Bagas Sanjaya [Tue, 7 Mar 2023 04:35:26 +0000 (11:35 +0700)]
accel: Link to compute accelerator subsystem intro
Commit 2c204f3d53218d ("accel: add dedicated minor for accelerator
devices") adds link to accelerator nodes section of DRM internals doc
(Documentation/gpu/drm-internals.rst), but the target doesn't exist.
Instead, there is only an introduction doc for computer accelerator
subsytem.
Link to that doc until there is documentation of accelerator internals.
Fixes: 2c204f3d53218d ("accel: add dedicated minor for accelerator devices") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Tomer Tayar [Sun, 12 Mar 2023 15:15:03 +0000 (17:15 +0200)]
accel/habanalabs: remove '\n' when passing strings to gaudi2_print_event()
Remove all '\n' from strings which are passed as arguments to
gaudi2_print_event(), because the newline character is added internally
in this function.
Koby Elbaz [Tue, 7 Mar 2023 08:13:44 +0000 (10:13 +0200)]
accel/habanalabs: return tlb inv error code upon failure
Now that CQ-completion based jobs do not trigger a reset upon failure,
failure of such jobs (e.g., MMU cache invalidation) should be handled
by the caller itself depending on the error code returned to it.
- remove reset_sleep_ms arg from functions that don't use it.
- move the call msleep(reset_sleep_ms) from btm poll to gaudi2_hw_fini
as it is called from there already for other flow.
Dafna Hirschfeld [Mon, 20 Feb 2023 08:09:25 +0000 (10:09 +0200)]
accel/habanalabs: in hw_fini return error code if polling timed-out
In hw_fini callback, we use either the cpucp packet method or polling a
register. Currently we return error only in the case of cpucp packet
failure. In this patch we also return error if polling timed out.
Koby Elbaz [Mon, 6 Mar 2023 14:43:41 +0000 (16:43 +0200)]
accel/habanalabs: do not verify engine modes after being changed
Engines idle state can't always be verified between changes of
engine modes (e.g., stall/halt).
For example, if a CS is inflight when altering engine's mode,
idle state will return NOT idle, always.
Bjorn Helgaas [Tue, 7 Mar 2023 20:27:29 +0000 (14:27 -0600)]
accel/habanalabs: Drop redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since
commit f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"),
the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
Tomer Tayar [Wed, 1 Mar 2023 15:45:58 +0000 (17:45 +0200)]
accel/habanalabs: postpone mem_mgr IDR destruction to hpriv_release()
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used.
Dafna Hirschfeld [Mon, 20 Feb 2023 05:54:44 +0000 (07:54 +0200)]
accel/habanalabs: move soft-reset wait to soft-reset execute
We plan to do soft-reset either by mmio or by using cpucp packet
depending on the FW version. We don't want to check FW version in two
different places for that (execute soft-reset and wait to soft-reset)
so move the waiting to gaudi2_execute_soft_reset. This also makes sense
because the cpucp also does the waiting.
Koby Elbaz [Wed, 15 Feb 2023 15:51:14 +0000 (17:51 +0200)]
accel/habanalabs: add uapi to stall/resume engine
The user might want to stall/resume engines to perform power testing
for various scenarios. Because our current
HL_CS_FLAGS_ENGINE_CORE_COMMAND command only handles the engines' cores,
we need to add another opcode for handling entire engine and not just
its core.
The user supplies an array, where each entry holds the engine's ID and
the command to send to the engine. The size of the array is limited
by the number of engines in the ASIC (only Gaudi2 is currently
supported).
Tomer Tayar [Fri, 17 Feb 2023 10:56:48 +0000 (12:56 +0200)]
accel/habanalabs: use scnprintf() in print_device_in_use_info()
compose_device_in_use_info() was added to handle the snprintf() return
value in a single place.
However, the buffer size in print_device_in_use_info() is set such that
it would be enough for the max possible print, so
compose_device_in_use_info() is not really needed.
Moreover, scnprintf() can be used instead of snprintf(), to save the
check if the return value larger than the given size.
Koby Elbaz [Thu, 23 Feb 2023 16:17:02 +0000 (18:17 +0200)]
accel/habanalabs: use a mutex rather than a spinlock
There are two reasons why mutex is better here:
1. There's a critical section relatively long, where in
certain scenarios (e.g., multiple VM allocations) taking a spinlock
might cause noticeable performance degradation.
2. It will remove the incorrect usage of mutex under
spin_lock (where preemption is disabled).
Koby Elbaz [Tue, 21 Feb 2023 12:21:39 +0000 (14:21 +0200)]
accel/habanalabs: fix register address on PDMA/EDMA idle check
The PDMA/EDMA is_idle routines didn't check the correct CORE register
in order to get the accurate idle state.
Moreover, it's better to make the is_idle routine more robust by adding
additional checks (IS_HALTED) before announcing that the core is idle.
Koby Elbaz [Sun, 26 Feb 2023 06:22:45 +0000 (08:22 +0200)]
accel/habanalabs: remove a useless is_idle TPC flag
Is appears that the flag -
DCORE0_TPC0_CFG_STATUS_VECTOR_PIPE_EMPTY_MASK, has no actual use when
it comes to querying TPC idleness, since this flag's corresponding bit
turns-off after stalling the engine, and turns back on after resuming
it.
Koby Elbaz [Thu, 23 Feb 2023 08:43:14 +0000 (10:43 +0200)]
accel/habanalabs: verify return code after scrubbing ARCs DCCMs
In case the KDMA fails scrubbing the DCCMs (following a soft-reset
upon device release), the driver will only print failure until reset
flow ends, rather than escalating it into a hard-reset.
Dafna Hirschfeld [Wed, 15 Feb 2023 10:15:57 +0000 (12:15 +0200)]
accel/habanalabs: assert return value of hw_fini
Since hw_fini return error code for failure indication, we should
check its return value. Currently it might only fail upon soft-reset
from hl_device_reset. Later patch will add hw_fini failure in case of
polling timeout in hard-reset.
Tomer Tayar [Thu, 16 Feb 2023 17:54:32 +0000 (19:54 +0200)]
accel/habanalabs: add helper function to get vm hash node
Add a helper function to search the vm hash for a node with a given
virtual address.
As opposed to the current code, this function explicitly returns NULL
when no node is found, instead of basing on the loop cursor object's
value.
'irq_handler' in gaudi2_enable_msix(), is just assigned with a function
name and then used when calling request_threaded_irq().
Remove the variable and use the function name directly as an argument.
Tom Rix [Mon, 13 Feb 2023 14:48:14 +0000 (06:48 -0800)]
accel/habanalabs: set hl_capture_*_err storage-class-specifier to static
smatch reports
drivers/accel/habanalabs/common/device.c:2619:6: warning:
symbol 'hl_capture_hw_err' was not declared. Should it be static?
drivers/accel/habanalabs/common/device.c:2641:6: warning:
symbol 'hl_capture_fw_err' was not declared. Should it be static?
both are only used in device.c, so they should be static
Tom Rix [Wed, 8 Feb 2023 15:54:50 +0000 (07:54 -0800)]
accel/habanalabs: change unused extern decl of hdev to forward decl of hl_device
Building with clang W=2 has several similar warnings
drivers/accel/habanalabs/common/decoder.c:46:51: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void
dec_error_intr_work(struct hl_device *hdev, u32 base_addr, u32 core_id)
^
drivers/accel/habanalabs/common/security.h:13:26: note: previous declaration is here
extern struct hl_device *hdev;
^
There is no global definition of hdev, so the extern is not needed.
Searched with
grep -r '^struct' . | grep hl_dev
Change to an forward decl to resolve these issues
drivers/accel/habanalabs/common/mmu/../security.h:133:40: error: ‘struct hl_device’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
133 | bool (*skip_block_hook)(struct hl_device *hdev,
| ^~~~~~~~~
accel/habanalabs: don't trace cpu accessible dma alloc/free
The cpu accessible dma allocations use the gen_pool api which actually
does not allocate new memory from the system but manages memory already
allocated before. When tracing this together with real dma
allocation/free it cause confusing logs like a '0' dma address and
a cpu address appearing twice etc.
accel/habanalabs: in hl_device_reset small refactor for readabilty
in the out_err flow, combine the two cases of soft-reset since
they have mostly common code. In addition unlock reset_info.lock
after touching reset count.
Ofir Bitton [Mon, 16 Jan 2023 17:56:23 +0000 (19:56 +0200)]
accel/habanalabs: add support for TPC assert
In order to allow TPC engines to raise an assert, we must expose
the relevant MSIX interrupt to the user so he will configure the engine
correctly. In addition, we implement the corresponding interrupt
handler that will notify the user upon such an event.
Tal Cohen [Wed, 25 Jan 2023 18:29:15 +0000 (20:29 +0200)]
accel/habanalabs: change user interrupt to threaded IRQ
We prefer not to handle the user interrupt job inside the interrupt
context. Instead, use threaded IRQ to handle the user interrupts.
This will allow to avoid disabling interrupts when the user process
registers for a new event and to avoid long handling inside an
interrupt.
Tomer Tayar [Wed, 25 Jan 2023 09:38:56 +0000 (11:38 +0200)]
accel/habanalabs: enable graceful reset mechanism for compute-reset
The graceful reset mechanism is currently enabled only for reset
requests that will end up with hard-reset.
In future, reset requests due to errors in some device engines, are
going to be modified to request compute-reset, as the much longer
hard-reset is not really needed there.
To allow it, enable graceful reset also for compute-reset, and reset
after user releases the device won't be escalated to hard-reset in those
cases.
If watchdog expires and user didn't release the device, hard-reset will
be initiated in any case.
Koby Elbaz [Sun, 29 Jan 2023 11:35:58 +0000 (13:35 +0200)]
accel/habanalabs: disable PCI when escalating compute to hard-reset
In case a compute reset has failed or a request for a hard reset has
just arrived, then we escalate current reset procedure from compute
to hard-reset.
In such a case, the FW should be aware of the updated error cause,
and if LKD is the one who performs the reset (rather than the FW),
then we ask the FW to disable PCI access.
We would also like to have relevant debug info and therefore
we print the currently escalating reset type.
Ofir Bitton [Sun, 22 Jan 2023 12:06:15 +0000 (14:06 +0200)]
accel/habanalabs: expose engine core int reg address
In order for engine cores to raise interrupts towards FW, They need
to know which register the event data should be written to.
Hence, we forward the relevant scratchpad register received during
dynamic regs handshake with FW.
Moti Haimovski [Tue, 10 Jan 2023 15:35:31 +0000 (17:35 +0200)]
accel/habanalabs: add critical-event bit in notifier
Enhance the existing user notifications by adding a HW and FW critical
event bits to be used when a HW or FW event occur that requires
both SW abort and hard-resetting the chip.
Tomer Tayar [Sun, 22 Jan 2023 10:17:02 +0000 (12:17 +0200)]
accel/habanalabs: enforce release order of compute device and dma-buf
When user closes the compute device file descriptor without closing a
dma-buf file descriptor, the device will be considered as in use,
leading to hard reset and killing the user process, to ensure the
release of the dma-buf.
Same thing will happen if user first releases the compute device file
and only then the dma-buf.
The implication of this is the duration of hard reset, during which the
device cannot be reacquired.
Moreover, this behavior adds a constraint on a user process to follow
this order of release operations.
To avoid killing the user process and to remove this constraint, enforce
the correct order of release operations inside the driver, by
incrementing the device file refcount for any dma-buf until it is
released.
Tomer Tayar [Wed, 18 Jan 2023 15:35:17 +0000 (17:35 +0200)]
accel/habanalabs: add info when FD released while device still in use
When user closes the device file descriptor, it is checked whether the
device is still in use, and a message is printed if it is.
To make this message more informative, add to this print also the reason
due to which the device is considered as in use.
The possible reasons which are checked for now are active CS and
exported dma-buf.
PSOC RAZWI handling code did not took into account single router that
supports several initiators with different XY coordinates. Also, it
ignored XY_HI coordinate. This caused 2 problems:
1. RAZWI handle ignored some initiators.
2. When getting PSOC RAZWI from some routers, there was a lot of
possible engines which could have caused the RAZWI.
Fixed the above issue by handling PSOC RAZWI with both low and high
XY coordinates. This way driver supports all initiators and in
the worst case there are not more than 2 possible engines for RAZWI.
Oded Gabbay [Sun, 22 Jan 2023 12:59:11 +0000 (14:59 +0200)]
accel/habanalabs: split cdev creation to separate function
Move the cdev creation code from the main hdev init function to
a separate function. This will make the code more readable once we
add the accel registration code (instead/in addition to legacy
cdev).
Koby Elbaz [Sun, 22 Jan 2023 09:30:26 +0000 (11:30 +0200)]
accel/habanalabs: capture RAZWI info only if HW indication detected
RAZWI handling routine is called from most EQ events,
no matter if a RAZWI happens or not.
This fix is added to verify the handler is called only if
a real RAZWI indication in HW has been detected.
Ofir Bitton [Wed, 18 Jan 2023 07:46:16 +0000 (09:46 +0200)]
accel/habanalabs: increase user interrupt grace time
Currently we support scenarios where a timestamp registration request
of a certain offset is received during the interrupt handling of the
same offset. In this case we give a grace period of up to 100us for
the interrupt handler to finish.
It seems that sometimes the interrupt handling takes more than expected,
and therefore this path should be optimized. Until that happens, let's
increase the grace period in order not to reach timeout which will
cause user call to be rejected.
Dave Airlie [Tue, 14 Mar 2023 02:17:27 +0000 (12:17 +1000)]
Merge tag 'drm-misc-next-2023-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.4-rc1:
Note: Only changes since pull request from 2023-02-23 are included here.
UAPI Changes:
- Convert rockchip bindings to YAML.
- Constify kobj_type structure in dma-buf.
- FBDEV cmdline parser fixes, and other small fbdev fixes for mode
parsing.
Cross-subsystem Changes:
- Add Neil Armstrong as linaro maintainer.
- Actually signal the private stub dma-fence.
Core Changes:
- Add function for adding syncobj dep to sched_job and use it in panfrost, v3d.
- Improve DisplayID 2.0 topology parsing and EDID parsing in general.
- Add a gem eviction function and callback for generic GEM shrinker
purposes.
- Prepare to convert shmem helper to use the GEM reservation lock instead of own
locking. (Actual commit itself got reverted for now)
- Move the suballocator from radeon and amdgpu drivers to core in preparation
for Xe.
- Assorted small fixes and documentation.
- Fixes to HPD polling.
- Assorted small fixes in simpledrm, bridge, accel, shmem-helper,
and the selftest of format-helper.
- Remove dummy resource when ttm bo is created, and during pipelined
gutting. Fix all drivers to accept a NULL ttm_bo->resource.
- Handle pinned BO moving prevention in ttm core.
- Set drm panel-bridge orientation before connector is registered.
- Remove dumb_destroy callback.
- Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's.
- Add atomic enable_plane callback, use it in ast, mgag200, tidss.
Driver Changes:
- Use drm_gem_objects_lookup in vc4.
- Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau.
- Allow virtio KMS to be disabled and compiled out.
- Add Radxa 8/10HD, Samsung AMS495QA01 panels.
- Fix ivpu compiler errors.
- Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem,
nouveau, vc4.
- Assorted cleanups, simplifications and fixes to vmwgfx.
Linus Torvalds [Sun, 12 Mar 2023 23:15:36 +0000 (16:15 -0700)]
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Morten Linderud [Wed, 15 Feb 2023 09:25:52 +0000 (10:25 +0100)]
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Linus Torvalds [Sun, 12 Mar 2023 16:47:08 +0000 (09:47 -0700)]
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Linus Torvalds [Sun, 12 Mar 2023 16:17:30 +0000 (09:17 -0700)]
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Linus Torvalds [Sun, 12 Mar 2023 16:12:03 +0000 (09:12 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Linus Torvalds [Sun, 12 Mar 2023 16:04:28 +0000 (09:04 -0700)]
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Linus Torvalds [Sun, 12 Mar 2023 16:00:54 +0000 (09:00 -0700)]
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Linus Torvalds [Sun, 12 Mar 2023 15:55:55 +0000 (08:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Linus Torvalds [Sun, 12 Mar 2023 15:52:03 +0000 (08:52 -0700)]
cpumask: relax sanity checking constraints
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Linus Torvalds [Sat, 11 Mar 2023 17:24:05 +0000 (09:24 -0800)]
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Zhihao Cheng [Wed, 8 Mar 2023 03:26:43 +0000 (11:26 +0800)]
ext4: zero i_disksize when initializing the bootloader inode
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
Ye Bin [Tue, 7 Mar 2023 06:17:03 +0000 (14:17 +0800)]
ext4: make sure fs error flag setted before clear journal error
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Ye Bin [Tue, 7 Mar 2023 06:17:02 +0000 (14:17 +0800)]
ext4: commit super block if fs record error when journal record without error
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Theodore Ts'o [Wed, 8 Mar 2023 04:15:49 +0000 (23:15 -0500)]
ext4, jbd2: add an optimized bmap for the journal inode
The generic bmap() function exported by the VFS takes locks and does
checks that are not necessary for the journal inode. So allow the
file system to set a journal-optimized bmap function in
journal->j_bmap.
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ye Bin [Tue, 7 Mar 2023 01:52:52 +0000 (09:52 +0800)]
ext4: move where set the MAY_INLINE_DATA flag is set
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Linus Torvalds [Sat, 11 Mar 2023 04:45:53 +0000 (20:45 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twenty fixes all in drivers except the one zone storage revalidation
fix to sd.
The megaraid_sas fixes are more on the level of a driver update
(enabling crash dump and increasing lun number) but I thought you
could let this slide on -rc1 and the next most extensive update is a
load of fixes to mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix wrong zone_write_granularity value during revalidate
scsi: storvsc: Handle BlockSize change in Hyper-V VHD/VHDX file
scsi: megaraid_sas: Driver version update to 07.725.01.00-rc1
scsi: megaraid_sas: Add crash dump mode capability bit in MFI capabilities
scsi: megaraid_sas: Update max supported LD IDs to 240
scsi: mpi3mr: Bad drive in topology results kernel crash
scsi: mpi3mr: NVMe command size greater than 8K fails
scsi: mpi3mr: Return proper values for failures in firmware init path
scsi: mpi3mr: Wait for diagnostic save during controller init
scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabled
scsi: mpi3mr: ioctl timeout when disabling/enabling interrupt
scsi: lpfc: Avoid usage of list iterator variable after loop
scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read()
scsi: ufs: mcq: qcom: Clean the return path of ufs_qcom_mcq_config_resource()
scsi: ufs: mcq: qcom: Fix passing zero to PTR_ERR
scsi: ufs: ufs-qcom: Remove impossible check
scsi: ufs: core: Add soft dependency on governor_simpleondemand
scsi: hisi_sas: Check devm_add_action() return value
scsi: qla2xxx: Add option to disable FC2 Target support
scsi: target: iscsi: Fix an error message in iscsi_check_key()
Linus Torvalds [Sat, 11 Mar 2023 04:06:49 +0000 (20:06 -0800)]
Merge tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix a regression in exclusive mode handling of the partition code,
introduced in this merge windoe (Yu)
- Fix for a use-after-free in BFQ (Yu)
- Add sysfs documentation for the 'hidden' attribute (Sagi)
* tag 'block-6.3-2023-03-09' of git://git.kernel.dk/linux:
block, bfq: fix uaf for 'stable_merge_bfqq'
docs: sysfs-block: document hidden sysfs entry
block: fix wrong mode for blkdev_put() from disk_scan_partitions()
Linus Torvalds [Sat, 11 Mar 2023 03:09:18 +0000 (19:09 -0800)]
Merge tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull put_and_unmap_page() helper from Al Viro:
"kmap_local_page() conversions in local filesystems keep running into
kunmap_local_page()+put_page() combinations. We can keep inventing
names for identical inline helpers, but it's getting rather
inconvenient. I've added a trivial helper to linux/highmem.h instead.
I would've held that back until the merge window, if not for the mess
it causes in tree topology - I've several branches merging from that
one, and it's only going to get worse if e.g. ext2 stuff gets picked
by Jan"
* tag 'pull-highmem' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
new helper: put_and_unmap_page()
Linus Torvalds [Sat, 11 Mar 2023 03:04:10 +0000 (19:04 -0800)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc fixes from Al Viro:
"pick_file() speculation fix + fix for alpha mis(merge,cherry-pick)
The fs/file.c one is a genuine missing speculation barrier in
pick_file() (reachable e.g. via close(2)). The alpha one is strictly
speaking not a bug fix, but only because confusion between
preempt_enable() and preempt_disable() is harmless on architecture
without CONFIG_PREEMPT.
Looks like alpha.git picked the wrong version of patch - that braino
used to be there in early versions, but it had been fixed quite a
while ago..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: prevent out-of-bounds array speculation when closing a file descriptor
alpha: fix lazy-FPU mis(merged/applied/whatnot)
Linus Torvalds [Fri, 10 Mar 2023 17:19:30 +0000 (09:19 -0800)]
Merge tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- RISC-V architecture-specific ELF attributes have been disabled in the
kernel builds
- A fix for a locking failure while during errata patching that
manifests on SiFive-based systems
- A fix for a KASAN failure during stack unwinding
- A fix for some lockdep failures during text patching
* tag 'riscv-for-linus-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't check text_mutex during stop_machine
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
RISC-V: fix taking the text_mutex twice during sifive errata patching
RISC-V: Stop emitting attributes
Linus Torvalds [Fri, 10 Mar 2023 16:57:46 +0000 (08:57 -0800)]
Merge tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly fixes.
msm and amdgpu are the vast majority of these, otherwise some
straggler misc from last week for nouveau and cirrus and a mailmap
update for a drm developer.
mailmap:
- add an entry
nouveau:
- fix system shutdown regression
- build warning fix
amdgpu:
- Misc display fixes
- UMC 8.10 fixes
- Driver unload fixes
- NBIO 7.3.0 fix
- Error checking fixes for soc15, nv, soc21 read register interface
- Fix video cap query for VCN 4.0.4
amdkfd:
- Fix return check in doorbell handling"
* tag 'drm-fixes-2023-03-10' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu/soc21: Add video cap query support for VCN_4_0_4
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for nv
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc21
drm/amdgpu: fix error checking in amdgpu_read_mm_registers for soc15
drm/amdgpu: Fix the warning info when removing amdgpu device
drm/amdgpu: fix return value check in kfd
drm/amd: Fix initialization mistake for NBIO 7.3.0
drm/amdgpu: Fix call trace warning and hang when removing amdgpu device
mailmap: add mailmap entries for Faith.
drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer needed
drm/amd/display: Update clock table to include highest clock setting
drm/amd/pm: Enable ecc_info table support for smu v13_0_10
drm/amdgpu: Support umc node harvest config on umc v8_10
drm/connector: print max_requested_bpc in state debugfs
drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF
drm/msm/dpu: clear DSPP reservations in rm release
drm/msm/disp/dpu: fix sc7280_pp base offset
drm/msm/dpu: fix stack smashing in dpu_hw_ctl_setup_blendstage
drm/msm/dpu: don't use DPU_CLK_CTRL_CURSORn for DMA SSPP clocks
drm/msm/dpu: fix clocks settings for msm8998 SSPP blocks
...
Linus Torvalds [Fri, 10 Mar 2023 16:51:57 +0000 (08:51 -0800)]
Merge tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one reverts an improper fix which can cause an
unexpected warning more often on specific images, and another one
fixes LZMA decompression on 32-bit platforms. The others are minor
fixes and cleanups.
- Fix LZMA decompression failure on HIGHMEM platforms
- Revert an inproper fix since it is actually an implementation issue
of vmalloc()
- Avoid a wrong DBG_BUGON since it could be triggered with -EINTR
- Minor cleanups"
* tag 'erofs-for-6.3-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use wrapper i_blocksize() in erofs_file_read_iter()
erofs: get rid of a useless DBG_BUGON
erofs: Revert "erofs: fix kvcalloc() misuse with __GFP_NOFAIL"
erofs: fix wrong kunmap when using LZMA on HIGHMEM platforms
erofs: mark z_erofs_lzma_init/erofs_pcpubuf_init w/ __init
Linus Torvalds [Fri, 10 Mar 2023 16:45:30 +0000 (08:45 -0800)]
Merge tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Linus Torvalds [Fri, 10 Mar 2023 16:39:13 +0000 (08:39 -0800)]
Merge tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"First batch of fixes. Among them there are two updates to sysfs and
ioctl which are not strictly fixes but are used for testing so there's
no reason to delay them.
- fix block group item corruption after inserting new block group
- fix extent map logging bit not cleared for split maps after
dropping range
- fix calculation of unusable block group space reporting bogus
values due to 32/64b division
- fix unnecessary increment of read error stat on write error
- improve error handling in inode update
- export per-device fsid in DEV_INFO ioctl to distinguish seeding
devices, needed for testing
- allocator size classes:
- fix potential dead lock in size class loading logic
- print sysfs stats for the allocation classes"
* tag 'for-6.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix block group item corruption after inserting new block group
btrfs: fix extent map logging bit not cleared for split maps after dropping range
btrfs: fix percent calculation for bg reclaim message
btrfs: fix unnecessary increment of read error stat on write error
btrfs: handle btrfs_del_item errors in __btrfs_update_delayed_inode
btrfs: ioctl: return device fsid from DEV_INFO ioctl
btrfs: fix potential dead lock in size class loading logic
btrfs: sysfs: add size class stats
projects / mirror_ubuntu-kernels.git / log