_link when non NCQ commands are defered, to be sure they are processed
as soon as outstanding commands are completed. It prevents some commands to be
defered indifinitely when using a port multiplier.
Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Fri, 16 Oct 2009 04:00:51 +0000 (13:00 +0900)]
libata: fix internal command failure handling
When an internal command fails, it should be failed directly without
invoking EH. In the original implemetation, this was accomplished by
letting internal command bypass failure handling in ata_qc_complete().
However, later changes added post-successful-completion handling to
that code path and the success path is no longer adequate as internal
command failure path. One of the visible problems is that internal
command failure due to timeout or other freeze conditions would
spuriously trigger WARN_ON_ONCE() in the success path.
This patch updates failure path such that internal command failure
handling is contained there.
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Tejun Heo [Thu, 15 Oct 2009 14:37:32 +0000 (23:37 +0900)]
libata: fix PMP initialization
Commit 842faa6c1a1d6faddf3377948e5cf214812c6c90 fixed error handling
during attach by not committing detected device class to dev->class
while attaching a new device. However, this change missed the PMP
class check in the configuration loop causing a new PMP device to go
through ata_dev_configure() as if it were an ATA or ATAPI device.
As PMP device doesn't have a regular IDENTIFY data, this makes
ata_dev_configure() tries to configure a PMP device using an invalid
data. For the most part, it wasn't too harmful and went unnoticed but
this ends up clearing dev->flags which may have ATA_DFLAG_AN set by
sata_pmp_attach(). This means that SATA_PMP_FEAT_NOTIFY ends up being
disabled on PMPs and on PMPs which honor the flag breaks hotplug
support.
This problem was discovered and reported by Ethan Hsiao.
Tejun Heo [Wed, 14 Oct 2009 02:18:28 +0000 (11:18 +0900)]
sata_nv: make sure link is brough up online when skipping hardreset
prereset doesn't bring link online if hardreset is about to happen and
nv_hardreset() may skip if conditions are not right so softreset may
be entered with non-working link status if the system firmware didn't
bring it up before entering OS code which can happen during resume.
This patch makes nv_hardreset() to bring up the link if it's skipping
reset.
This bug was reported by frodone@gmail.com in the following bug entry.
David Howells [Thu, 15 Oct 2009 09:14:35 +0000 (10:14 +0100)]
KEYS: get_instantiation_keyring() should inc the keyring refcount in all cases
The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically). This is passed in the request_key_auth struct as
the dest_keyring member.
keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation. This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key(). In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.
The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed. The effect may take some time to
show up as the key is destroyed lazily.
To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.
This can be tested by setting /etc/request-key.conf to:
keyctl add user _display aaaaaaaa @u
while keyctl request2 user test:x test:x @u &&
keyctl list @u;
do
keyctl request2 user test:x test:x @u;
sleep 31;
keyctl list @u;
done
which will oops eventually. Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.
Reported-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Alexander Zangerl <az@bond.edu.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 15 Oct 2009 22:15:03 +0000 (15:15 -0700)]
Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pci: Fix MODPOST warning
powerpc/oprofile: Add ppc750 CL as supported by oprofile
powerpc: warning: allocated section `.data_nosave' not in segment
powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
powerpc: Fix hypervisor TLB batching
powerpc/mm: Fix hang accessing top of vmalloc space
powerpc: Fix memory leak in axon_msi.c
powerpc/pmac: Fix issues with sleep on some powerbooks
powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
powerpc/ftrace: show real return addresses in modules
Linus Torvalds [Thu, 15 Oct 2009 22:10:27 +0000 (15:10 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI button: don't try to use a non-existent lid device
ACPI: video: Loosen strictness of video bus detection code
eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
eeepc-laptop: Properly annote eeepc_enable_camera().
ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
fujitsu-laptop: address missed led-class ifdef fixup
ACPI: Kconfig, fix proc aggregator text
ACPI: add AC/DC notifier
Linus Torvalds [Thu, 15 Oct 2009 22:09:55 +0000 (15:09 -0700)]
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
OMAP2xxx clock: set up clockdomain pointer in struct clk
OMAP: Fix race condition with autodeps
omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
omap: Initialization of SDRC params on Zoom2
omap: RX-51: Drop I2C-1 speed to 2200
omap: SDMA: Fixing bug in omap_dma_set_global_params()
omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
Linus Torvalds [Thu, 15 Oct 2009 22:06:37 +0000 (15:06 -0700)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: always pin metadata in discard mode
Btrfs: enable discard support
Btrfs: add -o discard option
Btrfs: properly wait log writers during log sync
Btrfs: fix possible ENOSPC problems with truncate
Btrfs: fix btrfs acl #ifdef checks
Btrfs: streamline tree-log btree block writeout
Btrfs: avoid tree log commit when there are no changes
Btrfs: only write one super copy during fsync
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
sysfs: Allow sysfs_move_dir(..., NULL) again.
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: gadget: Fix EEM driver comments and VID/PID
usb-storage: Workaround devices with bogus sense size
USB: ehci: Fix IST boundary checking interval math.
USB: option: Support for AIRPLUS MCD650 Datacard
USB: whci-hcd: always do an update after processing a halted qTD
USB: whci-hcd: handle early deletion of endpoints
USB: wusb: don't use the stack to read security descriptor
USB: rename Documentation/ABI/.../sysfs-class-usb_host
Linus Torvalds [Thu, 15 Oct 2009 21:59:24 +0000 (14:59 -0700)]
Merge the right tty-fixes branch
* branch 'tty-fixes'
tty: use the new 'flush_delayed_work()' helper to do ldisc flush
workqueue: add 'flush_delayed_work()' to run and wait for delayed work
tty: Make flush_to_ldisc() locking more robust
Randy Dunlap [Thu, 15 Oct 2009 03:38:58 +0000 (20:38 -0700)]
vmxnet: fix 2 build problems
vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.
vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'
drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bhavesh davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.
Paul Walmsley [Wed, 14 Oct 2009 22:40:37 +0000 (16:40 -0600)]
OMAP2xxx clock: set up clockdomain pointer in struct clk
clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function. Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.
Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug. Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.
Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Carlos Aguiar <carlos.aguiar@indt.org.br> Cc: Stefano Panella <Stefano.Panella@csr.com> Cc: Tony Lindgren <tony@atomide.com>
Kalle Jokiniemi [Wed, 14 Oct 2009 22:40:37 +0000 (16:40 -0600)]
OMAP: Fix race condition with autodeps
There is a possible race condition in clockdomain
code handling hw supported idle transitions.
When multiple autodeps dependencies are being added
or removed, a transition of still remaining dependent
powerdomain can result in false readings of the
state counter. This is especially fatal for off mode
state counter, as it could result in a driver not
noticing a context loss.
Fixed by disabling hw supported state transitions
when autodeps are being changed.
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
Linus Torvalds [Wed, 14 Oct 2009 22:36:19 +0000 (15:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
ieee1394: add documentation entry to MAINTAINERS
ieee1394: update URLs in debugging-via-ohci1394.txt
Linus Torvalds [Wed, 14 Oct 2009 22:34:55 +0000 (15:34 -0700)]
Merge branch 'tty-fixes'
* branch 'tty-fixes':
tty: use the new 'flush_delayed_work()' helper to do ldisc flush
workqueue: add 'flush_delayed_work()' to run and wait for delayed work
Make flush_to_ldisc properly handle parallel calls
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
watchdog: Fix rio watchdog probe function
sparc64: Set IRQF_DISABLED on LDC channel IRQs.
sparc64: Fix D-cache flushing on swapin from SW devices.
sparc64: Fix niagara2 perf IRQ bits.
Linus Torvalds [Wed, 14 Oct 2009 22:30:45 +0000 (15:30 -0700)]
Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: Fix a TRACE_IRQS_OFF typo.
sh: Optimize the setup_rt_frame() I-cache flush.
sh: Populate initial secondary CPU info from boot_cpu_data.
sh: Tidy up SMP cpuinfo.
sh: Use boot_cpu_data for FPU tests in sigcontext paths.
sh: ftrace: Fix up syscall tracepoint support.
sh: force dcache flush if dcache_dirty bit set.
sh: update die() output.
Linus Torvalds [Wed, 14 Oct 2009 22:25:35 +0000 (15:25 -0700)]
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
oprofile: warn on freeing event buffer too early
oprofile: fix race condition in event_buffer free
lockdep: Use cpu_clock() for lockstat
Linus Torvalds [Wed, 14 Oct 2009 22:24:32 +0000 (15:24 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/paravirt: Use normal calling sequences for irq enable/disable
x86: fix kernel panic on 32 bits when profiling
x86: Fix Suspend to RAM freeze on Acer Aspire 1511Lmi laptop
x86, vmi: Mark VMI deprecated and schedule it for removal
Neil Brown [Tue, 15 Sep 2009 23:05:51 +0000 (16:05 -0700)]
sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
sysfs_notify_dirent is a simple atomic operation that can be used to
alert user-space that new data can be read from a sysfs attribute.
Unfortunately it cannot currently be called from non-process context
because of its use of spin_lock which is sometimes taken with
interrupts enabled.
So change all lockers of sysfs_open_dirent_lock to disable interrupts,
thus making sysfs_notify_dirent safe to be called from non-process
context (as drivers/md does in md_safemode_timeout).
sysfs_get_open_dirent is (documented as being) only called from
process context, so it uses spin_lock_irq. Other places
use spin_lock_irqsave.
The usage for sysfs_notify_dirent in md_safemode_timeout was
introduced in 2.6.28, so this patch is suitable for that and more
recent kernels.
Reported-by: Joel Andres Granados <jgranado@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cornelia Huck [Tue, 6 Oct 2009 13:33:35 +0000 (15:33 +0200)]
sysfs: Allow sysfs_move_dir(..., NULL) again.
As device_move() and kobject_move() both handle a NULL destination,
sysfs_move_dir() should do this as well (again) and fall back to
sysfs_root in that case.
Linus Torvalds [Wed, 14 Oct 2009 16:20:41 +0000 (09:20 -0700)]
tty: use the new 'flush_delayed_work()' helper to do ldisc flush
This way all flush_to_ldisc work is always done through the workqueues,
and we thus have a single point of serialization. It also means that we
can avoid calling flush_to_ldisc() entirely if there was no delayed work
pending.
[ Side note: using workqueues and keventd as the single way to enter
flush_to_ldisc() still doesn't absolutely guarantee that we can't have
concurrency: keventd is multithreaded and has a thread per CPU, and
while the WORK_STRUCT_PENDING bit guarantees a single work only being
on the pending list once, the work might be both pending and _running_
at the same time. Workqueues are not simple. ]
This was also confirmed to fix bugzilla #14388, even without the earlier
locking fix and cleanup (commit c8e331419: "tty: Make flush_to_ldisc()
locking more robust"). So both commits fix the same bug differently,
and either would have worked on its own. But I'm committing them both
since they are cleanups independent of each other.
net: add support for STMicroelectronics Ethernet controllers.
This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
controllers (Synopsys IP blocks).
Driver documentation:
o http://stlinux.com/drupal/kernel/network/stmmac
Revisions:
o http://stlinux.com/drupal/kernel/network/stmmac-driver-revisions
Performances:
o http://stlinux.com/drupal/benchmarks/networking/stmmac
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 14 Oct 2009 16:16:42 +0000 (09:16 -0700)]
workqueue: add 'flush_delayed_work()' to run and wait for delayed work
It basically turns a delayed work into an immediate work, and then waits
for it to finish, thus allowing you to force (and wait for) an immediate
flush of a delayed work.
We'll want to use this in the tty layer to clean up tty_flush_to_ldisc().
Acked-by: Oleg Nesterov <oleg@redhat.com>
[ Fixed to use 'del_timer_sync()' as noted by Oleg ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 14 Oct 2009 22:10:58 +0000 (15:10 -0700)]
net: ks8851_mll uses mii interfaces
From: Randy Dunlap <randy.dunlap@oracle.com>
ks8851_mll uses mii interfaces so it needs to select MII.
ks8851_mll.c:(.text+0xf95ac): undefined reference to `generic_mii_ioctl'
ks8851_mll.c:(.text+0xf96a0): undefined reference to `mii_ethtool_gset'
ks8851_mll.c:(.text+0xf96fa): undefined reference to `mii_ethtool_sset'
ks8851_mll.c:(.text+0xf9754): undefined reference to `mii_link_ok'
ks8851_mll.c:(.text+0xf97ae): undefined reference to `mii_nway_restart'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Bonesio [Wed, 14 Oct 2009 22:10:19 +0000 (15:10 -0700)]
net/fec_mpc52xx: Fix kernel panic on FEC error
The MDIO bus cannot be accessed at interrupt context, but on an FEC
error, the fec_mpc52xx driver reset function also tries to reset the
PHY. Since the error is detected at IRQ context, and the PHY functions
try to sleep, the kernel ends up panicking.
Resetting the PHY on an FEC error isn't even necessary. This patch
solves the problem by removing the PHY reset entirely.
Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 14 Oct 2009 15:59:49 +0000 (08:59 -0700)]
tty: Make flush_to_ldisc() locking more robust
The locking logic in this function is extremely subtle, and it broke
when we started doing potentially concurrent 'flush_to_ldisc()' calls in
commit e043e42bdb66885b3ac10d27a01ccb9972e2b0a3 ("pty: avoid forcing
'low_latency' tty flag").
The code in flush_to_ldisc() used to set 'tty->buf.head' to NULL, with
the intention that this would then cause any other concurrent calls to
not do anything (locking note: we have to drop the buf.lock over the
call to ->receive_buf that can block, which is why we can have
concurrency here at all in the first place).
It also used to set the TTY_FLUSHING bit, which would then cause any
concurrent 'tty_buffer_flush()' to not free all the tty buffers and
clear 'tty->buf.tail'. And with 'buf.head' being NULL, and 'buf.tail'
being non-NULL, new data would never touch 'buf.head'.
Does that sound a bit too subtle? It was. If another concurrent call to
'flush_to_ldisc()' were to come in, the NULL buf.head would indeed cause
it to not process the buffer list, but it would still clear TTY_FLUSHING
afterwards, making the buffer protection against 'tty_buffer_flush()' no
longer work.
So this clears it all up. We depend purely on TTY_FLUSHING for handling
re-entrancy, and stop playing games with the buffer list entirely. In
fact, the buffer list handling is now robust enough that we could
probably stop doing the whole "protect against 'tty_buffer_flush()'"
thing entirely.
However, Alan also points out that we would probably be better off
simplifying the locking even further, and just take the tty ldisc_mutex
around all the buffer flushing calls. That seems like a good idea, but
in the meantime this is a conceptually minimal fix (with the patch
itself being bigger than required just to clean the code up and make it
readable).
Anton Vorontsov [Wed, 14 Oct 2009 21:54:52 +0000 (14:54 -0700)]
net: Fix OF platform drivers coldplug/hotplug when compiled as modules
Some OF platform drivers are missing module device tables, so they won't
load automatically on boot. This patch fixes the issue by adding proper
MODULE_DEVICE_TABLE() macros to the drivers.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
usb-storage: Workaround devices with bogus sense size
usb-storage: Workaround devices with bogus sense size
Some devices, such as Huawei E169, advertise more than the standard
amount of sense data, causing us to set US_FL_SANE_SENSE, assuming
they support it. However, they subsequently fail the request sense
with that size.
This works around it generically. When a sense request fails due to
a device returning an error, US_FL_SANE_SENSE was set, and that sense
request used a larger sense size, we retry with a smaller size before
giving up.
Based on an original patch by Ben Efros <ben@pc-doctor.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sarah Sharp [Fri, 9 Oct 2009 19:28:41 +0000 (12:28 -0700)]
USB: ehci: Fix IST boundary checking interval math.
When the EHCI driver falls behind in its scheduling, the active stream's
first empty microframe may be in the past with respect to the current
microframe. The code attempts to move the starting microframe ("start") N
number of microframes forward, where N is the interval of endpoint.
However, stream->interval is a copy of the endpoint's bInterval, which is
designated in frames for FS devices, and microframes for HS devices.
Convert stream->interval to microframes before using it to move the
starting microframe forward.
Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Vrabel [Mon, 12 Oct 2009 15:45:15 +0000 (15:45 +0000)]
USB: whci-hcd: handle early deletion of endpoints
If an endpoint is deleted before it's been fully added to the hardware
list, the associated qset will not be fully initialized and an oops will
occur when complete(&qset->remove_complete) is called. This can happen
if a queued URB is cancelled.
Fix this by only removing the qset from the hardware list if the
cancelled URB had qTDs.
Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland McGrath [Wed, 14 Oct 2009 21:16:38 +0000 (14:16 -0700)]
x86: linker script syntax nits
The linker scripts grew some use of weirdly wrong linker script syntax.
It happens to work, but it's not what the syntax is documented to be.
Clean it up to use the official syntax.
Signed-off-by: Roland McGrath <roland@redhat.com> CC: Ian Lance Taylor <iant@google.com>
Darren Salt [Wed, 14 Oct 2009 01:19:22 +0000 (02:19 +0100)]
Staging: rt2860sta: prevent a panic when disabling when associated
This fixes a panic which is triggered when the hardware "disappears" from
beneath the driver, i.e. when wireless is toggled off via Fn-F2 on various
EeePC models.
Stefan Richter [Wed, 7 Oct 2009 22:39:31 +0000 (00:39 +0200)]
firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
The Unit_Characteristics entry of an SBP-2 unit directory is not
mandatory as far as I can tell. If it is missing, we would probably
fail to log in into the target because firewire-sbp2 would not wait for
status after it sent the login request.
The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it
is executed exactly once before login, rather than 0..n times depending
on the target's config ROM. With targets with one or more
Unit_Characteristics entries, the result is the same as before.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Jarkko Nikula [Wed, 14 Oct 2009 16:56:35 +0000 (09:56 -0700)]
omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
This small typo written by author causes that McBSP receiver is disabled on
OMAP2430 and OMAP3430 even if only transmitter is stopped. This was noted
with ALSA SoC where simultaneous recording halted if playback was stopped
first.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Aaro Koskinen [Wed, 14 Oct 2009 16:56:34 +0000 (09:56 -0700)]
omap: RX-51: Drop I2C-1 speed to 2200
The I2C-1 bus frequency on RX-51 should be 2.2 MHz. The speed is limited
by TWL5030/GAIA; a higher speed could lead to errors on the interface. The
maximum speed depends on the system clock for GAIA: 2.2 MHz (if 19.2 MHz),
2.4 MHz (26 MHz) or 2.9 MHz (38.4 MHz).
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Sanjeev Premi [Wed, 14 Oct 2009 16:56:33 +0000 (09:56 -0700)]
omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
The symbol CONFIG_ISP1301_OMAP was defined twice in the
defconfig. This was causing the warning:
arch/arm/configs/omap3_beagle_defconfig:972:warning:
override: reassigning to symbol ISP1301_OMAP
Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Chris Mason [Wed, 14 Oct 2009 13:38:28 +0000 (09:38 -0400)]
Btrfs: always pin metadata in discard mode
We have an optimization in btrfs to allow blocks to be
immediately freed if they were allocated in this transaction and never
written. Otherwise they are pinned and freed when the transaction
commits.
This isn't optimal for discard mode because immediately freeing
them means immediately discarding them. It is better to give the
block to the pinning code and letting the (slow) discard happen later.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The discard support code in btrfs currently is guarded by ifdefs for
BIO_RW_DISCARD, which is never defines as it's the name of an enum
memeber. Just remove the useless ifdefs to actually enable the code.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Enable discard by default is not a good idea given the the trim speed
of SSD prototypes we've seen, and the carecteristics for many high-end
arrays. Turn of discards by default and require the -o discard option
to enable them on.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Yan, Zheng [Wed, 14 Oct 2009 13:24:59 +0000 (09:24 -0400)]
Btrfs: properly wait log writers during log sync
A recently fsync optimization make btrfs_sync_log skip calling
wait_for_writer in the single log writer case. This is incorrect
since the writer count can also be increased by btrfs_pin_log.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik [Tue, 13 Oct 2009 20:46:49 +0000 (16:46 -0400)]
Btrfs: fix possible ENOSPC problems with truncate
There's a problem where we don't do any space reservation for truncates, which
can cause you to OOPs because you will be allowed to go off in the weeds a bit
since we don't account for the delalloc bytes that are created as a result of
the truncate.
Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
The name showed up in /proc/interrupts also needs a change. I use
PMI (Performance monitoring interrupt) here, since it is the
official name used in Intel's documents.
Signed-off-by: Li Hong <lihong.hi@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091014105039.GA22670@uhli> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use cio_is_console() in io_subchannel_probe to indicate that the
special handling is console specific. As long as there is no other
subchannel for which this might be true, it is misleading to speak
of "early devices". Should more of these devices be introduced,
a cleanup of all console special handling is in order anyway.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Wed, 14 Oct 2009 10:43:49 +0000 (12:43 +0200)]
[S390] call home support: fix proc handler
8d65af78 "sysctl: remove "struct file *" argument of ->proc_handler"
removed the struct file argument from all proc_handlers but didn't
change the call home proc handler (or call home was merged later).
Stefan Haberland [Wed, 14 Oct 2009 10:43:48 +0000 (12:43 +0200)]
[S390] dasd: use idal for device characteristics
If the rdc_buffer is above 2G we need indirect addresssing so we have
to use an idaw to give the rdc_buffer to the ccw.
If the rdc_buffer is under 2G nothing changes.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Michael Holzheu [Wed, 14 Oct 2009 10:43:45 +0000 (12:43 +0200)]
[S390] tape390: Fix request queue handling in block driver
When setting a channel attached tape online under Linux 2.6.31, the
"vol_id" process from udev hangs in sync_page():
2 sync_page+144 [0x1dfaac]
3 __wait_on_bit_lock+194 [0x58c23e]
4 __lock_page+116 [0x1df9dc]
5 truncate_inode_pages_range+728 [0x1ed7cc]
6 __blkdev_put+244 [0x25f738]
7 __fput+300 [0x229c4c]
8 filp_close+122 [0x225a3a]
The reason for that is an error in the request queue handling. It can
happen that we fetch a request, but do not process it further because
the number of queued requests exceeds TAPEBLOCK_MIN_REQUEUE.
To fix this, we should call blk_peek_request() instead of
blk_fetch_request() in the while condition and fetch the request in
the loop body afterwards.
Michael Holzheu [Wed, 14 Oct 2009 10:43:44 +0000 (12:43 +0200)]
[S390] hypfs: Use subcode 6 if subcode 7 is not available
Hypfs never worked on systems that only provide D204 subcode 6.
In these cases we nevertheless used subcode 7. With this fix, we
use subcode 6, if it is available and the system does not provide
subcode 7.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
projects / mirror_ubuntu-eoan-kernel.git / log