Complete the driver configuration, reading the negotiated features,
before using the VQs in the virtio_vsock_probe().
Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b64bf5464ad56be06c4d6042be2284116db0ac48) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.
Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 10c6cb867ffa827a8364d0c481ec1438cd594652) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c07a9d2a1d1d4aa903c92032258531995fb211eb) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The new PMU for s390 counts the execution of certain CPU instructions.
The root cause is the extremely small run time of the mytest program. It
just executes some assembly instructions and then exits.
In above invocation the instruction is executed exactly one time (-c1
option). The PMU is expected to report this one time execution by a
counter value of one, but fails to do so in some cases, not all.
Debugging reveals the invocation of the child process is done
*before* the counter events are installed and enabled.
Tracing reveals that sometimes the child process starts and exits before
the event is installed on all CPUs. The more CPUs the machine has, the
more often this miscount happens.
Fix this by reversing the start of the work load after the events have
been installed on the specified CPUs. Now the comment also matches the
code.
Output after:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes: fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault") Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220128144055.207267-1-daniel.thompson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c532caa7df8c5c6ce8d5d09c378d9e6e010c0058) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.
Fixes: 6f081693e7b2b ("sunrpc: remove an offlined xprt using sysfs") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 4ee7a4b67770e2c0e62ff8fcc4cd31c0efe740bf) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 6195af5ad80198d43e8ec969d06731db2368c4c3) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 6bbfe9a715ea075114213c6c8b30dbd2adc9624d) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When "driver_async_probe=nulltty" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
environment strings, polluting them.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty
Change the return value of the __setup function to 1 to indicate
that the __setup option has been handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed") Cc: Feng Tang <feng.tang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 104852921ff6c87c84b782df46d269db8d2d0595) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:
/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status
Fixes: a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core") Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Acked-By: Julius Werner <jwerner@chromium.org> Signed-off-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20220225041502.1901806-1-davidgow@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 20fab30930f368b0fe06ea2a934326bdb7d08dc8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite") Cc: kgdb-bugreport@lists.sourceforge.net Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit af6e1b06d0ba37494d7cd821ae753342c5c1a629) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
acrn_vm_ram_map can't pin the user pages with VM_PFNMAP flag
by calling get_user_pages_fast(), the PA(physical pages)
may be mapped by kernel driver and set PFNMAP flag.
This patch fixes logic to setup EPT mapping for PFN mapped RAM region
by checking the memory attribute before adding EPT mapping for them.
Fixes: 88f537d5e8dd ("virt: acrn: Introduce EPT mapping management") Signed-off-by: Yonghua Huang <yonghua.huang@intel.com> Signed-off-by: Fei Li <fei1.li@intel.com> Link: https://lore.kernel.org/r/20220228022212.419406-1-yonghua.huang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b9c43aa0b18da5619aac347d54cb67fe30d1f884) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Reported-by: Gilles Buloz <gilles.buloz@kontron.com> Tested-by: Gilles Buloz <gilles.buloz@kontron.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 16e3238047322c3967e601b2813a10837fb2acb9) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic") Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc") Cc: He Zhe <zhe.he@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: kgdb-bugreport@lists.sourceforge.net Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: linux-serial@vger.kernel.org Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a885e17cf5f2dd6606abe825a001fd09a5c29c2e) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()") Cc: Jingoo Han <jg1.han@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit e1338178f35e9520bd406cdd1258709984da5c0a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon") Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit e35a555b5a9d32479933507c7372424fa5294770) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.
Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c52703355766c347f270df222a744e0c491a02f2) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c6f009fe90f1648cd67c636bb495e80af915c115) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-7-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a843ba2e9c875b4ad5eb2e8ec822c46f6d8a5ece) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 070d46aee1513210ad5471569508d6046ae1e3d4) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 1190c1a5828a1d1e0eff8de1683495c0dcc6b69d) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a8d236a32934cb60377e933954289f1a70340c9a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.
GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".
Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
check 'priv->clk' before 'imx_mu_read()' otherwise crash happens on
i.mx8ulp, since clock not enabled.
Fixes: 4f0b776ef5831 ("mailbox: imx-mailbox: support i.MX8ULP MU") Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 8bddc0227e78edea1da2da357d1e184ccd2c25e8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 613e1b253f6dfa9e68c14e2b7db1bf170ddff2e8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Fixes: 278d744c46fd ("remoteproc: qcom: Fix potential device node leaks") Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220308064522.13804-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit bd4771ba2cf9e18473a42b5b70175e50d67a64bb) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
The > needs to be >= to prevent an off by one access.
Fixes: d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220228075014.GD13685@kili Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 4b8a71f206c94445317179b79d7f91996f40dcfc) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support") Reported-by: David Wolfe <david.wolfe@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 4bd979ee9927ba06f9156eea57c5b9d5e4b748ff) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Joerg Roedel <joro@8bytes.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit c39a750b61f7b3a37243461f066b969ed27d1094) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Fix an endless loop in recv_func. If pending_frame is not NULL, we're
stuck in the while loop forever. We have to call rtw_alloc_recvframe
each time we loop.
Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver") Reported-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220226181457.1138035-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 872a7b12af43fa6e5de0ff51b6ee9590f05d28a3) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:
- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
tear down RTS too early
This fix bases on research done by Steffen Trumtrar.
The use of mapping_set_error() in conjunction with calls to
filemap_check_errors() is problematic because every error gets reported
as either an EIO or an ENOSPC by filemap_check_errors() in functions
such as filemap_write_and_wait() or filemap_write_and_wait_range().
In almost all cases, we prefer to use the more nuanced wb errors.
Fixes: b8946d7bfb94 ("NFS: Revalidate the file mapping on all fatal writeback errors") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit ba3a3390c9b17abd71ac44f4a8f7647f3e4e01fc) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Just like every other family BCM4908 should get its own enum value. That
is required to properly handle it in chipset conditional code.
The real change is excluding BCM4908 from the PLL reprogramming code
(see brcmusb_usb3_pll_54mhz()). I'm not sure what's the BCM4908
reference clock frequency but:
1. BCM4908 custom driver from Broadcom's SDK doesn't reprogram PLL
2. Doing that in Linux driver stopped PHY handling some USB 3.0 devices
This change makes USB 3.0 PHY recognize e.g.:
1. 04e8:6860 - Samsung Electronics Co., Ltd Galaxy series, misc. (MTP mode)
2. 1058:259f - Western Digital My Passport 259F
Broadcom's STB SoCs come with a set of SUN_TOP_CTRL_* registers that
allow reading chip family and product ids. Such a block & register is
missing on BCM4908 so this commit introduces "compatible" string
specific binding.
Fixes: 4b402fa8e0b7 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220218172459.10431-1-zajec5@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 675216a820ec49563e1804d22624504421c15742) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: dddc97e82303 ("phy: dphy: Add configuration helpers") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <mripard@kernel.org> Cc: Guido Günther <agx@sigxcpu.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d9a3c2949d04715f802c10351efbee940e4c9f7a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de> Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit ca3d7cf53d8f6e83759afc25cf763888a07a8b33) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The checker failed to validate all enum IDs in the description of a
register with fixed-width register fields, due to a miscalculation of
the number of described states: each register field of n bits can have
"1 << n" possible states, not "1".
Increase SH_PFC_MAX_ENUMS accordingly, now more enum IDs are checked
(SH-Mobile AG5 has more than 4000 enum IDs defined).
The second video-in channel on RZ/G1C has only 12 data lanes, but the
pin control driver uses the vin_data union, which is meant for 24 data
lanes, thus wasting space.
The bit reversal was wrong for bits 1 and 3 of the 5 bits.
Result is driver failure to probe if you have more than 2 daisy-chained
devices. Discovered via QEMU based device emulation.
Fixes tag is for when this moved from a macro to a function, but it
was broken before that.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Fixes: 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse") Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-2-jic23@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 157a22ca80c50f64c495767331045d501c9ff013) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Commit 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes: 54da3e381c2b ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping") Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit d6c4fc0d903fbcc8e1190ed12bfd80f5d031c41f) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The mma8452_driver declares both of_match_table and i2c_driver.id_table
match-tables, but its probe() function only checked for of matches.
Add support for i2c_device_id matches. This fixes the driver not loading
on some x86 tablets (e.g. the Nextbook Ares 8) where the i2c_client is
instantiated by platform code using an i2c_device_id.
Drop of_match_ptr() protection to avoid unused warning.
Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220208124336.511884-1-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 011e841cd11b85d7f67997f3ed2f2abaad3b8bf7) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When clearing the group configurations, the driver fails to restore the
default setting for DSA 1.x based devices. Add defaults in
idxd_groups_clear_state() for traffic class configuration.
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers"
in order to make the concept clearer. Deprecate bandwidth token
naming in the driver and convert to read buffers in order to match with
the spec and reduce confusion when reading the spec.
DSA spec 1.2 has moved the GENCFG register under the GENCAP configuration
support with respect to writability. Add check in driver before writing to
GENCFG register.
Fix PCI-E clock related kernel oops that are caused by a missing clock
parent.
pcie0_rchng_clk_src has num_parents set to 2 but only one parent is
actually set via parent_hws, it should also have "XO" defined.
This will cause the kernel to panic on a NULL pointer in
clk_core_get_parent_by_index().
So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent
data.
Since there is already an existing static const char * const gcc_xo_gpll0[]
used to provide the same parents via parent_names convert those users to
clk_parent_data as well.
Without this earlycon is needed to even catch the OOPS as it will reset
the board before serial is initialized with the following:
The fuse consists of 64 bits, with this statement we're supposed to get
the upper 32 bits but it actually read out of bounds and got 0 instead
of the desired value which lead to the "PVS bin not set." codepath being
run resetting our pvs value.
Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 251aabcb0b0925cc63f595a1d6d6485feb3119dd) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
A struct device can never be devm_alloc()'ed.
Here, it is embedded in "struct fsi_master", and "struct fsi_master" is
embedded in "struct fsi_master_aspeed".
Since "struct device" is embedded, the data structure embedding it must be
released with the release function, as is already done here.
So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and
update all error handling branches accordingly.
This prevent a potential double free().
This also fix another issue if opb_readl() fails. Instead of a direct
return, it now jumps in the error handling path.
If the pps-gpio driver was probed prior to the GPIO device it uses, the
devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe
replaced that error code with -EINVAL, causing the pps-gpio probe to
fail and not be retried later. Propagate the error return value so that
deferred probe works properly.
Fixes: 161520451dfa (pps: new client driver using GPIO) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> Link: https://lore.kernel.org/r/20220112205214.2060954-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 8adfd166fb3217336515ff2960fddc712f98af37) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When a driver calls pwmchip_add() it has to be prepared to immediately
get its callbacks called. So move allocation of driver data and hardware
initialization before the call to pwmchip_add().
This fixes a potential NULL pointer exception and a race condition on
register writes.
Fixes: 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 6f4f778f2747c23a14bda72df6bf5a445b68fee2) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In commit f72ddbe1d7b7 ("fsi: scom: Remove retries") the retries were
removed from get and put scoms. That patch missed the retires in get and
put indirect scom.
For the same reason, remove them from the scom driver to allow the
caller to decide to retry.
This removes the following special case which would have caused the
retry code to return early:
Fixes: f72ddbe1d7b7 ("fsi: scom: Remove retries") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211207033811.518981-3-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 28a886a308ed5221557bcc8d812e0cf0228501a8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
SCOM error handling is made complex by trying to pass around two bits of
information: the function return code, and a status parameter that
represents the CFAM error status register.
The commit f72ddbe1d7b7 ("fsi: scom: Remove retries") removed the
"hidden" retries in the SCOM driver, in preference of allowing the
calling code (userspace or driver) to decide how to handle a failed
SCOM. However it introduced a bug by attempting to be smart about the
return codes that were "errors" and which were ok to fall through to the
status register parsing.
We get the following errors:
- EINVAL or ENXIO, for indirect scoms where the value is invalid
- EINVAL, where the size or address is incorrect
- EIO or ETIMEOUT, where FSI write failed (aspeed master)
- EAGAIN, where the master detected a crc error (GPIO master only)
- EBUSY, where the bus is disabled (GPIO master in external mode)
In all of these cases we should fail the SCOM read/write and return the
error.
Thanks to Dan Carpenter for the detailed bug report.
When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.
Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too.
Fixes: 6769140d3047 ("tty: mxser: use the tty_port_open method") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220124071430.14907-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit b125b08dbee3611f03f53b71471813ed4ccafcdd) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In function load_firmware() release_firmware() is not called if the
allocation of pFirmware->szFwBuffer fails or if fw->size is greater
than FW_8188E_SIZE.
Move the call to release_firmware() to the exit label at the end of
the function to fix this.
Fixes: 8cd574e6af54 ("staging: r8188eu: introduce new hal dir for RTL8188eu driver") Signed-off-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20220107103620.15648-4-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 7a68abde36e1480fa4ad08a3229bb8d6a5355d47) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Convert DBG_88E_LEVEL macro call in hal/rtl8188e_hal_init.c to plain
dev_dbg call, as although the information is potentially useful, we should
be exposing it using standard kernel debugging functionality.
Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource(). And it's required to release the resource using
free_resource(). Howerver, many people use kfree directly which will
result in kernel BUG. In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case.
Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com Fixes: ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit a9e88c2618d228d7a4e7e515cf30dc0d0d813f27) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.
The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.
Fix this by calling the return-friendly pm_runtime_resume_and_get
function.
Fixes: d43c65b05b84 ("ethtool: runtime-resume netdev parent in ethnl_ops_begin") Signed-off-by: Jan Sondhauss <jan.sondhauss@wago.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220323084725.65864-1-jan.sondhauss@wago.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 585dc196a08fccdcd1b7fcf473cf566b34c4b840) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
ice_send_event_to_aux() eventually descends to mutex_lock()
(-> might_sched()), so it must not be called under non-task
context. However, at least two fixes have happened already for the
bug splats occurred due to this function being called from atomic
context.
To make the emergency landings softer, bail out early when executed
in non-task context emitting a warn splat only once. This way we
trade some events being potentially lost for system stability and
avoid any related hangs and crashes.
Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit eec20eea27a089eacde240e1661c0da2b29fef4e) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Michal Kubiak <michal.kubiak@intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9b77c8cf69a41d1e3851370aeaa04a9ea83b865c) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
In the timer callback function tipc_sk_timeout(), we're trying to
reschedule another timeout to retransmit a setup request if destination
link is congested. But we use the incorrect timeout value
(msecs_to_jiffies(100)) instead of (jiffies + msecs_to_jiffies(100)),
so that the timer expires immediately, it's irrelevant for original
description.
In this commit we correct the timeout value in sk_reset_timer()
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket") Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20220321042229.314288-1-hoang.h.le@dektech.com.au Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 21a2b4ab48a4878205825f2c8344a49edad8476d) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.
The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.
Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes: 5d50aa83e2c8 ("openvswitch: support asymmetric conntrack") Cc: Dumitru Ceara <dceara@redhat.com> Cc: Numan Siddique <nusiddiq@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 894347d4d29bcdaa4ed3e817cf4dd88fafb48e9c) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.
Thanks to Wei for helping zero in on the problem and the fix!
Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages") Reported-by: Andre Nash <alnash@fb.com> Reported-by: Neil Spring <ntspring@fb.com> Reviewed-by: Wei Wang <weiwan@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 862002402333683fada5844fec46d8a099e0dac5) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:
The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.
Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.
Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems with this commit are targeted at relaxing only
the performance critical code paths after assuring proper barriers.
Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors") Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045358.224350-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 06d836801cd82ded282aaf9e888ff9e7e4a88b91) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Some ATI SB600 USB adapters advertise MSI, but if INTx is disabled by
setting PCI_COMMAND_INTX_DISABLE, MSI doesn't work either. The PCI/PCIe
specs do not require software to set PCI_COMMAND_INTX_DISABLE when enabling
MSI, but Linux has done that for many years.
Mick reported that 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI
devices") broke these devices. Prior to 306c54d0edb6, they used INTx.
Starting with 306c54d0edb6, they use MSI, and and the fact that Linux sets
PCI_COMMAND_INTX_DISABLE means both INTx and MSI are disabled on these
devices.
Avoid this SB600 defect by disabling MSI so we use INTx as before.
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
In remove_phb_dynamic() we use &phb->io_resource, after we've called
device_unregister(&host_bridge->dev). But the unregister may have freed
phb, because pcibios_free_controller_deferred() is the release function
for the host_bridge.
If there are no outstanding references when we call device_unregister()
then phb will be freed out from under us.
This has gone mainly unnoticed, but with slub_debug and page_poison
enabled it can lead to a crash:
To avoid it, we can take a reference to the host_bridge->dev until we're
done using phb. Then when we drop the reference the phb will be freed.
Fixes: 2dd9c11b9d4d ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <zdai@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 33d39efb61a84e055ca2386157d39ebbdf6b7d31) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.
Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 226ec1997de7c4836f542dcbc7d84dc1a7fc14aa) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
The function sets the pernet boolean to avoid the spurious warning from
nf_ct_lookup_helper() when assigning conntrack helpers via nftables.
Fixes: 1a64edf54f55 ("netfilter: nft_ct: add helper set support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 0ee072f91326d4a616098fb55c9e0e8e6a399642) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Having meson_i2c_set_clk_div after i2c_add_adapter
causes issues for client drivers that try to use
the bus before the requested speed is applied.
The bus can be used just after i2c_add_adapter, so
move i2c_add_adapter to the final step as
meson_i2c_set_clk_div needs to be called before
the bus is used.
Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Lucas Tanure <tanure@linux.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9b2bbf36b9cff18c4469c0f016b023adc27904d8) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.
Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.
To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/
The way to trigger this issue is e.g. through monitoring the BRVLAN group:
# bridge monitor vlan &
# ip link add name br type bridge
Which produces the following citation:
UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
shift exponent 32 is too large for 32-bit type 'int'
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 9151982547ee92ed4a5ad5bfb609b3b5febca881) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
That happened because hdev->power_on is already called before
sdio_set_drvdata which btmtksdio_interrupt handler relies on is not
properly set up.
The details are shown as the below: hci_register_dev would run
queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI
workqueue_struct to complete the power-on sequeunce and thus hci_power_on
may run before sdio_set_drvdata is done in btmtksdio_probe.
The hci_dev_do_open in hci_power_on would initialize the device and enable
the interrupt and thus it is possible that btmtksdio_interrupt is being
called right before sdio_set_drvdata is filled out.
When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled
, the kernel oops is going to happen because btmtksdio_interrupt access an
uninitialized pointer.
Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 770a97d3f34b801de1b04737b43e02c55118c41a) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
hci_le_conn_failed function's documentation says that the caller must
hold hdev->lock. The only callsite that does not hold that lock is
hci_le_conn_failed. The other 3 callsites hold the hdev->lock very
locally. The solution is to hold the lock during the call to
hci_le_conn_failed.
Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 60283d3ad3955e68d91c132ff37d145a20261391) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
projects / mirror_ubuntu-jammy-kernel.git / log