drm/msm/dpu: move UBWC/memory configuration to separate struct
UBWC and highest bank settings differ slightly between different DPU
units of the same generation, while the dpu_caps and dpu_mdp_cfg are
much more stable. To ease configuration reuse move ubwc_swizzle and
highest_bank_bit data to separate structure.
Konrad Dybcio [Tue, 4 Apr 2023 13:05:43 +0000 (16:05 +0300)]
drm/msm/dpu: Allow variable INTF_BLK size
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x280) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some lengths, split the INTF changes away] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/530816/ Link: https://lore.kernel.org/r/20230404130622.509628-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio [Tue, 4 Apr 2023 13:05:42 +0000 (16:05 +0300)]
drm/msm/dpu: Allow variable SSPP_BLK size
These blocks are of variable length on different SoCs. Set the
correct values where I was able to retrieve it from downstream
DTs and leave the old defaults (0x1c8) otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[DB: fixed some of lengths, split the INTF changes away] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/530814/ Link: https://lore.kernel.org/r/20230404130622.509628-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio [Sat, 18 Mar 2023 13:42:52 +0000 (14:42 +0100)]
drm/msm/dsi: Switch the QCM2290-specific compatible to index autodetection
Now that the logic can handle multiple sets of registers, move
the QCM2290 to the common logic and mark it deprecated. This allows us
to remove a couple of structs, saving some memory.
Konrad Dybcio [Sat, 18 Mar 2023 13:42:51 +0000 (14:42 +0100)]
drm/msm/dsi: dsi_cfg: Merge SC7180 config into SDM845
The configs are identical, other than the number of *maximum* DSI
hosts allowed. This isn't an issue, unless somebody deliberately
tries to access the inexistent host by adding a dt node for it.
Remove the SC7180 struct and point the hw revision match to the
SDM845's one. On a note, this could have been done back when
7180 support was introduced.
Douglas Anderson [Fri, 27 Jan 2023 01:09:13 +0000 (17:09 -0800)]
drm/msm/dp: Return IRQ_NONE for unhandled interrupts
If our interrupt handler gets called and we don't really handle the
interrupt then we should return IRQ_NONE. The current interrupt
handler didn't do this, so let's fix it.
NOTE: for some of the cases it's clear that we should return IRQ_NONE
and some cases it's clear that we should return IRQ_HANDLED. However,
there are a few that fall somewhere in between. Specifically, the
documentation for when to return IRQ_NONE vs. IRQ_HANDLED is probably
best spelled out in the commit message of commit d9e4ad5badf4 ("Document
that IRQ_NONE should be returned when IRQ not actually handled"). That
commit makes it clear that we should return IRQ_HANDLED if we've done
something to make the interrupt stop happening.
The case where it's unclear is, for instance, in dp_aux_isr() after
we've read the interrupt using dp_catalog_aux_get_irq() and confirmed
that "isr" is non-zero. The function dp_catalog_aux_get_irq() not only
reads the interrupts but it also "ack"s all the interrupts that are
returned. For an "unknown" interrupt this has a very good chance of
actually stopping the interrupt from happening. That would mean we've
identified that it's our device and done something to stop them from
happening and should return IRQ_HANDLED. Specifically, it should be
noted that most interrupts that need "ack"ing are ones that are
one-time events and doing an "ack" is enough to clear them. However,
since these interrupts are unknown then, by definition, it's unknown
if "ack"ing them is truly enough to clear them. It's possible that we
also need to remove the original source of the interrupt. In this
case, IRQ_NONE would be a better choice.
Given that returning an occasional IRQ_NONE isn't the absolute end of
the world, however, let's choose that course of action. The IRQ
framework will forgive a few IRQ_NONE returns now and again (and it
won't even log them, which is why we have to log them ourselves). This
means that if we _do_ end hitting an interrupt where "ack"ing isn't
enough the kernel will eventually detect the problem and shut our
device down.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/520660/ Link: https://lore.kernel.org/r/20230126170745.v2.2.I2d7aec2fadb9c237cd0090a47d6a8ba2054bf0f8@changeid
[DB: reformatted commit message to make checkpatch happy] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Konrad Dybcio [Sat, 18 Mar 2023 13:42:49 +0000 (14:42 +0100)]
drm/msm/dsi: Fix DSI index detection when version clash occurs
Currently, we allow for MAX_DSI entries in io_start to facilitate for
MAX_DSI number of DSI hosts at different addresses. The configuration
is matched against the DSI CTRL hardware revision read back from the
component. We need a way to resolve situations where multiple SoCs
with different register maps may use the same version of DSI CTRL. In
preparation to do so, make msm_dsi_config a 2d array where each entry
represents a set of configurations adequate for a given SoC.
This is totally fine to do, as the only differentiating factors
between same-version-different-SoCs configurations are the number of
DSI hosts (1 or 2, at least as of today) and the set of base registers.
The regulator setup is the same, because the DSI hardware is the same,
regardless of the SoC it was implemented in.
In addition to that, update the matching logic such that it will loop
over VARIANTS_MAX variants, making sure they are all taken into account.
Douglas Anderson [Fri, 27 Jan 2023 01:09:12 +0000 (17:09 -0800)]
drm/msm/dp: Clean up handling of DP AUX interrupts
The DP AUX interrupt handling was a bit of a mess.
* There were two functions (one for "native" transfers and one for
"i2c" transfers) that were quite similar. It was hard to say how
many of the differences between the two functions were on purpose
and how many of them were just an accident of how they were coded.
* Each function sometimes used "else if" to test for error bits and
sometimes didn't and again it was hard to say if this was on purpose
or just an accident.
* The two functions wouldn't notice whether "unknown" bits were
set. For instance, there seems to be a bit "DP_INTR_PLL_UNLOCKED"
and if it was set there would be no indication.
* The two functions wouldn't notice if more than one error was set.
Let's fix this by being more consistent / explicit about what we're
doing.
By design this could cause different handling for AUX transfers,
though I'm not actually aware of any bug fixed as a result of
this patch (this patch was created because we simply noticed how odd
the old code was by code inspection). Specific notes here:
1. In the old native transfer case if we got "done + wrong address"
we'd ignore the "wrong address" (because of the "else if"). Now we
won't.
2. In the old native transfer case if we got "done + timeout" we'd
ignore the "timeout" (because of the "else if"). Now we won't.
3. In the old native transfer case we'd see "nack_defer" and translate
it to the error number for "nack". This differed from the i2c
transfer case where "nack_defer" was given the error number for
"nack_defer". This 100% can't matter because the only user of this
error number treats "nack defer" the same as "nack", so it's clear
that the difference between the "native" and "i2c" was pointless
here.
4. In the old i2c transfer case if we got "done" plus any error
besides "nack" or "defer" then we'd ignore the error. Now we don't.
5. If there is more than one error signaled by the hardware it's
possible that we'll report a different one than we used to. I don't
know if this matters. If someone is aware of a case this matters we
should document it and change the code to make it explicit.
6. One quirk we keep (I don't know if this is important) is that in
the i2c transfer case if we see "done + defer" we report that as a
"nack". That seemed too intentional in the old code to just drop.
After this change we will add extra logging, including:
* A warning if we see more than one error bit set.
* A warning if we see an unexpected interrupt.
* A warning if we get an AUX transfer interrupt when shouldn't.
It actually turns out that as a result of this change then at boot we
sometimes see an error:
[drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy
That means that, during init, we are seeing DP_INTR_PLL_UNLOCKED. For
now I'm going to say that leaving this error reported in the logs is
OK-ish and hopefully it will encourage someone to track down what's
going on at init time.
One last note here is that this change renames one of the interrupt
bits. The bit named "i2c done" clearly was used for native transfers
being done too, so I renamed it to indicate this.
Konrad Dybcio [Sat, 18 Mar 2023 13:42:48 +0000 (14:42 +0100)]
drm/msm/dsi: Get rid of msm_dsi_config::num_dsi
In preparation for supporting multiple sets of possible base registers,
remove the num_dsi variable. We're comparing the io_start array contents
with the reg value from the DTS, so it will either match one of the
expected values or don't match against a zero (which we get from partial
array initialization).
The point of the previous cleanup was to disallow "qcom,mdss-dsi-ctrl"
alone. This however didn't quite work out and the property became
undocumented instead of deprecated. Fix that.
Additionally, the "qcom," prefix was missed previously. Fix it.
Fixes: 0c0f65c6dd44 ("dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC") Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527651/ Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-1-70e13b1214fa@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Vinod Polimera [Fri, 31 Mar 2023 13:58:32 +0000 (19:28 +0530)]
drm/msm/dpu: set dirty_fb flag while in self refresh mode
While in virtual terminal mode with PSR enabled, there will be
no atomic commits triggered without dirty_fb being set. This
will create a notion of no screen update. Allow atomic commit
when dirty_fb ioctl is issued, so that it can trigger a PSR exit
and shows update on the screen.
Kalyan Thota [Mon, 13 Feb 2023 11:11:44 +0000 (03:11 -0800)]
drm/msm/dpu: manage DPU resources if CTM is requested
Allow modeset to be triggered during CTM enable/disable.
In the modeset callbacks, DPU resources required for the
CTM feature are managed appropriately.
drm/msm/dpu: Fix bit-shifting UB in DPU_HW_VER() macro
With gcc-5 and CONFIG_UBSAN_SHIFT=y:
drivers/gpu/drm/msm/msm_mdss.c: In function 'msm_mdss_enable':
drivers/gpu/drm/msm/msm_mdss.c:296:2: error: case label does not reduce to an integer constant
case DPU_HW_VER_800:
^
drivers/gpu/drm/msm/msm_mdss.c:299:2: error: case label does not reduce to an integer constant
case DPU_HW_VER_810:
^
drivers/gpu/drm/msm/msm_mdss.c:300:2: error: case label does not reduce to an integer constant
case DPU_HW_VER_900:
^
This happens because for major revisions 8 or greather, the non-sign bit
of the major revision number is shifted into bit 31 of a signed integer,
which is undefined behavior.
Fix this by casting the major revision number to unsigned int.
Fixes: efcd0107727c4f04 ("drm/msm/dpu: add support for SM8550") Fixes: 4a352c2fc15aec1e ("drm/msm/dpu: Introduce SC8280XP") Fixes: 100d7ef6995d1f86 ("drm/msm/dpu: add support for SM8450") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/525152/ Link: https://lore.kernel.org/r/20230306090633.65918-1-geert+renesas@glider.be Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:51 +0000 (19:16 +0300)]
drm/msm/dpu: drop smart_dma_rev from dpu_caps
The code doesn't use dpu_caps::smart_dma_rev field. It checks if the
corresponding feature is enabled in the SSPP features. Drop the
smart_dma_rev field completely.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:49 +0000 (19:16 +0300)]
drm/msm/dpu: populate SmartDMA features in hw catalog
Downstream driver uses dpu->caps->smart_dma_rev to update
sspp->cap->features with the bit corresponding to the supported SmartDMA
version. Upstream driver does not do this, resulting in SSPP subdriver
not enabling setup_multirect callback. Add corresponding SmartDMA SSPP
feature bits to dpu hw catalog.
Per Abhinav's request enable the SmartDMA features only on the platforms
where the multirect was actually verified visually (sdm845 and sm8250).
An (untested) enablement on the rest of the platforms comes in the next
patch.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:48 +0000 (19:16 +0300)]
drm/msm/dpu: add support for wide planes
It is possible to use multirect feature and split source to use the SSPP
to output two consecutive rectangles. This commit brings in this
capability to support wider screen resolutions.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:44 +0000 (19:16 +0300)]
drm/msm/dpu: rework dpu_plane_atomic_check()
Split pipe-dependent code from dpu_plane_atomic_check() into the
separate function dpu_plane_atomic_check_pipe(). This is one of
preparational steps to add r_pipe support.
Split pipe-dependent code from dpu_plane_sspp_atomic_update() into the
separate function dpu_plane_sspp_update_pipe(). This is one of
preparational steps to add r_pipe support.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:42 +0000 (19:16 +0300)]
drm/msm/dpu: simplify dpu_plane_validate_src()
The plane's clipped coordinates has already been validated against FB
size in the drm_atomic_plane_check(). There is no need to check them
again. Remove corresponding checks and inline dpu_plane_validate_src().
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:41 +0000 (19:16 +0300)]
drm/msm/dpu: add dpu_hw_sspp_cfg to dpu_plane_state
Now as all accesses to pipe_cfg and pstate have been cleaned, add
struct dpu_hw_sspp_cfg to struct dpu_plane_state, so that
dpu_plane_atomic_check() and dpu_plane_atomic_update() do not have a
chance to disagree about src/dst rectangles (currently
dpu_plane_atomic_check() uses unclipped rectangles, while
dpu_plane_atomic_update() uses clipped rectangles calculated by
drm_atomic_helper_check_plane_state()).
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:39 +0000 (19:16 +0300)]
drm/msm/dpu: rewrite plane's QoS-related functions to take dpu_sw_pipe and dpu_format
Rewrite dpu_plane's QoS related functions to take struct dpu_sw_pipe and
struct dpu_format as arguments rather than fetching them from the
pstate or drm_framebuffer.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:38 +0000 (19:16 +0300)]
drm/msm/dpu: drop redundant plane dst check from dpu_crtc_atomic_check()
The helper drm_atomic_helper_check_plane_state() already checks whether
the scaled and clipped plane falls into the CRTC visible region (and
clears plane_state->visible if it doesn't). Drop the redundant check
from dpu_crtc_atomic_check().
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:36 +0000 (19:16 +0300)]
drm/msm/dpu: don't use unsupported blend stages
The dpu_crtc_atomic_check() compares blending stage with DPU_STAGE_MAX
(maximum amount of blending stages supported by the driver), however we
should compare it against .max_mixer_blendstages, the maximum blend
stage supported by the mixer.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:35 +0000 (19:16 +0300)]
drm/msm/dpu: drop src_split and multirect check from dpu_crtc_atomic_check
Neither source split nor multirect are properly supported at this
moment. Both of these checks depend on normalized_zpos being equal for
several planes (which is never the case for normalized zpos).
Drop these checks to simplify dpu_crtc_atomic_check(). The actual
support for either of these features is not removed from the backend
code (sspp, ctl, etc).
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:33 +0000 (19:16 +0300)]
drm/msm/dpu: remove dpu_hw_fmt_layout from struct dpu_hw_sspp_cfg
Remove dpu_hw_fmt_layout instance from struct dpu_hw_sspp_cfg, leaving
only src_rect and dst_rect. This way all the pipes used by the plane
will have a common layout instance (as the framebuffer is shared between
them), while still keeping a separate src/dst rectangle configuration
for each pipe.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:26 +0000 (19:16 +0300)]
drm/msm/dpu: move pipe_hw to dpu_plane_state
In preparation to adding fully virtualized planes, move struct
dpu_hw_sspp instance from struct dpu_plane to struct dpu_plane_state, as
it will become a part of state (variable, changes during runtime) rather
than part of a plane (ideally should be statically allocated during boot).
The sspp pointer is set at the dpu_plane_reset(), since this is the
function which allocates the state. Once we have fully virtual
plane<->SSPP relationship, the SSPP will be allocated dynamically in the
dpu_plane_atomic_check() function.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:25 +0000 (19:16 +0300)]
drm/msm/dpu: drop EAGAIN check from dpu_format_populate_layout
The pipe's layout is not cached, corresponding data structure is zeroed
out each time in the dpu_plane_sspp_atomic_update(), right before the
call to _dpu_plane_set_scanout() -> dpu_format_populate_layout().
Drop plane_addr comparison against previous layout and corresponding
EAGAIN handling.
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:24 +0000 (19:16 +0300)]
drm/msm/dpu: move SSPP debugfs creation to dpu_kms.c
As SSPP blocks are now visible through dpu_kms->rm.sspp_blocks, move
SSPP debugfs creation from dpu_plane to dpu_kms. We are going to break
the 1:1 correspondence between planes and SSPPs, so it makes no sense
anymore to create SSPP debugfs entries in dpu_plane.c
Dmitry Baryshkov [Thu, 16 Mar 2023 16:16:22 +0000 (19:16 +0300)]
drm/msm/dpu: rename struct dpu_hw_pipe(_cfg) to dpu_hw_sspp(_cfg)
For all hardware blocks except SSPP the corresponding struct is named
after the block. Rename dpu_hw_pipe (SSPP structure) to dpu_hw_sspp.
Also rename struct dpu_hw_pipe_cfg to dpu_hw_sspp_cfg to follow this
change.
Leonard Lausen [Tue, 21 Mar 2023 02:58:04 +0000 (02:58 +0000)]
drm/msm/dpu: Add support for AR30 format
Commit da7716a249b699978fb5 ("drm/msm/dpu: Add support for XR30 format") enabled
support for the 10-bit XR30 color format but missed enabling support for the
corresponding per-pixel alpha-blending AR30 color format.
Declaring only XR30 but not AR30 color format support can trigger bugs in
userspace. KDE KWin compositor versions prior to 5.27.3 for example prefer
10-bit color formats, rendering a 1cm^2 black box around the cursor due to
missing per-pixel alpha-blending.
Jessica Zhang [Tue, 21 Feb 2023 18:42:55 +0000 (10:42 -0800)]
drm/msm/dpu: Remove empty prepare_commit() function
Now that the TE setup has been moved to prepare_for_kickoff(), we have
not prepare_commit() callbacks left. This makes dpu_encoder_prepare_commit()
do nothing. Remove prepare_commit() from DPU driver.
Changes in V3:
- Reworded commit message to be more clear
- Corrected spelling mistake in commit message
Changes in V4:
- Reworded commit message for clarity
Jessica Zhang [Tue, 21 Feb 2023 18:42:53 +0000 (10:42 -0800)]
drm/msm/dpu: Move TE setup to prepare_for_kickoff()
Currently, DPU will enable TE during prepare_commit(). However, this
will cause a crash and reboot to sahara when trying to read/write to
register in get_autorefresh_config(), because the core clock rates
aren't set at that time.
This used to work because phys_enc->hw_pp is only initialized in mode
set [1], so the first prepare_commit() will return before any register
read/write as hw_pp would be NULL.
However, when we try to implement support for INTF TE, we will run into
the clock issue described above as hw_intf will *not* be NULL on the
first prepare_commit(). This is because the initialization of
dpu_enc->hw_intf has been moved to dpu_encoder_setup() [2].
To avoid this issue, let's enable TE during prepare_for_kickoff()
instead as the core clock rates are guaranteed to be set then.
Depends on: "Implement tearcheck support on INTF block" [3]
Changes in V3:
- Added function prototypes
- Reordered function definitions to make change more legible
- Removed prepare_commit() function from dpu_encoder_phys_cmd
Changes in V4:
- Reworded commit message to be more specific
- Removed dpu_encoder_phys_cmd_is_ongoing_pptx() prototype
drm/msm: Implement fbdev emulation as in-kernel client
Move code from ad-hoc fbdev callbacks into DRM client functions
and remove the old callbacks. The functions instruct the client
to poll for changed output or restore the display. The DRM core
calls both, the old callbacks and the new client helpers, from
the same places. The new functions perform the same operation as
before, so there's no change in functionality.
Replace all code that initializes or releases fbdev emulation
throughout the driver. Instead initialize the fbdev client by a
single call to msm_fbdev_setup() after msm has registered its
DRM device. As in most drivers, msm's fbdev emulation now acts
like a regular DRM client.
The fbdev client setup consists of the initial preparation and the
hot-plugging of the display. The latter creates the fbdev device
and sets up the fbdev framebuffer. The setup performs display
hot-plugging once. If no display can be detected, DRM probe helpers
re-run the detection on each hotplug event.
A call to drm_dev_unregister() releases the client automatically.
No further action is required within msm. If the fbdev framebuffer
has been fully set up, struct fb_ops.fb_destroy implements the
release. For partially initialized emulation, the fbdev client
reverts the initial setup.
v2:
* handle fbdev module parameter correctly (kernel test robot)
Initialize the fbdev client in the fbdev code with empty helper
functions. Also clean up the client. The helpers will later
implement various functionality of the DRM client. No functional
changes.
drm/msm: Move module parameter 'fbdev' to fbdev code
Define the module's parameter 'fbdev' in fbdev code. No other code
uses it. No functional changes, but simplifies the later conversion
to struct drm_client.
drm/msm: Clear aperture ownership outside of fbdev code
Move aperture management out of the fbdev code. It is unrelated
and needs to run even if fbdev support has been disabled. Call
the helper at the top of msm_drm_init() to take over hardware
from other drivers.
v2:
* bind all subdevices before acquiring device (Dmitri)
Rob Clark [Fri, 24 Mar 2023 22:00:13 +0000 (15:00 -0700)]
drm/msm: Avoid rounding down to zero jiffies
If userspace asked for a timeout greater than zero, but less than a
jiffy, they clearly weren't planning on spinning. So it is better
to round up to one.
This fixes an issue with supertuxkart that was (for some reason)
spinning on a gl sync with 1ms timeout. CPU time for a demo lap
drops from:
15.83user 20.98system 0:47.46elapsed 77%CPU
drops to:
8.84user 2.30system 0:46.67elapsed 23%CPU
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528725/ Link: https://lore.kernel.org/r/20230324220013.191795-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DSI compatible changed between patchset revisions, but that wasn't
reflected in the bindings. Fix it.
Fixes: 0eda3c6cb1c5 ("dt-bindings: display/msm: add support for the display on SM8450") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/528589/ Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-1-0ca1bea1a843@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Maíra Canal [Fri, 24 Feb 2023 21:41:33 +0000 (18:41 -0300)]
drm/msm: Use drm_sched_job_add_syncobj_dependency()
As msm_parse_deps() performs the same steps as
drm_sched_job_add_syncobj_dependency(), replace the open-coded
implementation in msm in order to simply use the DRM function.
Johan Hovold [Mon, 6 Mar 2023 10:07:20 +0000 (11:07 +0100)]
drm/msm: fix workqueue leak on bind errors
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Fixes: 060530f1ea67 ("drm/msm: use componentised device support") Cc: stable@vger.kernel.org # 3.15 Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/ Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Johan Hovold [Mon, 6 Mar 2023 10:07:16 +0000 (11:07 +0100)]
drm/msm: fix NULL-deref on irq uninstall
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces") Cc: stable@vger.kernel.org # 5.14 Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/ Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Johan Hovold [Mon, 6 Mar 2023 10:07:15 +0000 (11:07 +0100)]
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Cc: stable@vger.kernel.org # 5.14 Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/ Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
A recent commit tried to address a drm device leak in the early
msm_drm_uninit() error paths but ended up making things worse.
Specifically, it moved the drm device reference put in msm_drm_uninit()
to msm_drm_init() which means that the drm would now be leaked on normal
unbind.
For reasons that were never spelled out, it also added kms NULL pointer
checks to a couple of helper functions that had nothing to do with the
paths modified by the patch.
Instead of trying to salvage this incrementally, let's revert the bad
commit so that clean and backportable fixes can be added in its place.
Fixes: 8636500300a0 ("drm/msm: Fix failure paths in msm_drm_init()") Cc: Akhil P Oommen <quic_akhilpo@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525092/ Link: https://lore.kernel.org/r/20230306100722.28485-3-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
A recent patch that tried to fix up the msm_drm_init() paths with
respect to the workqueue but only ended up making things worse:
First, the newly added calls to msm_drm_uninit() on early errors would
trigger NULL-pointer dereferences, for example, as the kms pointer would
not have been initialised. (Note that these paths were also modified by
a second broken error handling patch which in effect cancelled out this
part when merged.)
Second, the newly added allocation sanity check would still leak the
previously allocated drm device.
Instead of trying to salvage what was badly broken (and clearly not
tested), let's revert the bad commit so that clean and backportable
fixes can be added in its place.
Fixes: 643b7d0869cc ("drm/msm: Add missing check and destroy for alloc_ordered_workqueue") Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525107/ Link: https://lore.kernel.org/r/20230306100722.28485-2-johan+linaro@kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
projects / mirror_ubuntu-kernels.git / log