If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sascha Hauer [Tue, 16 Jun 2020 08:31:40 +0000 (10:31 +0200)]
net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphy
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets
referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed
SGMII). This is an upclocked 1000BaseX mode, thus
PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it.
adding support for it merely means writing the correct magic value into
the MVNETA_SERDES_CFG register.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Sascha Hauer [Tue, 16 Jun 2020 08:31:39 +0000 (10:31 +0200)]
net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy
The MVNETA_SERDES_CFG register is only available on older SoCs like the
Armada XP. On newer SoCs like the Armada 38x the fields are moved to
comphy. This patch moves the writes to this register next to the comphy
initialization, so that depending on the SoC either comphy or
MVNETA_SERDES_CFG is configured.
With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it
doesn't exist.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Jun 2020 15:06:26 +0000 (08:06 -0700)]
ionic: export features for vlans to use
Set up vlan_features for use by any vlans above us.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Tue, 16 Jun 2020 01:14:59 +0000 (18:14 -0700)]
ionic: no link check while resetting queues
If the driver is busy resetting queues after a change in
MTU or queue parameters, don't bother checking the link,
wait until the next watchdog cycle.
Fixes: 987c0871e8ae ("ionic: check for linkup in watchdog") Signed-off-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Those last two bytes - 96 1f - aren't part of the original packet.
In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte
'alignment pseudo header' from the start of the packet, and sets the
length from a per-packet field populated by hardware. It looks like that
length field *includes* the 2-byte header; the current driver assumes
that it's excluded.
This change trims the 2-byte alignment header after we've set the packet
length, so the resulting packet length is correct. While we're moving
the comment around, this also fixes the spelling of 'pseudo'.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests/bpf: Make sure optvals > PAGE_SIZE are bypassed
We are relying on the fact, that we can pass > sizeof(int) optvals
to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes).
In the BPF program we check that we can only touch PAGE_SIZE bytes,
but the real optlen is PAGE_SIZE * 2. In both cases, we override it to
some predefined value and trim the optlen.
Also, let's modify exiting IP_TOS usecase to test optlen=0 case
where BPF program just bypasses the data as is.
bpf: Don't return EINVAL from {get,set}sockopt when optlen > PAGE_SIZE
Attaching to these hooks can break iptables because its optval is
usually quite big, or at least bigger than the current PAGE_SIZE limit.
David also mentioned some SCTP options can be big (around 256k).
For such optvals we expose only the first PAGE_SIZE bytes to
the BPF program. BPF program has two options:
1. Set ctx->optlen to 0 to indicate that the BPF's optval
should be ignored and the kernel should use original userspace
value.
2. Set ctx->optlen to something that's smaller than the PAGE_SIZE.
v5:
* use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov)
* update the docs accordingly
v4:
* use temporary buffer to avoid optval == optval_end == NULL;
this removes the corner case in the verifier that might assume
non-zero PTR_TO_PACKET/PTR_TO_PACKET_END.
v3:
* don't increase the limit, bypass the argument
v2:
* proper comments formatting (Jakub Kicinski)
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Link: https://lore.kernel.org/bpf/20200617010416.93086-1-sdf@google.com
devmap: Use bpf_map_area_alloc() for allocating hash buckets
Syzkaller discovered that creating a hash of type devmap_hash with a large
number of entries can hit the memory allocator limit for allocating
contiguous memory regions. There's really no reason to use kmalloc_array()
directly in the devmap code, so just switch it to the existing
bpf_map_area_alloc() function that is used elsewhere.
Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
Tobias Klauser [Tue, 16 Jun 2020 11:33:03 +0000 (13:33 +0200)]
tools, bpftool: Add ringbuf map type to map command docs
Commit c34a06c56df7 ("tools/bpftool: Add ringbuf map to a list of known
map types") added the symbolic "ringbuf" name. Document it in the bpftool
map command docs and usage as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
Andrii Nakryiko [Tue, 16 Jun 2020 05:04:30 +0000 (22:04 -0700)]
bpf: bpf_probe_read_kernel_str() has to return amount of data read on success
During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on
success, instead of amount of data successfully read. This majorly breaks
applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str()
and their results. Fix this by returning actual number of bytes read.
Fixes: 8d92db5c04d1 ("bpf: rework the compat kernel probe handling") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616050432.1902042-1-andriin@fb.com
1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
fix from Stefano Brivio.
2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.
3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.
4) Accidently disabling NAPI in non-error paths of macb_open(), from
Charles Keepax.
5) Fix races between alx_stop and alx_remove, from Zekun Shen.
6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
Michael Chan.
7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.
8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.
9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
Yongjun.
10) We should not adjust the TCP window advertised when sending dup acks
in non-SACK mode, because it won't be counted as a dup by the sender
if the window size changes. From Eric Dumazet.
11) Destroy the right number of queues during remove in mvpp2 driver,
from Sven Auhagen.
12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
Gupta, and Arnd Bergmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
e1000e: fix unused-function warning
e1000: use generic power management
e1000e: Do not wake up the system via WOL if device wakeup is disabled
lan743x: add MODULE_DEVICE_TABLE for module loading alias
mlxsw: spectrum: Adjust headroom buffers for 8x ports
bareudp: Fixed configuration to avoid having garbage values
mvpp2: remove module bugfix
tcp: grow window for OOO packets only for SACK flows
mptcp: fix memory leak in mptcp_subflow_create_socket()
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
mvpp2: ethtool rxtx stats fix
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
rocker: fix incorrect error handling in dma_rings_init
test_objagg: Fix potential memory leak in error handling
net: ethernet: mtk-star-emac: simplify interrupt handling
mld: fix memory leak in ipv6_mc_destroy_dev()
bnxt_en: Return from timer if interface is not in open state.
bnxt_en: Fix AER reset logic on 57500 chips.
...
Linus Torvalds [Wed, 17 Jun 2020 00:40:51 +0000 (17:40 -0700)]
Merge tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"I've managed to get xfstests kind of working with afs. Here are a set
of patches that fix most of the bugs found.
There are a number of primary issues:
- Incorrect handling of mtime and non-handling of ctime. It might be
argued, that the latter isn't a bug since the AFS protocol doesn't
support ctime, but I should probably still update it locally.
- Shared-write mmap, truncate and writeback bugs. This includes not
changing i_size under the callback lock, overwriting local i_size
with the reply from the server after a partial writeback, not
limiting the writeback from an mmapped page to EOF.
- Checks for an abort code indicating that the primary vnode in an
operation was deleted by a third-party are done in the wrong place.
- Silly rename bugs. This includes an incomplete conversion to the
new operation handling, duplicate nlink handling, nlink changing
not being done inside the callback lock and insufficient handling
of third-party conflicting directory changes.
And some secondary ones:
- The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.
- Remove a couple of unused or incompletely used bits.
- Remove a couple of redundant success checks.
These seem to fix all the data-corruption bugs found by
./check -afs -g quick
along with the obvious silly rename bugs and time bugs.
There are still some test failures, but they seem to fall into two
classes: firstly, the authentication/security model is different to
the standard UNIX model and permission is arbitrated by the server and
cached locally; and secondly, there are a number of features that AFS
does not support (such as mknod). But in these cases, the tests
themselves need to be adapted or skipped.
Using the in-kernel afs client with xfstests also found a bug in the
AuriStor AFS server that has been fixed for a future release"
* tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix silly rename
afs: afs_vnode_commit_status() doesn't need to check the RPC error
afs: Fix use of afs_check_for_remote_deletion()
afs: Remove afs_operation::abort_code
afs: Fix yfs_fs_fetch_status() to honour vnode selector
afs: Remove yfs_fs_fetch_file_status() as it's not used
afs: Fix the mapping of the UAEOVERFLOW abort code
afs: Fix truncation issues and mmap writeback size
afs: Concoct ctimes
afs: Fix EOF corruption
afs: afs_write_end() should change i_size under the right lock
afs: Fix non-setting of mtime when writing into mmap
Randy Dunlap [Mon, 15 Jun 2020 02:59:07 +0000 (19:59 -0700)]
Documentation: remove SH-5 index entries
Remove SH-5 documentation index entries following the removal
of SH-5 source code.
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Linus Torvalds [Wed, 17 Jun 2020 00:23:57 +0000 (17:23 -0700)]
Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should no
longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size
for the array declaration entirely:
This is the way the kernel expects dynamically sized trailing elements
to be declared. It allows the compiler to generate errors when the
flexible array does not occur last in the structure, which helps to
prevent some kind of undefined behavior[3] bugs from being
inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via
sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
instance, there is no mechanism that warns us that the following
application of the sizeof() operator to a zero-length array always
results in zero:
At the last line of code above, size turns out to be zero, when one
might have thought it represents the total size in bytes of the
dynamic memory recently allocated for the trailing array items. Here
are a couple examples of this issue[4][5].
Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such
operators will be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through
the use of a flexible array member:
Arvind Sankar [Tue, 16 Jun 2020 22:25:47 +0000 (18:25 -0400)]
x86/purgatory: Add -fno-stack-protector
The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.
If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).
This will break the build since commit e4160b2e4b02 ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.
Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Tue, 16 Jun 2020 23:16:24 +0000 (16:16 -0700)]
Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-16
This series contains fixes to e1000 and e1000e.
Chen fixes an e1000e issue where systems could be waken via WoL, even
though the user has disabled the wakeup bit via sysfs.
Vaibhav Gupta updates the e1000 driver to clean up the legacy Power
Management hooks.
Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP
preprocessor tags, which also resolves the compiler warnings about the
possibility of unused structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 27 May 2020 13:47:00 +0000 (15:47 +0200)]
e1000e: fix unused-function warning
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:
drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]
Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.
Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Vaibhav Gupta [Mon, 25 May 2020 12:27:10 +0000 (17:57 +0530)]
e1000: use generic power management
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.
e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.
Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Chen Yu [Thu, 21 May 2020 17:59:00 +0000 (01:59 +0800)]
e1000e: Do not wake up the system via WOL if device wakeup is disabled
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver") Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David Howells [Mon, 15 Jun 2020 16:36:58 +0000 (17:36 +0100)]
afs: Fix silly rename
Fix AFS's silly rename by the following means:
(1) Set the destination directory in afs_do_silly_rename() so as to avoid
misbehaviour and indicate that the directory data version will
increment by 1 so as to avoid warnings about unexpected changes in the
DV. Also indicate that the ctime should be updated to avoid xfstest
grumbling.
(2) Note when the server indicates that a directory changed more than we
expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
third party change, checking on successful completion of unlink and
rename.
The problem is that the FS.RemoveFile RPC op doesn't report the status
of the unlinked file, though YFS.RemoveFile2 does. This can be
mitigated by the assumption that if the directory DV cranked by
exactly 1, we can be sure we removed one link from the file; further,
ordinarily in AFS, files cannot be hardlinked across directories, so
if we reduce nlink to 0, the file is deleted.
However, if the directory DV jumps by more than 1, we cannot know if a
third party intervened by adding or removing a link on the file we
just removed a link from.
The same also goes for any vnode that is at the destination of the
FS.Rename RPC op.
(3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
section along with the other attribute updates if ->op_unlinked is set
on the descriptor for the appropriate vnode.
(4) Issue a follow up status fetch to the unlinked file in the event of a
third party conflict that makes it impossible for us to know if we
actually deleted the file or not.
(5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
the user about the nlink of a silly deleted file so that it appears as
0, not 1.
Found with the generic/035 and generic/084 xfstests.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
Ido Schimmel [Tue, 16 Jun 2020 07:14:58 +0000 (10:14 +0300)]
mlxsw: spectrum: Adjust headroom buffers for 8x ports
The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.
On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.
In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.
Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin [Tue, 16 Jun 2020 05:48:58 +0000 (11:18 +0530)]
bareudp: Fixed configuration to avoid having garbage values
Code to initialize the conf structure while gathering the configuration
of the device was missing.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Martin <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen [Tue, 16 Jun 2020 04:35:29 +0000 (06:35 +0200)]
mvpp2: remove module bugfix
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 Jun 2020 03:37:07 +0000 (20:37 -0700)]
tcp: grow window for OOO packets only for SACK flows
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
David Howells [Mon, 15 Jun 2020 23:34:09 +0000 (00:34 +0100)]
afs: Fix use of afs_check_for_remote_deletion()
afs_check_for_remote_deletion() checks to see if error ENOENT is returned
by the server in response to an operation and, if so, marks the primary
vnode as having been deleted as the FID is no longer valid.
However, it's being called from the operation success functions, where no
abort has happened - and if an inline abort is recorded, it's handled by
afs_vnode_commit_status().
Fix this by actually calling the operation aborted method if provided and
having that point to afs_check_for_remote_deletion().
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Mon, 15 Jun 2020 23:23:12 +0000 (00:23 +0100)]
afs: Fix yfs_fs_fetch_status() to honour vnode selector
Fix yfs_fs_fetch_status() to honour the vnode selector in
op->fetch_status.which as does afs_fs_fetch_status() that allows
afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC
call if not implemented by the server.
This doesn't matter in the current code as YFS servers always implement
InlineBulkStatus, but a subsequent will call it on YFS servers too in some
circumstances.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com>
Gaurav Singh [Fri, 12 Jun 2020 18:53:27 +0000 (14:53 -0400)]
bpf, xdp, samples: Fix null pointer dereference in *_user code
Memset on the pointer right after malloc can cause a NULL pointer
deference if it failed to allocate memory. A simple fix is to
replace malloc()/memset() pair with a simple call to calloc().
Fixes: 0fca931a6f21 ("samples/bpf: program demonstrating access to xdp_rxq_info") Signed-off-by: Gaurav Singh <gaurav1086@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 7edd363421dab ("mfd: Add support for PMIC MT6360") Signed-off-by: Gene Chen <gene_chen@richtek.com> Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
[Lee: Taking the opportunity to fix the compatible string too 's/_/-/'] Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
tracing/probe: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
soc: ti: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
tifm: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
dmaengine: tegra-apb: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
stm class: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
Squashfs: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
ASoC: SOF: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
ima: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
sctp: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
phy: samsung: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
RxRPC: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
rapidio: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
media: pwc: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
firmware: pcdp: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
oprofile: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
block: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
tools/testing/nvdimm: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
libata: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
kprobes: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
keys: encrypted-type: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
kexec: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
KVM: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
jffs2: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
ibft: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
samples: mei: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
ia64: kernel: unwind_i.h: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
FS-Cache: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
firewire: ohci: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
cb710: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
drm/edid: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
drbd: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
crypto: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
can: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
can: peak_canfd: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
dmaengine: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
ARM: tegra: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
aio: Replace zero-length array with flexible-array
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
firmware: google: vpd: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
firmware: google: memconsole: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
firmware: dmi-sysfs: Replace zero-length array with flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
remove dependency between mlx5, act_ct, nf_flow_table
Some exported functions from act_ct and nf_flow_table being used in mlx5_core.
This leads that mlx5 module always require act_ct and nf_flow_table modules.
Those small exported functions can be moved to the header files to
avoid this module dependency.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Sun, 14 Jun 2020 11:12:49 +0000 (14:12 +0300)]
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
Currently, nf_flow_table_offload_add/del_cb are exported by nf_flow_table
module, therefore modules using them will have hard-dependency
on nf_flow_table and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use this API.
To relax the hard-dependency between the modules, we unexport these
functions and make them static inline.
Fixes: 978703f42549 ("netfilter: flowtable: Add API for registering to flow table events") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alaa Hleihel [Sun, 14 Jun 2020 11:12:48 +0000 (14:12 +0300)]
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
Currently, tcf_ct_flow_table_restore_skb is exported by act_ct
module, therefore modules using it will have hard-dependency
on act_ct and will require loading it all the time.
This can lead to an unnecessary overhead on systems that do not
use hardware connection tracking action (ct_metadata action) in
the first place.
To relax the hard-dependency between the modules, we unexport this
function and make it a static inline one.
Fixes: 30b0cf90c6dd ("net/sched: act_ct: Support restoring conntrack info on skbs") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko [Mon, 15 Jun 2020 21:49:26 +0000 (14:49 -0700)]
bpf: Fix definition of bpf_ringbuf_output() helper in UAPI comments
Fix definition of bpf_ringbuf_output() in UAPI header comments, which is used
to generate libbpf's bpf_helper_defs.h header. Return value is a number (error
code), not a pointer.
Sasha Levin [Mon, 15 Jun 2020 22:24:27 +0000 (18:24 -0400)]
scripts/decode_stacktrace: warn when modpath is needed but is unset
When a user tries to parse a symbol located inside a module he must have
modpath set. Otherwise, decode_stacktrace won't be able to parse the
symbol correctly.
Right now the failure is silent and easily missed by the user. What's
worse is that by the time the user realizes what happened (or someone on
LKML asks him to add the modpath and re-run), he might have already got
rid of the vmlinux/modules.
Vladimir Oltean [Sun, 14 Jun 2020 20:54:09 +0000 (23:54 +0300)]
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
It isn't actually described clearly at all in UM10944.pdf, but on TX of
a management frame (such as PTP), this needs to happen:
- The destination MAC address (i.e. 01-80-c2-00-00-0e), along with the
desired destination port, need to be installed in one of the 4
management slots of the switch, over SPI.
- The host can poll over SPI for that management slot's ENFPORT field.
That gets unset when the switch has matched the slot to the frame.
And therein lies the problem. ENFPORT does not mean that the packet has
been transmitted. Just that it has been received over the CPU port, and
that the mgmt slot is yet again available.
This is relevant because of what we are doing in sja1105_ptp_txtstamp_skb,
which is called right after sja1105_mgmt_xmit. We are in a hard
real-time deadline, since the hardware only gives us 24 bits of TX
timestamp, so we need to read the full PTP clock to reconstruct it.
Because we're in a hurry (in an attempt to make sure that we have a full
64-bit PTP time which is as close as possible to the actual transmission
time of the frame, to avoid 24-bit wraparounds), first we read the PTP
clock, then we poll for the TX timestamp to become available.
But of course, we don't know for sure that the frame has been
transmitted when we read the full PTP clock. We had assumed that ENFPORT
means it has, but the assumption is incorrect. And while in most
real-life scenarios this has never been caught due to software delays,
nowhere is this fact more obvious than with a tc-taprio offload, where
PTP traffic gets a small timeslot very rarely (example: 1 packet per 10
ms). In that case, we will be reading the PTP clock for timestamp
reconstruction too early (before the packet has been transmitted), and
this renders the reconstruction procedure incorrect (see the assumptions
described in the comments found on function sja1105_tstamp_reconstruct).
So the PTP TX timestamps will be off by 1<<24 clock ticks, or 135 ms
(1 tick is 8 ns).
So fix this case of premature optimization by simply reordering the
sja1105_ptpegr_ts_poll and the sja1105_ptpclkval_read function calls. It
turns out that in practice, the 135 ms hard deadline for PTP timestamp
wraparound is not so hard, since even the most bandwidth-intensive PTP
profiles, such as 802.1AS-2011, have a sync frame interval of 125 ms.
So if we couldn't deliver a timestamp in 135 ms (which we can), we're
toast and have much bigger problems anyway.
Fixes: 47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 13 Jun 2020 20:59:30 +0000 (23:59 +0300)]
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
I no longer work for Cogent Embedded (but my old email still works :-)),
and still would like to continue looking after the Renesas Ethernet drivers
and bindings. Let's switch to my private email.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
Aditya Pakki [Fri, 12 Jun 2020 20:27:55 +0000 (15:27 -0500)]
rocker: fix incorrect error handling in dma_rings_init
In rocker_dma_rings_init, the goto blocks in case of errors
caused by the functions rocker_dma_cmd_ring_waits_alloc() and
rocker_dma_ring_create() are incorrect. The patch fixes the
order consistent with cleanup in rocker_dma_rings_fini().
Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
During development we tried to make the interrupt handling as fine-grained
as possible with TX and RX interrupts being disabled/enabled independently
and the counter registers reset from workqueue context.
Unfortunately after thorough testing of current mainline, we noticed the
driver has become unstable under heavy load. While this is hard to
reproduce, it's quite consistent in the driver's current form.
This patch proposes to go back to the previous approach of doing all
processing in napi context with all interrupts masked in order to make the
driver usable in mainline linux. This doesn't impact the performance on
pumpkin boards at all and it's in line with what many ethernet drivers do
in mainline linux anyway.
At the same time we're adding a FIXME comment about the need to improve
the interrupt handling.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wang Hai [Thu, 11 Jun 2020 07:57:50 +0000 (15:57 +0800)]
mld: fix memory leak in ipv6_mc_destroy_dev()
Commit a84d01647989 ("mld: fix memory leak in mld_del_delrec()") fixed
the memory leak of MLD, but missing the ipv6_mc_destroy_dev() path, in
which mca_sources are leaked after ma_put().
Using ip6_mc_clear_src() to take care of the missing free.
Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sun, 14 Jun 2020 23:57:10 +0000 (19:57 -0400)]
bnxt_en: Return from timer if interface is not in open state.
This will avoid many uneccessary error logs when driver or firmware is
in reset.
Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 14 Jun 2020 23:57:09 +0000 (19:57 -0400)]
bnxt_en: Fix AER reset logic on 57500 chips.
AER reset should follow the same steps as suspend/resume. We need to
free context memory during AER reset and allocate new context memory
during recovery by calling bnxt_hwrm_func_qcaps(). We also need
to call bnxt_reenable_sriov() to restore the VFs.
Fixes: bae361c54fb6 ("bnxt_en: Improve AER slot reset.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 14 Jun 2020 23:57:08 +0000 (19:57 -0400)]
bnxt_en: Re-enable SRIOV during resume.
If VFs are enabled, we need to re-configure them during resume because
firmware has been reset while resuming. Otherwise, the VFs won't
work after resume.
Fixes: c16d4ee0e397 ("bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sun, 14 Jun 2020 23:57:07 +0000 (19:57 -0400)]
bnxt_en: Simplify bnxt_resume().
The separate steps we do in bnxt_resume() can be done more simply by
calling bnxt_hwrm_func_qcaps(). This change will add an extra
__bnxt_hwrm_func_qcaps() call which is needed anyway on older
firmware.
Fixes: f9b69d7f6279 ("bnxt_en: Fix suspend/resume path on 57500 chips") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 15 Jun 2020 16:42:44 +0000 (19:42 +0300)]
MAINTAINERS: merge entries for felix and ocelot drivers
The ocelot switchdev driver also provides a set of library functions for
the felix DSA driver, which in practice means that most of the patches
will be of interest to both groups of driver maintainers.
So, as also suggested in the discussion here, let's merge the 2 entries
into a single larger one:
https://www.spinics.net/lists/netdev/msg657412.html
Note that the entry has been renamed into "OCELOT SWITCH" since neither
Vitesse nor Microsemi exist any longer as company names, instead they
are now named Microchip (which again might be subject to change in the
future), so use the device family name instead.
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zekun Shen [Mon, 15 Jun 2020 15:50:29 +0000 (11:50 -0400)]
net: alx: fix race condition in alx_remove
There is a race condition exist during termination. The path is
alx_stop and then alx_remove. An alx_schedule_link_check could be called
before alx_stop by interrupt handler and invoke alx_link_check later.
Alx_stop frees the napis, and alx_remove cancels any pending works.
If any of the work is scheduled before termination and invoked before
alx_remove, a null-ptr-deref occurs because both expect alx->napis[i].
This patch fix the race condition by moving cancel_work_sync functions
before alx_free_napis inside alx_stop. Because interrupt handler can call
alx_schedule_link_check again, alx_free_irq is moved before
cancel_work_sync calls too.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / mirror_ubuntu-kernels.git / log